Iwl3945 and kernel 2.6.30

After installing the new kernel 2.6.30, my iwl3945 wifi module wouldn't load properly. A message in dmesg said that there was an unrecognized iwl3945 parameter "hwcrypto=1".
I had to edit /etc/modprobe.d/iwl3945 so that it looked like this:
alias wlan0 iwl3945
options iwl3945 disable_hw_scan=1
instead of this
alias wlan0 iwl3945
options iwl3945 disable_hw_scan=1 hwcrypto=1
Now everything seems to work swimmingly.

james wrote:
baze wrote:hm, it works for me without that change, but i get random disconnects and have to reload the module to get a connection again.
anyone else experiencing this?
yes with
testing/kernel26 2.6.30-4,
testing/kernel26-firmware 2.6.30-1 and
core/iwlwifi-3945-ucode 15.32.2.9-1
this has happened a few times. Can be after the first few minutes or after a very long time (hours). It's hard to repoduce. I use wicd. I have a Netgear router.
i use networkmanager and a linksys router btw.

Similar Messages

[solved]wacom doesn't work after upgrade to xorg 1.6 and kernel 2.6.29

hello..
i have already posted about that in testing-forums, but since xorg 1.6 and kernel 2.6.29 have moved to extra, though i'd create a seperate topic about that.
after i have upgraded to xorg 1.6 and kernel 2.6.29 my wacom device (as built-in, not usb) on my thinkpad x41t stopped working.
before upgrade i have used xorg with hotplugging enabled. everything worked fine.
after wacom stopeed working i removed everything regarding input devices from xorg.conf -> no change
put an fdi-file for wacom -> no change
installed linuxwacom-dev -> no change
i don't really know, if it's a kernel or an xorg issue. loading wacom drivers manually still doesn't solve the problem. no warnings or errors about wacom in xorg-log or messages.log
how could i check, wether my system recognizes the device properly at all? it doesn't show up in lspci or in lsusb.
any help would be great.
Last edited by lynucs (2009-04-14 18:57:17)

well, upgraded again to xorg-server 1.6, disabled hotplugging, installed linuxwacom-dev from aur and the wacom works as allways. (had to edit xmodmap one more time, since kbd returns other keycodes than evdev does :-| ). no matter, done is done.
but intel driver returns broken graphics if i rotate screen with xrandr.
i guess there is no way around this execpt switching to the ultra-slow legacy driver?
just for comparison - glxgears fps:
intel: ~900fps
intel-legacy: ~280fps
Last edited by lynucs (2009-04-14 18:56:48)

