(JAAS) Getting LoginContext when using BASIC authentication

I am using basic authentication in JAAS to authenticate users for JSF web resources. My web.xml is configured as follows:
<login-config>
<auth-method>BASIC</auth-method>
<realm-name>eccgroup</realm-name>
</login-config>
How can I get hold of the LoginContext that (I assume) was created in order to logout?
The Principal is available on the HTTPRequest but I cannot find where the LoginContext is stored?

As far as I know, vendors are not required to rely on a JAAS LoginContext to perform BASIC auth. Different vendor implementations may do different things. So you may have to rely on a programmatic logout API, but I'm not personally aware of any standard API for this.

Similar Messages

Password Caching in SALT when using Basic Authentication?

We are experiencing an issue in which a user changes their logon password using a thick client application, but is unable to use the changed password when connecting to the same password store through the SALT gateway.
We suspect that either the browser or the SALT Gateway itself is caching the password. How is this designed to work? Do we have to send something in the header to force it use the password being sent?
We suspect the user is submitting the logon request from an existing browser window which authenticated against SALT prior to them changing the password in the thick client.
Thanks
Amin

As far as I know, vendors are not required to rely on a JAAS LoginContext to perform BASIC auth. Different vendor implementations may do different things. So you may have to rely on a programmatic logout API, but I'm not personally aware of any standard API for this.

How to log out using BASIC authentication

Hi,
we are using JSC and Sun Appserver8.
To authenticate we are using BASIC authentication and it works well.
Now we need to do a log out function because of new demands.
Is it possible to log out when using BASIC authentication ?
If so, how?
/Regards Krister

If you are using Basic Authentication, you may not be able to force log out. In that case you may have to use form based authentication.
Please read more details here
http://httpd.apache.org/docs/1.3/howto/auth.html
(Look at the topic How do I log out?)
- Winston
http://blogs.sun.com/winston

Interactive form using Basic Authentication

Hi,
I am getting the following problem when deploying the Adobe Interactive Form application developed using Basic Authentication onto the server.
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Error during call to AdobeDocumentServer: Processing exception during a "Render" operation.
Request start time: Tue Jul 04 12:04:51 GMT+05:30 2006
     at com.sap.tc.webdynpro.clientserver.adobe.AdobeFormHelper.createPDFDocumentForUIElement(AdobeFormHelper.java:486)
     at com.sap.tc.webdynpro.clientserver.uielib.adobe.impl.InteractiveForm.afterHandleActionEvent(InteractiveForm.java:185)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.afterHandleActionEvent(ClientApplication.java:1154)
     at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:402)
     at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:649)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
     at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:248)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:48)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Please suggest me, how I can solve it.
Also I have done only the Basic Authentication, so is there any need for SSL Configuration.
Regards
Tiffny

Hi Krishanu,
   Thanks for your responseI have checked the url that I had put in Web Service as http://versa:80/AdobeDocumentServices/Config?style=document
and when I run this url which seems to be working fine and on run it I test it, also it gives wsdl url which is
http://versa:80/AdobeDocumentServices/Config?wsdl&style=document
and on clicking this url it opens the xml document.
I have also checked the Log, where I find that
#1.5#00132120E8600063000000440000106C000417BF56A46124#1152010466682#com.adobe.AdobeDocumentServices#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServices#ADSUSER#8739#SAP J2EE Engine JTA Transaction : [038153a00111]###744037e00b4b11dbbc1700132120e860#SAPEngine_Application_Thread[impl:3]_32##0#0#Error#1#/System/Server#Plain###Processing exception during a "Render" operation.
Request start time: Tue Jul 04 16:24:23 GMT+05:30 2006
<b>com.adobe.ProcessingError: File not found error writing stream:</b> <Render><Template><Name> "http://versa:80/webdynpro/dispatcher/local/TravelRequest/TravelRequestApp/wd_keyHC0DDbOBtzpF0n9-a_pEPA==/sapwebdynpro.xft;jsessionid=(J2EE3675400)ID2045061650DB01945523008391574204End;saplb_*=(J2EE3675400)3675450?sap.session.download=4&sap-wd-cltwndid=7425f9200b4b11dbc43100132120e860&sap-wd-appwndid=Id7425f9200b4b11dbc43100132120e86011&sap-wd-norefresh=true :
java.io.FileNotFoundException: IO error detected while retrieving input stream for: http://versa:80/webdynpro/dispatcher/local/TravelRequest/TravelRequestApp/wd_keyHC0DDbOBtzpF0n9-a_pEPA==/sapwebdynpro.xft;jsessionid=(J2EE3675400)ID2045061650DB01945523008391574204End;saplb_*=(J2EE3675400)3675450?sap.session.download=4&sap-wd-cltwndid=7425f9200b4b11dbc43100132120e860&sap-wd-appwndid=Id7425f9200b4b11dbc43100132120e86011&sap-wd-norefresh=true :
java.io.IOException: Server returned HTTP response code: 503 for URL: http://versa:80/webdynpro/dispatcher/local/TravelRequest/TravelRequestApp/wd_keyHC0DDbOBtzpF0n9-a_pEPA==/sapwebdynpro.xft;jsessionid=(J2EE3675400)ID2045061650DB01945523008391574204End;saplb_*=(J2EE3675400)3675450?sap.session.download=4&sap-wd-cltwndid=7425f9200b4b11dbc43100132120e860&sap-wd-appwndid=Id7425f9200b4b11dbc43100132120e86011&sap-wd-norefresh=true
Can you tell me which file it is looking for.
Regards
Tiffny

