IWeb basic problems? Issue with galleries

Hi,
A while ago I posted a question about a photo gallery I was trying to display, which went something like:
"Hello,
Just finished putting together a website for my brother but having issues with the gallery. I have a portfolio page for his photos. When I'm in iweb the photo album covers scroll nicely between images and link straight to the photo gallery page. But when I put it online I click and nothing happens, as you can see here:
http://www.guycollier.com/guycollier/EdmundCollier_Theatre_Photography_My_Portfolio/Edmund_Collier_Theatre_Photography_MyPortfolio.html
Does anyone know why? This is driving me crazy. I have deleated and uploaded the sight several times from iWeb and also Filezilla and Cyberduck but have the same issues. Please help!
ps. also if anyone knows how to set the title of the page in the browser then that would be great too!"
I have finally got the time to get back to it and have been trying various options suggested by users, including deleating and rebuilding the gallery, but it still doesn't work either online or on a local hosting. It was suggested that I might have some basic iWeb problems. Any idea what these maybe and how they might be resolved?
Thanks
Guy

Thanks for the suggestion. I rebuilt it and without making any changes to the layout it seemed to work ok. However, when I have made some minor changes (putting a frame around the images, changing the layout slightly, removing the navigation menus) it no longer works. Any idea? Might I be deleting something by accident?
Guy

Similar Messages

MacBook charger problem/Issue with charging

I've got the newest revision MacBook and there's a big problem with my charger. First, let me note that I've got the newest battery update, and have recently reset my PRAM and PMU. Inn addition, I've installed the new firmware update, and that has only seemed to make it worse. The trouble is that when I plug the MagSafe into my MacBook, it either:
a) shows me no indication that it the power cord is connected, or;
b) a dim green light appears where there should be a brighter green one that turns orange.
Now, I can sometimes stare at the little prongs coming out of the MagSafe connector to see how to best align the male and female ends. However, this still takes 5-10 minutes to do if it works at all, and the slightest motion disconnects the power. Does anyone have any suggestions? Is this a software problem, an issue with the charger, or one with the computer itself? If you need to see pictures to tell, I can post them on flickr and give you a link. By the way, this is bad enough that I am typing on a Windows PC right now, against my will.

I have exactly the same issue.
In when i connect the macbook to the power adapter, there's no bright light showing (only very vague green in the dark) , and it shows in the system profiler that its connected but not charging.
i changed the power adapter but the problem still exist, tried to change the battery as well, but didnt work as well, what is the part which is having a problem in this case?!
By the way also completed al restds (SMC etc).
It is time that Apple provides a solution I figured out is is a common problem.
any solutions?

NetBeans problem: Issue with servlets and Chinese character encoding

Java Version: JDK1.5.0_01, JRE1.5.0_01 (International version)
Netbeans Version: Netbeans IDE 4.0
OS: Windows XP Personal Edition
Dear Sirs,
First at all thanks for reading this post. I am having the following issue. I am creating an application using html pages and servlets. I am using Chinese and English languages on them (html encoding UTF-8).
I created a project in Netbeans and added an idex.html screen reporting to a servlet. Both index.html and in the servlet generated html page contains the line:
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
Additional, I setup the character code settings in Netbeans:
(tools-options-Java sources-Expert-default encoding=UTF-8
When I run the project, index.html displays itself perfectly, with the Chinese characters displayed properly. The problem comes when the html created servlet is displayed, which instead of the Chinese characters some strange characters are displayed (�� instead of Chinese).
I have tried different encodings from http://java.sun.com/j2se/1.4.2/docs/guide/intl/encoding.doc.html without any luck. I also setup the encoding of the file itself (using right click-properties in the project menu of Netbeans).
Also, when I am editing the servlet, the characters are displayed properly. I type them directly without any issue, but then the display is wrong at runtime.
Also, just in case this have something to do with the problem, my PC was bought in US, therefore the default character set is not Chinese. I had to install the Chinese typing stuff later on. But like I said earlier, the html page is displayed properly, so I really think is some problem with Netbeans.
After a week trying to find a solution, I decided to post it here in the hopes that someone will show me the way of the light.
Thanks in advance for any ideas or help provided
Aral.

