ITunes WiFi Sync works fine for 4 devices, but not for my iPad2

I'm using the latest version of iTunes (11.0.4) on an iMac with the latest version of Mountain Lion (10.8.4) and multiple iOS devices listed below:
iPad 1 (iOS 5.1.1)
New iPad (iOS 6.1.3)
iPhone 4S (iOS 6.1.3)
iPhone 4S (iOS 6.1.3)
iPad 2 (iOS 6.1.3)
iTunes WiFi Sync works fine for all the devices but the iPad 2. They all show up in the "Devices" area of iTunes (though sometimes I need to power them down and restart them to get them to show up properly) and they all sync automatically when plugged into a power source.
The iPad 2, however, behaves thusly:
- Shows up under "Devices" in iTunes
- Can be synced wirelessly IF initiated from the computer
- Does NOT automatically sync when plugged in to a power source
- CanNOT be synced wirelessly from the iPad itself, as under settings > general > itunes wifi sync, it shows the screen that says "to enable wifi syncing with itunes, connect to ituens on your computer using a cable..." as if I have this feature turned off in iTunes (which I do not). The "Sync Now" button is not displayed (not even a grayed out version).
What I've tried:
- Repeatedly powering down and restarting iTunes, the computer, the iPad, and the router in various orders and combinations
- Repeatedly turning off and on the wifi sync feature via iTunes
- Experimenting with the "Open iTunes when this iPad is connected" option as this actually fixed a similar issue on my iPad 1
- Actually restoring the iPad to factory settings, then restoring from backup in case there was an issue with the iOS install
Nothing has helped
What I'm sure it's not:
- A problem with the usual iTunes settings (check "enable WiFi sync", uncheck "prevent iPads from syncing", etc.). Since all other devices work and I actually can perform a wireless sync when initiated from iTunes, I don't see how the issue could live here at all.
Any ideas? I'm pretty stumped!

Another oddity: When this iPad syncs, it does NOT create a backup as part of the process (whether wired or wireless). All my other devices do, as one would expect...

Similar Messages

Fixed headers while scrolling works fine in bids but not when deployed to reportserver

Hi, I am using SQL Server 2008 R2 & deploying a report to reportserver with fixed headers while scrolling, this works fine in bids but not when deployed to reportserver. We are IE 9.
Thanks in advance...............
Ione

Hi ione721,
Since you have identified the 2 xml files are identical, according to my knowledge, there maybe a compatibility issue with IE 9 and SSRS 2008 R2, so I suggest that you could run the report in compatibility mode. Please make sure you have turned on Compatibility
View in Internet Explorer 9 by following steps:
When Internet Explorer recognizes that a webpage is not compatible, you will see the Compatibility View button on the Address bar. Try clicking it.
When Compatibility View is turned on, the button changes from an outline to a solid color when you view the page.
The following screenshots are for your reference:
If you have any questions, please feel free to let me know.
Best Regards,
Wendy Fu

Table of Contents page numbers works for PDF but not for other formats

Hi,
I followed exactly was indicated here regarding creation of TOC.
http://docs.oracle.com/cd/E10415_01/doc/bi.1013/e12187/T421739T481157.htm
The page numbers generated correctly for PDF but not for RTF, HTML and XLS.
(HTML and XLS are understandably not paginated in nature but why not in RTF?)
Tried to make the simplest example work, with 2 headings each on a separate page. Doesn't work on either MSWord 2003 or 2007.
What am I doing wrong?
Regards,
Jarell
Edited by: Jarell on Jan 11, 2012 8:08 PM

Hi Kavipriya,
What is your email address? I have attached a file in Oracle Metalink, under SR 3-5172030861. named test_toc.rtf
You may use any xml because the template does not use any dynamic binding of values.
The template is basically 2 pages, the TOC in the 1st page. First TOC item (Heading 1) is in Page 1, and Second TOC item is in Page 2.
So the end result should be (PDF result from BI Publisher):
First TOC Item .................. 1
Second TOC Item ............. 2
But for RTF it outputs:
First TOC Item .................. 0
Second TOC Item ............. 0
And after doing Print Preview (once or twice)
First TOC Item .................. Error in Bookmark
Second TOC Item ............. Error in Bookmark
Hope this is detailed enough to illustrate the problem.
Edited by: Jarell on Jan 17, 2012 10:24 PM

