Jabber config file

1. Is there a way to have a jabberconfig.xml for each client version or for certain groups of people.
Wanting to seperate config files so I can have our pilot group testing the next version and being able to use the update feature i.e (12.x)and Production users also being able to use update but not getting the version in pilot just the next production version i.e. 10.x
version numbers are for explnation only and not equating to any real numbers.

That's explained in the admin guide
Create Group Configurations
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/jabber/Windows/9_0_1/b_jabber_win_icg_chapter_01010.html#JABW_TK_C6D444A8_00
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Similar Messages

Details of jabber-config.xml

Is there any place on the net that has a listing of all the possible switches for the jabber-config.xml file? I saw on another post that it was possible to force jabber to start automatically using the config file, but then went on to say how to do it in the registry. No explanation was given for how to add that switch to the config file.
There may be more options worth purusing as well, but without knowing what options are potentially available, I have no idea which to use.
Thanks,

The Jabber for Windows Administration Guide explains many of the available elements. I suggest you use the Jabber Config File Generator instead of going at it manually; it does a great job of building the file for you.
Please remember to rate helpful responses and identify helpful or correct answers.

Jabber for windows 9.2.1 - InitialPhoneSelection doesn't work if configuration is in custom config file

Hi,
my customer wanted set InitialPhoneSelection to deskphone mode, when users firs run Jabber for Windows (ver. 9.2.1).
I created custom config (configurationfile=jabber-config-deskphone.xml) but it doesn't work.
Policies>
<InitialPhoneSelection>deskphone</InitialPhoneSelection>
</Policies>
I tested it couple times and at the end I tried put configuration to default jabber-config.xml and ... this functionality start working...
Could you check guys if you have same problem with custom config file? I think that it is bug. Maybe other option don't work in custom config file.
Thanks a lot
Pavel

Hi Pavel,
This setting is only when the client is installed and started by the user for the first time. After that the client will save the user preference (what was the phone selection when the user exited the client) and use it in subsequent logins.
Having said that, can you please specify in details how exactly you did your tests or maybe test again taking the above into consideration ?
Thanks,
Christos