Ok, I found out some problems with Netbeans as well.
    public void doGet(HttpServletRequest request,
                      HttpServletResponse response)
        throws IOException, ServletException
        response.setCharacterEncoding("UTF-8");
        request.setCharacterEncoding("UTF-8");
        response.setContentType("text/html");
        PrintWriter out = response.getWriter();
        byte[] st = {-25,-75,-124,-27,-100,-106,-17,-68,-102,-27,-80,-113,-27,-72,-125,-26,-118,-75,-26,-105,-91,-27,-82,-93};
        out.println("this works: ");
        out.println(new String(st,"UTF-8"));
        out.println("<br>");
        out.println("this doesn't: ");
        out.println("some chinese copied from the Internet<br>");Right click the .java file and choose properties -> encoding UTF-8
Then I make a copy of the .java file, rename it to html and open it with IE sure enough
the Chinise is allready unreadable (not it's still readable in the IDE);
When I compile the file with F9 I get the following error:
whatever.java:101: warning: unmappable character for encoding Cp1252
Tried to set the encoding to UNICODE but then the file doesn't compile.
I gues you have to download the Japanese version for it to work correctly.

Photo Gallery problem issue with explorer browser

Hi there,
I made a personal website with a photo gallery from iweb and everything run cool in a Mac system but when I visualize my photogallery from my website in an Explorer Browser from windows, my pictures doesn´t appear, we cannot see anything.
Is anything to do to fix this problem?
Thanks,
Marco
the site is this www.marcoluz.com

There are three patches to fix iweb photos page for FF3 posted in this forum:
http://discussions.apple.com/thread.jspa?threadID=1563823
http://discussions.apple.com/thread.jspa?messageID=7418611

ONEKEY IDEACENTRE PROBLEMS - issues with one key boot

HI there.
I've been reading about problems with onekey while having similar "free up buffer errors" and "please create a new base backup." messages coming up all the time. Every 1 to 4 days
The message started coming up every 4 days and the base backup started taking 1hour then 2 hours,
then the next time 3 hours.
But I was not storing anymore data on my hard drive. In fact, I had freed up space by deleting some old files I didn't need.
Anyway,
Finally I decided to turn off Lenovo Backup, as many have suggested on this forum.
My PC restarted no worries then onekey came up with a updating your system? And took 10 minutes to reach one percent! Then another 10 minutes to reach 2 percent.
At that rate it would take 14 hours plus to update. That's ridiculous.
Also I had turned onekey OFF.. not clicked on update my base back up so why the updating
The API call must have failed or somethings buggy with onekey.
At 6 percent (the one hour mark it was clear something was wrong with the speed of the update.)
The PC was running fine in all respects other than onekey messages.
I tried to boot to a recovery CD but no boot device worked before ONE key comes up with it's screen.
Please could someone offer some suggestions, or PM me a way to bypass the one key at boot so I can do a clean reinstall back to factory settings. I've tried choosing the restore to factory image, from the LVT pre windows menu. But still it begins to update at 10 minutes per percent. A Solution may help others with similar onekey problems too.
I'm now using my old backup PC.
I've seen a lot of PC issues, and this is a software issue, The hardware is fine and my PC is new.
Something is up with onekey and the way it runs its software previous to windows booting, and the way the one key pre-OS does not allow the PC to boot from the CD DRIVE or USB DRIVE even if those devices are choosen as first boot options.
Thank you very much,
Gadget
PS. There must be a key combo or method to stop or bypass onekey running at boot rather then onekey bypassing all other normal and reasonable boot options so that I can use the restore CD and go back to the factory setup OS. Thanks again
Message Edited by GADGET on 09-03-2008 05:44 AM
Solved!
Go to Solution.

Hi Titan,
Thanks for this. I'll look into it and see what the changelog says about OKRUPDATE_V3.EXE for next time.
To cut a long story short, after much discussion about the issue, A very helpful person from Lenovo Tech support suggested we try system recovery (f2 key pre-windows) back to factory restore again, even though it had not worked the first time.
Well the second time it worked. So I went back to factory install of image. I'll not use, for now, onekey restore until I know more about this new version of OKRUPDATE. But It's good to know its there and I'll look into OKRUPDATE_V3
Hats of to the tech support person, and to you folks for your suggestions....
Thanks....
Problem solved.
Gadget,
PS. after doing the system recovery back to factory restore, the bios boot order now works too.
Message Edited by GADGET on 09-04-2008 10:59 PM
Message Edited by GADGET on 09-04-2008 11:06 PM

