J2ME and java 1.3

Currently I have java 1.2 installed on my PC. I want to install the JavaTM 2 Platform Micro Edition, Wireless Toolkit 1.0.3. The software requirement for this is that you need java 1.3.0 or higher, I was thinking do I install java 1.3 over 1.2 and change the classpath to point to 1.3. If I have to uninstall java 1.2 then I do not know how to do this.
Can someone please help.
Thanks,
Latafat.

[latafat],
Yes, you are correct to say that the J2ME Wireless Toolkit 1.0.3 does require the J2SE SDK 1.3 or later.
You need not remove the J2SE SDK 1.2 that you have currently installed onto the PC, just install the SDK 1.3.x onto the PC and multiple versions of the SDK can co-exist in the PC. When you install the toolkit, it will prompt you that you have the SDK 1.3 installed onto the PC, just select this option.
In summary - multiple versions of the Java SDK can co-exist on the same machine.
HTH.
Allen Lai
Developer Technical Support
SUN Microsystems
http://www.sun.com/developers/support/

Similar Messages

  • J2me and java card, need help to communicate

    we are trying to put together a reader to read smartcards using j2me and we figure that it would be easiest if we could develop it to work with java cards rather than standard smart cards, the problem is we get garbage when we communicate to it, the chip sends us crap, any suggestions what might be wrong, any calls we might be missing, has anyone worked with j2me and java cards or smart cards, any help would be appreciated.
    einar

    .... reader app and the ME behind it .... smells like mobile ....
    First of all - if you want to have one mobile application running on this just make sure that whatever is written in ME can use drivers from the reader chip ....
    Workin on the PC is something completely different. There was one good example how to develop one host application in Java provided with the JCOP tools long ago ... I don't know if this is now in the new Eclipse tools.
    But - there was a small API provided that can give you good hints what to do - and - once you have it on the reader side - you can easily integrate ME methods with this ...

  • Information Retrieval with Genetic Programming using J2ME and Java WTK

    i have a big project to make a software using java programming especially n using J2ME and Java Wireless Toolkit, and i'm a begginer for java programming. I have no idea for the interface and how to setting connection between my phone mobile and GPRS. what should i do? thank you

    I believe MIT has lots of sourcecode. Try searching their site.

  • J2ME and java.nio

    I'm not sure which forum this should go in so applogies if I got it wrong.
    I would like to use the java.nio package from JDK1.4 with the J2ME. Is this possible in any way?
    cheers
    Andrew

    I'm not sure which forum this should go in so
    applogies if I got it wrong.
    I would like to use the java.nio package from JDK1.4
    with the J2ME. Is this possible in any way?this topic should be post at
    CLDC and MIDP
    http://forum.java.sun.com/forum.jsp?forum=76
    or
    K Virtual Machine (KVM)
    http://forum.java.sun.com/forum.jsp?forum=50
    CLDC 1.0 and MIDP 1.0 doesn't include java.nio
    please go to
    http://java.sun.com/j2me/docs/
    two documents will be useful
    CLDC Specification, V1.0
    MIDP 1.0 Specification, Final (JSR 37)

  • Re: how can record video+audio on j2me and java also?

    You can capture video similar to the way you capture audio or images.
    Player p = Manager.createPlayer("capture://video");After you have the player you can get the RecordControl and VideoControl
    recordControl = (RecordControl) p.getControl("RecordControl");
    videoControl = (VideoControl) (p.getControl("VideoControl"));You can get the content type from the record control. Use rc.startRecord(); to begin the record process.
    There are some steps you will need to fill in, such as prefetching, setting the display location, etc. The snippets above should be enough for you to start your research though.

    You can capture video similar to the way you capture audio or images.
    Player p = Manager.createPlayer("capture://video");After you have the player you can get the RecordControl and VideoControl
    recordControl = (RecordControl) p.getControl("RecordControl");
    videoControl = (VideoControl) (p.getControl("VideoControl"));You can get the content type from the record control. Use rc.startRecord(); to begin the record process.
    There are some steps you will need to fill in, such as prefetching, setting the display location, etc. The snippets above should be enough for you to start your research though.