Jabber-config.xml file, settings do not apply

hi
as i have a very simple setup i never used a jabber-config.xml file but as i have some display name issues and i thought it would be good to set some other settings as well i created a file but for some reason the settings do not seem to stick (do not show picture, docked window top right, presence server type
in internet explorer and notepad the file looks fine but when i paste it in here there seem to be line breaks.
below is my file
<?xml version="1.0" encoding="utf-8"?>
<config version="1.0">
<Presence>
   <PresenceServerType>CUP</PresenceServerType>
</Presence>
<Directory>
   <DirectoryServerType>EDI</DirectoryServerType>
   <ConnectionType>0</ConnectionType>
   <PrimaryServerName>uk-dc2.domain.com</PrimaryServerName>
   <ServerPort1>3268</ServerPort1>
   <SecondaryServerName>uk-dc1.domain.com</SecondaryServerName>
   <ServerPort2>3268</ServerPort2>
   <UseWindowsCredentials>1</UseWindowsCredentials>
   <UseSSL>0</UseSSL>
   <UseSecureConnection>0</UseSecureConnection>
   <CommonName>cn</CommonName>
   <DisplayName>displayName</DisplayName>
   <FirstName>givenName</FirstName>
   <LastName>sn</LastName>
   <EmailAddress>mail</EmailAddress>
   <SipUri>msRTCSIP-PrimaryUserAddress</SipUri>
   <PhotoSource>thumbnailPhoto</PhotoSource>
   <BusinessPhone>telephoneNumber</BusinessPhone>
   <MobilePhone>mobile</MobilePhone>
   <HomePhone>homePhone</HomePhone>
   <OtherPhone>otherTelephone</OtherPhone>
   <Title>title</Title>
   <CompanyName>company</CompanyName>
   <UserAccountName>sAMAccountName</UserAccountName>
   <DomainName>userPrincipalName</DomainName>
   <Location>co</Location>
   <Nickname>Nickname</Nickname>
   <PostalCode>postalCode</PostalCode>
   <City>l</City>
   <State>st</State>
   <StreetAddress>streetAddress</StreetAddress>
   <BaseFilter>(&(objectCategory=person))</BaseFilter>
   <PredictiveSearchFilter>anr=</PredictiveSearchFilter>
   <DisableSecondaryNumberLookups>0</DisableSecondaryNumberLookups>
   <SearchTimeout>5</SearchTimeout>
   <UseWildcards>1</UseWildcards>
   <MinimumCharacterQuery>3</MinimumCharacterQuery>
   <SearchBase1>ou=domain Users,dc=domain,dc=com</SearchBase1>
   <PhotoUriSubstitutionEnabled>false</PhotoUriSubstitutionEnabled>
   <UseSIPURIToResolveContacts>false</UseSIPURIToResolveContacts>
</Directory>
<Policies>
   <Screen_Capture_Enabled>true</Screen_Capture_Enabled>
   <File_Transfer_Enabled>true</File_Transfer_Enabled>
   <EnableVideo>false</EnableVideo>
   <InitialPhoneSelection>deskphone</InitialPhoneSelection>
   <UserDefinedRemoteDestinations>false</UserDefinedRemoteDestinations>
   <enableLocalAddressBookSearch>true</enableLocalAddressBookSearch>
   <EnableAccessoriesManager>false</EnableAccessoriesManager>
   <ForceFontSmoothing>true</ForceFontSmoothing>
</Policies>
<Options>
   <Set_Status_Away_On_Inactive>true</Set_Status_Away_On_Inactive>
   <Set_Status_Inactive_Timeout>15</Set_Status_Inactive_Timeout>
   <Set_Status_Away_On_Lock_OS>true</Set_Status_Away_On_Lock_OS>
   <StartCallWithVideo>false</StartCallWithVideo>
   <Start_Client_On_Start_OS>true</Start_Client_On_Start_OS>
   <AllowUserCustomTabs>false</AllowUserCustomTabs>
   <ShowContactPictures>false</ShowContactPictures>
   <ShowOfflineContacts>true</ShowOfflineContacts>
   <DockedWindowVisible>true</DockedWindowVisible>
   <DockedWindowPosition>TopRight</DockedWindowPosition>
</Options>
</config>

when a user logs in for the first time and then exits jabber and logsin again the contact pictures are now no longer showing so those setttings seems to stick on the 2nd login
but not the docked window setting for instance

Auto update via Jabber-Config.xml file

All,
I wan't to force J4W updates via the jabber-config.xml file, but that's the only thing I want to do. Can the jabber-config.xml file be populated only with the auto update option and nothing else so the user still has control over their own client's options? Or, do the rest of the options need to be defined within the xml file as well? The install guide seems to indicate that one can pick and choose the J4W options they want to globally set within the jabber-config.xml file, but it's not entirely clear.
Thanks,
Joe.

Hi Joe,
yes, you are right. You only have to define settings in the jabber-config.xml file that are not default. Everything else stays default.
Regards
Andre

