Java for Chrome

Hi,
I don't know why, once in a while my Java plugin is either not working, either missing or don't know what the **** is going on it with it but I can't use it.
I have tried to install Java 7 and it worked, but I need another version because I am using Chrome browser and on OS systems, Java 7 can not run on Chrome.
How can I get a version of Java that will work even on Chrome?
I have tried the steps presented on the following link but it doesn't work:
http://support.apple.com/kb/HT5559?viewlocale=en_US
Any suggestions?
Thanks in advance.

Yes, this is a definitely a step I would take in your troubleshooting.
Uninstall Google Chrome - Chrome Help
I think that since you followed the Apple support steps on enabling JAVA SE 6 again, and it is still not functioning on Chrome, the problem is with Chrome's current configuration on your machine and it should be cleanly reinstalled.

Similar Messages

Whenever I use something which uses Java (for example, an online game) and then click the address bar, it seems that the address bar is disabled.

Whenever I use something which uses Java (for example, an online game) and then click the address bar, it seems that the address bar is disabled. I cannot highlight or type in the address bar unless I interact with another program and then switch back to Firefox. When I interact with Java again, the same problem persists! Help!
Sorry, I didn't know what category this should be under, but it's urgent.

Perform the suggestions mentioned in the following articles:
* [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
* [[Troubleshooting extensions and themes]]
Check and tell if its working.
Some of your Firefox Plugins are out-dated
* Update All your Firefox Plugins -> [https://www.mozilla.org/en-US/plugincheck/]
* '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''

HT5367 Why does Java for OS X 2012-006 lead to this article!!!

On Apple.com -> Support -> Downloads, searching for Java for OS X 2012-006, opening the article to download leads to Java for OS X 2012-005.
So I can't download the Java, and it's telling me I have missing content.
Could use please fix this?
Regards

No I did have Java 7 installed.
Then I uninstalled it, using the guide from here: http://www.java.com/en/download/help/mac_uninstall_java.xml
It worked fine with 1.6.0_35 untill Apple released 1.6.0_37, then it just stopped working. In Safari, FF and Chrome.
Tried installing Java 7 again now that 1.7.0_9 had come out to see if that solved my problems, but no that was equally screwed. So uninstalled it again.
Where Java should run it just says "missing addon" or rather since it's danish "manglende tilbehør".
I daily support people with their computer, and I'm close to saying I have to reinstall my mac to get java working again, and that's just dumb.
If they would just link to a proper download article so you could download java 1.6.0_37 for mac os 10.8 then the world would be a but more peachy.

Disable Java for security?

I have Mac OSX 10.6.8.
I read these articles:
How to Detect and Protect Against Updated Flashback Malware
http://tidbits.com/article/12918
Flashback botnet: The end of the Mac’s malware immunity?
http://www.digitaltrends.com/computing/flashback-botnet-the-end-of-the-macs-malw are-immunity/
Beware the Morphing Flashback Malware
http://tidbits.com/article/12818
So, I disabled Java in all 4 of my installed browsers. So far I have not noticed any downside.
“Disabling Java will block Flashback’s “drive-by” attack, and is the most effective way for earlier users of Mac OS X to protect themselves.
          •          Safari—Go to Preferences > Security, and uncheck “Enable Java.” (While you’re in there, go to Preferences > General and make sure “Open ‘Safe’ files after downloading” is unchecked.)
          •          Firefox—Choose Tools > Add-ons, select the Plug-ins Tab, and click the “Disable” button next to Java Plug-in.
          •          Chrome — Type chrome://plugins in Chrome’s address bar. A list of available plug-ins will appear. Find Java and click the “Disable” link beneath it.
This doesn’t remove Java from your system, it just prevents Web browsers from launching or running Java apps. That’s enough to protect you from the drive-by nature of the Flashback attack. You’ll still be able to run desktop applications that require Java — a common example is things like Citrix’s GoToMeeting — but you may find you need to selectively re-enable Java in a browser to log in to services or download updates. In that case, you can selectively re-enable Java to get an app running, then disable it again when you’re done.”
http://www.digitaltrends.com/computing/flashback-botnet-the-end-of-the-macs-malw are-immunity/
I also disabled Java in Opera browser from opera:plugins
Comments?