  • J2ME and MIDP beginner questions

    Can anyone recommend editor/IDE, toolkit etc. for coding, building and testing MIDP2.0 apps/games?
    Until now I've coded a game using J2SE. I used Forte 3.0 for coding and compiling, and IE5.5 for testing.
    Now I want to code mobile games/apps using J2ME and MIDP 2.0. What software do I need? I downloaded Sun ONE studio 4 ME and wireless toolkit 2.0, but are kind of struggeling with it :)
    Regards
    Hallvard

    Ok, I found out that the toolkit compiled the .java files and could bulid the .jar and .jad files, and then test the MIDLet on the emulator.
    But what about a good editor/IDE for MIDLets? In Sun ONE studio ME i finally managed to create a HelloWorld Midlet (with new project wizard), and build and run it in the toolkit.
    I also heard that Borland JBuilder Mobile Edition was a nice IDE for J2ME/MIDLets.
    Hallvard

  • J2ME and 802.11

    Hi everybody,
    I'm also suffering from the same disease of not knowing the answer to the
    following questions :-
    1. In a 802.11a/b/g enabled mobile phone if I use StreamSocket then How
    can I make sure that my data is transferred over wi-fi or through other data
    bearer service like GPRS, HSCSD etc.
    2. Does these wi-fi enabled mobile phones mount 802.11a/b/g modem as a
    serial communication device so that we can communicate it using CommConnection?
    3. How can I build applications that will work in local lan with J2ME on a 802.11a/b/g
    enabled mobile phone?
    Akshay Dev Vankhede
    <[email protected]>
    Mob: +91 9867698636

    I have a similar problem,
    how to write a MIDlet that communicates via 802.11x without using IP protocol (actually I want to implement an handshake to gain IP access).
    Do I have to look to a particular Optional Package (a JSRxxx) implemented in the JVM? Or is it supposed that a device capable of Wi-Fi connection (and Java Support to it), would resolve a Stream Socket Connection directing it via 802.11X?
    please help us!

  • J2ME AND GPRS

    Hi to all,
    Iam new in the field of j2me. I have developed a j2me program,that accessing internet by gprs. But in mobile, i don't know, what the things that i have to set. The mobile is gprs activated. But that application is still not working. Is there any other settings in mobile.?

    I'm quite rusty with j2me, and you don't give much info. Internet settings for java applications can (at least some years ago) vary very much for different devices. To get an answer to how your specific device should be configured, you're probably best off trying to find a more specific forum, preferably one about your particular device, but at least something focusing on j2me.

  • Difference btw J2ME and SAP MI

    Hi All,
    I have a basic doubt , what is difference btw J2ME and SAP MI.
    I understand while J2ME devlopment we develop MIDLET and how do we call the Midlet in Mibile ??
    What is the advantages of both and limitation of j2me , stopping me not use that and go for SAP MI
    Advantages of sap mi in a nustshell would be appreciated.
    Thanks for reply
    Regards
    Srinivas

    Hi Srinivas,
    SAP MI currently known as NetWeaver Mobile 7.10] could be seen as a technology platform to mobilise enterprise applications(for occassionaly connected / disconnected scenarios)
    Mobile consists of a server component named Data Orchestration Engine [DOE] and a java based Mobile client for Windows Mobile devices. DOE is an ABAP component that acts as an interface between your SAP/non-SAP Backend [like ERP, CRM etc] and the Mobile device by staging the data , distributing it to relevant receivers with extensive monitoring capabilities with a model driven approach.
    DOE talks to backend via Bapiwrappers / webservices and talks to mobile device (client running on the device) with a messaging protocol over http(s).
    Apart from the default java mobile client that is shipped from SAP , any custom client written in any native client technology could be integrated to DOE.
    There is also a co-innovation model along with partners like sybase where there are some mobile solutions already available in market like mobile sales that could be run on smart phones like iphone,blackberry etc.
    You can checkout several articles and blogs available in sdn itself for Mobile for understanding more about this .
    Regards,
    Liji

  • Whats is difference between Java JRE  and  Java SDK

    Hi,
    what is the difference between Java JRE and Java SDK...
    i think both of them have the same set of files to be installed...
    I am not able to understand where they differ

    The JRE (Java runtime Environment) contains just the stuff necessary to run Java and the SDK (System Development Kit) contains the extra stuff necessary (and also helpful) to develop in Java.

  • What is difference between C# Gzip and Java swing GZIPOutputStream?

