Java 1.4.2 requirements in Linux for running in headless mode
Hi,
I need to generate graphics in a Linix server running jdk 1.4.2, but it has no X-windows installed.
I would like to know if it is required to have x-windows installed, or is it required to be present only some libraries, like GD, pnglib, etc?
Regards,
Gabriel
You could use JVM 1.3.X because it uses SSL from the Internet Explorer, not the JSSE SSL.
Apart of this, you could see if the implementation of PKCS#11 for the forthcoming J2SDK 1.5 works with your card AND if JSSE can use the PKCS#11 Sun Provider. Download the beta and try it.
Similar Messages
-
Windows 7 no longer requires hardware virtualization to run Win XP mode
See this link You still need to have Win 7 Pro of higher to run it. The XP mode will use hardware virtualization if it's present.
Thanks for your quick response.
I have Norton installed on my host WIN 7 system.
This is my Host machine's ipConfig
Wireless LAN adapter Wireless Network Connection:
Connection-specific DNS Suffix . : Trendnet
Link-local IPv6 Address . . . . . : fe80::ddd:5fd1:2994:5a11%13
IPv4 Address. . . . . . . . . . . : 192.168.10.102
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.10.1
Ethernet adapter Local Area Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : pen.apac.dell.com
Tunnel adapter Local Area Connection* 11:
Connection-specific DNS Suffix . :
IPv6 Address. . . . . . . . . . . : 2001:0:4137:9e76:185e:2eb9:3f57:f599
Link-local IPv6 Address . . . . . : fe80::185e:2eb9:3f57:f599%12
Default Gateway . . . . . . . . . : ::
Tunnel adapter isatap.pen.apac.dell.com:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter isatap.Trendnet:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
My Win XP mode IPConfig
Windows IP Configuration
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 192.168.131.65
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.131.254
In XP mode default windopws firewall is ON
and in the Host machine Norton firewall is enabled.
and I did not enable the ping response [i thought by default ii is enabled, isn't?
Thanks again,
-Sujith -
Sun java web server for Zlinux (Linux for System Z)?
Hi
thank you for reading my post
Is there any version of Sun java web server available for Z linux?
Or its better to say whether linux edition of sun java web server run under Zlinux (linux for System Z)
thanksNo version of Web Server is certified on ZLinux.
-
Required RPM's for suse linux 11 for 11.2.0.3 installation
Hi all,
O.S - SUSE Linux Enterprise Server 11 (x86_64)
Db - 11.2.0.3
I am installing 11.2.0.3 on suse linux for prerequisite i am getting error for required packages can anybody tell me from where to download these packages.
I dont have the DVD so i cant mount and install the rpm's .From zypper i am getting this error
expdev1:~ # zypper install libstdc++-3.4.6
Loading repository data...
Reading installed packages...
'libstdc++-3.4.6' not found.
Resolving package dependencies...
Nothing to do.
Can anybody help me in thisHi,
Yes you can install Oracle Database 11.2 to Suse Linux :
On SUSE Linux Enterprise Server 10
2.6.16.21 or later
On SUSE Linux Enterprise Server 11
2.6.27.19 or later
Package Requirements
The following or later version of packages for SUSE Linux Enterprise Server 10
must be installed:
binutils-2.16.91.0.5
compat-libstdc++-5.0.7
gcc-4.1.0
gcc-c++-4.1.2
glibc-2.4-31.63
glibc-devel-2.4-31.63
glibc-devel-32bit-2.4-31.63
ksh-93r-12.9
libaio-0.3.104
libaio-32bit-0.3.104
libaio-devel-0.3.104
libaio-devel-32bit-0.3.104
libelf-0.8.5
libgcc-4.1.2
libstdc++-4.1.2
libstdc++-devel-4.1.2
make-3.80
numactl-0.9.6.x86_64
sysstat-8.0.4
■ The following or later version of packages for SUSE Linux Enterprise Server 11
must be installed:
binutils-2.19
gcc-4.3
gcc-32bit-4.3
gcc-c++-4.3
glibc-2.9
glibc-32bit-2.9
glibc-devel-2.9
glibc-devel-32bit-2.9
ksh-93t
libaio-0.3.104
libaio-32bit-0.3.104
libaio-devel-0.3.104
libaio-devel-32bit-0.3.104
libstdc++33-3.3.3
libstdc++33-32bit-3.3.3
libstdc++43-4.3.3_20081022
libstdc++43-32bit-4.3.3_20081022
libstdc++43-devel-4.3.3_20081022
libstdc++43-devel-32bit-4.3.3_20081022
libgcc43-4.3.3_20081022
libstdc++-devel-4.3
make-3.81
sysstat-8.1.5
Why you not checked : http://docs.oracle.com/cd/E11882_01/install.112/e24326.pdf
and Please check : https://www.suse.com/LinuxPackages/packageRouter.jsp?product=server&version=11&service_pack=&architecture=ppc&package_na…
https://www.suse.com/LinuxPackages/packageRouter.jsp?product=server&version=11&service_pack=&architecture=i386&package_name=libstdc%2B%2B33
Regards
Mahir M. Quluzade -
Urgent Help on Prog. requirements on OS for Distributing Computing
Dear Sir/Maa'm,
Anyone of you can please identify the program/application requirements on the OS Unix, Linux for using Database management and also find out same for Distributed Computing?
Also can you demostrate at least 2 arithmatic features and Auto Text features of MS Word/ I will be very thankful to you.
If you don't understand my question please contact me via e-mail, I'm these details urgently.
