J2EE SLD Configuration (NW04s ABAP+J2EE)

Hi,
I have just installed NW04s BI System with ABAP + J2EE (SP13).
We have a SLD running on SolMan 4.0 (SP13) which is a different host.
I have configured the ABAP part of the SLD for NW04s BI System and it is working fine.
I have no idea how to configure the J2EE side of it.
The only thing I have defined is a Business and Technical system for J2EE in our SolMan SLD for our BI.
I do not know how to proceed for J2EE of our BI system. I have found few links but kind of confused.
Can anyone please give me exact steps I need to configure. I do not need detail but just a sequence of steps.
I will appreciate your help.
Regards.
SSingh

Thank you for the reply. It helped.
My goal is to creat the BI system as a Application System in SXMB_ADM. I have done the ABAP part including the destinations SAPSLDAPI, LCRSAPRFC and SLD configuration. They are working fine as I said in my message.
Now from the J2EE side, the only thing which is required is what you said.
Is that enough to make make the J2EE also a Application System or more needs to be done once J2EE is SLD ready. I know that J2EE should also be craeted as a Business and Technical in SLD. That part is done.
Please respond.
Regards.
SSingh

Similar Messages

SLD configuration for NW04s EP7

Hello,
Is there any step by step procedure to configure SLD for NW04s EP7.
Backend system is ECC6
*Points will be awarded based on answer

Mickey,
Still I am facing problem.Please send me configuration document to the following E-Mail ID
[email protected]
I will give you points once I received you E-mail
Thanks in advance

Prerequisites to configuration for ABAP Proxy -???

My scenario is file->XI->R/3(abap server proxy).
Xi and R/3 are 2 seperate business systems
-Abap server proxy created on R/3 business system. R/3 client 550
-Xi client 400.
-SLD is common for both XI and R/3
My question is in reference to the below message thread:
1.I understand all the below configuartaion has to be done on R/3 business system, tell me am I correct
2. are these configuartion needed for client proxy as well as server proxy also?
HTTP_RESP_STATUS_CODE_NOT_OK
The prerequisites to configuration for ABAP Proxy include: (landscape dependent)
1. The business systems should be based on SAP Web AS 6.20 and SAP Web AS 6.20 kernel patch level above 1253
2. You have installed the XI Add-On in each of these business systems as described in the Installation Guide SAP Exchange Infrastructure 3.0
3. The business systems and your central Integration Server are maintained in the System Landscape Directory (SLD).
Configuration required on the Business System:
1. Create HTTP connection in the business system.
Configuration Details:
Technical Setting:
1. Following Inputs are required for technical setting
1 Connection Type: H
2 Target Host: System name
3 Service Number: HTTP Port name
4 Path Prefix: /sap/XI/engine/?type=entry
Logon Security
On the Logon/Security tab page, enter the following logon data:
1 User: XIAPPLUSER (for example); this user should represent the sending business system (see also the SAP XI Security Guide under Service Users for Message Exchange).
2 Password: the password you have specified for this user
3 Client: SAP XI Integration server
4 Language: Language required
2. Configuration Business system as local Integration Engine.
1. Goto Transaction SXMB_ADM
2. Choose Edit --> Change Global Configuration Data.
3. Select Role of Business System: Application system
4. Corresponding Integration server: dest://<HTTPDESTINATION>. Here <HTTPDESTINATION> SAPISU_XID created in step 1. Dest://SAPISU_XID.
5. Under Specific Configuration Data you can specify additional configuration data
1.Select the relevant category under Specific Configuration Data.
2.Choose Change Specific Configuration Data.
For ABAP Proxies, Add the following configuration:
1.Category RUNTIME
2.Parameters: IS_URL
3.Current Value: dest://SAPISU_XID
Configuration of the Integration Engine
3. Connection between Business System and System Landscape Directory
1. Create RFC destination (TCP/IP) LCRSAPRFC and SAPSLDAPI for the SLD connection.
1.Execute transaction SM59 in the business system.
2.Choose Create.
3.Enter at least the following:
1.RFC Destination: LCRSAPRFC
2.Connection Type: T
3.Description: <your description>
4.Choose ENTER.
5.Choose the Technical settings tab page and do the following:
6.In the Program ID field under Registered Server Program, enter LCRSAPRFC
7.This program ID must correspond to a program ID specified in the RFC engine settings of the SAP J2EE Engine on the Integration Server host.
RFC Destination
2. Maintaining the SAP J2EE Connection Parameters for LCRSAPRFC and SAPSLDAPI in SAP J2EE engine
1. Goto J2EE Engine
2. Choose Cluster --> Server --> Services. JCo RFC provider
3. Under RFC destination specify the following:
Program ID: LCRSAPRFC
Gateway Host: <Integration Server host>
Gateway Service: <Integration Server gateway service>
Number of process: 3
4. Under Repository specify the following:
Application Server: <Integration Server host>
5. Choose Set.
3. Maintain SLD access details in Transaction SLDAPICUST
1. You can reuse this program ID for all Business systems
2. If there is HTTP error during connection, first run transaction SLDCHECK in the Business system. Also check that HTTP connection is working fine.
3. In XI Adapter use HTTP connection rather then giving R/3 input details as this is easier to transport and maintenance
4. One receiver adapter can be used for all Interfaces connecting to a Business system.
Thanks for your reply in adavnce.
KK

