IWeb not updating site changes, even overnight!

Hi iWeb-experts,
Having problems with iWeb and have waded through the site and other forums and yet to find a solution.
Site is marccheckley.com. I successfully moved the site before MobileMe closed shop and made updates to the site a few months back.
Now I'm trying to upload further changes but iWeb has stopped functioning. I get no status that the site is being changed, as it was previously. And I know this has not happened as I have it linked to my Facebook and no "updated website" has popped up on my Wall.
I even left it overnight to update website changes and still nothing. Even clearing brower's cache etc. I tested the FTP connection all good and nothing been changed since my last updates a while back.
All 'pages' of site remain red, not updated in iWeb.
Really not sure what's happened. Nothing but probs since the closure of MobileMe, my podcast is still on hiatus due to linking problems, now website issues with iWeb.
Anyone have an idea and fix?
Always appreciated.
Marc
iWeb 3.0.4
Macbook Air (Dec 2011)
OSX Lion

If you are using the iWeb FTP to upload make sure the box next to "Update my Facebook profile when I publish this site" is unchecked. Checking this box prevents the FTP from working.
Also make sure you have no bad file names with spaces or special characters - particularly image files. This will halt the upload process.

Similar Messages

TS3899 My phone and iPad are not updating my emails even though they say they are

My phone and iPad are not updating my emails even though it say it is updated

How did you put the photos on yhour iPhone? Did you take them with the iPhone? If so and you have PS enabled on the iPhone they will be added to the PS on your iPad (as long as it's enabled also)
iPhone settings.
OT

IWeb not updating web site.

iWeb started out working okay. I kept a blog and updated it. Then I went on a trip. Even though I had wireless internet the whole time, updating kept failing. No error message, but the update clock would stop after being about one-quarter filled. When I came home, there was no difference.
Although this started months ago (before the whole .Mac to MobileMe changeover), I do believe my recent inability to update my web site is related to it. The reason is that although I can access the last updated version of my web site at "web.me.com/myaccountname", when I go to my current iDisk and open the "sites" folder, it's empty!
Is it possible that my account has not yet been changed over to MobileMe yet? I have already installed all OS updates, including the MobileMe update. My account logs in fine.
Any ideas?????

Hey maybe you need to replace only the page that was updated, do not change all the published site, try I just did it and it work I have change a page and a file to be downloaded from the web site, now I can see the changes live on the web. this is what I wrote to others.
Hey I have found not a solution but a way to publish without iWeb, Just did it and I have seen the changes on the web site. If you guys want to try:
I have published my updated web site to a folder on my desktop. then open iDisk from the web (where my web sites files are stored for everyone else to see) then open both windows side by side and only replace the files of the updated pages from the desktop folder to the iDisk folder, there is always a file and a folder with the same name. I just replace them, I then checked on the web and Woalah! changes were made. Well... it did work for now without iWeb, not sure if is the right thing to do but if you are brave enough to follow this go ahead and go to bed as I will until the bug is fixed (hopefully tomorrow) then we can go back to normal. Hope is clear and it help! Rog

Changes in nav bar are seen in iweb not on site

I had to change the name of the home folder (apparently vertical lines are not allowed). I changed it to "Home" and the changes took effect in iweb. The changes are not occurring on the live web page. The original HOme page folder name remains. The links from two other pages back to it do not work. WHY in the world will the nav info not update?????? I republished the site to a folder (many times to keep trying to make it work) and re-uploaded files to internet (many times). This is extremely frustrating. I've already spent hours finding a work-around to another problem with this program (regarding splitting up multiple sites since iWeb won't let you publish them). Does anything in iWeb actually work?
Thanks for your help.

trishaduck wrote:
I had to change the name of the home folder (apparently vertical lines are not allowed). I changed it to "Home" and the changes took effect in iweb. The changes are not occurring on the live web page. The original HOme page folder name remains. The links from two other pages back to it do not work. WHY in the world will the nav info not update?????? I republished the site to a folder (many times to keep trying to make it work)
If it's not looking right in the local folder, it will likely not look good when you update it at your website.
and re-uploaded files to internet (many times). This is extremely frustrating. I've already spent hours finding a work-around to another problem with this program (regarding splitting up multiple sites since iWeb won't let you publish them). Does anything in iWeb actually work?
Thanks for your help.
Best would be to post the url to your website so we can take a look.
Phil

Iweb not updating changes since moved to godaddy

Today I switched from mobileme to godaddy and everything worked fine. Then I cancelled the mobileme account. Now when I make changes in iweb and save to a folder, the changes are not being saved in the folder. (I'm trying to change my contact info & delete my email address). The edited page appears changed in iweb, but when I look in the folder it created, the email address is still there. This is the process I'm using:
1. Make changes in iweb
2. Save changes
3. publish to folder in iweb (on desktop)
4. Using Fetch to upload to godaddy server.
I get no error messages with iweb, Fetch or Godaddy. (In iweb site inspector, I changed site name to http://www.babysmithsite.com
url contact page: http://www.babysmithsite.com/Contact.html
Any ideas?