Hard Feezing and Kernel Panics - Early 11 MBP

Hey just wondering if anyone has any insight into this...
I've been experiencing hard freezing and kernel panics on my Early 11 Macbook Pro for several months. The hard freezing only happens when I wake up my system from sleep. I'll open the lid and when it happens, within seconds, everything locks up. No spinning wheel, just frozen machine and I have to do a hard reboot. I also get random kernel panics as well.
I took it in the the Genius Bar a few weeks ago, they ran tests and said the hardware was all fine and that I should reinstall Lion after a clean format. Well I did that and still having issues. Not sure if it's being caused by a 3rd party app...or if I really do have bad hardware after all.
When they did a diagnostic they said that 'soundflower' was showing up in my kernel panic log and that I should find what that is and delete it, so I did. In my most recent and only kernel panic, shown below, I don't see any 3rd party language anywhere.
Anyone have an idea of what might be causing this?
Interval Since Last Panic Report: 534787 sec
Panics Since Last Report:          1
Tue Jul 24 00:30:37 2012
panic(cpu 4 caller 0xffffff80002c473a): Kernel trap at 0xffffff7f816eb67c, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff83a69dd370, CR3: 0x0000000040436042, CR4: 0x00000000000606e0
RAX: 0x0000000080000000, RBX: 0x00000000cccccccc, RCX: 0x00000000cccccccc, RDX: 0x00000000cccccccc
RSP: 0xffffff807f363860, RBP: 0xffffff807f363880, RSI: 0xffffff80736aa040, RDI: 0xffffff800be74600
R8: 0x0000000000000000, R9: 0x0000000000000000, R10: 0xffffff7f8191dd70, R11: 0x0000000000000002
R12: 0x000000000000000f, R13: 0xffffff800be74600, R14: 0xffffff80736aa040, R15: 0xffffff800be74600
RFL: 0x0000000000010206, RIP: 0xffffff7f816eb67c, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0xffffff83a69dd370, Error code: 0x0000000000000002, Faulting CPU: 0x4
Backtrace (CPU 4), Frame : Return Address
0xffffff807f363510 : 0xffffff8000220792
0xffffff807f363590 : 0xffffff80002c473a
0xffffff807f363740 : 0xffffff80002da0cd
0xffffff807f363760 : 0xffffff7f816eb67c
0xffffff807f363880 : 0xffffff7f816ec061
0xffffff807f3638d0 : 0xffffff7f816f76d3
0xffffff807f3638f0 : 0xffffff7f816f7b2c
0xffffff807f363910 : 0xffffff7f816d53c4
0xffffff807f363960 : 0xffffff7f816d6852
0xffffff807f3639b0 : 0xffffff7f816d3f2c
0xffffff807f363a00 : 0xffffff7f81695829
0xffffff807f363a40 : 0xffffff7f816d7d85
0xffffff807f363a90 : 0xffffff7f81698d64
0xffffff807f363b60 : 0xffffff7f81695ecb
0xffffff807f363bc0 : 0xffffff800065501e
0xffffff807f363be0 : 0xffffff80006558fa
0xffffff807f363c40 : 0xffffff800065609b
0xffffff807f363d80 : 0xffffff80002a3f08
0xffffff807f363e80 : 0xffffff8000223096
0xffffff807f363eb0 : 0xffffff80002148a9
0xffffff807f363f10 : 0xffffff800021bbd8
0xffffff807f363f70 : 0xffffff80002aef20
0xffffff807f363fb0 : 0xffffff80002daa33
      Kernel Extensions in backtrace:
         com.apple.ATIRadeonX3000(7.1.8)[BB62D2AF-725C-3D33-8009-C51F397EBB72]@0xffffff7 f8168c000->0xffffff7f81926fff
            dependency: com.apple.iokit.IOPCIFamily(2.6.8)[06C77CAA-586C-3AA7-94B7-A544F470025E]@0xffff ff7f80858000
            dependency: com.apple.iokit.IONDRVSupport(2.3.2)[D05CFB53-FB72-3613-8162-2D188DB04738]@0xff ffff7f80cff000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.2)[2D2A4A31-EB4F-3730-BE3A-76C061685FC5]@0 xffffff7f80cc7000
BSD process name corresponding to current thread: Twitter
Mac OS version:
11E53
Kernel version:
Darwin Kernel Version 11.4.0: Mon Apr 9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
Kernel UUID: A8ED611D-FB0F-3729-8392-E7A32C5E7D74
System model name: MacBookPro8,2 (Mac-94245A3940C91C80)
System uptime in nanoseconds: 1401075635774
last loaded kext at 162719058388: com.apple.filesystems.smbfs    1.7.2 (addr 0xffffff7f80791000, size 241664)
last unloaded kext at 99396494277: com.apple.driver.AppleUSBUHCI    4.4.5 (addr 0xffffff7f80ad6000, size 65536)
loaded kexts:
com.apple.filesystems.smbfs    1.7.2
com.apple.driver.AppleHWSensor    1.9.5d0
com.apple.driver.AppleMikeyHIDDriver    122
com.apple.driver.AudioAUUC    1.59
com.apple.driver.AppleUpstreamUserClient    3.5.9
com.apple.driver.AppleMCCSControl    1.0.26
com.apple.driver.AppleHDA    2.2.0f3
com.apple.driver.AppleMikeyDriver    2.2.0f3
com.apple.driver.AppleIntelHD3000Graphics    7.1.8
com.apple.driver.AGPM    100.12.42
com.apple.kext.ATIFramebuffer    7.1.8
com.apple.driver.SMCMotionSensor    3.0.2d6
com.apple.driver.AppleSMCPDRC    5.0.0d0
com.apple.iokit.IOUserEthernet    1.0.0d1
com.apple.iokit.IOBluetoothSerialManager    4.0.5f11
com.apple.driver.AppleSMCLMU    2.0.1d2
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.driver.AudioIPCDriver    1.2.2
com.apple.driver.AppleMuxControl    3.0.16
com.apple.driver.ACPI_SMC_PlatformPlugin    5.0.0d0
com.apple.ATIRadeonX3000    7.1.8
com.apple.driver.AppleLPC    1.5.8
com.apple.filesystems.autofs    3.0
com.apple.driver.AppleUSBTCButtons    225.2
com.apple.driver.BroadcomUSBBluetoothHCIController    4.0.5f11
com.apple.driver.AppleUSBTCKeyboard    225.2
com.apple.driver.AppleIRController    312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    33
com.apple.iokit.SCSITaskUserClient    3.2.0
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCISerialATAPI    2.0.3
com.apple.iokit.IOAHCIBlockStorage    2.0.3
com.apple.driver.AppleUSBHub    4.5.0
com.apple.driver.AppleSmartBatteryManager    161.0.0
com.apple.driver.AppleFWOHCI    4.8.9
com.apple.driver.AirPort.Brcm4331    530.4.20
com.apple.driver.AppleSDXC    1.2.0
com.apple.iokit.AppleBCM5701Ethernet    3.1.2b2
com.apple.driver.AppleEFINVRAM    1.5.0
com.apple.driver.AppleAHCIPort    2.3.0
com.apple.driver.AppleUSBEHCI    4.5.8
com.apple.driver.AppleACPIButtons    1.5
com.apple.driver.AppleRTC    1.5
com.apple.driver.AppleHPET    1.6
com.apple.driver.AppleSMBIOS    1.8
com.apple.driver.AppleACPIEC    1.5
com.apple.driver.AppleAPIC    1.5
com.apple.driver.AppleIntelCPUPowerManagementClient    193.0.0
com.apple.nke.applicationfirewall    3.2.30
com.apple.security.quarantine    1.3
com.apple.driver.AppleIntelCPUPowerManagement    193.0.0
com.apple.driver.DspFuncLib    2.2.0f3
com.apple.driver.AppleSMBusController    1.0.10d0
com.apple.iokit.IOSurface    80.0.2
com.apple.iokit.IOSerialFamily    10.0.5
com.apple.iokit.IOFireWireIP    2.2.4
com.apple.iokit.IOAudioFamily    1.8.6fc17
com.apple.kext.OSvKernDSPLib    1.3
com.apple.driver.AppleHDAController    2.2.0f3
com.apple.iokit.IOHDAFamily    2.2.0f3
com.apple.driver.ApplePolicyControl    3.0.16
com.apple.driver.AppleGraphicsControl    3.0.16
com.apple.driver.AppleSMC    3.1.3d8
com.apple.driver.IOPlatformPluginLegacy    5.0.0d0
com.apple.driver.AppleSMBusPCI    1.0.10d0
com.apple.driver.AppleBacklightExpert    1.0.3
com.apple.iokit.IONDRVSupport    2.3.2
com.apple.driver.IOPlatformPluginFamily    5.1.0d17
com.apple.kext.ATI6000Controller    7.1.8
com.apple.kext.ATISupport    7.1.8
com.apple.kext.triggers    1.0
com.apple.driver.AppleIntelSNBGraphicsFB    7.1.8
com.apple.iokit.IOGraphicsFamily    2.3.2
com.apple.driver.AppleThunderboltDPInAdapter    1.8.2
com.apple.driver.AppleThunderboltDPAdapterFamily    1.8.2
com.apple.driver.AppleThunderboltPCIDownAdapter    1.2.4
com.apple.driver.AppleUSBBluetoothHCIController    4.0.5f11
com.apple.iokit.IOBluetoothFamily    4.0.5f11
com.apple.driver.AppleUSBMultitouch    227.1
com.apple.iokit.IOUSBHIDDriver    4.4.5
com.apple.driver.AppleUSBMergeNub    4.5.3
com.apple.driver.AppleUSBComposite    4.5.8
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.2.0
com.apple.iokit.IOBDStorageFamily    1.6
com.apple.iokit.IODVDStorageFamily    1.7
com.apple.iokit.IOCDStorageFamily    1.7
com.apple.iokit.IOSCSIArchitectureModelFamily    3.2.0
com.apple.driver.AppleThunderboltNHI    1.5.5
com.apple.iokit.IOThunderboltFamily    2.0.0
com.apple.iokit.IOUSBUserClient    4.5.8
com.apple.iokit.IOFireWireFamily    4.4.5
com.apple.iokit.IO80211Family    420.3
com.apple.iokit.IOEthernetAVBController    1.0.1b1
com.apple.iokit.IONetworkingFamily    2.1
com.apple.iokit.IOAHCIFamily    2.0.8
com.apple.iokit.IOUSBFamily    4.5.8
com.apple.driver.AppleEFIRuntime    1.5.0
com.apple.iokit.IOHIDFamily    1.7.1
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    177.5
com.apple.kext.AppleMatch    1.0.0d1
com.apple.security.TMSafetyNet    7
com.apple.driver.DiskImages    331.6
com.apple.iokit.IOStorageFamily    1.7.1
com.apple.driver.AppleKeyStore    28.18
com.apple.driver.AppleACPIPlatform    1.5
com.apple.iokit.IOPCIFamily    2.6.8
com.apple.iokit.IOACPIFamily    1.4
Model: MacBookPro8,2, BootROM MBP81.0047.B27, 4 processors, Intel Core i7, 2.2 GHz, 4 GB, SMC 1.69f3
Graphics: AMD Radeon HD 6750M, AMD Radeon HD 6750M, PCIe, 1024 MB
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.198.4.20)
Bluetooth: Version 4.0.5f11, 2 service, 18 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: TOSHIBA MK7559GSXF, 750.16 GB
Serial ATA Device: MATSHITADVD-R   UJ-898
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfa100000 / 3
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0245, 0xfa120000 / 5
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821a, 0xfa113000 / 7
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0xfa200000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd110000 / 3

BSD process name corresponding to current thread: Twitter
Try either uninstalling Twitter or just don't use it. See if this stops the kernel panics.
Clinton