Interactive Report - search does not work when using custom authentication

Apex 3.2.x
I can authenticate fine with my custom authentication and all of my pages work okay except for one page that uses the Interactive Report feature. When I click 'Filter' then enter the column name, operation (contains, =, like, etc.) and the expression, then click the 'Apply' button, the page just re-displays and my filter information is missing?
If I first login to Apex, select and run my application, the Interactive Report features work just fine. What's missing?

More information:
After login into my Apex workspace (development environment), when I display the Interactive Report and click debug I see this debug message:
"using existing session report settings"
When I login using my application's custom authentication and click debug I see this debug message:
"creating session report settings as copy of public saved report"
Based on this, it appears that my session info in not set correctly when using custom authentication... but I'm not sure what needs to be set.
Edited by: user9108091 on Oct 22, 2010 6:44 AM

HT201335 I can only get audio when using airplay through sky go on my apple tv on iphone 4

I cn only get audio when using airplay through sky go on my apple tv on iphone4. Any ideas?

Sky go is an app that does not support video AirPlay, not all apps do.

Error when using SAP authentication for Designer

my error is:
[repo_proxy 13] SessionFacade::openSessionLogon with user info has failed(The
secSAPR3 DLL could not be found or does not exist(hr=#0x80042a01)
can you help me?
regards

hi,
pls refer the link
Error when using SAP authentication for Designer
try re-installing BOE and check
hope it helps,
sundar

My iPhone was getting hot when used or charging. Went to Apple in Portland, OR.Phone making random sound. Why??? How do I make it stop????

My iPhone was getting hot when used or charging. Went to Apple in Portland, OR. I did a reset on the phone. My IPhone is now making a random sound. Why??? How do I make it stop???? I have turned off all notifications. I do not have life360 or Skype. I do have Facebook, WordsFree, ScrabbleFree, Pandora.

I did the reset. I updated the iPhone to 6.0. The alert sound stopped for a while then started again. I had to go to notifications a few times to turn off some of the alerts and now I have peace, plus I learned more about the notifications. Thanks for your help. I did not need to go to the Apple Store.

I pad get hot when using or charging what's wrong?

my ipad gets hot when using & charging - what's wrong/ also, the chrger gets hot enough that i unplug it

Not normal. Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

WHY THE IPHONE GETTING HOT WHEN USING 3G PLUS WITH DATa?, WHY THE IPHONE GETTING HOT WHEN USING 3G PLUS WITH DATA?

why my iphone 4s getting hot when using 3g plus with data?
then my phone left side speaker didnt work when i list songs?

It is normal for the phone to get hot when your using data such as YouTube videos, streaming music etc.. And as for the left speaker not working, the left speaker is a microphone, the right one is for sound. Don't worry, everything your iPhone is doing is normal.