2. are these configuartion needed for client proxy as well as server proxy also?
>>>>
the configuration is one time thing and your R3 will act as a server or client according to the data being sent or received.
In R3 a point to be noted is that in SXMB_ADM -> Intg. Engine Confg. -> Role of Business System sud be as a Application System.
Ref: /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Message was edited by: Shabarish Vijayakumar

Can't store new target Array index out of range: 1 - SLD Configuration

Hello ,
Issue is regarding SLD configuration , We have ABAP + Java Addin on Suse Linux x86 ( 64 bit ) with Oracle 9.x .
Java instalaltion competed succesfully , J2EE is up and runnung while configuring SLD , Data Supplier Bridge - Configure the data supplier bridge - Update SLDs
As I set Update local SLD (sld/active) to true it gives error : Can't store new target Array index out of range: 1
( Error recorded in default.trace ,
#1.5#001635052D79005D000000010000393A00041904004A592B#1153404882278#com.sap.engine.library.monitor.mapping.ccms.Trace##com.sap.engine.library.monitor.mapping.ccms.Trace######87587b2017f911dbc661001635052d79#SAPEngine_System_Thread[impl:5]_82##0#0#Error##Plain###RegisterNode</Services/Web Services/Requests Number/sap.com/com.sap.engine.heartbeat/GRMGWSTest/CurrentClient>: com.sap.mona.api.JMonException: com.sap.mona.api.JMonAPIException: Internal error in tree structure#
#1.5#001635052D790049000000060000393A000419040226E9F1#1153404913510#com.sap.lcr.sagent.BuilderDirector#sap.com/com.sap.lcr#com.sap.lcr.sagent.BuilderDirector#J2EE_ADMIN#317####29009b1017fa11db96bd001635052d79#SAPEngine_Application_Thread[impl:3]_14##0#0#Error#1#/Applications/SLD#Plain###Can't access http store#
#1.5#001635052D790049000000070000393A000419040226EA90#1153404913511#com.sap.lcr.sagent.BuilderDirector#sap.com/com.sap.lcr#com.sap.lcr.sagent.BuilderDirector#J2EE_ADMIN#317####29009b1017fa11db96bd001635052d79#SAPEngine_Application_Thread[impl:3]_14##0#0#Error##Plain###Thrown:
com.sap.lcr.api.cimclient.LcrException: java.lang.ArrayIndexOutOfBoundsException: Array index out of range: 1
I have already through updated Component Repository SAP Note : 669669 .
Regards ,
Santosh

Hi,
I am having exactly the same issue. Would you please advise what the solution was?
Thanks,
Murad.

SLD Configuration error: Dispatcher running but no server connected!

Hi Gurus,
In t-code solman_setup under SLD configuration, the error dispatcher running but no server connected is prompted in the web browser.
Also, I've noticed that in SAP MMC the server0 in AS Java Process table has a return code error of -11113.