The latest threat is through authentic-looking, but fraudulent Adobe Flash installation dialogs which can only appear when using a browser. Diabling Java will prevent the trojan from entering your system that way.
Java can also run as a standalone app for other programs designed for it. I believe Limewire was one example. It's been defunct for years and I don't know if there are any similar programs in common use. Disabling Java in Java Preferences as you explained will shut that door for good.
For what it's worth I have not needed Java for anything since I bought my latest iMac. When I opened Java Preferences I got this:
I was kind of surprised that I never even installed it. It's fair to say you probably won't miss it.
The digitaltrends headline you referenced is misleading - Mac malware has existed in many forms for many years. OS X gives complete and unfettered access to any program, good or evil, that a user chooses to install by granting access with his login name and password.
This is nothing new, nor does it herald the "end of immunity" since immunity never existed.

Java on Chrome - what are you doing Oracle?

Google have made clear for a long time that the NPAPI support in Chrome will be switched off, and that plugins using NPAPI should move to PPAPI.
What is being done to migrate the Java plugin?
Chrome has by far the biggest user base, and as of update 42 (on Windows - much earlier on Linux) NPAPI is no longer supported. Which means no more Java.
Adobe has already updated the Flash plugin. What are you doing Oracle?

Once oracle in a forms forum suggested they had a way to launch java code from the web directly to java
installed on the client and not using a browser plugin. But they are cagey like let's wait and see if the customers
end up with no way to run applets for a few months and if so then we could assign some developers to this. Whereas from
the customer point of view, the very first minute that personnel cannot run mission critical applets is a serious problem
for which the customer feels they should come up with a plan to deal with it now. Now wait until it happens.
However web start or similar depends on java being installed on the client.
This was an interesting article:
Android is the new Win32, the new Java and the new Flash
Marketing stuff but it points out an idea of using Android Runtime for Chrome” (ARC).
There's many other potential solutions possible such as getting the firefox source now that can run the jre plugin
and keeping it for later :-) Or taking the firefox source that won't run the plugin in the future and fixing it. Or some
other browser source that can run the plugin. This is something we customers can do. It is certainly something Oracle
can do but they have to have the think ahead mindset.

Is there an equivalent statement in Java for this PL/SQL stmt?

Hi,
I want to know if there is an equivalent statement
in java for this PL/SQL statement:
IF strTok IN('COM-1','COM-2','COM-3') Then
/* Do Something */
End If;
I tried using : // This is giving me errors..
if (strTok.equals(("COM-1") || ("COM-2") || ("COM-3") ) )
/* Do Something */
The above Java code is giving me errors.
Any Help to reduce the number of steps for comparison
is appreciated.
thanks in adv
Sharath

Something like
if (strTok.equals("COM-1") ||
strTok.equals("COM-2") ||
strTok.equals("COM-3") )Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

How to get the last inserted Autoincrement value in Java for Pervasive DB

Hi, I need to get the last inserted auto incremented value after the record is inserted IN JAVA For ex. consider we have 4 columns for the myTable in the PERVASIVE DATABASE V10 autoid - identity column (auto increment column) userID userName pageID insertSqlExpression = insert into myTable (userID , userName, pageID) values( ? ,? ,?); prepareInsert = connection.prepareStatement(insertSqlExpression); prepareInsert .excuteUpdate; After inserting the new record how can I get the autoid value (last inserted value) in the Java. Please help me.
Thanks in advance. Arthik

JavaArthikBabu wrote:
I dont have privileges to write new stored procedures in database.I need to do in the Java side only. In many databases that irrelevant. The same way you would do it in a proc can be done with the correctly conceived statement (singular.)
For ex  if we insert and then the select record's identity value as a single transaction and would this guarantee that what is returned by the select would not include inserts that another might have made?Please do not take that path unless you are absolutely certain that your database does not support any other way to do it.

Help - I cannot set the Default Java for Browsers

Hello:
I'm running Win 7, the Home Premium, 64 bit flavor. I have IE 8 and FF 3.5.8 installed. FF is the default browser. I've installed Java and when I go to the test page: http://www.java.com/en/download/help/testvm.xml
I get a message which says: "Something is wrong. Java is not working."
HOWEVER, if I open a command prompt and type java -version, I get this:
C:\Users\dogzilla>java -version
java version "1.6.0_17"
Java(TM) SE Runtime Environment (build 1.6.0_17-b04)
Java HotSpot(TM) Client VM (build 14.3-b01, mixed mode)
So I went to the control panel app, the advanced tab, and expanded the node for Default Java for Browsers. I have 2 problems.
1. The checkbox for Microsoft Internet Explorer is greyed out; I cannot change any settings here at all.
2. I checked the checkbox for Mozilla Family. Then, when I click OK, I get an error message which states:
"Unable to change browser settings. Please check that Mozilla or Firefox or Netscape is properly installed on the system and/or that you have sufficient permissions to change system settings."
Since I'm writing this message to the forum using FF, I'm going to guess that I have the browser installed correctly. So that leaves me with a permissions problem -- which I don't doubt. I have no idea where to start looking though. Especially considering I can run the files in the bin directory from a command line without any problems.
Does anyone know how I can solve the two problems I described in this thread? Suggestions are greatly appreciated.
Thanks!