Windows 8 and LR tethering issue with D7000

I just purchased a new Lenovo W20 laptop with Windows 8 pro, installed LR and PS6. All of this is up to date on patches.
I tried to tether my Nikon D7000 to a USB 2.0 and USB 3 port and have the same issue...
LR sees the D7000 and lists it in the tethering bar and sees the settings for aparture, ISO, and shutter speed. Problem is it will not import and show the files from the camera when I shoot, nor will it trigger the camera with the LR tethering button.
I have successfully shot with this camera when tetered to another laptop using windows 7 and the same LR current version.
Do I likely have a LR or Nikon driver issue, or is there some basic compatability issue with Winodws 8 that is yet to be worked out?
When I use explorer, i can see the files on the D7000 and the thumbnails show up fine in explorer.
Leroy

Are they using the built in reader in Windows 8 or is it opening in Adobe Reader?
I've noticed the built in reader app doesn't close files unless you close out of the application. So, you wouldn't be able to delete them until you close them.

URGENT HELP PLS : Issue with Multi Level Master Detail block

This is an issue someone else had posted in this forum few years back but there was no solution mentioned, I have run into this same issue , The problem is as explained below.
Any help on this is appreciated.
Scenario:
There are 3 Blocks in the form : A (Master Block)
: B (Detail of A )
: C (Detail of B )
There is master detail relation created between A and B and B and C. So initially when we query for a record in Master A, it shows all records properly in B and C.
Now if i navigate to the first record of B , and then second record of B , records corresponding to that record shows up properly in C block.
Till now everything works fine.
Issue 1:
But in case after querying initially on Master Block A,If I go directly to the second record of B block, it clears the whole B block and C block.
Issue 2:
Same thing happens if I am on C block ( corresponding to second record of B block) and then navigate to first record in B block , it again clears the whole B block and C block.
Please Help !!
Thanks !

Thanks Xem for Your reply , I tried those settings but it did not help..here is the original link that to the thread that talks about the same problem ,
Issue with Multi Level Master Detail block
The last update to this was the following :
"I figured out that this is happening because Block Status is set to 'Changed' and this is causing it to clear out the blocks.
But cant figure out why the status is setting to 'Changed' "
Any Help from the form Gurus on this form in this matter is truely appreicated !!
Thanks,
Zid.

I have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3

i have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3.
the problem is best explained on the following one - page thread:
https://discussions.apple.com/thread/3951518?start=0&tstart=0
(Clearly i'm not alone in this problem, although i think i figured out what's going wrong a little more than he did...read on!)
his solution, to put mainstage in jump mode, is very unsatisfactory to me, as it bounces all of a sudden to drastically different settings.
basically, my analysis is that my controller is NOT receiving MIDI date from mainstage. in other words, mainstage knows what my controller is doing, but my controller doens't know what mainstage is doing.
let's say i turn the knob all the way to the right ... 127...and the virtual fader goes to the right like it's supposed to.
now...next...let's say i change to a different patch, where that same VIRTUAL fader is not at the max clockwise position..maybe it's only at 1pm. now when i turn the physical knob to the RIGHT, the midi data is still at 127 on the controller! it didn't "reset" to sync up with the new level (say 80 or so) setting on the new patch. so i can't increase that new setting of 80 by continuing to turn the knob to the right. i have to turn it all the way to zero,...and then continue PAST zero until the controller thinks that IT is at 0...at that point the controller and mainstage are in agreement, and things work fine....so bascially, the keyboard thinks the level is at max...but mainstage thinks the level is at 1pm.
i am using Logic 9, and i have a macbook pro 2.9 Ghz I7 with 8 gigs of memory and OS X 10.8.4

Hi Josh,
Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
Thanks.
Mike Towns

IWeb not opening after some issues with an existing site...

