Java Class not found when starting applet with ip address

Hi @all,
we use Application Server 10gR2 with Java 1.6.0_20 and we start the applet with an JNLP File.
When I use the url http://lhhap03/forms/java the applet starts as it should. But when I change the entry to http://192.168.17.208/forms/java i get the error:
Exception in thread "thread applet-oracle.forms.engine.Main-1" java.lang.NoClassDefFoundError: org/apache/regexp/RE
Now I´m a little bit confused why i can´t use the ip address instead of the dns name from the server?
Which config I have to change that i can get the access to jar libraries with the Ip - Address
Best regards
thomas

Problem Solved, I put many environment variables in the .bash_profile file, the CLASS_PATH will overwrite the weblogic server's classpath during startup.
Remove them and restart server solved my problem.

Similar Messages

"Java Class not found in classpath" Error in DESIGNER

Hello All,
I'm trying to connect in Designer using a JDBC connection to MS SQL Server 2008. As per the instructions, I updated my jdbc.sbo file with the path to the existing two JAR files. However, I still get the following error when I try and connect in Designer: "Java Class not found in classpath : C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\dataAccess\connectionServer\jdbc\Drivers\sqlsrv". Of course, this error includes the drive path with the location to my JAR files. Any help in resolving this nagging issue is very GREATLY appreciated. Also, if anyone needs it I can post a copy of the jdbc.sbo file to this thread.
Thank you,
Pankaj

Stratos,
Your suggestion didn't help. I tried to connect after restarting my machine and I still get the error. And, I've also tried adding a connection to MS SQL Server 2005 using this JDBC driver, and that didn't help either. Any other suggestions? Would it help to see my "jdbc.sbo" file? Thanks again for your and everyone else's help, and I look forward to your reply.
Regards,
Pankaj

IAS: Java Classes not found Error

Hello,
[oracle@Linux2005 bin]$ ORACLE_HOME=$ORACLE_HOME5
[oracle@Linux2005 bin]$ ./rwserver.sh server=RepSRV batch=yes
[oracle@Linux2005 bin]$ ./rwserver server=RepSRV
REP-0133: Java Classes not found
====
1) Getting a REP-0133: Java Classes not found ?
2) How can I resolve this issue ?
PT

Try post your problem to "Application server" forum.
Oracle Application Server - General

Class not found...applet

Hi all,
I am trying to load applet from remote machine, the applet giving the Class not found even though the is proper path setting. It also giving the error..
open http connection failed...
Wating for reply.
Sandeep Kutwal.

Hi,
First of all thanks to you for replying for my request.
I had tried the option given by u but it will not work at all on remote server ,it work without any error on my local tomcat (Linux Server) .
But sometimes it displays on remote server,showing random behaviour of showing, not showing. Is there any Security permission issue ? .
I am using winXP,JRE version 1.5.0_06 Java HotSpot(TM) Client VM.
It is giving error when i upload it to my remote server also path is correct .
Please reply me for this dought . The remote applet shows following errors on the applet java console .
basic: Stopping applet ...
basic: Removed progress listener: sun.plugin.util.GrayBoxPainter@15aee9
basic: Finding information ...
basic: Releasing classloader: sun.plugin.ClassLoaderInfo@ca8327, refcount=0
basic: Caching classloader: sun.plugin.ClassLoaderInfo@ca8327
basic: Current classloader cache size: 1
basic: Done ...
basic: Joining applet thread ...
basic: Destroying applet ...
basic: Disposing applet ...
basic: Quiting applet ...
basic: Joined applet thread ...
basic: Unregistered modality listener
basic: Registered modality listener
basic: Referencing classloader: sun.plugin.ClassLoaderInfo@ca8327, refcount=1
basic: Added progress listener: sun.plugin.util.GrayBoxPainter@1103a97
basic: Loading applet ...
basic: Initializing applet ...
basic: Starting applet ...
network: Connecting h/NewsApplet.class with proxy=DIRECT
basic: WARNING: error reading http:cache.
network: Connecting with proxy=DIRECT
network: Connecting .....proxy=DIRECT
load: class NewsApplet.class not found.
java.lang.ClassNotFoundException: NewsApplet.class
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 10 more
basic: Exception: java.lang.ClassNotFoundException:
Message was edited by:
SandeepKutwal
Message was edited by:
SandeepKutwal

Class not found error for applet.

