I don't have PAL schema in my HANA Studio

Hello all, I was studying and trying to solve some problems I'm having with Hana/Predictive Analysis. I was showing some error of insufficient privileges while trying to run some algorithms.
So then I was whatching the following video:
http://www.saphana.com/docs/DOC-3261
I don't have the schema named PAL in my HANA Studio, and I don't know what I was doing wrong, and couldn't find the solution anywhere.
And to make this troubleshooting , I need to set with the schema PAL.
PS: I already have the AFL package installed, and also the WRAPPER_GENERATOR (I didn't have wrapper generator in my Studio, so then I got it from a friend of mine, and executed without any kind of error.
So then I want to know:
Did I miss any steps in configuration? Or I need to do any other installation?
Regards

Go to the link below, download and install the program. Please read the instructions on the page.
http://culater.net/software/SIMBL/SIMBL.php
Then go to the link below, download and extract the program. Put the program in the plugins folder created above.
http://cooviewerzoom.web.fc2.com/colorfulsidebar.html
Force quit Finder and when you open a new Finder window, you should have color in the sidebar, although not across the top. You will need to Force quit Finder and open a new window after almost all restarts and startups.
Not perfect, but it works.
As an alternative, you can go to the link below and download the program. In the Lion Tweaks section, there is a tweak to restore color in the Finder sidebar, but I haven't tried it, so I don't know if it works.
Hope this helps.

Similar Messages

Need PAL schema & procedure (for 'HANA Analysis Process' in BW)

In BW it is possible to register the AFL & PAL Functions for use within a BW-type called 'HANA Analysis Process' by providing the schema and the procedure (pls see screenshot below).
In what schema can I find the the PAL functions???
I assume they are procedures, right?
I have installed PAL successfully (checked tables SYS.AFL_PACKAGES_ & SYS.AFL_FUNCTIONS_ for the required function 'BINNING' which appears as expected).

You should find the PAL procedures (created with the procedure SYSTEM.afl_wrapper_generator) under the schema _SYS_AFL
For setting up the binning PAL function I suggest this video HANA Academy - PAL: Binning - YouTube

How to load SAP R/3 tables into a schema in SAP HANA Cloud Platform

Hello, everyone.
First of all, my apologies for any basic mistakes, I'm new here, so there's a lot of stuff I don't know yet.
I need to upload some tables to a schema in my HANA trial account to test some algorithms and see if the kind of application I want to build is possible, but I don't know the best way to do this.
To my understanding, using the Cloud Connector would merely make my tables visible to my application in the cloud, but it would not actually upload them (or rather, I'm sure there's a way to upload them using it, but I suspect there are far simpler methods out there).
I think one of the simplest possible methods would be to create the schema, open a tunnel using the console client, and to import the tables to the schema via the HANA Studio. Maybe, if that doesn't work, a CMIS repository could be used (although I'm somewhat skeptical, as I think something like this it's not its intended use). Or maybe there's another possibility I'm not seeing. Either way, I would love to hear some answers that could shed some light on this.
Also, as I mentioned earlier I'm only using a trial account for this, I don't know if there's any limitation that could prevent me from doing this. I'd also like to hear your opinion on this matter.
Thank you.

BUDAT is the technical name for Posting Date field. This field is used many DB Tables/ Strucutres. Using where used option you can find the required tables.
I suggest you to look at BSEG table for Finace Document postings by Posting Date.

HT204406 iTunes Match saying I'm limited to 5 devices...but I don't have 5 devices and won't work on my MacBook Pro. Please Help!

I've just got a new MacBook Pro, and want to have iTunes Match on it. But when I go to 'add this computer' in iTunes on the MacBook, a message comes up saying I've reached my limit of Match being on 5 devices. This makes no sense because I only have match on my iPad and my old Windows laptop and nothing else.
Out of curiosity, I turned off iTunes Match on my iPad to see what would happen, but I still cannot get Match on my MacBook Pro.
Please help!