Hi there~
I’m a relatively new Mac user and a former PC/Dreamweaver user. I’m having a bit of an issue with iWeb. I’ll do my best to keep what happened relatively brief:
1. I had created and published a site a couple of months ago, but the page that contained photo albums seemed to have become corrupted. Every time I tried to open that page, iWeb would crash.
2. I recreated that page but then was not able to delete the corrupted version. So I recreated the whole site.
3. I published the new site, and everything seemed to be working well in the live version.
4. To avoid confusion in the future, I wanted to get rid of the old site. When I deleted that site, I saw that it said something about deleting it from the Web as well. I realized that this may cause problems because most of the pages would have the same names, but I was hopeful that since the new site had all of the pages I could just republish.
5. The new site did indeed get messed up after I deleted the old site. So I set the new site to republish, and then I got an error message.
6. I figured just for safety’s sake I would undo the deletion of the old site and just leave it for a while in the hopes that the new site would then work again.
7. After I did this, the old files reappeared, but then iWeb froze. (I think... My memory is a little fuzzy here...)
8. I closed and reopened iWeb, but all that appeared was that little right-hand box that lets you see the properties of certain things (Page, Photos, Text, etc). I also restarted the computer, and now when I open iWeb, that little box is still all that I’m getting.
I grabbed what I could from the live version and my history files so that I can recreate the site from scratch if I need to, so I’m not terribly worried about getting my files back. I did have another site created in iWeb that seemed to be fine, it would be nice to not have to start over with that one, but obviously I can if needed. Maybe those files can be found elsewhere on my computer?
So will I be able to get iWeb back? Do I need to reinstall it? If so, how do I do that? (Maybe that’s a question for another forum. iLife was installed on the Mac when we got it, I looked briefly for the files on the Applications CD but got a little scared off when I saw something about bundled applications...)
Thanks so much for any help. I called tech support and was directed here, this is new for me, so I hope I’m going about this in the right way. I’ll spend some time looking around to see if anyone has addressed this elsewhere, I just wanted to get things down while it was all relatively fresh in my head.
Thank you!
Jen

Welcome to the Apple Discussions.
. Every time I tried to open that page,
That sounds like the problem described here with potential fixes: iWeb & iWork: Applications may suddenly quit after updating to Mac OS X v10.6.2. This is another possible fix: The million dollar trick or how to fix iWeb in 10.6.2
OT

Photo file issues with iWeb and Aperture....also too much duplicating!!

A little background, before I get into my iWeb issue.....
Years ago I tried iPhoto, but I didn't like how it duplicated all my photo files and I wasn't very fond of the file structure it created. Years later (last month) I got Aperture. Aperture (still has a long way to go) also duplicates all your files and places them in their own file structure. If I can get along with Aperture (and if it will get along with my other programs), I won't mind putting all my files into the file structure it creates. But for now, I still have my original files in the original file structure I have had for many years as a back up.
On to my issue with iWeb and Aperture....
To add photos to iWeb, you can either go into the iWeb media center or you can drag and drop photos from other locations.
1st: iWeb media center
To get my photos into the media center, I would have to load them into iPhoto (iP 6 does allow you to keep your original file structure, but it still creates .jpg files, which fills up your hard-drive. More duplicates I don't need or want). So that is out for me. iP6 will let you view and use your Raw files.
Another way is to drag and drop your file structure directly into the media center window. I don't think this duplicates any files (at least I haven't been able to find any), but it takes an awfully long time to thumbnail all your photos (several hours and still waiting for 22K + files). Also, it won't show any Raw files. Again, out for me.
Aperture won't let you drag and drop its library into the media center at all. So if I was to move all my files into the Aperture Library, I wouldn't be able to access them for iWeb at all.....Out for me.
2nd: Drag and Drop
I was able to drag and drop Raw files directly into iWeb from C1 Pro, Adobe Bridge and Adobe Lightroom.
As I said before, I am trying to move over to Aperture. However, Aperture won't let me drag and drop photos. What is the deal here??? These are both Apple programs and they won't play nice with each other. Very annoying.
Anyway, I put a link below to my iWeb test webpage I made. All the photos were Raw files that I did a drag and drop from C1 Pro, Adobe Bridge and Lightroom. There were no problems with the publishing.
http://web.mac.com/phil_navarro/iWeb/Site%202/Drag%20and%20Drop%20test.html
So, does anyone know if they can get photos from Aperture to work?? Thanks for any responses.
Phil
G5 Desktop Mac OS X (10.4.4)