Trouble with my ipod getting hot when useing instagram app and also problems with my ipod closeing and returning to home screen unexpectedly?

when i'm useing my ipod and i'm useing the instagram app. I feel my ipod starting to get really hot. i am also having problems useing app and them all a sudden closing on me and ipod will return to the home screen

It is not unusual for the to get worm when using some apps.
For the app problem see:
iOS: Troubleshooting applications purchased from the App Store

Help needed for using BASIC authentication through JDBCRealm

Help needed.
Hello,
I am doing a degree project, so far it works fine in my local machine, I need to try it on my virtual hosting (as it is a live server).
My project requires JDBCRealm, that is BASIC authentication loading access data from mysql database. Normally this setup can be done in Server.xml file, because my Tomcat hosting is a virtual one, I only have permission to access the web.xml file.
My question is: is it possible to get it done in an alternative way? In web.xml? Some properties file maybe?
Thank you very much.

You can set this up for your context using META-INF/context.xml instead of working with server.xml.
Make a directory called META-INF under your webapp ( it'll be at the same level as WEB-INF ). Under this, add a context.xml with all your context specific configuration including the realm. A sample is below
<?xml version="1.0" encoding="UTF-8"?>
<Context path="/myApp" reloadable="true">
    <Realm
        className="org.apache.catalina.realm.JDBCRealm"
        driverName="com.microsoft.jdbc.sqlserver.SQLServerDriver"
        connectionURL="jdbc:microsoft:sqlserver://127.0.0.1:1433;DatabaseName=myDB;SelectMethod=Cursor;"
        connectionName="username" connectionPassword="password"
        digest="MD5" userTable="users" userNameCol="userid" userCredCol="userpassword"
        userRoleTable="user_roles" roleNameCol="rolename"
    />
</Context>Hope this helps.
People on the forum help others voluntarily, it's not their job.
Help them help you.
Learn how to ask questions first: http://faq.javaranch.com/java/HowToAskQuestionsOnJavaRanch
----------------------------------------------------------------

Outlook 2013 - Exchange 2013 - Prompts for username and password when EWS basic authentication is enabled

So we have an Exchange 2013 environment, and a CRM solution that requires basic authentication to EWS internally. Problem is, after a reboot of our Exchange server, all of our Outlook clients begin prompting for username and password (which nothing
works) which also starts locking users AD accounts out due to failed login attempts (somehow). If I disabled basic authentication on EWS, Outlook authenticates as normal using NTLM and there are no issues. Once Outlook has authenticated, I can
turn back on basic authentication, and Outlook will be fine until the next time the Exchange server is rebooted.
Any ideas?

Hi,
According to your description, I understand that Outlook client prompted for username and password when Exchange server restart and basic authentication is enabled for EWS.
If I misunderstand your concern, please do not hesitate to let me know.
It’s normal. This caused by the difference between basic authentication and NTML authentication:
Basic, with any version of Outlook prior to 2010, results in a pop up dialog asking for creds. Outlook 2010 makes the 'save this password' actually work, so in an Outlook 2010 or later world, Basic can mean no need to authenticate every time you open/reconnect,
but in all earlier versions, you will have to enter creds every time.
NTLM, when used by a client that is domain joined and logged in with cached creds, results in the client simply sending the cached in creds to the server, resulting in what looks like a pretty seamless single sign on experience. However, if you want to do pre-authentication
at something like TMG, and not let the traffic go all the way to CAS, you need to configure TMG for this.
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support

Why does my dock get stuck when using full screen apps?

When using a full screen app like Safari, if I go back to my desktop and to the dock (which i keep minimized) it stays there when going back to the full screen app. I have to go back to the first page and hover over the dock to get it to go back. Not sure whats going on...

I may not have explained exactly...so basically when i go to the main desktop screen, and open a program or use the dock, it sometimes gets stuck in show mode. Then when i go back to the safari full screen app for instance, the dock stays up, with the latest program highlighted. In order to get the dock to go away, i need to go back to the desktop and hover over the dock again for it to hide.
I really hope someone else is experiencing this because its very annoying and I want apple to fix it quickly