My e-mail address: [email protected] or post reply on SDN.
Thanks and God bless you.
Waiting for your response.Double post:
http://forum.java.sun.com/thread.jspa?threadID=784930 -
Java GUI not working on my Linux box anymore :(
I was using Java 1.4.1 SDK on my RedHat 8.0 Linux for months, and when I reinstalled
my system, every time I try to run my programs which use Swing, I get the same error:
[mucky@localhost GUIVERSION]$ java WebEater.MakiEatsWeb
Exception in thread "main" java.lang.UnsatisfiedLinkError: /usr/java/j2sdk1.4.1/jre/lib/i386/libfontmanager.so: libstdc++-libc6.1-1.so.2: cannot open shared
object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1473)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1389)
at java.lang.Runtime.loadLibrary0(Runtime.java:788)
at java.lang.System.loadLibrary(System.java:832)
at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.font.NativeFontWrapper.<clinit>(NativeFontWrapper.java:42)
at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
at sun.awt.X11GraphicsEnvironment.<clinit>(X11GraphicsEnvironment.java:125)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:140)
at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:62)
at java.awt.Window.init(Window.java:223)
at java.awt.Window.<init>(Window.java:267)
at java.awt.Frame.<init>(Frame.java:398)
at javax.swing.JFrame.<init>(JFrame.java:198)
at WebEater.MakiEatsWeb.main(MakiEatsWeb.java:1950)
I was looking for this libstdc++-libc6.1-1.so.2 file but I couldn't find it.
Can someone help me with this please?This libstdc++-libc6.1-1.so.2 should be somewhere on your distributon CD's. I'm not familar with RH, so I can't tell you where you should search.
Anyway, if you won't suceed, you may search for file "libstdc++-libc6.x-x.so.2" or similar and create a soft link to it wih name of "libstdc++-libc6.1-1.so.2". This way you will cheat JVM, by telling it you have 6.1-1 installed, while your version is different.
regards,
Tomasz Sztejka -
Corrupt ? : Java and ABAP Trial Version on Linux - VMware Edition
Has anyone been successfull in downloading / running the brand new testdrive "Netweaver 7.0 - Java and ABAP Trial Version on Linux - VMware Edition" ?
I tried downloading it twice, but it appears the second file (part2.rar) is corrupt.
unpacking gives a CRC error on file 'SLES10SP1_Test_Drive(2)-s003.vmdk.
Thanks & Best regards,
Jeroen Engelen
SAP Netweaver Technology consultantHello all,
You have to follow instruction on this side>
http://www.novell.com/documentation/sles10/esd/ii_sap_testdrive_sles10sp1_vmware1.html
YOu need to download
part1 > which is soft from NOvell called
SAP Test Drive "SLES10SP1VSAP.rar"
Maybe this link help you "http://download.novell.com/index.jsp?product_id=&search=Search&families=2658&version=8161&date_range=&keywords=&sort_by=&x=14&y=7
After donwload from sdn part two
SAP NetWeaver 7.0 - Java and ABAP Trial Version on Linux - VMware Edition
from sdn Downloads.
YOu need to use VMWARE soft to start up SLES 10 (part1) and after that use SLES to start up SAP.
But here I have problem I can not login to SLES as I don't know passwrod, I was trying to found it at novell web site or SAP without any sucess.
So at this point I am stuck
Here is the same qeustion from Jim Jiang and me
what is user name and password for SLES10 SP1 SAP Version
Hope this give you overview what needs to be done, to start up Trial SAP version
Peter Nechala -
Hardening Linux for Oracle 10g
I have been working on creating a bare-bones RHEL 5 installation which will act as an Oracle 10g database server. For hardening Linux, I have restricted to a bare minimum of packages to make it more secure. This installation did not have X-Windows, Gnome/KDE and a host of other services that will not be required on Production servers. I selected only the BASE installation which was further customized to include just the following (there is scope to trim this further, so feedback is welcome):
NetworkManager
readahead
smartmontools
yum-updatesd
irqbalance
acpid
crash
cryptsetup-luks
dos2unix
dump
finger
gnugpg
ksh
libaio
logwatch
m2crypto
man-pages
mdadm
nano
numactl
openssh-clients
openssh-servers
pam_ccreds
pam_krb5
pam_passwdqc
sendmail
setuptools
stunnel
sudo
symlinks
system-config-network
tree
unix2dos
unzip
vconfig
wget
which
yum
yum-rhn-plugin
yum-security
zip
Since I do not intend to use nfs, nis, samba – associated packages were not included. Further hardening was achieved by deleting non-required services (kudzu, avahi, gpm, atd, netfs, ip6tables).
The challenge comes when I begin setting up Oracle 10g using the oracle validated rpm method. In an attempt to resolve dependencies, YUM ends up installing 70 packages that do not apparently seem to have anything to do with an RDBMS (sound libraries, Gnome, X libraries and tools etc.). For me the libraries/binaries required for linking appear to be justified but the rest appear to be installed only for the Installer.
This package addition also ends up installing gamin which provides the gam_server which has bugs in it that lead to > 90% CPU consumption.
I further tried erasing some of the packages to see if anything broke. Till now nothing is broken and the database is running fine. Till now I have removed:
gamin
gamin-python
gnome-mount
gnome-vfs2
libbonoboui
libgnome
libgnomeui
oracle-validated
yum-updatesd
esound
hicolor-icon-theme
GConf2
gnome-keyring
gtk2
libglade2
libgnomecanvas
libnotify
libwnck
notification-daemon
audiofile
cups-libs
gnome-mime-data
cairo
pango
My questions:
• How have you created a production/hardened Linux based Oracle installation?