Nvidia is not working after upgrading nvidia driver and kernel

I upgraded nvidia driver and kernel. After rebooting graphic mode is not working. Here xorg.o.log
[ 281.180]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 281.181]
X.Org X Server 1.10.0.902 (1.10.1 RC 2)
Release Date: 2011-04-08
[ 281.181] X Protocol Version 11, Revision 0
[ 281.181] Build Operating System: Linux 2.6.38-ARCH i686
[ 281.181] Current Operating System: Linux localhost 2.6.38-ARCH #1 SMP PREEMPT Wed Mar 30 07:14:27 UTC 2011 i686
[ 281.181] Kernel command line: BOOT_IMAGE=/boot/vmlinuz26 root=/dev/disk/by-uuid/b766e332-2aad-4047-8562-567180150189 ro quiet
[ 281.182] Build Date: 11 April 2011 10:49:12AM
[ 281.182]
[ 281.182] Current version of pixman: 0.20.2
[ 281.182] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 281.182] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 281.183] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 14 17:11:37 2011
[ 281.183] (==) Using config file: "/etc/X11/xorg.conf"
[ 281.183] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 281.183] (==) ServerLayout "Layout0"
[ 281.183] (**) |-->Screen "Screen0" (0)
[ 281.183] (**) | |-->Monitor "Monitor0"
[ 281.184] (**) | |-->Device "Videocard0"
[ 281.184] (**) |-->Input Device "Keyboard0"
[ 281.184] (**) |-->Input Device "Mouse0"
[ 281.184] (**) Option "Xinerama" "0"
[ 281.184] (==) Automatically adding devices
[ 281.184] (==) Automatically enabling devices
[ 281.184] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 281.184] Entry deleted from font path.
[ 281.184] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 281.184] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 281.184] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 281.184] (WW) Disabling Keyboard0
[ 281.184] (WW) Disabling Mouse0
[ 281.184] (II) Loader magic: 0x822e120
[ 281.184] (II) Module ABI versions:
[ 281.184] X.Org ANSI C Emulation: 0.4
[ 281.184] X.Org Video Driver: 10.0
[ 281.184] X.Org XInput driver : 12.2
[ 281.184] X.Org Server Extension : 5.0
[ 281.185] (--) PCI:*(0:1:0:0) 10de:0322:0000:0000 rev 161, Mem @ 0xfd000000/16777216, 0xe8000000/134217728, BIOS @ 0x????????/131072
[ 281.185] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 281.185] (II) LoadModule: "extmod"
[ 281.185] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 281.185] (II) Module extmod: vendor="X.Org Foundation"
[ 281.185] compiled for 1.10.0.902, module version = 1.0.0
[ 281.185] Module class: X.Org Server Extension
[ 281.185] ABI class: X.Org Server Extension, version 5.0
[ 281.185] (II) Loading extension MIT-SCREEN-SAVER
[ 281.185] (II) Loading extension XFree86-VidModeExtension
[ 281.185] (II) Loading extension XFree86-DGA
[ 281.185] (II) Loading extension DPMS
[ 281.185] (II) Loading extension XVideo
[ 281.185] (II) Loading extension XVideo-MotionCompensation
[ 281.185] (II) Loading extension X-Resource
[ 281.185] (II) LoadModule: "dbe"
[ 281.185] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 281.185] (II) Module dbe: vendor="X.Org Foundation"
[ 281.185] compiled for 1.10.0.902, module version = 1.0.0
[ 281.185] Module class: X.Org Server Extension
[ 281.185] ABI class: X.Org Server Extension, version 5.0
[ 281.185] (II) Loading extension DOUBLE-BUFFER
[ 281.185] (II) LoadModule: "glx"
[ 281.186] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 281.216] (II) Module glx: vendor="NVIDIA Corporation"
[ 281.217] compiled for 4.0.2, module version = 1.0.0
[ 281.217] Module class: X.Org Server Extension
[ 281.217] (II) NVIDIA GLX Module 173.14.28 Wed Sep 29 10:17:05 PDT 2010
[ 281.217] (II) Loading extension GLX
[ 281.217] (II) LoadModule: "record"
[ 281.217] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 281.217] (II) Module record: vendor="X.Org Foundation"
[ 281.217] compiled for 1.10.0.902, module version = 1.13.0
[ 281.217] Module class: X.Org Server Extension
[ 281.217] ABI class: X.Org Server Extension, version 5.0
[ 281.217] (II) Loading extension RECORD
[ 281.217] (II) LoadModule: "dri"
[ 281.217] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 281.217] (II) Module dri: vendor="X.Org Foundation"
[ 281.217] compiled for 1.10.0.902, module version = 1.0.0
[ 281.217] ABI class: X.Org Server Extension, version 5.0
[ 281.217] (II) Loading extension XFree86-DRI
[ 281.217] (II) LoadModule: "dri2"
[ 281.217] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 281.218] (II) Module dri2: vendor="X.Org Foundation"
[ 281.218] compiled for 1.10.0.902, module version = 1.2.0
[ 281.218] ABI class: X.Org Server Extension, version 5.0
[ 281.218] (II) Loading extension DRI2
[ 281.218] (II) LoadModule: "nvidia"
[ 281.218] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 281.218] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 281.218] compiled for 4.0.2, module version = 1.0.0
[ 281.218] Module class: X.Org Video Driver
[ 281.218] ================ WARNING WARNING WARNING WARNING ================
[ 281.219] This server has a video driver ABI version of 10.0 that is not
supported by this NVIDIA driver. Please check
http://www.nvidia.com/ for driver updates or downgrade to an X
server with a supported driver ABI.
[ 281.219] =================================================================
[ 281.219] (II) NVIDIA dlloader X Driver 173.14.28 Wed Sep 29 09:55:18 PDT 2010
[ 281.219] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 281.219] (--) using VT number 7
[ 281.222] (II) Loading sub module "fb"
[ 281.222] (II) LoadModule: "fb"
[ 281.222] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 281.222] (II) Module fb: vendor="X.Org Foundation"
[ 281.222] compiled for 1.10.0.902, module version = 1.0.0
[ 281.222] ABI class: X.Org ANSI C Emulation, version 0.4
[ 281.222] (II) Loading sub module "wfb"
[ 281.222] (II) LoadModule: "wfb"
[ 281.222] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 281.223] (II) Module wfb: vendor="X.Org Foundation"
[ 281.223] compiled for 1.10.0.902, module version = 1.0.0
[ 281.223] ABI class: X.Org ANSI C Emulation, version 0.4
[ 281.223] (II) Loading sub module "ramdac"
[ 281.223] (II) LoadModule: "ramdac"
[ 281.223] (II) Module "ramdac" already built-in
[ 281.223] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 281.226] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 281.226] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 281.226] (II) UnloadModule: "nvidia"
[ 281.226] (II) Unloading nvidia
[ 281.226] (II) UnloadModule: "wfb"
[ 281.226] (II) Unloading wfb
[ 281.226] (II) UnloadModule: "fb"
[ 281.226] (II) Unloading fb
[ 281.226] (EE) Screen(s) found, but none have a usable configuration.
[ 281.226]
Fatal server error:
[ 281.226] no screens found
[ 281.226]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 281.226] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 281.226]

bilgee0629 wrote:
Arjann wrote:
I think the new xorg-server is the problem as it isn't supported by this nvidia driver yet.
You could try to install the nouveau driver until nvidia comes with a new version of the 173 branch that supports xorg-server 1.10, see: https://wiki.archlinux.org/index.php/Nouveau for information. As lower-grade options, you might also consider xf86-video-nv and xf86-video-vesa.
Should i uninstall nvidia driver, then install it?
I think thats the easy way yes, else you have to blacklist the nvidia kernel module.. check the wiki link of nouveau for details.