Password works for login but not for the Adobe CC Desktop application

Password works for login but not for the Adobe CC Desktop application

Please refer to http://helpx.adobe.com/creative-cloud/kb/troubleshoot-cc-installation-download.html
ou can try deleting OPM.DB from steps below and try again.
Mac OS: You can locate the OPM.db file in the \User\\Library\Application Support\Adobe\OOBE folder. To access the hidden user Library folder, see Access hidden user library files | Mac OS 10.7 Lion. - http://helpx.adobe.com/x-productkb/global/access-hidden-user-library-f iles.html
Windows: You can locate the OPM.db file in the :\Users\\AppData\Local\Adobe\OOBE folder. To view the hidden AppData folder, see Show hidden files, folders, filename extensions | Windows XP, Vista, Windows 7. -http://helpx.adobe.com/x-productkb/global/show-hidden-files-folders-ex tensions.html
3) update to the latest version of the Creative Cloud app.
Also we would like few more details:
When has this issue started occurring, was this after installation of any specific adobe product.
On which platform are you seeing this.
Also we would like to know if after above steps this issue occurs ever again in future.
You can refer to http://forums.adobe.com/thread/1239510
Regards,
Rajshree

TS3274 Getting sound for music, but not for game apps. Checked settings and sound is on. Any suggestions.

My volume controls work and getting sound for music but not for game apps. I did check settings and sound is turned on under notifications and in the app. Any help would be appreciated

Have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad above the volume switch, or via control centre : swipe up from the bottom edge of the screen and it's the right-most of the 5 icons in the middle of it (if the icon is white then it's 'on', tap it to turn it grey and 'off'). The function that isn't controlled via the side switch is controlled via control centre instead : http://support.apple.com/kb/HT4085

How can I view the number of tunes in the Library? The number shows for Playlists but not for the total Library.

How can I view the number of tunes in the Library? The number shows for Playlists but not for the total Library.

Hello,
I apologize for submitting this question. Soon after I posted it I saw a similar question that had my answer..
Again, my bad for not looking first.
Ron Morris

ITunes/Apple Mobile Device works fine w/iPod but not iPad

Hi. I'm getting stuck on this and would like some help to solving this problem. Basically I'm trying to sync my iPad; however, whenever I connect it, this meesage pops up: "this iPad cannot be used because the Apple Mobile Device is not started." The problem is that when I try to plug in an iPod using the same wire, it works fine, no problem, but the iPad just won't connect. I have since uninstall and reinstall all Apple components (iTunes, AMD, QuickTime, etc) and it's still the same thing...iTunes connects fine w/ the iPod, but not the iPad. What to do? Thnx in advance.
EDIT:
Btw, I've tried to connect the iPad while the iPod is connected, and the "Apple Mobile Device is not started" error message pops up too, which is weird, because the iPod is connected and syncing at that time...which means the Apple Mobile Device thing IS started. >.>

The iOS devices use Apple Mobile Device Service, while older iPods use the iPod Service.
Checkout this Apple document -> How to restart the Apple Mobile Device Service (AMDS) on Windows
Are you able to restart the service after following the steps in that article?

Apple TV working fine with Wireless, but not on Ethernet

I just got an Apple tv for my B-day and I can't get the Ethernet port to work.
It works fine on wireless but if i plug in the cable to my 5 port switch that then goes to my router it will not login to the store, or sync or fine youtube. It has and ip and everything. I tried opening that port 38 something. And no go? Does anyone have any ideas?
I have a 2wire router, and one 5 port switch, the PS3, Wii and Xbox all work on the switch just fine.
I even upgrade to firmware 2.01

Thanks for your help guys
I have tried another ethernet cable but no go. I'm going to get a new one at the store today. As for the IP. the first time I plugged it in the IP was way diffrent from the one on my router so i manually added the new ip and subnet mask etc etc. And still no go. It is seen in itunes but tells me it can't sync. And if i go to the Apple TV it will not open any of the web enabled features. No you tube, no store, no nadda.