Jabber for MAC 9.2.1 doesn't use jabber-config.xml

Hi all,
I'm deployng jabber for mac 9.2.1 with on premises IM&Presence (9.1) and CUCM (9.1)
All works fine (jabber for windows, for tablet and Ipad). The only issue seem to be with Jabber for MAC. The search in corporate Directory fail.
Below you could find a parte of the log:
2013-12-11 17:08:38,822 INFO [0xb038d000] [adapters/config/TftpConfigStore.cpp(295)] [TftpConfigStore] [attemptTftpFileDownload] - Downloading file http://10.145.0.22:6970/jabber-config.xml.........
2013-12-11 17:08:38,822 DEBUG [0xb038d000] [apters/config/ConfigStoreManager.cpp(34)] [ConfigStoreManager] [addStore] - Adding ConfigStore with name: [tftpOverrideConfigStore] and priority: [29]
2013-12-11 17:08:38,822 DEBUG [0xb0595000] [ttpdownloader/src/HttpDownloader.cpp(43)] [http-downloader] [SynchronousDownloadToString] - Entering SequentialDownloadToString: http://10.145.0.22:6970/jabber-config.xml
2013-12-11 17:08:38,822 DEBUG [0xb038d000] [apters/config/ConfigStoreManager.cpp(42)] [ConfigStoreManager] [addStore] - Updating existing store
2013-12-11 17:08:38,822 DEBUG [0xb038d000] [s/adapters/config/XmlConfigStore.cpp(81)] [XmlConfigStore] [persistValues] - XmlConfigStore::persistValues() should not be called on read only store
2013-12-11 17:08:38,822 DEBUG [0xb038d000] [s/adapters/config/ConfigAdapter.cpp(598)] [ConfigAdapter] [areMandatoryStoresLoaded] - Primary ConfigStore [PresenceConfigStore] not found, config service not yet ready
2013-12-11 17:08:38,822 DEBUG [0xb038d000] [s/adapters/config/ConfigAdapter.cpp(598)] [ConfigAdapter] [areMandatoryStoresLoaded] - Primary ConfigStore [TFTPConfigStore] not found, config service not yet ready
2013-12-11 17:08:38,822 DEBUG [0xb038d000] [s/adapters/config/ConfigAdapter.cpp(367)] [ConfigAdapter] [fireIfConfigReady] - ConfigStore that isn't TFTP not ready setting configReady to false
I don't Understand why the clients download the jabber-config.xml but can't use it.
Someone could help me Please?
BR,
Luca.

in case you didn't see it
https://supportforums.cisco.com/thread/2252436?tstart=0
That should help you out.

Jabber-config for IOS devices - Set_Status_Inactive_Timeout option \ chat problem

Is there any possibility to change Set_Status_Inactive_Timeout for IOS clients to 60 min or to disable it with jabber-config.xml file? I've changed Set_Status_Inactive_Timeout option but int take no effect. After user log in to device the Set_Status_Inactive_Timeout is default 15 min (even after jabber reset).
The main goal is to set this timeout by jabber-config but not users. And the main problem is that the user that goes inactive and is in active chat don't receive messages from other participants of chat any more (simply leaves it).
maybe persistent chat can save the situation but our CUMP (v 9.1.1) can not implement this option.
CUCM v. 9.1.2
Jabber IOS Ipad v. 10.5.2

After contacting Cisco TAC no solution to this problem was provided they said "" As of now we don’t have this timer, Set_Status_Inactive_Timeout, yet supported on IPad". So maybe later they will provide this function in updated app.

Struggling to understand Service Profiles and jabber-config.xml

Hi,
I am doing my first Jabber 9.1 deployment and am striggling to understand the use of Service Profiles.
Lots of documentation I have seen states that the jabber-config.xml file should be manually edited then uploaded to the CUCM TFTP servers.
However much of the information contained in this file seems to be the same as that specified in Service Profiles.
When should I use Service Profiles? - do they generate the default jabber-config.xml file or do they have some other purpose?
The documentation seems confused and contradictory!
Thanks

Neither wins. The client will use one or the other depending on the platform and version.
I am struggling to like Jabber - it seems there is a lack of quality documentation and lots of gotchas for the unwary.
I can sympothize with that opinion. There is documentation but it sort of assumes you already know how the puzzle should look and only need guidence on completing individual tasks. The gotchas are a byproduct of the speed they are running development at. IMO this will settle down a bit around the 10.0 release of the *clients* (which will be after the system release of the server software). Every solution has gotchas, we're just a bit battle-weary of them on this one.
For the moment, Jabber mastery is sort of a rare skillset similar to CCX: many can script, few can do it well. Few can make Jabber "sing" at the moment.
Please remember to rate helpful responses and identify helpful or correct answers.

Jabber-config.xml no longer UTF-8 after TFTP Server upload?

I have a good jabber-config.xml I edited in Notepad++ and saved (UTF-8) and I upload it to TFTP via CMPlatform on CCM 9.1.2.11900-12. I've done this in the past a lot with 8.6.2, never had any issues.
I then restart CUCM TFTP services and download;
C:\>tftp 10.7.8.3 GET jabber-config.xml
Transfer successful: 2390 bytes in 1 second(s), 2390 bytes/s
I then open up my downloaded jabber-config.xml in Notepad++ and it says the file format is UCS-2 Litle Indian and not UTF-8 and looks like the attached photo. Greek. I tried in Notepad++ to convert.
I then setup a different test PC with Windows XP, etc. Same issue, also note that plain notepad sees the same problem. Why is the jabber-config.xml file getting corrupted by the TFTP server?