Mac freezing and kernel panics

Please help if anyone can. I'm not much of a computer expert.
I apologize in advance if I'm not asking this question in the right forum or topic- I haven't ever posted before today.
I have a PowerMac G5 dual 2 GHz processor machine running 10.4.9. Lately I have had problems with freezing and kernel panics, especially at startup or soon after startup.
I have 1 GB RAM, 150 GB hard drive with 117 GB free space. I have no peripheral devices hooked to my computer- just an Apple USB mouse and keyboard that came with my computer.
Panics occur at startup usually, and require a restart using the power button.
Sometimes the system profiler shows that I have only 1 CPU.
I've run all the Apple hardware diagnostic stuff, Disk Utility, Disk Warrior, etc, and it comes up clean- no problems. I've run fsck -fy, and I've done a full erase and reinstall, then update to 10.4.9. Problem persists.
Sometimes I don't get the startup sound, and then everything freezes.
Sometimes it freezes on the blue screen and shows the prohibitory sign.
Sometimes when it freezes, the fans go wild and just keep increasing in speed until I force restart.
Recent kernel panic log reads as follows:
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000070000200 PC=0x000000000003FE3C
Latest crash info for cpu 0:
Exception state (sv=0x303BE280)
PC=0x0003FE3C; MSR=0x00009030; DAR=0x70000200; DSISR=0x00200000; LR=0x0003FE24; R1=0x17903470; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x020B9E40 0x0002BC34 0x002FE1CC 0x002FE3E4 0x002D64D4 0x002D5DD0
0x00502ED0 0x00500E00 0x004FFE98 0x0010916C 0x000D601C 0x000FE6C4 0x000DBF0C 0x000DC74C
0x0022D248 0x000FDEE0 0x002A5F94 0x00089D0C 0x00061340 0x00063258 0x000A84F0 0x000AB980
backtrace terminated - frame not mapped or invalid: 0xF0080DE0
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.IOStorageFamily(1.5)@0x4ee000
Proceeding back via exception chain:
Exception state (sv=0x303BE280)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x2FA43C80)
PC=0x00044398; MSR=0x4000F030; DAR=0x01597000; DSISR=0x40000000; LR=0x0001670C; R1=0xF0080DE0; XCP=0x00000010 (0x400 - Inst access)
Kernel version:
Darwin Kernel Version 8.9.0: Thu Feb 22 20:54:07 PST 2007; root:xnu-792.17.14~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x000952D8 0x000957F0 0x00026898 0x000A8004 0x000AB980
Proceeding back via exception chain:
Exception state (sv=0x303BE280)
PC=0x0003FE3C; MSR=0x00009030; DAR=0x70000200; DSISR=0x00200000; LR=0x0003FE24; R1=0x17903470; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x020B9E40 0x0002BC34 0x002FE1CC 0x002FE3E4 0x002D64D4 0x002D5DD0
0x00502ED0 0x00500E00 0x004FFE98 0x0010916C 0x000D601C 0x000FE6C4 0x000DBF0C 0x000DC74C
0x0022D248 0x000FDEE0 0x002A5F94 0x00089D0C 0x00061340 0x00063258 0x000A84F0 0x000AB980
backtrace terminated - frame not mapped or invalid: 0xF0080DE0
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.IOStorageFamily(1.5)@0x4ee000
Exception state (sv=0x2FA43C80)
PC=0x00044398; MSR=0x4000F030; DAR=0x01597000; DSISR=0x40000000; LR=0x0001670C; R1=0xF0080DE0; XCP=0x00000010 (0x400 - Inst access)
Kernel version:
Darwin Kernel Version 8.9.0: Thu Feb 22 20:54:07 PST 2007; root:xnu-792.17.14~1/RELEASE_PPC
Model: PowerMac7,3, BootROM 5.1.8f7, 2 processors, PowerPC G5 (2.2), 2 GHz, 1 GB
Graphics: GeForce FX 5200, GeForce FX 5200, AGP, 64 MB
Memory Module: DIMM0/J11, 512 MB, DDR SDRAM, PC3200U-30330
Memory Module: DIMM1/J12, 512 MB, DDR SDRAM, PC3200U-30330
Modem: Jump, V.92, Version 1.0
Network Service: Built-in Ethernet, Ethernet, en0
Serial ATA Device: ST3160023AS, 149.05 GB
Parallel ATA Device: PIONEER DVD-RW DVR-107D
USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
USB Device: Apple Optical USB Mouse, Logitech, Up to 1.5 Mb/sec, 100 mA
USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mA
USB Device: Hub, Up to 12 Mb/sec, 500 mA
USB Device: Studio Display, Up to 1.5 Mb/sec, 500 mA
I don't know enough to be able to interpret this.
Can anyone help.
Thank you very much.
PowerMac G5 Mac OS X (10.4.9)

Based on that info, it sounds like either the optical or hard drive is beginning to go bad and perhaps the CPU on the logicboard. The fact it mentions iostorage, that typically deals with the storage devices on the computer. The fact that the CPU disappears is not good. Backup your data and try to replace the hard drive. See my FAQ* on backing up:
http://www.macmaps.com/backup.html
A G5 takes SATA hard drives, and won't work with the Parallel ATA drives. SATA drives take the connectors shown here:
http://en.wikipedia.org/wiki/Serial_ATA
The drive may still be under warranty even if the computer is not. Look on the sticky label on the outside of the drive.
* Links to my pages may give me compensation.

HT201457 I have a mid 2011 iMac and have installed windows 8.1 on it I costantly get system thread not handled and kernel security check failure and the Mac restarts

I Have a mid 2011 iMac with windows 8.1 on it and constantly get system thread exception not handled and kernel security check failur

I Have a mid 2011 iMac with windows 8.1 on it and constantly get system thread exception not handled and kernel security check failur

Temp and kernel panic relation?

Is there a relationship between temperature and kernel panic?
I've spent the day restarting the computer trying everything I've found at apple discussions and support to fix the nonstop kernel panic restart requests.
After I Left the thing off for an hour - I gave up after my husband said my ranting caused Ga Tech to lose the Gator Bowl- I was able to get almost through the OS reinstall, which was about step number 45 in my restarts for the day.
so is this a temp problem? Is this chance or related to the cool down? Cannot wait for tomorrow to talk to someone at apple!

After you talk to them be sure to post back ...it may very well be related and if so indicates a hardware issue - meaning you may have to send it in for repairs.
When you mention it's a week old then I'm assuming it's a Core2Duo and not just a refurbished orig. Macbook.

Mismatch of version of external and kernel dp lib

Hello All
i'm trying to uppgrade a was abap kernel 7.00 from version 133 to 16 on db2 udb database.
I use the files:
SAP Kernel 700 64-Bit, Unicode, AIX64bit - FOR ECC60 Landscape:
SAPEXEDB_146-20000977.SAR
SAPEXE_146-20000978.SAR
lib_dbsl_156-20000977.sar
dscdb6up_2-20000977.sar
R3ldctl_17-20000977.SAR
R3load_86-20000977.SAR
R3szchk_15-20000977.SAR
dw_160-20000978.sar
librfc_34-20000978.sar
R3trans_159-20000978.SAR
tp_157-20000978.sar
But the dispatcher is failing down during the sapstart with the
following error message:
"kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 1196054) [dpxxdisp.c 1239]
shared lib "dw_xml.so" version 133 successfully loaded
shared lib "dw_xtc.so" version 133 successfully loaded
shared lib "dw_stl.so" version 133 successfully loaded
shared lib "dw_gui.so" version 133 successfully loaded
shared lib "dw_mdm.so" version 133 successfully loaded
DpMsgAdmin: Set patchno for this platform to 133
Release check o.K.
ERROR => gateway (pid 1495260) died [dpxxdisp.c 15566]
DpGwCheck: appc_adm.stat = 2
DP_FATAL_ERROR => Gateway could not be started - I better exit now
LOCATION SAP-Gateway on host uedcb410 / sapgw00
ERROR dp lib version mismatch, please check installation
TIME Thu May 22 07:26:51 2008
RELEASE 700
COMPONENT DP
VERSION 239000
RC -9999
MODULE dpxxtool2.c
LINE 688
DETAIL version of external and kernel dp lib mismatch (ext lib
version is 239000 / kernel lib version is 232000)"
but the files dw*.so doesn't exist on our server . We have the files
dw*.o as it's needed by the disp+work.
(uedcb410:dc2adm 47> ldd disp+work
disp+work needs:
/usr/sap/DC2/SYS/exe/run/dw_gui.o
/usr/sap/DC2/SYS/exe/run/dw_xml.o
/usr/sap/DC2/SYS/exe/run/dw_xtc.o
/usr/sap/DC2/SYS/exe/run/dw_mdm.o
/usr/sap/DC2/SYS/exe/run/libregex.o
/usr/sap/DC2/SYS/exe/run/dw_stl.o
/usr/lib/libwlm.a(shr_64.o)
/usr/lib/libC.a(shr_64.o)
/usr/lib/libC.a(shr2_64.o)
/usr/lib/libC.a(ansi_64.o)
/usr/lib/libpthreads.a(shr_xpg5_64.o)
/usr/lib/libc.a(shr_64.o)
/usr/lib/libpthread.a(shr_xpg5_64.o)
/usr/lib/libC.a(shr3_64.o)
/unix
/usr/lib/libC.a(ansicore_64.o)
/usr/lib/libc_r.a(shr_64.o)
/usr/lib/libC.a(shrcore_64.o)
/usr/lib/libcrypt.a(shr_64.o)
uedcb410:dc2adm 51> disp+work -V |more
disp+work information
kernel release 700
kernel make variant 700_REL
DBMS client library DB6_81
DBSL shared library version 700.08
compiled on AIX 2 5 005DD9CD4C00
compiled for 64 BIT
compilation mode UNICODE
compile time May 13 2008 21:18:59
update level 0
patch number 160
source id 0.160
We have a mismatch of version of external and kernel dp lib (ext lib
version is 239000 / kernel lib version is 232000)"
Do i need to update other .sar files from sapnet ?
Did somebody have the same error ?
Thanks in advance .
Best Regards.