Query working fine in toad but not in forms 6i

i have following coding on when button press triger
declare
CURSOR C1(year number,month number) IS
SELECT ITM_NO,ITM_NAME,XAQ QTY,XAQ*TP VAL,gp
FROM
select ci.itm_no ITM_NO,ci.itm_name ITM_NAME ,cpg.group_id gp ,xaq ,ALLIED.CORP_PRIC_TP( ci.itm_no)TP from
select prod_no,sum(xaq)*1 xaq
from
select prod_no, sum(nvl(xrd_sqty,0)) Xaq
from allied.mrk_01_02
where year=year and f_prd=month
and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
group by prod_no
union all
select prod_no, sum(nvl(xrd_sqty,0)) Xaq
from allied.mrk_02_02
where year=year and f_prd=month
and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
group by prod_no
union all
select prod_no, sum(nvl(xrd_sqty,0)) Xaq
from allied.mrk_03_02
where year=year and f_prd=month
and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
group by prod_no
union all
select prod_no, sum(nvl(xrd_sqty,0)) Xaq
from allied.mrk_04_02
where year=year and f_prd=month
and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
group by prod_no
group by prod_no
) A,allied.corp_inv ci,allied.corp_01_01 c01, allied.corp_01_02 c02,allied.corp_prod_group cpg,allied.v_prod_grp vpg
where ci.itm_no=a.prod_no
and ci.itm_no=c02.itm_no
and c01.grp_id=c02.grp_id
and c01.grp_id in(55,56,57,58,59)
and vpg.prod_no =ci.itm_no
and vpg.group_id=cpg.group_id
where XAQ <>0;
Begin
     delete from fiaz.tmp_topten_prod;
     for i in c1(:year,:month)
loop
          insert into fiaz.tmp_topten_prod
          values(i.itm_no,i.itm_name,i.qty,i.val,i.gp,0);
     end loop;
standard.commit;
message('inserted in temp');
     exception when others then
          message (dbms_error_text);
          message (dbms_error_text);
End;
Same Query (as used in cursor c1) works fine in toad but giving wrong result from forms... and the problem is xaq field i.e returns incorrect qty...
i guess union clause is not working in this situation...
plz suggest me the appropriate changes in the query to work well from form as well...
combination:Forms 6i,Oracle 8.0.6
Regards,
Usman Afzal

As per your suggestion i have created a stored procedure but the followin error prevents procedure creation
create or replace procedure fiaz.topten_prod(v_yr number,v_mn number) is
begin
delete from fiaz.tmp_topten_prod;
insert into fiaz.tmp_topten_prod(itm_no,itm_name,qty,val,grp_id,prority)
SELECT ITM_NO,ITM_NAME,XAQ QTY,XAQ*TP VAL,gp,0
FROM
select ci.itm_no ITM_NO,ci.itm_name ITM_NAME ,cpg.group_id gp ,xaq ,ALLIED.CORP_PRIC_TP( ci.itm_no)TP from
select prod_no,sum(xaq) xaq
from
select prod_no, sum(nvl(xrd_sqty,0)) Xaq from allied.mrk_01_02
where year=v_yr and f_prd=v_mn
and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
group by prod_no
union all
select prod_no, sum(nvl(xrd_sqty,0)) Xaq
from allied.mrk_02_02
where year=v_yr and f_prd=v_mn
and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
group by prod_no
union all
select prod_no, sum(nvl(xrd_sqty,0)) Xaq
from allied.mrk_03_02
where year=v_yr and f_prd=v_mn
and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
group by prod_no
union all
select prod_no, sum(nvl(xrd_sqty,0)) Xaq
from allied.mrk_04_02
where year=v_yr and f_prd=v_mn
and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
group by prod_no
group by prod_no
) A,allied.corp_inv ci,allied.corp_01_01 c01, allied.corp_01_02 c02,allied.corp_prod_group cpg,allied.v_prod_grp vpg
where ci.itm_no=a.prod_no
and ci.itm_no=c02.itm_no
and c01.grp_id=c02.grp_id
and c01.grp_id in(55,56,57,58,59)
and vpg.prod_no =ci.itm_no
and vpg.group_id=cpg.group_id
where XAQ <>0;
commit;
end;
Error:
"PLS-00201: identifier ALLIED.MRK_01_02 must be declared "
i have not changed any thing in query working fine in toad without create procedure text and if i describe this table it shows the structure (desc allied.mrk_01_02)
Now where is the problemmmmm
Plz Help

Can't FLIP a quick RENDER! Works fine in SHAKE but not to flip or Disk!

Learning with Lynda.com!
Part 1 has you rendering two files, one is a still image, the other a quicktime movie, I don't have the money for premium so I got my own clouds movie (.mov) and added a still plane.
I key framed 1 - 100 and playing it back its fine in shake, but not on FLIP or DISK, its nothing but a still image. Have done it 5 times making sure that all the right buttons are on, or not, and as I said, it works INSIDE of shake but won't RENDER to FLIPBOOK!
I don't suppose anyone wants to send me the exercise files? (on knees begging LOL) I am a member, just can't afford $300 for one pop and this is really the only program I need to learn.
Thanks!

Sorry if I'm pointing out something obvious that you already know. Have you checked the time range in the render dialog? Shake does not fill in the values for you automatically, and defaults to "1" so only renders the 1st frame. It needs to be set to eg "1-100".