• Can you share your experiences in hardening Linux for Oracle and deploying the Oracle 10g RDBMS without installing the scores of packages which themselves might compromise the server?
• What exactly is the dependency for the Oracle 10g RDBMS on X11, Gnome, Gamin and graphic libraries such as Cairo and Pango (to name a few)?
• Which Linux system services are really mandatory for Oracle?
• Does a non-default secure installation compromise Oracle support?
The current memory footprint for this setup (without any workload) is (figures in MB):
total used free shared buffers cached
Mem: 1010 458 552 0 19 377
-/+ buffers/cache: 61 949
Swap: 2047 0 2047
…of this 290 MB belongs to Oracle ☺
I will be working with the other route – without using the oracle-validated rpm.
Please let me have your feedback.
BR
AniruddhaHi,
I'll paste the rpm -qa of a RHEL5 server I have installed through rpm -ivh (not yum at all)
aspell-0.60.3-7.1
aspell-en-6.0-2.1
aspell-es-0.50-13.2.2
at-3.1.8-82.fc6
atk-1.12.2-1.fc6
audit-libs-1.7.13-2.el5
audit-libs-1.7.13-2.el5
audit-libs-python-1.7.13-2.el5
authconfig-5.3.21-6.el5
avahi-0.6.16-6.el5
avahi-compat-libdns_sd-0.6.16-6.el5
basesystem-8.0-5.1.1
bash-3.2-24.el5
bc-1.06-21
binutils-2.17.50.0.6-12.el5
bitmap-fonts-0.3-5.1.1
bitstream-vera-fonts-1.10-7
bzip2-1.0.3-4.el5_2
bzip2-libs-1.0.3-4.el5_2
cairo-1.2.4-5.el5
checkpolicy-1.33.1-4.el5
chkconfig-1.3.30.1-2
compat-libstdc++-33-3.2.3-61
compat-libstdc++-33-3.2.3-61
coreutils-5.97-23.el5
cpio-2.6-23.el5
cpp-4.1.2-46.el5
cracklib-2.8.9-3.3
cracklib-dicts-2.8.9-3.3
crontabs-1.10-8
cryptsetup-luks-1.0.3-5.el5
cups-1.3.7-11.el5
cups-libs-1.3.7-11.el5
cyrus-sasl-2.1.22-5.el5
cyrus-sasl-lib-2.1.22-5.el5
db4-4.3.29-10.el5
db4-4.3.29-10.el5
dbus-1.1.2-12.el5
dbus-glib-0.73-8.el5
dbus-libs-1.1.2-12.el5
dbus-python-0.70-7.el5
Deployment_Guide-en-US-5.2-11
Deployment_Guide-es-ES-5.2-11
desktop-file-utils-0.10-7
device-mapper-1.02.32-1.el5
device-mapper-1.02.32-1.el5
device-mapper-event-1.02.32-1.el5
device-mapper-multipath-0.4.7-30.el5
diffutils-2.8.1-15.2.3.el5
dmidecode-2.9-1.el5
dmraid-1.0.0.rc13-53.el5
dmraid-events-1.0.0.rc13-53.el5
e2fsprogs-1.39-23.el5
e2fsprogs-devel-1.39-23.el5
e2fsprogs-devel-1.39-23.el5
e2fsprogs-libs-1.39-23.el5
e2fsprogs-libs-1.39-23.el5
ed-0.2-39.el5_2
eject-2.1.5-4.2.el5
elfutils-0.137-3.el5
elfutils-libelf-0.137-3.el5
elfutils-libelf-devel-0.137-3.el5
elfutils-libelf-devel-static-0.137-3.el5
elfutils-libs-0.137-3.el5
ethtool-6-3.el5
expat-1.95.8-8.2.1
file-4.17-15.el5_3.1
filesystem-2.4.0-2
findutils-4.2.27-6.el5
fipscheck-1.2.0-1.el5
fipscheck-lib-1.2.0-1.el5
fontconfig-2.4.1-7.el5
freetype-2.2.1-21.el5_3
freetype-2.2.1-21.el5_3
gawk-3.1.5-14.el5
gcc-4.1.2-46.el5
gcc-c++-4.1.2-46.el5
gdbm-1.8.0-26.2.1
gettext-0.14.6-4.el5
glib2-2.12.3-4.el5_3.1
glib2-2.12.3-4.el5_3.1
glib2-devel-2.12.3-4.el5_3.1
glib2-devel-2.12.3-4.el5_3.1
glibc-2.5-42
glibc-2.5-42
glibc-common-2.5-42
glibc-devel-2.5-42
glibc-devel-2.5-42
glibc-headers-2.5-42
gnutls-1.4.1-3.el5_2.1
grep-2.5.1-55.el5
groff-1.18.1.1-11.1
grub-0.97-13.5
gtk2-2.10.4-20.el5
gzip-1.3.5-10.el5
hal-0.5.8.1-52.el5
hdparm-6.6-2
hesiod-3.1.0-8
hicolor-icon-theme-0.9-2.1
hmaccalc-0.9.6-1.el5
htmlview-4.0.0-2.el5
hwdata-0.213.16-1.el5
info-4.8-14.el5
initscripts-8.45.30-2.el5
iproute-2.6.18-10.el5
iptables-1.3.5-5.3.el5
iptables-ipv6-1.3.5-5.3.el5
iputils-20020927-46.el5
kbd-1.12-21.el5
kernel-2.6.18-164.el5
kernel-headers-2.6.18-164.el5
keyutils-libs-1.2-1.el5
kpartx-0.4.7-30.el5
krb5-libs-1.6.1-36.el5