Do a backup before proceeding.
Try putting the 10.6.3 disk in the computer. During a restart, hold down the option/alt key, select the disk, and see if you can boot from there. If so, select the language, then go to the Utilities menu, and select Disk Utility. Check to see what partition scheme you have by selecting the hard drive.
If you don't have GUID, you are going to need to erase the drive and reformat, which will cause you to lose all your data. Did I mention doing a backup?
If you do have GUID, run Disk Utility repair disk and repair permissions. You may have to do this more than once. Then try in install 10.6.3.
If successful, use the combo update to get to 10.6.8 and then run Software update until there are no more updates.
10.6.8 Combo Updater

How do I format a table in Pages so that I don't have to keep reformatting every time I go to a new cell?

how do I format a table in Pages so that I don't have to keep reformatting every time I go to a new cell?

Hello Fruhulda
Clicking a Pages table don't give the same result than clicking somewhere in the table then pressing cmd + a.
The first scheme selects the table (height square handles displayed)
The second one select every cells (no handle displayed).
If we try to fill cells with a color in case 1, only standard cells are filled.
If we try to do the same in case 2, every cells (headers included) will receive the color.
Yvan KOENIG (VALLAURIS, France) dimanche 12 février 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.3
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k

Who locked my table (don't have dba rights)

Hi Gurus,
I am facing locking issue.
A job is running since last 06 hours and i am not getting any output. This job normally takes 01 hr or Maximum 01:30 (hrs: min).
I do not have sharp DBA skills.
Can someone let me know how to know either my table is locked by some other job/user?
Please remember, i don't have DBA/sysdba rights. I can see only in my schema.
Appreciate prompt replies.
Thankyou.

How do you know that you are waiting on a lock and that the CBO has just not chosen a really bad plan for this specific execution of the query?
Ask the DBA to set up a role that has select privilege on v$session, v$process, v$lock, v$sql_text, and v$sql_plan and to grant that role to you (and probably all the developers).
Column v$session.lockwait will show if you session is waiting.
And you can view the actual plan for your session via v$sql_plan. This plan may vary from what explain plan shows if bind variable peeking or another Oracle run time tuning feature like SQL Profiles is in use.
HTH -- Mark D Powell --

You don't have the privileges to create or run workbooks

Hi Experts;
I am using Oracle DB 10.2 , Discoverer version 10.1.2.0, EUL 5.1.1, EUL library 10.1.2.48.18
I use Role based security in my applications i.e. I am granting privileges to the roles and then granting the roles to the users, but I am having a problem with one of the schema/EUL which I could not trace.
I have granted the bussiness area to the role "B_User", I have also granted the following Desktop and Plus Privileges to the role "B_User"
1) Create/Edit Query
2) Collect Query statistics
3) Item Drill
4) Drill out
5) Create Link
The required workbooks are shared to the roles, but when I log on to Discoverer plus and try to open the workbook it gives the following error "You don't have the privileges to create or run workbooks. Please contact your Discoverer manager". I could create the workbooks but can't run any of the workbooks( existing or newly created).
I followed the same method for granting Security and Privileges for other schemas/EUL and they are working fine.
Is there anything wrong with the EUL I created? I even tried granting security access to "Public" and granted the Desktop and Plus privileges to "Public" for the stated EUL but still have the same problem.
Any help would be highly appreciated.
Thanks
Jethoo

Hey Jethoo.
At first blush, what you've written looks fine to me (assuming all the correct grants, etc. work in other business areas in the EUL).
So, let me just go over it.
1. You granted security (not privs) on the business area to a role 'B_User'. That means that anyone going into Disco using that role will let them see the underlying data.
2. You've granted privs to the role 'B_User' to be able to play with Disco. That looks fine.
3. You've written workbooks that have been shared with the role 'B_User'. That means that the end user can run a workbook.
So what I'd look at are:
4. I assume you only have 1 EUL and if not, are pointing to the correct one (in Tools -> Options -> EUL.
5. Did you create the workbooks in Disco Plus or Disco Desktop?
6. Have you tried to run the same workbooks in Disco Desktop?
7. When you did all the Admin stuff, did you reconnect in Disco Plus / Desktop before going on?
8. Did you assign the role to the user - at the database level you're having problems with?
9. Was it Friday the 13th. when you did all this - okay, maybe that's not an issue, but reaching here.
Russ
Message was edited by:
russ_proudman

The folder "cores" can't be opened because you don't have permission to see its contents.