Getting dump when using do_sum in alv field cat in the output of the report

Dear Freinds,
             Iam getting the alv report when i click on the segma field (Sum) on my salary
field iam getting dump. and also if i try to print my alv output iam getting dump , only
happening to my custom report.
i have used the following code pleae correct me .
This perform is used for Layout settings
perform st_layout_build using gs_layout.
form st_layout_build using st_ls_layout type slis_layout_alv.
   st_ls_layout-no_input          = 'X'.
st_ls_layout-colwidth_optimize = 'X'.
st_ls_layout-zebra             = 'X'.
st_ls_layout-detail_popup      = 'X'.
endform.                    " st_layout_build
Field Catalog details
perform st_fieldcat_init changing gt_fieldcat.
form st_fieldcat_init changing fp_i_fieldcat type slis_t_fieldcat_alv.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 1.
ls_fieldcat-fieldname    = 'ORGUNIT'.
ls_fieldcat-seltext_l    = 'Orgunit'.
ls_fieldcat-no_out       = 'X'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 2.
ls_fieldcat-fieldname    = 'ORGTEXT'.
ls_fieldcat-seltext_l    = 'Orgdesc'.
ls_fieldcat-no_out       = 'X'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-fieldname    = 'SALARY'.
ls_fieldcat-seltext_l    = 'Salary'.
ls_fieldcat-col_pos      = 3.
ls_fieldcat-outputlen   = 15.
ls_fieldcat-do_sum       = 'X'.
ls_fieldcat-datatype     = 'CURR'.    "CURR
append ls_fieldcat to fp_i_fieldcat.
endform.
Variant
perform st_variant_init using gs_variant g_repid.
form st_variant_init   using st_gs_variant type disvariant
                             st_repid      like sy-repid.
clear st_gs_variant.
st_gs_variant-report = st_repid.
endform.                    " st_variant_init
g_repid = sy-repid.
perform st_comment_build using gt_list_top_of_page[].
form st_comment_build using   st_lt_top_of_page type slis_t_listheader.
data: ls_line type slis_listheader.
Listenüberschrift: Typ H
clear ls_line.
ls_line-typ = 'H'.
LS_LINE-KEY: not used for this type
ls_line-info = text-000.
append ls_line to st_lt_top_of_page.
endform.                    " st_comment_build
     call function 'REUSE_ALV_GRID_DISPLAY'
      exporting
         i_buffer_active        = 'X'
        i_callback_top_of_page = 'TOP_OF_PAGE'
        i_callback_program     = g_repid
        is_layout              = gs_layout
        it_fieldcat            = gt_fieldcat[]
       i_structure_name       = 'i_final'   "c_i_final "'objec'
       i_save                 = g_save
        is_variant             = gs_variant
      tables
        t_outtab               = fp_i_pyrol_final
      exceptions
        program_error          = 1
        others                 = 2.
    if sy-subrc ne 0.
      message e018. " Displaying the ALV GRID has failed
    endif.
Please could any one let me know why iam getting dump when iam clicking for total
on my salary field.
Regards
latha