    Hi All,
    I have a Java swing tool where i can compress file inputs and we have C# tool.
    I am using GZIPOutputStream to compress the stream .
    I found the difference between C# and Java Gzip compression while a compressing a file (temp.gif ) -
    After Compression of temp.gif file in C# - compressed file size increased
    while in java i found a 2% percentage of compression of data.
    Could you please tell me , can i achieve same output in Java as compared to C# using GZIPOutputStream ?
    Thank a lot in advance.

    797957 wrote:
    Does java provides a better compression than C#?no idea, i don't do c# programming. and, your question is most likely really: "does java default to a higher compression level than c#".
    Btw what is faster compression vs. better compression?meaning, does the code spend more time/effort trying to compress the data (slower but better compression) or less time/effort trying to compress the data (faster but worse compression). most compression algorithms allow you to control this tradeoff depending on whether you care more about cpu time or disk/memory space.

  • What is the diffrence between package javax.sql and java.sql

    Is javax designed for J2EE?
    And when to use package javax?

    Hi,
    What is the diffrence between package javax.sql and java.sql?The JDBC 2.0 & above API is comprised of two packages:
    1.The java.sql package and
    2.The javax.sql package.
    java.sql provides features mostly related to client
    side database functionalities where as the javax.sql
    package, which adds server-side capabilities.
    You automatically get both packages when you download the JavaTM 2 Platform, Standard Edition, Version 1.4 (J2SETM) or the JavaTM 2, Platform Enterprise Edition, Version 1.3 (J2EETM).
    For further information on this please visit our website at http://java.sun.com/j2se/1.3/docs/guide/jdbc/index.html
    Hope this helps.
    Good Luck.
    Gayam.Srinivasa Reddy
    Developer Technical Support
    Sun Micro Systems
    http://www.sun.com/developers/support/

  • What is the diffrence between My Runnable Interface and Java Runnable

    Hi folks
    all we know that interfaces in java just a decleration for methods and variables.
    so my Question is why when i create an interface its name is "Runnable" and i declared a method called "run" inside it.then when i implements this interface with any class don't do the thread operation but when i implement the java.lang.Runnable the thread is going fine.
    so what is the diffrence between My Runnable Interface and Java Runnable?
    thnx

    Hi folks
    all we know that interfaces in java just a decleration
    for methods and variables.
    so my Question is why when i create an interface its
    name is "Runnable" and i declared a method called
    "run" inside it.then when i implements this interface
    with any class don't do the thread operation but when
    i implement the java.lang.Runnable the thread is going
    fine.
    so what is the diffrence between My Runnable Interface
    and Java Runnable?
    thnxClasses and interfaces are not identified by just their "name", like Runnable. The actual "name" the compiler uses is java.lang.Runnable. So even if you duplicate the Runnable interface in your own package, it's not the same as far as the compiler is concerned, because it's in a different package.
    Try importing both java.util.* and java.awt.* (which both have a class or interface named List), and then try to compile List myList = new ArrayList();

  • Java SE and Java EE

    I am a IT graduate and I still need some clarification on the relationship between Java SE and Java EE API. Does EE include SE?
    For application development, I know I can use only SE without the EE, but can I use EE alone without SE?
    Any good articles addressing my questions?
    Thank you very much
    R

    Java EE in fact extends java SE, its primarily aim is to simplify developing multitier enterprise applications (Java SE provides all the necessary basic libraries etc.)
    Because Java EE is an extension of Java SE, you cant use EE without SE - without SE there is no EE.

  • SSO between Portal and Java WD application

    Hi Experts,
    I am using CE 7.2 on localhost and I am very new to SAP.
    I need to know how can I get SSO between Portal and Java WD.  I have a WD application that displays the logged in user using "IUser currentUser = WDClientUser.getCurrentUser().getSAPUser()", as well I can use "IUser user = UMFactory.getAuthenticator().getLoggedInUser()".  Both work.
    Q1. What is the difference in the 2 above?
    Q2. My WD application is set to authenticate user.  The WD application is in URL iView.  I need SSO between Portal and WD application.   Is there a way to get this SSO without SAP Backend (ECC), for now I just need SSO between Portal and Java WD appl.
    Everything is in localhost.
    Please advice. Thanks.

    > need to know how can I get SSO between Portal and Java WD.
    Then I suggest you ask your question in the Web Dynpro Java forum instead of the Web Dynpro ABAP one.

Maybe you are looking for