ISync works for iCal but not for Address Book

Another lost soul. Can anybody suggest where I should start looking for the problem.
I've just successfully modified my iSync so that it sees my brand new Nokia 6300. I have got the phone and my iMac to sync my calendar, but absolutely zero activity on the contacts front.
Looking at the message on my Nokia, the Synchronisation Info message records changes to the Calendar but makes no mention of the Contacts. It is as if I've switched off the requirement to sync these somewhere.
Any ideas for where to look?
Frances

I followed the instructions on http://kaspers.freeflux.net/blog/archive/2007/04/13/how-to-isync-a-nokia-6300.ht ml , including simply replacing my MetaClasses.plist with his. The site blog shows this worked for lots of people, but not for me
Over the years I have found these Apple Discussion lists a very useful source of help, but I don't think I have ever come across a list with so many frantic pleas for help as this! ISync is a wonderful Idea, but it seems that it is far from plain sailing to implement.

Linked server works for sa but not for user

I have a linked server to an Oracle database. It works fine for me logged in as DBA but not for the user. The linked server uses the same account regardless of who's using it.
When the user tries it the following error is thrown:
Cannot initialize the data source object of OLE DB provider "OraOLEDB.Oracle" for linked server
I have granted public access to MSDB and execute on the xp_prop_oledb_provider object to the user.

this link should give all the connection string to sql server
http://www.connectionstrings.com/sql-server/
but can you verify if your application is really using that connection file ? try running trace alongside and try to connect to the database.. so do you atleast see a call from this config file with username - myapplication??
Hope it Helps!!

Router works for desktop, but not for surrounding laptops.

The router I have is the Linksys E1000. I bought it and hooked it up yesterday and works great for my desktop but not for my daughters laptop. Her laptop has wireless automatic internet recognitions which allows her to pick up surrounding internet networks. We cannot figure out how to make this work. Please help!

Are you able to see your router's network name on your laptop? If yes, then follow the below mentioned settings.
Click Start >> Control Panel >> Network and Sharing Center >> Manage Wireless Networks, here remove all the networks present and close the Window...
Click on Connect to a Network and try to re-connect to your Network, it should ask for your Network Key/Password, enter the correct password/network key and click Connect...
It should connect...Once you are connected you should restart the computer, it should connect to Internet...

Disable Control Panel for users but NOT for administrators

I'm unsure why Microsoft has not yet published this information. I'm sure that sysadmins everywhere want more granular control of the control panel besides disabling for everyone or enabling for everyone, which is what it seems Microsoft wants me and
you to do, disable CP for everyone, enable it every time I log on as admin and need to use it, then disable again. Ridiculous.
I am a consultant for a large company and our partners like to take as much control as possible. I do too, for that matter. Last week I began researching how to disable the control panel for everyone except admins. I am operating under
the assumption that non-admin accounts do not need access to control panel and it's better if they don't, especially in a production environment where the terminals the users are operating are mission critical.
Finally, I found the answer. I hope this helps you because it took me 3 days to finally find it. It works. I've tested it with admin and non-admin. The great thing is, you can control any GP setting for non-admin users in this manner,
not just the Control Panel. You could disable any and all functionality not necessary for day to day operations for all your users but still maintain access to everything by logging on as an administrator.
The question is answered here
http://www.sevenforums.com/tutorials/101869-local-group-policies-apply-all-users-except-administrators.html

Don:
Sorry for the confusion. Not sure why my link is bad and yours is good. They both appear to be identical.
The issue with executing gpedit.msc is that when you apply a setting, the setting is for all users, even administrators. If I want to disable access to the control panel, I do so for admins as well when simply executing gpedit.msc, which means if I
log in and need access to control panel, I have to enable it in GP, do the work necessary and then disable it again (if I remember) when work is complete. A bit of a drag, especially for busy admins and support techs. On the other hand, following
the instructions in the link disables control panel for all users except administrators. So if I need to work with Control Panel as an admin, I've saved the enable, disable steps and don't have to worry about remembering as well.
I hope that clarifies. Thanks for your feedback.
ok, thanks. I re-read the guide one more time and now I understand the logic - it creates a LocalGPO object, when gpedit.msc is launched in this very special way. It's kind of cool, even if rather niche. (I'm assuming that it only works for LocalGP and not
for Domain GP).
I think your original link had a trailing dot, but it's fine now.
Thanks for clarifying - even after all these years, I am still learning new things :)
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Block G/L Account for posting but not for parking

Hi all,
is there a possibility to customize a G/L account in a way that it is blocked for posting but not blocked for parking?
Kind regards,
Georg

Hi Georg-Stefan,
Directly, you cannot define such a thing. G/L blocking works on every posting level.
You can try, though, to pull a trick with a validation (OB28) checking on the BKPF-BSTAT field if it's not V - then block the posting. The prerequisites will be the G/L accounts, which can be organized in sets for better maintenance.
Regards,
Eli

ITunes WiFi Sync works fine for 4 devices, but not for my iPad2

Similar Messages

Maybe you are looking for