SLD configuration for DXI / PXI technical systems

Hello,
we have a problem when transporting XI configuration objects from XI dev to XI prod. The transport objects arrive in XI prod, but the name of the business system (for the SAP backend system) is not converted from dev business system (T01CLNT010) to prod business system (P01CLNT01) although the transport target for T01CLNT010 business system was set correctly (we are using business system groups Dev and Prod). And the "related integration server" for T01CLNT010 was also set correctly to DXICLNT010.
But then I noticed that the technical system for the DXI (XI Dev) is configured as follows:
TMS Domain ("DOMAIN_PXI") and TMS Transport Group Name GROUP_PXI ("GROUP_PXI") have the same values as PXI. Is that correct ?? We are using file transport, not CMS.
Another strange effect is that when I set the group in business system DXICLNT010 to Dev, that is also applied to business system PXICLNT010 ! Which is of course not what I want.
I assume I have to associate DXICLNT010 to Dev and PXICLNT010 to Prod, same as for T01CLNT010 / P01CLNT010. Correct ? Or does the group in the XI business systems not matter ?
Can anyone post an example of a working SLD configuration with two XI system dev and prod ? What values do I have to use in the XI technical and business systems, so that the transport will work ?
CSY

There's obviously something wrong in the SLD configuration for the exchange infrastructure systems. The error you're describing (one system pointing to another) usually occurs when one system is generated through homogeneous system copy of another system (was that your case?). I've seen that behaviour once and they corrected it by manually deleting the exchange infrastructure systems from SLD and creating them again from scratch.
Anyway, I highly recommend you to get an expert NW Basis consultant to realize a check in it before you proceed any further.
Aside of that, you're correct in your assumptions.
Your config in SLD should be like:
DEV_GROUP:
- DXI
- T01
PRD_GROUP:
- PXI
- P01
It's always 1 XI BS per group.
Also, if you use separate SLDs for XI Dev and XI Prd, you have to make sure that this configuration is reflected in both SLDs. So, if you make it one SLD instance, you must generate a delta export zip file from the SLD where you did the configuration and import this zip file in the other SLD instance.
If you use a central SLD, then it's not necessary.
Regards,
Henrique.

Similar Messages

Sld configuration for rfc to soap scenario

Hi all,
The scenario which i am planning to do, describes how the Custom RFC client application in SAP R/3 System invokes a free Web service (that is hosted over the internet) using SAP XI. For our demo purpose, we have used a free web service available on the Internet.
In this scenario we will be using GetQuote method of Web service DelayedStockQuote. This method retrieves the Stock quote for the given Stock symbol. The method GetQuote has an input that takes in two parameters Stock Symbol and License Key and returns the following information.
StockSymbol,
LastTradeAmount,
LastTradeDateTime,
StockChange,
OpenAmount,
DayHigh,
DayLow,
StockVolume,
PrevCls,
ChangePercent,
FiftyTwoWeekRange,
EarnPerShare,
PE,
CompanyName.
Link to web service:
http://ws.cdyne.com/delayedstockquote/delayedstockquote.asmx?op=GetQuote
In this scenario, I planned to create two mappings, first between RFC Request to SOAP Request and second between SOAP Response to RFC Response .
Adapter in sender communication channel is RFC.(RFC Protocol)
Adapter in receiver communication channel is SOAP.(HTTP Protocol)
Result:
On testing this scenario, In the Sender R/3 system we have to Execute the Report program we have created earlier. When the program is executed with Stock symbol it should get the details of that stock symbol from the Web service.
My question here is what would be the sld configuration for webservice.whether it is a Java WAS or third party.If it is a third party or java WAS,what would be the system name and host name.
Any clarification from you all is welcome and will be highly appreciated.
With Regards
Karthik.

Hi,
I would suggest you is to use third party. It is a web service, and does not matter the technology behind it (if it is java, abap, .net, cobol, no difference! it will be described by a wsld).
System name and host name doesn't matter too, you will not use this information in runtime, and you will specify host name and so at integration directory. You can make your standard on it, for example, put the name as DelayedStockQuote and host as http://ws.cdyne.com.
regards.
roberti

SLD configuration in already existing Solman system

Hello,
We already have dedicated central SLD in our landscape but now we want to configure SLD in already existing SOLMAN and decommission the existing one.
Can anyone suggest how to configure SLD in already installed SOLMAN (may be high level step by step process)?
Thanks & Regards,
NK

Hi Nitin,
What will be the purpose of SLD of solution manager ?
eg. 1631346 - Solution Manager 7.1: SLD configuration for PI monitoring
You can add this SLD with a higher rank than the older SLD but lower than LMDB in solman_setup.
Refer:Step By Step Process to configure SLD, MOPZ & EWA in Solution Manager 7.1 SP 8
https://help.sap.com/saphelp_sm71_sp05/helpdata/en/a5/971735dd184f5c8d943c6cf423d13a/content.htm
Divyanshu

SCOT configuration for internal & external email system in EP.