Jedi,
Perhaps you are right.
I am not a web developer and I will never be. I don't feel like spending countless hours learning how to use Dreamweaver or some other Pro web app. iWeb looked like a way to start making websites of my photos for my friends and family (much easier and better than Home Page on .Mac). All I was asking was for a way to drag and drop my photos (especially Raw files) with Aperture. Which I can do with Lightroom, Adobe Bridge and C1 Pro, and without using iPhoto.
I am not a Pro photographer either, but I purchased Aperture based on what was advertised on the Apple website. From that ad, Aperture fit my photo needs almost to a tee. I am looking to adjust Raw files, Crop, Archive and keep my use of Hard Disk space down to a minimum. I can use Photoshop for the other 5% of things I do. However, Aperture has some issues (if you own it, then you already know. If you don't, you can read the Aperture Forum) This is one of the reasons I never went to iPhoto for archiving. I didn't like the way it duplicated all my files, taking up more disk space and its file structure. So even though Aperture won't play nice with other programs, I was surprised that it wouldn't play nice with any Apple programs.
After reading your post and based on what you are saying, everyone either needs to have/learn/use Pro apps only or have/learn/use iApps only. Don't Cross the Streams!!
I guess that means Apple will need to fix DVD Studio Pro. It uses photos that are in your iPhoto library and music from iTunes (iApps in a Pro app??....for shame...."it was never intended"). Also, DVD SP won't read the Aperture library. Does that mean there are 3 platforms? Pro, iApp and Mediocre??
Now I have 2 questions:
1. Can someone please tell me which apps are Pro and iApp, or if there is Mediocre? I don't want to mix them up and "Cross the Streams".
2. Again....is there anyway to use Aperture with iWeb?
TIA,
Narvon

Strange issue with iWeb site, please help

Hi everyone,
Until recently, I've been keeping an iWeb blog of my time in India. Nothing too complicated, just stories and photo albums. However, recently something strange has happened, and the website is no longer displaying correctly. It looks fine in iWeb, and when I publish it in a folder and open it locally, everything is fine. However, after uploading it to my hosting provider, it looks like this:
http://www.egbertopreis.nl/India/
(screenshot of what it looks like here: http://egbertopreis.nl/website_screenshot.PNG )
This is a screenshot from iWeb of what it should look like: http://www.egbertopreis.nl/iWeb_screenshot.png
I'm using the 'darkroom' theme, but as you can see, something is clearly wrong. It is not displaying the menu correctly, the layout looks strange and it isn't loading any of the articles. The other pages are accessible if you navigate there directly, but there you have the same problem.
It looks like, for some reason, the CSS and javascript elements cannot be loaded, although I have no idea why this might be the case. They are all just static files, and it worked fine until about a week ago.
Although I'm an IT professional, I have literally no idea what could cause a problem like this. I went with iWeb because I wanted to use an 'easy' solution and not over-engineer something for once
Usually what I'd do in a situation like this, is just purge the whole site and re-upload it. However, since I'm traveling around, I don't have fast internet access anywhere and the site is now so large that it would take forever to completely re-upload. This is also the reason why I can't troubleshoot it properly myself...
Any help (or even words of encouragement :-)) whatsoever would be extremely welcome. Thanks in advance!
Message was edited by: Heliode
Edit: Forgot to mention what I already tried myself;
- deleted the HTML and XML files and let iWeb do 'publish changes'. Everything was re-uploadeded, but issue remained.
- Deleted the 'Scripts' folder on the remote host, and manually re-uploaded from locally published folder. No effect.
- Tried randomly changing layout items in the hope that any potentially corrupted files might be overwritten after publishing. No effect.

Hi Roddy, thanks for your reply. It wasn't just me though; a lot of other people from back also reported the same issue. I was also getting the same thing from behind a wired connection. You can still see and experience the issue yourself if you look here.
I've since 'resolved' the issue by getting a .Mac trial account. A friend helped me move the whole blog over there, where the site works as it is supposed to:
http://web.me.com/eggmeister/India/
Therefore the issue has to be with the hosting. Right now I'm suspecting it might be some obscure configuration issue with the hosting company's server. Maybe something like too low a setting for Apache's 'MAX REQUESTS'. This might cause issues with all the javascript going on in the iWeb pages, loading elements back and forth. I'm in contact with the hosting provider, and will let you know what I find. Might be useful for future reference.