ksh-20080202-2.el5
kudzu-1.2.57.1.21-1
less-394-6.el5
libacl-2.2.39-3.el5
libaio-0.3.106-3.2
libaio-0.3.106-3.2
libaio-devel-0.3.106-3.2
libattr-2.4.32-1.1
libcap-1.10-26
libdaemon-0.10-5.el5
libdmx-1.0.2-3.1
libdrm-2.0.2-1.1
libgcc-4.1.2-46.el5
libgcc-4.1.2-46.el5
libgcrypt-1.4.4-5.el5
libgomp-4.4.0-6.el5
libgomp-4.4.0-6.el5
libgpg-error-1.4-2
libhugetlbfs-1.3-3.el5
libhugetlbfs-1.3-3.el5
libICE-1.0.1-2.1
libICE-1.0.1-2.1
libjpeg-6b-37
libpng-1.2.10-7.1.el5_3.2
libselinux-1.33.4-5.5.el5
libselinux-1.33.4-5.5.el5
libselinux-python-1.33.4-5.5.el5
libselinux-utils-1.33.4-5.5.el5
libsemanage-1.9.1-4.4.el5
libsepol-1.15.2-2.el5
libsepol-1.15.2-2.el5
libSM-1.0.1-3.1
libSM-1.0.1-3.1
libstdc++-4.1.2-46.el5
libstdc++-4.1.2-46.el5
libstdc++-devel-4.1.2-46.el5
libstdc++-devel-4.1.2-46.el5
libsysfs-2.0.0-6
libtermcap-2.0.8-46.1
libtermcap-2.0.8-46.1
libtiff-3.8.2-7.el5_3.4
libusb-0.1.12-5.1
libuser-0.54.7-2.el5.5
libvolume_id-095-14.21.el5
libvolume_id-095-14.21.el5
libX11-1.0.3-11.el5
libX11-1.0.3-11.el5
libXau-1.0.1-3.1
libXau-1.0.1-3.1
libXau-devel-1.0.1-3.1
libXaw-1.0.2-8.1
libXcursor-1.1.7-1.1
libXdmcp-1.0.1-2.1
libXdmcp-1.0.1-2.1
libXext-1.0.1-2.1
libXext-1.0.1-2.1
libXfixes-4.0.1-2.1
libXft-2.1.10-1.1
libXi-1.0.1-3.1
libXinerama-1.0.1-2.1
libxml2-2.6.26-2.1.2.8
libxml2-python-2.6.26-2.1.2.8
libXmu-1.0.2-5
libXp-1.0.0-8.1.el5
libXp-1.0.0-8.1.el5
libXp-devel-1.0.0-8.1.el5
libXpm-3.5.5-3
libXrandr-1.1.1-3.1
libXrender-0.9.1-3.1
libXt-1.0.2-3.1.fc6
libXt-1.0.2-3.1.fc6
libXtst-1.0.1-3.1
libXtst-1.0.1-3.1
libXv-1.0.1-4.1
libXxf86dga-1.0.1-3.1
libXxf86misc-1.0.1-3.1
libXxf86vm-1.0.1-3.1
lm_sensors-2.10.7-4.el5
logrotate-3.7.4-9
lsscsi-0.17-3.el5
lvm2-2.02.46-8.el5
m4-1.4.5-3.el5.1
mailx-8.1.1-44.2.2
make-3.81-3.el5
MAKEDEV-3.23-1.2
man-1.6d-1.1
man-pages-es-1.28-10.1.1
mcstrans-0.2.11-3.el5
mesa-libGL-6.5.1-7.7.el5
microcode_ctl-1.17-1.48.el5
mingetty-1.07-5.2.2
mkinitrd-5.1.19.6-54
mkinitrd-5.1.19.6-54
mktemp-1.5-23.2.2
module-init-tools-3.3-0.pre3.1.54.el5
nano-1.3.12-1.1
nash-5.1.19.6-54
ncurses-5.5-24.20060715
net-tools-1.60-78.el5
newt-0.52.2-12.el5
nspr-4.7.4-1.el5_3.1
nspr-4.7.4-1.el5_3.1
nss-3.12.3.99.3-1.el5_3.2
nss-3.12.3.99.3-1.el5_3.2
ntp-4.2.2p1-9.el5_3.2
ocfs2-2.6.18-164.el5-1.4.2-1.el5
ocfs2console-1.4.2-1.el5
ocfs2-tools-1.4.2-1.el5
ocfs2-tools-devel-1.4.2-1.el5
openldap-2.3.43-3.el5
openssh-4.3p2-36.el5
openssh-clients-4.3p2-36.el5
openssh-server-4.3p2-36.el5
openssl-0.9.8e-12.el5
oracleasm-2.6.18-164.el5-2.0.5-1.el5
oracleasmlib-2.0.4-1.el5
oracleasm-support-2.1.3-1.el5
pam-0.99.6.2-6.el5
pango-1.14.9-6.el5
paps-0.6.6-18.el5
passwd-0.73-1
patch-2.5.4-29.2.3.el5
pax-3.4-1.2.2
pciutils-2.2.3-7.el5
pcre-6.6-2.el5_1.7
perl-5.8.8-27.el5
pkgconfig-0.21-2.el5
pm-utils-0.99.3-10.el5
policycoreutils-1.33.12-14.6.el5
popt-1.10.2.3-18.el5
prelink-0.4.0-2.el5
procmail-3.22-17.1
procps-3.2.7-11.1.el5
psmisc-22.2-7
pycairo-1.2.0-1.1
pygobject2-2.12.1-5.el5
pygtk2-2.10.1-12.el5
python-2.4.3-27.el5
python-numeric-23.7-2.2.2
readline-5.1-3.el5
readline-5.1-3.el5
redhat-logos-4.9.16-1
redhat-lsb-3.1-12.3.EL
redhat-menus-6.7.8-3.el5
redhat-release-5Server-5.4.0.3
redhat-release-notes-5Server-29
rhpl-0.194.1-1
rootfiles-8.1-1.1.1
rpm-4.4.2.3-18.el5
rpm-libs-4.4.2.3-18.el5
rsh-0.17-38.el5
rsync-2.6.8-3.1
sed-4.1.5-5.fc6
selinux-policy-2.4.6-255.el5
selinux-policy-targeted-2.4.6-255.el5
sendmail-8.13.8-2.el5
setools-3.0-3.el5
setserial-2.17-19.2.2
setup-2.5.58-7.el5
sgpio-1.2.0_10-2.el5
shadow-utils-4.0.17-14.el5
slang-2.0.6-4.el5
