Ive just opened up my brand new 5th gen, 32g, blue Ipod Touch. I turned on the power and started to use it until the battery went off. The problem is that its not charging. Im really starting to get frustrated please help!
ive just opened up my brand new 5th gen, 32g, blue Ipod Touch. I turned on the power and started to use it until the battery went off. The problem is that its not charging and i wouldnt know if it was charging or not because the screen
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
ANd
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Similar Messages
-
I have redeemed my code to download the Mountain Lion. I left it for download overnight. Now I am unable to find the download and its not installed. And the code says that its already redeemed so I cannot download the Mountain Lion again. Please help.
Look in your Applications folder.
-
i bought a brand new 5th gen ipod touch. im trying to restore from itunes backup. then it says connect to itunes but my hp laptop is not syncing it. when i plug it in it does nothing but say connect to itunes... how do i fix this?
Hey jtom234412,
Thanks for the question. Based on the information you have provided, it sounds like your device is not detected in iTunes for Windows. The following resource may help resolve this issue:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Furthermore, if your device is in recovery mode (displaying an iTunes symbol, with a plug), see the relevant information under Step 5.
Thanks,
Matt M. -
Brand New 5th Gen iPod Touch Won't Connect to Wifi
I just got a brand new 5th gen iPod Touch and expected to have a fun night of playing with it, but instead I was trying to figure out why it won't connect to my network. Not a good introduction to a product.
Here is the related info and troubleshooting steps I've already tried:
- It will not connect to my wifi network
- The iPod Touch says "Unable to join the network [network name]" when I try to connect to my network (as opposed to "Could not find the network [network name]" when it is not the correct network name)
- I was able to connect to a random unsecure network nearby
- Of course I power cycled my router and modem to reset them
- My wireless router does not broadcast its SSID; I made it broadcast it and it still didn't connect
- My network is password protected. I tried changing the security type, as well as turning the password off altogether, but nothing worked
- My wireless router is a Netgear WGT624 v3
- Even though it's brand new, I tried resetting the iPod Touch and the network settings
Does anyone have any tips or solutions for this?
I wasn't able to find other people with this problem, at least not with solutions that I haven't tried. It's really frustrating not being able to connect to the internet with my new device.
I will point out that my Android phone connected to my wifi network on the first try with no problems.
ThanksTry:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
iOS: How to back up your data and set up as a new device
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
What security are yo using with the router?
Try as a test setting the router security to None. -
Hello!
I just figured this out.....When Firefox is open, my Illustrator CS2 modifier keys stop working?
As soon as I shut down Firefox, they start working again. Please help!
Thanks!
== This happened ==
Every time Firefox opened
== Not sure.Try to create a new profile as a test to check if your current profile is causing the problem.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over problems.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
bought games and music on my ipod touch and then bought a new mac, but i updated my ipod on the new mac and lost all of my games and music and they arent on my computer or my ipod touch:( The apps i bought are not on my old computer either!! please help!!! I don't want to buy them all again!!
- You can redownload yur apps at no additional cost. See:
How to redownload purchased apps from the App Store
- You only get one download of music and it is up to you to make a backup. However, sometimes if you explain what happens the iTunes store may allow a redownload of music. You can contact them by starting here and selecting the appropriate topic:
Apple - Support - iTunes -
i can not get ipod touch to turn on. it shows picture to connect to itunes but it says to enter pass code but will not gogto screen to enter code. HELP PLEASE
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps... -
hi, i bought an iphone 5 through ebay, when i am trying to activate, its asking for a icloud user name and password, but i am unable to contact the owner, but its not black listed. is there any solution? please help me.
Hello there, Ark.
It sounds like the iPhone has Activation Lock still activated. The following Knowledge Base article provides the methods available for removing the previous owner's account:
Find My iPhone Activation Lock: Removing a device from a previous owner’s account
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
My ipod touch is connected to the computer but itunes is not recognizing it. help please !
My ipod touch is connected to the computer but itunes is not recognizing it. I need help please. I've tried restarting both my ipod & the computer and also unistalling itunes and loading it again, nothing is working.
Assuming you have a PC, start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows -
i upgrade the version of ios 5.0.1 in iphone 4 now the problem is that could not activated the ipohne 4
See Here for
Unable to Update or Restore
http://support.apple.com/kb/HT1808 -
I had an old ipod which I had downloaded songs from my pc..I bought a new Ipod touch and want to download songs onto my new ipod touch when I attach the ipod to my pc it reads "camera detected" I have a mac air as well but all my songs are on the pc. I want to download songs onto my ipod touch from the pc can any one help me?