JHVM_LoadJavaVM: VM Arguments of node [server0]
-> stack : 1048576 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: vfprintf
-> arg[ 3]: -XX:MaxNewSize=341M
-> arg[ 4]: -XX:NewSize=341M
-> arg[ 5]: -XX:MaxPermSize=512M
-> arg[ 6]: -XX:PermSize=512M
-> arg[ 7]: -XX:SurvivorRatio=2
-> arg[ 8]: -XX:TargetSurvivorRatio=90
-> arg[ 9]: -XX:SoftRefLRUPolicyMSPerMB=1
-> arg[ 10]: -XX:+HandlePromotionFailure
-> arg[ 11]: -XX:+UseParNewGC
-> arg[ 12]: -XX:+DisableExplicitGC
-> arg[ 13]: -XX:+UseTLAB
-> arg[ 14]: -XX:+PrintGCTimeStamps
-> arg[ 15]: -XX:+PrintGCDetails
-> arg[ 16]: -verbose:gc
-> arg[ 17]: -Dsun.io.useCanonCaches=false
-> arg[ 18]: -Djava.awt.headless=true
-> arg[ 19]: -Djco.jarm=1
-> arg[ 20]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
-> arg[ 21]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
-> arg[ 22]: -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer
-> arg[ 23]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
-> arg[ 24]: -Djava.security.policy=./java.policy
-> arg[ 25]: -Dsys.global.dir=G:\usr\sap\SMP\SYS\global
-> arg[ 26]: -Dapplication.home=G:\usr\sap\SMP\DVEBMGS00\exe
-> arg[ 27]: -Djava.class.path=G:\usr\sap\SMP\DVEBMGS00\exe\jstartup.jar;G:\usr\sap\SMP\DVEBMGS00\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> arg[ 28]: -Djava.library.path=C:\j2sdk1.4.2_17-x64\jre\bin\server;C:\j2sdk1.4.2_17-x64\jre\bin;C:\j2sdk1.4.2_17-x64\bin;G:\usr\sap\SMP\DVEBMGS00\j2ee\os_libs;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;G:\usr\sap\SMP\SYS\exe\uc\NTAMD64
-> arg[ 29]: -Dmemory.manager=2048M
-> arg[ 30]: -Xmx2048M
-> arg[ 31]: -Xms2048M
-> arg[ 32]: -Xss2M
-> arg[ 33]: -DLoadBalanceRestricted=no
-> arg[ 34]: -Djstartup.mode=JCONTROL
-> arg[ 35]: -Djstartup.ownProcessId=2184
-> arg[ 36]: -Djstartup.ownHardwareId=E1203704103
-> arg[ 37]: -Djstartup.whoami=server
-> arg[ 38]: -Djstartup.debuggable=no
-> arg[ 39]: -Xss2m
-> arg[ 40]: -DSAPINFO=SMP_00_server
-> arg[ 41]: -DSAPSTART=1
-> arg[ 42]: -DCONNECT_PORT=64999
-> arg[ 43]: -DSAPSYSTEM=00
-> arg[ 44]: -DSAPSYSTEMNAME=SMP
-> arg[ 45]: -DSAPMYNAME=solmanprd_SMP_00
-> arg[ 46]: -DSAPPROFILE=G:\usr\sap\SMP\SYS\profile\SMP_DVEBMGS00_solmanprd
-> arg[ 47]: -DFRFC_FALLBACK=ON
-> arg[ 48]: -DFRFC_FALLBACK_HOST=localhost
-> arg[ 49]: -DSAPSTARTUP=1
-> arg[ 50]: -DSAPSYSTEM=00
-> arg[ 51]: -DSAPSYSTEMNAME=SMP
-> arg[ 52]: -DSAPMYNAME=solmanprd_SMP_00
-> arg[ 53]: -DSAPDBHOST=SOLMANPRD
-> arg[ 54]: -Dj2ee.dbhost=SOLMANPRD
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
[Thr 3032] JHVM_LoadJavaVM: Java VM created OK.
JHVM_BuildArgumentList: main method arguments of node [server0]
[Thr 3384] Tue Nov 30 16:51:03 2010
[Thr 3384] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
[Thr 3384] Tue Nov 30 16:51:04 2010
[Thr 3384] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
[Thr 3384] Tue Nov 30 16:51:05 2010
[Thr 3384] JLaunchISetClusterId: set cluster id 1030850
[Thr 3384] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
[Thr 3384] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
Tue Nov 30 16:51:12 2010
10.572: [GC 10.572: [DefNew: 174592K->11860K(261888K), 0.0496237 secs] 174592K->11860K(2009856K), 0.0496873 secs]
Tue Nov 30 16:51:16 2010
14.788: [GC 14.788: [DefNew: 186452K->15631K(261888K), 0.0420753 secs] 186452K->15631K(2009856K), 0.0421219 secs]
Tue Nov 30 16:51:20 2010
18.420: [GC 18.420: [DefNew: 190223K->19899K(261888K), 0.0434161 secs] 190223K->19899K(2009856K), 0.0434632 secs]
Tue Nov 30 16:51:27 2010
25.759: [GC 25.819: [DefNew: 194491K->28552K(261888K), 0.0664462 secs] 194491K->28552K(2009856K), 0.0665127 secs]
[Thr 2512] Tue Nov 30 16:51:28 2010
[Thr 2512] JLaunchIExitJava: exit hook is called (rc = -11113)
[Thr 2512] **********************************************************************
ERROR => The Java VM terminated with a non-zero exit code.
Please see SAP Note 943602 , section 'J2EE Engine exit codes'
for additional information and trouble shooting.
[Thr 2512] JLaunchCloseProgram: good bye (exitcode = -11113)