ChojinDSL wrote:Do you have a firewall running on that server?
Are your clients also using systemd?
Yes I do have a firewall, iptables, and it's the same configuration from before the migration to systemd. Also note that I can access the shares when explicitly defining the path whether that's in a File Manager, cli or other so access isn't being blocked. For lack of a better explanation the whole thing gives the appearance that although the Share is active it's just not broadcasting it's existence like it should be.
I have two PC's, both Arch, one with Openbox and one running KDE that I have migrated to systemd. Both can access the Share when the path is explicitly defined but don't see it when trying to just browse for the the Share. I have a Xoom tablet, running Android Jelly Bean, that exhibits the same behavior. I also have two media players, one an older WD LiveTV Plus model the other a newer WD LiveTV model, neither of which can see the share and browsing is the only option for those devices. So I've got a pretty good assortment of devices and operating systems that could see the share when browsing previously but can not see the same share by browsing since the migration to systemd on the file server.
Thank you.

IChat Server Config File

Where is the manual config file for this service located?

Choose Go to Folder from the Finder's Go menu and provide /etc/jabber/ as the path; the file may be named jabber.xml.
(34893)

"Unable to open config file" Error when starting tomcat

hi all,
Here is the output from two of the log files when I start tomcat4 on my linux box. I have configured the mod_jk on the tomcat side.
From the output of the second log file, it seems that the ajp13 worker I defined was started successfully. What I don't understand is the following:
1) In catalina.out, where des the line 'Unable to open config file' come from? Which config file?
2) Tomcat4 is supposed to generate a mod_jk.conf automatically, but I don't see any file generated in 'conf/auto/'.
Content of 'catalina.out'
Unable to open config file
Starting service Tomcat-Standalone
Apache Tomcat/4.0.4
Unable to open config file
Starting service Tomcat-Apache
Apache Tomcat/4.0.4content of 'catalina_log.2002-08-16.txt'
2002-08-16 01:05:22 HttpConnector Opening server socket on all host IP addresses
2002-08-16 01:05:28 Ajp13Connector[8009] Opening server socket on all host IP addresses
2002-08-16 01:05:28 Ajp13Connector[8009] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][0] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][1] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][2] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][3] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][4] Starting background thread

I have all those files too.
I think the 'config file' mentioned in the error log is the mod_jk.conf.
On Jason Hunter's tomcat4 guide, it says don't use the tomcat4 RPM to installed. What is the difference bettween the RPM version and the tar.gz version? The only difference I can think of is that in the RPM version, the conf directory is in the 'etc/tomcat4/conf'. Could it be the reason that tomcat4 cannot read the config file? But it has no problem reading the server.xml though.

SQL Agent Job failing - not using credentials in the config file for Data source

Hi
We have an SSIS pkg, that is secheduled as SQL Agent job using proxy account. The pkg contanins data source for connecting different SQL servers and the proxy account do not have access to the external DBs. The data source credentials are stored in the Config
file.
Why the job is not using the credentials in the config file and try to use the proxy account and failing.
Do the proxy account need access to all the external dbs in the pkg, and then what is the purpose of the config file.
I am sorry, i am not SSIS person trying to understand. If any one can explain tha will be great!!
Thank you!
VR

Please take a look at these URLs:
Schedule a Package by using SQL Server Agent
SSIS package does not run when called from a SQL Server Agent job step
Cheers,
Saeid Hasani
Database Consultant
Please feel free to contact me at [email protected] as well as on Twitter and Facebook.
[My Writings on TechNet Wiki] [T-SQL Blog] [Curah!]
[Twitter] [Facebook] [Email]

