ITunes keeps storing files on C drive, even when the library/storage is on another internal drive. It should stop that.

Whatever I do to get iTunes to store it's data and settings on another internal drive, it KEEPS some sort of data/settings stored on the C drive.
A mkdir has been set up already to catch nasty "keep doing that" behaviour. Nevertheless, iTunes dumps stuff on the C drive /documents/mymusic.
Without to receive a technical story (read: a SIMPLE solution that does not feel like a hack), what's the solution.
Why does iTunes not simply ask WHERE to store the files rather than "assuming that the user is stupid and we think for him" attitude.
managing a database or DRM isn't THAT difficult.
Whatever files are within the directory is absolutely fine, as long as the user is allowed to choose that directory.

Did you mean mkdir or mklnk?
By default the iTunes library is stored at C:\Users\<User>\Music. If you play with Windows so that your entire profile is stored on a different drive then the library will be stored inside the profile. If you have used the option to change the location of the media folder to point to another path then you've only changed where the content is stored, not the database and supporting files. In addition if you use this option with an external drive or network share and that location isn't ready when iTunes starts then it will reset the path to the media folder to the default location inside the library folder.
Generally the solution when setting out is to move the entire library to the root of a different drive and then shift-start-iTunes to connect to the library in this new location. See HT1589: iTunes: How to open an alternate iTunes Library file or create a new one
Since you didn't do that to start with, either start again, or see my post make a split library portable.
There is another chunk of data stored in the %appdata% section of your user profile. If you don't have any iOS devices you can ignore this, but if you have, and have an SSD system drive, then there is merit in relocating the ...\MobileSync\Backup folder to another drive with a mklnk junction/symbolic link as these backup folders can become quite large. Note that junctions/links should not be used to relocate sections of the main library as they will be unraveled if iTunes ever tries to write to the path.
tt2

Similar Messages

  • File.exists() returns false even when the file exists

    hi,
    the exists() function of java.io.File function returns false even when the file exists on the file system. why is this? i checked the path of the file which gives me the correct path, but exists returns false. can anyone help?

    post some of the code you�re using - then maybe I can help you out
    //Anders

  • ITunes keeps changing file locations to something wrong when syncing

    I have my music stored on a Synology DS409 NAS which is mounted using afp as /Volumes/music. I also have another mount from the same NAS as /Volumes/photo. Whenever I try syncing my iPhone or an iPod, I get errors about some files not syncing because they could not be played.
    On looking at some of these files in iTunes using Get Info, the location has been changed from its original (correct) /Volumes/music/xx to some random picture file under /Volumes/photo/xx
    I know the original file was correct because I've checked the iTunes Library xml file for any occurrence of "photo" and found none before syncing. I can manually fix the errors by deleting them items from iTunes and re-adding them, but I then get more errors on different files when syncing next.
    I used to have the iTunes server feature turned on on the Synology DS409, but I've turned that off now. I wondered whether it was down to the /Volumes/music file system disappearing occasionally (another issue!) but it has happened even when the music folder is mounted. Very frustrating!
    As a last resort, I could copy the music on to the local disk in my iMac, but that defeats the point of the NAS really. It should work.
    Hope someone can help.
    Thanks

    Click the icon to start iTunes and immediately press and continue to hold down the SHIFT key. This dialog should appear:
    If iTunes opens normally close it and try again. Use Choose Libraray... to open the copy of your library on the external drive. Check the location of the media folder once opened. You can now remove the iTunes folder on C: without it reappearing.
    tt2

  • How to transfer iTunes Music stored in an External Drive that I use for my Windows PC and use it in iTunes on Mac?

    Hi just bought my first Mac (a 2013 13' MacBook Air). Before I owned this computer I used (and still use) a Windows Desktop. My Windows Desktop (which runs Windows 8.1) has a 1TB Hard Drive that was getting pretty full so I moved all of my iTunes Music, Movies, and TV Shows onto a 2TB external hard drive. This meant that iTunes would open/work even if the external hdd was not plugged in, but only when the external HDD is plugged in do I see all of my downloaded/ripped music/movies/tv shows. Now that I own a Mac I would like to do the same thing - have all of my media on an external drive that is plugged in via USB. So my question is (A) how do I make my itunes media stored on this external HDD accesible to the iTunes on my MacBook, (B) do I need to partition the external HDD to do this, and (C) because I fully intend to keep using the drive with my Windows PC (it stores a complete backup as well as a ton of Steam videogames), will I need to totally erase the drive in order to create such a partition?