Central SLD Configuration

Dears,
Recently we installed PI DEV and PI QAS server.At time of configuration we choose local SLD option for configuration.
But now we are getting requirement to configure central SLD.
So please confirm which strategy is good between them and if it is central SLD,Please suggest the
procedure to change local SLD configuration to central SLD.
Shivam

Hi Shivam
The SLD planning guide provided previously is the key source to plan, implement and run an SLD landscape
However what it may not deal with specifically is changing an existing SLD landscape to accomodate a local PI specific
SLD and a new Central SLD for Solution Manager (or other purposes)
Some things to consider when selecting Sync options
1) 1 Dual purpose SLD is not recommended - a central SLD might have different administration requirements than a PI specific SLD
2) Where possible do not change established import or export lines in either SLD
3) Keep all SLDs involved in the sync at the same J2EE version, SP landscape and CIM model/content
As the PI SLD can be productive critical - full consideration has to be given to this SLD as you can
still maintain systems manually in a central SLD manually - or indeed in Solution Manager itself (both manually and automatically via RFC) - therefore I would recommend a unidirectional sync from local PI SLD to Central SLD of PI landscape data only - either manually or automatically or indeed explore any available options to have data suppliers update both SLDs (there was some options similiar to this in older SLD versions - but I am not completely familiar with the latest SLD builds)
I would not however encourage full sync or CIM based sync as there maybe established CIM import lines on either SLD nor would I specifically encourage the Central SLD to influence data on the Local existing PI SLD
Best wishes
Stuart

Sld configuration for rfc to soap scenario

Hi all,
The scenario which i am planning to do, describes how the Custom RFC client application in SAP R/3 System invokes a free Web service (that is hosted over the internet) using SAP XI. For our demo purpose, we have used a free web service available on the Internet.
In this scenario we will be using GetQuote method of Web service DelayedStockQuote. This method retrieves the Stock quote for the given Stock symbol. The method GetQuote has an input that takes in two parameters Stock Symbol and License Key and returns the following information.
StockSymbol,
LastTradeAmount,
LastTradeDateTime,
StockChange,
OpenAmount,
DayHigh,
DayLow,
StockVolume,
PrevCls,
ChangePercent,
FiftyTwoWeekRange,
EarnPerShare,
PE,
CompanyName.
Link to web service:
http://ws.cdyne.com/delayedstockquote/delayedstockquote.asmx?op=GetQuote
In this scenario, I planned to create two mappings, first between RFC Request to SOAP Request and second between SOAP Response to RFC Response .
Adapter in sender communication channel is RFC.(RFC Protocol)
Adapter in receiver communication channel is SOAP.(HTTP Protocol)
Result:
On testing this scenario, In the Sender R/3 system we have to Execute the Report program we have created earlier. When the program is executed with Stock symbol it should get the details of that stock symbol from the Web service.
My question here is what would be the sld configuration for webservice.whether it is a Java WAS or third party.If it is a third party or java WAS,what would be the system name and host name.
Any clarification from you all is welcome and will be highly appreciated.
With Regards
Karthik.