HttpBinding not working when HttpHandler tag is present in web.config file

Hi,
I tried to add a WCF service in WCF Test Client using HttpBinding. But I couldn't add the service. I got the below error.
There was an error downloading 'http://localhost/Services/PostOffice.svc/_vti_bin/ListData.svc/$metadata'.
The request failed with an empty response.
Metadata contains a reference that cannot be resolved: 'http://localhost/Services/PostOffice.svc'.
The server did not provide a meaningful reply; this might be caused by a contract mismatch, a premature session shutdown or an internal server error.
If the service is defined in the current solution, try building the solution and adding the service reference again.
I removed the below code in the Web.Config, later I was able to add the WCF service to the WCF test client.
<httpHandlers>
<add type="System.ServiceModel.Activation.HttpHandler, System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" path="Telerik.ReportViewer.axd" verb="*" validate="true" />
</httpHandlers>
I'm not sure with the above code. Could you please let me what is the reason behind it and what is the use of above code and if I remove it how does it affect my application.
Thanks in advance.
Sandeep

Hi Sandeep Pinniti,
Please try to add the following config in your config file:
<system.webServer>
<validation validateIntegratedModeConfiguration="false"/>
The validateIntegratedModeConfiguration="false" will allow us to keep our httpHandlers section populated without throwing an error. And I have tested in my side,
it works fine.
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Changing the Crystal Report dependency from 10.2 to 11.5 using config file

Hi,
We have an windows application in .net 2.0, which refers to Crystal Report 10.2 version. Now the dependency was being upgraded to 11.5. But we do not have the exact source code for the executable to change the dependency from 10.2 to 11.5.
I have installed the CR 11.5 to the testing machine and tried to open the appilcation. it failed saying CR 10.2 dlls were missing
Then I changed the .net config files to change the dependency assembly as follows
<runtime>
     <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
       <dependentAssembly>
         <assemblyIdentity name="CrystalDecisions.CrystalReports.Engine" publicKeyToken="692fbea5521e1304" culture="neutral" />
         <bindingRedirect oldVersion="10.2.3600.0" newVersion="11.5.3700.0"/>
       </dependentAssembly>
       <dependentAssembly>
         <assemblyIdentity name="CrystalDecisions.ReportSource" publicKeyToken="692fbea5521e1304" culture="neutral" />
      <bindingRedirect oldVersion="10.2.3600.0" newVersion="11.5.3700.0"/>
       </dependentAssembly>
       <dependentAssembly>
         <assemblyIdentity name="CrystalDecisions.Shared" publicKeyToken="692fbea5521e1304" culture="neutral" />
      <bindingRedirect oldVersion="10.2.3600.0" newVersion="11.5.3700.0"/>
       </dependentAssembly>
       <dependentAssembly>
         <assemblyIdentity name="CrystalDecisions.Windows.Forms" publicKeyToken="692fbea5521e1304" culture="neutral" />
      <bindingRedirect oldVersion="10.2.3600.0" newVersion="11.5.3700.0"/>
       </dependentAssembly>
      </assemblyBinding>
</runtime>
Now the application launched with out any issues. I thought the problem was sorted out.
But when I tried to generate the report, there comes the problem
During the report generation, I am getting the following error
Crystal Reports
An error has occurred while attempting to load the Crystal Reports runtime.
Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly.
Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. Please go to http://www.businessobjects.com/support for more information.
OK
I do not want to install the 10.2 redistributable in teh machine also do not want to re-compile the sources changing the dependency
Is there any way to achieve this ?
Any help is much appreciated.
Thanks
Edited by: Balaji Narasimhan on Aug 3, 2009 5:28 PM

No way that I know of. I believe once you change the dependency, you will have to recompile the project. Installing CR 10.2, may get this to work, but the app will most likely use the 10.2 references. Let's see if anyone else has any ideas.
Ludek

XML file in the form of .config file how to convert it to class and store it in single object