smartmontools-5.38-2.el5
sqlite-3.3.6-5
sysfsutils-2.0.0-6
sysklogd-1.4.1-44.el5
sysstat-7.0.2-3.el5
system-config-securitylevel-tui-1.6.29.1-2.1.el5
SysVinit-2.86-15.el5
tar-1.15.1-23.0.1.el5
tcl-8.4.13-4.el5
tcl-8.4.13-4.el5
tcp_wrappers-7.6-40.7.el5
tcp_wrappers-7.6-40.7.el5
telnet-0.17-39.el5
termcap-5.5-1.20060701.1
time-1.7-27.2.2
tmpwatch-2.9.7-1.1.el5.2
tzdata-2009k-1.el5
udev-095-14.21.el5
udftools-1.0.0b3-0.1.el5
unzip-5.52-3.el5
usermode-1.88-3.el5.2
util-linux-2.13-0.52.el5
vim-common-7.0.109-6.el5
vim-minimal-7.0.109-6.el5
vixie-cron-4.1-76.el5
vte-0.14.0-2.el5
which-2.16-7
wireless-tools-28-2.el5
xorg-x11-filesystem-7.1-2.fc6
xorg-x11-utils-7.1-2.fc6
xorg-x11-xauth-1.0.1-2.1
zabbix-agent-1.4.6-1.el5
zip-2.31-2.el5
zlib-1.2.3-3
Hope to help,
Mario Alcaide -
Revision: 24018
Revision: 24018
Author: [email protected]
Date: 2012-07-11 02:23:31 -0700 (Wed, 11 Jul 2012)
Log Message:
Updates to the message to send across only required message attributes for small message format
Modified Paths:
blazeds/trunk/modules/core/src/flex/messaging/messages/AbstractMessage.java
blazeds/trunk/modules/core/src/flex/messaging/messages/AsyncMessage.java
blazeds/trunk/modules/core/src/flex/messaging/messages/CommandMessage.java
blazeds/trunk/modules/core/src/flex/messaging/messages/ErrorMessage.java
blazeds/trunk/modules/core/src/flex/messaging/messages/Message.java
blazeds/trunk/modules/core/src/flex/messaging/messages/RemotingMessage.javaIm not sure what's the problem, but let's try to figure it out. First of all explain what do you mean by "it works very bad". Doest it hang, is it slow, is quality unacceptable.
Myself, I have one problem with JMF. When i run video & audio on my Centrino 1.4 GHz, it just takes 100% CPU! And of course quality becomes degraded. Check if you have something like this. -
Start Java application at system start up linux/unix
Hi,
I am working on a application, which needs to run as a background process in linux/unix without the intervention of the user.
Please give me the details procedure how to make it as background process.
thanksyou can make any process a background process by adding an amperstand
for example:
java -cp $MyClassPath myAppClass &
If you want to run it automatically at startup
you'll have to write a little script which is executed at startup
and contains a line as above.
The scripts exectuted at startup are usually located at
/etc/init.d
You can use one of those scripts as starting point for your own script. -
How to run java GUI application on embedded ARM linux board
Hi friends,
This is suresh. I am Embedded developer .Right now i am using Embedded linux board biased by TI OMAP IC (arm7) .This is working fine.Actually we created one jar application .It is working good in GPOS.But when i was running that jar file in my embedded board. i got some errors. Last two weeks i was searching on the net.But still didn't get proper output.Right now i having "java 1.7.0_60" with headful support package for arm7. Here i have attached my error screen shot.ThanksUsing the package manger in your Linux distribution, try installing libX11 package. We had a similar issue using Java SE 8 embedded on arch Linux as with some distros you are starting from the bare basics and need to add in missing dependencies.
-
Hello guys, this is my first post here :) so don't bash me too much.
Trying to get the Java EE installed on gentoo linux x86-64 here. Downloaded java_ee_sdk-6u1-jdk-linux-x64.sh from oracle.com.
