Iweb auto adjust for different computer monitor settings
Nobody has the same display settings on their monitor, so how can I get iweb to auto adjust to different computer monitor settings?
Are you referring to screen size? If so many prefer to have their browser window set to the size they want unlike PCs in which the browsers usually always fill the screen blocking out the desktop.
Why not set your site width to a size that can be utilized by all, desktops, laptops and mobile devices. Apple recommends 980 pixel width for that.
There was a post about this some time ago with, if I recall correctly, some code to do that. I think Cyclosaurus posted it but am not sure.
I know its a personal preference but when I land on a site that forces my browser to fill the screen I leave and don't go back.
OT
Similar Messages
-
Can I have auto adjust for RAW, but not for JPEG?
I want auto adjust for RAW files, but NOT for JPEGs. I generate JPEGs from my adjusted RAWs and the last thing I want Bridge/ACR to do is to auto-adjust the generated JPEGs just because I looked at them in Bridge. Yet, I've been using auto-adjust on my RAW files for years and find it a useful starting point.
Is there any way to configure ACR 4 to do auto-adjust on RAW files, but not on JPEG files?Anyone have any advice on this question? I like auto-adjust on RAW files. I like the idea of using ACR capabilities on some JPEGs, but letting ACR do auto-adjust on JPEGs that I generated from hand-tweaked RAW files just ruins the JPEGs completely. Thus, I'd like auto-adjust on RAWs, but not on JPEGs. Is there any way to do this?
-
How can i transfer iWeb projects to a different computer?
This may be a simple question, but does anyone know how I can transfer an iWeb project from one computer to another, so that I can work on the site from a different computer than the one that created it?
The same way you transfer all your other documents.
~/Library/Application Support/iWeb/ -
40" Bravia for editing computer monitor?
I am purchasing a Mac Pro for editing both Avid and Final Cut Pro. I am a professional editor, so will only use the sytem for home editing 3 months a year. So... I would like to buy a high def TV for both editing and television watching (for the other 9 months). Questions:
Am i better off with a 32" Sharp Aquos (720p High Def TV) or the 40" Sony Bravia (1080p High Def TV)? How good will the picture quality be with either TV compared to a 24" Samsung COMPUTER monitor?
Can i shrink the size of the editing windows (bins, Source Recorder) on the 40" so the resolution remains better?
Thanks in advance...Can i shrink the size of the editing windows (bins, Source Recorder) on the 40" so the resolution remains better?
This statement makes it seems as though you're looking to use an HDTV as a second (or primary, maybe?) computer display. Meaning you'd feed the HDTV via DVI (or VGA) from you're Mac's video card. Is that correct?
If it is, then you'll probably be better off with the Bravia - but please confirm the exact specs when it comes to the DVI/VGA input. (Actually, do both models have the right input?)
The reason I mention this is because most 720p TVs (Sharp Aquos included) are actually 1366x768 displays. So for them to be fed by a computer properly, the computer's graphic's card must support 1366x768. Unfortunately, most Mac cards don't do 1366x768.
Most 1080p TVs, though, are true 1920x1080 resolutions and most Macs support that resolution. -
Elevate wrapper / auto prompt for different user credentials APP-V 5.0 for e.g SCCM / SCVMM Consoles
Hi I have a couple of questions about running APP-V programs as a different user,
1. What is the best way to get specific APP-V 5 package to automatically prompt for different (e.g. Admin ) credentials when it launches for E.g the Microsoft System Centre consoles?
2. If I publish an app via the APP-V server, when I do a shift right click run as different user/admin on an APP-V package it fails to launch. It's as if the other user does not have rights to the package?
However, when I run the MSI that comes with an APP-V package on a test client, I can do Run as different user.
Will I need to edit something in the DeploymentConfig / UserConfig xml files?
Kind regards,
PeteThanks will use global publishing.
To test elevated run as, I decided to try and create a Powershell script for launching Certificate Manager.
This is what I had.