Hi,
I want to add SCOT configuration for internal & external email system in SAP EP 7.0 ?
What all steps I need to do ? any good documents on this ?

Hi Haider,
I have read the link you have given me to configure SCOT. I have 3 doubt plzz clarify.
Doubt No. 1:
In that link its mentioned that I have to add 2 profile parameter in the transaction RZ10 namely icm/server_port_<>* and is/SMTP/virt_host_<>*
My question is Can I put any value which i like in place of * like can I add either icm/server_port_2 OR icm/server_port_3 OR icm/server_port_4 in icm parameter AND ALSO
Can I put any value which i like in place of * in is/SMTP/virt parameter like can I add either is/SMTP/virt_host_0 OR is/SMTP/virt_host_1 OR is/SMTP/virt_host_2 .
Doubt No. 2:
What port value I have to put in the profile parameter    icm/server_port_2 in RZ10. Can I put any port value ? and automatically that port will work? say suppose I addded this profile parameter in RZ10
icm/server_port_2 = PROT=SMTP,PORT=25000,TIMEOUT=180          so automatically 25000 port will work ? or will it give error?
Doubt No. 3:
When I go to SMICM transaction and go to services , I get the following:
No. Log         Service name/port     Host name           Keep Alive    Proc TimeOut   Active
1     HTTP               8000                  epv.sopm.com           30                     60               Yes
2     SMTP               0                       epv.sopm.com            30                    60                Yes
3     HTTPS             8001                 epv.sopm.com            30                    180               Yes
This means that HTTP port is 8000,   HTTPS port is 8001. My question is why in SMTP its showing 0, why no port is shown?
I have not added any profile parameter like icm/server_port_2 = PROT=SMTP,PORT=25000,TIMEOUT=180     for SMTP in RZ10 as of now.
Is this the reason for this ?

SLD configuration for R/3 system

hi all
i want to configure SYSTEM LANDSCAPE DIRECTORY for my R/3 system.
kindly suggest steps for same.
gud suggestions will b rewarded.
thanx

Hi Chetana,
Refer to the following links:
http://help.sap.com/saphelp_nw70/helpdata/EN/43/01ea90ab24235de10000000a1553f7/content.htm
create System in EnterprisePortal
Thanks n Regards,
Jhansi Miryala

SLD Configuration for WEB As JAVA

SDN TEAM,
PLease can you send the screen shots for configuring SLD for WEB AS Java
For valuable answer definity i will reward points
Regards'
CHANDU

Hi,
Fisrt you have to define a technical system in SLD
using the URL
http://<host>:<port>/sld u2192 Link Technical Landscape
there you have select under landscapes---->technical systems
select new technical system.
select the server either (web As ABAP.Web AS java)what ever is ur server select it.
next u have another screen
asking SID,Installation no.,Database host name.
For all the details webas abap.
you can view after looging in the option in the menu bar system->status.
next
Enter the message server host, application server host, the instance number, the
message server port and all logon groups.
On the next screen you can add the name of all application server hosts (and their
instance numbers) belonging to the same SAP system. Press Next.
Now enter all clients, you want to use with the JCo connections. At least one
client has to be defined
Thnaks & Regards,
Lokesh.
If you have any doubts.
please let me know

SLD change for Portal 7.0 system

Hi Experts,
Need to change existing SLD for the time being in Portal system 7.0 which has totally 5 server nodes
In the visual admin, should I have to mention the new SLD entries in SLD data supplier for one server node ( cluster > server node 1 > services) (or ) in the rest of four server nodes togeather?
Is changing the SLD entry in one server node enough?
I tried to chnage in the global configuration , but dont see any entries for mentioning the SLD details.
I will appreciate your help and suggestion
Thanks in advance

Hi ,
Changed the SLD in server node 0 and it got reflected in other server nodes automatically.
In content admin, even the SLD connection test is working fine.
Now there is a problem in Jc0 connections.
Only the SSO -Jco connection test is getting successful but the Jco metadata connection fails with the error"
why the username/password Jco only fails.
the backend system is exist in the new sld as technical system with all logon groups
I will appreciate your help
Thanks in advance

SLD - Error in creation of technical system

hi experts,
when we go to create a new technical system type WEB AS ABAP, the system said 'system already exists'
it exist other technical system for this system of type third party,
don't is it possible have together?
very thanks,

Hi,
The problem is due to whatever technical system your are trying to create those details are already contain another technical system name in SLD. We can't create more then one technical system with same parameters. Better to use existing technical system or delete existing one create new one.