HELP, I did something very stupid. I used my installation disk and went into the disk utility and change the Volume Scheme to partition it to 1 volume & named it Macintosh. The prior hard drive name was possiby Macintosh HD and I renamed it Macintosh (this wiped out all the previous information). Unfortunately I did not use the Time Machine to backup my information, but I use my Iomega 500GB eGo USB 2.0/FireWire 400/FireWire 800 Portable Hard Drive to backup my information . I tried to retrieve the backup and it says that I do not have permission since I changed the previous hard drive’s name. What can I do to restore my old hard drive information. Shown below is what it shows: The folder “cores” can’t be opened because you don’t have permission to see its contents. Much appreciated if someone could help me.

I am panicking now and I am so afraid that I lost all my information by what I did.
Don't be upset. From what you've said, I don't see any reason to believe that you lost anything. You did make a lot of mistakes, though, starting with having only one backup and not testing it.
I did not use any software when I did the backup.
Yes, you did. You can't do anything with a computer without using software. Possibly what you mean is that you used the Finder. That's software. Or it may have been something else.
Hopefully you can help me , but if you can't, do you think if I contact someone at Apple can?
I'll try to help you as time permits, but it might make you feel better to make an appointment at the "Genius Bar" of a local Apple Store. They aren't really geniuses and I can't promise they'll help you with this problem, but it doesn't cost anything.

How do I switch from Mountain Lion to Snow Leopard? New used computer that I don't have anything on yet but has Mountain Lion installed.

I just puchased a used 2008 MacPro 2.8 ghz 8 core and it has Mountain Lion installed on it. I want to go back to Snow Leopard because it is a better stable OS for using Final Cut Pro 7. I just bought the Snow Leopard Discs to install. I need to erase the hard drive and install Snow Leopard. Any help on how
to do this? Thank you.

Downgrade Lion/Mountain Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer
      loads select your language and click on the Continue
      button. When the menu bar appears select Disk Utility from the
      Utilities menu.
2. After DU loads select your hard drive (this is the entry with the
      mfgr.'s ID and size) from the left side list. Note the SMART status
      of the drive in DU's status area. If it does not say "Verified" then
      the drive is failing or has failed and will need replacing. SMART
      info will not be reported on external drives. Otherwise, click on
      the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions
      from the drop down menu to one. Set the format type to Mac OS
      Extended (Journaled.) Click on the Options button, set the
      partition scheme to GUID then click on the OK button. Click on
      the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner.
If you have Snow Leopard Time Machine backups made while on Snow Leopard, then you may do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion/Mountain Lion files.

OK, the videoformat may be changed (PAL, NTSC) by plugin a specified cable, but how can I force to have PAL-format instead of NTSC to be send to iMovie via the USB-cable?

OK, the videoformat may be changed (PAL, NTSC) by plugin a specified cable to be connected the iPhone to the TV, but how can I force to have PAL-format instead of NTSC to be send to iMovie via the USB-cable? Al this transcoding afterwards takes a lot to much time. Is there a solution before sending the clips?

Well, thanks a lot. iMovie '11 is similar, but not identical and unfortunately I don't seem to find any "Frame Rate Pop-Up menu" when I generate a new Project. Do not find an "Aspect Ratio Pop-Up" either. Also the help does not speak of this options. I just have to choose a Theme and that's it. Also the "Settings" Menu for the Film does not help.
I also checked the general settings for iMovie:
So I would dare say, there is actually no possibility anymore, to set the output format. And also when I create the output file, there is nothing more than a short list of resolutions.
I do not understand why all options were taken away. I admit, I am a little disappointed.
Best regards
Claudio

HT5624 Can I use Pay pay? I don't have a credit card

I don't have a credit card, I only use Pay Pal..

Depends. Varies by country. Read here:
http://support.apple.com/kb/HT5552

How do i load software for a new printer as i don't have a disk drive!, How do i load software for a new printer as i don't have a disk drive!

