Itunes does not sync after upgrade to iPhone 5s from 4s, same user id

I have upgraded from iPhone 4s to 5s, but my Windows 8 laptop itunes keeps trying to sync with old iphone 4s (which I do not use anymore) and my new iphone 5s does not sync at all with itunes in Windows 8 laptop. I am using same apple id for iPhone 5s that I used for iPhone 4s. Please help me so that I can sync my iPhone 5s with the existing itunes in Windows 8 laptop.

Apparently something is not being saved somewhere and this technique forces the save.  Below is a C&P from another poster describing the technique on a different thread.  It's been working for him for some fifteen hours.  I tried it and it's been working but it's been only ten minutes.  My gut feel is that quitting and relaunching iTunes are critical steps.
With the device connected via cable, click on its icon
Uncheck WiFi syncing
Click Apply
Quit iTunes
Launch iTunes
Check WiFi syncing
Click Apply

Similar Messages

  • After upgrade to Yosemite iTunes does not sync with iPad or iPhone 5

    iTunes on Mac does not sync with my iPad or iPhone after upgrade to Yosemite

    It just started to sync.  Forget the question.

  • ITunes does not start after upgrade

    I'm sorry if this has already been answered, but I've looked everywhere and can't find a solution to this.
    After recently getting the software upgrade for iTunes, It does not boot anymore. After accepting the iTunes agreement i get this error message
    "The iTunes application could not be opened. An unknown error occured (-50)."
    Uninstalling and reinstalling doesn't help. I've read some solutions for this on the windows machines and it has something to do with the sound card I believe.
    G4 Mac OS X (10.4.6)

    ok, so I am not sure if this is legal or not, but there is a site called oldversion. Go there, and you can get past versions of applications such as aim , and in this case, itunes. just uninstall your other itunes first.
    Sometimes different versions of appications run better on different computers. this new itunes probably just has something the last one didnt that cant run with what you have on your computer

  • ITunes does not load after upgrading to 7.4.2!

    Installed iTunes 7.4.2 just right now. When I try to start it, all it will do is quickly flash "iTunes" in the menu bar without starting; sometimes not even that will occur. I opened the Activity Monitor to watch the app; iTunes does appear to start when I double-click by showing up in the monitor; however, after a few seconds it disappears.
    Anybody know what's going on?

    Do you have QuickTime 7.2 installed from the Apple website?
    Make sure to remove any "hackies", betas, and ShapeShifter, if installed.
    Go to /Library/Receipts/drag iTunesX.pkg to the trash and empty.
    Repair permissions ..... RESTART
    Reinstall iTunes 7.4.2 (Mac) from the Apple website +without performing any other processes during the download or install!+
    Repair Permissions
    DIXIE

  • Check-out button is not disable after the check out request from the same user

    HI all,
            I want to use check out/ in procedure in solution manager along with email notification. For that, I have maintained required settings and maintenance project for the intended solution. I want to implement a team leader- manger hiearchy for any changes to the solution. When a team member requests for the check out for any process scenario/ step, the status goes to check out requested. But, the problem is, check-out button is not disable and same user can do the check out which I want to restrict. The check out can be done only by the project manger. I guess, this is related to authorization roles for both team member and manger. But I am not able to find out. Please help me to have the authorization roles for this.
    Thanks,
    Rutvik Upadhyay.

    Why not putting a af:fileDownloadActionListener inside the command button. In the bean you need an method like
        public void exportExcel(FacesContext aFacesContext, OutputStream aOutputStream)
    } You can use the output stream and when you finished just flush it. Don't close the stream and don't complete the response.
    Timo

  • My problem is that since I update my iphone 4s ios 8 and then restore it and when I connect to itunes does not sync my music only applications

    my problem is that since I update my iphone 4s ios 8 and then restore it and when I connect to itunes does not sync my music only applications

    I had a similar issue and I was told that my iTunes match was on.
    I had to disable iTunes match on my iPhone.
    Following which - after you plugged in your iPhone to iTunes, select your iPhone on iTunes menu. You should see a summary page of your iPhone where it provides options to update or restore. On the bottom there should be an option to select "sync only selected music/playlists". I can't remember the exact wording. Once that's been checked, select your iPhone's music tab and it should allow you to select the music playlists you want to sync.

  • While doing a sync, I received a phone call.  Since then I get a message during sync " Itunes could not sync contacts to the iphone because the sync server failed to sync the iphone.  What to do?

    While doing a sync, I received a phone call.  Since then I get a message during sync "Itunes could not sync contacts to the iphone because the sync server faile to sync the iphone".  What to do?