I have tried different jres:
32 bit, 64 bit.
now I have this jre :
ak@pussy ~/0.java $ java -version
java version "1.6.0_20"
Java(TM) SE Runtime Environment (build 1.6.0_20-b02)
Java HotSpot(TM) 64-Bit Server VM (build 16.3-b01, mixed mode)so, doing ak@pussy ~/0.java $ ./java_ee_sdk-6u1-jdk-linux-x64.sh gives me nasty file not found exception & hence I can't get sdk installed:
[#|2010-08-04T20:32:13.704+06:00|INFO|Install Engine|org.openinstaller.provider.task.TaskDriver|arg0=prod\=glassfish|OP_UNCONFIGURE:Unconfiguring product|#]
[#|2010-08-04T20:32:13.781+06:00|INFO|Install Engine|org.openinstaller.provider.conf.ConfiguratorFactory|arg0=class org.openinstaller.provider.conf.InstallationConfigurator|LOG_INFO:Info|#]
[#|2010-08-04T20:32:14.210+06:00|INFO|Install Engine|org.openinstaller.provider.conf.InstallationConfigurator||Unconfiguring GlassFish:\[Unconfiguring GlassFish\]*\[{0} {1}\]|#]
[#|2010-08-04T20:32:14.232+06:00|INFO|Install Engine|org.openinstaller.provider.task.TaskDriver|arg0=prod\=jdk|OP_UNCONFIGURE:Unconfiguring product|#]
[#|2010-08-04T20:32:14.264+06:00|INFO|Install Engine|org.openinstaller.provider.conf.InstallationConfigurator||Unconfiguring JDK:\[Unconfiguring JDK\]*\[{0} {1}\]|#]
[#|2010-08-04T20:32:14.289+06:00|INFO|Install Engine|org.openinstaller.provider.task.TaskDriver|arg0=prod\=updatetool|OP_UNCONFIGURE:Unconfiguring product|#]
[#|2010-08-04T20:32:14.318+06:00|INFO|Install Engine|org.openinstaller.provider.conf.InstallationConfigurator||Unconfiguring Updatetool:\[Unconfiguring Updatetool\]*\[{0} {1}\]|#]
[#|2010-08-04T20:32:14.319+06:00|INFO|Install Engine|org.openinstaller.provider.conf.InstallationConfigurator||Installation directory: /home/ak/0.java/glassfishv3:\[Installation directory: /home/ak/0.java/glassfishv3\]*\[{0} {1}\]|#]
[#|2010-08-04T20:32:14.322+06:00|INFO|Install Engine|org.openinstaller.provider.conf.InstallationConfigurator||Shutting down notifier process:\[Shutting down notifier process\]*\[{0} {1}\]|#]
[#|2010-08-04T20:32:14.353+06:00|INFO|Install Engine|org.openinstaller.provider.conf.InstallationConfigurator||Exception while unregistering notifier: Exception=EXECUTECMD_ERR
at org.openinstaller.util.ExecuteCommand.execute(ExecuteCommand.java:467)
at org.openinstaller.provider.conf.InstallationConfigurator.unconfigureUpdatetool(null:?)
at org.openinstaller.provider.conf.InstallationConfigurator.unConfigure(null:?)
at org.openinstaller.provider.conf.ConfigProvider.receiveRequest(ConfigProvider.java:573)
at org.openinstaller.bus.ControlBus.publishRequest(ControlBus.java:341)
at org.openinstaller.provider.task.UnconfigTask.perform(UnconfigTask.java:88)
at org.openinstaller.provider.task.TaskDriver.executeTask(TaskDriver.java:378)
at org.openinstaller.provider.task.TaskProvider.receiveRequest(TaskProvider.java:117)
at org.openinstaller.bus.ControlBus$3.run(ControlBus.java:404)
at java.lang.Thread.run(Thread.java:619)
Caused By=java.io.IOException: Cannot run program "/home/ak/0.java/glassfishv3/updatetool/bin/updatetool": java.io.IOException: error=2, No such file or directory
at java.lang.ProcessBuilder.start(ProcessBuilder.java:460)
at java.lang.Runtime.exec(Runtime.java:593)
at java.lang.Runtime.exec(Runtime.java:509)
at org.openinstaller.util.ExecuteCommand.execute(ExecuteCommand.java:423)
at org.openinstaller.provider.conf.InstallationConfigurator.unconfigureUpdatetool(null:?)
at org.openinstaller.provider.conf.InstallationConfigurator.unConfigure(null:?)
at org.openinstaller.provider.conf.ConfigProvider.receiveRequest(ConfigProvider.java:573)
at org.openinstaller.bus.ControlBus.publishRequest(ControlBus.java:341)
at org.openinstaller.provider.task.UnconfigTask.perform(UnconfigTask.java:88)
at org.openinstaller.provider.task.TaskDriver.executeTask(TaskDriver.java:378)
at org.openinstaller.provider.task.TaskProvider.receiveRequest(TaskProvider.java:117)
at org.openinstaller.bus.ControlBus$3.run(ControlBus.java:404)
at java.lang.Thread.run(Thread.java:619)
Context-Items=[[method=org.openinstaller.util.ExecuteCommand.execute(), operation=EXECUTECMD_ERR, command=[/home/ak/0.java/glassfishv3/updatetool/bin/updatetool, --notifier, --shutdown]]]:\[Exception while unregistering notifier: Exception=EXECUTECMD_ERR
at org.openinstaller.util.ExecuteCommand.execute(ExecuteCommand.java:467)
at org.openinstaller.provider.conf.InstallationConfigurator.unconfigureUpdatetool(null:?)
at org.openinstaller.provider.conf.InstallationConfigurator.unConfigure(null:?)