This is probally a really simple mistake but I've tried everything and can't find it.
My applet works fine with applet viewer - I'm running it from JBuilder. But when I open my html file in the browser it gives me a 'Class not found' error. I've tried running other applets (my own and demos on this site) and they work fine.This is the applet tag code:
<applet code = "Rotary.class" width = "650" height = "580" align = "top">

<param name = "sector0" value ="234,215,244,207,154,43,125,63">
</applet>
The class file is in the same directory as the HTML file. Do I need to specify the codebase? I tried that too - giving it the full pathname of the class.
In the Java console it said that it couldn't find "C:Project\Rotary\javax\swing\japplet"
I don't think it could have anything to do with the fact that I'm using swing because the other applets I used used swing.
Please help - I'm really running out of ideas here!

You have a similar problem like I had.
You seem to have a too old JAVA environment for the browser - I had a too new environment.
For all who are experiencing the same problem!
Problem:
You're compiling your applets with a quiet modern compiler (i.e. Netbeans Version 3.5.1)
You are able to compile your applets without any problems but if you try your applets in "real life", the browsers can't interpret your applets [class not found]. (I tested Internet Explorer 6.0 and Netscape Navigator 4.7)
So you need a plugin for the new JAVA environment because the JAVA environment of the browser is older than that which the applet needs.
Well, you have the choice to demand to every user of your applet to download the new Java Runtime Environment, but then don't wonder why nobody visits your site!
But, don't worry: I figuered out another solution, that Netbeans (www.netbeans.org) allows to compile in different JAVA versions.
Solution:
What you have to do is:
- Install a previous version of JDK (i.e. JDK 1.3 - I would suggest, lower versions don't work with Netbeans 3.5.1 and JDK 1.3 is enough for IE 6.0 and NN 4.7, which I tested)
- Go into the "bin"-directory of Netbeans (i.e. c:/netbeans3.5.1/bin)
- Open the file "ide.cfg" (with notepad or any other texteditor)
- You see a line like: jdkhome "C:\java\j2sdk1.4.2" -J-Xmx96m -J-Xss1024k -J-Xms24m -J-Xverify:none
- Change the path to your other JDK you wish, like: jdkhome "C:\java\jdk1.3" -J-Xmx96m -J-Xss1024k -J-Xms24m -J-Xverify:none
- That's it, you can compile your applets in a previous version of JAVA so that "older" browser user don't have to install a plugin for the new JAVA environment.
Have fun!
If you have any questions I would be pleased to help you.
If this tip helped you already I would be pleased if you would send me a quick email with your experience.
My email: [email protected]

Class not found in signed applet

Hello
I am using a signed applet and am getting a class not found exception
this works fine when i run it in the IDE but get the exception when i try to load the applet from the web browser in the application.
java.lang.ClassNotFoundException: MyApplet
at sun.applet.AppletClassLoader.findClass(AppletClassLoader.java:162)
at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
at sun.applet.AppletClassLoader.loadClass(AppletClassLoader.java:123)
at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
at sun.applet.AppletClassLoader.loadCode(AppletClassLoader.java:566)
at sun.applet.AppletPanel.createApplet(AppletPanel.java:619)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(AppletPanel.java:548)
at sun.applet.AppletPanel.run(AppletPanel.java:299)
at java.lang.Thread.run(Thread.java:534)
Caused by: java.io.IOException: open HTTP connection failed.
at sun.applet.AppletClassLoader.getBytes(AppletClassLoader.java:265)
at sun.applet.AppletClassLoader.access$100(AppletClassLoader.java:43)
at sun.applet.AppletClassLoader$1.run(AppletClassLoader.java:152)
at java.security.AccessController.doPrivileged(Native Method)
at sun.applet.AppletClassLoader.findClass(AppletClassLoader.java:149)
... 9 more
I have my applet code in the applet folder
here is my jsp call
<applet code="MyApplet" codebase="../applet" archive="SMyApplet.jar" width=400 height=400>
</applet>
here is my applet code
package applet;
import java.applet.*;
import java.awt.*;
public class MyApplet extends Applet
public void paint(Graphics g)
g.drawString("Generate Me",50, 50);
}

If i do
<APPLET CODE="xxx.class" CODEBASE="." ARCHIVE = "skshrad.jar , javax.jar" WIDTH=500 HEIGHT=500>
is it correct?
because it still appeared class not found error..
This is a signed applet
thanks..
i try to put 2 directories in a jar also did not work..