    I had same problem,,This link solved issue easily
    http://www.question-defense.com/2010/09/01/itunes-could-not-sync-calendars-to-th e-iphone-because-the-sync-server-failed
    I didn't lose any calendar since it was all on the computer in Outlook calendar

  • ITunes does not sync my Outlook calendar with my iPhone calendar

    Problem: iTunes does not sync my Outlook calendar with my iPhone calendar.
    Background: The sync was fine until I got the Lenovo 64 bit with Windows 7. I have tried to follow lots of Q/As.
    Dear iTunes / Apple, This must be solved within iTunes, I believe.
    - Windows 7 Prof, vers 6.1, SP 1, 64 bit
    - iTunes: 11.1.3.8
    - iPhone: 3GS, 32GB, iOS 6.1.3
    - Computer: Lenovo X301, 64 bit
    - Processor: Intel Core 2 Duo 2 CPU U9400 @ 1.4 GHz.
    Sincerely
    Soren

    Hi there nocomano!
    I have an article here that can help you troubleshoot this issue:
    iPhone, iPad, iPod touch: Troubleshooting contact and calendar syncing via USB on Windows
    http://support.apple.com/kb/ht1692
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • Display (Samsung LCD-TV) does not sync after wakeup anymore...

    Configuration:
    Mac Mini early 2009 (nvidia 9400), 2GHz, 4GB Ram, Mac OS 10.6.1
    Samsung 26" LCD-TV, connected to mini-dvi by Apple mini-dvi-to-vga adapter (resolution: 1360*768)
    Problem:
    since upgrading to Snow Leopard, the display will not sync after the mini wakes up from sleep. Works fine after reboot. Also, changing resolution in the control panel does not work with 1360*768.
    All this worked with leopard.
    Any help would be highly appreciated.
    Regards,
    Peter

    I have no solution to this issue, but I've been having the same problem for about 2 weeks now. I never had any other issues with my iPhone in the 15 months I've owned it, but this is causing huge problems for me.
    My computer setup is very similar to the above poster, and I've tried the uninstall and complete reinstall (and every other suggestion I could find) to no avail. iTunes just won't recognise my iPhone and it hangs every time I try to connect it.
    In the iTunes diagnostics (which I can only get to work if I open it before I connect the iPhone) everything is green except the sync tests, which it fails. The help button there is completely useless, Apple's website generally isn't helpful and there's really no other way to get support from them.
    Does anyone have any ideas?

  • ITunes could not sync contacts to the iPhone...the iPhone canceled the sync

    My phone refuses to sync ANY contacts. When iTunesis performing the Sync process, it ends stating that "iTunes could not sync contacts to the iPhone "MyPhone" because the iPhone canceled the sync."
    This happened originally when I was running OS 3.0. As a fix, I upgraded iTunes and then my iPhone to the latest versions - v9.0.1.8 and v3.1.2 respectively.
    I just finished doing a "reset all content and settings" and still no dice. Unfortunately, this won't allow me to sync until after I restore a backup, so I'm sure I'm bringing corrupt data back into the phone.
    I tried changing my contacts to sync to my Windows Address Book, instead of the GMail that I use. No luck.
    HOW can I simply ERASE the contact database on my iPhone so I can get it to sync again?

    ...and an update.
    I tried manually adding some contacts to the phone and they just don't save. The contact list stays empty.

  • ITunes will not launch after upgrade--click, bounce bounce, nada

    iTunes will not launch after upgrade--rebooted nothing--2 bounce icon
    then shut down all and unplugged, restarted--no change, iTunes still will not launch after upgrade
    iTunes current version
    on imac w/10.6.8

    I have the same issue.
    Allready uninstalled iTunes and reinstalled it, but the same problem occurs.
    Icon keeps bouncing, and all that's visible is the first menu-item in the top menu bar, named iTunes. Nothing is clickable though.
    The iPhone Configuration Utility doesn't seem to work either, it crashes on uploading an app to my iPhone. I guess it's using some of iTunes' libs or something.
    Does anyone know how to get iTunes working again? I'm getting pretty desperate over here...
    Thanks!

  • HT4623 itunes could not sync infomation to the iphone because aconnection could not be established to the phone

    itunes could not sync infomation to the iphone because aconnection could not be established to the phone

    [Reposting from another, similar thread which I started]
    Hey.  I "fixed" the issue for myself, although this fix might not be available to you.  I have a home laptop and a work desktop both running W7. I was syncing contacts with my work computer because that's where most of my contacts originate, but it isn't essential that I do so.  I exported my contact database from my work Outlook to a .pst file, dropped it in Dropbox, came home and loaded the updated contacts, and then synced the phone.  It worked fine and I suppose that's how I'll have to do it from now on.
    I've had random problems since our company "upgraded" to a Windows Exchange server with user data getting corrupted.  After the server pushes updates to our desktops, I've had things like Firefox settings disappearing and such.  I assume this was similar and iTunes couldn't find my contact database, or it was corrupted in such a way that it still works fine in Outlook but can't sync.  Anyway, I don't have the time or patience to solve this on the work box and I don't know if I ever could.  My eventual fix (probably coming soon) will be to buy a 4S  
    Good luck with your phone.  Have you tried a restore?

