Java installation +  solaris zones ...

Hi ...
I had installed Solaris 10 in x86 VM ... created the 2 local zones under Global zone. So I want know whether I can install two diffrent versions of java in the two diffrent local zones & try to open both the versions of Java in the global zone at the same moment?
if yess ... then kindly provide me the step-by-step procedure to do this ..
thanks in advance,
Sam

If the zones are "full" zones than it would seem to be a snap - but why are your running zones on a VM ?
I just take the standard build and clone it using VIC, play with the new VM until I have rendered it useless, then wipe it.

Similar Messages

  • SAP Java and Solaris Zones SolMan 4.0

    May require Solaris Zones experience to continue.
    I have three SAP database instances/central instances running in three sparse Solaris zones with no problem.
    I have created a new sparse zone for a new SAP installation (Solution Manager 4.0) and started the installation. SAP requires a 1.4.2 SDK even though Java 1.5 comes with Solaris 10. The 1.4.2 SDK is in /usr/j2se. The installation in the sparse zone errors out because it can't get "write" rights to /usr/j2se/jre/lib/security/local_policy.jar as it is trying to install some security encryption JCE component.
    I have thought about creating a /usr/j2se_zonename file system, copying the contents of /usr/j2se into it and then mounting /usr/j2se_zonename in the zone as a lofs with the name /usr/j2se. However when I do the copy of /usr/j2se I get some recursion errors.
    Any thoughts about how to add a writable /usr/j2se into the sparse zone with the least amount of effort ? Otherwise plan B would be to create a "large" zone with a writable /usr directory.
    Received a great answer, that while it may not be architecturally "pure" it may get the job done.
    You might just download the relevant JDK tarball and unpack that
    somewhere in your zone (anywhere you like), and point SAP at it...
    http://java.sun.com/j2se/1.4.2/download.html
    Get the one called "self extracting file"-- you can unpack that anywhere
    you want.
    Message was edited by: Atis Purins

    Hi Russ,
    no you only have to generate two RFCs to your R/3 and assign them in SMSY to for system monitoring
    Then you need a Solution, assign your R/3 to the Solution, setup the system monitoring.
    Regards,
    uDo

  • SAP AS JAVA installation in Solaris Zone envirn throws OUT of Memory error.

    Hi,
    We are installing SAP NW2004s 7.0 SR3 AS JAVA on Solaris 10 in zone environment. Thsi was prod server getting build where on top of this we will install GRC 5.3.
    We have faced no issues in development build.
    But during the Prod build at databse create step, we are getting the below error
    ORA-27102: out of memory
    SVR4 Error: 22: Invalid argument
    Disconnected
    SAPinst log entries where error messages started:
    04:43:58.128
    Execute step createDatabase of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraDbBuild|ind|ind|ind|ind|5|0
    INFO 2011-04-01 04:45:14.590
    Working directory changed to /tmp/sapinst_exe.16718.1301647358.
    INFO 2011-04-01 04:45:14.595
    Working directory changed to /tmp/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS.
    INFO 2011-04-01 04:45:14.609
    Working directory changed to /tmp/sapinst_exe.16718.1301647358.
    INFO 2011-04-01 04:45:14.621
    Working directory changed to /tmp/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS.
    INFO 2011-04-01 04:45:14.850
    Account oraac5 already exists.
    INFO 2011-04-01 04:45:14.852
    Account dba already exists.
    INFO 2011-04-01 04:45:14.852
    Account oraac5 already exists.
    INFO 2011-04-01 04:45:14.853
    Account dba already exists.
    INFO 2011-04-01 04:45:14.867
    Working directory changed to /tmp/sapinst_exe.16718.1301647358.
    INFO 2011-04-01 04:45:14.899
    Working directory changed to /tmp/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS.
    ERROR 2011-04-01 04:45:32.280
    CJS-00084  SQL statement or script failed. DIAGNOSIS: Error message: ORA-27102: out of memory
    SVR4 Error: 22: Invalid argument
    Disconnected
    . SOLUTION: See ora_sql_results.log and the Oracle documentation for details.
    ERROR 2011-04-01 04:45:32.286
    MUT-03025  Caught ESAPinstException in Modulecall: ORA-27102: out of memory
    SVR4 Error: 22: Invalid argument
    Disconnected
    ERROR 2011-04-01 04:45:32.453
    FCO-00011  The step createDatabase with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraDbBuild|ind|ind|ind|ind|5|0|createDatabase was executed with status ERROR ( Last error reported by the step :Caught ESAPinstException in Modulecall: ORA-27102: out of memory
    SVR4 Error: 22: Invalid argument
    Disconnected
    ora_sql_results.log
    04:45:15 SAPINST ORACLE start logging for
    SHUTDOWN IMMEDIATE;
    exit;
    Output of SQL executing program:
    SQL*Plus: Release 10.2.0.4.0 - Production on Fri Apr 1 04:45:15 2011
    Copyright (c) 1982, 2007, Oracle.  All Rights Reserved.
    Connected to an idle instance.
    ORA-01034: ORACLE not available
    ORA-27101: shared memory realm does not exist
    SVR4 Error: 2: No such file or directory
    Disconnected
    SAPINST: End of output of SQL executing program /oracle/AC5/102_64/bin/sqlplus.
    SAPINST found errors.
    SAPINST The current process environment may be found in sapinst_ora_environment.log.
    2011-04-01, 04:45:15 SAPINST ORACLE stop logging
    ================================================================================
    2011-04-01, 04:45:15 SAPINST ORACLE start logging for
    STARTUP NOMOUNT;
    exit;
    Output of SQL executing program:
    SQL*Plus: Release 10.2.0.4.0 - Production on Fri Apr 1 04:45:15 2011
    Copyright (c) 1982, 2007, Oracle.  All Rights Reserved.
    Connected to an idle instance.
    ORA-27102: out of memory
    SVR4 Error: 22: Invalid argument
    Disconnected
    SAPINST: End of output of SQL executing program /oracle/AC5/102_64/bin/sqlplus.
    SAPINST found errors.
    SAPINST The current process environment may be found in sapinst_ora_environment.log.
    2011-04-01, 04:45:32 SAPINST ORACLE stop logging
    Already viewed S-note
    724713 - parameter settings for Solaris 10 - (Parameters are set as per this note)
    743328 - Composite SAP note: ORA-27102 - (no much information in memory problem on zones)
    Please provide your suggestions/resolution.
    Thankyou.