A file called Test.PS1
Start-Process powershell -Credential $ID -ArgumentList “Start-Process -FilePath $env:SystemRoot\System32\mmc.exe -WorkingDirectory $PSHOME -ArgumentList $env:SystemRoot\System32\certmgr.msc -Verb RunAs”
A shortcut created to Test.ps1 on Desktop
C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -executionpolicy bypass -NoProfile -WindowStyle Hidden -file C:\PS2\Test.ps1
This worked but when I came to package it it didn't work
The shortcut changed to the below in the package and wouldn't launch.
C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -executionpolicy bypass -NoProfile -WindowStyle Hidden -file %ALLUSERSPROFILE%\Microsoft\AppV\Client\Integration\4307428B-B418-4C08-B9CA-14DA9FCB1C8C\Root\Test.ps1 /appvve:4307428B-B418-4C08-B9CA-14DA9
I can see instructions on how to embed a powershell script in deployment / user config, but no instructions on how to package a powershell script. -
Can i sign into an iWeb account from a different computer
I use iweb on my laptop to edit my web pages. I want to sign into iweb on a different Apple computer in my home and work on the website. How do I do it--or can I?
What you need is a file named Domain.sites (iWeb 2) or Domain.sites2 (iWeb 3). Copy it from your laptop to your other computer at home.
It's located in your Users/Home/Library/Application Support/iWeb folder. Place it in the same folder on the other computer.
All the files for the site are contained in that file/package. After editing you will have to publish the changes to your hosting server.
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible in Lion or Mt. Lion enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
For Mavericks, 10.9, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
where you can check the Show Library Folder checkbox.
To open your domain file in Lion or later or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT -
How do I get my laptop to remember different display arrangements for different external monitors?
I have a couple of different places where I work, and in both places there is an external monitor. As it turns out, the external monitor is on the left in one place and on the right in the other. They are different monitors, too (one's an old dell and one's a mac monitor). I remember in previous versions of Mac OS X, my MacBook would remember the display arrangement depending on which monitor was connected, and place my secondary desktop on the correct side. In Mavericks, it seems to maintain the arrangement from the last place that I changed it.
What this means is rather than my computer remembering where my external monitor should be, I have to change the arrangement of my monitors every time I switch desks.
Is this a feature that Apple removed from Mavericks? Was I imagining things in older versions of OSX?"Is there a way to display my iPhone in the finder?"
No. You can't. It's not an external drive. -
Image slideshow in FCE project - output for a computer monitor
Hi
I tried using iPhoto to export a QT file of an image slideshow. I thought it'd be a quick and dirty way to get an image slideshow for a short film. Rather too dirty, though. I guess there is heavy compression used, because the image quality is poor.
Also, I'm getting some kind of interlacing issues (flickering). I know I should be viewing on a TV, but this project is for output on a computer display.
I tried download StillLife, but this is also giving me poor quality images. I think of myself as having a fairly good grasp of resolution issues, but I can't quite get my head around what I need to do. Do I have to simply import each JPEG into FCE and add keyframed movement manually? Will this help resolution/output issues?
Many thanks.. I tried using iPhoto to export a QT file of an image slideshow....
I would start here to play on the knobs&sliders ..
what were your settings for export? "QT file" => that is many dozends of options of compression, codecs, resolutions, etc. pp ...
the consumer apps FCE and iM are meant for TV display only => reduced res + reduced colors, quality reduced due to interlace (due to TV standards) ...-
a Full Res, h264 encoded qt.mov should display your photos in shining quality ... -
CCMS Auto-Reaction for custom Local Monitor Set in RZ20
Since I am not able to modify any SAP made monitor sets I have had to make a copy of them and place them under a new heading and then I can add the systems I want to monitor.
Once I make that copy though, I want to add an auto-reaction to the set but once I hit properties it uses my RFC connections and takes me to that system. It is unlike the SAP made ones were once I click Properties it stays within the Solution Manager system and allows me to choose an auto-reaction that I have setup.