Lookout 6.0.1.: Class Not Found when trying to open project on another PC

I am using the same version on both PC's, but when I move the file over and run it, I get "Class not found!". Then "Error running process file".When running the lookout source file I get the following:
Lookout Process File Compiler Version 6.0.1 (build 1)
Copyright National Instruments 1992-2004 All rights reserved.
C:\Documents and Settings\testing\Desktop\Latest Lookout\lprocess2.lks
C:\Documents and Settings\testing\Desktop\Latest Lookout\lprocess2.lks(324): error: Class not found: DirectLogic
C:\Documents and Settings\testing\Desktop\Latest Lookout\lprocess2.lks(667): error: Class not found: Meter
C:\Documents and Settings\testing\Desktop\Latest Lookout\lprocess2.lks(670): error: Class not found: Meter
C:\Documents and Settings\testing\Desktop\Latest Lookout\lprocess2.lks(673): error: Class not found: Meter
C:\Documents and Settings\testing\Desktop\Latest Lookout\lprocess2.lks(676): error: Class not found: Meter
C:\Documents and Settings\testing\Desktop\Latest Lookout\lprocess2.lks(1977): error: Class not found: Meter
C:\Documents and Settings\testing\Desktop\Latest Lookout\lprocess2.lks(57): error: Object is not defined: DL1
C:\Documents and Settings\testing\Desktop\Latest Lookout\lprocess2.lks(667): error: Object is not defined: Meter1
C:\Documents and Settings\testing\Desktop\Latest Lookout\lprocess2.lks(670): error: Object is not defined: Meter2
C:\Documents and Settings\testing\Desktop\Latest Lookout\lprocess2.lks(673): error: Object is not defined: Meter3
C:\Documents and Settings\testing\Desktop\Latest Lookout\lprocess2.lks(676): error: Object is not defined: Meter4
I have also tried to open on 6.1 with similar results.
I am familiar with lookout, however I have taken this project over so I am not sure what I need to do from here.

There are two object (DirectLogic and Meter) that are not present on the amchine you are moving the process to. If the same version of Lookout, you might be able to just copy the cbx files.
Mike
Mike Crabtree - Lead Developer
Destek of Nevada, Inc. / Digital Telemetry Systems, Inc.
(866) 964-6948 / (760) 247-9512

Class not Found when accessing Proxy class from backing bean in VC.

Hi All,
I'm attempting to access a class of a webservice(generated as a proxy) within my ADF application and invoke the method within a backing bean of the View Controller(bean scope : backing bean). The proxy has generated an ObjectFactory class among other classes. When I access this Object factory class from within the backing bean, the application throws a Class not found error.
I don't know where the error lies since I've declared the View Controller of the ADF application dependent on the Proxy and I've imported the class and accessing it within a backing bean. How would you suggest I approach resolveing this.
JDev : 1.1.1.4
Thank you.
Regards
PP.

Hello Arun,
Thank you for suggesting a Data control, but my requirement isn't to drag and drop the method as a button. It's more of a behind the scnes updating data via a database adapter requirement.
I've resolved the issue. turns out, my deployment archive didn't include the proxy.jpr. Once included it works likea charm.
Thanks
PP.

"class not found error" and applets ...

To run an applet inside an html page using the embedded oc4j i have to copy the library containing the applet to the same directory as the html page. Otherwise i get a class not found error....Is there a better way of doing this?
thanks in advance for any advise
owen

Hi,
you should be able to reference the JAR file from teh HTML tag. If not then this sounds like a bug that should be filed
Frank

Class not found when generating deployment xml in MW

any ideas anyone?
java.lang.RuntimeException: Class not found:
     at oracle.toplink.workbench.persistence.BldrProjectToRuntimeProjectConverter.convert(Unknown Source)
     at oracle.toplink.workbench.ui.BldrSession.generateDeploymentXML(Unknown Source)
     at oracle.toplink.workbench.ui.BldrMainView.generateDeploymentXMLForSelectedProjects(Unknown Source)
     at oracle.toplink.workbench.ui.BldrActionManager$61.actionPerformed(Unknown Source)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.AbstractButton.doClick(Unknown Source)
     at javax.swing.plaf.basic.BasicMenuItemUI$MouseInputHandler.mouseReleased(Unknown Source)
     at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)

Hi,
'Class not found' in the Mapping Workbench usually means that one of your classes was not included in the 'class path' panel. In the Mapping Workbench select the project -> Class Path -> Add Entry...
For example, in my case I have Person.class, which is part of the package com.toplink.course. 'C:\dev\tl400\classes\com\toplink\course>Person.class'
So in the Mapping Workbench -> Class Path I put 'C:\dev\tl400\classes'
Raanan.