    Before we can help you, you must tell us how you are backing up your data.
    Allan

  • My laptop had to be reset to factory settings. prior to that i had all my itunes songs stored on a portable drive. how do i get itunes to recognize the drive as its library?

    my laptop had to be reset to factory settings. prior to that i had all my itunes songs stored on a portable drive. how do i get itunes to recognize the drive as its library?

    If the library file is on the external drive, hold <SHIFT> while launching iTunes.  When it prompts to select a library file or create a new one, point it to the location of the library file.
    If the library file was on the internal harddrive, easiest solution is to restore it from the backup.  If no backup exists, use File > Add Folder to library.  Also under Edit > Preferences > Advanced, change the library location unless you want iTunes to move the media to the internal drive.

  • After I installed the latest version of ITunes I get a message saying I'm missing the SQlite3.dll file. I have even unistalled the new version and then re-installed, still same message.

    After I installed the latest version of ITunes I get a message saying I'm missing the SQlite3.dll file. I have even unistalled the new version and then re-installed, still same message.

    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Restart the programme all should be well
    In case that your OS is (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "SQLite3.dll"
    3. Now paste it in the folder  C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Restart the programme, it should not display that message, it should be clear.
    Good Luck

  • I cannot play my playlists through my sonos system. Itunes is stored on a NAS drive

    My Itunes is stored on a Nas drive. I cannot ply my playlists on my sonos music system. All other music fine.

    Basco did you figure this out?

  • Im trying to update my iphone 5s to ios 7.1 but it just keeps sending me an error message even when i am plugged into itunes

    Im trying to update my iphone 5s to ios 7.1 but it just keeps sending me an error message even when i am plugged into itunes

    The exact wording of Error messages and Alerts are imperative in ascertaining your issue.
    Clearly state the Troubleshooting Steps you have tried to Resolve it

  • I lost my hard drive contents and itunes wasn't backed up. Can I recover the library from my iPad?

    I lost my hard drive contents and itunes wasn't backed up. Can I recover the library from my iPad?

    You won't be able to recover you entire library from your iPad but you can recover some of its contents by transferring the purchases back to iTunes. http://support.apple.com/kb/HT1848 This will not transfer anything you did not purchase from iTunes, for example music or video files you had stored on the HD and you put into iTunes. Without a backup that information is gone. One very important thing to keep in mind. Once you sync the iPad to the new iTunes it will remove all the afore mentioned music or video files from the iPad. Do not sync with iTunes if you want to keep those files. Hope that helps.

  • My ipod keeps searching for network, even when the network info is all set properly. It has suddenly started doing this. Also, buffering forever...

    My ipod keeps searching for network, even when the network info is all set properly. It has suddenly started doing this. Also, buffering forever... I have tried to reset the network few times, but not working.

    Hello Nazer_502,
    I would be concerned too if my iPhone was acting this way.  It sounds like it is overheating and not holding a charge. I recommend following the steps listed below when experiencing an issue like this:
    Battery life seems short
    Click ( www.apple.com/batteries/iphone.html) for tips on how to prolong iPhone's battery life.
    Try turning iPhone off and then on again.
    Connect iPhone to iTunes and restore iPhone.
    If the screen shows a low-battery image, the battery is low on power and needs to charge for up to ten minutes before you can use it.
    When charging iPhone, make sure to leave it charging until it is fully charged. You'll know the battery is fully charged when the battery icon in the upper-right corner of the screen looks like this .
    Note: When charging using a computer, don't connect iPhone to a keyboard. Also, the computer must be turned on and not in sleep or standby mode. If iPhone is connected to a computer that's not turned on or is in sleep or standby mode, the iPhone battery may drain.
    You can find the full article here:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I deleted my itunes library (after backing up) now i want to restore from TM to my MBA but its saying there is not enough room even though the library is 22GB and there is 27GB free on my MBA??

    Hi everyone,
    I deleted my itunes library (after backing up to my time machine) to download a large torrent,  now i want to restore my itunes library to my MBA from time machine but its saying there is not enough room on my MBA even though the library is 22GB and there is 27GB free on my MBA??

    Here's something else to consider:
    Since Snow Leopard, OS X uses a Decimal count for file size. iTunes however still uses a Binary count. What that means is: your iTunes library shows one size, while the folder shows another. Depending on the size of your library, this can be a pretty big difference.
    Yours won't be that much, but it may be enough to prevent it from moving to the MBA from the TM.

  • Save as does not Create PDF Compatible File even when the creare pdf compatible files is on, Illustrator CC 2014

    save as does not Create PDF Compatible File even when the creare pdf compatible files is on, Illustrator CC 2014

    When I open is adobe acrobat I get this message.
    "This is an Adobe® Illustrator® File that was
    saved without PDF Content.
    To Place or open this  le in other
    applications, it should be re-saved from
    Adobe Illustrator with the "Create PDF
    Compatible File" option turned on. This
    option is in the Illustrator Native Format
    Options dialog box, which appears when
    saving an Adobe Illustrator  le using the
    Save As command."