  • Continuous with the problem, the headphone does not work after having my iphone ios 8.0.2 updated

    the headset does not work after having my iphone ios 8.0.2 updated to me is very annoying to have to be answering speakerphone is not private and can not go with the hands-free all the time

    I had the same issue until I updated my apps through iTunes. I had over 100 updates, but none of them showed on my iPod. After they updated everything started syncing like it is supposed. Go to the apps library and check for updates. After everything syncs leave your iPhone/ipod/ipad connected if the spinning arrows at the top is still spinning. It means that things are still being added. If you go to settings > general > about, you will see it loading songs, videos, photos, etc. If you back out of "about" and then go back to it you will see the numbers for each one change.

  • ITunes could not sync ^0 to the iPhone Unknown Error(-19) during 2.1 update

    iTunes could not sync ^0 to the iPhone Unknown Error (-19) during 2.1 update
    Anybody getting this? On a Win XP iTunes 8/ iPhone 3G
    Thanks for any help!

    I got this message. After several hours of frustration...
    I finally did a successful update by following various recommendations in this thread.
    Maybe all or only a combination were necessary:
    1) Deleted my backups. This DOES appear to be necessary, I noticed that the update was always failing when the update was going through the backup process. It was only after I deleted my backups that the update finally worked. To do this, in iTunes go to Edit > Preferences. Click on the Devices tab. Click on (select) the iPhone in the window. Click on the "Delete Backup" button.
    2) Disable automatic syncing for the iPhone (don't know if this was necessary but it's one of the steps I took)
    3) Make sure all your Apps are updated before trying the iPhone update. (Again I don't know if this was necessary but I did it). I updated my apps over wi-fi from the iPhone rather than via iTunes.
    Important!!!!! After you run the update there will be no backup of your iPhone. You need to create a new one. To do this, right click (option-click) on your iPhone in the "Devices" list of iTunes. Select "Back Up" from the context menu.
    Hope this helps!!!!

  • "iTunes could not sync calendars to the iPhone "name" because the sync server failed to sync the iPhone".

    I get the message "iTunes could not sync calendars to the iPhone "name" because the sync server failed to sync the iPhone" every time I sync the iPhone 3GS with iTunes by USB.  Can anyone help? Please !!!!

    I posted the following to "iTunes could not sync calendars to the iPhone "xx" because the sync server failed to sync the iPhone. What does this mean??" at https://discussions.apple.com/message/15820680#15820680
    I haven't seen it mentioned but the secret is to
    Sync only selected calendars
    Select "Remove Calendars" from the popup window
    (This is ambigous: from where are the calendars removed?  From the device being synced to)
    Click apply.
    Oops!  My memory is already gone stale.  I think I left no calendars selected, then clicked apply.  Then I selected the calendars that I wanted, then clicked apply.
    In any case, I had a blank calendar on my iPad and then I had all the updated events that I wanted on my iPad.
    Thanks to all who provided some of the essential clues to resolving this problem.

Maybe you are looking for

  • Standby from active database

    Hello, I am attempting to create a physical standby database, following this guide: http://www.oracle.com/global/uk/education/downloads/uwe_data_guard.pdf as well as the oracle documentation on Data Guard. Using Oracle 11gR2 patched at #7 running on

  • Why can't I use the Feedback Button in 4.0 Beta 1 (it says I need to update)?

    I'm trying to use Firefox 4.0 Beta 1 and wanted to send Feedback. When I click on Feedback it brings up the following text: "Oh! So, you want to offer us feedback on the next version of Firefox. Thank you, but you'll need to be a part of our Beta Pro

  • Adding a boarder to an exported image

    Hi.... Would like to be able to export an image to a given pixel size and add a boarder to the image, I know you can do this via the print module but I can't find a way of setting a size in pixels. Nick

  • Connecting to a Polycomm 8000 unit with a Macbook

    Hi there, We recently purchased a Polycomm video conferencing system for our office and my supervisor is a strictly Mac user outside of the office. I've been looking for options that would allow him to log into the video conferencing unit from the ro

  • Javaw.exe Application error

    I have a COM(VB) dll and this dll is used by a VC++ dll and this VC++ dll is used by the JAVA. When this application of JAVA->VC++-->VB is used on Window 2000 etc the application was working fine. When the same code is used with Windows XP and Micros