Sorry I wasnt clear about this. What I was trying to accomplish was to develop a site that only family members could access (with user name and password) and that the bots couldnt sniff my email address.
After everything was working on godaddy, I decided to change the email address on the site from my PERSONAL email account to a new one I got from godaddy.([email protected])
1. Deleted the old email address from iweb. Added the new one ([email protected])
2. Made new folder (site2) and uploaded that via Fetch.
That's when the problems started. The new email address didnt appear on the site. After 4-5 hours, I decided to delete all email addresses from site for security reasons (bots). Finally at 11 pm last nite, I called godaddy and the new page (suddenly) reads correctly with just a phone number and not any email addresses. So now the bots cant sniff my site, but it's still not private. Godaddy says I cant do that with them. Aargh! Mobile me was so much easier but it's 3X more expensive and I only need it for this little family website. Seems like switching wasnt such a good idea. Thanks to everyone for all the help.

IWeb not updating published status within application

I'm having a strange iWeb problem that just started up within the last day or so. When I publish any of the sites within my domain (I have seven separate "sites" that are all part of the same domain file) the updates get published to my site, but the icons in iWeb do not change color back to blue. This happens whether I choose to publish changes or publish all.
Another symptom of this problem is that my published site (http://www.adamreisinger.com) does not reflect the changes online until about five minutes after iWeb gives me the dialog box that my site has been successfully updated.
The only thing I've changed on my system recently is applying the last round of software updates, including the iLife update. I've tried trashing the application preferences and the iWeb cache and re-publishing, as well as logging out and logging back into MobileMe within System Preferences.
Any help in this matter would be greatly appreciated.

Thanks for the suggestion. I tried the steps you outlined, and unfortunately the problem persists. Also, because the files were deleted from the Web folder the iDisk, iWeb is now under the impression that EVERY page has been modified, which has actually increased my publishing time.
Some other troubleshooting steps I've taken to try and narrow down this problem:
- I've tried publishing the domain from a newly created user account on the same computer (MBP running 10.6.2 and all latest updates applied)
- I've tried copying the domain file to a different computer (one that has not had the latest iLife support update applied) and publishing from there
- I've tried publishing to a different MobileMe account (a test account set up by Apple)
- I deleted an entire site from the source list in iWeb (one that, fortunately, was not needed)
After all these steps -- tried individually -- the issue persists.

Iweb not updating pdf links

I am using iWeb 3.0.2 and have made a site with many pages and links. Many of the links are to pdf pages. I have recently changed many of the pdf files - but kept the names the same. After publishing the updated site the pdf links still open the old versions of the pdf files. Other links just don't work at all - as if they are not links.
I have tested the site in Safari - after emptying the cache and Firefox.
Any ideas? Help is needed soon. This site is for my department and it is supposed to go on line before the holidays.
The site can be looked at here: http://web.me.com/wijtman/VAS/Home.html

How did you add the links to the pdf files to the page? Did you use the Inspector/Link/Hyperlink pane and use the link to file option? If so I've found that that often does not update as you're experiencing.
I suggest you do the following:
1 - Create a folder titled pdfs and put it in your iDisk/Web/Sites folder.
2 - place your pdf files in that folder.
3 - link to the files as An External Page
Click to view full size
with the following URL:
http://web.me.com/wijtman/pdfs/file_name.pdf
Now when you want to make a change to a pdf file just upload the new file to the pdfs folder on your iDisk replacing the old file. There is no change required to the web page using iWeb.
OT