Class not found when I run JSPs

I set up and can run JSPs in iPlanet 4.1 SP9 on NT. But if I use anything
such as Date() I get a Server Error and a Class Not Found in the error log.
Can someone tell me how to confire where the .class and .jar support files
go, or where do I put them. In the JDK install directory or in the iPlanet
install directory.
Thanks, Gary

Something to note, you must have superuser priveleges to run ibconf.
Check out this document about installing a PCI-GPIB on a Solaris machine. There is a section in it on page 9 about configuring the software with ibconf.
If you still have problems after reading through this repost.
JenK

Class Not Found Error in JDeveloper with Applet

HI Gentlemen,
I have to set up an applet for my project using JDeveloper. I created an ADF application with Model and View projects, where the Model project has a very simple Applet and a HTML page to call it. The whole thing is located in ..\mywork\.. using only JDeveloper defaults. The applet only has a text field with preset contents "HI, I am the applet!" just to see that it is working. Now, when I start the run target HTML page against the applet viewer, it is OK. However, when I start against the built-in Weblogic server, the following Java console results:
Java Plug-in 1.6.0_31
Verwendung der JRE-Version 1.7.0_02-b13 Java HotSpot(TM) Client VM
Home-Verzeichnis des Benutzers = C:\Users\gksadmin
c: Konsole löschen
f: Objekte in Finalisierungswarteschlange finalisieren
g: Speicherbereinigung
h: Diese Hilfemeldung anzeigen
l: ClassLoader-Liste ausgeben
m: Speicherbelegung anzeigen
o: Protokollierung auslösen
q: Konsole ausblenden
r: Richtlinien-Konfiguration neu laden
s: System- und Bereitstellungseigenschaften ausgeben
t: Threadliste ausgeben
v: Thread-Stack ausgeben
x: ClassLoader-Cache löschen
0-5: Trace-Stufe auf <n> setzen
Laden: Klasse card.model.Applet1 nicht gefunden.
java.lang.ClassNotFoundException: card.model.Applet1
     at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass0(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:356)
     at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
     at java.lang.Thread.run(Thread.java:722)
Ausnahme: java.lang.ClassNotFoundException: card.model.Applet1
I'm sorry about it--if I add the ..\model\ directory to the Classpath, it does the same. Nothing happens with the browser.
Can anyone help me?
Thank you in advance, kind regards from
Miklos HERBOLY

HI Frank,
After expanding your Applet example it used to work fine. Now as I installed both Java and JDeveloper/Weblogic Server several times, it always complains about some jrockit. I am blurred why this option was included in the java command. Can you help a little bit?
[Waiting for the domain to finish building...]
[02:19:31 PM] Creating Integrated Weblogic domain...
[02:19:54 PM] Extending Integrated Weblogic domain...
[02:20:00 PM] Integrated Weblogic domain processing completed successfully.
*** Using port 7101 ***
C:\Users\gksadmin\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\bin\startWebLogic.cmd
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms256m -Xmx512m
WLS Start Mode=Development
CLASSPATH=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Java\JDK17~1.0\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.5.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar;.;C:\ocf\lib\ocf-cc.jar;c:\windows\system32;c:\windows\SysWOW64;lib/gemplus-service-0.3.jar;C:\ocf\de\cardcontact\opencard\terminal\ctapi4ocf;C:\Java\jdk1.7.0\jre\lib\plugin.jar
PATH=C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\native;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;C:\Java\JDK17~1.0\jre\bin;C:\Java\JDK17~1.0\bin;C:\Program Files (x86)\PC Connectivity Solution\;D:\app\gksadmin\product\11.2.0\dbhome_1\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;c:\"Program Files (x86)"\Java\jdk1.7.0\bin;c:\ocf\lib;c:\Windows/System32;C:\Java\jdk1.7.0\bin;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and   *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console        *
starting weblogic with Java version:
Error: Could not create the Java Virtual Machine.
Error: A fatal exception has occurred. Program will exit.
Unrecognized option: -jrockit
Starting WLS with line:
C:\Java\JDK17~1.0\bin\java -jrockit   -Xms256m -Xmx512m -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=C:\Oracle\Middleware\wlserver_10.3\server\lib\DemoTrust.jks -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Dcommon.components.home=C:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=C:\Users\gksadmin\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1 -Djrockit.optfile=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=C:\Users\gksadmin\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.domain.config.dir=C:\Users\gksadmin\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=C:\Users\gksadmin\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Users\gksadmin\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=C:\Users\gksadmin\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=C:\Users\gksadmin\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1\servers\DefaultServer\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\Users\gksadmin\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1\oracle\store\gmds   -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic.Server
Error: Could not create the Java Virtual Machine.
Error: A fatal exception has occurred. Program will exit.
Unrecognized option: -jrockit
Process exited.Thank you very much, regrads:
Miklos