We had this same issue today and folks that are not familiar with sapcpe can really be at a loss on this error, so I'm updating some of these older threads for clarification.
When sapcpe is active, you actually have two copies of the SAP kernel on your Unix file system:
/sapmnt/SID/exe - Which is probably where you update your kernel (this version was at 201)
(aka: /usr/sap/SID/SYS/exe/run)
/usr/sap/SID/DVEBMGS##/exe - A location many don't know about (this version was at 133)
Typically, sapcpe keeps these two locations identical and there are no mismatch errors but if anything happens to your configuration, the next time you update your kernel in /sapmnt/SID/exe, the replication does not occur and the mismatch happens as seen in (dev_disp or dev_disp.new):
***LOG Q00=> DpSapEnvInit, DPStart (18 22336) [dpxxdisp.c   1283]
DwSLCheckVersion: shared library version mismatch:
        shared lib "dw_xml.sl" version 133 <-> kernel version 201
        shared lib "dw_xtc.sl" version 133 <-> kernel version 201
        shared lib "dw_stl.sl" version 133 <-> kernel version 201
        shared lib "dw_gui.sl" version 133 <-> kernel version 201
        shared lib "dw_mdm.sl" version 133 <-> kernel version 201
This is made even more confusing because if you do an "ldd /sapmnt/SID/exe/disp+work" the results will tell you that it's reading those files from where you just patched your kernel. That ldd is incorrect, however. If the two copies of the kernel are not in sync, some files will indeed be loaded from /usr/sap/SID/DVEBMGS##/exe which will not match the other files that are loading from /sapmnt/SID/exe and you'll have the mismatch error.
Short Term: You can delete the contents in /usr/sap/SID/DVEBMGS##/exe and then everything is loaded from /sapmnt/SID/exe.
Long Term: Correct the configuration of sapcpe so that it keeps everything in sync and you don't have dualing kernels. (See note 1104735)

X server won't start after recent catalyst-test and kernel upgrade

Hi,
after recent upgrade of catalyst-test (13.2) and kernel (3.7.5), my x server won't start with this log (WW) and (EE) only:
[ 114.989] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 116.077] (WW) Falling back to old probe method for fglrx
[ 116.093] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 116.101] (EE) fglrx(0): DAL initialization failed!
[ 116.101] (EE) fglrx(0): Display Infrastructure Failed
[ 116.101] (EE) fglrx(0): PreInit failed
[ 116.212] (EE) Screen(s) found, but none have a usable configuration.
[ 116.212]
Fatal server error:
[ 116.212] no screens found
[ 116.212] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 116.212] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 116.212] (EE)
[ 116.515] Server terminated with error (1). Closing log file.
My card is mobility radeon hd 5700, I'm running on x86_64 system. I'm using aticonfig generated xorg.conf. I will provide any other information if needed.
I've tried:
- to downgrade to catalyst 12.8 and xorg 1.12 (screen just freezes after trying to get to X, only poweroff button works (system catches the signal and shuts down softly - no errors in Xorg.0.log))
- to use catalyst-total 13.1 / catalyst-generator 13.1 (Xorg.0.log says something about *not* compatible module - i can try it again and give you the whole log, it is probably another problem)
- to use open-source drivers (poor performance, overheating)
- to check nomodeset option (present at all kernel images in generated grub.cfg)
Unfortunately, I could not find any similar issue solved in past few days...

Downgrading kernel to 3.7.4 actually worked for catalyst 13.1. Anyone knows what could be wrong for linux 3.7.5?
Edit: catalyst-test 13.2 beta works with linux 3.7.4.
Last edited by sirkubador (2013-02-05 14:24:44)

Extreme heating, full noise fan and kernel 150% cpu

My MBA is protected by Apple care and always had this heating problem.
Specially in the summer I have extreme heating problems, and kernel 150% of cpu slow down the computer irreparably, fan is at full throttle 6200 rpm and heating reached 85 degrees Celsius.
I have upgraded all the software, i read all the thread here, I have called the Apple customer care but i NEVER found a solution to this big problem.
Does anyone can help me to address the situation?
Thanks!

No, the cause and effect is opposite
It's not happening on mine. Here is my 1st generation 1.6Ghz MacBook Air w/Snow Leopard running a YouTube Flash video, Hardware Monitor and System Load maxed out at 100% for over 10 minutes.
http://macosg.co.uk/grabs/61071d8d0effa93c4816163b707cefc4.jpg
As you can see, the kernel task is only 3.0, CPU core temps are about 68C and the CPU clock frequency has not lowered. I might also add there is a Speck SeeThru case attached to the computer.
I suggest trying the same test. If your CPU core temps get considerably higher and kernel tasks rises at the same rate, I would say you have a cooling issue--possibly with the thermal module. The CPU/GPU may need more grease.
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Macsimum News Associate Editor  Creator of 'Mac611 - Mobile Mac Support'

CrashPlan and Kernel Panics

Ever since I updated to 10.7.4 I have been having problems with CrashPlan 3.2 and kernel panics. I use CrashPlan on a MacMini 3,1 w/ 2 GHz Core 2 Duo processor and 8 GB of memory. I have several external drives that contain a large collection of photos and home movies connected to the system. There is also a large external disk that I use as a local CrashPlan backup of other computers on my home lan. The system serves mostly as a backup and file server. There are a total of over 1 million files and over 1.3 TB of data that is backed up from this computer.
After the 10.7.4 upgrade I started getting regular kernel panics when the system was running only CrashPlan. The crash report usually indicated that java was the active process, pointing to CrashPlan as the culprit. To verify that 10.7.4 was the culprit I did clean installs of 10.7.3 and 10.7.4 on an external disk, installed CrashPlan on each of them, and alternately booted from them. I was able to run 10.7.3 for long periods of time (days/months) without crashes while 10.7.4 resulted in a crash, usually within an hour of enabling CrashPlan but never more than a day or so. The crashes seemed to correspond to CrashPlan having high levels of activity. I verified the file systems of all the external drives. In August I finally got around to updating to ML, and by then 10.8.1 was out. I did a clean install on an external drive, installed CrashPlan, crossed my fingers, and, to my disappointement, ..., crashes continued. It may just be my imagination, but I would say if anything the crashes happened sooner.
I had a several month running discussion with CrashPlan support, which by the way was very responsive and gave good suggestions. I tried many things including 32 bit Java instead of 64 bit. All of this was to no avail until this past week. It was suggested that I increase the limit on the memory. Instructions fro doing this are to edit /Library/LaunchDaemons/com.crashplan.engine.plist (need root permissions to do this), search for the line that contains -Xmx512m and increase 512 to something larger. It was suggested that I start with 1024, but since I have a lot of memory on the system I used 2048. Of course CrashPlan has to be stopped and restarted for this to take effect.
Perhaps I am being premature in writing this post, but the backup has been running for over 12 hours and seems to be working fine. I noticed that the java process is using 870 MB of real and 1 GB of virtual memory. So, this could explain why CrashPlan had trouble when it was limited to 512 MB of memory. I do not know why this was not a problem under 10.7.3. I did notice under 10.7.3 that CrashPlan reported using 650 MB of real memory for the same backup set. So, for some reason it uses more under 10.8.1. It may also be that 10.7.4 and 10.8.1 have stronger memory protection, but I am not sure. I am posting this information in the hopes that it will benefit someone else having similar problems.