Either one of these will work for me, can I add systems to the SAP made sets or can I set an auto-reaction within Solution Manager to a copied set?
Thanks.Hi,
You can go to t-code RZ21-> Technical Infrastructure and disable the Central Monitoring. Also you can assign auto-reaction methods to your own monitor sets.
Let me know which method you want to copy and I will send you the steps.
Thanks and regards,
Rinkal
Edited by: Rinkal Salia on Dec 29, 2009 7:58 AM -
Isn't 27" too big for a computer monitor?
Human being can adapt to every new thing, But will I be able to adapt to a 27" monitor. Currently I think my 18" pc monitor's size is decent, it took more than a year for me to be comfortable with its big size, I used a 14" inch CRT before that, and interestingly now I find 13" inch macbook pro quiet small and I am not comfortable with it. Maybe the most change is in websites and new softwares that pushes users to a special sized monitor. what's your opinion?
Apparently, Being comfortable with a computer screen is a much more complicated problem than I previously thought, It's not just the display size, many other factors contribute.
Re: Eye strain from LED backlighting in MacBook Pro -
I started a web page in the lab at school and want to open the file here on my computer. I saved the application support/iweb/domain file and have tried to replace the old one with it, but that doesnt work. I looked up where you can delete the last string in the com.apple.iweb.plist file but that would not work either. I've got the site published to a folder and the domain file saved and with me but thats all
Put the copied domain file somewhere, or rename it and put it in the Application Support/iWeb folder, and double-click it. That should open it.
-
How to adjust for different numbers of components on a JTabbedPane
Hi,
I have five panels on a JTabbedPane. On one, I have six components, with each being an array of five (in other words, I have six "columns" of five "rows" each). On another pane, I have only two components (not arrays). I understand that the JTabbedPane will be as large as the largest panel. In my case, the panel with two components is as large as the one with the arrays and the two components take up the entire panel. I have tried to adjust this by using the createGlue(), createHorizontalStrut(), and createVerticalStrut() methods, but it is somewhat "ugly." I am also using the Box layout. Is there a better way to do this? I have included some of my code for reference; (sorry for its length; I am including the code for only two of the five panels). Any assistance would be appreciated.
TIA,
Jeff
Here is the code that creates the panel with the "columns" and "rows":
public MailGen construct()
//- create the controls for the emocPanel
JLabel emocActionLabel = new JLabel( "ACTION" );
emocActionLabel.setHorizontalAlignment( JLabel.CENTER );
JLabel emocOrgIdLabel = new JLabel( "ORGANIZATION" );
emocOrgIdLabel.setHorizontalAlignment( JLabel.CENTER );
JLabel emocAircraftLabel = new JLabel( "AIRCRAFT" );
emocAircraftLabel.setHorizontalAlignment( JLabel.CENTER );
JLabel emocCatLabel = new JLabel( "CAT." );
emocCatLabel.setHorizontalAlignment( JLabel.CENTER );
JLabel emocSequenceLabel = new JLabel( "SEQ. # STARTS WITH" );
emocSequenceLabel.setHorizontalAlignment( JLabel.CENTER );
JLabel emocQuantityLabel = new JLabel( "QTY OF EMAILS" );
emocQuantityLabel.setHorizontalAlignment( JLabel.CENTER );
JComboBox emocActionComboBox;
JTextField emocOrgTextField;
JTextField emocAircraftTextField;