  • I want to sync my Voice Memos but iTunes 10.5 will not let me even with the "include voice memos" checkbox selected.

    I want to sync my Voice Memos but iTunes 10.5 will not let me even with the "include voice memos" checkbox selected. As well Ive deselected all the music in itunes so when I sync there will be none on my phone but itunes also ignores this request and puts purchased music back on. I do not have autofill selected. Also wondering where the backup of my iphone 4s is located on my hard disk. Any help greatly appreciated.

    Sorry thats itunes 11.5

  • How do I stop all of my music in my itunes library syncing to my iphone 5 even when the songs aren't ticked?

    How do I stop all of my music in my itunes library syncing to my iphone 5 even when the songs aren't ticked?

    The frustrating part about the restore is that is seems to be finished when it in fact is not.  The restore will look "finish" and your phone will be at the Swipe to Unlock screen. If you swipe and look at your home screen at this point of the restore, you'll see everything is not quite right.  While the process seems to be not doing anything just leave the phone attached and do something else for about an hour.  This part of the process is not mentioned during the restore operation.  I believe there are about two steps to the restore process: 1) restore the phone settings (ringtones, background, notification settings, etc.) and give the user the unlock screen; 2) without letting the user know there is still more to do, begin the slow process of restoring all the music, movies, apps and what not.  It's this second step that causes the confusion.  Nothing lets you know to wait that process out.  I've restored a couple devices from a computer backup and the 2-step process looks the same.

  • Why can I not attach a document to an email? Every time I want to send an email with a document attached to it, an error notice pops out. It tell me that the file is being used even when  it is not. How can I fix this issue?

    Why can I not attach a document to an email? Every time I want to send an email with a document attached to it, an error notice pops out. It tells me that the file is being used even when  iall other programs are closed. How can I fix this issue?

    Thanks Jeff, I was not aware that a template could be multi-page.  (All the existing templates were 1 page)
    But it worked, saving me some steps.  When I was finished I renamed the document, and locked it.
    Then tried to save it but  could not because it was locked.  I closed it, went to my Spread Sheet Folder ,
    to find it, it was not there.  The Finder could not find it either.
    So I start over again.
    I opened up Numbers and it showed my personal Numbers template folder, it contained both my new 
    original 4 page template and the vanished saved document!
    I tried to delete the template containing these document data and could not - I had to go to the Library/Application Support/Numbers to physically remove it from this folder. Then I started over again.  I Finally found out how to make it work: I can now "save as", and then lock, and it will go to place where I want it to be saved and locked.
    The secret is: Click on the document title in the menu bar, and it opens up  "Save as...", which works the same as in OS 10.4.11, and you can pick the place you want for saving.  Once done that, you can then lock the document in the same pull down menu, and then close it.
    I also found later that I can delete a template from its folder, by letting Numbers open the templates,
    clicking on the one I want to remove, then go to the "Numbers Menu/File/Move to...", select "Desktop"
    and from there the selected template can then be thrown into the Trash from there.
    It appears now that the real fault of the Numbers software is that the "Save as" command is not available in the "Edit" or "File" pull-down menus, but hidden behind the title of the document.

Maybe you are looking for

  • How to Install SQL Enterprise Manager ?

    The standard installation file which sap gives sql4sap.vbs doesnt install the Enterprise manager. How to install SQL Enterprise Manager (ECC6+Win2003). regards, dev

  • WRT110 losing wireless connectivity periodically

    My new WRT110 loses all wireless (and wireless only) client connectivity just abougt everyday. It just drops out and is no longer an observable wireless network. A quick reboot of the router fixes it but that's a quick reboot I don't want to do. I us

  • [SOLVED] aterm and auto-scroll-down when typing

    I've been using aterm for a while now, and before that urxvt. What bothers me about aterm that I was very used to in urxvt was that, when you have scrolled up a bit, it doesn't jump to the bottom when you start typing. Is there any way for aterm to b

  • Dynamic update of EJB/Web deployment descriptors

    In 8.1SP3, is there any provision to allow for dynamic update of EJB/Web deployment descriptors? I'm specifically looking at env var changes. I noticed that there are some mentions of the ability to dynamically update deployment descriptors, but it a

  • Missing features in PSE9, screen reso problem?

    So we already know that the screen resolution is the reason why the Advanced Dialog box is missing.  But what else? I noticed that when creating a new album in Organiser (clicking the large green plus sign under albums on the bar to your right), you