Database tab is not filled in SLD after I create a technical system abap

Hi guys,
why is it? what do I have to set up to have this tab filled with valid values?
Thank you
Olian

Hi,
For technical system of type WebAS ABAP, you do not create it manually in SLD......instead its process is to log into R/3 system and run transaction RZ70 and from this transaction technical details of R/3 system are published to SLD of XI..........this is a basis activity and so you can ask your basis guys to do it for you...........then when it is done, then your Web AS system will be created in technical system in SLD with all the data filled properly.
Regards,
Rajeev Gupta

SLD configuration to transport Third Party System ID Objects

Hi expert,
I have configured SLD group according to below link .
Transport Targets and Groups in the SLD
for PI and ECC system i have assigned transport target.
we have third party system also defined in SLD there name is same in PI dev ,PI quality and PI production.
how to proceed to set transport target for third party system if name is same ?
Thanks,
Dipak Patil

Hi Dipak
If your third party system has the same name in all other environments, you do not need to set transport target. Then there won't be automatic translation of the Business System name during import to the other environments.
Rgds
Eng Swee

Can UWL are simontanously configure for two different sap systems ? How ?

Hi,
I am new in portal. Can any one tell me how to configure UWL . We have r/3 system as well as crm system. i want to show both UWL for both the system on one page.
Please give ans in steps by steps.
Please suggest me steps for that.
Regards,
Gurprit Bhatia
Edited by: GURPRIT BHATIA on Dec 26, 2007 1:34 PM

Hi GURPRIT,
It is possible to display item from two different systems.
All you need to do is create separate webflow connectors for the systems for which you required to configure the UWL and the systems must be available in the SLD.
after creating the connectors register both of them and you can start receiving workitems from both the systems.
reward if useful.
Rgds,
Vijay

Managed System configuration for SAP NW Java system in Solution Manager 7.1 SP10

Hi All,
I am doing Managed system configuration for my SAP NW 7.01 Java system and getting below error in step 6 create users SAPSUPPORT & SM_COLL_SID.
"An unexpected error occured. An error occured while processing the UME command READ_USER from agent <hostname> : Server returned: 302 Found "
I have checked my DAA as well as host agents are up and running fine. My Solution Manager is 7.1SP10.
Please suggest.
Regards,
Manish

Manish,
Which UME you are using? portal/ABAP/LDAP
Are you using the SOLMAN_ADMIN user while configuring.
Also check the below forum.
https://scn.sap.com/thread/1167282
Regards,
Raja. G

SLD configuration for NW04s EP7

Hello,
Is there any step by step procedure to configure SLD for NW04s EP7.
Backend system is ECC6
*Points will be awarded based on answer

Mickey,
Still I am facing problem.Please send me configuration document to the following E-Mail ID
[email protected]
I will give you points once I received you E-mail
Thanks in advance

Versions configuration for controlling from project system

Hi Guys,
I need to know the flow for add additional versions to the real version for CO-PS.
There is any how to or guide about it is?
Thank you very much.
Regards,
Jeysi

Hi Ahmed
Same material codes is used both for common use and also in PS as project items.
These material codes are defined as VB (reorder point material planning).
Now after MRP run, total requirements is coming considering existing unrestricted stock, project stock, project requirement from WBS.
I do not want project stock and requirement should participate in MRP.
Please help.
Regards
Pradipta Sahoo

Buisness system can not find the relevant technical system in xi sld

Hello,
I set up r3 business system and technical system landscape in xi SLD, somehow the business system cannot find the relevant system landscape, does anybody have any suggestions what's possiblly goes wrong in my sld setting or how should I debug?
Thanks,
Meg

Hey,
Well did you create the technical system or was it created or used before>? Unless it was done you can't create Business System for the specified technical system.
Cheers,
<b>*RAJ*
*REWARD POINTS IF FOUND HLEPFULL*</b>

SLD configuration for DXI / PXI technical systems

Similar Messages

Maybe you are looking for