JComboBox emocCategoriesComboBox;
JTextField emocSequenceTextField;
JTextField emocQuantityTextField;
//- create the boxes that will contain the EMOC labels and controls
Box northEmocBox = new Box( BoxLayout.X_AXIS );
Box centerEmocBox = new Box( BoxLayout.X_AXIS );
Box southEmocBox = new Box( BoxLayout.X_AXIS );
//- add the EMOC labels to the northEmocBox
//- HERE I AM USING STRUTS
northEmocBox = Box.createHorizontalBox();
northEmocBox.add( Box.createHorizontalStrut( 15 ) );
northEmocBox.add( emocActionLabel );
northEmocBox.add( Box.createHorizontalStrut( 40 ) );
northEmocBox.add( Box.createVerticalStrut( 25 ) );
northEmocBox.add( emocOrgIdLabel );
northEmocBox.add( Box.createHorizontalStrut( 40 ) );
northEmocBox.add( Box.createVerticalStrut( 25 ) );
northEmocBox.add( emocAircraftLabel );
northEmocBox.add( Box.createHorizontalStrut( 40 ) );
northEmocBox.add( Box.createVerticalStrut( 25 ) );
northEmocBox.add( emocCatLabel );
northEmocBox.add( Box.createHorizontalStrut( 5 ) );
northEmocBox.add( Box.createVerticalStrut( 25 ) );
northEmocBox.add( emocSequenceLabel );
northEmocBox.add( Box.createHorizontalStrut( 15 ) );
northEmocBox.add( Box.createVerticalStrut( 25 ) );
northEmocBox.add( emocQuantityLabel );
northEmocBox.add( Box.createHorizontalStrut( 15 ) );
JPanel mainEmocPanel = new JPanel();
mainEmocPanel.setLayout( new BoxLayout( mainEmocPanel, BoxLayout.Y_AXIS ) );
mainEmocPanel.add( northEmocBox );
//- add the EMOC controls to the centerEmocBox
Object[][] emocFieldTable = new Object[5][6];
for ( int index = 0; index < 5; index++ )
centerEmocBox = Box.createHorizontalBox();
emocFieldTable[index][0] = new JComboBox( actions );
( ( JComboBox ) emocFieldTable[index][0] ).setBorder(
BorderFactory.createLineBorder( Color.BLACK, 1 ) );
emocFieldTable[index][1] = new JTextField( 3 );
( ( JTextField ) emocFieldTable[index][1] ).setBorder(
BorderFactory.createLineBorder( Color.BLACK, 1 ) );
emocFieldTable[index][2] = new JTextField( 3 );
( ( JTextField ) emocFieldTable[index][2] ).setBorder(
BorderFactory.createLineBorder( Color.BLACK, 1 ) );
emocFieldTable[index][3] = new JComboBox( categories );
( ( JComboBox ) emocFieldTable[index][3] ).setBorder(
BorderFactory.createLineBorder( Color.BLACK, 1 ) );
emocFieldTable[index][4] = new JTextField( 3 );
( ( JTextField ) emocFieldTable[index][4] ).setBorder(
BorderFactory.createLineBorder( Color.BLACK, 1 ) );
emocFieldTable[index][5] = new JTextField( 3 );
( ( JTextField ) emocFieldTable[index][5] ).setBorder(
BorderFactory.createLineBorder( Color.BLACK, 1 ) );
centerEmocBox.add( ( JComboBox )emocFieldTable[index][0] );
centerEmocBox.add( ( JTextField )emocFieldTable[index][1] );
centerEmocBox.add( ( JTextField )emocFieldTable[index][2] );
centerEmocBox.add( ( JComboBox )emocFieldTable[index][3] );
centerEmocBox.add( ( JTextField )emocFieldTable[index][4] );
centerEmocBox.add( ( JTextField )emocFieldTable[index][5] );
mainEmocPanel.add( centerEmocBox );
//- create the SEND and CANCEL buttons
JButton emocSendButton = new JButton( "SEND EMAIL" );
emocSendButton.setBackground( Color.white );
emocSendButton.setBorder( raisedBevel );
JButton emocCancelButton = new JButton( "CANCEL" );
emocCancelButton.setBackground( Color.white );
emocCancelButton.setBorder( raisedBevel );
//- add the buttons to the southEmocBox
southEmocBox = Box.createHorizontalBox();
southEmocBox.add( emocSendButton );
southEmocBox.add( emocCancelButton );
mainEmocPanel.add( southEmocBox );Here is the code that creates the panel with only two components:
//- create the controls for preguardPanel
JLabel preguardActionLabel = new JLabel( "SELECT ACTION" );
preguardActionLabel.setHorizontalAlignment( JLabel.CENTER );
preguardActionLabel.setPreferredSize( new Dimension( 100, 10 ) );
JComboBox preguardActionComboBox = new JComboBox( actions );
preguardActionComboBox.setBorder( BorderFactory.createLineBorder(
Color.BLACK, 1 ) );
preguardActionComboBox.setPreferredSize( new Dimension( 30, 10 ) );
//- create the SEND and CANCEL buttons
JButton preguardSendButton = new JButton( "SEND ACTION" );
preguardSendButton.setBackground( Color.white );
preguardSendButton.setBorder( raisedBevel );
JButton preguardCancelButton = new JButton( "CANCEL" );
preguardCancelButton.setBackground( Color.white );
preguardCancelButton.setBorder( raisedBevel );
//- create the boxes that will contain the preguard label and control
Box northPreguardBox = new Box( BoxLayout.X_AXIS );
Box centerPreguardBox = new Box( BoxLayout.X_AXIS );
Box southPreguardBox = new Box( BoxLayout.X_AXIS );
//- add the preguard label to the northPreguardBox
northPreguardBox = Box.createHorizontalBox();
northPreguardBox.add( Box.createGlue() );
//northPreguardBox.add( Box.createGlue() );
northPreguardBox.add( preguardActionLabel );
//northPreguardBox.add( Box.createGlue() );
northPreguardBox.add( Box.createGlue() );
JPanel mainPreguardPanel = new JPanel();
mainPreguardPanel.setLayout( new BoxLayout(
mainPreguardPanel, BoxLayout.Y_AXIS ) );
mainPreguardPanel.add( northPreguardBox );
//- add the preguard control to the centerPreguardBox
//- HERE IS THE "GLUE" I AM USING
centerPreguardBox = Box.createHorizontalBox();
centerPreguardBox.add( Box.createGlue() );
centerPreguardBox.add( Box.createGlue() );
centerPreguardBox.add( Box.createGlue() );
centerPreguardBox.add( Box.createGlue() );
centerPreguardBox.add( preguardActionComboBox );
centerPreguardBox.add( Box.createGlue() );
centerPreguardBox.add( Box.createGlue() );
centerPreguardBox.add( Box.createGlue() );
centerPreguardBox.add( Box.createGlue() );
mainPreguardPanel.add( centerPreguardBox );
//- add the buttons to the southPreguardBox
southPreguardBox = Box.createHorizontalBox();
southPreguardBox.add( Box.createHorizontalStrut( 10 ) );
southPreguardBox.add( preguardSendButton );
southPreguardBox.add( preguardCancelButton );
mainPreguardPanel.add( southPreguardBox );Here, I am adding the panels to the JTabbedPane:
//- add the panels to the tabbed pane
JTabbedPane pane = new JTabbedPane();
pane.add( "EMOC", mainEmocPanel );
pane.add( "PREGUARD", mainPreguardPanel );
}This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Designjet board here:
http://h30499.www3.hp.com/t5/Printers-Designjet-Large-Format/bd-p/bsc-414
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too. -
Time Characteristics: MTD and Yesterday (How to adjust for different times
Hi,
I have this report which runs daily without any user input based on
Current Calendar Day (SAP Exit)-1 [for column 1 on the report]
and
Current Calendar Month [for column 2 on the report]
If today I want to run this report for the Jan 20, 2006 how best can this be done without the need for writing ABAP code?
i.e. I want on the report, column 1 as Yesterday(Jan 19, 2006)
and column 2 MTD (Jan 20, 2006)
Any help?Dear Amanda,
The restriction on key figures is done in a similar way as the restriction on characteristics.
I guess that you have a characteristic 0CALDAY "Calendar Day", which is restricted by variable 0DAT. By this you have defined the subset of your InfoProvider, on which you want to report.