at org.openinstaller.provider.conf.ConfigProvider.receiveRequest(ConfigProvider.java:573)
at org.openinstaller.bus.ControlBus.publishRequest(ControlBus.java:341)
at org.openinstaller.provider.task.UnconfigTask.perform(UnconfigTask.java:88)
at org.openinstaller.provider.task.TaskDriver.executeTask(TaskDriver.java:378)
at org.openinstaller.provider.task.TaskProvider.receiveRequest(TaskProvider.java:117)
at org.openinstaller.bus.ControlBus$3.run(ControlBus.java:404)
at java.lang.Thread.run(Thread.java:619)
Caused By=java.io.IOException: Cannot run program "/home/ak/0.java/glassfishv3/updatetool/bin/updatetool": java.io.IOException: error=2, No such file or directory
.and so onI guess this should give more details about issues I am having :
Using the user defined JAVA_HOME : /home/ak/0.java/jre1.6.0_21_64
Entering setup...
WARNING: Warning: Could not detect OS Architecture, falling back to os.arch [Architecture=GenuineIntel ]
FINE: completed initializing provider svc://general/orchestrator
FINEST: Ignoring blank answer file or syntax error in ,file:///tmp/install.080510113914/install.properties
FINEST: BGImagePanel() called by org.openinstaller.util.ui.StandaloneSplash?<init>
FINEST: BGImagePanel.setBgImage(Image BufferedImage@1c5d9084: type = 5 ColorModel: #pixelBits = 24 numComponents = 3 color space = java.awt.color.ICC_ColorSpace@42bad8a8 transparency = 1 has alpha = false isAlphaPre = false ByteInterleavedRaster: width = 728 height = 435 #numDataElements 3 dataOff[0] = 2) called by org.openinstaller.util.ui.StandaloneSplash?<init>
FINE: DISCOVERING_SERVICE_PROVIDERS
FINE: Not instantiating null - not a ServiceProvider
Exception=null
at java.net.URLClassLoader$1.run(null:?)
at java.security.AccessController.doPrivileged(null:?)
at java.net.URLClassLoader.findClass(null:?)
at org.openinstaller.core.EngineBootstrap.findClass(EngineBootstrap.java:249)
at java.lang.ClassLoader.loadClass(null:?)
at org.openinstaller.core.EngineBootstrap.loadClass(EngineBootstrap.java:357)
at java.lang.ClassLoader.loadClass(null:?)
at org.openinstaller.core.EngineBootstrap.loadClass(EngineBootstrap.java:318)
at java.lang.Class.forName0(null:?)
at java.lang.Class.forName(null:?)
at org.openinstaller.core.Orchestrator.findServiceProviders(Orchestrator.java:763)
at org.openinstaller.core.Orchestrator.main(Orchestrator.java:447)
at sun.reflect.NativeMethodAccessorImpl.invoke0(null:?)
at sun.reflect.NativeMethodAccessorImpl.invoke(null:?)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(null:?)
at java.lang.reflect.Method.invoke(null:?)
at org.openinstaller.core.EngineBootstrap.main(EngineBootstrap.java:208)
FINE: FOUND_SERVICE_PROVIDER
FINE: FOUND_SERVICE_PROVIDER
FINE: FOUND_SERVICE_PROVIDER
FINE: FOUND_SERVICE_PROVIDER
FINE: FOUND_SERVICE_PROVIDER
FINE: FOUND_SERVICE_PROVIDER
FINE: FOUND_SERVICE_PROVIDER
FINE: FOUND_SERVICE_PROVIDER
FINE: FOUND_SERVICE_PROVIDER
FINE: FOUND_SERVICE_PROVIDER
FINE: DISCOVERED_SERVICE_PROVIDERS
FINE: completed initializing provider svc://general/system
FINE: completed initializing provider svc://general/name
FINE: completed initializing provider svc://general/product
FINEST: Initializing configuration provider
FINEST: BusRequest For: [svc://general/EngineConfig] Request: [BusRequest: name: ConfigRequest data: EngineConfigCommand{ cmd=GET_CONFIG, data=MEDIA_LOCATION}] By: [org.openinstaller.util.install.Common.getMediaLocationURL(*)
FINEST: BusRequest For: [svc://general/EngineConfig] Request: [BusRequest: name: ConfigRequest data: EngineConfigCommand{ cmd=GET_CONFIG, data=MEDIA_LOCATION}] By: [org.openinstaller.util.install.Common.getMediaLocationURL(*)
FINEST: BusRequest For: [svc://general/EngineConfig] Request: [BusRequest: name: ConfigRequest data: EngineConfigCommand{ cmd=GET_CONFIG, data=MEDIA_LOCATION}] By: [org.openinstaller.util.install.Common.getMediaLocationURL(*)
FINE: completed initializing provider svc://general/task
FINEST: BusRequest For: [svc://general/EngineConfig] Request: [BusRequest: name: Mode-Request data: EngineConfigCommand{ cmd=GET_CONFIG, data=DRY_RUN_FILE}] By: [org.openinstaller.provider.sims.SIMSProvider.init(*)
FINEST: BusRequest For: [svc://general/EngineConfig] Request: [BusRequest: name: EngineConfigRequest data: EngineConfigCommand{ cmd=GET_CONFIG, data=PLATFORM_PLUGIN_PATH}] By: [org.openinstaller.provider.platform.SystemInterface.init(*)
FINE: completed initializing provider svc://general/operation
FINEST: BusRequest For: [svc://general/EngineConfig] Request: [BusRequest: name: ModeRequest data: EngineConfigCommand{ cmd=GET_CONFIG, data=PKG_FORMAT}] By: [org.openinstaller.sims.BackendFactory.discoverBackend(*)
FINE: LOADING_CLASS
FINE: Can't load SIMS backend org.openinstaller.sims.backends.zip.unix.linux.SIMSBackend
Exception=org.openinstaller.sims.backends.zip.unix.linux.SIMSBackend
at java.net.URLClassLoader$1.run(null:?)