IE Scolling/Lag issues with IWeb Published Site

Has anyone had any issues with scrolling/lag with Internet Explorer on an iWeb published site? I have a site that runs great on Firefox and safari but terrible on Internet Explorer. I'm thinking it may be the template/design i used?
Anyone every seen this? Any suggestions?
Thanks,
JC

I've only ever used the Modern Frame, so I can't say if there would be a performance issue using a different template. I have about three pictures on each page.
I noticed on your site that you're using the "reflection" effect on some of your pictures. Just for the purpose of testing, perhaps you could try turning off that effect and then re-uploading your site to see if that is causing some of the problem? I believe the reflection is rendered using javascript code, which may be causing the poor performance in IE. If that does turn out to be the problem, you can decide whether it's worth it to keep the effect or not.
By the way, I don't get that same error message in IE when I open your Videos page. Maybe it's caused by a security setting in your IE being set at a more restrictive level?

IWeb issues with comments

I have read through many posts about this issue but have not been able to resolve my problem. I have been running my iweb site with a domain since the beginning of the year. I have had issues with the comments form not loading properly before but it has always fixed itself. The problem I am having currently has been going on for almost 10 days now.
I have reloaded my site many times. I have uploaded it without comments, and then with comments again. I have checked my DNS hosting and it is being routed to web.me, I have checked mobileme and my domain is web.me, I have checked iWeb and it has @me.com. Yet, when the comments form loads it goes to mac.com. I have tried this on my hubby computer and it seemed to load fine, yet on my computer and those of some of my friends, have said they are unable to load.
I am very frustrated and don't know where to head next. I am computer savvy but not enough to get into code and all that. Is anyone able to help me?
Message was edited by: studentoflife

Same problem here. The form to add comments on an iWeb blog published on MobileMe is broken. It doesn't load all the objects correctly, and site visitors cannot comment. I wonder if it's some kind of server-side error. When using Safari's JavaScript debug console, I get this:
Failed to load resource: the server responded with a status of 404 (Not Found)
/WebObjects/Comments.woa/Contents/WebServerResources/English.lproj/images/commen ts_header.gifFailed to load resource: the server responded with a status of 404 (Not Found)
/WebObjects/Comments.woa/Contents/WebServerResources/composeComment.jsFailed to load resource: the server responded with a status of 404 (Not Found)
/WebObjects/Comments.woa/Contents/WebServerResources/English.lproj/images/commen ts_header.gifFailed to load resource: the server responded with a status of 404 (Not Found)
comment:11ReferenceError: Can't find variable: onPageLoad
Profile "Profile 1" started.
2ReferenceError: Can't find variable: authenticate
OK, all you WebObjects gurus out there--clue us in on this one!

I have an issue with pricing condition ZPRO (basic price )

Hello gurus
I have an issue with pricing condition ZPRO (basic price ).
users created a sales order, and the basic price ZPRO which is mannual is added twice ,now i want to put a check so that condition tpye zpro is not accepted twice by the system. please let me know how can i restrict system from accepting condition type zpro twice during sales order.
regds
Edited by: sapuser09 on Jul 26, 2011 8:44 AM

Hi,
Solution for this is very simple. Don't make any changes to the sales order user exit. Use condition exclusion for the condition type.
Do customization in the following path of IMG
Sales and distribution---- > Basic Functions--- > Pricing--
> Condition exclusion -- > Condition exclusion for groups of conditions
First In Define condition exclusion groups you have to define condition exclusion group (ZXXX)
Then in Assign condition types to the exclusion groups you have to assign condition type to the exclusion group (ZXXX ZPRO)
Then in Maintain Condition exclusion for pricing procedures select the pricing procedure where you have the problem and click Exclusion box present in Dialog structure box
You will be faced with Change view exclusion overview screen Click new entries
You will be faced with New entries overview of added entries screen.
Take serial no as 10 Condition exclusion procedure as B (Best condition with in condition type) In the exclusion group1 add the exclusion group ZXXX.
Save it and create order.
In the order pricing you will again observe that ZPRO appearing twice but only one will be active.
Changing user exit for this issue is not at all required and it must be only the last resort Try replicating the issue in your sand box system. As I had mentioned it will be picked twice but only one will be active.
Hope this helps.
Edited by: mokirala tilak on Aug 10, 2011 10:19 AM

Does Verizon ever provide a different model phone if the customer has basically had the same issues with 3 prior 'replacemet' (refurbished) phones?