    Hi,
    @ Sunny: Thanks for response, the referred note was already checked and parameters are in sync as per note.
    @Mohit: SAP wouldn't proceed till create database if Oracle software was not installed. thanks for the response.
    @Markus: Thanks I agree with you, but I have doubt in this area. Isn't it like project.max-shm-memory was new parameter we need to set in local zone rather using shmsys:shminfo_shmmax in /etc/system. Do we need to still maintain this parameter in /etc/system in global zone.
    As per SUN doc below parameter was obsolete from Solaris 10.
    The following parameters are obsolete.
    ■ shmsys:shminfo_shmmni
    ■ shmsys:shminfo_shmmax
    As per your suggestion, do we need to set below parameters in that case, please clarify.
    Parameter                           Replaced by Resource Control      Recommended Value
    semsys:seminfo_semmni   project.max-sem-ids                      100
    semsys:seminfo_semmsl   process.max-sem-nsems               256
    shmsys:shminfo_shmmax  project.max-shm-memory             4294967295
    shmsys:shminfo_shmmni   project.max-shm-ids                       100
    Also   findings of /etc/release
    more /etc/release
    Solaris 10 10/08 s10s_u6wos_07b SPARC
    Regards,
    Sitarama.

  • Zfs core dumps in Solaris Zones after patchcluster installation

    Hi
    I've installed the recommended patch cluster for Solaris 10 (SPARC) on my T2000 Server.
    Now after the reboot all the Solaris Zones (got about 10 of them) instantly do zfs core dumps when their booted.
    Some Output:
    Dec 15 15:34:43 XXXXX genunix: NOTICE: core_log: zfs[1711] core dumped: /var/core/core_XXXXXX_zfs_0_0_1292423682_1711
    bash-3.00# svcs
    STATE STIME FMRI
    online 13:58:50 svc:/system/svc/restarter:default
    online 13:58:51 svc:/system/filesystem/root:default
    online 13:58:51 svc:/network/loopback:default
    online 13:58:53 svc:/network/pfil:default
    online 13:58:54 svc:/system/installupdates:default
    online 13:58:55 svc:/system/boot-archive:default
    online 13:58:56 svc:/network/physical:default
    online 13:58:57 svc:/system/filesystem/usr:default
    online 13:58:57 svc:/system/identity:node
    online 13:58:58 svc:/system/device/local:default
    online 13:58:58 svc:/system/keymap:default
    online 13:58:58 svc:/milestone/devices:default
    online 13:58:58 svc:/system/filesystem/minimal:default
    online 13:58:58 svc:/system/rmtmpfiles:default
    online 13:58:58 svc:/system/cryptosvc:default
    online 13:58:59 svc:/system/identity:domain
    online 13:58:59 svc:/system/name-service-cache:default
    online 13:58:59 svc:/system/coreadm:default
    online 13:58:59 svc:/network/ipsec/ipsecalgs:default
    online 13:58:59 svc:/application/print/ppd-cache-update:default
    online 13:58:59 svc:/network/ipsec/policy:default
    online 13:59:00 svc:/milestone/network:default
    online 13:59:00 svc:/network/initial:default
    online 13:59:00 svc:/system/manifest-import:default
    online 13:59:00 svc:/network/service:default
    online 13:59:00 svc:/milestone/single-user:default
    online 13:59:00 svc:/network/dns/client:default
    online 13:59:00 svc:/network/routing-setup:default
    online 13:59:00 svc:/milestone/name-services:default
    online 13:59:03 svc:/milestone/sysconfig:default
    online 13:59:03 svc:/system/utmp:default
    online 13:59:03 svc:/system/console-login:default
    offline 13:58:51 svc:/system/sysidtool:net
    offline 13:58:51 svc:/network/rpc/bind:default
    offline 13:58:51 svc:/system/sysidtool:system
    offline 13:58:52 svc:/network/nfs/status:default
    offline 13:58:52 svc:/network/nfs/nlockmgr:default
    offline 13:58:52 svc:/network/nfs/cbd:default
    offline 13:58:52 svc:/network/nfs/mapid:default
    offline 13:58:52 svc:/network/inetd:default
    offline 13:58:52 svc:/network/nfs/client:default
    offline 13:58:52 svc:/system/filesystem/autofs:default
    offline 13:58:53 svc:/system/system-log:default
    offline 13:58:53 svc:/network/smtp:sendmail
    offline 13:58:53 svc:/system/cron:default
    offline 13:58:53 svc:/milestone/multi-user:default
    offline 13:58:54 svc:/application/management/snmpdx:default
    offline 13:58:54 svc:/application/management/dmi:default
    offline 13:58:54 svc:/application/management/seaport:default
    offline 13:58:54 svc:/network/ssh:default
    offline 13:58:54 svc:/milestone/multi-user-server:default
    offline 13:58:54 svc:/application/font/fc-cache:default
    offline 13:58:55 svc:/application/management/sma:default
    offline 13:58:58 svc:/system/sac:default
    offline 13:59:00 svc:/network/shares/group:default
    offline 13:59:00 svc:/system/boot-archive-update:default
    maintenance 15:34:43 svc:/system/filesystem/local:default
    uninitialized 13:58:52 svc:/network/rpc/gss:default
    uninitialized 13:58:54 svc:/application/font/stfsloader:default
    uninitialized 13:58:55 svc:/network/rpc/rstat:default
    uninitialized 13:58:55 svc:/application/print/rfc1179:default
    uninitialized 13:58:55 svc:/application/x11/xfs:default
    uninitialized 13:58:55 svc:/network/finger:default
    uninitialized 13:58:55 svc:/network/ftp:default
    uninitialized 13:58:56 svc:/network/login:rlogin
    uninitialized 13:58:56 svc:/network/nfs/rquota:default
    uninitialized 13:58:56 svc:/network/rpc/rusers:default
    uninitialized 13:58:56 svc:/network/rpc/smserver:default
    uninitialized 13:58:57 svc:/network/security/ktkt_warn:default
    uninitialized 13:58:57 svc:/network/shell:default
    uninitialized 13:58:57 svc:/network/telnet:default
    uninitialized 13:58:58 svc:/network/rpc-100235_1/rpc_ticotsord:default
    uninitialized 13:58:58 svc:/network/rpc/cde-calendar-manager:default
    uninitialized 13:58:59 svc:/network/rpc/cde-ttdbserver:tcp
    bash-3.00# svcs -x
    svc:/system/filesystem/local:default (local file system mounts)
    State: maintenance since Wed Dec 15 15:34:43 2010
    Reason: Start method exited with $SMF_EXIT_ERR_FATAL.
    See: http://sun.com/msg/SMF-8000-KS
    See: /var/svc/log/system-filesystem-local:default.log
    Impact: 24 dependent services are not running. (Use -v for list.)
    svc:/network/rpc/gss:default (Generic Security Service)
    State: uninitialized since Wed Dec 15 13:58:52 2010
    Reason: Restarter svc:/network/inetd:default is not running.
    See: http://sun.com/msg/SMF-8000-5H
    See: gssd(1M)
    Impact: 11 dependent services are not running. (Use -v for list.)
    svc:/network/rpc/rstat:default (kernel statistics server)
    State: uninitialized since Wed Dec 15 13:58:55 2010
    Reason: Restarter svc:/network/inetd:default is not running.
    See: http://sun.com/msg/SMF-8000-5H
    See: rpc.rstatd(1M)
    See: rstatd(1M)
    Impact: 1 dependent service is not running. (Use -v for list.)
    bash-3.00# cat /var/svc/log/system-filesystem-local:default.log
    [ Jul 10 03:41:35 Enabled. ]
    [ Jul 10 03:43:45 Rereading configuration. ]
    [ Jul 10 03:44:17 Executing start method ("/lib/svc/method/fs-local") ]
    bootadm: this operation is not supported on sparc
    [ Jul 10 03:44:18 Method "start" exited with status 0 ]
    [ Jul 10 12:44:36 Enabled. ]
    [ Jul 10 12:44:45 Executing start method ("/lib/svc/method/fs-local") ]
    bootadm: this operation is not supported on sparc
    [ Jul 10 12:44:45 Method "start" exited with status 0 ]
    [ Jul 10 12:45:03 Enabled. ]
    [ Jul 10 12:45:09 Executing start method ("/lib/svc/method/fs-local") ]
    bootadm: this operation is not supported on sparc
    [ Jul 10 12:45:09 Method "start" exited with status 0 ]
    [ Jul 10 13:54:39 Enabled. ]
    [ Jul 10 13:54:46 Executing start method ("/lib/svc/method/fs-local") ]
    bootadm: this operation is not supported on sparc
    [ Jul 10 13:54:46 Method "start" exited with status 0 ]
    [ Jul 18 12:34:19 Enabled. ]
    [ Jul 18 12:34:27 Executing start method ("/lib/svc/method/fs-local") ]
    bootadm: this operation is not supported on sparc
    [ Jul 18 12:34:27 Method "start" exited with status 0 ]
    [ Jul 18 17:29:08 Enabled. ]
    [ Jul 18 17:29:15 Executing start method ("/lib/svc/method/fs-local") ]
    bootadm: this operation is not supported on sparc
    [ Jul 18 17:29:15 Method "start" exited with status 0 ]
    [ Jul 19 11:13:34 Enabled. ]
    [ Jul 19 11:13:42 Executing start method ("/lib/svc/method/fs-local") ]
    bootadm: this operation is not supported on sparc
    [ Jul 19 11:13:42 Method "start" exited with status 0 ]
    [ Jul 19 11:32:23 Enabled. ]
    [ Jul 19 11:32:30 Executing start method ("/lib/svc/method/fs-local") ]
    bootadm: this operation is not supported on sparc
    [ Jul 19 11:32:31 Method "start" exited with status 0 ]
    [ Jul 19 11:57:06 Enabled. ]
    [ Jul 19 11:57:13 Executing start method ("/lib/svc/method/fs-local") ]
    bootadm: this operation is not supported on sparc
    [ Jul 19 11:57:13 Method "start" exited with status 0 ]
    [ Jul 19 12:40:05 Enabled. ]
    [ Jul 19 12:40:12 Executing start method ("/lib/svc/method/fs-local") ]
    bootadm: this operation is not supported on sparc
    [ Jul 19 12:40:12 Method "start" exited with status 0 ]
    [ Jul 20 15:51:46 Enabled. ]
    [ Jul 20 15:51:54 Executing start method ("/lib/svc/method/fs-local") ]
    bootadm: this operation is not supported on sparc
    [ Jul 20 15:51:54 Method "start" exited with status 0 ]
    [ Jul 24 11:42:17 Enabled. ]
    [ Jul 24 11:42:25 Executing start method ("/lib/svc/method/fs-local") ]
    bootadm: this operation is not supported on sparc
    [ Jul 24 11:42:25 Method "start" exited with status 0 ]
    [ Jul 27 12:05:06 Stopping because service disabled. ]
    [ Jul 27 12:05:07 Executing stop method (null) ]
    [ Jul 27 12:13:10 Enabled. ]
    [ Jul 27 12:13:17 Executing start method ("/lib/svc/method/fs-local") ]
    bootadm: this operation is not supported on sparc
    [ Jul 27 12:13:17 Method "start" exited with status 0 ]
    [ Jul 27 13:10:26 Stopping because service disabled. ]
    [ Jul 27 13:10:26 Executing stop method (null) ]
    [ Jul 27 13:18:19 Enabled. ]
    [ Jul 27 13:18:26 Executing start method ("/lib/svc/method/fs-local") ]
    bootadm: this operation is not supported on sparc
    [ Jul 27 13:18:26 Method "start" exited with status 0 ]
    [ Jul 31 10:12:31 Enabled. ]
    [ Jul 31 10:12:38 Executing start method ("/lib/svc/method/fs-local") ]
    bootadm: this operation is not supported on sparc
    [ Jul 31 10:12:39 Method "start" exited with status 0 ]
    [ Aug  7 10:08:52 Stopping because service disabled. ]
    [ Aug  7 10:08:52 Executing stop method (null) ]
    [ Aug  7 10:34:50 Enabled. ]
    [ Aug  7 10:34:57 Executing start method ("/lib/svc/method/fs-local") ]
    bootadm: this operation is not supported on sparc
    [ Aug  7 10:34:58 Method "start" exited with status 0 ]
    [ Aug  9 09:14:50 Stopping because service disabled. ]
    [ Aug  9 09:14:50 Executing stop method (null) ]
    [ Aug  9 09:55:03 Enabled. ]
    [ Aug  9 09:55:10 Executing start method ("/lib/svc/method/fs-local") ]
    bootadm: this operation is not supported on sparc
    [ Aug  9 09:55:11 Method "start" exited with status 0 ]
    [ Aug 16 10:46:43 Enabled. ]
    [ Aug 16 10:46:50 Executing start method ("/lib/svc/method/fs-local") ]
    bootadm: this operation is not supported on sparc
    [ Aug 16 10:46:50 Method "start" exited with status 0 ]
    [ Aug 16 12:06:56 Enabled. ]
    [ Aug 16 12:07:02 Executing start method ("/lib/svc/method/fs-local") ]
    bootadm: this operation is not supported on sparc
    [ Aug 16 12:07:02 Method "start" exited with status 0 ]
    [ Aug 16 13:45:10 Enabled. ]
    [ Aug 16 13:45:16 Executing start method ("/lib/svc/method/fs-local") ]
    bootadm: this operation is not supported on sparc
    [ Aug 16 13:45:16 Method "start" exited with status 0 ]
    [ Aug 16 14:36:59 Enabled. ]
    [ Aug 16 14:37:07 Executing start method ("/lib/svc/method/fs-local") ]
    bootadm: this operation is not supported on sparc
    [ Aug 16 14:37:07 Method "start" exited with status 0 ]
    [ Aug 16 15:00:40 Enabled. ]
    [ Aug 16 15:00:47 Executing start method ("/lib/svc/method/fs-local") ]
    bootadm: this operation is not supported on sparc
    [ Aug 16 15:00:47 Method "start" exited with status 0 ]
    [ Aug 22 16:00:13 Enabled. ]
    [ Aug 22 16:00:21 Executing start method ("/lib/svc/method/fs-local") ]
    bootadm: this operation is not supported on sparc
    [ Aug 22 16:00:21 Method "start" exited with status 0 ]
    [ Aug 23 09:49:04 Enabled. ]
    [ Aug 23 09:49:10 Executing start method ("/lib/svc/method/fs-local") ]
    bootadm: this operation is not supported on sparc
    [ Aug 23 09:49:11 Method "start" exited with status 0 ]
    [ Aug 23 09:49:23 Stopping because service disabled. ]
    [ Aug 23 09:49:23 Executing stop method (null) ]
    [ Aug 23 10:04:13 Enabled. ]
    [ Aug 23 10:04:20 Executing start method ("/lib/svc/method/fs-local") ]
    bootadm: this operation is not supported on sparc
    [ Aug 23 10:04:20 Method "start" exited with status 0 ]
    [ Aug 23 10:06:57 Enabled. ]
    [ Aug 23 10:07:04 Executing start method ("/lib/svc/method/fs-local") ]
    bootadm: this operation is not supported on sparc
    [ Aug 23 10:07:05 Method "start" exited with status 0 ]
    [ Oct 23 08:43:05 Enabled. ]
    [ Oct 23 08:43:14 Executing start method ("/lib/svc/method/fs-local") ]
    bootadm: this operation is not supported on sparc
    [ Oct 23 08:43:14 Method "start" exited with status 0 ]
    [ Nov 21 14:51:50 Enabled. ]
    [ Nov 21 14:51:58 Executing start method ("/lib/svc/method/fs-local") ]
    bootadm: this operation is not supported on sparc
    [ Nov 21 14:51:59 Method "start" exited with status 0 ]
    [ Nov 29 15:33:19 Enabled. ]
    [ Nov 29 15:33:26 Executing start method ("/lib/svc/method/fs-local") ]
    bootadm: this operation is not supported on sparc
    [ Nov 29 15:33:27 Method "start" exited with status 0 ]
    [ Dec 18 13:37:35 Enabled. ]
    [ Dec 18 13:37:42 Executing start method ("/lib/svc/method/fs-local") ]
    bootadm: this operation is not supported on sparc
    [ Dec 18 13:37:42 Method "start" exited with status 0 ]
    [ Dec 19 08:48:07 Enabled. ]
    [ Dec 19 08:48:14 Executing start method ("/lib/svc/method/fs-local") ]
    bootadm: this operation is not supported on sparc
    [ Dec 19 08:48:14 Method "start" exited with status 0 ]
    [ Dec 19 08:56:07 Enabled. ]
    [ Dec 19 08:56:14 Executing start method ("/lib/svc/method/fs-local") ]
    bootadm: this operation is not supported on sparc
    [ Dec 19 08:56:14 Method "start" exited with status 0 ]
    [ Dec 19 08:57:41 Enabled. ]
    [ Dec 19 08:57:48 Executing start method ("/lib/svc/method/fs-local") ]
    bootadm: this operation is not supported on sparc
    [ Dec 19 08:57:48 Method "start" exited with status 0 ]
    [ Feb  1 10:39:48 Enabled. ]
    [ Feb  1 10:39:55 Executing start method ("/lib/svc/method/fs-local") ]
    bootadm: this operation is not supported on sparc
    [ Feb  1 10:39:56 Method "start" exited with status 0 ]
    [ Feb  8 11:12:50 Enabled. ]
    [ Feb  8 11:12:57 Executing start method ("/lib/svc/method/fs-local") ]
    bootadm: this operation is not supported on sparc
    [ Feb  8 11:12:57 Method "start" exited with status 0 ]
    [ Jun  6 10:08:34 Enabled. ]
    [ Jun  6 10:08:44 Executing start method ("/lib/svc/method/fs-local") ]
    bootadm: this operation is not supported on sparc
    [ Jun  6 10:08:46 Method "start" exited with status 0 ]
    [ Aug  8 09:45:48 Enabled. ]
    [ Aug  8 09:46:35 Executing start method ("/lib/svc/method/fs-local") ]
    bootadm: this operation is not supported on sparc
    [ Aug  8 09:46:36 Method "start" exited with status 0 ]
    [ Aug 14 17:53:59 Enabled. ]
    [ Aug 14 17:54:06 Executing start method ("/lib/svc/method/fs-local") ]
    bootadm: this operation is not supported on sparc
    [ Aug 14 17:54:06 Method "start" exited with status 0 ]
    [ Aug 14 17:55:20 Enabled. ]
    [ Aug 14 17:55:27 Executing start method ("/lib/svc/method/fs-local") ]
    bootadm: this operation is not supported on sparc
    [ Aug 14 17:55:27 Method "start" exited with status 0 ]
    [ Aug 18 15:19:17 Enabled. ]
    [ Aug 18 15:19:24 Executing start method ("/lib/svc/method/fs-local") ]
    bootadm: this operation is not supported on sparc
    [ Aug 18 15:19:24 Method "start" exited with status 0 ]
    [ Aug 29 12:56:48 Enabled. ]
    [ Aug 29 12:56:55 Executing start method ("/lib/svc/method/fs-local") ]
    bootadm: this operation is not supported on sparc
    [ Aug 29 12:56:55 Method "start" exited with status 0 ]
    [ Oct 13 11:59:43 Enabled. ]
    [ Oct 13 11:59:50 Executing start method ("/lib/svc/method/fs-local") ]
    bootadm: this operation is not supported on sparc
    [ Oct 13 11:59:51 Method "start" exited with status 0 ]
    [ Feb 26 16:47:00 Enabled. ]
    [ Feb 26 16:47:07 Executing start method ("/lib/svc/method/fs-local") ]
    bootadm: this operation is not supported on sparc
    [ Feb 26 16:47:07 Method "start" exited with status 0 ]
    [ Apr 14 15:54:17 Enabled. ]
    [ Apr 14 15:54:24 Executing start method ("/lib/svc/method/fs-local") ]
    bootadm: this operation is not supported on sparc
    [ Apr 14 15:54:25 Method "start" exited with status 0 ]
    [ Aug 28 08:49:58 Stopping because service disabled. ]
    [ Aug 28 08:49:58 Executing stop method (null) ]
    [ Aug 28 08:52:54 Enabled. ]
    [ Aug 28 08:53:01 Executing start method ("/lib/svc/method/fs-local") ]
    bootadm: this operation is not supported on sparc
    [ Aug 28 08:53:01 Method "start" exited with status 0 ]
    [ Aug 28 09:08:20 Stopping because service disabled. ]
    [ Aug 28 09:08:20 Executing stop method (null) ]
    [ Sep  1 16:05:36 Enabled. ]
    [ Sep  1 16:06:05 Executing start method ("/lib/svc/method/fs-local") ]
    [ Sep  1 16:06:05 Method "start" exited with status 0 ]
    [ Sep  1 19:29:19 Enabled. ]
    [ Sep  1 19:29:27 Executing start method ("/lib/svc/method/fs-local") ]
    [ Sep  1 19:29:27 Method "start" exited with status 0 ]
    [ Sep  1 23:04:00 Enabled. ]
    [ Sep  1 23:04:08 Executing start method ("/lib/svc/method/fs-local") ]
    [ Sep  1 23:04:08 Method "start" exited with status 0 ]
    [ Sep  2 00:23:41 Stopping because service disabled. ]
    [ Sep  2 00:23:42 Executing stop method (null) ]
    [ Sep  2 00:46:46 Enabled. ]
    [ Sep  2 00:46:53 Executing start method ("/lib/svc/method/fs-local") ]
    [ Sep  2 00:46:54 Method "start" exited with status 0 ]
    [ Sep 26 12:04:34 Enabled. ]
    [ Sep 26 12:04:41 Executing start method ("/lib/svc/method/fs-local") ]
    [ Sep 26 12:04:42 Method "start" exited with status 0 ]
    [ Oct 20 13:05:09 Stopping because service disabled. ]
    [ Oct 20 13:05:10 Executing stop method (null) ]
    [ Oct 20 13:24:01 Enabled. ]
    [ Oct 20 13:24:08 Executing start method ("/lib/svc/method/fs-local") ]
    [ Oct 20 13:24:09 Method "start" exited with status 0 ]
    [ Oct 21 16:30:59 Enabled. ]
    [ Oct 21 16:31:09 Executing start method ("/lib/svc/method/fs-local") ]
    [ Oct 21 16:31:09 Method "start" exited with status 0 ]
    [ Oct 21 16:32:42 Stopping because service disabled. ]
    [ Oct 21 16:32:42 Executing stop method (null) ]
    [ Oct 21 16:42:05 Enabled. ]
    [ Oct 21 16:42:15 Executing start method ("/lib/svc/method/fs-local") ]
    [ Oct 21 16:42:15 Method "start" exited with status 0 ]
    [ Oct 21 17:27:37 Enabled. ]
    [ Oct 21 17:27:47 Executing start method ("/lib/svc/method/fs-local") ]
    [ Oct 21 17:27:47 Method "start" exited with status 0 ]
    [ Oct 22 11:08:34 Enabled. ]
    [ Oct 22 11:08:43 Executing start method ("/lib/svc/method/fs-local") ]
    [ Oct 22 11:08:43 Method "start" exited with status 0 ]
    [ Dec  9 09:17:33 Stopping because service disabled. ]
    [ Dec  9 09:17:33 Executing stop method (null) ]
    [ Dec 10 11:47:14 Enabled. ]
    [ Dec 10 11:47:24 Executing start method ("/lib/svc/method/fs-local") ]
    [ Dec 10 11:47:25 Method "start" exited with status 0 ]
    [ Dec 15 10:52:25 Stopping because service disabled. ]
    [ Dec 15 10:52:25 Executing stop method (null) ]
    [ Dec 15 12:42:16 Enabled. ]
    [ Dec 15 12:42:26 Executing start method ("/lib/svc/method/fs-local") ]
    Abort - core dumped
    WARNING: /usr/sbin/zfs mount -a failed: exit status 134
    [ Dec 15 12:42:28 Method "start" exited with status 95 ]
    [ Dec 15 13:13:19 Enabled. ]
    [ Dec 15 13:13:28 Executing start method ("/lib/svc/method/fs-local") ]
    Abort - core dumped
    WARNING: /usr/sbin/zfs mount -a failed: exit status 134
    [ Dec 15 13:13:30 Method "start" exited with status 95 ]
    [ Dec 15 13:58:51 Enabled. ]
    [ Dec 15 13:59:00 Executing start method ("/lib/svc/method/fs-local") ]
    Abort - core dumped
    WARNING: /usr/sbin/zfs mount -a failed: exit status 134
    [ Dec 15 13:59:03 Method "start" exited with status 95 ]
    [ Dec 15 15:34:41 Leaving maintenance because clear requested. ]
    [ Dec 15 15:34:41 Enabled. ]
    [ Dec 15 15:34:41 Executing start method ("/lib/svc/method/fs-local") ]
    Abort - core dumped
    WARNING: /usr/sbin/zfs mount -a failed: exit status 134
    [ Dec 15 15:34:43 Method "start" exited with status 95 ]
    bash-3.00# /usr/sbin/zfs mount -a
    internal error: Unknown error
    Abort (core dumped)
    Before that I've installed the patch cluster with halted solaris zones which produced following output:
    Application of patches finished : 2010.12.15 12:08:43
    Following patches were applied :
    119254-77 119812-10 125719-31 140159-03 142911-01
    141588-04 119900-11 125731-05 142292-01 142933-02
    142251-02 119906-16 126206-05 141444-09 142909-17
    118666-28 120460-17 126363-08 141500-07 143140-04
    118667-28 121012-03 126365-16 141502-02 143502-01
    118777-16 121308-20 126868-04 141506-09 143506-01
    140860-02 122212-40 127724-02 141514-02 143615-02
    119059-56 122261-03 136998-09 141518-12 143731-01
    119213-23 122675-05 137000-07 141552-03 143733-01
    124628-10 123003-04 137080-05 141558-01 143977-01
    119252-29 123590-12 137147-06 141586-01 144053-04
    119280-23 123893-22 138195-04 141590-02 144106-01
    124188-03 124393-11 138822-07 141874-09 144254-01
    120199-15 124457-02 138826-07 141876-07 144488-04
    119534-19 124630-42 138880-02 142084-04 144492-01
    120272-28 125215-03 139099-04 142397-01 145124-01
    119757-18 125388-03 139620-01 142529-01 145796-01
    119783-15 125555-07
    Following patches were skipped :
    Patches already applied
    120900-04 119063-01 119810-05 123005-07 137093-01
    121133-02 119081-25 119986-03 124444-01 138866-03
    119317-01 119130-33 120061-02 124939-03 137137-09
    121296-01 123611-04 120201-05 124943-01 137871-02
    138215-01 140899-01 120292-02 124997-01 138181-01
    127884-01 122640-05 120329-02 125279-05 138361-01
    118712-23 126897-02 121975-01 125539-06 138373-02
    118918-24 127755-01 120719-02 125891-01 138647-01
    138217-01 125503-02 120830-06 126440-01 141016-01
    119578-30 125547-02 121095-02 126540-02 139555-08
    121453-02 140796-01 121606-04 127127-11 139967-01
    121453-02 120011-14 124171-07 136882-02 140455-01
    121118-16 139520-02 123630-03 137032-01 140563-01
    118833-36 119764-06
    Patches obsoleted by one or more patches already applied
    118731-01 124204-04 122660-10
    Patches not applicable to packages on the system
    121181-03 120410-33 121211-02 125533-15 143317-03
    119115-35 120412-11 122259-03 125541-06 143510-01
    119117-52 120414-27 122470-03 125952-20 143725-01
    119315-19 120543-21 122911-24 137004-08 143727-01
    119548-14 120739-06 122958-06 138387-01 143739-01
    119903-02 120811-09 123938-02 138824-07 144325-01
    120094-30 120849-04 125136-24 138876-01 145006-02
    120185-21 121104-11 125137-24 139986-01 145080-01
    119368-04 121136-02 125332-14 142244-02 145200-01
    120286-03
    Installation of patch set complete. PLEASE REBOOT THE SYSTEM.
    when i tried to reboot the system by init 6 the service iscsi hanged and produced syslog errors about a unkown iocall -> killed the process. System rebooted w/o errors.
    Does anyone have got an idea how to find out which patch or whatever do produce these errors?

    Hi,
    I'm having the same issue of diskmon core dumps after upgrading grid and database from 11.2.0.1 to 11.2.0.2 on Solaris 10 x86-64. Following this thread, I'm trying to deinstall the Oracle 11.2.0.1 grid home.
    I answered the following questions asked by the grid deinstall tool:
    1. ASM configuration was not detected in this Oracle home. Was ASM configured in this Oracle home (y|n): y
    2. Specify the ASM Diagnostic Destination: /db01/app/oracle/diag/asm/+ASM
    3. Specify the diskgroups that are managed by this ASM instance: DATA FRA
    4. De-configuring ASM will drop all the diskgroups at cleanup time. Do you want deconfig tool to drop the diskgroups:
    If I answer no to question 1, the tool exits with error.
    How do I answer question #4? (confused about this question of dropping diskgroups, it's already been upgraded)
    Deinstall of Oracle db Home 11.2.0.1 was successful.
    The +ASM instance has been upgraded and is running fine under 11.2.0.2 except for the excessive diskmon core dumps.
    Thanks,
    Lisa
    Edited by: user12018917 on Apr 19, 2011 10:21 AM

  • Java installation problem on solaris

    Hi
    IAm a new born baby to solaris .I have installed
    java on solaris sparc machine 2.7 by using Solaris_JDK_1.2.2_sparc.bin.
    If i have done anything wrong ,Please correct me .My problem is :
    i have to include the rt.jar file in the classpath bcoz it contains all
    the class files .Then iam running command javac Test.java .Then i got error
    message as segmentation violation error and abort core dumped .I dont why i got this error .Please help me as soon possible .My email id is
    [email protected] .
    Thanks in advance
    bala

    The Solaris*.bin file should have unpacked everything and installed all the JDK in a directory off of the directory where you ran the .bin file. Inside this subdirectory will be a bin subdirectory where the java executables, etc are installed.

  • BI Java Installation: Clarification Needed!