Trying to help a friend who has a Mac Air, didn't think it would be as hard, but guess it's what you're used to.
Have bought a new printer Epson SX235W, and trying to load the software and connect wireless, but the only instructions that come say to use with the Disc, but don't have a disc drive - can anyone help as to how I load and connect it please as I'm having no joy from the Epson site, despite I think loading some software - Thanks Steve

Hello Fruhulda
Clicking a Pages table don't give the same result than clicking somewhere in the table then pressing cmd + a.
The first scheme selects the table (height square handles displayed)
The second one select every cells (no handle displayed).
If we try to fill cells with a color in case 1, only standard cells are filled.
If we try to do the same in case 2, every cells (headers included) will receive the color.
Yvan KOENIG (VALLAURIS, France) dimanche 12 février 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.3
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k

I have a 27 in. iMac with the latest version of Snow Leopard. When Lion comes out, will it be software I purchase and download online? I am trying to prepare for cost and don't have a point of reference, having been a Windows guy until last summer.

I want to know what to expect in terms of moving from one OS to another. Having been a Windows guy until last summer, my only experience is going from one version of Windows to another, which is usually a fairly costly purchase. I will want to go to Lion, but as a retired teacher, my income is fixed. I am not looking for a specific price, I am sure that is unknown, but I would just like to know help Apple does these things so I won't be sadly surprised.

Historically Apple has sold OS X upgrades via DVD media however with the advent of the Mac Apple Store that throws another possibility into the mix. That's about as much as I can say as these forums don't allow us to speculate about future products. As for the cost historically Apple has priced OS X upgrades between $29-$129, the last upgrade (Snow Leopard) was only $29 but that was an exception. Again we cannot speculate on these forums about that. The good news is that Apple is unlike Microsoft which makes OS upgrades expensive and complicated. The choice with OS X is do you want a server version (most users don't need one) or a single computer license. The users that buy server versions tend to have a number of Macs they manage from a server, most consumers don't have this issue.
Keep reading the news, as you know Apple has announced a Summer release for Lion.
Upgrades on OS X are usually very simple. I've upgraded from Tiger to Leopard to Snow Leopard and each transition has been very easy. With any major OS upgrade there are some basic rules to follow, for example always, always, always backup prior to any update. When Lion is released to the general public post again for what to do to prepare or even do a Google search on "How to prepare for OS X upgrade" and you will find a number of articles that will provide some suggestions and valuable insight. You can also re-post here and users will be happy to assist.

Itunes says I don't have an internet connection but I can access the internet. I turned my firewall off. How do I get onto itunes store

I can't access my itunes store, it says I don't have an internet connection but I do. I tried updating to the newest version of itunes, turned off my firewall, checked to make sure itunes was allowed in my internet options. what else can i do?

Hello bigblue8
Check out the following articles for troubleshooting access to the iTunes Store. The first one will probably get you started enough to get it taken care of. If it does not the follow up article should definitely solve it for you.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
Thanks for using Apple Support Communities.
Regards,
-Norm G.

A need to get photos of my baby from Adobe Photoshop Album Starter Edition 3.2 but I don't have a code so I cannot access in it. Somebody can help me, please?

Two days ago I introduced photos of my baby into my PC and automatically went into the programm Adobe Photoshop Album Starter Edition 3.2. Then they were deleted of my photo camera. Then I wanted to access to the photos in the Adobe Photoshop Album Starter Edition 3.2 but I read that since the end of Juny we need a decodification code and that now it is not availabel. So I don't have this code and I need to access to the photos. Please, somebody can help me?. Thank you.

Thank you for your help, Gunjan, but I have already tried to contact adobe tech support and I cannot get a code still now. I just find fixed issues where there is not shown my problem and I cannot find the way to write my question about my need of a code for Adobe Photoshop Album Starter Edition 3.2. Could you or somebody tell me the way to get the code through adobe.
Thank you
Mona05

I don't have PAL schema in my HANA Studio

Similar Messages

Maybe you are looking for