Territory not updated in Account even account data satisfy Territory Rule

Hi,
I am working on territory management and am able to successfully establish relationship between Accounts & Territory. I can see the terrtories to which account is assigned under 'Territories' assignment block on Account overview screen.
But now if I create/ change any account data(which was not satisfying territory rule earlier) to match the territory rule, the territory is not updated even after running the report 'CRM_TERRMAN_PROC_REL'(delta).
E.g. Suppose We a territory 'ABC' with territory Rule for all accounts as- postal code between 20000 & 30000. and this rule is already released.
Now when i create an account with postal code 20569(or change an existiong account with some other postal code to a number between 20000 & 30000), It should be assigned to this territory ABC. But this relationship is not established at all even after report 'CRM_TERRMAN_PROC_REL' is executed.
Please suggest if need to implement any SAP Note or any configuration/customization is missing to achieve this functionalty.
Regards,
Amit

Hi Amit
Please be advised that when territory rule contains sales area attributes, ONLY sales area relationships are build up an NO accounts relationships are built.
To build up account relationship you need to use BP attributes in your rule, so please check that you have done this, and then run the report again.
Account relationship will show all accounts that fall under thisterritory and it will not consider the sales area attribute, therefore
it will not be filtered based on the sales area attribute that you mention.
Please see the online documentation:
http://help.sap.com/saphelp_crm70/helpdata/en/b9/47d63da3a64942b3ce93b94
f731c11/frameset.htm
I hope this inforamtion helps.
Best Regards
Gavin

Accruals not updated for Changed Rebate agreement when VBOF performed.

Hi Pals,
Need your assistance in solving an incident . our client has changed the valid to date of the rebate agreement on 29.04.2014 in VBO2 from 28.02.1014 to 31.12.2014, later it was observed that the rebate accruals for the blling documents generated after 28.02.104 to till date were not updated even after running the report VBOF. There are 15000 invoices after 29.04.2014 , hence it is difficult to check which invoices carries my rebate condition type.
hence pls advice on
1. how to find out the invoices for the changed agreement .
2. How to update the accruals for the invoices that were created after 28.02.2014 to till date.
An early reply would be highly appreciated.
Br
Krishna.K

Dear krishna
i tried your scenario--so after changing the validity for my Material rebate agreement type--i ran VBOF(SDBONT06)--so system has shown the updated billing doc with rebate which was not having any rebate condition earlier.
Have you tried by retrieving all the billing docs created after service render date of 28th Feb14.
Please take all the billing docs created after this date from VBRK table and you check some random billings docs whether rebate condition type is active with condition record or not.
(other wise you try with by executing condition record numbers in KONV(doc condition number--then followed by VBRK)
pl update us..
Phanikumar

IOs apps not updating after changing country

Hi all,
This has been an issue for a while that I have ignored but can no longer. I originally began using an iPhone and iPod touch several years ago in the US. 3 years ago I moved to Canada, and since then have noticed that apps purchased while I had a USA iTunes account will not longer update unless they are on my device (ie, no updates offered thorugh iTunes). Once moving to Canada and switching financial info from USA to Canada, and subsequently changing the country of my iTunes store (as I was forced to for via the required credit card for an iTunes account) the original USA apps will not update. I realize this is going to be an even bigger problems on moving back to the USA here in a few months as all my Canadian apps will no longer update. What is the solution. All apps have been purchased under the same iTunes account, the only thing that has changed is the country of the iTunes store (all apps are available in both countries also so that is not the cause).
Thank you

Not my issue. Many apps do update fine. 5 pesky ones are being difficult and refuse to update. Tried on various wifi networks with same result. Other applications do update. All the latest as far as iOS is concerned although sadly I am still using an iPad 2.
What is the same is only that a number of my applications in the App Store fail to update on my iPad 2.

I downloaded an Adobe plug in and it will not update my computer even after a restart.

I downloaded an Adobe plug in and it will not update in my computer even after a restart. Any ideas?

to do an up-date you will need the original app. Then you can up-date

Lighroom 5.4 Develop View does not update when changing sliders

Just updated to Lightroom 5.4 (using Adobe CC) on Win8. After going to "develop view" on any photo and changing the exposure or any other slider does not update the main view of the photo. It does however update the thumbnail in the film strip and the second monitor window correctly. I've tried everything I can think of:
(1) downgrading to LR 5.3 (which used to work)
(2) forcing 1:1 and standard preview regeneration
(3) uninstalling the re-installing Lightroom (both 5.3 and 5.4)
(4) Optimizing catalogue
(5) Removing the Adobe AppData folder
(6) Creating a brand new catalogue with zero photos, importing a single photo and trying to change exposure/contrast on that
None of these result in the develop view of the picture changing when I change the sliders.
Do you guys have any experience with this?