Dear Chandu,
my code iam giving in details
types : begin of ty_output_data,
        staffno     type pernr_d,
        staffname   type emnam,
        grade       type stell,
        orgunit     type orgeh,
        orgtext     type hr_mcstext,
        psgroup     type trfgr,      " Pay Scale Group
        salary      type maxbt,       "PAD_AMT7S,
        rrefunded   type pad_amt7s,
        leavepay    type pad_amt7s,
        mshortfal   type pad_amt7s,   " Medical Shortfall
        echkshfal   type pad_amt7s,   " Execute checkup shortfall
        ofindeduc   type pad_amt7s,   " Other Finance Deduction
        mtyprem     type pad_amt7s,   " maternity premium
        vpbonus     type pad_amt7s,   " VP/Bonus
        gratuity    type pad_amt7s,   " Gratuity
        vpay        type pad_amt7s,   " Variable pay
        mallowance type pad_amt7s,   " Meal Allowance
        overtime    type pad_amt7s,   " overtime
        other       type pad_amt7s, " OTHER
        pfundeecon type pad_amt7s,   " PFund Employee's Contribution
        banktrnsfer type pad_amt7s,   " Bank Transfer
        count       type i,
        end of ty_output_data.
data : i_final         type standard table of ty_output_data.
iam getting all my data in the internal table I_FINAL.
perform get_final_alv using i_final.
form get_final_alv using   fp_i_pyrol_final type ty_t_output_data.
*local variable declarations
data : l_v_idx      type sy-tabix.
*local work areas
data : l_wa_final type ty_output_data.
g_save = 'A'.
This perform is used for Layout settings
perform st_layout_build using gs_layout.
Field Catalog details
perform st_fieldcat_init changing gt_fieldcat.
Variant
perform st_variant_init using gs_variant g_repid.
g_repid = sy-repid.
perform st_comment_build using gt_list_top_of_page[].
if not fp_i_pyrol_final is initial.
    delete adjacent duplicates from fp_i_pyrol_final comparing all fields.
    call function 'REUSE_ALV_GRID_DISPLAY'
      exporting
         i_buffer_active        = 'X'
        i_callback_top_of_page = 'TOP_OF_PAGE'
        i_callback_program     = g_repid
        is_layout              = gs_layout
        it_fieldcat            = gt_fieldcat[]
       i_structure_name       = 'i_final'   "c_i_final "'objec'
       i_save                 = g_save
        is_variant             = gs_variant
      tables
        t_outtab               = fp_i_pyrol_final
      exceptions
        program_error          = 1
        others                 = 2.
    if sy-subrc ne 0.
      message e018. " Displaying the ALV GRID has failed
    endif.
endif.
endform.                    " get_final_alv
form st_layout_build using st_ls_layout type slis_layout_alv.
   st_ls_layout-no_input          = 'X'.
st_ls_layout-colwidth_optimize = 'X'.
st_ls_layout-zebra             = 'X'.
st_ls_layout-detail_popup      = 'X'.
endform.                    " st_layout_build
form st_fieldcat_init changing fp_i_fieldcat type slis_t_fieldcat_alv.
data: ls_fieldcat type slis_fieldcat_alv.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 1.
ls_fieldcat-fieldname    = 'ORGUNIT'.
ls_fieldcat-seltext_l    = 'Orgunit'.
ls_fieldcat-no_out       = 'X'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 2.
ls_fieldcat-fieldname    = 'ORGTEXT'.
ls_fieldcat-seltext_l    = 'Orgdesc'.
ls_fieldcat-no_out       = 'X'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 5.
ls_fieldcat-fieldname    = 'STAFFNAME'.
ls_fieldcat-no_out       = 'X'.
ls_fieldcat-seltext_l    = 'StaffName'.
append ls_fieldcat to fp_i_fieldcat.
   clear ls_fieldcat.
ls_fieldcat-col_pos      = 4.
ls_fieldcat-fieldname    = 'STAFFNO'.
ls_fieldcat-no_out       = 'X'.
ls_fieldcat-seltext_l    = 'StaffNo.'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 6.
ls_fieldcat-fieldname    = 'GRADE'.
ls_fieldcat-seltext_l    = 'Grade'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 3.
ls_fieldcat-fieldname    = 'COUNT'.
ls_fieldcat-seltext_l    = 'Headcount'.
append ls_fieldcat to fp_i_fieldcat.
if the field name is 'Salary' then do a sum on this field.
IF fp_fname = c_betrg.
    l_wa_fieldcat-do_sum    = c_x.
ENDIF.
NOTE : IAM GETTING PROBLEM IN THE BELOW SALARY.
IAM JUST CHECKING ITSELF NOT ALLOWING ME TO EXECUTE
clear ls_fieldcat.
ls_fieldcat-fieldname    = 'SALARY'.
ls_fieldcat-seltext_l    = 'Salary'.
ls_fieldcat-col_pos      = 7.
ls_fieldcat-outputlen   = 20.
ls_fieldcat-do_sum       = 'X'.
ls_fieldcat-datatype     = 'CURR'.    "CURR
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 9.
ls_fieldcat-fieldname    = 'LEAVEPAY'.
ls_fieldcat-seltext_l    = 'Leave Pay'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 10.
ls_fieldcat-fieldname    = 'MSHORTFAL'.