Hi,
I would suggest you is to use third party. It is a web service, and does not matter the technology behind it (if it is java, abap, .net, cobol, no difference! it will be described by a wsld).
System name and host name doesn't matter too, you will not use this information in runtime, and you will specify host name and so at integration directory. You can make your standard on it, for example, put the name as DelayedStockQuote and host as http://ws.cdyne.com.
regards.
roberti

Urgent pls ---- How to install SAP XI and check SLD configuration

Hello,
Pls send me links/pdfs/how to guide links --- to install SAP XI and check SLD configuration.
Regards

Hi,
A copy:
Links:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/73527b2c-0501-0010-5398-c4ac372c9692
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6bd6f69a-0701-0010-a88b-adbb6ee89b34
Follow these steps while installing XI:
1. Windows server or advanced server with latest service patch.
2. IE 6.0 with latest service patch
3. Install Microsoft office and winzip, acrobat
4. Install JDK with version 1.4.2_03 or above with the corresponding JVM
5. Install the SAP GUI 6.20
6. Make sure that you have hard disk space of 10 GB in C drive and 50 GB in the installation drive.
7. Make sure the virtual memory is between 512 and 1594 or above for the installation drive.
8. Copy the dumps of following DVDs into the installation drive.
Installation Master DVD
Installation Export
Additonal Components for SAP BW/SAP XI,SAP MI,SAP KW
SAP Web As Java
9. Start the installation from the DVD dump Installation Master DVD.
10. When installing the ABAP Database the SID of the oracle default database should be different the ABAP database SID.
U can go through the Installtion Guides for Installing XI from http://service.sap.com/instguides (SR1 installation)
u can also refer to service.sap.com/platforms to see the available platform on which XI can be installed. ( Windows/linux/UNIX)
or you can even go through this weblog which clearly talks to you about XI installation
XI installation: https://websmp202.sap-ag.de/~sapidb/011000358700009389172004E.PDF
In addition to this installation guide you also need to download the XI configuration guide which is very useful for technical configurations of various adapters and XI system.
At the same place you will also get the XI configuration guide e.g XI30ConfigGuideSPS11.pdf.
U can also download SAP Exchange Infrastructure 3.0 SR1 Installtion Guide from the articles scetion.
ABOUT XI :
If its just that you wanted to know more about sap xi....then the information below should definitely help you.
The best way to learn XI would be to make the maximum use of XI from its forums, weblogs, presentations, etc in SDN.
First I thought I will just give u the basic steps involved in doing any scenario in XI. This is very essential for a beginner.
First of all you would need to define your product, software component, business system and configure the technical landscape in the sld.
You then go on to create the objects in the repository, you import your software component here and then begin your design steps. To import your RFCs n Idocs if you require any before proceeding.
Then under the name space which you want, you go on to define your data types, message types and message interfaces.
Then you do your message mappings where you specify your source and target message types and the relation between them, then you do your interface mapping. If you are using a BPM, you do the integration process.
Once you have this done, you will have to move to the directory, here is where you define how you use the objects and how you configure them to work as a scenario.
You assign your business system to the configuration scenario which you have created, and create the communication channels. Then you go on to configure the receiver determination, interface determination, and the sender and receiver agreements. Once youre done you will have make sure you activate your objects. The exact parameters steps depend on what kind of scenario you are implementing.
You can use sxmb moni or the runtime workbench to monitor the entire scenario which you have done.
Also I would suggest this link on SAP help for any info that you want on XI,
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm

Cheers,
*RAJ*

SLD Configuration - Technical System and Business System

Hello,
I have installed SAP Solution Manager with local SLD and i want to use this system as Central SLD for my System Landscape. Later on i have installed other SAP Products like ECC,BI,PI etc.
Some of the systems i registered with previously defined SLD in Solution Manager, but some system i forgot to register with SLD during installation.
I am not sure or aware what is the difference between SLD configuration during installation and after installation.
If i have Register the System during installation will it register automatically with SLD or we have to do manually.
If i have not register system during installation and later on i want to register particular system with SLD what is procedure for that.
Can some one share knowledge on What is Technical Systems and Business System in SLD Configuration, i tried to do some activity for SLD Configuration but after seeing above both terms i was confused so for time being i stopped this activity.
Looking forward for kind response.
Best Regards,
V.Singh

Hello
try to go through these
http://help.sap.com/saphelp_nwesrce/helpdata/en/45/4208934d7f1193e10000000a1553f7/content.htm
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/652b1f46-0a01-0010-25ae-e7cb07b55414

