ITunes won't detect firmware 4.3.3 for iPhone 3GS

I've read about the problem where it doesn't download it and you have to turn off the firewall etc.  However my problem is that it just won't detect it at all.  I check for updates and it says that my iphone is update to date which is running on a 4.2.1.  I even tried to manualy do by downloading the firmware and going into recovery mode on the phone and shift clicking restore but then it says that the firmware is not compatible with my phone.
The phone is an iPhone 3GS not jailbroken running on 4.2.1.
Running Windows 7 64bit.
I have the most recent version of iTunes.
I did the whole virus protection being off, firewall off and changing the host file thing.
Nothing seems to work and I'm not sure what else to do here.  I thought perhaps the 4.3.3 firmware wasn't for the 3GS but reading about it seems it is so I'm not sure why iTunes won't detect it.

Try getting it from here
http://osxdaily.com/2011/05/04/ios-4-3-3-download/
Download the version for your phone, then connect the phone to iTunes and hold SHIFT while clicking Check for Updates. You can then install the file you downloaded above.

Similar Messages

  • Itunes won't detect ipod...

    Hey all. I previously installed my ipod on my computer with all the software and it was working fine. It was working perfectly. I decided to return it to get a smaller version, but before I did that, I had to restore the factory settings. I later decided to keep the current ipod, but now itunes won't detect the ipod. I tried reinstalling the software numerous times and it didn't work. I also plugged it into a different usb port like the manual suggests but it still doesn't work. Can anyone please help? thanks.

    i love you whoever posted the thread in this link!!!!!!http://discussions.apple.com/thread.jspa?threadID=299830&tstart=90

  • ITunes won't detect my iPhone 4

    I currently use a MacBook Pro with the 12.0.1 version of iTunes, however I also have an iPhone 4 and recently got an iPhone 5. In order to backup my iPhone 4 and put it onto the 5 i need to be able to sync, but iTunes won't detect my device (iPhone 4). I have completely uninstall iTunes so that I can install an older version that is compatible with my iPhone 4.
    So my question is, what is the latest version of iTunes available that is compatible with the iPhone 4 software of 7.1?
    All help is appreciated, thanks.

    For anyone else having this issue on OS X this post will fix it.
    Steps 7, 8 and 9 may not be required in Snow Leopard.
    http://discussions.apple.com/thread.jspa?threadID=2465013&tstart=0
    Reinstall the Apple Mobile Device Service:
    1. Disconnect your iPhone, iPad, or iPod from the Mac.
    2. In the Finder, locate iTunes in the Applications folder and drag it to the Trash.
    3. Move the iTunes icon to the Trash.
    4. Choose Go > Go to Folder.
    5. Enter /System/Library/Extensions and click Go.
    6. Locate the file AppleMobileDevice.kext and drag it to the Trash.
    7. Choose Go > Go to Folder.
    8. Enter /Library/Receipts/ and click Go.
    9. Locate the file AppleMobileDeviceSupport.pkg and drag it to the Trash. If prompted, authenticate with the administrator password.
    10. Restart the computer.
    11. Choose Finder > Empty Trash and restart the computer.
    12. Download and install the current version of iTunes.
    13. Connect your device to the Mac again and open iTunes & see if you can sync now.
    Message was edited by: kazop

  • ITunes Won't Detect My iTouch

    Hey guys, I know there have been a few questions about this. Basicly, I upgraded my iTouch to v2.0 on my laptop that's running Vista. When I took it over to my desktop since I usually use that computer, iTunes won't detect my iTouch. Is there any way do fix this BESIDES having to put my iTouch in DFU mode? I've already got a bunch of apps that I really like and I don't want to have to reget them all.
    Thanks

    Ok, so I've tried to put my iTouch in DFU mode since all else has failed and well, that fails too. I hold the sleep and home buttons then let go of my sleep button, but when I finish it all, iTunes doesn't recognize my iTouch as an iPod in DFU mode. Then, when I try to turn my iTouch on or make something happen with it, nothing happens. I tried to redo the DFU steps and after reputting it in to DFU mode it turns on and my iTouch is like it was before anything happened. Can anyone help? I can't get my songs and videos and pictures and all that stuff on my iTouch cause they're all on my desktop and my desktop won't recognize my iTouch.
    Thanks

  • ITunes won't detect iPhone4

    My iPhone wouldn't open my messages and each time I tried - it would crash.
    So I backed up and reset my settings, updated iTunes and ever since my iTunes won't detect my iPhone.
    I have tried all the troubleshooting options, uninstalled & reinstalled iTunes twice, and it's still not showing when I plug in my phone.
    MY phone keeps restarting, won't allow me to text, won't allow me to turn on my iMessages.
    Someone please help before I throw my phone against a wall.