ls_fieldcat-seltext_l    = 'Med.Sfall'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 11.
ls_fieldcat-fieldname    = 'ECHKSHFAL'.
ls_fieldcat-seltext_l    = 'EX.Chckup.Sfall'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 12.
ls_fieldcat-fieldname    = 'OFINDEDUC'.
ls_fieldcat-seltext_l    = 'Oth.Fin.Deduction'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 13.
ls_fieldcat-fieldname    = 'MTYPREM'.
ls_fieldcat-seltext_l    = 'Mat.Premium'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 14.
ls_fieldcat-fieldname    = 'VPBONUS'.
ls_fieldcat-seltext_l    = 'VP/Bonus'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 15.
ls_fieldcat-fieldname    = 'GRATUITY'.
ls_fieldcat-seltext_l    = 'Gratuity'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 16.
ls_fieldcat-fieldname    = 'VPAY'.
ls_fieldcat-seltext_l    = 'Variable Pay'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 17.
ls_fieldcat-fieldname    = 'MALLOWANCE'.
ls_fieldcat-seltext_l    = 'Meal.Allowance'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 18.
ls_fieldcat-fieldname    = 'OVERTIME'.
ls_fieldcat-seltext_l    = 'Overtime'.
append ls_fieldcat to fp_i_fieldcat.
    clear ls_fieldcat.
ls_fieldcat-col_pos      = 19.
ls_fieldcat-fieldname    = 'OTHER'.
ls_fieldcat-seltext_l    = 'Other'.
append ls_fieldcat to fp_i_fieldcat.
pfundeecon
clear ls_fieldcat.
ls_fieldcat-col_pos      = 20.
ls_fieldcat-fieldname    = 'P FUND EMPLOYEES CONTRIBUTION'.
ls_fieldcat-seltext_l    = 'P.Fund.Emp.Contrib'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 21.
ls_fieldcat-fieldname    = 'BANKTRNSFER'.
ls_fieldcat-seltext_l    = 'Payment'.
append ls_fieldcat to fp_i_fieldcat.
endform.                    " st_fieldcat_init
form st_variant_init   using st_gs_variant type disvariant
                             st_repid      like sy-repid.
clear st_gs_variant.
st_gs_variant-report = st_repid.
endform.                    " st_variant_init
form st_comment_build using   st_lt_top_of_page type slis_t_listheader.
data: ls_line type slis_listheader.
Listenüberschrift: Typ H
clear ls_line.
ls_line-typ = 'H'.
LS_LINE-KEY: not used for this type
ls_line-info = text-000.
append ls_line to st_lt_top_of_page.
endform.                    " st_comment_build
      FORM TOP_OF_PAGE                                              *
form top_of_page.
data: l_i_detailheader type slis_t_listheader.
To get the header for ALV
perform detail_header changing l_i_detailheader.
call function 'REUSE_ALV_COMMENTARY_WRITE'
    exporting
      it_list_commentary = l_i_detailheader.
endform.                    "top_of_page
form detail_header changing fp_i_detailheader type slis_t_listheader.
data: l_wa_header       type slis_listheader,
        l_v_time         type slis_edit_mask,
        l_v_date         type slis_edit_mask,
        l_v_abkrs        type char5,
        l_v_pabrj        type char8,
        l_v_pagno        type char10.
Local Constants
constants: l_c_h type char1 value 'H',
             l_c_1 type i     value '1',
             l_c_edit type char10 value '__.__.____',
             l_c_slash type c value '/'. " constant for slash
To display the report Header
l_wa_header-typ = l_c_h.
WRITE sy-repid TO l_wa_header-info LEFT-JUSTIFIED.
write text-014 to l_wa_header-info left-justified.
append l_wa_header to fp_i_detailheader.
clear l_wa_header.
To display the Page no
l_v_pagno =   sy-pagno + l_c_1.
l_wa_header-typ = c_s.
l_wa_header-key = text-008. " Page No:
l_wa_header-info = l_v_pagno.
append l_wa_header to fp_i_detailheader.
clear l_wa_header.
To Display the User ID
l_wa_header-typ = c_s.
l_wa_header-key = text-009. " User ID
l_wa_header-info = sy-uname.
append l_wa_header to fp_i_detailheader.
clear l_wa_header.
To Display the Date/Time
l_wa_header-typ = c_s.
l_wa_header-key = text-010. " Date/Time:
l_v_time = sy-uzeit.
l_v_date = sy-datum.
write: sy-uzeit to l_v_time.
write sy-datum to l_v_date using edit mask l_c_edit.
concatenate l_v_date
              l_c_slash
              l_v_time into l_wa_header-info+0(25) separated by space.
append l_wa_header to fp_i_detailheader.
clear: l_wa_header, l_v_date.
To Display the Report Description
l_wa_header-typ = c_s.
l_wa_header-key = text-011.                " Report Description
l_wa_header-info = text-012.
append l_wa_header to fp_i_detailheader.
clear l_wa_header.
append l_wa_header to fp_i_detailheader.
endform.                    " detail_header
I will be greatful if any one can please help me in removing me the dump.
REGARDS
LATHA.

(JAAS) Getting LoginContext when using BASIC authentication

Similar Messages

Maybe you are looking for