Hi,
I have a config file in which i have to convert it to class and get an object.
example:
<?xml version="1.0" encoding="utf-8" ?>
<xyz xmlns="">
<Container name ="Basic">
<Connectivity user="" server="" protocol="udp"/>
<Connectivity user="" server="" protocol="udp"/>
</Container>
<Container name ="Cp">
<settings version="1.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://www.counterpath.com/cps">
<domain name="audio">
<section name="headset">
<setting name="audio_in_agc_enabled " value="1"/>
</section>
<section name="incoming">
<setting name="use_agc" value="1"/>
</section>
<section name="vad">
</section>
</domain>
<domain name="system">
<section name="qos">
<setting name="audio" value="tos 46"/>
</section>
<section name="dtmf">
<setting name="force_send_in_band" value="0"/>
<setting name="minimum_rfc2833_play_time" value="40"/>
</section>
<section name="network">
<setting name="dtx_enabled" value="0"/>
</section>
<section name="diagnostics">
<setting name="enable_logging" value="1"/>
<setting name="log_level" value="Error"/>
</section>
<section name="general">
<setting name="add_OS_version_to_user_agent_header" value="1"/>
</section>
<section name="indialog_notify">
<setting name="enable_indialognotify" value="1"/>
</section>
</domain>
<domain name="rtp">
<section name="2833">
<setting name="enabled" value="1"/>
<setting name="packet_time_in_ms" value="60"/>
<setting name="payload_number" value="101"/>
</section>
<section name="inactivity">
<setting name="timer_enabled" value="0"/>
</section>
</domain>
<domain name="proxies">
<section name="proxy0">
</section>
<section name="proxy1">
</section>
</domain>
<domain name="ggg">
<section name="device">
<setting name="use_headset" value="1"/>
<setting name="rrr" value="1"/>
<setting name="eee" value="480"/>
<setting name="eme" value="hhh"/>
<setting name="headset_name" value="vvv"/>
<setting name="manual_audio_devices_configure" value="0"/>
<setting name="audio_in_device" value=""/>
<setting name="audio_out_device" value=""/>
<setting name="ringer_device" value=""/>
</section>
<section name="system">
<setting name="export_settings" value="EndpointSettings.xml"/>
<setting name="enable_export_settings" value="0"/>
<setting name="log_level_AbstractPhone" value="0"/>
<setting name="log_level_Audio" value="0"/>
<setting name="log_level_Auto Configuration" value="0"/>
<setting name="log_level_CCM" value="0"/>
<setting name="log_level_Conferencing" value="0"/>
<setting name="log_level_Contacts" value="0"/>
<setting name="log_level_DNS" value="0"/>
<setting name="log_level_GUI" value="0"/>
<setting name="log_level_Jitter" value="0"/>
<setting name="log_level_Licensing" value="0"/>
<setting name="log_level_Media" value="0"/>
<setting name="log_level_Privacy" value="0"/>
<setting name="log_level_RTP" value="0"/>
<setting name="log_level_STUN" value="0"/>
<setting name="log_level_Security" value="0"/>
<setting name="log_level_Storage" value="0"/>
<setting name="log_level_Transport" value="0"/>
<setting name="log_level_USB Devices" value="Info"/>
<setting name="log_level_Utilities" value="0"/>
<setting name="log_level_Video" value="0"/>
<setting name="log_level_Voice Quality" value="0"/>
<setting name="log_level_XMPP" value="0"/>
<setting name="log_level_Endpoint" value="6"/>
</section>
<section name="beeptone">
<setting name="play_locally" value="0"/>
<setting name="enable_beeptone" value="1"/>
<setting name="beeptone_file" value="beep.wav"/>
<setting name="beeptone_timeout" value="30000"/>
</section>
<section name="dtmf">
<setting name="play_locally" value="1"/>
<setting name="pause_start_stop_dtmf" value="100"/>
</section>
<section name="control">
<setting name="auto_answer" value="0"/>
</section>
<section name="ctrol">
<setting name="auto_ans" value="0"/>
</section>
</domain>
</settings>
</Container>
</xyz>
Please help me out in creating an object from it.
Thanks,
Hiranmayee

It's one of those things you usually start from the other end.
IE with a class and then serialise / deserialize to xml.
Because you have a namespace in there:
<settings version="1.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://www.counterpath.com/cps">
I think you will find linq to xml will have issues with that.
You could still use xpath to pick data out of there and there's been a thread on the c# forum recently which is relevent:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/2dc0581e-f2fd-4fd3-89ee-e59280c398e6/read-xml?forum=csharpgeneral
Why do you want to turn that into an object?
By the way.
This isn't a wpf question and you should probably have posted it on the c# forum.
Hope that helps.
Recent Technet articles: Property List Editing;
Dynamic XAML

Jabber config file

Similar Messages

Maybe you are looking for