Iwl3945 failed to register network device archlinux

Hi, i just install ArchLinux on laptop dell 1420 i follow the tutorials of the official documentations.
But i hace a small problem with the wireless. My laptop have an Intel 3945 wifi card so i install teh module iwl-3945-udev, i dont add this module in rc.conf file becouse this module in now part of the kernel... but i doesnt owrk.. so i check error log and i found this:
Feb 9 21:54:24 pichirilo iwl3945: Failed to register network device (error -12)
And the rc.conf is:
# /etc/rc.conf - Main Configuration for Arch Linux
LOCALE="en_US.utf8"
HARDWARECLOCK="localtime"
USEDIRECTISA="no"
TIMEZONE="Canada/Pacific"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
MOD_AUTOLOAD="yes"
MODULES=(tg3 mac80211 snd-mixer-oss snd-pcm-oss snd-hwdep iwl3945 snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore)
USELVM="no"
HOSTNAME="pichirilo"
eth0="dhcp"
INTERFACES=(eth0,wlan0)
ROUTES=(!gateway)
DAEMONS=(syslog-ng network netfs crond alsa hal fam kdm)
i try to add the module manually but i have the same result...
any idea ???
Thanks
Last edited by dilaang (2009-02-10 05:53:43)

No luck...removed iwl3495 from rc.conf still no luck..
[root@muttai ~]# lsmod | more
Module Size Used by
i915 67208 2
drm 108768 3 i915
ndiswrapper 249600 0
joydev 14208 0
uvcvideo 62344 0
compat_ioctl32 11520 1 uvcvideo
videodev 37888 2 uvcvideo,compat_ioctl32
psmouse 57116 0
sdhci_pci 10624 0
sdhci 19588 1 sdhci_pci
btusb 15768 0
i2c_i801 12444 0
iTCO_wdt 15184 0
sg 31840 0
serio_raw 8196 0
mmc_core 54624 1 sdhci
i2c_core 26144 1 i2c_i801
iTCO_vendor_support 5636 1 iTCO_wdt
v4l1_compat 17284 2 uvcvideo,videodev
bluetooth 60836 1 btusb
video 22420 0
output 5248 1 video
intel_agp 33136 1
wmi 8896 0
dcdbas 10928 0
thermal 20896 0
processor 46648 3 thermal
fan 7304 0
button 9504 0
battery 14600 0
ac 7176 0
fuse 59584 2
evdev 13984 16
snd_seq_oss 35584 0
snd_seq_midi_event 9344 1 snd_seq_oss
snd_seq 58336 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 9364 2 snd_seq_oss,snd_seq
snd_hda_intel 531124 1
snd_hwdep 10632 1 snd_hda_intel
snd_pcm_oss 45440 0
snd_pcm 82952 2 snd_hda_intel,snd_pcm_oss
snd_timer 24720 2 snd_seq,snd_pcm
snd_page_alloc 11792 2 snd_hda_intel,snd_pcm
snd_mixer_oss 18944 1 snd_pcm_oss
snd 65096 11 snd_seq_oss,snd_seq,snd_seq_device,snd_hda_inte
l,snd_hwdep,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
soundcore 9632 1 snd
rtc_cmos 14040 0
rtc_core 21060 1 rtc_cmos
rtc_lib 4992 1 rtc_core
usbhid 41536 0
hid 49856 1 usbhid
ext3 141328 5
jbd 57000 1 ext3
mbcache 10244 1 ext3
dm_mod 62704 0
ohci1394 34612 0
ieee1394 91392 1 ohci1394
sr_mod 18884 0
iwl3945 103416 0
rfkill 13776 1 iwl3945
cdrom 39080 1 sr_mod
mac80211 182960 1 iwl3945
led_class 6280 1 iwl3945
sd_mod 29096 7
tg3 133124 0
libphy 22656 1 tg3
cfg80211 36896 2 iwl3945,mac80211
uhci_hcd 27552 0
ehci_hcd 41356 0
usbcore 160432 7 ndiswrapper,uvcvideo,btusb,usbhid,uhci_hcd,ehci_
hcd
ata_piix 27652 0
ahci 36876 6
ata_generic 8068 0
pata_acpi 7296 0
libata 176352 4 ata_piix,ahci,ata_generic,pata_acpi
scsi_mod 119256 4 sg,sr_mod,sd_mod,libata
[root@muttai ~]# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
[root@muttai ~]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:1C:23:FC:D7:1B
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:17
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:280 (280.0 b) TX bytes:280 (280.0 b)
[root@muttai ~]# modprobe -r iwl3945
[root@muttai ~]# modprobe iwl3945
[root@muttai ~]# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wmaster0 no wireless extensions.
wlan0 IEEE 802.11abg ESSID:""
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Tx-Power=0 dBm
Retry min limit:7 RTS thr:off Fragment thr=2352 B
Encryption key:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
[root@muttai ~]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:1C:23:FC:D7:1B
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:17
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:280 (280.0 b) TX bytes:280 (280.0 b)
[root@muttai ~]#

Similar Messages

ISE Failed to Create Network Device Error

I am trying to add new network device to a new out of the box ISE 3315 appliance under the Administration > Network Resources section. I was able to do this the other day but now when I try I get an error that says "Failed to create network device. System Error!
Any ideas? I tried a reboot, and Iam pretty certain I was able to do this a few days ago. Its a lab device so only I have touch it. Only other thing I can think to add is that I am running on an eval license until my regular licenses arrive. From what I see I have 81 days left on my base and advance package eval licenses.

Is there a certain amount of AAA client for that eval license?
Thanks,
Scott Fella
Sent from my iPhone

Server 2012 R2 - The system failed to register host (A or AAAA) resource records (RRs) for network adapter

We seem to be having an issue recently after introducing new Windows Server 2012 R2 servers where they fail to register DNS correctly. The Windows Firewall is off and the servers are on the same VLAN with no firewalls between them.
When I do an ipconfig /registerdns or wait 24 hours for the system to try we get the following error:
The system failed to register host (A or AAAA) resource records (RRs) for network adapter
with settings:
Adapter Name : {4A0ECF05-193F-4BEA-AA46-BEC593BA752B}
Host Name : SRV-DATA
Primary Domain Suffix : internal.local
DNS server list :
192.168.0.50, 192.168.0.42
Sent update to server : <?>
IP Address(es) :
192.168.0.99
The reason the system could not register these RRs was because the DNS server contacted refused the update request. The reasons for this might be (a) you are not allowed to update the specified DNS domain name, or (b) because the DNS server authoritative
for this name does not support the DNS dynamic update protocol.
To register the DNS host (A or AAAA) resource records using the specific DNS domain name and IP addresses for this adapter, contact your DNS server or network systems administrator.
On our DNS server we have set for the internal.local zone Secure Updates only so that looks good because it is Active Directory that should be handling this authentication to update the record I assume. Just to mention that when also doing an ipconfig /regsiterdns
the update fails within a few seconds.
Source: DNS Clients Events
Event ID: 8018
User: NETWORK SERVICE
This issue is only affecting Windows Server 2012 R2 clients and testing with Windows Server 2008 R2 clients works no issues. So is this a mis-configuration or a bug with Windows 2012 R2? I have checked all DNS settings on client / server which all look good
to me so reaching out now to see if anyone has any ideas?
Environment:
- Windows Server 2012 R2 Domain Controllers (Forest/Domain Levels 2012 R2)
- Windows Server 2012 R2 Client machines (Physical and Virtual)
- Windows Server 2008 R2 Client machines (Physical and Virtual)

The zone is configured as "Secure Only"
The PDC is the SOA for the zone
I dont have a packet capture from the DC, only the client.
The query you asked me to run is too long to paste in here, however this is the DNS zone it cannot update:
NotifyServers :
SecondaryServers : {10.2.0.3, 10.2.0.5}
AllowedDcForNsRecordsAutoCreation :
DistinguishedName : DC=internal.local,cn=MicrosoftDNS,DC=ForestDnsZones,DC=internal,DC=local
IsAutoCreated : False
IsDsIntegrated : True
IsPaused : False
IsReadOnly : False
IsReverseLookupZone : False
IsShutdown : False
ZoneName : internal.local
ZoneType : Primary
DirectoryPartitionName : ForestDnsZones.internal.local
DynamicUpdate : Secure
IsPluginEnabled : False
IsSigned : False
IsWinsEnabled : False
Notify : NoNotify
ReplicationScope : Forest
SecureSecondaries : TransferToSecureServers
ZoneFile :
PSComputerName :
CimClass : root/Microsoft/Windows/DNS:DnsServerPrimaryZone
CimInstanceProperties : {DistinguishedName, IsAutoCreated, IsDsIntegrated, IsPaused...}
CimSystemProperties : Microsoft.Management.Infrastructure.CimSystemProperties

Failed to register some new devices

Hi All,
as in subject, I cannot register some devices to a ZLM server. In
particular, these are both SLES10 SP1 and SLES10 SP2. The following is
the error I get when run 'rug sa -t zenworks https://10.0.0.1
27 Jan 2010 18:01:45 INFO ServiceManager Adding service:
https://10.0.0.1
27 Jan 2010 18:01:45 INFO WebCache Attempting to retrieve
'https://10.0.0.1/zenworks-registration/ostargets.xml' (try 1)
27 Jan 2010 18:01:45 INFO WebCache Retrieval of
'https://10.0.0.1/zenworks-registration/ostargets.xml' (try 1) failed:
Error getting response stream (The remote server returned a 407 status
code.): SecureChannelFailure
27 Jan 2010 18:01:47 INFO WebCache Attempting to retrieve
'https://10.0.0.1/zenworks-registration/ostargets.xml' (try 2)
27 Jan 2010 18:01:47 INFO WebCache Retrieval of
'https://10.0.0.1/zenworks-registration/ostargets.xml' (try 2) failed:
Error getting response stream (ReadHeaders): ServerProtocolViolation
27 Jan 2010 18:01:49 INFO WebCache Attempting to retrieve
'https://10.0.0.1/zenworks-registration/ostargets.xml' (try 3)
27 Jan 2010 18:02:23 INFO WebCache Retrieval of
'https://10.0.0.1/zenworks-registration/ostargets.xml' (try 3) failed:
Error getting response stream (ReadHeaders): ServerProtocolViolation
27 Jan 2010 18:02:25 INFO Progress Progress.Stop Message:
Download failed: (https://10.0.0.1/zenworks-registration/ostargets.xml)
Error getting response stream (ReadHeaders): ServerProtocolViolation
27 Jan 2010 18:02:25 INFO ZenService Detected target as
'sles-10-x86_64'
27 Jan 2010 18:02:25 INFO WebCache Attempting to retrieve
'https://10.0.0.1/zenworks-registration/service.xml' (try 1)
27 Jan 2010 18:02:25 INFO WebCache Retrieval of
'https://10.0.0.1/zenworks-registration/service.xml' (try 1) failed:
Error getting response stream (ReadHeaders): ServerProtocolViolation
27 Jan 2010 18:02:27 INFO WebCache Attempting to retrieve
'https://10.0.0.1/zenworks-registration/service.xml' (try 2)
27 Jan 2010 18:03:03 INFO WebCache Retrieval of
'https://10.0.0.1/zenworks-registration/service.xml' (try 2) failed:
Error getting response stream (ReadHeaders): ServerProtocolViolation
27 Jan 2010 18:03:05 INFO WebCache Attempting to retrieve
'https://10.0.0.1/zenworks-registration/service.xml' (try 3)
27 Jan 2010 18:03:05 INFO WebCache Retrieval of
'https://10.0.0.1/zenworks-registration/service.xml' (try 3) failed:
Error getting response stream (ReadHeaders): ServerProtocolViolation
27 Jan 2010 18:03:07 INFO Progress Progress.Stop Message:
Download failed: (https://10.0.0.1/zenworks-registration/service.xml)
Error getting response stream (ReadHeaders): ServerProtocolViolation
27 Jan 2010 18:03:07 INFO Progress Progress.Stop Message:
Parent failed/aborted
27 Jan 2010 18:03:07 INFO Progress Progress.Stop Message:
Parent failed/aborted
27 Jan 2010 18:03:07 INFO Progress Progress.Stop Message:
Parent failed/aborted
27 Jan 2010 18:03:08 INFO HelperProgress Source
'https://10.0.0.1' already removed.
27 Jan 2010 18:03:08 INFO Progress Progress.Stop Message:
Source 'https://10.0.0.1' already removed.
27 Jan 2010 18:03:08 INFO RPMBackend Updating status of
patches...
27 Jan 2010 18:03:09 INFO RPMBackend Finished updating patch
status
27 Jan 2010 18:03:09 WARN ZenService
Novell.Zenworks.Zmd.MANAGED_DEVICE_UNREGISTERED:
Novell.Zenworks.Zmd.MANAGED_DEVICE_UNREGISTERED
27 Jan 2010 18:03:09 INFO ServiceManager Failed to add service
'https://10.0.0.1': Download failed:
(https://10.0.0.1/zenworks-registration/service.xml) Error getting
response stream (ReadHeaders): ServerProtocolViolation
27 Jan 2010 18:03:09 INFO ZenService Failed service info
download (Failed): Download failed:
(https://10.0.0.1/zenworks-registration/service.xml) Error getting
response stream (ReadHeaders): ServerProtocolViolation
27 Jan 2010 18:03:09 INFO Progress Progress.Stop Message:
Download failed: (https://10.0.0.1/zenworks-registration/service.xml)
Error getting response stream (ReadHeaders): ServerProtocolViolation
27 Jan 2010 18:03:09 INFO Progress Progress.Stop Message:
Parent failed/aborted
27 Jan 2010 18:03:09 INFO Progress Progress.Stop Message:
Parent failed/aborted
27 Jan 2010 18:03:09 INFO Progress Progress.Stop Message:
Parent failed/aborted
Thanks,
Jan

Hi Rainer,
here the output (some part in italian)
rug ping
ZMD 7.3.1, Copyright (C) 2009 Novell, Inc.
Avviato il 27/01/2010 18.10.24 (tempo di operativit: 5 giorni, 16 ore,
33 minuti)
Dimensioni RSS: 20660
Rete connessa: S
In esecuzione su Mono 1.2.6
Destinazione sistema operativo: SUSE Linux Enterprise Server 10.2 (x86_64)
Nome del modulo | descrizione
-------------------+-------------------------------------------------
Image Agent Module | Novell ZENWorks Imaging Agent
Policy Manager | Manages policy enforcement on the device
Settings | Handles Settings refresh events.
TessModule | Tess Module
Inventory | Software and Hardware inventory module for Linux
NetworkManager | NetworkManager support
Package Management | Package Management module for Linux
RMModule | Remote Management module
ZENworks Server | SOAP methods used by a ZENworks server
Scheduled Actions | Scheduled Actions module for ZMD
XML-RPC interface | Export ZMD public interfaces over XML-RPC PC
Thanks,
Jan
On 01/27/2010 10:16 PM, brunold wrote:
>
> Jan,
>
> what zlm version are you using ?
>
> Do you have the full zlm client installed on those devices ?
> Can you post a "rug ping" of one of them ?
>
> Rainer
>
>

Carrier cannot register my device on the network

Hi,
I am new on the forum and was wondering if anyone could assist because my carrier cannot.
I had a BB 8900 Curve which i replaced yesterday with a Bold 9000 and now cannot register the device on the carrier network. Calls etc are fine, just BIS will not. My previous 8900 worked fine? I have been on the phone with the carrier the entire day and they have not been able to resolve it. All i did was change the device in the BIS website and now it is broken.
Any ideas?

Hi and Welcome to the Forums!
The BIS account is controlled by the carrier. The BIS account is assigned to one PIN and only one PIN. The carrier must resolve shifting the BIS account from the old BB PIN to the new one.
In the meantime, try these steps:
1) Register HRT
Homescreen > Options > Advanced Options > Host Routing Table > BBKey (it does not matter which line is current) > Register Now
2) Resend Service Books
KB02830 Send the service books for the BlackBerry Internet Service
3) Batt Pull Reboot
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

OS X 10.10.2 Your connection failed because the communication device is unavailable. Make sure it's connected to your computerunication device is unavailable. Make sure it's connected to your computer and try reconnecting ad try reconnecting

There is precious little information concerning this warning dialog. If I am disconnected from any network; wifi, Bluetooth, Thunderbolt Ethernet, doesn't matter, I get this error in a pop-up dialog. "Your connection failed because the communication device is unavailable. Make sure it's connected to your computer and try reconnecting" Creating a new Location under System Preferences / Network does not solve the problem. 1. What is asking to be connected? 2. How do I stop this? Running Yosemite 10.10.2 on a MBP 13"

Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback
Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
Feedback via Apple Developer

Dhclient & dhcpcd - receive_packet failed on enp0s25: Network is down

My internet literally stoped working a couple a days ago on one of my machines.
I've done everything from calling my ISP to verify any MAC time-lock restrictions in their equipment and here's where i'm at now:
[elias@ubercool ~]$ sudo dhclient -v enp0s25
[sudo] password for elias:
Internet Systems Consortium DHCP Client 4.2.5-P1
Copyright 2004-2013 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/
execve (/sbin/dhclient-script, ...): No such file or directory
Listening on LPF/enp0s25/00:14:0b:64:50:6e
Sending on LPF/enp0s25/00:14:0b:64:50:6e
Sending on Socket/fallback
DHCPDISCOVER on enp0s25 to 255.255.255.255 port 67 interval 3
receive_packet failed on enp0s25: Network is down
DHCPDISCOVER on enp0s25 to 255.255.255.255 port 67 interval 6
DHCPDISCOVER on enp0s25 to 255.255.255.255 port 67 interval 13
I've also tried spoofing the MAC to one of the machines in the house that works without any success.
[elias@ubercool ~]$ ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp0s25: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
link/ether 00:14:0b:64:50:6e brd ff:ff:ff:ff:ff:ff
3: wlp4s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DORMANT qlen 1000
link/ether 00:22:43:20:9d:58 brd ff:ff:ff:ff:ff:ff
Also tried dhcpcd without any success.
Here's my dmesg:
[ 10.489410] rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0
[ 10.489416] IR LIRC bridge handler initialized
[ 11.185706] EXT4-fs (sda3): mounting ext3 file system using the ext4 subsystem
[ 11.224691] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 11.438810] Adding 5124696k swap on /dev/sda1. Priority:-1 extents:1 across:5124696k
[ 15.206803] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.206816] Bluetooth: BNEP socket layer initialized
[ 16.318370] Bluetooth: RFCOMM TTY layer initialized
[ 16.318385] Bluetooth: RFCOMM socket layer initialized
[ 16.318387] Bluetooth: RFCOMM ver 1.11
[ 19.084559] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 19.187208] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 19.187561] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 19.208930] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[ 20.252634] NVRM: Your system is not currently configured to drive a VGA console
[ 20.252640] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 20.252643] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 20.252645] NVRM: drivers including, but not limited to, vesafb, may result in
[ 20.252647] NVRM: corruption and stability problems, and is not supported.
[ 22.311729] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 22.311764] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[ 22.494351] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 22.596799] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 22.596904] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 25.541736] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 25.541769] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[ 42.141900] fuse init (API version 7.20)
[ 54.474524] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 54.576806] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 54.576917] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 54.893736] systemd-journald[176]: Failed to set ACL on /var/log/journal/d1a47ba334a040298d78a1f559c8a6ca/user-1000.journal, ignoring: Invalid argument
[ 56.179458] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,commit=0
[ 56.190946] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 56.293456] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 56.293553] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 56.381430] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro,commit=0
[ 58.575044] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 58.575083] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[ 86.494458] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 86.596810] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 86.596915] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 89.435024] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 89.435061] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[ 90.176935] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 90.280130] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 90.280233] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 93.258398] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 93.258434] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[ 120.488329] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 120.590102] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 120.590205] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 123.491787] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 123.491839] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[ 124.184438] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 124.286808] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 124.286903] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 127.215087] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 127.215125] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[ 154.480176] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 154.583429] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 154.583549] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 157.571691] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 157.571728] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
It's such a random issue that it droped in the middle of the day with no real reason..
http://s21.postimg.org/v2aghvmav/Screen … _17_PM.png
MOD EDIT: resize big pic
Last edited by fukawi2 (2013-06-26 11:33:22)

Trilby wrote:
Torxed wrote:execve (/sbin/dhclient-script, ...): No such file or directory
There you go. What's calling that? That should resolve to /usr/bin/sbin.
What does `ls -l /sbin/dhclient-script` return? Did you complete the recent filesystem upgrade without errors.
[elias@ubercool ~]$ ls -l /sbin/dhclient-script
-rwxr-xr-x 1 root root 12295 May 31 15:48 /sbin/dhclient-script
And yes i've successfully updated the filesystem with out any errors, oddly enough this script is sticking to the guns and satying in /sbin/ (thought all scripts and what not moved to /usr/{sbin, bin} but i guess not?)
fukawi2 wrote:Please do not post large pictures
Sorry about that, i knew there was a limit but there's so much rules to keep track of so i used "common sense" and i thought my image was at least not tremendously hughe.. but i guess that depends on what sort of connection and PC you got.
jrussell wrote:
try just
systemctl start dhcpcd
Won't do any good, considering i've already tried it (read the title and description of the issue).
Last edited by Torxed (2013-06-26 20:19:07)

A connection to the deployment share could not be made - Networking device did not have a driver installed

I have a couple of HP 8200 desktops that I think might have bad nics. When I PXE boot them and start my LiteTouch, I get a Wizard error that says
A connection to the deployment share (\\mydpshare\share) could not be made. The following networking device did not have a driver installed
PCI\VEN_8086&DEV_1502&SUBSYS_1496103C&REV_04
I have that driver in MDT and it works on other HP 8200s. Looking into the Wpeinit.log, it looks like the driver loads but maybe the nic is bad:
Installing device root\kdnic X:\WINDOWS\INF\kdnic.inf succeeded
Installing device pci\ven_8086&dev_1502 X:\WINDOWS\INF\net1ic64.inf succeeded
Spent 16903ms installing network drivers
QueryAdapterStatus: no adapters found
Spent 0ms confirming network initialization; status 0x80004005
WaitForNetworkToInitialize failed; ignoring error
Has anyone seen this before?
Orange County District Attorney

Hi,
According to your description, it should be Intel NIC driver problem. I have checked HP official website, there is new NIC driver released, please access to the link below to download the NIC driver for test:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5037932&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D2%257CswItem%253Dvc_111651_1%257CswEnvOID%253D4060%257CitemLocale%253D%257CswLang%253D%257Cmode%253D4%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken
Roger Lu
TechNet Community Support

DNS failing to register

Background
all Server 2012 VMs...1 domain controller, multiple member servers. I have only one member server that is having DNS issues. The problem was first discovered while trying to gpupdate /force, which failed stating there's a lack of network connectivity
with the domain controller, event ID 1129. I looked in the event logs further and there were event ID 8020 "the system failed to register host (A AAA) resource records for network adapter with settings....", there were also events where the
time service could not sync with the DC.
From there I dropped the server from the domain, and then rejoined it without issue. It still was having the same errors. I looked in the DNS Manager on the DC, and the record with that IP address had the wrong host name. I deleted it,
and attempted to have the server register the record. I followed ipconfig /flushdns, and ipconfig /registerdns. Still having the same issues.
It is part of the domain, trust relationships seem fine. Any thoughts? I can't find anything anywhere on that event ID.

Seems like too few info to decide what is your problem. My very first guess is that there is error in VM settings. Make sure that VMs has disabled time synchronization with host. Secon problem may stem from possible port blocking (try without fw) and third
problem in VM may be caused by wrongly setting IP DNS in NIC parameters.
Also start with dcdiag to find the health of AD. Do not remember to delete DNS cache whenever you do any chnages is DNS settings.
Here are references that may help:
https://technet.microsoft.com/en-us/library/cc727335(v=ws.10).aspx
If you use DHCP from network router (which is wrong configuration):
https://support.microsoft.com/en-us/kb/2459530
HTH
Milos

How to import network devices on ISE 1.2

Hi, experts,
I'm trying to import network devices on ISE 1.2.0.899
so I downloaded the template and opened with notepad and wrote all the nessesarry information.
and I tried to upload to ISE, and it just said import failed. no reason..
does anyone know how to do it ?

Hi jiyoung
This import failed error might occur due to following reasons so please make sure that :
You are not running two import jobs of the same resource type at the same time. For example, you cannot concurrently run two import jobs to import network devices from two different import files.
More over please make sure that while configuring the network devices you are performing job from a super admin or network device admin group.
Best Regards:
Muhammad Munir
Hi, experts,
I'm trying to import network devices on ISE 1.2.0.899
so I downloaded the template and opened with notepad and wrote all the nessesarry information.
and I tried to upload to ISE, and it just said import failed. no reason..
does anyone know how to do it ?

OpenConnect VPN client suddenly failing -- Failed to open tun device

This started recently on my laptop, when trying to connect to my company's Cisco VPN it simply fails and doesn't provide much information:
Jun 28 08:01:25 winter openconnect[17279]: POST https://vpn.company.net/
Jun 28 08:01:25 winter openconnect[17279]: Attempting to connect to server X.X.X.X
Jun 28 08:01:26 winter openconnect[17279]: SSL negotiation with vpn.company.net
Jun 28 08:01:26 winter openconnect[17279]: Connected to HTTPS on vpn.company.net
Jun 28 08:01:26 winter openconnect[17279]: XML POST enabled
Jun 28 08:01:36 winter openconnect[17279]: POST https://vpn.company.net/
Jun 28 08:01:43 winter openconnect[17279]: Got CONNECT response: HTTP/1.1 200 OK
Jun 28 08:01:44 winter openconnect[17279]: CSTP connected. DPD 30, Keepalive 20
Jun 28 08:01:54 winter openconnect[17279]: Failed to open tun device: No such device
I've made sure that the kernel is configured to load the tun device:
[root@localhost log]# zgrep CONFIG_TUN /proc/config.gz
CONFIG_TUN=m
[root@localhost log]#
And beyond this, I cannot seem to find any more information on what's going on. I know that the client is actually connecting, because we use a 2-step auth service that pushes requests to my phone, and I receive the request to authorize the login. It simply cannot start the tunnel. I've checked if the tun module is actually loaded, and it is not:
[root@localhost log]# lsmod | grep -i tun
[root@localhost log]#
But as I understand it, this shouldn't matter, correct? The module should get loaded as needed by userspace applcations? I *believe* this started after I had setup an OpenVPN connection to connect to a client's VPN, but I made sure to uninstall OpenVPN (as it's not required by openconnect) and the issue still continues. OpenConnect works totally fine and connects to my company's VPN without a problem, on my desktop running Arch.
If anyone can shine some light on this I would greatly appreciate it! Thanks!
EDIT: I found a solution, though maybe someone can shine some light on why this works (and what broke in the first place). I basically insmoded the actual .ko file of the tun module:
[root@localhost net]# find /lib/modules/ -iname 'tun.ko.gz'
/lib/modules/3.15.1-1-ARCH/kernel/drivers/net/tun.ko.gz
[root@localhost net]# insmod /lib/modules/3.15.1-1-ARCH/kernel/drivers/net/tun.ko.gz
[root@localhost net]# lsmod | grep tun
tun 20931 0
[root@localhost net]#
After doing this I can connect to the VPN without issue.
Last edited by snowblind (2014-06-28 13:15:47)

Did you upgrade to a newer kernel recently without a reboot afterwards? See https://bbs.archlinux.org/viewtopic.php?id=163377 for a (perhaps) related problem and solution.

How do I get rid of "Your connection failed because the communication device is unavailable"? Pops up 4 times every time I boot my MBP.

How do I get rid of "Your connection failed because the communication device is unavailable." ? Pops up 4 or 5 times every time I log on to my MBP.

Hi there
Do you happen to use a USB modem or something like that? This could be the cause.
You could try creating a new network location to see if that fixes it (if not you can just reverse it)
1. Go to  Menu -> System Preferences
2. Then go to Network on the 3rd row
3. Make sure the padlock is unlocked (bottom left) with your admin password
4. Choose 'Automatic' next to 'Location' at the top.
5. Choose 'Edit Locations'
6. Then click the + button, and create a new one called home/test/somethingorother
7. Click Done -> Save and wait a few seconds
8. You may have to reconnect to your Wi Fi network etc.
If you have a USB modem, the above steps will most likely remove its config from the Network preferences. As I said, its reversable (just change location back to automatic)
Have fun

Solaris 10 8/07 failed to register (sconadm & GUI)

Hi,
I'm getting mad! :(
I'm not able to register my e6500 (bought used) to get the software updates.
I digged in the forum, but w/o any result.
I downloaded by hand any suggested patches, cleaned and restarted all cacao stuff but at the end I always get "failed registration!"
I can access to www.sun.com:80, cns-services.sun.com:443, getupdates1.sun.com:443, a248.e.akamai.net:443, cns-transport.sun.com:443
I also tried via GUI but w/o any success.
Here is the error on the log:
SEVERE: Error: SWUPOM register() exception: Failed to register asset with AMS. Error message is :com.sun.scn.offering.prom.AssetRegistrationException: InvalidAssetException
Aug 19, 2008 12:45:20 AM com.sun.cns.basicreg.cacao.SWUPOMCacaoAdapter registerSystem
SEVERE:
com.sun.scn.offering.swupom.SWUPOfferingInstance.register(SWUPOfferingInstance.java:370)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:585)
com.sun.jmx.mbeanserver.StandardMetaDataImpl.invoke(StandardMetaDataImpl.java:414)
javax.management.StandardMBean.invoke(StandardMBean.java:323)
com.sun.jmx.mbeanserver.DynamicMetaDataImpl.invoke(DynamicMetaDataImpl.java:213)
com.sun.jmx.mbeanserver.MetaDataImpl.invoke(MetaDataImpl.java:220)
com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:815)
com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:784)
com.sun.jdmk.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:203)
com.sun.cacao.agent.DispatchInterceptor.invoke(DispatchInterceptor.java:736)
com.sun.cacao.agent.auth.impl.AccessControlInterceptor.invoke(AccessControlInterceptor.java:618)
com.sun.jdmk.JdmkMBeanServerImpl.invoke(JdmkMBeanServerImpl.java:764)
com.sun.cacao.common.instrum.impl.InstrumDefaultForwarder.invoke(InstrumDefaultForwarder.java:106)
javax.management.remote.rmi.RMIConnectionImpl.doOperation(RMIConnectionImpl.java:1410)
javax.management.remote.rmi.RMIConnectionImpl.access$100(RMIConnectionImpl.java:81)
javax.management.remote.rmi.RMIConnectionImpl$PrivilegedOperation.run(RMIConnectionImpl.java:1247)
java.security.AccessController.doPrivileged(Native Method)
javax.management.remote.rmi.RMIConnectionImpl.doPrivilegedOperation(RMIConnectionImpl.java:1350)
javax.management.remote.rmi.RMIConnectionImpl.invoke(RMIConnectionImpl.java:784)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:585)
sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:294)
sun.rmi.transport.Transport$1.run(Transport.java:153)
java.security.AccessController.doPrivileged(Native Method)
sun.rmi.transport.Transport.serviceCall(Transport.java:149)
sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:466)
sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:707)
java.lang.Thread.run(Thread.java:595)
Aug 19, 2008 12:45:20 AM com.sun.cns.basicreg.cacao.SWUPOMCacaoAdapter getRegisterResult
INFO: SWUPOM Fault: Failed to register asset with AMS. Error message is :com.sun.scn.offering.prom.AssetRegistrationException: InvalidAssetException
Some further infos:
#cat /etc/release
Solaris 10 8/07 s10s_u4wos_12b SPARC
Copyright 2007 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 16 August 2007
#java -version
java version "1.5.0_16"
Java(TM) Platform, Standard Edition for Business (build 1.5.0_16-b02)
Java HotSpot(TM) Server VM (build 1.5.0_16-b02, mixed mode)
#cacaoadm get-param java-home
java-home=/usr/jdk/jdk1.5.0_16
here is the content of my registration profile (yes I can login as I can use those user and pass to register w/o any problem on the same subnet a Solaris x86)
userName=<removed>
password=<removed>
hostName=ent6500
subscriptionKey=
portalEnabled=false
proxyHostName=
proxyPort=
proxyUserName=
proxyPassword=
Any hint?
(last note.. all 20 CPU's are on line)
any hint would be really appreciated.

INFO: calling ams.registerAsset .......
Aug 19, 2008 4:34:46 PM com.sun.scn.offering.prom.AssetManagementServiceProvider registerAsset
INFO: DEBUG: next call is ams.registerAsset
Aug 19, 2008 4:34:48 PM com.sun.scn.service.BaseServiceClient dumpThrowable
WARNING: XYXYXY
com.sun.scn.offering.service.ams.InvalidAssetException: The Asset information is invalid.
at com.sun.scn.offering.service.ams.InvalidAssetException_LiteralSerializer.doDeserialize(InvalidAssetException_LiteralSerializer.java:56)
at com.sun.xml.rpc.encoding.literal.LiteralObjectSerializerBase.internalDeserialize(LiteralObjectSerializerBase.java:216)
at com.sun.xml.rpc.encoding.literal.LiteralObjectSerializerBase.deserialize(LiteralObjectSerializerBase.java:124)
at com.sun.scn.offering.service.ams.AssetMgmtServiceIF_registerAsset_Fault_SOAPSerializer.deserializeDetail(AssetMgmtServiceIF_registerAsset_Fault_SOAPSerializer.java:159)
at com.sun.xml.rpc.encoding.SOAPFaultInfoSerializer.doDeserialize(SOAPFaultInfoSerializer.java:134)
at com.sun.xml.rpc.encoding.ObjectSerializerBase.deserialize(ObjectSerializerBase.java:192)
at com.sun.xml.rpc.encoding.ReferenceableSerializerImpl.deserialize(ReferenceableSerializerImpl.java:155)
at com.sun.scn.offering.service.ams.AssetMgmtServiceIF_Stub._readBodyFaultElement(AssetMgmtServiceIF_Stub.java:483)
at com.sun.xml.rpc.client.StreamingSender._send(StreamingSender.java:208)
at com.sun.scn.offering.service.ams.AssetMgmtServiceIF_Stub.registerAsset(AssetMgmtServiceIF_Stub.java:261)
at com.sun.scn.offering.prom.AssetManagementServiceProvider.registerAsset(AssetManagementServiceProvider.java:154)
at com.sun.scn.offering.swupom.SWUPOfferingInstance.register(SWUPOfferingInstance.java:338)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sun.jmx.mbeanserver.StandardMetaDataImpl.invoke(StandardMetaDataImpl.java:414)
at javax.management.StandardMBean.invoke(StandardMBean.java:323)
at com.sun.jmx.mbeanserver.DynamicMetaDataImpl.invoke(DynamicMetaDataImpl.java:213)
at com.sun.jmx.mbeanserver.MetaDataImpl.invoke(MetaDataImpl.java:220)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:815)
at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:784)
at com.sun.jdmk.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:203)
at com.sun.cacao.agent.DispatchInterceptor.invoke(DispatchInterceptor.java:736)
at com.sun.cacao.agent.auth.impl.AccessControlInterceptor.invoke(AccessControlInterceptor.java:618)
at com.sun.jdmk.JdmkMBeanServerImpl.invoke(JdmkMBeanServerImpl.java:764)
at com.sun.cacao.common.instrum.impl.InstrumDefaultForwarder.invoke(InstrumDefaultForwarder.java:106)
at javax.management.remote.rmi.RMIConnectionImpl.doOperation(RMIConnectionImpl.java:1410)
at javax.management.remote.rmi.RMIConnectionImpl.access$100(RMIConnectionImpl.java:81)
at javax.management.remote.rmi.RMIConnectionImpl$PrivilegedOperation.run(RMIConnectionImpl.java:1247)
at java.security.AccessController.doPrivileged(Native Method)
at javax.management.remote.rmi.RMIConnectionImpl.doPrivilegedOperation(RMIConnectionImpl.java:1350)
at javax.management.remote.rmi.RMIConnectionImpl.invoke(RMIConnectionImpl.java:784)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:294)
at sun.rmi.transport.Transport$1.run(Transport.java:153)
at java.security.AccessController.doPrivileged(Native Method)
at sun.rmi.transport.Transport.serviceCall(Transport.java:149)
at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:466)
at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:707)
at java.lang.Thread.run(Thread.java:595)
everything is collected (CPU's HDD's...) at one point i got this warning in cacao log.
I've really no clue what the application means by "The Asset information is invalid".
I think it may be due to the fact that cpu #20 is not correctly detected:
This form the xml that is collected in cacaco
<cpu.list populated="20">
<cpu id="0">
<cpu.architecture>sparcv9</cpu.architecture>
<cpu.device.id>0</cpu.device.id>
<cpu.model>UltraSPARC-II</cpu.model>
<cpu.speed units="Mhz">400</cpu.speed>
<cpu.status>P_ONLINE</cpu.status>
</cpu>
<cpu id="1">
<cpu.architecture>sparcv9</cpu.architecture>
<cpu.device.id>0</cpu.device.id>
<cpu.model>UltraSPARC-II</cpu.model>
<cpu.speed units="Mhz">400</cpu.speed>
<cpu.status>P_ONLINE</cpu.status>
</cpu>
<cpu id="4">
<cpu.architecture>sparcv9</cpu.architecture>
<cpu.device.id>0</cpu.device.id>
<cpu.model>UltraSPARC-II</cpu.model>
<cpu.speed units="Mhz">400</cpu.speed>
<cpu.status>P_ONLINE</cpu.status>
</cpu>
<cpu id="5">
<cpu.architecture>sparcv9</cpu.architecture>
<cpu.device.id>0</cpu.device.id>
<cpu.model>UltraSPARC-II</cpu.model>
<cpu.speed units="Mhz">400</cpu.speed>
<cpu.status>P_ONLINE</cpu.status>
</cpu>
<cpu id="8">
<cpu.architecture>sparcv9</cpu.architecture>
<cpu.device.id>0</cpu.device.id>
<cpu.model>UltraSPARC-II</cpu.model>
<cpu.speed units="Mhz">400</cpu.speed>
<cpu.status>P_ONLINE</cpu.status>
</cpu>
<cpu id="9">
<cpu.architecture>sparcv9</cpu.architecture>
<cpu.device.id>0</cpu.device.id>
<cpu.model>UltraSPARC-II</cpu.model>
<cpu.speed units="Mhz">400</cpu.speed>
<cpu.status>P_ONLINE</cpu.status>
</cpu>
<cpu id="12">
<cpu.architecture>sparcv9</cpu.architecture>
<cpu.device.id>0</cpu.device.id>
<cpu.model>UltraSPARC-II</cpu.model>
<cpu.speed units="Mhz">400</cpu.speed>
<cpu.status>P_ONLINE</cpu.status>
</cpu>
<cpu id="13">
<cpu.architecture>sparcv9</cpu.architecture>
<cpu.device.id>0</cpu.device.id>
<cpu.model>UltraSPARC-II</cpu.model>
<cpu.speed units="Mhz">400</cpu.speed>
<cpu.status>P_ONLINE</cpu.status>
</cpu>
<cpu id="16">
<cpu.architecture>sparcv9</cpu.architecture>
<cpu.device.id>0</cpu.device.id>
<cpu.model>UltraSPARC-II</cpu.model>
<cpu.speed units="Mhz">400</cpu.speed>
<cpu.status>P_ONLINE</cpu.status>
</cpu>
<cpu id="17">
<cpu.architecture>sparcv9</cpu.architecture>
<cpu.device.id>0</cpu.device.id>
<cpu.model>UltraSPARC-II</cpu.model>
<cpu.speed units="Mhz">400</cpu.speed>
<cpu.status>P_ONLINE</cpu.status>
</cpu>
<cpu id="20">
<cpu.architecture>sparcv9</cpu.architecture>
<cpu.device.id>0</cpu.device.id>
<cpu.model>UltraSPARC-II</cpu.model>
<cpu.speed units="Mhz">400</cpu.speed>
<cpu.status>P_ONLINE</cpu.status>
</cpu>
<cpu id="21">
<cpu.architecture>sparcv9</cpu.architecture>
<cpu.device.id>0</cpu.device.id>
<cpu.model>UltraSPARC-II</cpu.model>
<cpu.speed units="Mhz">400</cpu.speed>
<cpu.status>P_ONLINE</cpu.status>
</cpu>
<cpu id="24">
<cpu.architecture>sparcv9</cpu.architecture>
<cpu.device.id>0</cpu.device.id>
<cpu.model>UltraSPARC-II</cpu.model>
<cpu.speed units="Mhz">400</cpu.speed>
<cpu.status>P_ONLINE</cpu.status>
</cpu>
<cpu id="25">
<cpu.architecture>sparcv9</cpu.architecture>
<cpu.device.id>0</cpu.device.id>
<cpu.model>UltraSPARC-II</cpu.model>
<cpu.speed units="Mhz">400</cpu.speed>
<cpu.status>P_ONLINE</cpu.status>
</cpu>
<cpu id="26">
<cpu.architecture>sparcv9</cpu.architecture>
<cpu.device.id>0</cpu.device.id>
<cpu.model>UltraSPARC-II</cpu.model>
<cpu.speed units="Mhz">400</cpu.speed>
<cpu.status>P_ONLINE</cpu.status>
</cpu>
<cpu id="27">
<cpu.architecture>sparcv9</cpu.architecture>
<cpu.device.id>0</cpu.device.id>
<cpu.model>UltraSPARC-II</cpu.model>
<cpu.speed units="Mhz">400</cpu.speed>
<cpu.status>P_ONLINE</cpu.status>
</cpu>
<cpu id="28">
<cpu.architecture>sparcv9</cpu.architecture>
<cpu.device.id>0</cpu.device.id>
<cpu.model>UltraSPARC-II</cpu.model>
<cpu.speed units="Mhz">400</cpu.speed>
<cpu.status>P_ONLINE</cpu.status>
</cpu>
<cpu id="29">
<cpu.architecture>sparcv9</cpu.architecture>
<cpu.device.id>0</cpu.device.id>
<cpu.model>UltraSPARC-II</cpu.model>
<cpu.speed units="Mhz">400</cpu.speed>
<cpu.status>P_ONLINE</cpu.status>
</cpu>
<cpu id="30">
<cpu.architecture>sparcv9</cpu.architecture>
<cpu.device.id>0</cpu.device.id>
<cpu.model>UltraSPARC-II</cpu.model>
<cpu.speed units="Mhz">400</cpu.speed>
<cpu.status>P_ONLINE</cpu.status>
</cpu>
<cpu>
<cpu.architecture />
<cpu.device.id>0</cpu.device.id>
<cpu.model>UltraSPARC-II</cpu.model>
<cpu.speed units="" />
<cpu.status />
</cpu>
</cpu.list>
As you can see cpu31 is not correctly identified :(
Is this the reason?
Edited by: pinciopallino on Aug 19, 2008 5:03 PM

AP's fail to register in a WLC

Hello
We are having problems with one of the two controllers of a WISM. APs fail to register in the first controller, but they register fine in the second one.
Our network is comprised of 3 WiSM (6 Controllers) running version 6.0.196.0 and 100 LAP1140's
WISM 1
Controller 1 (Works OK) -
Manager Interface       - VLAN 70 - IP Address 10.200.100.21 /28
AP Manager Interface - VLAN 71 - IP Address 10.200.100.34 /29
Controller 2 (Works OK) -
Manager Interface       - VLAN 70 - IP Address 10.200.100.22 /28
AP Manager Interface - VLAN 72 - IP Address 10.200.100.42 /29
WISM 2
Controller 3 (DOES NOT WORK) -
Manager Interface       - VLAN 70 - IP Address 10.200.100.23 /28
AP Manager Interface - VLAN 73 - IP Address 10.200.100.50 /29
Controller 4 (Works OK) -
Manager Interface       - VLAN 70 - IP Address 10.200.100.24 /28
AP Manager Interface - VLAN 74 - IP Address 10.200.100.58 /29
WISM 3
Controller 5 (Works OK) -
Manager Interface       - VLAN 70 - IP Address 10.200.100.25 /28
AP Manager Interface - VLAN 75 - IP Address 10.200.100.66 /29
Controller 6 (Works OK) -
Manager Interface       - VLAN 70 - IP Address 10.200.100.26 /28
AP Manager Interface - VLAN 76 - IP Address 10.200.100.74 /29
APs register correctly in 5 controllers but fail to register to Controller 3
There isn't any Firewalls between APs and Controllers and the six controllers are in the same Mobility Group. We use DHCP option 43.
Debugging commands in WLC 3 shows the following output:
*Dec 10 15:08:23.016: 58:bc:27:bf:03:80 Join Priority Processing status = 0, Incoming Ap's Priority 1, MaxLrads = 150, joined Aps =0
*Dec 10 11:26:31.017: 58:bc:27:bf:03:80 Received a Discover Request from 58:BC:27:BF:03:80 via IP broadcast address but the source IP address (192.168.28.64) is not in any of the configured subnets. Rejecting t
*Dec 10 15:08:23.017: 58:bc:27:bf:03:80 State machine handler: Failed to process msg type = 1 state = 0 from 192.168.28.64:10256
*Dec 10 15:08:23.017: 00:08:e3:ff:ff:20 Failed to parse CAPWAP packet from 192.168.28.64:10256
I replaced one AP by a PC. It received correctly one IP Address by DHCP and I could ping to Controller 3 (Manager Interface 10.200.100.23 and AP Manager Interface 10.200.100.50)
¿Any idea?
Thanks

Hello,
leolaohoo, Scott, thank you for your answer.
We put all AP Manager IP addresses and Management IP addresses on the same subnet and all the controller works ok now.
Thank you for your help.

Multiple Network Device Groups when importing to ISE using template

I have a question about importing a group of network devices into ISE using the template provided. The template only has a single column for Network Device Groups - is there a way to import devices and include more than one NDG? For instance, the NDG's we use are "Device Type" and "Location". I'd like to include both when doing my import and I've tried multiple ways to seperate the two strings within the column (comma's colons, semi-colons, spaces, pipes, tabs, etc), but i always get an error message that "NDG group does not exist". I also tried adding a new column into the template, but that just plain failed to import.
If there is any way to do this, I would appreciate any advice on how - I have to add about 40 devices per week to our ISE deployment and I'd rather not have to go in and add any parameters manually if it can be helped. Thanks very much!
Ross
BTW, we are running ISE ver 1.1.2 in case it is relevant.

Yes, you can do it. You have to use the pipe "|" to separate the groups. But please notice you must create the network device groups in advance.
For example, I have the following groups in my csv file to import a lot of network devices
Device Type#All Device Types#SWITCHES#375O-X|Location#All Locations#PERU#LIMA
But as a pre-requisite I have to create the network device groups.
If you have lots of network device groups, you can mass import them instead of creating them one by one.
Please rate if it helps

Iwl3945 failed to register network device archlinux

Similar Messages

Maybe you are looking for