    This may help:
    iOS: Device not recognized in iTunes for Windows
    iOS: Device not recognized in iTunes for OS X

  • Itunes won't detect all my music

    Itunes won't detect all of the music on my PC there for I can't transfer all of it to my Ipad.  Thoughts?

    Think I found the problem.  It appears that if you have music that is incompatible with the ipad and you don't have the automatic converter to AAC turned on itunes just stops there and won't load the rest of the music.

  • I have a new Ipad 2.  iTunes won't detect it.

    I have a new iPad 2, i need connect my iPad with iTunes to use. But iTunes won't detect it. I used lastest version iTunes and win7. When i connect iPhone 4 with my laptop, it's good. But it can't recognize iPad2. What's the probleme here?

    I have a similar problem, but it began when i installed iTunes 10.5.2.11 on my windows 7 computer and tried to install the latest update to ipad2 software.  Prior to installing the new itunes, i had been able to sync with itunes easily and as expected.
    After installing the new version of iTunes - the ipad2 began to act strangely:
    it did not charge correctly even when connected to OEM power adapter ("not charging" message appeared when plugged in)... this still appears to be an issue, though it does not happen all the time.
    the computer no longer recognizes the ipad device (i have tried different cables and it does recognize my ipod nano)
    i am afraid to reset the ipad for fear that i will still not be able to connect afterwards and i will have lost all the apps currently installed.
    Any hints on how to go about fixing this issue?

  • My iTunes won't detect my iPhone that has to be restored via iTunes *because if pass code problems* and its running iOS 7.2

    my iTunes won't detect my iPhone that has to be restored via iTunes *because if pass code problems* and its running iOS 7.0.4

    If itunes is comming up and saying it can't read the device because it's locked with a passcode, you may have to put your device into recovery mode first.
    To put your device in recovery mode: (Following these steps will erase your device and reset everything to factory defaults)
    1) press and hold the power button until you see the slide to power off option
    2) swipe to power off
    3) Press and hold the home button while the device is off and connect it to your computer. Continue holding the home button until you see a graphic with the iTunes logo with a picture of a USB cable below it.
    4) iTunes should give you a message that it has detected a device in recovery mode. Click ok and then select Restore iPhone. iTunes will download a fresh copy of iOS and then wipe the device and restore it. Depending on the speed of your computer's internet connection this may take a while. Just leave the iphone connected to your computer until it's finished.
    If itunes is not detecting it at all or is Not giving you the message that the phone is locked with a passcode, you may end up having to reinstall itunes. This seems to be a fairly common problem after the most recent itunes update (11.1.5)
    If this is the case and you happen to be running a windows based computer you will have to uninstall itunes in this order from your programs and features option in control panel:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Then download and reinstall itunes from itunes.com try putting your device into recovery mode again and restore.
    Hope this helps.
    Cheers.

  • IPod Touch 2g heats up iTunes won't detect it?

    Hello there I have a iPod touch 2g it heats up when I try to charge it. Its not in warranty anymore sadly. I tried to do the DFU mode and iTunes won't detect it.
    I have iTunes 10 and am running windows 7.
    Please help

    I would make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    I suspect a hardware problem. Maybe a bad battery.

  • My iTunes won't sync my tones (ringtones) to my iPhone 4.  Every time I check "sync tones" my iTunes library says that my iPhone is connected to another iTunes library, but I don't have another iTunes library.  What do I do?

    My itunes won't sync my tones (ringtones) to my iphone 4.  every time i check sync tones my itunes library says that my iphone is connected to a different itunes library but i do not have another itunes library.  what do i do?

    Hi HB3207!
    I have a couple of suggestions for you to attempt to resolve this issue. First, I would try re-creating your iTunes library following the instructions listed here:
    iTunes: How to re-create your iTunes library and playlists
    http://support.apple.com/kb/ht1451
    You may also need to simply try restarting your phone and attempting to sync again after a restart. Information on completing this can be found here:
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • ITunes won't recognize my password to restore my iPhone backup file after upgrading to ios5

    iTunes won't recognize my password to restore my iPhone backup file after upgrading to ios5.
    Tried every password I've ever used and tried resetting my password.  Nothing works!
    Any advice?

    Nope.  You obviously didn't read (or didn't remember) the User Guide.  I will include a link for you.  If you use the iPhone as Apple recommends (so that you do NOT experience data loss), frequent backups are advised, as are synching contacts/calendars with an appropriate cloud service or computer-based contact manager like Outlook.
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • How can I transfer music files from my iTunes to iphone? I am using the latest Lion software and iOS5 for iphone 3Gs

    how can I transfer music files from my iTunes account in my Mac to the iphone? I am using the Lion software & iOS5 for iphone 3GS.