at java.security.AccessController.doPrivileged(null:?)
at java.net.URLClassLoader.findClass(null:?)
at org.openinstaller.core.EngineBootstrap.findClass(EngineBootstrap.java:249)
at java.lang.ClassLoader.loadClass(null:?)
at org.openinstaller.core.EngineBootstrap.loadClass(EngineBootstrap.java:357)
at java.lang.ClassLoader.loadClass(null:?)
at org.openinstaller.core.EngineBootstrap.loadClass(EngineBootstrap.java:318)
at java.lang.Class.forName0(null:?)
at java.lang.Class.forName(null:?)
at org.openinstaller.sims.BackendFactory.getBackendByClass(BackendFactory.java:146)
at org.openinstaller.sims.BackendFactory.discoverBackend(BackendFactory.java:112)
at org.openinstaller.sims.BackendFactory.getBackend(BackendFactory.java:80)
at org.openinstaller.sims.SIMSContext.<init>(SIMSContext.java:131)
at org.openinstaller.provider.sims.SIMSProvider.init(SIMSProvider.java:95)
at org.openinstaller.bus.ControlBus$1.run(ControlBus.java:192)
at java.lang.Thread.run(null:?)
] -
I use to login to linux server by Xmanager by windows machine which requires a username and password, when i changed the password recently OWB started showing a error when exiting OWB client open on server throuh XMANAGER, It is asking for a permission on a particular folder..............can anybody tell me which folder requires the permission to run OWB client on server???
This is probably complaining about either the preference properties files or some other user preference files in owb/bin/admin
Cheers
David -
Java Persistence 1.0 requires Java 5.0 or newer.
Hello All,
I'm getting the below error on NWDS CE 7.1 SP09 while trying to do the [tutorial, page 35|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b030e7fb-2662-2b10-0dab-c4aa52c3550b]. I found a forum [posting|Problems adding Java Persistence as a Project Facet;, where the issue got resolved after restarting the laptop. I'm unable to get past this error even after bouncing the machine.
I'm using Java version: JDK1.5.0_06 and have also tried with 1.5.0_22
Java Persistence 1.0 requires Java 5.0 or newer.
Constraints for Java Persistence 1.0 have not been met.
Please help!
Regards,
TNHello there,
Can I ask you, Did you try closing and opening the NWDS again. Also try to clean and build the project again.
HTH
Vivek Nidhi -
Where can I find the latest version of agent for linux for download?
I have trouble when I try to install an agent in Linux for opscenter, I get this message: status bad interpreter, I check manually the script and I found that many internal scripts are written for Solaris in the last version release 2 PSU1. Can everybody help me?
Hi Michele V,
Yes I run the OCDoctor and output was:
./OCDoctor.sh --agent-prereq
Ops Center Doctor 4.33 [Linux]
========== Checking 12c Agent Controller Requirements ... ====================
ERROR: gettext is not installed.
./prereq/agent_prereq_all.sh: line 57: gettext: command not found
./prereq/agent_prereq_all.sh: line 57: gettext: command not found
./prereq/agent_prereq_all.sh: line 57: gettext: command not found
./prereq/agent_prereq_all.sh: line 57: gettext: command not found
ERROR: 32-bit version of libxml2 is not installed.
./prereq/agent_prereq_all.sh: line 57: gettext: command not found
./prereq/agent_prereq_all.sh: line 57: gettext: command not found
./prereq/agent_prereq_all.sh: line 57: gettext: command not found
./prereq/agent_prereq_all.sh: line 57: gettext: command not found
OK: Servicetag is not installed (sun-servicetag)
OK: No old agent / conflicting packages were found
OK: No old agent processes are running
OK: LD_LIBRARY_PATH is not set
OK: Checked for ssh requirements
./prereq/agent_prereq_all.sh: line 57: gettext: command not found
You have mail in /var/spool/mail/root
I appreciate yoiuyr help
Maybe you are looking for
-
A generic error occurred in GDI+ while assing tiff image file to Bitmap and Image
Hi, I am getting "A generic error occurred in GDI+" error while reading the tiff image file to Bitmap or Image. Below is my sample code. string filePath=@"c:\Images\sample.tif"; Bitmap bmp=new Bitmap(filePath); // here getting exception int totalpa
-
Hi, I want to call a report from Form 6i at run time. And I write the following code in When Buttton Press trigger . when I press the button it will gives no response. declare x report_object; y varchar2(100); begin x:=find_report_obje
-
Itunes not starting on computer
I have installed and uninstalled iTunes on my PC numerous times but it will not open. I have removed the hidden .sicd files and it still won't begin. I have Windows XP and Google Chrome. Getting very frustrated, please help in lay man's terms for
-
BPM Suite 11.1.1.5 Feature Pack - Instance Migration
Hi, In BPM Suite 11.1.1.5 Feature Pack, Instance Migration was introduced. A very nice and essential feature. I'd like to investegate the behaviour of this feature. However I can't find any documentation about it. Also not in the new documentation. A
-
Is there an Oracle Identity Management (OIM) 11g certification?
I wasn't able to find any Identity and Access Management (OIM 11g) certification. Is there any?