Problem in SLD configuration

Hi,
While configuring SLD, when we tried to trigger in Visual Administrator we got following error.
SLD Data trigger error
Operation failed! Failed to collect SLD data. Failed to send HTTP data:500:Internal Server error. Please check if the target SLD system is available and SLD bridge is started there.
Data bridge is working.
Can any body help in this case?
Also,
Following are the list of System Properties
Please let me know which properties should be entered with respect to SLD.
Admin Password (DQE)
Admin User ID (DQE)
Application Host
CATALOG ADMIN Logoff Path
Catalog Administration Description
Catalog Administration Host Name
Catalog Administration Path
Catalog Administration Protocol
Catalog Administration Relative Path
Changed By
CodeLink
Collection
Created At
Created By
CVIEWS Description
CVIEWS Host Name
CVIEWS Logoff Path
CVIEWS Path
CVIEWS Protocol
CVIEWS Relative Path
Description
Domain
DRS Description
DRS Host Name
DRS Protocol
Enable Session ID Sharing
Enable URL Rewriting
FSCM Description
FSCM Host Name
FSCM Logoff Path
FSCM Path
FSCM Protocol
FSCM Relative Path
Gateway Host
Gateway Service
Host Name of Crystal Enterprise Server
ICSS Description
ICSS Host Name
ICSS Logoff Path
ICSS Path
ICSS Protocol
ICSS Relative Path
ISA B2B Description
ISA B2B Host Name
ISA B2B Logoff Path
ISA B2B Path
ISA B2B Protocol
ISA B2B Relative Path
ISA B2R Description
ISA B2R Host Name
ISA B2R Path
ISA B2R Protocol
ISA B2R Relative Path
ISA ENT Description
ISA ENT Host Name
ISA ENT Logoff Path
ISA ENT Path
ISA ENT Protocol
ISA ENT Relative Path
ISA ETR Description
ISA ETR Host Name
ISA ETR Logoff Path
ISA ETR Protocol
ISA ETR Relative Path
ISA ETR Relative Path
ISA HOM Description
ISA HOM Host Name
ISA HOM Logoff Path
ISA HOM Path
ISA HOM Protocol
ISA HOM Relative Path
ISA_B2R Logoff Path
ITS Description
ITS Host Name
ITS Path
ITS Protocol
Last Date Changed
Logical System Name
Logon Method
Master Language
Object is a Template
Object Type
Path of Crystal Enterprise Server
PCD Location
Protocol of Crystal Enterprise Server
Remote Host Type
SAP Client
SAP System ID (SID)
SAP System Number
Server Port
Session Cookie Name
Session URL Name
Shared Catalog Description
Shared Catalog Host Name
SHARED CATALOG Logoff Path
Shared Catalog Path
Shared Catalog Protocol
Shared Catalog Relative Path
SHOP ADMIN Logoff Path
Shop Administration Description
Shop Administration Host Name
Shop Administration Path
Shop Administration Protocol
Shop Administration Relative Path
SNC Library Path
SNC Mode
SNC Name
SNC Partner Name
SNC QOP (Security Level)
System Category
System Name
System Type
Trace Mode
USER ADMIN Logoff Path
User Administration Description
User Administration Host Name
User Administration Path
User Administration Protocol
User Administration Relative Path
User Mapping Fields
User Mapping Type
Validate Connection
Web AS Description
Web AS Host Name
Web AS Path
Web AS Protocol
WFM CS Description
WFM CS Host Name
WFM CS Path
WFM CS Protocol
WFM Description
WFM Host Name
WFM Path
WFM Protocol
Regards,
Vaibhav

hi,
check out this blog on SLD configuration, and check the proper steps you take
/people/sugree.phatanapherom/blog/2005/08/14/configuring-sld-in-sneak-preview-sap-netweaver-04-sneak
plus check out this thread
/thread/172900 [original link is broken]
hope it helps
regards

File-RFC-File SLD configuration

Hello everybody!
Currently I'm trying to create a File-RFC-File scenario. So that request from file is send to RFC and after that the RFC response is written to file. I'm following some guides on this topic here on sdn. So I'm almost done with ESB and IB designs but got stuck with SLD configuration. It's pretty confusing to me what software components, business and technical systems should i create for the purpose of my scenario. Could you please explain it step-by-step?
Thanks in advance,
Peter