Thanks for the reply!
I tried running as admin and no luck. Still experiencing the same problems.
I've did some more reading (much more in fact for what this problem should be worth) and other forums mention that on 64 bit Windows systems, both the 32 bit and 64 bit JRE need to be installed.
When I was running Win XP, I could just download the SDK, create an environment variable, and I was good to go. Now, it looks like if I just install the SDK, I need the JRE plugin download for just the browsers -- what a ridiculous waste/duplication!
Thanks again for your help.

ColdFusion 8 Fails to start after update Java for Mac OSX 10.5 Update 4

I have been using ColdFusion on a Mac for years. Now CF fails to start after I updated Java for Mac OS X 10.5 Update 4. I usually start by typing in the terminal window sudo /Applications/ColdFusion8/bin/ColdFusion start.
There is a crash report but I don't know how to read it. See attached.
Please help, I need this working for my job.
Thanks...Colin

Dear Craig,
Macbook Pro 2.4GHz Intel Core 2 Duo 4 GB RAM
I'm sure that this is 64-bit
CF 8.0.1 Enterprise Build 3080
I had moved the Java SE 6 to the top in both Plugin and Applications. The
correct version is showing in the terminal window. See below.
Last login: Thu Jun 18 11:27:09 on ttys001
Beta-4:~ Colin$ java -version
java version "1.6.0_13"
Java(TM) SE Runtime Environment (build 1.6.0_13-b03-211)
Java HotSpot(TM) 64-Bit Server VM (build 11.3-b02-83, mixed mode)
Beta-4:~ Colin$
CF will not start. I have the activity monitor open, and when I start CF you
see it in the activity monitor for a few seconds as it starts up. When the
message process is completed in the terminal window CF disappears in the
activity monitor.
Any suggestions?
C
Hi, Colin,
My apologies but I forgot to ask 2 questions: (1) What kind of Mac you have
(Intel or PowerPC)? (2) What version of CF are you running and what installer
did you choose (8 or 8.0.1, 32-bit, 64-bit, etc.)?
To start, try the following:
1. Normally you'd shut CF down first ... but that's not necessary for you
2. Open Java Preferences again
3. Select Java SE 6 and move it (drag) to the top spot in both section (Applet
Plugin and Applications)
4. Open Terminal
5. Type java -version (you should see 1.6.0_13 as the new version)
6. Try to start CF again
This may not work (I've had issues with it) but it's technically how it's
supposed to work. With the Java Preferences utility, you're visually setting a
default JVM (you can do it with commands in Terminal but this is much faster
and easier).
If CF still won't start, look for the jvm.config file in your CF application
folder (try /Applications/ColdFusion8/bin or
/Applications/ColdFusion8/runtime/bin -- the latter is where a jvm.config file
is on my machine for a particular version of CF that's installed similar to
yours). You can override the JVM in this file but, hopefully, that won't be
necessary!
Best,
Craig

The Java for Mac OSX 10.5 Update 10 removed the Java plugin from Firefox 5.0. How do I re-install it?

I've just installed Java for Mac OSX 10.5 Update 10 and can no longer run Java Applets from Firefox 5.0