    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • HT3939 what is the original firmware for iphone 3gs model number a1303?

    what is the original firmware for iphone 3gs model number a1303?

    What does it matter?
    What is the issue you are trying to resolve?
    The current version of iOS for the 3GS is 6.1.2.

  • Computer unable to install device driver software for iPhone 3GS, where do I locate the software? As my phone is in restore mode following update through iTunes...

    My computer is unable to install device driver software for iPhone 3GS, where do I locate the software? As my phone is in restore mode following update through iTunes...

    It's included in the iTunes installation bundle. Re-download and re-install iTunes on your PC.

  • Iphone stuck on "Connect to iTunes screen", iTunes won't detect it

    I have an iPhone 5. I tried to install the IOS 8 update via iTunes today, but after about 15-20 minutes, my phone went to the "connect to iTunes" screen and would not complete the update. I don't recall if an error number popped up, but at any rate I can't find out what it was or even if there was one now.
    Since attempting to update the iPhone, I cannot get past the "connect to iTunes" screen. My computer detects that there is an apple device, but that's about it. When I plug my iPhone into the computer, iTunes runs in the background but does not pop up like it usually does. Additionally, now if I bring up the task manager and end iTunes, then iTunes still will not pop up if I attempt to run it again with the iPhone still plugged in. iTunes will only pop up if I unplug the iPhone and then run iTunes. iTunes used to pop up automatically once the iPhone was plugged in. As for trying to unbrick my iPhone:
    I have tried turning the iPhone off and on again. It goes to a black screen when off, as usual. It goes to the Apple logo, and then right back to the "connect to iTunes" screen once turned on.
    I have tried uninstalling and reinstalling iTunes after unplugging the iPhone, and then plugging the iPhone back in once iTunes was reinstalled.
    I have verified that Apple Mobile Device Support is installed
    I have verified that the Apple Mobile USB Driver is installed
    I have tried switching USB ports on my computer
    I have tried putting my phone into recovery mode by unplugging it, holding the home and power buttons and then plugging it into the computer while still holding the home button, but there is no effect.
    I have tried updating the phone by going to device manager, then to the update driver screen for the Apple device, and then manually selecting the update from Common Files>Apple>Mobile Device Support>Drivers, but there is no effect.
    I have tried removing the SIM card, but even without the SIM card it still goes to the connect to iTunes screen once turned on again.
    I have tried putting back in the SIM card, but no effect.
    My iPhone has previously had trouble with the last update too, but I was able to get it working again somehow. I've since forgotten how, but I'm pretty sure it wasn't this difficult. I do not know if the last update was ever installed at all after I fixed the iPhone, so I do not know my iPhone's current iOS version. I think it is iOS 7.1.2, but I do not know how to check.
    I would really appreciate any suggestions. Thanks!

    Nevermind, I was able to fix it. I had to put my iPhone into recovery mode, and then plug it into someone else's computer with iTunes. That got it back to normal. Does anyone have any suggestions as to why this is? I'm hoping I won't have to keep repeating this process every update...

Maybe you are looking for

  • Need help with Drill down Matrix Report

    Hi, I need to create a matrix report with a tree functionality with two line heading. Can some body tell me how can I generate this report? REGION1 REGION2 REGION3 COL1 COL2 TOTAL COL1 COL2 TOTAL COL1 COL2 TOTAL ======================================

  • Multi Mapping for JDBC Receiver JDBC Adapter

    Hi All,     I'm trying an IDoc to JDBC (canonical XML) scenario using multi mapping (single IDoc as source and two different JDBC messages in receiver end). But, this is failing in RWB with some parser error. So, am not sure whether multi mapping is

  • SAP ERP  logical Component MISSING !!!!

    Hi, I'm trying to configure a SAP ERP 2005 in SSM but when I try to assign the system to the logical component SAP ERP 2005 it doesn't appear in the list; I only have SAP ECC Server and Application server ABAP. Like this I can't assing my SAP ERP 200

  • Okay... Now I know what I should ask.

    Hello, it's me again, please read the bottom. public class Item implements Comparable private int myId; private int myInv; public Item(int id, int inv) myId = id; myInv = inv; public int getId(){ ) public int getInv(){ } public int compareTo(Object o

  • 12v adapter for HP Envy X2

    Hi all, recently acquired an HP Envy x2 with 64gb for using as navigation PC in my boat. Excellent piece of hardware and I look forward to using it. However, I have searched the net and havent found anything whether HP has or will have a 12v adapter