>>>>>>>>confusing to me what software components, business and technical systems should i create for the purpose of my scenario
You dont need any software component or product is required, since already you are done with those objects.
May be you have used existed sofware component version for creating ESR objects. Okay.
1. You need one business system for R/3 or ECC
2. Juss get into SLD and create Technical System and Business System (If not yet available for R/3 or ECC)
3. As you have completed ur ESR, you can get into Configuration part
4. Choose - Communication component with out party
5. right click and assign business system (if R/3 or ECC is not yet assigned)
6. For File - you can go business service
That's it.
Regards
Pothana

SLD configuration for DXI / PXI technical systems

Hello,
we have a problem when transporting XI configuration objects from XI dev to XI prod. The transport objects arrive in XI prod, but the name of the business system (for the SAP backend system) is not converted from dev business system (T01CLNT010) to prod business system (P01CLNT01) although the transport target for T01CLNT010 business system was set correctly (we are using business system groups Dev and Prod). And the "related integration server" for T01CLNT010 was also set correctly to DXICLNT010.
But then I noticed that the technical system for the DXI (XI Dev) is configured as follows:
TMS Domain ("DOMAIN_PXI") and TMS Transport Group Name GROUP_PXI ("GROUP_PXI") have the same values as PXI. Is that correct ?? We are using file transport, not CMS.
Another strange effect is that when I set the group in business system DXICLNT010 to Dev, that is also applied to business system PXICLNT010 ! Which is of course not what I want.
I assume I have to associate DXICLNT010 to Dev and PXICLNT010 to Prod, same as for T01CLNT010 / P01CLNT010. Correct ? Or does the group in the XI business systems not matter ?
Can anyone post an example of a working SLD configuration with two XI system dev and prod ? What values do I have to use in the XI technical and business systems, so that the transport will work ?
CSY

There's obviously something wrong in the SLD configuration for the exchange infrastructure systems. The error you're describing (one system pointing to another) usually occurs when one system is generated through homogeneous system copy of another system (was that your case?). I've seen that behaviour once and they corrected it by manually deleting the exchange infrastructure systems from SLD and creating them again from scratch.
Anyway, I highly recommend you to get an expert NW Basis consultant to realize a check in it before you proceed any further.
Aside of that, you're correct in your assumptions.
Your config in SLD should be like:
DEV_GROUP:
- DXI
- T01
PRD_GROUP:
- PXI
- P01
It's always 1 XI BS per group.
Also, if you use separate SLDs for XI Dev and XI Prd, you have to make sure that this configuration is reflected in both SLDs. So, if you make it one SLD instance, you must generate a delta export zip file from the SLD where you did the configuration and import this zip file in the other SLD instance.
If you use a central SLD, then it's not necessary.
Regards,
Henrique.

Reg:SLD configuration

Hi.
we are trying to do SLD configuration.In that we need to change the value of gw/max_conn_per_wp parameter to a higher value.
Default value of this profile parameter is 10 in our server.
When we tried to change this value to 200,it shows that" **This change is not permanent and will be lost when the server is restarted"**
How can this value be modified to 200 permanently?

hi,
I think the parameter has to be set at OS level.
Refer the SAP Note 972262
Regards
Ramesh P

SLD Configurations in R/3

Hello SAP Gurus!
Can anyone tell me how to do SLD configuration in R/3. I cannot find any proper document for that.
thank you
Regards
Vanitha

Please find the steps you need to do in the R/3 system.
Checked the RFC SLD_NUC and SLD_UC both are pointing to SLD system.
Change in Transaction SLDAPICUST
Transaction RZ70 give the setting of SLD system and then execute the DATA collection job.
then goto visual admin and in sld data supplier under the server node change the Point the HTTP to SLD System.Also change the CIM client the next tab and give details of the SLD.
After that you cango in the SLD url and check you have the entry of the SID.
Thanks
Rishi Abrol

Portal SLD configuration

Hi experts,
I must do SLD configuration of portal to define technical system for ECC system.
On configuration i must select porduct and software component for ECC system.
Is there a blog how to configure portal SLD?
Thanks.

hi cml_bzl,
it one of the important task and carefull job in portal side-- SLD is one of the keuy component in portal
what ever u want to access from ecc side and what ever u want to show in portal SLD is main
u can find lots are blogs and articles regrading the sld and how to configure the sld for ecc
u can refer this blog for more details
SLD: General recommendation how to set up the system landscape directory
and u can find alots blogs if u check in sdn by name of Boris Zarske
let me know u need any further information
ravindra

J2EE SLD Configuration (NW04s ABAP+J2EE)

Similar Messages

Maybe you are looking for