Dear Craig,
Macbook Pro 2.4GHz Intel Core 2 Duo 4 GB RAM
I'm sure that this is 64-bit
CF 8.0.1 Enterprise Build 3080
I had moved the Java SE 6 to the top in both Plugin and Applications. The
correct version is showing in the terminal window. See below.
Last login: Thu Jun 18 11:27:09 on ttys001
Beta-4:~ Colin$ java -version
java version "1.6.0_13"
Java(TM) SE Runtime Environment (build 1.6.0_13-b03-211)
Java HotSpot(TM) 64-Bit Server VM (build 11.3-b02-83, mixed mode)
Beta-4:~ Colin$
CF will not start. I have the activity monitor open, and when I start CF you
see it in the activity monitor for a few seconds as it starts up. When the
message process is completed in the terminal window CF disappears in the
activity monitor.
Any suggestions?
C
Hi, Colin,
My apologies but I forgot to ask 2 questions: (1) What kind of Mac you have
(Intel or PowerPC)? (2) What version of CF are you running and what installer
did you choose (8 or 8.0.1, 32-bit, 64-bit, etc.)?
To start, try the following:
1. Normally you'd shut CF down first ... but that's not necessary for you
2. Open Java Preferences again
3. Select Java SE 6 and move it (drag) to the top spot in both section (Applet
Plugin and Applications)
4. Open Terminal
5. Type java -version (you should see 1.6.0_13 as the new version)
6. Try to start CF again
This may not work (I've had issues with it) but it's technically how it's
supposed to work. With the Java Preferences utility, you're visually setting a
default JVM (you can do it with commands in Terminal but this is much faster
and easier).
If CF still won't start, look for the jvm.config file in your CF application
folder (try /Applications/ColdFusion8/bin or
/Applications/ColdFusion8/runtime/bin -- the latter is where a jvm.config file
is on my machine for a particular version of CF that's installed similar to
yours). You can override the JVM in this file but, hopefully, that won't be
necessary!
Best,
Craig

HT5717 Our company had to remove this Java for OS 2013-004 upgrade because it broke all of our Java installers. Does anyone know when Apple will solve this new problem?

Hi,
People at our company installed the latest Java for OSX 2013-004 1.0 Apple Update and all of our software installers failed to run anymore. The only way to kill the installer was Apple Menu -> Force Quit after that. We all had to downgrade to Java for OSX 2013-003 to work.

Welcome to Apple Support Communities
I have heard problems with that update. Unfortunately, we don't know when an update will be available. Apple often releases Java updates at the same time as Oracle, but we don't know more things

How Do I Get Java For Mac OSX 10.5.8 On A PowerBook G4 Or Update To Minimum MAC OSX 10.6.8 or later Without Spending Any Tech Mind Of My Own And Also Not Buy ANYTHING AT ALL!!!?????

How Do I Get Java For Mac OSX 10.5.8 On A PowerBook G4 Or Update To Minimum MAC OSX 10.6.8 or later Without Spending Any Tech Mind Of My Own And Also Not Buy ANYTHING AT ALL!!!????? Please Help!!!

Sorry, it's for 64 bit IntelMacs only...
updating Java SE 6 to 1.6.0_26 for 64-bit capable Intel-based Macs.
Java for Mac OS X 10.5 Update 10

HT4884 java for 10.6.8 is not working

my iMac says all software is up to date but websites that need java still say that i need to update to the latest version of java.

For OS 10.6.8, I found the latest Java update didn't work right, either. I restored full functionality by reinstalling Snow Leopard from the DVD, then updating to 10.6.8, plus updating Safari, etc, BUT NOT JAVA. Java works fine as long as you don't go too far with the updates: make sure they say they're for 10.6.x .
I think the problems begin with update 11, which seems to be tailored for OS 10.7 Lion and higher, but the installer doesn't check what OS you have before updating, nor is there any warning before you click install.
John
Model Identifier:
iMac8,1
Processor Name:
Intel Core 2 Duo
Processor Speed:
2.4 GHz
Mac OS X 10.6.8

How the heck do I install java for yosemite?

I've tried following the links, but everytime I hit the download button nothing happens. Not. A. Darned. Thing. And I keep getting the message that I need to install Java for things to run properly.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

User defined function in java for message mapping

I wrote the following user defined function in java for message mapping and mapped vendor with this. The aim of this function is to write a error file at defined path when i send empty Vendor value from File to RFC-Function module BAPI_PO_CREATE. The "err.txt" error file is not written when i execute in TEST but the value "ERROR" is returned to destination Vendor Field.
public String validation(String a, Container container) {
//write your code here
if (a.equals("")) {
try {
String source = "Vendor cannot be empty";
char buffer[] = new char[source.length()];
source.getChars(0, source.length(), buffer, 0);
for (int i = 0; i < buffer.length; i +=2)
f0.write(buffer<i>);
f0.close();
FileWriter f1 = new FileWriter("/10.10.0.55/sapmnt/trans/edixiin/err.txt");
f1.write(buffer);
f1.close();
catch (IOException e) {}
return "ERROR";

Hi Senthil,
Check these things :
1) Whether you have permission to create a file in that directory.
2) try giving this
10.10.0.55
sapmnt
trans
edixiin
err.txt
3) Also check for permissions.
Hope this will help you.
Regards
Suraj

Java for Chrome

Similar Messages

Maybe you are looking for