Now, add the key figure which you want to restrict by a fixed date. Select "Edit" from the key figure's context menu and drag 0CALDAY upon the key figure. Restrict 0CALDAY by "January, 29th 2006". Add the same key figure a second time and restrict it by variable 0CALMONTH. Add the same key figure a third time and restrict it by the fixed time frame "January, 1 2006" to "January, 20th 2006".
This should work as you intended. If you have more than one key figure which has to be restricted in this way, it could be more appropriate to create a second structure with the above mentioned restrictions instead of restricting the key figures directly.
Greetings,
Stefan -
How can i disable "browser-auto-load" for different iframe-contents in a composite widget?
Hey there,
i´ve got a lil topic going on with a Website (One-Site-Layout with anchors), created with muse
i putted 20 iframes (each one routed to its own trigger) in a composite widget. Everything is working perfect for me and the users, but :
The deliverer of the iframe-contents (pretty big picture galeries) told me, his server crashes, because every single time, someome enter the Website, the browser i loading every single iframe-content in this widget automatically > so the traffic is way to large, and i need a solution that simply load every single content after a click on the right trigger, not before.
thank you so much!
Werner
Gonna let you see the the "trouble-area" http://werner-ag.com/#produkteThat is not possible.
You can look at this extension:
*https://addons.mozilla.org/firefox/addon/toggle-mixed-active-content/
*https://developer.mozilla.org/Security/MixedContent -
Panel collection with auto height for different screen resolution
Hi.
I created a page using panel collection by default height for 1024 * 768 screen resolution and works fine. When I change the screen resolution to 1152 * 864 then my page layout changes as I can see lot more space at bottom due to fixed height define for panel collection.
Here my question is how to make height as dynamic for panel collection which can changed based on screen resolution. Usually percentage for height attribute resolve the issue but JDev 11.1.1.4.0 doesn't support percentage its allows only pixel or em.
Please let me know to resolve this issue.
ThanksIf you want a table to occupy 80% of the height of the screen you should be able to do this with assigining % to the various panelStretch facets - like this:
<af:form id="f1">
<af:panelStretchLayout id="psl1" topHeight="10%" bottomHeight="10%">
<f:facet name="bottom">
<af:spacer width="10" height="1" id="s2"/>
</f:facet>
<f:facet name="center">
<af:panelCollection id="pc1">
<f:facet name="menus"/>
<f:facet name="toolbar"/>
<f:facet name="statusbar"/>
<af:table var="row" rowBandingInterval="0" id="t1">
<af:column sortable="false" headerText="col4" id="c1">
<af:outputText value="#{row.col4}" id="ot1"/>
</af:column>
<af:column sortable="false" headerText="col5" id="c2">
<af:outputText value="#{row.col5}" id="ot2"/>
</af:column>
</af:table>
</af:panelCollection>
</f:facet>
<f:facet name="start"/>
<f:facet name="end"/>
<f:facet name="top">
<af:spacer width="10" height="1" id="s1"/>
</f:facet>
</af:panelStretchLayout>
</af:form>
Maybe you are looking for
-
I rented a movie on Itunes last night and I watched half of it before falling asleep. Today I tried to open the movie and watch the last half but I cannot find it. It has been less than 24 hours since I rented it. Where can I find the movie?
-
When I try to activate my cs 3 premium production, I get a message saying NO CONNECTION. Everything is in order though. How can I get an activatioon number other then trough the web??
-
When I upload files using Fetch I can choose the encoding - this means my non-standard characters in file names are preserved. When I upload in Dreamweaver this is lost and the files are useless. I can't find anything similar in Dreamweaver - does it
-
What does the parameter "recordFileName" in basejpi.htm?
Hi, What is the purpose of the parameter "recordFileName" that we find in the basejpi.htm file? Regards Ricardo
-
I have a servlet that processes incoming files (chosen using the filechooser on a form). I'd like to be able to create a new file, either in a jsp or servlet, and pass it to this servlet. How do I pass files over to the servlet without using a form (