Start with http://docs.info.apple.com/article.html?artnum=106417
AFAICTL, these are the fonts that should be in /System/Library/Fonts/:
Apple LiGothic Medium.dfont
AppleGothic.dfont
AquaKanaBold.otf
AquaKanaRegular.otf
Courier.dfont
fonts.cache-1
Geeza Pro Bold.ttf
Geeza Pro.ttf
Geneva.dfont
Hei.dfont
HelveLTMM
Helvetica LT MM
Helvetica.dfont
Keyboard.dfont
LastResort.dfont
LucidaGrande.dfont
Monaco.dfont
Osaka.dfont
OsakaMono.dfont
Symbol.dfont
Times LT MM
Times.dfont
TimesLTMM
ZapfDingbats.dfont
ヒラギノ丸ゴ Pro W4.otf
ヒラギノ明朝 Pro W3.otf
ヒラギノ明朝 Pro W6.otf
ヒラギノ角ゴ Pro W3.otf
ヒラギノ角ゴ Pro W6.otf
ヒラギノ角ゴ Std W8.otf
儷黑 Pro.ttf
华文细黑.ttf
华文黑体.ttf

Known issues with CUDA 5.0.17 and 5.0.24 driver (including crashes and kernel panics) on Mac OSX

We have recently learned of some issues with the new CUDA drivers from Nvidia that cause crashes and kernel panics in some circumstances, including when switching between applications that use the GPU.
See this page for details.

You are experiencing a page fault (reference to an area outside of what is owned by the software in question) in the AirPort driver, in a Mac OS X kernel that does not have obvious third-party modifications to it.
This should not be happening. Your Mac OS X image may be Bad.
If you do not already have a Trusted Backup, that should be your Top Priority.
If this is a new MacBook, and it is within the first 90 days of ownership, contact telephone support and ask them to help you. They will likely suggest a re-Install, right over the Mac OS X you have in place now. This is intended to do no damage, but you should always have a Backup.

Known issues with CUDA 5.0.17 driver (including crashes and kernel panics) on Mac OSX

We have recently learned of some issues with the new CUDA drivers from Nvidia that cause crashes and kernel panics in some circumstances, including when switching between applications that use the GPU.
See this page for details.

Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the third-party developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
Here are some general guidelines. Suppose you want to remove something called “BrickYourMac.” First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickyourmac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, email the developer. While you're waiting for a response, download BrickYourMac.dmg and open it. There may be an application in there such as “Uninstall BrickYourMac.” If not, open “BrickYourMac.pkg” and look for an Uninstall button.
If you can’t remove software in any other way, you’ll have to erase your boot volume and perform a clean reinstallation of OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" that purport to remove software.

Lots of hard locks and kernel crashes/oops ["SOLVED"-bad motherboard]

I have been experiencing a lot of hard locks and kernel crashes/oops(es?) lately. This computer has always had random freezes in both WinXP and Linux (various distributions -- including live cds).
Here is my latest crash (from dmesg):
PCI: setting IRQ 12 as level-triggered
PCI: Found IRQ 12 for device 0000:02:05.0
Bad pte = dfbdf272, process = ???, vm_flags = 3f3f, vaddr = b7e6d0ac
Pid: 1470, comm: load-modules.sh Not tainted 2.6.25-ARCH #1
[<c016e775>] handle_mm_fault+0x2c5/0x850
[<c011d0c9>] do_page_fault+0x2a9/0x790
[<c014169d>] hrtimer_start+0xdd/0x1e0
[<c0125a16>] hrtick_set+0xc6/0x140
[<c03053ef>] schedule+0x3af/0x850
[<c01437e5>] getnstimeofday+0x35/0xe0
[<c01419e8>] ktime_get+0x18/0x40
[<c0305a76>] preempt_schedule+0x56/0x70
[<c012386f>] wake_up_new_task+0x8f/0xd0
[<c0128643>] do_fork+0xd3/0x2b0
[<c011ce20>] do_page_fault+0x0/0x790
[<c0307d52>] error_code+0x72/0x78
[<c0300000>] cpu_init+0x220/0x29a
=======================
VM: killing process load-modules.sh
lshwd output:
00:00.0 Class 0600: Intel Corp.|82865G [Springdale-G] Chipset Host Bridge (intel-agp)
00:01.0 Class 0604: Intel Corp.|82865G/PE/P Processor to AGP Controller (unknown)
00:1d.0 Class 0c03: Intel Corp.|USB Controller (uhci_hcd)
00:1d.1 Class 0c03: Intel Corp.|USB Controller (uhci_hcd)
00:1d.2 Class 0c03: Intel Corp.|USB Controller (uhci_hcd)
00:1d.3 Class 0c03: Intel Corp.|82801EB USB EHCI Controller #2 (uhci_hcd)
00:1d.7 Class 0c03: Intel Corp.|USB Enhanced Controller (ehci-hcd)
00:1e.0 Class 0604: Intel Corp.|82820 815e (Camino 2) Chipset PCI (hw_random)
00:1f.0 Class 0601: Intel Corp.|82801EB ISA Bridge (LPC) (i810-tco)
00:1f.1 Class 0101: Intel Corp.|82801EB ICH5 IDE (ata_piix)
00:1f.2 Class 0101: Intel Corp.|82801EB ICH5 IDE (SATA) (ata_piix)
00:1f.3 Class 0c05: Intel Corp.|82801EB SMBus (i2c-i801)
01:00.0 Class 0300: nVidia Corp.|NV18 GeForce4 MX440 AGP 8x (nv)
02:05.0 Class 0401: Avance Logic Inc.|ALS4000 Audio Chipset (snd-als4000)
02:07.0 Class 0200: D-Link System Inc.|DFE 530 TX+ Fast Ethernet Adapter (8139too)
02:0a.0 Class 0c03: VIA Technologies Inc.|VT82C586B USB (uhci_hcd)
02:0a.1 Class 0c03: VIA Technologies Inc.|VT82C586B USB (uhci_hcd)
02:0a.2 Class 0c03: VIA Technologies Inc.|VT8235 USB Enhanced Controller (ehci-hcd)
relevant entry in grub's menu.lst:
# (0) Arch Linux-ARCH
title Arch Linux
root (hd0,0)
kernel /boot/vmlinuz26 root=/dev/sda1 ro nosmp noapic acpi=off pci=routeirq ide-legacy
initrd /boot/kernel26.img
I added nosmp and the other parameters at the install/rescue cd's suggestion. I tried using the microcode package (I have a P4 HT) as suggested by someone in another thread.
I've found that the freezes will happen at the beginning of heavy CPU or disk usage (such as compilation or pacman db parsing). The hd is not the original one from this system (it was a hand-me-down), so I don't think that's the problem. The video card is different and the RAM is new. The only components that are still around are:
P4 HT processor (2.60 ghz)
Albatron PX865PE II
Enermax power supply
Any ideas? It also says "bad eip value" when the system has kernel crashes (especially on boot).
Last edited by mrbug (2008-06-21 03:08:35)

Latest message while mkinitcpio was running:
Linux agpgart interface v0.103
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
NVRM: loading NVIDIA Linux x86 Kernel Module 96.43.05 Tue Jan 22 19:36:58 PST 2008
BUG: unable to handle kernel paging request at 756e696c
IP: [<c018a137>] flush_old_exec+0x577/0x750
*pde = 00000000
Oops: 0000 [#1] PREEMPT SMP
Modules linked in: nvidia(P) agpgart nfnetlink_queue nfnetlink nf_conntrack_ipv4 iptable_filter ip_tables xt_state nf_conntrack xt_NFQUEUE x_tables w83627hf hwmon_vid 8139too mii i2c_i801 i2c_core pcspkr shpchp pci_hotplug sg evdev thermal processor fan button battery ac snd_als4000 gameport snd_sb_common snd_opl3_lib snd_hwdep snd_ice1724 snd_ice17xx_ak4xxx snd_ac97_codec ac97_bus snd_ak4114 snd_pt2258 snd_i2c snd_ak4xxx_adda snd_mpu401_uart snd_rawmidi snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_pcm snd_timer snd_page_alloc snd_mixer_oss snd soundcore e1000 rtc_cmos rtc_core rtc_lib ext3 jbd mbcache usbhid hid ff_memless usb_storage sr_mod cdrom sd_mod ehci_hcd uhci_hcd pata_acpi usbcore ata_piix ata_generic libata scsi_mod dock
Pid: 9173, comm: dirname Tainted: P (2.6.25-ARCH #1)
EIP: 0060:[<c018a137>] EFLAGS: 00210202 CPU: 0
EIP is at flush_old_exec+0x577/0x750
EAX: 756e696c EBX: 00000000 ECX: 00000500 EDX: df269004
ESI: de546c00 EDI: 00000000 EBP: df269080 ESP: de121da4
DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
Process dirname (pid: 9173, ti=de120000 task=de546c00 task.ti=de120000)
Stack: 00000001 de694b00 00000000 df269000 df269004 de710504 de710000 de547134
6e726964 00656d61 c018a39d de121dd4 00000003 de18f878 c035ccb5 de18f840
c01b73be 00000080 00000001 c13d8ec0 dec77000 de694b00 c016421f 00000001
Call Trace:
[<c018a39d>] kernel_read+0x3d/0x60
[<c01b73be>] load_elf_binary+0x36e/0x1aa0
[<c016421f>] get_page_from_freelist+0x2cf/0x4d0
[<c01646ce>] __alloc_pages+0x5e/0x360
[<c0175705>] anon_vma_prepare+0x85/0xe0
[<c016eabd>] handle_mm_fault+0x60d/0x850
[<c016eacb>] handle_mm_fault+0x61b/0x850
[<c0184b45>] do_sync_read+0xd5/0x120
[<c016c60d>] vm_normal_page+0x1d/0x70
[<c016c60d>] vm_normal_page+0x1d/0x70
[<c016d479>] follow_page+0x119/0x1c0
[<c016edd1>] get_user_pages+0xd1/0x2f0
[<c01b7050>] load_elf_binary+0x0/0x1aa0
[<c01898ec>] search_binary_handler+0x15c/0x290
[<c018ab9c>] do_execve+0x21c/0x250
[<c01033c6>] sys_execve+0x46/0x80
[<c01050d8>] sysenter_past_esp+0x6d/0xa5
[<c0300000>] cpu_init+0x220/0x29a
=======================
Code: c3 04 89 e8 e8 eb d6 17 00 89 5c 24 10 bb ff ff ff ff 8b 54 24 10 83 c3 01 89 df c1 e7 05 8b 02 39 38 0f 86 11 01 00 00 8b 40 08 <8b> 34 98 85 f6 74 e0 c7 04 98 00 00 00 00 89 e8 e8 a4 d9 17 00
EIP: [<c018a137>] flush_old_exec+0x577/0x750 SS:ESP 0068:de121da4
---[ end trace 255f477a12072e9b ]---
note: dirname[9173] exited with preempt_count 1
BUG: unable to handle kernel paging request at 6f732e78
IP: [<c012b737>] put_files_struct+0x37/0xb0
*pde = 00000000
Oops: 0000 [#2] PREEMPT SMP
Modules linked in: nvidia(P) agpgart nfnetlink_queue nfnetlink nf_conntrack_ipv4 iptable_filter ip_tables xt_state nf_conntrack xt_NFQUEUE x_tables w83627hf hwmon_vid 8139too mii i2c_i801 i2c_core pcspkr shpchp pci_hotplug sg evdev thermal processor fan button battery ac snd_als4000 gameport snd_sb_common snd_opl3_lib snd_hwdep snd_ice1724 snd_ice17xx_ak4xxx snd_ac97_codec ac97_bus snd_ak4114 snd_pt2258 snd_i2c snd_ak4xxx_adda snd_mpu401_uart snd_rawmidi snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_pcm snd_timer snd_page_alloc snd_mixer_oss snd soundcore e1000 rtc_cmos rtc_core rtc_lib ext3 jbd mbcache usbhid hid ff_memless usb_storage sr_mod cdrom sd_mod ehci_hcd uhci_hcd pata_acpi usbcore ata_piix ata_generic libata scsi_mod dock
Pid: 9173, comm: dirname Tainted: P D (2.6.25-ARCH #1)
EIP: 0060:[<c012b737>] EFLAGS: 00210202 CPU: 0
EIP is at put_files_struct+0x37/0xb0
EAX: 6f732e78 EBX: 00000000 ECX: c1407460 EDX: 00000303
ESI: de546c00 EDI: df399840 EBP: 00200206 ESP: de121bb8
DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
Process dirname (pid: 9173, ti=de120000 task=de546c00 task.ti=de120000)
Stack: df269000 0000000b de546c00 c035c5ec 00200206 c012ce7a c036075c de546e11
000023d5 00000001 00000000 00000001 00200206 c0308c6c c0360510 de121c00
de121d6c 00000000 c035c5ec 00200206 c0106e28 de5d5e34 00000000 1f901000
Call Trace:
[<c012ce7a>] do_exit+0x16a/0x6a0
[<c0106e28>] die+0x1b8/0x1c0
[<c011cfd1>] do_page_fault+0x1b1/0x790
[<c018cc23>] do_lookup+0xf3/0x1b0
[<c0197ff3>] __d_lookup+0x143/0x160
[<c011e6cf>] kunmap_atomic+0x3f/0xe0
[<c015e059>] file_read_actor+0xd9/0xf0
[<c0160e3b>] generic_file_aio_read+0x59b/0x630
[<c019cd83>] mntput_no_expire+0x13/0x70
[<c017ebf9>] add_partial+0x19/0x70
[<c0171309>] remove_vma+0x39/0x50
[<c017fd43>] __slab_free+0xd3/0x360
[<c017ebf9>] add_partial+0x19/0x70
[<c0189d8d>] flush_old_exec+0x1cd/0x750
[<c017fd43>] __slab_free+0xd3/0x360
[<c0171309>] remove_vma+0x39/0x50
[<c011ce20>] do_page_fault+0x0/0x790
[<c0307d52>] error_code+0x72/0x78
[<c018007b>] alloc_loc_track+0xab/0xc0
[<c018a137>] flush_old_exec+0x577/0x750
[<c018a39d>] kernel_read+0x3d/0x60
[<c01b73be>] load_elf_binary+0x36e/0x1aa0
[<c016421f>] get_page_from_freelist+0x2cf/0x4d0
[<c01646ce>] __alloc_pages+0x5e/0x360
[<c0175705>] anon_vma_prepare+0x85/0xe0
[<c016eabd>] handle_mm_fault+0x60d/0x850
[<c016eacb>] handle_mm_fault+0x61b/0x850
[<c0184b45>] do_sync_read+0xd5/0x120
[<c016c60d>] vm_normal_page+0x1d/0x70
[<c016c60d>] vm_normal_page+0x1d/0x70
[<c016d479>] follow_page+0x119/0x1c0
[<c016edd1>] get_user_pages+0xd1/0x2f0
[<c01b7050>] load_elf_binary+0x0/0x1aa0
[<c01898ec>] search_binary_handler+0x15c/0x290
[<c018ab9c>] do_execve+0x21c/0x250
[<c01033c6>] sys_execve+0x46/0x80
[<c01050d8>] sysenter_past_esp+0x6d/0xa5
[<c0300000>] cpu_init+0x220/0x29a
=======================
Code: 08 0f 94 c0 84 c0 0f 84 88 00 00 00 8b 04 24 31 db 8b 78 04 eb 09 8d b6 00 00 00 00 83 c3 01 89 d8 c1 e0 05 39 07 76 3c 8b 47 0c <8b> 34 98 85 f6 74 ea 89 dd c1 e5 07 f7 c6 01 00 00 00 74 17 89
EIP: [<c012b737>] put_files_struct+0x37/0xb0 SS:ESP 0068:de121bb8
---[ end trace 255f477a12072e9b ]---
Fixing recursive fault but reboot is needed!
BUG: scheduling while atomic: dirname/9173/0x00000002
Pid: 9173, comm: dirname Tainted: P D 2.6.25-ARCH #1
[<c030542d>] schedule+0x3ed/0x850
[<c0129763>] release_console_sem+0x1b3/0x1d0
[<c012d373>] do_exit+0x663/0x6a0
[<c0106e28>] die+0x1b8/0x1c0
[<c011cfd1>] do_page_fault+0x1b1/0x790
[<c01291d7>] __call_console_drivers+0x57/0x70
[<c01fad04>] number+0x2b4/0x2c0
[<c01fb76f>] vsnprintf+0x43f/0x790
[<c024ec7f>] vt_console_print+0x23f/0x330
[<c016fe66>] free_pgd_range+0x166/0x1e0
[<c011ce20>] do_page_fault+0x0/0x790
[<c0307d52>] error_code+0x72/0x78
[<c017007b>] sys_mincore+0xeb/0x3e0
[<c012b737>] put_files_struct+0x37/0xb0
[<c012ce7a>] do_exit+0x16a/0x6a0
[<c0106e28>] die+0x1b8/0x1c0
[<c011cfd1>] do_page_fault+0x1b1/0x790
[<c018cc23>] do_lookup+0xf3/0x1b0
[<c0197ff3>] __d_lookup+0x143/0x160
[<c011e6cf>] kunmap_atomic+0x3f/0xe0
[<c015e059>] file_read_actor+0xd9/0xf0
[<c0160e3b>] generic_file_aio_read+0x59b/0x630
[<c019cd83>] mntput_no_expire+0x13/0x70
[<c017ebf9>] add_partial+0x19/0x70
[<c0171309>] remove_vma+0x39/0x50
[<c017fd43>] __slab_free+0xd3/0x360
[<c017ebf9>] add_partial+0x19/0x70
[<c0189d8d>] flush_old_exec+0x1cd/0x750
[<c017fd43>] __slab_free+0xd3/0x360
[<c0171309>] remove_vma+0x39/0x50
[<c011ce20>] do_page_fault+0x0/0x790
[<c0307d52>] error_code+0x72/0x78
[<c018007b>] alloc_loc_track+0xab/0xc0
[<c018a137>] flush_old_exec+0x577/0x750
[<c018a39d>] kernel_read+0x3d/0x60
[<c01b73be>] load_elf_binary+0x36e/0x1aa0
[<c016421f>] get_page_from_freelist+0x2cf/0x4d0
[<c01646ce>] __alloc_pages+0x5e/0x360
[<c0175705>] anon_vma_prepare+0x85/0xe0
[<c016eabd>] handle_mm_fault+0x60d/0x850
[<c016eacb>] handle_mm_fault+0x61b/0x850
[<c0184b45>] do_sync_read+0xd5/0x120
[<c016c60d>] vm_normal_page+0x1d/0x70
[<c016c60d>] vm_normal_page+0x1d/0x70
[<c016d479>] follow_page+0x119/0x1c0
[<c016edd1>] get_user_pages+0xd1/0x2f0
[<c01b7050>] load_elf_binary+0x0/0x1aa0
[<c01898ec>] search_binary_handler+0x15c/0x290
[<c018ab9c>] do_execve+0x21c/0x250
[<c01033c6>] sys_execve+0x46/0x80
[<c01050d8>] sysenter_past_esp+0x6d/0xa5
[<c0300000>] cpu_init+0x220/0x29a
=======================

Kernel panic/crash using 2.6.36, iwl3945 and airmon-ng

Hi
I'm unable to log what really happens, I tried with strace aswell as valgrind but they don't pick it up. It happens whenever I start airmon-ng with:
airmon-ng start wlan0
I get a kernel panic without being connected to wireless, and with. Also doing it outside of X in TTY1.
Picture from my phone: http://ompldr.org/vNjNnMg
So yeah, not sure where to go from here. It works fine with 2.6.35.
Name : kernel26
Version : 2.6.36-3
URL : http://www.kernel.org
Licenses : GPL2
Groups : base
Provides : None
Depends On : coreutils linux-firmware module-init-tools mkinitcpio>=0.5.20
Optional Deps : crda: to set the correct wireless channels of your country
Required By : None
Conflicts With : None
Replaces : kernel24 kernel24-scsi kernel26-scsi alsa-driver ieee80211 hostap-driver26 pwc nforce squashfs unionfs ivtv zd1211 kvm-modules iwlwifi rt2x00-cvs
gspcav1 atl2 wlan-ng26 rt2500 nouveau-drm
Installed Size : 89576.00 K
Packager : Tobias Powalowski <[email protected]>
Architecture : i686
Build Date : Sun 31 Oct 2010 08:53:41 AM CET
Install Date : Thu 04 Nov 2010 09:13:11 PM CET
Install Reason : Explicitly installed
Install Script : Yes
Description : The Linux Kernel and modules
[michael@swamp ~]$ pacman -Qi wireless_tools
Name : wireless_tools
Version : 29-3
URL : http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html
Licenses : GPL
Groups : None
Provides : None
Depends On : glibc
Optional Deps : None
Required By : netcfg
Conflicts With : None
Replaces : None
Installed Size : 236.00 K
Packager : Tobias Powalowski <[email protected]>
Architecture : i686
Build Date : Sun 10 May 2009 09:32:27 AM CEST
Install Date : Thu 28 Oct 2010 09:03:34 PM CEST
Install Reason : Explicitly installed
Install Script : No
Description : Wireless Tools
Name : aircrack-ng
Version : 1.1-1
URL : http://www.aircrack-ng.org
Licenses : GPL2
Groups : None
Provides : None
Depends On : openssl sqlite3 iw
Optional Deps : None
Required By : None
Conflicts With : None
Replaces : None
Installed Size : 1288.00 K
Packager : Daenyth <Daenyth+Arch [at] gmail [dot] com>
Architecture : i686
Build Date : Sat 01 May 2010 05:13:24 PM CEST
Install Date : Wed 25 Aug 2010 07:16:38 PM CEST
Install Reason : Explicitly installed
Install Script : No
Description : A key cracker for the 802.11 WEP and WPA-PSK protocols

This issue has to lie with kernel 2.6.36 (and maybe lives on in 2.6.37 with the latest RC.) I had no such problems, up until I updated to 2.6.36.
I have a Realtek rt8187se wireless chipset, and I can invoke a kernel panic every single time, like so:
# pm-suspend
(wake up from suspend)
# iwlist scan
What I see is:
# iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
Kernel panic - not syncing: HwThreeWire(): CmdReg: 0XFF REIWE bits are not clear!!
Pid: 5357, comm: iwlist Tainted: G C 2.6.36-ARCH #1
The rest is a call trace, with the dreaded blinking capslock + scrolllock keys.
This only happens if I resume from suspend. If I power on the computer, but never suspend, I never suffer a kernel panic, even when I scan for wireless networks.
Bringing the wireless interface down and up, or changing it to monitor mode, has no effect either. The only common factor is resuming from suspend.
Last edited by flan_suse (2010-12-10 03:56:29)

Iwl3945 and kernel 2.6.30

Similar Messages

Maybe you are looking for