Webutil bean not found when using call_form with no_share_library_data

Hi,
I have two Forms modules and i navigate from Form A to Form B using a call_form.
If i call Form B with NO_SHARE_LIBRARY_DATA param, i get a webutil error: "oracle.forms.webutil.file.filefunctions bean not found"
If i call it with SHARE_LIBRARY_DATA, there no error and my webutil function works as expected.
Webutil is used in our application are works well so i don't think that it's webutil config problem.
Any idea?
Tx

Thanks for your answer.
Now I'am a little bit further with my debugging but it's more strange! forget the share_library_data...
I start a common form with webutil.pll attached and i will use the Webutil_File.File_Exists function for example
if i call it in the WNFI or WNBI, i get the error
if i call it via a push-button WBP for example, it works!
below the java console ouput when i get the error and after pushing ok on the error
Loading http://sdp6:7778/sdp-jar_dev/frmwebutil.jar from JAR cache
Loading http://sdp6:7778/forms/java/frmall_jinit.jar from JAR cache
RegisterWebUtil - Loading WebUtil Version 10.1.2.2
Loading http://sdp6:7778/sdp-jar_dev/hst65.jar from JAR cache
Loading http://sdp6:7778/sdp-jar_dev/sdpimage.jar from JAR cache
Loading http://sdp6:7778/sdp-jar_dev/host.jar from JAR cache
Loading http://sdp6:7778/sdp-jar_dev/jacob.jar from JAR cache
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
La version Forms Applet est : 10.1.2.2
2008-janv.-10 18:02:24.711 WUI[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2008-janv.-10 18:02:24.727 WUI[VBeanCommon.getIPAddress()] 172.22.35.17
2008-janv.-10 18:02:24.727 WUF[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2008-janv.-10 18:02:24.727 WUF[VBeanCommon.getIPAddress()] 172.22.35.17
2008-janv.-10 18:02:24.743 WUH[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2008-janv.-10 18:02:24.743 WUH[VBeanCommon.getIPAddress()] 172.22.35.17
2008-janv.-10 18:02:24.743 WUS[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2008-janv.-10 18:02:24.743 WUS[VBeanCommon.getIPAddress()] 172.22.35.17
2008-janv.-10 18:02:24.758 WUT[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2008-janv.-10 18:02:24.758 WUT[SessionFunctions.init()] Max Transfer chunk size set to 4048
2008-janv.-10 18:02:24.758 WUT[VBeanCommon.getIPAddress()] 172.22.35.17
2008-janv.-10 18:02:24.977 WUO[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2008-janv.-10 18:02:24.977 WUO[VBeanCommon.getIPAddress()] 172.22.35.17
2008-janv.-10 18:02:24.977 WUL[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2008-janv.-10 18:02:24.977 WUL[VBeanCommon.getIPAddress()] 172.22.35.17
2008-janv.-10 18:02:24.977 WUB[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2008-janv.-10 18:02:24.977 WUB[VBeanCommon.getIPAddress()] 172.22.35.17
AFTER PUSH OK on the error
2008-janv.-10 18:07:12.977 WUI[getProperty()] Getting property WUC_BEAN_VERSION
2008-janv.-10 18:07:12.977 WUI[getProperty()] Value of WUC_BEAN_VERSION=10.1.2.2
2008-janv.-10 18:07:12.993 WUT[setProperty()] Setting property WUC_SRV_LOGGING to 0
2008-janv.-10 18:07:12.993 WUT[setProperty()] Setting property WUC_GET_LOCAL_PROPERTY to syslib.jacob.dll
2008-janv.-10 18:07:12.993 WUT[getProperty()] Getting property WUC_GET_LOCAL_PROPERTY
2008-janv.-10 18:07:13.08 WUT[loadSettings()] Local properties file loaded
2008-janv.-10 18:07:13.08 WUT[getProperty()] Value of WUC_GET_LOCAL_PROPERTY=1.0
2008-janv.-10 18:07:13.08 WUT[setProperty()] Setting property WUC_GET_LOCAL_PROPERTY to syslib.JNIsharedstubs.dll
2008-janv.-10 18:07:13.08 WUT[getProperty()] Getting property WUC_GET_LOCAL_PROPERTY
2008-janv.-10 18:07:13.08 WUT[getProperty()] Value of WUC_GET_LOCAL_PROPERTY=1.0
2008-janv.-10 18:07:13.08 WUT[setProperty()] Setting property WUC_GET_LOCAL_PROPERTY to syslib.d2kwut60.dll
2008-janv.-10 18:07:13.08 WUT[getProperty()] Getting property WUC_GET_LOCAL_PROPERTY
2008-janv.-10 18:07:13.08 WUT[getProperty()] Value of WUC_GET_LOCAL_PROPERTY=1.0
2008-janv.-10 18:07:13.24 WUB[setProperty()] Setting property WUC_SRV_LOGGING to 0
AFTER PUSH ON THE BUTTON THAT CALL THE SAME FUNCTION
2008-janv.-10 18:07:34.758 WUF[setProperty()] Setting property WUF_FILENAME to c:\temp\1.txt
2008-janv.-10 18:07:34.758 WUF[setProperty()] Setting property WUF_FILE_ATTRIBUTE to 1
2008-janv.-10 18:07:34.758 WUF[getProperty()] Getting property WUF_FILE_ATTRIBUTE
2008-janv.-10 18:07:34.758 WUF[getProperty()] Value of WUF_FILE_ATTRIBUTE=TRUE