I have owned a Samsung Galaxy Stellar for the about the past year and a half, which is only my second smartphone. I am not a whiz at all this but I'll try to be coherent. I had problems with the Stellar from the beginning: Very slow loading browser, problems with the cursor, etc. After about 6 months, the phone dropped, and no, I didn't throw it on the ground!
I have insurance and it was still under warranty, so it was replaced, by Assurian, I believe. The replacement phone had the same problems, plus a whole lot more. During calls, the wifi, and/or Bluetooth options would appear, or the phone would suddenly go on mute. In addition, when I tried to access my voicemail, what I heard was my own voice and outgoing message, not the one from Verizon asking for the password. These problems were intermittent, which made the Verizon employees dubious, but it's like the car that you take to the garage that suddenly works fine. Anyway, there were some other problems too, so I got a replacement phone again, which is the phone I currently have had for about 3 months. A few days ago it went from bad to worse. In fact it went Crazy!: Every call I make or receive is immediately dropped. Maybe after 5 or 6 tries, I can complete a call, but rarely. When I do, the mute and speaker options spontaneously activate, at the same time!! When I go into my voicemail, the messages are deleted in rapid fashion, one after the other, and I cannot get them back. Or, as I said earlier, the Wifi/Bluetooth screens appear, and it's difficult to punch in any numbers as I have to hit the back arrow many times. Strangely, the phone makes odd sounds: It buzzes or makes this odd chiming sound! If I didn't know better, I would think that I have finally lost my mind! I could go on but you have the gist. The phone is simply not workable. I phoned tech support, and she was very nice. After an hour on the phone, it worked ok, until the following day. She didn't do a factory reset, but she had me take the sim card and battery out. She did things on her end, which unfortunately I don't recall, but the phone worked ok until the following day, when it went crazy again.
I took it to the corporate Verizon store where I live, The guy said "It's a lousy phone, a cheap, bottom of the line phone." By the way, throughout this time, I had had about 6 hours with tech support, between this phone and the last one.
THIS IS MY QUESTION: I asked him if I could have a totally different phone, since this model is clearly defective. He said no, but they could send me another replacement. He told me to call trech support while I was there in the store and ask them, because they don't do repairs at the store. The tech on the phone told me the issue is with my Gmail account! That there is a virus on some phones and each time I get a replacement phone, because I have kept the same Gmail account, the virus keeps getting 'transferred', for lack of a better word, to the next phone. I was totally incredulous. Virus? She said, "Well, I use the term loosely, but it's just a weird glitch.When you get a replacement phone, bring it back and we'll save and upload all your data, and set you up with a new email account." I was confused and annoyed, as I had never heard of this, and felt I was getting the runaround. I asked her if they could give me a different phone (free of charge) and of course the answer was no. By the way, I should mention that the Stellar is no longer made. These are my options, according to the 3 different Verizon employees I spoke with: I am eliblele for the early upgrade which they call the Edge. From what I understand, it's the full retail price paid out over 2 years, with a partial payment made at time of purchase. One person told me that after 24 months, they would accept what I paid as payment in full? Sounds too generous. Option 2 is $50 of a new phone, and option 3 is to buy a new phone at a Verizon store that is having an android sale. So, I acquiesced to getting another replacement which I will keep until I buy a new totally different phone. My impression is that it's not like buying a bad toaster. They don't refund your money and let you get whatever you want for the same price! My question is this: Does Verizon ever just replace a phone that has had problems, with a totally different model? I have made as much of a stink as I can muster towards that end, but I am wondering if anyone out there has actually been able to pull that off?
Thank you for any feedback ,comments or stories!

amysue, We defintely want you to have a reliable and working phone. Our apologies that you have had issues with the current model, the Galaxy Stellar. After reviewing information about the overall function of the phone, it does not appear that Samsung has recalled the device or stated that all Stellar devices are defective, with that being said, the warranty would still only cover the same make and model. The only time a completely different phone is sent out is if the manufacturer deems the entire make and model overall faulty. It is common to have a few glitches and a master/factory reset, in addition to all other troubleshooting, will help resolve these issues. The Stellar is no longer made because there have been several Samsung galalxy devices launched, and this is common with any device manufacturer. Our recommendation is to take advantage of EDGE, if you are seeking a new device with low monthly payments. This gives you the chance to explore different device options without having a contract and you can EDGE up to a new device once meeting certain requirements. We hope to resolve your concerns here or by calling customer support.
sheritah_vzw
Follow us on Twitter
@VZWSupport

IWeb basic problems? Issue with galleries

Similar Messages

Maybe you are looking for