The chances of me suspecting monitor color profile causing bugs in LR was very slim. =)
So were mine, especially when only the view itself doesn't work, but all other stuff works fine. Well, I probably have really not good colour profile, luckly you can change it after the lr is launched - it won't cause the problem untill next restart (at least works for me). And hopefully once my calibrator arrives lr will work ok with its colour profiles..

Previews in Bridge CS5 not updating with changes in Photoshop CS5

The changes I make to a file in Photoshop are not updating in the same files previewed in Bridge. The Refresh button does not make a difference. Is this to do with Cache settings or some other Preferences perhaps?
How do I make my images in Bridge become accurate representations of my files being edited in Photoshop?

I am aware of the delay in writing the cache. It only took one stuffed-up rename to make sure I was aware of that in CS3 Bridge. I use many different camera bodies and have to sort the images into Date Created order to rename them. If Bridge hasn't finished reading all the EXIF data, the images will not be in the correct order and will rename out of order.
The xmp files are all created the first time I open the RAW files in ACR to do my edit. Prior to this, they don't exist, so if I see they exist, I don't need to check their creation date. This only changes if I am editing previously edited RAW files and I don't do that often. Once is usually enough when dealing with that many files.
There shouldn't be a problem with 10,000 RAW files as the cache is set to 50GB and Adobe shows this as 500,000 files. I know that is basically JPEG files. A corrupt cache is not the same thing as corrupt RAW files, and there are several copies of the RAW files anyway as a good back-up strategy requires.
Neither of my swap files/scratch pads are on RAID drives so I doubt this is the problem. I don't recall Bridge ever using more than 25% of the CPU Resources either. It's a 32-bit program anyway and probablky won't use all four cores of the Quad-core CPU...I might be wrong there, but I haven't noticed it doing so anyway.
My WPI figures were much higher when I was running a RAID0 Boot Disc, but one disc went belly-up and I decided against a RAID primary boot disc after that.
I'm sure that there are lots of people out there with lesser-spec'd computers who are not having the same problem. Equally, I'm sure that there are others out there with the same or similar problems. I'd like to hear from them about what they have done to eliminate the problem, or are we all doing work-arounds because Adobe haven't fixed a bug. I appreciate your attempts to help with this issue Curt, so don't feel that I'm simply dismissing your suggestions. I am hopeful though that someone who uses their system and CS5 in ways similar to me might have encountered and solved this issue.
Screen capture showing the Resource Monitor. Bridge going flat-out using only 7% of CPU and very little RAM. I have hardware rendering enabled.

SRM 7SC item overview screen -Tax amount is not updated on change of Zfield

Hi ,
We use z function module for tax calculation , which is updated in table BBP_FUNCTION_MAP.
Which works fine for standard fields changed.
Now if we change one of z field ( which is part of tax calculation in z FM ), tax amount is getting correctly calculated in above Z FM ( we can see in debugging), but not updated on SC UI screen.
Same will be updated if we change standard field like price , mat grp etc.
Please let me know , how we can refresh this UI for tax amount in SC.
Regards,
Nilesh

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

PS on ERP not update after changing person responsible on PPM Phase or Task

I've implemented BADI DPR_FIN_GECCO_ATTR to update additional attributes on the ERP side, such as person responsible and some of the user fields. In a normal create of the project everything works fine. When only the person responsible is updated in cProjects no update occurs on the ERP side. Everything is updated properly on the PPM side, there is no error on COCPCPR, but the person responsible field is not updated. If the person responsible is updated on the PPM side and also another field, like the long text, everything works fine. For some reason, the change of just the person responsible does not trigger a replication on the ERP side.
Has anyone come across a similar situation? Is there a way to trigger that the ERP side should be updated?

Hi Experts,
I've been able to identify the problem and need help with the solution. The problem when just the person responsible is changed on a task in PPM is that change is recognized as a change to the object CL_DPR_ENTITY_LINK. This type of change does not identify the task and insert a record in the change table for the task object. In method ON_APPLICATION_OBJECT_CHANGED of class CL_DPR_APPL_OBJECT_CHANGE_MNGR the table mt_updated_objects needs to be updated with the task if it is not already present when this type of change occurs.
My question is how can I get the task object associated with the DPR_ENTITY_LINK object to insert into that table?
Points will be rewarded for right solution.

IWeb not updating site changes, even overnight!

Similar Messages

Maybe you are looking for