LesThis may help you find your iTune account:
Frequently Asked Questions About Apple ID
Without knowing your old account info there is nothing you can do. -
I have installed Windows 7 using Boot Camp on Macbook Pro OSX 10.9.3, I'm not able to connect to wireless and its not showing as well in network sharing. Please help
Hello Bhagyeshree
Check out the articles below to troubleshoot issues with connecting to Wi-Fi. Start with creating a new Network Location and then search for a Wi-Fi network and if that does not work, then go through second article to troubleshoot the issue further.
OS X Mavericks: Add a network location
http://support.apple.com/kb/PH13788
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Regards,
-Norm G. -
hey there, so im making a video for a family event..
i drag in an audio clip all of a sudden this becomes the be all and end all, and i want to sync some vid clips to that audio track, so let's say i drag in a 10 second video clip, at the end of the 10 seconds, i want to add a transition to fade to black.. i go to the transition window.. choose the cross dissolve or fade to colour, but it will not allow me to drag it on that video clip.. it always ends up on the audio track. this bloody application is so confusing compared to final cut. please help!Ahhh, now I see the problem, Grasshopper. Problem is, we are all Grasshoppers, here.
Yes, that little piece of info is critical. I'd say the biggest difficulty with FCPX is the whole new language.
If I read you correctly, your Audio is in the Main Storyline (Track 1 in plain old Editorese). This makes anything else you add (above or below) a "connected clip", which we can no longer think of as "Track 2" because Jobs sez so. So, yes, you cannot just add a transition to either end of a connected clip.
No argument with Tracy's solution, because I haven't seen any other general solution presented for any attempt to treat connected clips as the main storyline. And, of course, when they were "track 1" and "track 2", you could.
An alternative solution, however, is to highlight the connected clip and press Ctrl-V to bring up the Video Animation Editor. Click the "reveal button" for Compositing: Opacity (bottom, right). Once open, there is a "fade handle" to the right top. Drag it left for however much fade you wish. (there is one on the left as well, but you were only talking about a fade-out.)
A second alternative, perhaps for future projects where everything keys on audio, may be to create a Gap clip (used to be called slug) in the primary storyline before ever dropping in the audio. Then you can add video to the main story line and modify it without having to go thru hoops to do the simplest thing. -
The Icloud on the newer i pod will not activate and itunes will not let me download my icloud songs on itunes that i bought on my other ipod how do I update the new ipod and add icloud so i can put my music on it???
What happens when you try to update/restore Erro message?
Is is a 2G iPod? They look the same.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318. -
My iPad mini doesn't seem to connect on the pc. Every time I try to connect it my iPad always say that it's not charging.. What should I do to be able to connect it. Please help as I'm a new user.thnx
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
What to Do If Your iPad Won't Charge
http://ipad.about.com/od/iPad_Troubleshooting/a/What-To-Do-If-Your-Ipad-Will-Not -Charge.htm
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Since you are a new iPad user, here's some helpful info to get you started.
Complete guide to using iOS 6
http://howto.cnet.com/ios-6-complete-guide/
Guide to Built-In Apps on iOS
https://sites.google.com/site/appleclubfhs/support/advice-and-articles/guide-to- built-in-apps-ios
You can download a complete iOS 5 iPad User Guide and iOS 6 iPad User Guide here: http://support.apple.com/manuals/ipad/
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Apple iPad Guided Tours - Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
http://www.youtube.com/watch?v=YT2bD0-OqBM
http://www.youtube.com/watch?v=ROY4tLyNlsg&feature=relmfu
http://www.youtube.com/watch?v=QSPXXhmwYf4&feature=relmfu
How to - Articles & User Guides & Tutorials
http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
You can download this guide to your iPad.
iPad User Guide for iOS 5
http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
Cheers, Tom
Maybe you are looking for
-
Lion is a step backwards that appears to indicate a philosophical switch towards dumbing down. I realize there's lots of Mac newbies coming from iPads, iPhones, and iPods. I have no problem simplifying things for the masses, but why make the Mac OS l
-
How to change timestamp format in file receiver
Hi all, I have a FILE to FILE scenario WITHOUT repository objects. What I need to do is to add a time stamp at the end of the target file. By default, the "Add timestamp" option in the file receiver communication channel makes the filename as *YYYYMM
-
Guidelines for setting Application Module Pool Size Parameters?
Are there guidelines for setting the application module pool size parameters, such as initial pool size, maximum pool size, etc., based on the expected number of users or other factors? I've read the developer guide sections (ch 28-29), but still don
-
The DataSource with the JNDI name: MyDataSource could not be located.
hi, I created a connection pool myconnectionpool and i create a data source MyDataSource with jndi name as mydsn. in my weblogic-cmp-rdbms-jar.xml i gave <data-source-name>MyDataSource</data-source-name> and When i deploy the bean i am getting follow
-
Hi, Brand new to CF - using CF9. Have SQL Server 2005 database. Only one table. Using CF for frontend. Do not know proper syntax to get INSERT to work. Keep getting "Element XXXXXX is undefined in FORM." Database name is RAWH. Columns for insert are: