J2EE Server installation

Hi experts,
Can any one suggest me how to install J2EE on SAP BI.7 server and i need to work on SAP BI-IP  . When i try to execute the rsplan T-code error message is diplaying J2EE is not installed . Can any pass step by steps and document .Highly thankful to you  send the Docu.
Regards
Rk

Now I'm getting confused... You are using BI Java only? That's not possible...
I assume that you have an BI ABAP system and you would like to install a java (J2EE) system with BI functionality, correct?
As mentioned, download the installation guide for a java only system and download the installation software.
During the installation of your system, you have to select a usage type for your java stack. Here you select BI.
After the installation of the java stack has been done, you have to perform some post activities, like a wizard in the NetWeaver Administrator for BI configuration, and adding the BI system in table RSPOR_T_PORTAL in the ABAP stack, so it is pointing to the correct system..
Hope this helps a bit.. If not, just let me know.
Kind regards,
Mark

Similar Messages

  • SAP WAS J2EE server installation on Windows Vista

    Hi Experts,
    Is there anything latest on SAP WAS J2EE server installation on Windows Vista. In SDN download section I see SAP NetWeaver 7.01 ABAP Trial Version available with Vista compatibility.
    Is there SAP J2EE server also available with Vista compatibility ?
    Regards,
    Yomesh

    > Is there anything latest on SAP WAS J2EE server installation on Windows Vista. In SDN download section I see SAP NetWeaver 7.01 ABAP Trial Version available with Vista compatibility.
    >
    > Is there SAP J2EE server also available with Vista compatibility ?
    The problem with J2EE is the support status of the used JDK. Sun does not support 1.4.2 under Vista/Windows 2008, technically it works.
    Markus

  • NWDS and J2ee server Installation

    Hi all,
    Iam new to web dynpro java .To download the necessary software for it i went to sap downloads page in SCN . i entered into Netweaver main releases. I am not understanding which version to down load . I want only web dynpro java and portal server.my system is having  window xp Sp3 OS  with 1 GB ram and 50 Gb freespace in hard drive. in some blogs i saw that only 1 gb is necessary for installing but in some it is 2GB min . what are the correct system requirements and
    which version of Netweaver is more suitable for installing in my system  and right place to download sufficient software .when
    i download also it is asking for going sap service market place. is there any other way to download necessary soft ware for practicing webdynpro java and portal server.......
    Thanks and Regards
    Prasad

    For learning Web Dynpro Java and Portal you should download the CE release: http://www.sdn.sap.com/irj/scn/nw-ce-downloads. From there you can download 7.1 and 7.2 trials. I would go for the 7.2 trial ("SAP NetWeaver Composition Environment 7.2 Trial Version").
    br,
    Tobias

  • Plz help error while starting j2ee server

    I 'm working on Win xp professional operating system.
    While starting the j2ee server from command line
    with the command
    j2ee -verbose
    earlier it was working perfectly but from 2 days its not starting even...even i have reinstalled the j2ee software ....i think there is some internal problem which is not related to setting up the enviornment variables and incorrectly typing of command... plz help me as soon as possible.. i wil be thankful ....
    I am getting error message as follows
    C:\Documents and Settings\Sunita Khilnaney>j2ee
    java.io.IOException: The system cannot find the path specified
    at java.io.Win32FileSystem.createFileExclusively(Native Method)
    at java.io.File.createNewFile(File.java:690)
    at com.sun.enterprise.repository.ConfigurationImpl.getServerRepository(C
    onfigurationImpl.java:92)
    at com.sun.enterprise.repository.ConfigurationImpl.<init>(ConfigurationI
    mpl.java:45)
    at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:170)
    at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:913)
    J2EE server listen port: 1050
    java.io.FileNotFoundException: C:\j2sdkee1.3\logs\compaq\j2ee\j2ee\system.out (T
    he system cannot find the path specified)
    at java.io.FileOutputStream.openAppend(Native Method)
    at java.io.FileOutputStream.<init>(FileOutputStream.java:100)
    at com.sun.enterprise.server.J2EEServer.redirectStreams(J2EEServer.java:
    534)
    at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:209)
    at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:913)
    java.io.FileNotFoundException: C:\j2sdkee1.3\logs\compaq\j2ee\j2ee\system.out (T
    he system cannot find the path specified)
    at java.io.FileOutputStream.openAppend(Native Method)
    at java.io.FileOutputStream.<init>(FileOutputStream.java:100)
    at com.sun.enterprise.server.J2EEServer.redirectStreams(J2EEServer.java:
    534)
    at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:209)
    at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:913)
    java.lang.RuntimeException: C:\j2sdkee1.3\logs\compaq\j2ee\j2ee\system.out (The
    system cannot find the path specified)
    at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:350)
    at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:913)
    J2EE server reported the following error: C:\j2sdkee1.3\logs\compaq\j2ee\j2ee\sy
    stem.out (The system cannot find the path specified)
    Error executing J2EE server ...
    C:\Documents and Settings\Sunita Khilnaney>

    Hello sunita,
    do one thing put yoor j2ee server installation in a folder whose name doesn't contain space.
    As you can see there ia a space btwn Documents & and. btwn Sunita & Khilnaney
    C:\Documents and Settings\Sunita Khilnaney>j2ee
    put it in folder like c:\SunitaKhilnaney>j2ee or c:\Sunita_Khilnaney>j2ee
    I hope it'll solve your pblm.
    Thanks,
    Dinesh

  • J2EE server does not start during installation

    Hi,
    I am installing WebAS JAVA 640 (NW04 SR1) on a Windows 2003/MSSQL server. I am using JAVA SDK 1.4.2_9. The installation stops at step 24/25 whereby the installer waits for the J2EE engine to start. After making 3 attempts to start the J2EE server, the installation process just hangs and I have to Cancel the installation.
    BTW, I am specifying a heap size of 1024 MB and using the "Database Only" option as UME data store during installation.
    Having checked the trace and log files, it seems the UME service fails to start, throws an exception and the message "the start of a core service failed, Web AS will not start".
    According to the information available  <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/20/361941edd5ef23e10000000a155106/content.htm">here</a>, I have checked the settings and it seems that option 2, <b>"User or group data is missing"</b> is causing the problem since database content of UME is missing. I have tried selecting entries from table UME_STRINGS but this table is empty.
    Now, the same link says that I should login to UME web application as SAP* but the problem is that without the J2EE engine starting up, I cannot login and create missing users/groups.
    Any ideas???
    Regards
    Shehryar

    Thanks to all who replied. I have actually tried all options suggested like waiting for retries until the box appears, trying to manually start the server, and reducing heap size. None worked for me. For your information, I have a 2.4 GHz machine with 4GB RAM so I think heap size should not be an issue. I checked SAP Note regarding heap size issues in Win 2003 but that does not seem to apply in my case since my system does not behave abnormally with JVM settings.
    Thanks again and I'll give it another shot.
    Regards
    Shehryar

  • Dispatcher Running; Server Not connected - J2ee Pos installation problems

    Hi,
    Got problem with starting J2EE Engine.
    The message in the browser:
    Dispatcher Running; Server Not connected - J2ee Pos installation problems
    Chked up in the log files:
    RFCEngine Server startup stopped.
    com.sap.mw.jco.JCo$Exception(129)-JCO_Error_Server_startup
    version of rfc driver is invalid.
    Any help
    Thnx
    Meesum

    Hi Rohin,
    Is it true that jdk must be > 1.4.
    Because I came across many places where it is explicitly stated that WAS 620 supports only jdk 1.3. pls let me know
    Thnx anyway
    meesum

  • Problems in installation of J2EE server.

    Hey guys,
    We tried installing the J2EE server. I set the local host details in Windows> Preferences in NWDS, but the server is not getting activated to test our applications. To start the server, I had gone to control panel>Administrative tools-->Services, here I have two services created named SAPJ2E00 and SAPJ2E01. When I tried to start these services, its giving me this error "Could not start the SAPJ2E00 server on local machine Error 5: Access Denied". Do I need to login with a different user ID?
    And another way which I tried is, starting the J2EE server through command line
    D:\usr\sap\J2E\JC00\exe>sapstart.exe name =J2E nr=JC00
    SAPDIAHOST=localhost
    And the response is something like which is mentioned below:
    sapstart.exe=>sapparam<1c>: No Profile used.
    Start service SAPJ2E_JC00 on machine
    localhost
    OpenSCManager of
    localhost failed. Error#: 1722
    Cannot connect to DCOM Interface of Start Service: -2147024891
    Any suggestions would be really helpful.
    Regards,
    Priyanka.

    Hi Priyanka,
    I guess you have installed SAP WebAS Java.
    If yes the you will be having a J2EE admin or <instancename>adm user; try starting with tht.
    I also want to know that which Java version and database versionyou have used.
    I also faced this situation where J2EE engine was not starting and the reason was some problem in Ms SQL server installation.
    This is my first post to this forum; excuse me if I misunderstood.
    Regards,
    Sumit

  • SAP Dual Server (ABAP and J2EE) local installation.

    Hi,
       Can someone point me to source of Dual Server - installable binary for Windows 64 bit.
    I also want developer studio along with this.
    Thanks in advance,
    Sunil.

    Sunil, as per my knowledge such a system is not support within demo versions of NetWeaver systems available on store.sap.com.
    You need to be SAP customer having proper license to install it by your own.
    cheers
    m./

  • J2EE Server unable to start

    Hi,
    first of all, i'm really new to SAP NW. Today I started installing the Sneak Preview of SAP NetWeaver 2004 7.0 SP9
    JavaStack on my Virtual Machine (Windows2003Server, J2SE 1.4.2.09) and it worked fine.
    After installation I started the SAP Management Console and tried to start my first and only instance J2E.
    In J2E i got 3 instances, the DB, Instance 0 and Instance 1.
    After start:
    DB is working (blue)
    Instance 0 is working (green)
    Instance 1 failed while starting (turned from yellow to red)
      Process List shows:
      jcontrol.EXE | J2EE Server | License check failed
      igswd.EXE | IGS Watchdog | Running
    Problem:
    I don't know why the License check failed!
    I downloaded the Software about mid of february, its been about 3 month ago and I ran the install for the first time
    today. What might be the problem? I searched the SDN-History for similar problems, but i did not find an adequate
    answer. I checked dev_jcontrol and the "license check failed" entry is in the file. So I'm wondering why my license
    check fails, although I'm installing the software for the first time!
    An info i got from the start.htm is:
    The license of this Trial Version is for evaluation purposes only and does not allow commercial use.
    The license is valid for 90 days and cannot be extended (View license). If the license has expired, the
    entry license check failed will appear in the trace file <INST_DRIVE>:\usr\sap\J2E\JC01\work\dev_jcontrol,
    if the instance name remains unchanged during the installation process. Please refer to SAP Developer
    Network for more information about commercially available editions of SAP Web Application Server and SAP NetWeaver Developer Studio.
    May one find some more information in that file?
    I realised that a package is missing, but read in the forum, that this is not a obligatory package (?)
    JStartupICheckFrameworkPackage: can't find framework package D:\usr\sap\J2E\JC01\exe\jvmx.jar
    trc file: "D:\usr\sap\J2E\JC01\work\dev_jcontrol", trc level: 1, release: "700"
    node name   : jcontrol
    pid         : 2644
    system name : J2E
    system nr.  : 01
    started at  : Wed May 07 13:28:11 2008
    arguments       :
           arg[00] : D:\usr\sap\J2E\JC01\exe\jcontrol.EXE
           arg[01] : pf=D:\usr\sap\J2E\SYS\profile\J2E_JC01_sope75
    [Thr 1352] Wed May 07 13:28:11 2008
    [Thr 1352] *** WARNING => INFO: Unknown property [instance.system.id=1] [jstartxx.c   841]
    [Thr 1352] *** WARNING => INFO: Unknown property [instance.en.host=sope75] [jstartxx.c   841]
    [Thr 1352] *** WARNING => INFO: Unknown property [instance.box.number=J2EJC01sope75] [jstartxx.c   841]
    [Thr 1352] *** WARNING => INFO: Unknown property [instance.en.port=3200] [jstartxx.c   841]
    JStartupReadInstanceProperties: read instance properties [D:\usr\sap\J2E\JC01\j2ee\cluster\instance.properties;D:\usr\sap\J2E\JC01\SDM\program\config\sdm_jstartup.properties]
    -> ms host    : sope75
    -> ms port    : 3900
    -> OS libs    : D:\usr\sap\J2E\JC01\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Used property files
    -> files [00] : D:\usr\sap\J2E\JC01\j2ee\cluster\instance.properties
    -> files [01] : D:\usr\sap\J2E\JC01\SDM\program\config\sdm_jstartup.properties
    Instance properties
    -> ms host    : sope75
    -> ms port    : 3900
    -> os libs    : D:\usr\sap\J2E\JC01\j2ee\os_libs
    -> admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Bootstrap nodes
    -> [00] bootstrap_ID18439050 : D:\usr\sap\J2E\JC01\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID18439000 : D:\usr\sap\J2E\JC01\j2ee\cluster\instance.properties
    -> [02] bootstrap            : D:\usr\sap\J2E\JC01\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID18439050           : D:\usr\sap\J2E\JC01\j2ee\cluster\instance.properties
    -> [01] ID18439000           : D:\usr\sap\J2E\JC01\j2ee\cluster\instance.properties
    -> [02] sdm                  : D:\usr\sap\J2E\JC01\SDM\program\config\sdm_jstartup.properties
    [Thr 1352] [Node: bootstrap] java home is set by profile parameter
         Java Home: C:\Programme\Java\j2sdk1.4.2_09
    [Thr 1352] Wed May 07 13:28:19 2008
    [Thr 1352] JStartupICheckFrameworkPackage: can't find framework package D:\usr\sap\J2E\JC01\exe\jvmx.jar
    JStartupIReadSection: read node properties [bootstrap]
    -> node name          : bootstrap
    -> node type          : bootstrap
    -> node execute       : yes
    -> java path          : C:\Programme\Java\j2sdk1.4.2_09
    -> java parameters    : -Djco.jarm=1 -Djco.jarm=1
    -> java vm version    : 1.4.2_09-b05
    -> java vm vendor     : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
    -> java vm type       : server
    -> java vm cpu        : x86
    -> heap size          : 512M
    -> root path          : D:\usr\sap\J2E\JC01\j2ee\cluster
    -> class path         : .\bootstrap\launcher.jar
    -> OS libs path       : D:\usr\sap\J2E\JC01\j2ee\os_libs
    -> main class         : com.sap.engine.offline.OfflineToolStart
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : D:\usr\sap\J2E\JC01\exe\jstartup.jar;D:\usr\sap\J2E\JC01\exe\jvmx.jar
    -> parameters         : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID0184390
    -> debuggable         : yes
    -> debug mode         : no
    -> debug port         : 60000
    -> shutdown timeout   : 120000
    [Thr 1352] JControlExecuteBootstrap: execute bootstrap process [bootstrap]
    [Thr 1352] [Node: bootstrap] java home is set by profile parameter
         Java Home: C:\Programme\Java\j2sdk1.4.2_09
    [Thr 1352] JStartupICheckFrameworkPackage: can't find framework package D:\usr\sap\J2E\JC01\exe\jvmx.jar
    JStartupIReadSection: read node properties [bootstrap]
    -> node name          : bootstrap
    -> node type          : bootstrap
    -> node execute       : yes
    -> java path          : C:\Programme\Java\j2sdk1.4.2_09
    -> java parameters    : -Djco.jarm=1 -Djco.jarm=1
    -> java vm version    : 1.4.2_09-b05
    -> java vm vendor     : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
    -> java vm type       : server
    -> java vm cpu        : x86
    -> heap size          : 512M
    -> root path          : D:\usr\sap\J2E\JC01\j2ee\cluster
    -> class path         : .\bootstrap\launcher.jar
    -> OS libs path       : D:\usr\sap\J2E\JC01\j2ee\os_libs
    -> main class         : com.sap.engine.offline.OfflineToolStart
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : D:\usr\sap\J2E\JC01\exe\jstartup.jar;D:\usr\sap\J2E\JC01\exe\jvmx.jar
    -> parameters         : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID0184390
    -> debuggable         : yes
    -> debug mode         : no
    -> debug port         : 60000
    -> shutdown timeout   : 120000
    JControlStartJLaunch: program = D:\usr\sap\J2E\JC01\exe\jlaunch.exe
    -> arg[00] = D:\usr\sap\J2E\JC01\exe\jlaunch.exe
    -> arg[01] = pf=D:\usr\sap\J2E\SYS\profile\J2E_JC01_sope75
    -> arg[02] = -DSAPINFO=J2E_01_bootstrap
    -> arg[03] = -nodeId=-1
    -> arg[04] = -file=D:\usr\sap\J2E\JC01\j2ee\cluster\instance.properties
    -> arg[05] = -syncSem=JSTARTUP_WAIT_ON_2644
    -> arg[06] = -nodeName=bootstrap
    -> arg[07] = -jvmOutFile=D:\usr\sap\J2E\JC01\work\jvm_bootstrap.out
    -> arg[08] = -stdOutFile=D:\usr\sap\J2E\JC01\work\std_bootstrap.out
    -> arg[09] = -locOutFile=D:\usr\sap\J2E\JC01\work\dev_bootstrap
    -> arg[10] = -mode=BOOTSTRAP
    -> arg[11] = pf=D:\usr\sap\J2E\SYS\profile\J2E_JC01_sope75
    -> lib path = PATH=C:\Programme\Java\j2sdk1.4.2_09\jre\bin\server;C:\Programme\Java\j2sdk1.4.2_09\jre\bin;d:\sapdb\programs\bin;d:\sapdb\programs\pgm;c:\orabase\1020\bin;C:\Perl\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\system32\WBEM;c:\prgramme\sharepoint portal server\bin;C:\Programme\Gemeinsame Dateien\Microsoft Shared\web server extensions\60\BIN;C:\Programme\Microsoft SQL Server\80\Tools\Binn\;c:\Programme\Java\jdk1.5.0_13\bin;D:\usr\sap\J2E\SYS\exe\uc\NTI386
    -> exe path = PATH=C:\Programme\Java\j2sdk1.4.2_09\bin;D:\usr\sap\J2E\JC01\j2ee\os_libs;d:\sapdb\programs\bin;d:\sapdb\programs\pgm;c:\orabase\1020\bin;C:\Perl\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\system32\WBEM;c:\prgramme\sharepoint portal server\bin;C:\Programme\Gemeinsame Dateien\Microsoft Shared\web server extensions\60\BIN;C:\Programme\Microsoft SQL Server\80\Tools\Binn\;c:\Programme\Java\jdk1.5.0_13\bin;D:\usr\sap\J2E\SYS\exe\uc\NTI386
    [Thr 1352] Wed May 07 13:30:12 2008
    [Thr 1352] JControlExecuteBootstrap: read instance values after global bootstrap
    [Thr 1352] *** WARNING => INFO: Unknown property [instance.box.number=J2EJC01sope75] [jstartxx.c   841]
    [Thr 1352] *** WARNING => INFO: Unknown property [instance.en.host=sope75] [jstartxx.c   841]
    [Thr 1352] *** WARNING => INFO: Unknown property [instance.en.port=3200] [jstartxx.c   841]
    [Thr 1352] *** WARNING => INFO: Unknown property [instance.system.id=1] [jstartxx.c   841]
    JStartupReadInstanceProperties: read instance properties [D:\usr\sap\J2E\JC01\j2ee\cluster\instance.properties;D:\usr\sap\J2E\JC01\SDM\program\config\sdm_jstartup.properties]
    -> ms host    : sope75
    -> ms port    : 3900
    -> OS libs    : D:\usr\sap\J2E\JC01\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : normal
    -> run action : NONE
    -> enabled    : yes
    [Thr 1352] JControlExecuteBootstrap: enumerate the nodes after global bootstrap
    Used property files
    -> files [00] : D:\usr\sap\J2E\JC01\j2ee\cluster\instance.properties
    -> files [01] : D:\usr\sap\J2E\JC01\SDM\program\config\sdm_jstartup.properties
    Instance properties
    -> ms host    : sope75
    -> ms port    : 3900
    -> os libs    : D:\usr\sap\J2E\JC01\j2ee\os_libs
    -> admin URL  :
    -> run mode   : normal
    -> run action : NONE
    -> enabled    : yes
    Bootstrap nodes
    -> [00] bootstrap            : D:\usr\sap\J2E\JC01\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID18439000 : D:\usr\sap\J2E\JC01\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID18439050 : D:\usr\sap\J2E\JC01\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID18439000           : D:\usr\sap\J2E\JC01\j2ee\cluster\instance.properties
    -> [01] ID18439050           : D:\usr\sap\J2E\JC01\j2ee\cluster\instance.properties
    -> [02] sdm                  : D:\usr\sap\J2E\JC01\SDM\program\config\sdm_jstartup.properties
    [Thr 1352] JControlExecuteBootstrap: execute bootstrap process [bootstrap_ID18439000]
    [Thr 1352] [Node: dispatcher bootstrap] java home is set by profile parameter
         Java Home: C:\Programme\Java\j2sdk1.4.2_09
    [Thr 1352] Wed May 07 13:30:16 2008
    [Thr 1352] JStartupICheckFrameworkPackage: can't find framework package D:\usr\sap\J2E\JC01\exe\jvmx.jar
    JStartupIReadSection: read node properties [bootstrap_ID18439000]
    -> node name          : dispatcher bootstrap
    -> node type          : bootstrap
    -> node execute       : yes
    -> jlaunch parameters :
    -> java path          : C:\Programme\Java\j2sdk1.4.2_09
    -> java parameters    : -Djco.jarm=1
    -> java vm version    : 1.4.2_09-b05
    -> java vm vendor     : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
    -> java vm type       : server
    -> java vm cpu        : x86
    -> heap size          : 256M
    -> root path          : D:\usr\sap\J2E\JC01\j2ee\cluster
    -> class path         : .\bootstrap\launcher.jar
    -> OS libs path       : D:\usr\sap\J2E\JC01\j2ee\os_libs
    -> main class         : com.sap.engine.offline.OfflineToolStart
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : D:\usr\sap\J2E\JC01\exe\jstartup.jar;D:\usr\sap\J2E\JC01\exe\jvmx.jar
    -> parameters         : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID018439000
    -> debuggable         : yes
    -> debug mode         : no
    -> debug port         : 60000
    -> shutdown timeout   : 120000
    JControlStartJLaunch: program = D:\usr\sap\J2E\JC01\exe\jlaunch.exe
    -> arg[00] = D:\usr\sap\J2E\JC01\exe\jlaunch.exe
    -> arg[01] = pf=D:\usr\sap\J2E\SYS\profile\J2E_JC01_sope75
    -> arg[02] = -DSAPINFO=J2E_01_bootstrap
    -> arg[03] = -nodeId=-1
    -> arg[04] = -file=D:\usr\sap\J2E\JC01\j2ee\cluster\instance.properties
    -> arg[05] = -syncSem=JSTARTUP_WAIT_ON_2644
    -> arg[06] = -nodeName=bootstrap_ID18439000
    -> arg[07] = -jvmOutFile=D:\usr\sap\J2E\JC01\work\jvm_bootstrap_ID18439000.out
    -> arg[08] = -stdOutFile=D:\usr\sap\J2E\JC01\work\std_bootstrap_ID18439000.out
    -> arg[09] = -locOutFile=D:\usr\sap\J2E\JC01\work\dev_bootstrap_ID18439000
    -> arg[10] = -mode=BOOTSTRAP
    -> arg[11] = pf=D:\usr\sap\J2E\SYS\profile\J2E_JC01_sope75
    -> lib path = PATH=C:\Programme\Java\j2sdk1.4.2_09\jre\bin\server;C:\Programme\Java\j2sdk1.4.2_09\jre\bin;d:\sapdb\programs\bin;d:\sapdb\programs\pgm;c:\orabase\1020\bin;C:\Perl\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\system32\WBEM;c:\prgramme\sharepoint portal server\bin;C:\Programme\Gemeinsame Dateien\Microsoft Shared\web server extensions\60\BIN;C:\Programme\Microsoft SQL Server\80\Tools\Binn\;c:\Programme\Java\jdk1.5.0_13\bin;D:\usr\sap\J2E\SYS\exe\uc\NTI386
    -> exe path = PATH=C:\Programme\Java\j2sdk1.4.2_09\bin;D:\usr\sap\J2E\JC01\j2ee\os_libs;d:\sapdb\programs\bin;d:\sapdb\programs\pgm;c:\orabase\1020\bin;C:\Perl\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\system32\WBEM;c:\prgramme\sharepoint portal server\bin;C:\Programme\Gemeinsame Dateien\Microsoft Shared\web server extensions\60\BIN;C:\Programme\Microsoft SQL Server\80\Tools\Binn\;c:\Programme\Java\jdk1.5.0_13\bin;D:\usr\sap\J2E\SYS\exe\uc\NTI386
    [Thr 1352] Wed May 07 13:31:04 2008
    [Thr 1352] JControlExecuteBootstrap: execute bootstrap process [bootstrap_ID18439050]
    [Thr 1352] [Node: server0 bootstrap] java home is set by profile parameter
         Java Home: C:\Programme\Java\j2sdk1.4.2_09
    [Thr 1352] Wed May 07 13:31:06 2008
    [Thr 1352] JStartupICheckFrameworkPackage: can't find framework package D:\usr\sap\J2E\JC01\exe\jvmx.jar
    JStartupIReadSection: read node properties [bootstrap_ID18439050]
    -> node name          : server0 bootstrap
    -> node type          : bootstrap
    -> node execute       : yes
    -> jlaunch parameters :
    -> java path          : C:\Programme\Java\j2sdk1.4.2_09
    -> java parameters    : -Djco.jarm=1
    -> java vm version    : 1.4.2_09-b05
    -> java vm vendor     : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
    -> java vm type       : server
    -> java vm cpu        : x86
    -> heap size          : 256M
    -> root path          : D:\usr\sap\J2E\JC01\j2ee\cluster
    -> class path         : .\bootstrap\launcher.jar
    -> OS libs path       : D:\usr\sap\J2E\JC01\j2ee\os_libs
    -> main class         : com.sap.engine.offline.OfflineToolStart
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : D:\usr\sap\J2E\JC01\exe\jstartup.jar;D:\usr\sap\J2E\JC01\exe\jvmx.jar
    -> parameters         : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID018439050
    -> debuggable         : yes
    -> debug mode         : no
    -> debug port         : 60000
    -> shutdown timeout   : 120000
    JControlStartJLaunch: program = D:\usr\sap\J2E\JC01\exe\jlaunch.exe
    -> arg[00] = D:\usr\sap\J2E\JC01\exe\jlaunch.exe
    -> arg[01] = pf=D:\usr\sap\J2E\SYS\profile\J2E_JC01_sope75
    -> arg[02] = -DSAPINFO=J2E_01_bootstrap
    -> arg[03] = -nodeId=-1
    -> arg[04] = -file=D:\usr\sap\J2E\JC01\j2ee\cluster\instance.properties
    -> arg[05] = -syncSem=JSTARTUP_WAIT_ON_2644
    -> arg[06] = -nodeName=bootstrap_ID18439050
    -> arg[07] = -jvmOutFile=D:\usr\sap\J2E\JC01\work\jvm_bootstrap_ID18439050.out
    -> arg[08] = -stdOutFile=D:\usr\sap\J2E\JC01\work\std_bootstrap_ID18439050.out
    -> arg[09] = -locOutFile=D:\usr\sap\J2E\JC01\work\dev_bootstrap_ID18439050
    -> arg[10] = -mode=BOOTSTRAP
    -> arg[11] = pf=D:\usr\sap\J2E\SYS\profile\J2E_JC01_sope75
    -> lib path = PATH=C:\Programme\Java\j2sdk1.4.2_09\jre\bin\server;C:\Programme\Java\j2sdk1.4.2_09\jre\bin;d:\sapdb\programs\bin;d:\sapdb\programs\pgm;c:\orabase\1020\bin;C:\Perl\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\system32\WBEM;c:\prgramme\sharepoint portal server\bin;C:\Programme\Gemeinsame Dateien\Microsoft Shared\web server extensions\60\BIN;C:\Programme\Microsoft SQL Server\80\Tools\Binn\;c:\Programme\Java\jdk1.5.0_13\bin;D:\usr\sap\J2E\SYS\exe\uc\NTI386
    -> exe path = PATH=C:\Programme\Java\j2sdk1.4.2_09\bin;D:\usr\sap\J2E\JC01\j2ee\os_libs;d:\sapdb\programs\bin;d:\sapdb\programs\pgm;c:\orabase\1020\bin;C:\Perl\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\system32\WBEM;c:\prgramme\sharepoint portal server\bin;C:\Programme\Gemeinsame Dateien\Microsoft Shared\web server extensions\60\BIN;C:\Programme\Microsoft SQL Server\80\Tools\Binn\;c:\Programme\Java\jdk1.5.0_13\bin;D:\usr\sap\J2E\SYS\exe\uc\NTI386
    [Thr 1352] Wed May 07 13:33:15 2008
    [Thr 1352] JControlIBuildProcessList: Maximum error count is set to 4
    [Thr 1308] JControlRequestFunc: Thread 1308 started as listener thread for np messages.
    [Thr 1352] [Node: dispatcher] java home is set by profile parameter
         Java Home: C:\Programme\Java\j2sdk1.4.2_09
    [Thr 1352] Wed May 07 13:33:17 2008
    [Thr 1352] JStartupICheckFrameworkPackage: can't find framework package D:\usr\sap\J2E\JC01\exe\jvmx.jar
    JStartupIReadSection: read node properties [ID18439000]
    -> node name          : dispatcher
    -> node type          : dispatcher
    -> node execute       : yes
    -> jlaunch parameters :
    -> java path          : C:\Programme\Java\j2sdk1.4.2_09
    -> java parameters    : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -verbose:gc  -verbose:gc -XX:NewSize=28m -XX:MaxNewSize=28m -XX:+DisableExplicitGC
    -> java vm version    : 1.4.2_09-b05
    -> java vm vendor     : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
    -> java vm type       : server
    -> java vm cpu        : x86
    -> heap size          : 170M
    -> init heap size     : 170M
    -> root path          : D:\usr\sap\J2E\JC01\j2ee\cluster\dispatcher
    -> class path         : .\bin\boot\boot.jar;.\bin\system\bytecode.jar;.
    -> OS libs path       : D:\usr\sap\J2E\JC01\j2ee\os_libs
    -> main class         : com.sap.engine.boot.Start
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : D:\usr\sap\J2E\JC01\exe\jstartup.jar;D:\usr\sap\J2E\JC01\exe\jvmx.jar
    -> parameters         :
    -> debuggable         : no
    -> debug mode         : no
    -> debug port         : 60000
    -> shutdown timeout   : 120000
    [Thr 1352] [Node: server0] java home is set by profile parameter
         Java Home: C:\Programme\Java\j2sdk1.4.2_09
    [Thr 1352] Wed May 07 13:33:18 2008
    [Thr 1352] JStartupICheckFrameworkPackage: can't find framework package D:\usr\sap\J2E\JC01\exe\jvmx.jar
    JStartupIReadSection: read node properties [ID18439050]
    -> node name          : server0
    -> node type          : server
    -> node execute       : yes
    -> jlaunch parameters :
    -> java path          : C:\Programme\Java\j2sdk1.4.2_09
    -> java parameters    : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Djco.jarm=1 -verbose:gc -Djava.awt.headless=true -Dsun.io.useCanonCaches=false -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer -XX:NewSize=145m -XX:MaxNewSize=145m -XX:MaxPermSize=192m -XX:PermSize=192m -XX:+DisableExplicitGC -XX:+UseParNewGC -XX:+PrintGCDetails -XX:+PrintGCTimeStamps -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -XX:SoftRefLRUPolicyMSPerMB=1 -verbose:gc
    -> java vm version    : 1.4.2_09-b05
    -> java vm vendor     : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
    -> java vm type       : server
    -> java vm cpu        : x86
    -> heap size          : 874M
    -> init heap size     : 874M
    -> root path          : D:\usr\sap\J2E\JC01\j2ee\cluster\server0
    -> class path         : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> OS libs path       : D:\usr\sap\J2E\JC01\j2ee\os_libs
    -> main class         : com.sap.engine.boot.Start
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : D:\usr\sap\J2E\JC01\exe\jstartup.jar;D:\usr\sap\J2E\JC01\exe\jvmx.jar
    -> parameters         :
    -> debuggable         : yes
    -> debug mode         : yes
    -> debug port         : 50121
    -> shutdown timeout   : 120000
    [Thr 1352] INFO: Invalid property value [Debbugable=yes]
    [Thr 1352] [Node: SDM] java home is set by profile parameter
         Java Home: C:\Programme\Java\j2sdk1.4.2_09
    [Thr 1352] Wed May 07 13:33:19 2008
    [Thr 1352] JStartupICheckFrameworkPackage: can't find framework package D:\usr\sap\J2E\JC01\exe\jvmx.jar
    JStartupIReadSection: read node properties [sdm]
    -> node name          : SDM
    -> node type          : sdm
    -> node execute       : yes
    -> java path          : C:\Programme\Java\j2sdk1.4.2_09
    -> java parameters    :
    -> java vm version    : 1.4.2_09-b05
    -> java vm vendor     : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
    -> java vm type       : server
    -> java vm cpu        : x86
    -> heap size          : 256M
    -> root path          : D:\usr\sap\J2E\JC01\SDM\program
    -> class path         : D:\usr\sap\J2E\JC01\SDM\program\bin\SDM.jar
    -> OS libs path       : D:\usr\sap\J2E\JC01\j2ee\os_libs
    -> main class         : SDMInternal
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : D:\usr\sap\J2E\JC01\exe\jstartup.jar;D:\usr\sap\J2E\JC01\exe\jvmx.jar
    -> shutdown class     : com.sap.sdm.jstartup.shutdown.InternalShutDown
    -> parameters         : server sdmhome=D:\usr\sap\J2E\JC01\SDM\program
    -> debuggable         : yes
    -> debug mode         : no
    -> debug port         : 60000
    -> shutdown timeout   : 120000
    [Thr 1352] JControlMSConnect: attached to message server (sope75/3900)
    JControlStartJLaunch: program = D:\usr\sap\J2E\JC01\exe\jlaunch.exe
    -> arg[00] = D:\usr\sap\J2E\JC01\exe\jlaunch.exe
    -> arg[01] = pf=D:\usr\sap\J2E\SYS\profile\J2E_JC01_sope75
    -> arg[02] = -DSAPINFO=J2E_01_dispatcher
    -> arg[03] = -nodeId=0
    -> arg[04] = -file=D:\usr\sap\J2E\JC01\j2ee\cluster\instance.properties
    -> arg[05] = -syncSem=JSTARTUP_WAIT_ON_2644
    -> arg[06] = -nodeName=ID18439000
    -> arg[07] = -jvmOutFile=D:\usr\sap\J2E\JC01\work\jvm_dispatcher.out
    -> arg[08] = -stdOutFile=D:\usr\sap\J2E\JC01\work\std_dispatcher.out
    -> arg[09] = -locOutFile=D:\usr\sap\J2E\JC01\work\dev_dispatcher
    -> arg[10] = -mode=JCONTROL
    -> arg[11] = pf=D:\usr\sap\J2E\SYS\profile\J2E_JC01_sope75
    -> lib path = PATH=C:\Programme\Java\j2sdk1.4.2_09\jre\bin\server;C:\Programme\Java\j2sdk1.4.2_09\jre\bin;d:\sapdb\programs\bin;d:\sapdb\programs\pgm;c:\orabase\1020\bin;C:\Perl\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\system32\WBEM;c:\prgramme\sharepoint portal server\bin;C:\Programme\Gemeinsame Dateien\Microsoft Shared\web server extensions\60\BIN;C:\Programme\Microsoft SQL Server\80\Tools\Binn\;c:\Programme\Java\jdk1.5.0_13\bin;D:\usr\sap\J2E\SYS\exe\uc\NTI386
    -> exe path = PATH=C:\Programme\Java\j2sdk1.4.2_09\bin;D:\usr\sap\J2E\JC01\j2ee\os_libs;d:\sapdb\programs\bin;d:\sapdb\programs\pgm;c:\orabase\1020\bin;C:\Perl\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\system32\WBEM;c:\prgramme\sharepoint portal server\bin;C:\Programme\Gemeinsame Dateien\Microsoft Shared\web server extensions\60\BIN;C:\Programme\Microsoft SQL Server\80\Tools\Binn\;c:\Programme\Java\jdk1.5.0_13\bin;D:\usr\sap\J2E\SYS\exe\uc\NTI386
    [Thr 3376] JControlMSMessageFunc: Thread 3376 started as listener thread for ms messages.
    [Thr 1352] JControlICheckProcessList: process dispatcher started (PID:724)
    JControlStartJLaunch: program = D:\usr\sap\J2E\JC01\exe\jlaunch.exe
    -> arg[00] = D:\usr\sap\J2E\JC01\exe\jlaunch.exe
    -> arg[01] = pf=D:\usr\sap\J2E\SYS\profile\J2E_JC01_sope75
    -> arg[02] = -DSAPINFO=J2E_01_server
    -> arg[03] = -nodeId=1
    -> arg[04] = -file=D:\usr\sap\J2E\JC01\j2ee\cluster\instance.properties
    -> arg[05] = -syncSem=JSTARTUP_WAIT_ON_2644
    -> arg[06] = -nodeName=ID18439050
    -> arg[07] = -jvmOutFile=D:\usr\sap\J2E\JC01\work\jvm_server0.out
    -> arg[08] = -stdOutFile=D:\usr\sap\J2E\JC01\work\std_server0.out
    -> arg[09] = -locOutFile=D:\usr\sap\J2E\JC01\work\dev_server0
    -> arg[10] = -mode=JCONTROL
    -> arg[11] = -debugMode=yes
    -> arg[12] = pf=D:\usr\sap\J2E\SYS\profile\J2E_JC01_sope75
    -> lib path = PATH=C:\Programme\Java\j2sdk1.4.2_09\jre\bin\server;C:\Programme\Java\j2sdk1.4.2_09\jre\bin;d:\sapdb\programs\bin;d:\sapdb\programs\pgm;c:\orabase\1020\bin;C:\Perl\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\system32\WBEM;c:\prgramme\sharepoint portal server\bin;C:\Programme\Gemeinsame Dateien\Microsoft Shared\web server extensions\60\BIN;C:\Programme\Microsoft SQL Server\80\Tools\Binn\;c:\Programme\Java\jdk1.5.0_13\bin;D:\usr\sap\J2E\SYS\exe\uc\NTI386
    -> exe path = PATH=C:\Programme\Java\j2sdk1.4.2_09\bin;D:\usr\sap\J2E\JC01\j2ee\os_libs;d:\sapdb\programs\bin;d:\sapdb\programs\pgm;c:\orabase\1020\bin;C:\Perl\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\system32\WBEM;c:\prgramme\sharepoint portal server\bin;C:\Programme\Gemeinsame Dateien\Microsoft Shared\web server extensions\60\BIN;C:\Programme\Microsoft SQL Server\80\Tools\Binn\;c:\Programme\Java\jdk1.5.0_13\bin;D:\usr\sap\J2E\SYS\exe\uc\NTI386
    [Thr 1352] JControlICheckProcessList: process server0 started (PID:2276)
    JControlStartJLaunch: program = D:\usr\sap\J2E\JC01\exe\jlaunch.exe
    -> arg[00] = D:\usr\sap\J2E\JC01\exe\jlaunch.exe
    -> arg[01] = pf=D:\usr\sap\J2E\SYS\profile\J2E_JC01_sope75
    -> arg[02] = -DSAPINFO=J2E_01_sdm
    -> arg[03] = -nodeId=2
    -> arg[04] = -file=D:\usr\sap\J2E\JC01\SDM\program\config\sdm_jstartup.properties
    -> arg[05] = -syncSem=JSTARTUP_WAIT_ON_2644
    -> arg[06] = -nodeName=sdm
    -> arg[07] = -jvmOutFile=D:\usr\sap\J2E\JC01\work\jvm_sdm.out
    -> arg[08] = -stdOutFile=D:\usr\sap\J2E\JC01\work\std_sdm.out
    -> arg[09] = -locOutFile=D:\usr\sap\J2E\JC01\work\dev_sdm
    -> arg[10] = -mode=JCONTROL
    -> arg[11] = pf=D:\usr\sap\J2E\SYS\profile\J2E_JC01_sope75
    -> lib path = PATH=C:\Programme\Java\j2sdk1.4.2_09\jre\bin\server;C:\Programme\Java\j2sdk1.4.2_09\jre\bin;d:\sapdb\programs\bin;d:\sapdb\programs\pgm;c:\orabase\1020\bin;C:\Perl\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\system32\WBEM;c:\prgramme\sharepoint portal server\bin;C:\Programme\Gemeinsame Dateien\Microsoft Shared\web server extensions\60\BIN;C:\Programme\Microsoft SQL Server\80\Tools\Binn\;c:\Programme\Java\jdk1.5.0_13\bin;D:\usr\sap\J2E\SYS\exe\uc\NTI386
    -> exe path = PATH=C:\Programme\Java\j2sdk1.4.2_09\bin;D:\usr\sap\J2E\JC01\j2ee\os_libs;d:\sapdb\programs\bin;d:\sapdb\programs\pgm;c:\orabase\1020\bin;C:\Perl\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\system32\WBEM;c:\prgramme\sharepoint portal server\bin;C:\Programme\Gemeinsame Dateien\Microsoft Shared\web server extensions\60\BIN;C:\Programme\Microsoft SQL Server\80\Tools\Binn\;c:\Programme\Java\jdk1.5.0_13\bin;D:\usr\sap\J2E\SYS\exe\uc\NTI386
    [Thr 1352] JControlICheckProcessList: process SDM started (PID:3312)
    [Thr 1352] JControlMSSendLogon: delete SDM logon information (rc=0)
    [Thr 3376] Wed May 07 13:33:47 2008
    [Thr 3376] JControlIEnableProcesses: disable processes of type (Exclude:0) [SDM Server]
    [Thr 3376] JControlIDisableProcess: disable process SDM
    [Thr 3376] JControlIProcessSoftKill: soft kill of process SDM (pid:3312)
    [Thr 1352] Wed May 07 13:33:52 2008
    [Thr 1352] JControlICheckProcessList: process SDM (pid:3312) died (STOPPING)
    [Thr 1352] JControlIResetProcess: reset process SDM
    [Thr 1352] Wed May 07 14:20:27 2008
    [Thr 1352] JControlICheckProcessList: process dispatcher (pid:724) died (RUN-FLAG)
    [Thr 1352] JControlIResetProcess: reset process dispatcher
    *[Thr 1352] JControlICheckProcessList: license check failed*
    *[Thr 1352] JControlMainLoop: license check failed -> shutdown the instance*
    [Thr 1352] JControlProcessMessage: received <shutdown without restart> command
    [Thr 1352] JControlIStopInstance: shutting down (command: 0)
    [Thr 1352] JControlIProcessSoftKill: soft kill of process server0 (pid:2276)
    [Thr 1352] Wed May 07 14:22:33 2008
    [Thr 1352] *** ERROR => Can't terminate process (pid = 2276,handle = 00000678,err = 5) [jstartnt.c   690]
    [Thr 1352] *** ERROR => Critical error, can't terminate process server0 (pid:2276) (rc=-2) [jcntrxxi.c   407]
    [Thr 1352] JControlICheckProcessList: process server0 (pid:2276) died (STOPPING)
    [Thr 1352] JControlIResetProcess: reset process server0
    [Thr 1352] JControlCloseProgram: started (exitcode = 0)
    [Thr 3376] JControlMSMessageFunc: shutdown -> terminate message listener
    [Thr 3376] JControlMSMessageFunc: leave listener thread
    [Thr 1352] Wed May 07 14:22:34 2008
    [Thr 1352] JControlCloseProgram: good bye... (exitcode = -11111)
    Regards
    RandomStudent
    Edited by: RandomStudent on May 7, 2008 4:45 PM
    Edited by: RandomStudent on May 7, 2008 4:47 PM

    Hello Vijith, thanks for your answer.
    Installed a Sneak Preview of SAP NetWeaver 7.1 CE on Monday(5th May), but it failed.
    Deinstalled the 7.1 CE Software on Tuesday (6th May).
    Installed Sneak Preview of SAP Netweaver (2004s) 7.0 SP9 on Wednesday (7th May) and it was installed correctly, but i got the problem with the license check.
    So the Options are:
    Change the date on OS before starting the Software
    or
    Deinstalling the Software and installing SAP Netweaver (2004s) 7.0 SP9 SR 3 (which i downloaded this night). But i think i have to get the registry clean then. Are there Tools to clean the registry from all SAP entries?

  • How to install and configure configure IGS for J2EE server 700

    Hi,
    Please help me in installing and configuring IGS for J2EE server700 as i need it to run Business Graphics for my Web DynPro application. Earlier i had installed J2EE server 640 and i didnt have to do any separate installation for IGS. I just had to configure the IGS URL from Visual Admin. But i can't find any igswd.exe running on my J2EE700 engine.
    Please let me know the procedure for this.
    Thanks an Regards,
    Smriti.

    Hi,
    Check the below link,
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/17/86c039c7811f11e10000000a114084/frameset.htm">About IGS Configuration and Adminisatration</a>
    Regards,
    Suresh.T

  • Pros and cons of installing a local J2EE server

    Hi,
    We are about to start developing portal applications with Web Dynpro and will use NWDI (DTR/CBS/CMS). I would like to know what SAP recommends for team development, each developer installs a local J2EE server or they all deploy and test on a central server?
    From my past experiences, using only one central server can cause problems with debugging, deployment and collisions of a DC tested simultanously by two developers. Running a local server can solve these problems but this could be costly; first because PCs often don't have enough CPU/RAM to run it, and second to support all these complex installations.
    I have read Benny's two blogs and some SAP documentation but it is still not clear to me which option is best. If you have lived good or bad experiences with one or the other please let me know!
    Thanks,
    Martin

    I would strongly suggest you avoid having a single runtime environment for multiple developers.  The nature of Java development makes working in a runtime environment such as this very difficult.  It's far too easy to have multiple developers working on the same component making changes that result in different versions of the same component getting deployed to the same runtime environment.  Unless communication is very good, you're developers will end up clobbering each others changes.  Obviously not good, since the developers will spend time trying to debug problems which really don't exist!
    At the other end of the spectrum, each developer can have their own Java stack running locally on their desktop PC.  This was the solution that we first tested out, but due to the amount of virus scanning and the overall 'weight' of the other software tools on our desktop PC's, this didn't work too well - performance wasn't all that good.  It was also too easy for the developer to clobber their own environment by accidentally removing files, or by making changes to the configuration that would render their engine unusable.
    What we opted for was something in the middle: a dedicated multi-cpu system with lots of RAM that runs multiple J2EE instances, each of which is assigned to a single developer.  What you get from this sort of configuration is this: only a single operating system to patch when you are required to do upgrades; a controlled environment where the developer doesn't have file system access to the system (which they don't need anyways); if you're lucky, basis support to perform installation and patching duties.
    We've been using this environment for about a year now, and it works well.  I have full access to the J2EE container via the Visual Admin, and since the dev instances are configured as single server debuggable instances, I can restart the server via the Dev Studio with just two clicks.
    Hope that gives you an idea of another possible config.

  • NW2004sSP7_Preview J2EE Server error

    Hi,
    I am not able to start the J2ee server after install.
    Here is the trace file from the server.
    trc file: "C:\usr\sap\J2E\JC01\work\dev_server0", trc level: 1, release: "700"
    node name   : ID14203250
    pid         : 5668
    system name : J2E
    system nr.  : 01
    started at  : Sun May 14 14:24:29 2006
    arguments       :
           arg[00] : C:\usr\sap\J2E\JC01\exe\jlaunch.exe
           arg[01] : pf=C:\usr\sap\J2E\SYS\profile\J2E_JC01_TWCALA203437
           arg[02] : -DSAPINFO=J2E_01_server
           arg[03] : pf=C:\usr\sap\J2E\SYS\profile\J2E_JC01_TWCALA203437
    [Thr 5004] Sun May 14 14:24:29 2006
    [Thr 5004] *** WARNING => INFO: Unknown property [instance.box.number=J2EJC01twcala203437] [jstartxx.c   841]
    [Thr 5004] *** WARNING => INFO: Unknown property [instance.en.host=TWCALA203437] [jstartxx.c   841]
    [Thr 5004] *** WARNING => INFO: Unknown property [instance.en.port=3200] [jstartxx.c   841]
    [Thr 5004] *** WARNING => INFO: Unknown property [instance.system.id=1] [jstartxx.c   841]
    JStartupReadInstanceProperties: read instance properties [C:\usr\sap\J2E\JC01\j2ee\cluster\instance.properties]
    -> ms host    : TWCALA203437
    -> ms port    : 3900
    -> OS libs    : C:\usr\sap\J2E\JC01\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : normal
    -> run action : NONE
    -> enabled    : yes
    Used property files
    -> files [00] : C:\usr\sap\J2E\JC01\j2ee\cluster\instance.properties
    Instance properties
    -> ms host    : TWCALA203437
    -> ms port    : 3900
    -> os libs    : C:\usr\sap\J2E\JC01\j2ee\os_libs
    -> admin URL  :
    -> run mode   : normal
    -> run action : NONE
    -> enabled    : yes
    Bootstrap nodes
    -> [00] bootstrap            : C:\usr\sap\J2E\JC01\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID14203200 : C:\usr\sap\J2E\JC01\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID14203250 : C:\usr\sap\J2E\JC01\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID14203200           : C:\usr\sap\J2E\JC01\j2ee\cluster\instance.properties
    -> [01] ID14203250           : C:\usr\sap\J2E\JC01\j2ee\cluster\instance.properties
    [Thr 5004] Sun May 14 14:24:30 2006
    [Thr 5004] JLaunchRequestQueueInit: create named pipe for ipc
    [Thr 5004] JLaunchRequestQueueInit: create pipe listener thread
    [Thr 4616] JLaunchRequestFunc: Thread 4616 started as listener thread for np messages.
    [Thr 5672] WaitSyncSemThread: Thread 5672 started as semaphore monitor thread.
    [Thr 5004] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
    [Thr 5004] CPIC (version=700.2005.12.02)
    [Thr 5004] JStartupIReadSection: debug mode is specified by program arguments
    [Thr 5004] [Node: server0] java home is set by profile parameter
         Java Home: C:\j2sdk1.4.2_09
    [Thr 5004] JStartupICheckFrameworkPackage: can't find framework package C:\usr\sap\J2E\JC01\exe\jvmx.jar
    JStartupIReadSection: read node properties [ID14203250]
    -> node name          : server0
    -> node type          : server
    -> node execute       : yes
    -> jlaunch parameters :
    -> java path          : C:\j2sdk1.4.2_09
    -> java parameters    : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Djco.jarm=1 -verbose:gc -Djava.awt.headless=true -Dsun.io.useCanonCaches=false -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer -XX:NewSize=170m -XX:MaxNewSize=170m -XX:MaxPermSize=192m -XX:PermSize=192m -XX:DisableExplicitGC -XX:UseParNewGC -XX:PrintGCDetails -XX:PrintGCTimeStamps -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -XX:SoftRefLRUPolicyMSPerMB=1 -verbose:gc
    -> java vm version    : 1.4.2_09-b05
    -> java vm vendor     : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
    -> java vm type       : server
    -> java vm cpu        : x86
    -> heap size          : 1023M
    -> init heap size     : 1023M
    -> root path          : C:\usr\sap\J2E\JC01\j2ee\cluster\server0
    -> class path         : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> OS libs path       : C:\usr\sap\J2E\JC01\j2ee\os_libs
    -> main class         : com.sap.engine.boot.Start
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : C:\usr\sap\J2E\JC01\exe\jstartup.jar;C:\usr\sap\J2E\JC01\exe\jvmx.jar
    -> shutdown class     : com.sap.engine.boot.Start
    -> parameters         :
    -> debuggable         : yes
    -> debug mode         : yes
    -> debug port         : 50121
    -> shutdown timeout   : 120000
    [Thr 5004] JLaunchISetDebugMode: set debug mode [yes]
    [Thr 5696] JLaunchIStartFunc: Thread 5696 started as Java VM thread.
    JHVM_LoadJavaVM: VM Arguments of node [server0]
    -> stack   : 262144 Bytes
    -> arg[  0]: exit
    -> arg[  1]: abort
    -> arg[  2]: vfprintf
    -> arg[  3]: -Denv.class.path=.;C:\Program Files\QuickTime\QTSystem\QTJava.zip;C:\j2sdk1.4.2_09\jre\lib;C:\Program Files\SAP\JDT\eclipse\plugins\org.apache.ant_1.5.3
    -> arg[  4]: -Djava.security.policy=./java.policy
    -> arg[  5]: -Djava.security.egd=file:/dev/urandom
    -> arg[  6]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
    -> arg[  7]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
    -> arg[  8]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
    -> arg[  9]: -Djco.jarm=1
    -> arg[ 10]: -verbose:gc
    -> arg[ 11]: -Djava.awt.headless=true
    -> arg[ 12]: -Dsun.io.useCanonCaches=false
    -> arg[ 13]: -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer
    -> arg[ 14]: -XX:NewSize=170m
    -> arg[ 15]: -XX:MaxNewSize=170m
    -> arg[ 16]: -XX:MaxPermSize=192m
    -> arg[ 17]: -XX:PermSize=192m
    -> arg[ 18]: -XX:+DisableExplicitGC
    -> arg[ 19]: -XX:+UseParNewGC
    -> arg[ 20]: -XX:+PrintGCDetails
    -> arg[ 21]: -XX:+PrintGCTimeStamps
    -> arg[ 22]: -XX:SurvivorRatio=2
    -> arg[ 23]: -XX:TargetSurvivorRatio=90
    -> arg[ 24]: -XX:SoftRefLRUPolicyMSPerMB=1
    -> arg[ 25]: -verbose:gc
    -> arg[ 26]: -Dsys.global.dir=C:\usr\sap\J2E\SYS\global
    -> arg[ 27]: -Dapplication.home=C:\usr\sap\J2E\JC01\exe
    -> arg[ 28]: -Djava.class.path=C:\usr\sap\J2E\JC01\exe\jstartup.jar;C:\usr\sap\J2E\JC01\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> arg[ 29]: -Djava.library.path=C:\j2sdk1.4.2_09\jre\bin\server;C:\j2sdk1.4.2_09\jre\bin;C:\j2sdk1.4.2_09\bin;C:\usr\sap\J2E\JC01\j2ee\os_libs;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;C:\Program Files\ThinkPad\Utilities;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\QuickTime\QTSystem\;C:\j2sdk1.4.2_09\bin;C:\Program Files\Intel\Wireless\Bin\;C:\usr\sap\J2E\SYS\exe\uc\NTI386
    -> arg[ 30]: -Xdebug
    -> arg[ 31]: -Xnoagent
    -> arg[ 32]: -Djava.compiler=NONE
    -> arg[ 33]: -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=50121
    -> arg[ 34]: -Dmemory.manager=1023M
    -> arg[ 35]: -Xmx1023M
    -> arg[ 36]: -Xms1023M
    -> arg[ 37]: -DLoadBalanceRestricted=no
    -> arg[ 38]: -Djstartup.mode=JCONTROL
    -> arg[ 39]: -Djstartup.ownProcessId=5668
    -> arg[ 40]: -Djstartup.ownHardwareId=K0385668384
    -> arg[ 41]: -Djstartup.whoami=server
    -> arg[ 42]: -Djstartup.debuggable=yes
    -> arg[ 43]: -DSAPINFO=J2E_01_server
    -> arg[ 44]: -DSAPSTARTUP=1
    -> arg[ 45]: -DSAPSYSTEM=01
    -> arg[ 46]: -DSAPSYSTEMNAME=J2E
    -> arg[ 47]: -DSAPMYNAME=TWCALA203437_J2E_01
    -> arg[ 48]: -DSAPDBHOST=TWCALA203437
    -> arg[ 49]: -Dj2ee.dbhost=TWCALA203437
    Error occurred during initialization of VM
    Could not reserve enough space for object heap
    [Thr 5696] JLaunchIAbortJava: abort hook is called
    [Thr 5696] JLaunchCloseProgram: good bye (exitcode = -2)

    Hi,
    I have the same problem: the J2EE services do not start after installation,
    and reducing the heap size did not help!
    I have 3GB of RAM.
    This is my trace (please note the error code "exitcode = -11113"
    - what does it mean?):
    node name   : ID19941450
    pid         : 4944
    system name : X11
    system nr.  : 01
    started at  : Fri Jun 30 11:12:14 2006
    arguments       :
           arg[00] : C:\usr\sap\X11\DVEBMGS01\exe\jlaunch.exe
           arg[01] : pf=C:\usr\sap\X11\SYS\profile\X11_DVEBMGS01_testxi
           arg[02] : -DSAPINFO=X11_01_server
           arg[03] : pf=C:\usr\sap\X11\SYS\profile\X11_DVEBMGS01_testxi
           arg[04] : -DSAPSTART=1
           arg[05] : -DCONNECT_PORT=1058
           arg[06] : -DSAPSYSTEM=01
           arg[07] : -DSAPSYSTEMNAME=X11
           arg[08] : -DSAPMYNAME=testxi_X11_01
           arg[09] : -DSAPPROFILE=C:\usr\sap\X11\SYS\profile\X11_DVEBMGS01_testxi
           arg[10] : -DFRFC_FALLBACK=ON
           arg[11] : -DFRFC_FALLBACK_HOST=localhost
    [Thr 4948] Fri Jun 30 11:12:14 2006
    [Thr 4948] *** WARNING => INFO: Unknown property [instance.box.number=X11DVEBMGS01testxi] [jstartxx.c   841]
    [Thr 4948] *** WARNING => INFO: Unknown property [instance.en.host=testxi] [jstartxx.c   841]
    [Thr 4948] *** WARNING => INFO: Unknown property [instance.en.port=3200] [jstartxx.c   841]
    [Thr 4948] *** WARNING => INFO: Unknown property [instance.system.id=1] [jstartxx.c   841]
    JStartupReadInstanceProperties: read instance properties [C:\usr\sap\X11\DVEBMGS01\j2ee\cluster\instance.properties]
    -> ms host    : testxi
    -> ms port    : 3900
    -> OS libs    : C:\usr\sap\X11\DVEBMGS01\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Used property files
    -> files [00] : C:\usr\sap\X11\DVEBMGS01\j2ee\cluster\instance.properties
    Instance properties
    -> ms host    : testxi
    -> ms port    : 3900
    -> os libs    : C:\usr\sap\X11\DVEBMGS01\j2ee\os_libs
    -> admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Bootstrap nodes
    -> [00] bootstrap            : C:\usr\sap\X11\DVEBMGS01\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID19941400 : C:\usr\sap\X11\DVEBMGS01\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID19941450 : C:\usr\sap\X11\DVEBMGS01\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID19941400           : C:\usr\sap\X11\DVEBMGS01\j2ee\cluster\instance.properties
    -> [01] ID19941450           : C:\usr\sap\X11\DVEBMGS01\j2ee\cluster\instance.properties
    [Thr 4948] JLaunchRequestQueueInit: create named pipe for ipc
    [Thr 4948] JLaunchRequestQueueInit: create pipe listener thread
    [Thr 4952] JLaunchRequestFunc: Thread 4952 started as listener thread for np messages.
    [Thr 4960] WaitSyncSemThread: Thread 4960 started as semaphore monitor thread.
    [Thr 4948] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
    [Thr 4948] CPIC (version=700.2005.12.02)
    [Thr 4948] [Node: server0] java home is set by profile parameter
         Java Home: C:\j2sdk1.4.2_12
    [Thr 4948] JStartupICheckFrameworkPackage: can't find framework package C:\usr\sap\X11\DVEBMGS01\exe\jvmx.jar
    JStartupIReadSection: read node properties [ID19941450]
    -> node name          : server0
    -> node type          : server
    -> node execute       : yes
    -> jlaunch parameters :
    -> java path          : C:\j2sdk1.4.2_12
    -> java parameters    : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Dorg.xml.sax.driver=com.sap.engine.lib.xml.parser.SAXParser -Djco.jarm=1 -Dsun.io.useCanonCaches=false -XX:NewSize=170m -XX:MaxNewSize=170m -XX:MaxPermSize=256m -Djava.awt.headless=true -XX:PermSize=256m -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -XX:SoftRefLRUPolicyMSPerMB=1 -verbose:gc -XX:DisableExplicitGC -XX:PrintGCDetails -XX:PrintGCTimeStamps -XX:UseParNewGC -Drdbms.driverLocation=C:/sapdb/programs/runtime/jar/sapdbc.jar
    -> java vm version    : 1.4.2_12-b03
    -> java vm vendor     : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
    -> java vm type       : server
    -> java vm cpu        : x86
    -> heap size          : 512M
    -> init heap size     : 512M
    -> root path          : C:\usr\sap\X11\DVEBMGS01\j2ee\cluster\server0
    -> class path         : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> OS libs path       : C:\usr\sap\X11\DVEBMGS01\j2ee\os_libs
    -> main class         : com.sap.engine.boot.Start
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : C:\usr\sap\X11\DVEBMGS01\exe\jstartup.jar;C:\usr\sap\X11\DVEBMGS01\exe\jvmx.jar
    -> shutdown class     : com.sap.engine.boot.Start
    -> parameters         :
    -> debuggable         : no
    -> debug mode         : no
    -> debug port         : 50121
    -> shutdown timeout   : 120000
    [Thr 4948] JLaunchISetDebugMode: set debug mode [no]
    [Thr 4492] JLaunchIStartFunc: Thread 4492 started as Java VM thread.
    JHVM_LoadJavaVM: VM Arguments of node [server0]
    -> stack   : 262144 Bytes
    -> arg[  0]: exit
    -> arg[  1]: abort
    -> arg[  2]: vfprintf
    -> arg[  3]: -Djava.security.policy=./java.policy
    -> arg[  4]: -Djava.security.egd=file:/dev/urandom
    -> arg[  5]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
    -> arg[  6]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
    -> arg[  7]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
    -> arg[  8]: -Dorg.xml.sax.driver=com.sap.engine.lib.xml.parser.SAXParser
    -> arg[  9]: -Djco.jarm=1
    -> arg[ 10]: -Dsun.io.useCanonCaches=false
    -> arg[ 11]: -XX:NewSize=170m
    -> arg[ 12]: -XX:MaxNewSize=170m
    -> arg[ 13]: -XX:MaxPermSize=256m
    -> arg[ 14]: -Djava.awt.headless=true
    -> arg[ 15]: -XX:PermSize=256m
    -> arg[ 16]: -XX:SurvivorRatio=2
    -> arg[ 17]: -XX:TargetSurvivorRatio=90
    -> arg[ 18]: -XX:SoftRefLRUPolicyMSPerMB=1
    -> arg[ 19]: -verbose:gc
    -> arg[ 20]: -XX:+DisableExplicitGC
    -> arg[ 21]: -XX:+PrintGCDetails
    -> arg[ 22]: -XX:+PrintGCTimeStamps
    -> arg[ 23]: -XX:+UseParNewGC
    -> arg[ 24]: -Drdbms.driverLocation=C:/sapdb/programs/runtime/jar/sapdbc.jar
    -> arg[ 25]: -Dsys.global.dir=C:\usr\sap\X11\SYS\global
    -> arg[ 26]: -Dapplication.home=C:\usr\sap\X11\DVEBMGS01\exe
    -> arg[ 27]: -Djava.class.path=C:\usr\sap\X11\DVEBMGS01\exe\jstartup.jar;C:\usr\sap\X11\DVEBMGS01\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> arg[ 28]: -Djava.library.path=C:\j2sdk1.4.2_12\jre\bin\server;C:\j2sdk1.4.2_12\jre\bin;C:\j2sdk1.4.2_12\bin;C:\usr\sap\X11\DVEBMGS01\j2ee\os_libs;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\usr\sap\X11\SYS\exe\uc\NTI386
    -> arg[ 29]: -Dmemory.manager=512M
    -> arg[ 30]: -Xmx512M
    -> arg[ 31]: -Xms512M
    -> arg[ 32]: -DLoadBalanceRestricted=no
    -> arg[ 33]: -Djstartup.mode=JCONTROL
    -> arg[ 34]: -Djstartup.ownProcessId=4944
    -> arg[ 35]: -Djstartup.ownHardwareId=B0489370142
    -> arg[ 36]: -Djstartup.whoami=server
    -> arg[ 37]: -Djstartup.debuggable=no
    -> arg[ 38]: -DSAPINFO=X11_01_server
    -> arg[ 39]: -DSAPSTART=1
    -> arg[ 40]: -DCONNECT_PORT=1058
    -> arg[ 41]: -DSAPSYSTEM=01
    -> arg[ 42]: -DSAPSYSTEMNAME=X11
    -> arg[ 43]: -DSAPMYNAME=testxi_X11_01
    -> arg[ 44]: -DSAPPROFILE=C:\usr\sap\X11\SYS\profile\X11_DVEBMGS01_testxi
    -> arg[ 45]: -DFRFC_FALLBACK=ON
    -> arg[ 46]: -DFRFC_FALLBACK_HOST=localhost
    -> arg[ 47]: -DSAPSTARTUP=1
    -> arg[ 48]: -DSAPSYSTEM=01
    -> arg[ 49]: -DSAPSYSTEMNAME=X11
    -> arg[ 50]: -DSAPMYNAME=testxi_X11_01
    -> arg[ 51]: -DSAPDBHOST=testxi
    -> arg[ 52]: -Dj2ee.dbhost=testxi
    CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
    CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
    CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
    CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
    CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
    CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
    CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
    [Thr 4492] JHVM_LoadJavaVM: Java VM created OK.
    JHVM_BuildArgumentList: main method arguments of node [server0]
    [Thr 5028] Fri Jun 30 11:12:16 2006
    [Thr 5028] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
    [Thr 5028] Fri Jun 30 11:12:17 2006
    [Thr 5028] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
    [Thr 5028] JLaunchISetClusterId: set cluster id 19941450
    [Thr 5028] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
    [Thr 5028] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
    Fri Jun 30 11:12:20 2006
    0.000: [GC 0.000: [ParNew: 87039K->2301K(130560K), 0.0361967 secs] 87039K->2301K(480768K), 0.0365311 secs]
    Fri Jun 30 11:12:30 2006
    10.462: [GC 10.462: [ParNew: 89341K->6046K(130560K), 0.0395094 secs] 89341K->6046K(480768K), 0.0396748 secs]
    Fri Jun 30 11:12:37 2006
    17.296: [GC 17.296: [ParNew: 93086K->12485K(130560K), 0.0808105 secs] 93086K->12485K(480768K), 0.0809729 secs]
    Fri Jun 30 11:12:46 2006
    26.032: [GC 26.032: [ParNew: 99524K->15336K(130560K), 0.0757925 secs] 99524K->15336K(480768K), 0.0759567 secs]
    [Thr 5372] Fri Jun 30 11:12:51 2006
    [Thr 5372] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
    [Thr 5372] JHVM_RegisterNatives: registering methods in com.sap.i18n.cp.ConverterJNI
    [Thr 5000] Fri Jun 30 11:12:52 2006
    [Thr 5000] JLaunchIExitJava: exit hook is called (rc = -11113)
    [Thr 5000] JLaunchCloseProgram: good bye (exitcode = -11113)

  • J2EE server doesn't start; jcontrol not starting

    Hello guys,
    My installation: NW4 SR1 / Windows 2000 Advanced Server and EP 6.0 SR1, 2GB RAM.
    My SAP J2EE Engine - Config Tool(cluster-data/Instance_ID258376/dispatcher_ID25837600)
    Max heap size 80
    Java Parameters
    -Djava.security.policy=.\java.policy
    -Djava.security.egd=file:/dev/urandom
    -Djco.jarm=1
    -XX:NewSize=28m
    -XX:MaxNewSize=28m
    -XX:+DisableExplicitGC
    -Xms170m
    My SAP J2EE Engine - Config Tool(cluster-data/Instance_ID258376/server_ID25837650)
    Max heap size 1000
    Java Parameters
    -Djava.security.policy=./java.policy
    -Djava.security.egd=file:/dev/urandom
    -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
    -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
    -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
    -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer
    -Djco.jarm=1
    -Dsun.io.useCanonCaches=false
    -Djava.awt.headless=true
    -XX:SoftRefLRUPolicyMSPerMB=1
    -verbose:gc
    -XX:+PrintGCDetails
    -XX:+PrintGCTimeStamps
    -XX:+UseParNewGC
    -Xms512M
    -Xms256M
    -Xmx256M
    -XX:MaxNewSize=128M
    -XX:NewSize=128M
    -XX:+DisableExplicitGC
    -XX:MaxPermSize=192M
    -XX:PermSize=192M
    -XX:SurvivorRatio=2
    -XX:TargetSurvivorRatio=90
    When I try to start J2EE server instance on SAP Management Console i get the following trace response:
    trc file: "D:\usr\sap\J2E\JC02\work\dev_jcontrol", trc level: 1, release: "640"
    node name   : jcontrol
    pid         : 4892
    system name : J2E
    system nr.  : 02
    started at  : Thu Sep 01 19:01:19 2005
    arguments   :
        arg[00] : D:\usr\sap\J2E\JC02\j2ee\os_libs\jcontrol.exe
        arg[01] : pf=D:\usr\sap\J2E\SYS\profile\J2E_JC02_IUSMXREVAPO01
    [Thr 5176] Thu Sep 01 19:01:19 2005
    [Thr 5176] *** ERROR => Invalid property value [box.number/J2EJC02IUSMXREVAPO01] [jstartxx.c   789]
    [Thr 5176] *** ERROR => Invalid property value [system.id/2] [jstartxx.c   789]
    JStartupReadInstanceProperties: read instance properties [D:\usr\sap\J2E\JC02\j2ee\cluster\instance.properties;D:\usr\sap\J2E\JC02\SDM\program\config\sdm_jstartup.properties]
    -> ms host    : IUSMXREVAPO01
    -> ms port    : 3601
    -> OS libs    : D:\usr\sap\J2E\JC02\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Used property files
    -> files [00] : D:\usr\sap\J2E\JC02\j2ee\cluster\instance.properties
    -> files [01] : D:\usr\sap\J2E\JC02\SDM\program\config\sdm_jstartup.properties
    Instance properties
    -> ms host    : IUSMXREVAPO01
    -> ms port    : 3601
    -> os libs    : D:\usr\sap\J2E\JC02\j2ee\os_libs
    -> admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Bootstrap nodes
    -> [00] bootstrap            : D:\usr\sap\J2E\JC02\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID25837600 : D:\usr\sap\J2E\JC02\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID25837650 : D:\usr\sap\J2E\JC02\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID25837600           : D:\usr\sap\J2E\JC02\j2ee\cluster\instance.properties
    -> [01] ID25837650           : D:\usr\sap\J2E\JC02\j2ee\cluster\instance.properties
    -> [02] sdm                  : D:\usr\sap\J2E\JC02\SDM\program\config\sdm_jstartup.properties
    [Thr 5176] JControlExecuteBootstrap: execute bootstrap process [bootstrap]
    [Thr 5176] [Node: bootstrap] java home is set by profile parameter
         Java Home: C:\j2sdk1.4.2_08
    JStartupIReadSection: read node properties [bootstrap]
    -> node name       : bootstrap
    -> node type       : bootstrap
    -> java path       : C:\j2sdk1.4.2_08
    -> java parameters : -Djco.jarm=1 -Djco.jarm=1 -Djco.jarm=1
    -> java vm version : 1.4.2_08-b03
    -> java vm vendor  : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
    -> java vm type    : server
    -> java vm cpu     : x86
    -> heap size       : 512M
    -> root path       : D:\usr\sap\J2E\JC02\j2ee\cluster
    -> class path      : .\bootstrap\launcher.jar
    -> OS libs path    : D:\usr\sap\J2E\JC02\j2ee\os_libs
    -> main class      : com.sap.engine.offline.OfflineToolStart
    -> framework class : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class  : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path  : D:\usr\sap\J2E\JC02\j2ee\os_libs\jstartup.jar
    -> parameters      : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID0258376
    -> debuggable      : yes
    -> debug mode      : no
    -> debug port      : 60000
    -> shutdown timeout: 120000
    JStartupStartJLaunch: program = D:\usr\sap\J2E\JC02/j2ee/os_libs/jlaunch.exe
    -> arg[00] = D:\usr\sap\J2E\JC02/j2ee/os_libs/jlaunch.exe
    -> arg[01] = pf=D:\usr\sap\J2E\SYS\profile\J2E_JC02_IUSMXREVAPO01
    -> arg[02] = -DSAPINFO=J2E_02_bootstrap
    -> arg[03] = -file=D:\usr\sap\J2E\JC02\j2ee\cluster\instance.properties
    -> arg[04] = -nodeName=bootstrap
    -> arg[05] = -nodeId=-1
    -> arg[06] = -syncSem=JSTARTUP_WAIT_ON_4892
    -> arg[07] = -jvmOutFile=D:\usr\sap\J2E\JC02\work\jvm_bootstrap.out
    -> arg[08] = -stdOutFile=D:\usr\sap\J2E\JC02\work\std_bootstrap.out
    -> arg[09] = -locOutFile=D:\usr\sap\J2E\JC02\work\dev_bootstrap
    -> arg[10] = -mode=BOOTSTRAP
    -> arg[11] = pf=D:\usr\sap\J2E\SYS\profile\J2E_JC02_IUSMXREVAPO01
    -> lib path = PATH=C:\j2sdk1.4.2_08\jre\bin\server;C:\j2sdk1.4.2_08\jre\bin;f:\sapdb\programs\bin;f:\sapdb\programs\pgm;F:\usr\sap\Python\.;D:\orant\bin;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem;C:\Program Files\Symantec\pcAnywhere\;C:\j2sdk1.4.2_08\bin;C:\Program Files\Microsoft SQL Server\80\Tools\BINN;F:\jdom-1.0\build\jdom.jar;D:\usr\sap\J2E\SCS01\exe;D:\usr\sap\J2E\JC02\exe;D:\usr\sap\J2E\SYS\exe\run
    -> exe path = PATH=C:\j2sdk1.4.2_08\bin;D:\usr\sap\J2E\JC02\j2ee\os_libs;f:\sapdb\programs\bin;f:\sapdb\programs\pgm;F:\usr\sap\Python\.;D:\orant\bin;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem;C:\Program Files\Symantec\pcAnywhere\;C:\j2sdk1.4.2_08\bin;C:\Program Files\Microsoft SQL Server\80\Tools\BINN;F:\jdom-1.0\build\jdom.jar;D:\usr\sap\J2E\SCS01\exe;D:\usr\sap\J2E\JC02\exe;D:\usr\sap\J2E\SYS\exe\run
    [Thr 5176] Thu Sep 01 19:01:25 2005
    [Thr 5176] JControlExecuteBootstrap: read instance values after global bootstrap
    [Thr 5176] *** ERROR => Invalid property value [box.number/J2EJC02IUSMXREVAPO01] [jstartxx.c   789]
    [Thr 5176] *** ERROR => Invalid property value [system.id/2] [jstartxx.c   789]
    JStartupReadInstanceProperties: read instance properties [D:\usr\sap\J2E\JC02\j2ee\cluster\instance.properties;D:\usr\sap\J2E\JC02\SDM\program\config\sdm_jstartup.properties]
    -> ms host    : IUSMXREVAPO01
    -> ms port    : 3601
    -> OS libs    : D:\usr\sap\J2E\JC02\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    [Thr 5176] JControlExecuteBootstrap: enumerate the nodes after global bootstrap
    Used property files
    -> files [00] : D:\usr\sap\J2E\JC02\j2ee\cluster\instance.properties
    -> files [01] : D:\usr\sap\J2E\JC02\SDM\program\config\sdm_jstartup.properties
    Instance properties
    -> ms host    : IUSMXREVAPO01
    -> ms port    : 3601
    -> os libs    : D:\usr\sap\J2E\JC02\j2ee\os_libs
    -> admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Bootstrap nodes
    -> [00] bootstrap            : D:\usr\sap\J2E\JC02\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID25837600 : D:\usr\sap\J2E\JC02\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID25837650 : D:\usr\sap\J2E\JC02\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID25837600           : D:\usr\sap\J2E\JC02\j2ee\cluster\instance.properties
    -> [01] ID25837650           : D:\usr\sap\J2E\JC02\j2ee\cluster\instance.properties
    -> [02] sdm                  : D:\usr\sap\J2E\JC02\SDM\program\config\sdm_jstartup.properties
    [Thr 5176] JControlExecuteBootstrap: execute bootstrap process [bootstrap_ID25837600]
    [Thr 5176] INFO: Invalid property value [JLaunchParameters/]
    [Thr 5176] [Node: dispatcher bootstrap] java home is set by profile parameter
         Java Home: C:\j2sdk1.4.2_08
    JStartupIReadSection: read node properties [bootstrap_ID25837600]
    -> node name       : dispatcher bootstrap
    -> node type       : bootstrap
    -> java path       : C:\j2sdk1.4.2_08
    -> java parameters : -Djco.jarm=1 -Djco.jarm=1
    -> java vm version : 1.4.2_08-b03
    -> java vm vendor  : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
    -> java vm type    : server
    -> java vm cpu     : x86
    -> heap size       : 170M
    -> root path       : D:\usr\sap\J2E\JC02\j2ee\cluster
    -> class path      : .\bootstrap\launcher.jar
    -> OS libs path    : D:\usr\sap\J2E\JC02\j2ee\os_libs
    -> main class      : com.sap.engine.offline.OfflineToolStart
    -> framework class : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class  : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path  : D:\usr\sap\J2E\JC02\j2ee\os_libs\jstartup.jar
    -> parameters      : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID025837600
    -> debuggable      : yes
    -> debug mode      : no
    -> debug port      : 60000
    -> shutdown timeout: 120000
    JStartupStartJLaunch: program = D:\usr\sap\J2E\JC02/j2ee/os_libs/jlaunch.exe
    -> arg[00] = D:\usr\sap\J2E\JC02/j2ee/os_libs/jlaunch.exe
    -> arg[01] = pf=D:\usr\sap\J2E\SYS\profile\J2E_JC02_IUSMXREVAPO01
    -> arg[02] = -DSAPINFO=J2E_02_bootstrap
    -> arg[03] = -file=D:\usr\sap\J2E\JC02\j2ee\cluster\instance.properties
    -> arg[04] = -nodeName=bootstrap_ID25837600
    -> arg[05] = -nodeId=-1
    -> arg[06] = -syncSem=JSTARTUP_WAIT_ON_4892
    -> arg[07] = -jvmOutFile=D:\usr\sap\J2E\JC02\work\jvm_bootstrap_ID25837600.out
    -> arg[08] = -stdOutFile=D:\usr\sap\J2E\JC02\work\std_bootstrap_ID25837600.out
    -> arg[09] = -locOutFile=D:\usr\sap\J2E\JC02\work\dev_bootstrap_ID25837600
    -> arg[10] = -mode=BOOTSTRAP
    -> arg[11] = pf=D:\usr\sap\J2E\SYS\profile\J2E_JC02_IUSMXREVAPO01
    -> lib path = PATH=C:\j2sdk1.4.2_08\jre\bin\server;C:\j2sdk1.4.2_08\jre\bin;f:\sapdb\programs\bin;f:\sapdb\programs\pgm;F:\usr\sap\Python\.;D:\orant\bin;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem;C:\Program Files\Symantec\pcAnywhere\;C:\j2sdk1.4.2_08\bin;C:\Program Files\Microsoft SQL Server\80\Tools\BINN;F:\jdom-1.0\build\jdom.jar;D:\usr\sap\J2E\SCS01\exe;D:\usr\sap\J2E\JC02\exe;D:\usr\sap\J2E\SYS\exe\run
    -> exe path = PATH=C:\j2sdk1.4.2_08\bin;D:\usr\sap\J2E\JC02\j2ee\os_libs;f:\sapdb\programs\bin;f:\sapdb\programs\pgm;F:\usr\sap\Python\.;D:\orant\bin;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem;C:\Program Files\Symantec\pcAnywhere\;C:\j2sdk1.4.2_08\bin;C:\Program Files\Microsoft SQL Server\80\Tools\BINN;F:\jdom-1.0\build\jdom.jar;D:\usr\sap\J2E\SCS01\exe;D:\usr\sap\J2E\JC02\exe;D:\usr\sap\J2E\SYS\exe\run
    [Thr 5176] Thu Sep 01 19:01:31 2005
    [Thr 5176] JControlExecuteBootstrap: execute bootstrap process [bootstrap_ID25837650]
    [Thr 5176] INFO: Invalid property value [JLaunchParameters/]
    [Thr 5176] [Node: server0 bootstrap] java home is set by profile parameter
         Java Home: C:\j2sdk1.4.2_08
    JStartupIReadSection: read node properties [bootstrap_ID25837650]
    -> node name       : server0 bootstrap
    -> node type       : bootstrap
    -> java path       : C:\j2sdk1.4.2_08
    -> java parameters : -Djco.jarm=1 -Djco.jarm=1
    -> java vm version : 1.4.2_08-b03
    -> java vm vendor  : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
    -> java vm type    : server
    -> java vm cpu     : x86
    -> heap size       : 512M
    -> root path       : D:\usr\sap\J2E\JC02\j2ee\cluster
    -> class path      : .\bootstrap\launcher.jar
    -> OS libs path    : D:\usr\sap\J2E\JC02\j2ee\os_libs
    -> main class      : com.sap.engine.offline.OfflineToolStart
    -> framework class : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class  : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path  : D:\usr\sap\J2E\JC02\j2ee\os_libs\jstartup.jar
    -> parameters      : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID025837650
    -> debuggable      : yes
    -> debug mode      : no
    -> debug port      : 60000
    -> shutdown timeout: 120000
    JStartupStartJLaunch: program = D:\usr\sap\J2E\JC02/j2ee/os_libs/jlaunch.exe
    -> arg[00] = D:\usr\sap\J2E\JC02/j2ee/os_libs/jlaunch.exe
    -> arg[01] = pf=D:\usr\sap\J2E\SYS\profile\J2E_JC02_IUSMXREVAPO01
    -> arg[02] = -DSAPINFO=J2E_02_bootstrap
    -> arg[03] = -file=D:\usr\sap\J2E\JC02\j2ee\cluster\instance.properties
    -> arg[04] = -nodeName=bootstrap_ID25837650
    -> arg[05] = -nodeId=-1
    -> arg[06] = -syncSem=JSTARTUP_WAIT_ON_4892
    -> arg[07] = -jvmOutFile=D:\usr\sap\J2E\JC02\work\jvm_bootstrap_ID25837650.out
    -> arg[08] = -stdOutFile=D:\usr\sap\J2E\JC02\work\std_bootstrap_ID25837650.out
    -> arg[09] = -locOutFile=D:\usr\sap\J2E\JC02\work\dev_bootstrap_ID25837650
    -> arg[10] = -mode=BOOTSTRAP
    -> arg[11] = pf=D:\usr\sap\J2E\SYS\profile\J2E_JC02_IUSMXREVAPO01
    -> lib path = PATH=C:\j2sdk1.4.2_08\jre\bin\server;C:\j2sdk1.4.2_08\jre\bin;f:\sapdb\programs\bin;f:\sapdb\programs\pgm;F:\usr\sap\Python\.;D:\orant\bin;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem;C:\Program Files\Symantec\pcAnywhere\;C:\j2sdk1.4.2_08\bin;C:\Program Files\Microsoft SQL Server\80\Tools\BINN;F:\jdom-1.0\build\jdom.jar;D:\usr\sap\J2E\SCS01\exe;D:\usr\sap\J2E\JC02\exe;D:\usr\sap\J2E\SYS\exe\run
    -> exe path = PATH=C:\j2sdk1.4.2_08\bin;D:\usr\sap\J2E\JC02\j2ee\os_libs;f:\sapdb\programs\bin;f:\sapdb\programs\pgm;F:\usr\sap\Python\.;D:\orant\bin;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem;C:\Program Files\Symantec\pcAnywhere\;C:\j2sdk1.4.2_08\bin;C:\Program Files\Microsoft SQL Server\80\Tools\BINN;F:\jdom-1.0\build\jdom.jar;D:\usr\sap\J2E\SCS01\exe;D:\usr\sap\J2E\JC02\exe;D:\usr\sap\J2E\SYS\exe\run
    [Thr 5176] Thu Sep 01 19:01:38 2005
    [Thr 5176] JControlIBuildProcessList: Maximum error count is set to 4
    [Thr 5008] JControlRequestFunc: Thread 5008 started as listener thread for np messages.
    [Thr 5176] INFO: Invalid property value [JLaunchParameters/]
    [Thr 5176] [Node: dispatcher] java home is set by profile parameter
         Java Home: C:\j2sdk1.4.2_08
    JStartupIReadSection: read node properties [ID25837600]
    -> node name       : dispatcher
    -> node type       : dispatcher
    -> java path       : C:\j2sdk1.4.2_08
    -> java parameters : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Djco.jarm=1 -Drdbms.driverLocation=f:/sapdb/programs/runtime/jar/sapdbc.jar -Dsys.global.dir=D:/usr/sap/J2E/SYS/global -XX:NewSize=28m -XX:MaxNewSize=28m -XX:+DisableExplicitGC
    -> java vm version : 1.4.2_08-b03
    -> java vm vendor  : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
    -> java vm type    : server
    -> java vm cpu     : x86
    -> heap size       : 170M
    -> init heap size  : 170M
    -> root path       : D:\usr\sap\J2E\JC02\j2ee\cluster\dispatcher
    -> class path      : .\bin\boot\boot.jar;.\bin\system\bytecode.jar;.
    -> OS libs path    : D:\usr\sap\J2E\JC02\j2ee\os_libs
    -> main class      : com.sap.engine.boot.Start
    -> framework class : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class  : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path  : D:\usr\sap\J2E\JC02\j2ee\os_libs\jstartup.jar
    -> parameters      :
    -> debuggable      : no
    -> debug mode      : no
    -> debug port      : 60000
    -> shutdown timeout: 120000
    [Thr 5176] INFO: Invalid property value [JLaunchParameters/]
    [Thr 5176] [Node: server0] java home is set by profile parameter
         Java Home: C:\j2sdk1.4.2_08
    JStartupIReadSection: read node properties [ID25837650]
    -> node name       : server0
    -> node type       : server
    -> java path       : C:\j2sdk1.4.2_08
    -> java parameters : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer -Djco.jarm=1 -Dsun.io.useCanonCaches=false -Djava.awt.headless=true -verbose:gc -Drdbms.driverLocation=f:/sapdb/programs/runtime/jar/sapdbc.jar -Dsys.global.dir=D:/usr/sap/J2E/SYS/global -XX:NewSize=85m -XX:MaxNewSize=85m -XX:MaxPermSize=192m -XX:PermSize=192m -XX:DisableExplicitGC -XX:UseParNewGC -XX:PrintGCDetails -XX:PrintGCTimeStamps -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -XX:SoftRefLRUPolicyMSPerMB=1 -verbose:gc
    -> java vm version : 1.4.2_08-b03
    -> java vm vendor  : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
    -> java vm type    : server
    -> java vm cpu     : x86
    -> heap size       : 512M
    -> init heap size  : 512M
    -> root path       : D:\usr\sap\J2E\JC02\j2ee\cluster\server0
    -> class path      : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.C:\j2sdk1.4.2_08\jre\lib\ext\xml.jar;.C:\j2sdk1.4.2_08\jre\lib\TestXmlBean.jar;.
    -> OS libs path    : D:\usr\sap\J2E\JC02\j2ee\os_libs
    -> main class      : com.sap.engine.boot.Start
    -> framework class : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class  : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path  : D:\usr\sap\J2E\JC02\j2ee\os_libs\jstartup.jar
    -> parameters      :
    -> debuggable      : no
    -> debug mode      : no
    -> debug port      : 50221
    -> shutdown timeout: 120000
    [Thr 5176] [Node: SDM] java home is set by profile parameter
         Java Home: C:\j2sdk1.4.2_08
    JStartupIReadSection: read node properties [sdm]
    -> node name       : SDM
    -> node type       : sdm
    -> java path       : C:\j2sdk1.4.2_08
    -> java parameters :
    -> java vm version : 1.4.2_08-b03
    -> java vm vendor  : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
    -> java vm type    : server
    -> java vm cpu     : x86
    -> heap size       : 128M
    -> root path       : D:\usr\sap\J2E\JC02\SDM\program
    -> class path      : D:\usr\sap\J2E\JC02\SDM\program\bin\SDM.jar
    -> OS libs path    : D:\usr\sap\J2E\JC02\j2ee\os_libs
    -> main class      : SDMInternal
    -> framework class : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class  : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path  : D:\usr\sap\J2E\JC02\j2ee\os_libs\jstartup.jar
    -> shutdown class  : com.sap.sdm.jstartup.shutdown.InternalShutDown
    -> parameters      : server sdmhome=D:\usr\sap/J2E/JC02/SDM/program
    -> debuggable      : yes
    -> debug mode      : no
    -> debug port      : 60000
    -> shutdown timeout: 120000
    [Thr 5176] JControlMSConnect: attached to message server (IUSMXREVAPO01/3601)
    JStartupStartJLaunch: program = D:\usr\sap\J2E\JC02/j2ee/os_libs/jlaunch.exe
    -> arg[00] = D:\usr\sap\J2E\JC02/j2ee/os_libs/jlaunch.exe
    -> arg[01] = pf=D:\usr\sap\J2E\SYS\profile\J2E_JC02_IUSMXREVAPO01
    -> arg[02] = -DSAPINFO=J2E_02_dispatcher
    -> arg[03[Thr 5820] JControlMSMessageFunc: Thread 5820 started as listener thread for ms messages.
    ] = -file=D:\usr\sap\J2E\JC02\j2ee\cluster\instance.properties
    -> arg[04] = -nodeName=ID25837600
    -> arg[05] = -nodeId=0
    -> arg[06] = -syncSem=JSTARTUP_WAIT_ON_4892
    -> arg[07] = -jvmOutFile=D:\usr\sap\J2E\JC02\work\jvm_dispatcher.out
    -> arg[08] = -stdOutFile=D:\usr\sap\J2E\JC02\work\std_dispatcher.out
    -> arg[09] = -locOutFile=D:\usr\sap\J2E\JC02\work\dev_dispatcher
    -> arg[10] = -mode=JCONTROL
    -> arg[11] = pf=D:\usr\sap\J2E\SYS\profile\J2E_JC02_IUSMXREVAPO01
    -> lib path = PATH=C:\j2sdk1.4.2_08\jre\bin\server;C:\j2sdk1.4.2_08\jre\bin;f:\sapdb\programs\bin;f:\sapdb\programs\pgm;F:\usr\sap\Python\.;D:\orant\bin;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem;C:\Program Files\Symantec\pcAnywhere\;C:\j2sdk1.4.2_08\bin;C:\Program Files\Microsoft SQL Server\80\Tools\BINN;F:\jdom-1.0\build\jdom.jar;D:\usr\sap\J2E\SCS01\exe;D:\usr\sap\J2E\JC02\exe;D:\usr\sap\J2E\SYS\exe\run
    -> exe path = PATH=C:\j2sdk1.4.2_08\bin;D:\usr\sap\J2E\JC02\j2ee\os_libs;f:\sapdb\programs\bin;f:\sapdb\programs\pgm;F:\usr\sap\Python\.;D:\orant\bin;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem;C:\Program Files\Symantec\pcAnywhere\;C:\j2sdk1.4.2_08\bin;C:\Program Files\Microsoft SQL Server\80\Tools\BINN;F:\jdom-1.0\build\jdom.jar;D:\usr\sap\J2E\SCS01\exe;D:\usr\sap\J2E\JC02\exe;D:\usr\sap\J2E\SYS\exe\run
    [Thr 5176] JControlICheckProcessList: process dispatcher started (PID:5768)
    JStartupStartJLaunch: program = D:\usr\sap\J2E\JC02/j2ee/os_libs/jlaunch.exe
    -> arg[00] = D:\usr\sap\J2E\JC02/j2ee/os_libs/jlaunch.exe
    -> arg[01] = pf=D:\usr\sap\J2E\SYS\profile\J2E_JC02_IUSMXREVAPO01
    -> arg[02] = -DSAPINFO=J2E_02_server
    -> arg[03] = -file=D:\usr\sap\J2E\JC02\j2ee\cluster\instance.properties
    -> arg[04] = -nodeName=ID25837650
    -> arg[05] = -nodeId=1
    -> arg[06] = -syncSem=JSTARTUP_WAIT_ON_4892
    -> arg[07] = -locOutFile=D:\usr\sap\J2E\JC02\work\dev_server0
    -> arg[08] = -mode=JCONTROL
    -> arg[09] = pf=D:\usr\sap\J2E\SYS\profile\J2E_JC02_IUSMXREVAPO01
    -> lib path = PATH=C:\j2sdk1.4.2_08\jre\bin\server;C:\j2sdk1.4.2_08\jre\bin;f:\sapdb\programs\bin;f:\sapdb\programs\pgm;F:\usr\sap\Python\.;D:\orant\bin;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem;C:\Program Files\Symantec\pcAnywhere\;C:\j2sdk1.4.2_08\bin;C:\Program Files\Microsoft SQL Server\80\Tools\BINN;F:\jdom-1.0\build\jdom.jar;D:\usr\sap\J2E\SCS01\exe;D:\usr\sap\J2E\JC02\exe;D:\usr\sap\J2E\SYS\exe\run
    -> exe path = PATH=C:\j2sdk1.4.2_08\bin;D:\usr\sap\J2E\JC02\j2ee\os_libs;f:\sapdb\programs\bin;f:\sapdb\programs\pgm;F:\usr\sap\Python\.;D:\orant\bin;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem;C:\Program Files\Symantec\pcAnywhere\;C:\j2sdk1.4.2_08\bin;C:\Program Files\Microsoft SQL Server\80\Tools\BINN;F:\jdom-1.0\build\jdom.jar;D:\usr\sap\J2E\SCS01\exe;D:\usr\sap\J2E\JC02\exe;D:\usr\sap\J2E\SYS\exe\run
    [Thr 5176] JControlICheckProcessList: process server0 started (PID:5076)
    JStartupStartJLaunch: program = D:\usr\sap\J2E\JC02/j2ee/os_libs/jlaunch.exe
    -> arg[00] = D:\usr\sap\J2E\JC02/j2ee/os_libs/jlaunch.exe
    -> arg[01] = pf=D:\usr\sap\J2E\SYS\profile\J2E_JC02_IUSMXREVAPO01
    -> arg[02] = -DSAPINFO=J2E_02_sdm
    -> arg[03] = -file=D:\usr\sap\J2E\JC02\SDM\program\config\sdm_jstartup.properties
    -> arg[04] = -nodeName=sdm
    -> arg[05] = -nodeId=2
    -> arg[06] = -syncSem=JSTARTUP_WAIT_ON_4892
    -> arg[07] = -jvmOutFile=D:\usr\sap\J2E\JC02\work\jvm_sdm.out
    -> arg[08] = -stdOutFile=D:\usr\sap\J2E\JC02\work\std_sdm.out
    -> arg[09] = -locOutFile=D:\usr\sap\J2E\JC02\work\dev_sdm
    -> arg[10] = -mode=JCONTROL
    -> arg[11] = pf=D:\usr\sap\J2E\SYS\profile\J2E_JC02_IUSMXREVAPO01
    -> lib path = PATH=C:\j2sdk1.4.2_08\jre\bin\server;C:\j2sdk1.4.2_08\jre\bin;f:\sapdb\programs\bin;f:\sapdb\programs\pgm;F:\usr\sap\Python\.;D:\orant\bin;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem;C:\Program Files\Symantec\pcAnywhere\;C:\j2sdk1.4.2_08\bin;C:\Program Files\Microsoft SQL Server\80\Tools\BINN;F:\jdom-1.0\build\jdom.jar;D:\usr\sap\J2E\SCS01\exe;D:\usr\sap\J2E\JC02\exe;D:\usr\sap\J2E\SYS\exe\run
    -> exe path = PATH=C:\j2sdk1.4.2_08\bin;D:\usr\sap\J2E\JC02\j2ee\os_libs;f:\sapdb\programs\bin;f:\sapdb\programs\pgm;F:\usr\sap\Python\.;D:\orant\bin;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem;C:\Program Files\Symantec\pcAnywhere\;C:\j2sdk1.4.2_08\bin;C:\Program Files\Microsoft SQL Server\80\Tools\BINN;F:\jdom-1.0\build\jdom.jar;D:\usr\sap\J2E\SCS01\exe;D:\usr\sap\J2E\JC02\exe;D:\usr\sap\J2E\SYS\exe\run
    [Thr 5176] JControlICheckProcessList: process SDM started (PID:5484)
    [Thr 5820] Thu Sep 01 19:02:10 2005
    [Thr 5820] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 5820] Thu Sep 01 19:07:07 2005
    [Thr 5820] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 5820] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 5820] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 5820] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 5820] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 5820] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 5820] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 5820] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 5820] Thu Sep 01 19:12:14 2005
    [Thr 5820] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
    [Thr 5820] Thu Sep 01 19:17:15 2005
    [Thr 5820] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
    [Thr 5820] Thu Sep 01 19:22:16 2005
    [Thr 5820] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
    [Thr 5820] Thu Sep 01 19:27:37 2005
    [Thr 5820] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
    [Thr 5820] Thu Sep 01 19:32:57 2005
    [Thr 5820] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
    [Thr 5820] Thu Sep 01 19:37:58 2005
    [Thr 5820] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
    [Thr 5820] Thu Sep 01 19:43:18 2005
    [Thr 5820] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
    [Thr 5820] Thu Sep 01 19:48:19 2005
    [Thr 5820] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
    [Thr 5820] Thu Sep 01 19:53:39 2005
    [Thr 5820] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
    [Thr 5820] Thu Sep 01 19:58:40 2005
    [Thr 5820] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
    I change the java max heap size trying to solve to the problem but nothing it works.
    I am thankful beforehand if somebody can help me.
    Thanks a Lot.
    tino.com

    Hi,
    did u see the
    503   Service Unavailable
    http://help.sap.com/saphelp_nw04/helpdata/en/d8/b8fa40badbf46fe10000000a1550b0/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/a2/bb0a412a06f023e10000000a155106/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/81/df5641998e061de10000000a155106/content.htm
    Hope this helps,
    Thanks,
    Praveen

  • J2EE Server in Tx SMICM

    Hi experts.
    I recently install a Java Add-In on a BW 3.5 Server.
    After the installation I tried to apply a patch to the java stack but it gave me an error that i can't resolve.
    And now, after the unsuccessful attempt, I can't start my j2ee server. In the MMC exists the java instance and is it in green status, but when I go to Tx SMICM in the options Administrator -> J2EE Server -> ... all the options are in gray and I can't select anyone, I can't start the j2ee server.
    How can I solve this problem?
    All your help will be appreciated.

    The logs in the work directory dev_bootstrap, std_bootstrap, jvm_bootstrap*, dev_dispatcher, std_dispatcher.out
    dev_server0, std_server0.out, are no updated because the application doesn't start.
    The only log I can find is in the MMC in the process disp+work.exe in the developer trace:
    <font face='times'>
    DpSysAdmExtInit: ABAP is active
    DpJ2eeStart: j2ee state = INIT
    ERROR => DpProcCreate: DpJ2eeStart failed [dpxxdisp.c   10768]
    rdisp/http_min_wait_dia_wp : 1 - > 1
    DpJ2eeStart: j2ee state = INIT
    ERROR => DpEnvCheckJ2ee: DpJ2eeStart failed [dpxxdisp.c   6445]
    Tue Jun 03 18:21:06 2008
    ERROR => DpForkExec: CreateProcess (2: No such file or directory) [dpntdisp.c   1486]
    LOG Q0I=> DpForkExec, CreateProcess ( CreateProcess 2) [dpntdisp.c   1488]
    DpJ2eeStart: j2ee state = INIT
    ERROR => DpEnvCheckJ2ee: DpJ2eeStart failed [dpxxdisp.c   6445]
    Tue Jun 03 18:23:46 2008
    DpEnvCheckJ2ee: switch off j2ee start flag
    </font>
    That is the only information that I can get about j2ee server.

  • Where to find the information to setup the J2EE server to run optimal CPS

    Hello,
    I am looking for the information, how the J2EE server should be setup, to run optimal CPS.
    In the installation guide I am not finding it, our I am not looking on the right pages.
    We are using CPS for 4 dev. systems, 1 q und 5 prod. systems.
    On the dev. system we want to run the default sap jobs and the db13 jobs on CPS.
    On the prod. system we are talking around 300 jobs.
    I am looking for a hint, like use 4 jlaunch process with mem 4 gb, or something.
    Run the CPS in the evalution right now, it performs very slow.
    We are using two jlaunch process, using 2 GB each.
    The both processes are clusterd.
    Many thanks for your feedback.
    Best regards
    Carlos Behlau

    Hi Neil and Anton,
    many thanks for your feedback.
    Concerning the sizing guide:
    I am aware of the sizing guide.
    What I do not find, with what setting the J2EE Server should run.
    Lets say: We having a 64 Bit OS u2013 should the J2EE Server process run with 2 GB, the default, or would it speed up the application if we would give the process 4 GB.
    What about the caching settings, of the J2EE Server?
    Are there any best practice documents for VMware ESX environment?
    Best regards and many thanks for your replyu2019s.
    Carlos  Behlau

Maybe you are looking for

  • How to get webgallery items to look as good as photo album items?

    I like the look of photo albums, but I want my web gallery items to look as good. I tried placing a web gallery into a photo album drop zone...didn't work. Is there a way to get a web gallery item to look different than the default? I couldn't even d

  • Lookup for value while mapping

    Hi , I have a situation in hand and i am looking for a performance effective solution .May be anyone can help me. I have a PO where i have to map it to a xml . at the item level i have to fetch a field from the SAP Backend and then populate the XML w

  • Thunderbolt Mac Mini with 2 Thunderbolt Displays

    Hi, Is it possible to connect 2 Apple Thunderbolt Displays to the new Thunderbolt Mac Mini, through daisy chain? Thanks!

  • G4 floppy disk

    Hello , I have an old version of Cubase VST [4.1],and I would like to use it with my G4 ,just to have fun. Because this software has a protection system with a floppy disk ,I need to use a floppy disk drive with my G4, to authorise my hard disk for u

  • Changing "Reply to" email option in iPhone 3.0?

    I am wondering if anyone has heard about Apple adding a "reply to" email change option? I don't want to use Gmail or anything like that. I just want a native option to do so.