Java class not found in IE

When I run any Java applet using IE 5 I get an error. For example, when I open
C:\j2sdk1.4.0\demo\applets\Clock\example1.html
I get
load: class Clock not found.
on the browser's status bar.
Can I get any help? Thanks in advance.

This isn't so much a regular classpath issue, as it is an applet running in a browser. The html file that references the applet must reference it correctly (something like <applet codebase="Clock.class">) and the Clock.class file must exist at the referenced directory. In the example above, it would need to live in the same directory as the html file lives. Also, it may or may not work depending on whether you're using Sun's Java Plug-in versus IE's own JVM against a class compiled with and using Sun's JDK version 1.4.

Java class not found : Run

Installed Siebel server in console mode successfully.Invoked siebel server configuration wizard as below and have been experiencing the java error:
siebel5@laatsc68 /siebel2/scapps/sieb80/siebsrvr/bin
# ./ssincfgw -args LANG=enu MODE=LIVE MODEl_FILE=/siebel2/scapps/sieb80/siebsrvr/admin/siebel_server_sia.scm -is:javaconsole -console
InstallShield Wizard
Initializing InstallShield Wizard...
Preparing Java(tm) Virtual Machine...
Running InstallShield Wizard...
The java class is not found: run
We are on AIX 5.3 TL10 .Please suggest how I can get around this hurlde.

Maybe try to clear the cache when at home, then visit the page again in office to see if that's a caching issue:
Start > Control Panel > Java > Under "General" tab, click the "View" button under Temporary Internet Files section.
In the Java Cache Viewer dialog > Select "Resources" from the "Show" drop down menu, find the row that says Name=jreVerify.class, URL= http://java.com/jsp_utils/jreVerify.class
p.s. You can sort the table view by clicking on the column head. You may want to delete other cache from java.com to detect the caching issue.
Hope that helps.

Java Class not found when starting applet with ip address

Similar Messages

Maybe you are looking for