    I'm wondering if someone could help clear this up for me:
    We have installed NW2004s SPS08 on Solaris with only the usage type EP (AS Java/EP). Awhile back I was tasked with connecting our BW ABAP system to our Portal ("Integration into the Portal" - transaction SPRO etc).
    After starting this task I noticed I was missing things that the instructions were telling me to configure; i.e. Items that were related to BI that weren't in the Portal such as certain roles, the BI Repository Manager etc.
    Reading around, it seemed like I need to install the BI usage type.
    I have now been tasked with another installation of the Portal (NW2004s SR1 this time), but am trying to head off the problems I'm experiencing trying to connect the Portal to our BW ABAP system. This will be a Java only installation. I've read that BI-Java requires EP and AS Java, and that if I install the BI-Java usage type, EP and AS-Java will be installed automatically.
    My question is, if I do the BI-Java installation and it automatically installs EP/AS-Java, will the Portal still act the same way as it does in my EP/AS-Java only installation I already have? We have many plans to use the Portal as an entry point for all of our backend systems, so if the Portal's capabilities are not what we see already (in our first installation of just EP/AS-Java) then we will have problems.
    Any clarification is greatly appreciated and I will award points accordingly.
    THANKS!
    Beau.

    I think that's what I needed to know.
    I was actually wondering about DI as well. Our developers are having problems deploying .EAR files to our original EP-only install. They can deploy .PAR files with no problems, but .EAR files always error out. Maybe having DI will solve this problem as well? I'm a little concerned about the hardware capacity of this box with having BI, EP and DI all installed on it. I had contacted SAP about installing DI a while back and basically they had told me to install it on a seperate server, by itself. We're running a Sun Enterprise 420R, 4G of memory and a 450 mhz processor for this new installation. Do you think this box is capable of handle EP, BI and DI (AS-JAVA)?
    Thanks for your help!

  • Java on Solaris 10

    Dear All,
    I need some guidance on Java version compatibility and configuration with Solaris 10. We are having SunOS 5.10 Generic_144488-17, but in the DSEE installation we have used JES 5 which have built in problems, which actually de graded system cacao services and libraries. Later we resolved this issue by applying patch and upgraded the cacao. Here the question is, now i need to verify the Java on the system is reliable and accurate. Could you provide me some link, where I could understand the Java and Solaris.
    Below is the Java information which am able to pull from the server.
    bash-3.00# java -version
    java version "1.5.0_30"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_30-b03)
    Java HotSpot(TM) Server VM (build 1.5.0_30-b03, mixed mode)
    bash-3.00# uname -a
    SunOS ssino07 5.10 Generic_144488-17 sun4v sparc SUNW,SPARC-Enterprise-T5220
    bash-3.00# showrev
    Hostname: sxxx
    Hostid: 85594e34
    Release: 5.10
    Kernel architecture: sun4v
    Application architecture: sparc
    Hardware provider: Sun_Microsystems
    Domain:
    Kernel version: SunOS 5.10 Generic_144488-17
    Also would like to share one error, which actually made to open this thread on Solaris Form. Its related to DSEE installation [already opened a thread there], when we copying the one LDAP configuration settings from one server to another server, we got a schema error. Could you guide me specific to Java here.
    Failed: Error updating the server xxxx:389. The error is javax.naming.NameAlreadyBoundException: mgrpRFC822MailMember"
    Many thanks in advance,

    Your default system java doesn't matter, ie Solaris has a version of java linked to /usr/bin/java which may link to the same version that DSEE is using or not, ie you can have multiple versions of java on your system. DSEE and the rest of the JES products have their own Java installation linked to a location under /usr/jdk/entsys-j2se
    As for your second question, if the schema is different between two servers, then migrating data between them will give you schema violations. In your specific case, have you ever installed any versions of the JES Messaging Server? Some older versions had a conflicting OID in the schema. A quick fix would be just copy the S99user.ldif from the working server to the other server.

  • How to open a web page in java in Solaris system

    i can do this in windows:
    String location = "www.sun.com";
    Runtime.getRuntime().exec("explorer " + location);how could i get it in solaris?
    Thanks

    Isn't this question completely outside the scope of this forum ?
    ... this is a forum for Solaris Zones, not Java or software development.
    http://forum.java.sun.com/thread.jspa?threadID=5075398
    Perhaps your query would be more appropriate in one of these other areas of discussion:
    http://forum.java.sun.com/index.jspa?tab=java

  • OSB and Solaris Zones

    Hi,
    Does anybody have any experience of running OSB inside a Solaris zone?
    I'm experimenting with this at the moment and would like to share the OSB installation with the global zone, but keep the /usr/etc and /usr/tmp directories where the host-specific stuff is stored private.
    Thanks.

    I following Oracle® Secure Backup Installation and Configuration Guide
    Release 10.3 :
    - To Viewing SCSI Bus Name-Instance Parameter Values in Solaris :
    # cd /usr/local/oracle/backup/install
    # installdriver
    bash: installdriver: command not found
    # ./installdriver
    case: Too many arguments
    How could i can run the installdriver script for SCSI information
    Best Regards
    Ch

  • BI Java Installation Error

    Hi,all:
    I did the installation of BI Java Installation yesterday,but it terminated during process"SAP J2EE Engine Online Deployment". It informs "MUT-02041 SDM call of deploySdaList ends with returncode 4". I check the callSdmViaSapinst.log, below is the error information:
    05/11/20 22:49:59 -  ***********************************************************
    05/11/20 22:50:01 -  Start updating EAR file...
    05/11/20 22:50:01 -  start-up mode is lazy
    05/11/20 22:50:01 -  EAR file updated successfully for 137ms.
    05/11/20 22:50:01 -  Start deploying ...
    05/11/20 22:50:02 -  EAR file uploaded to server for 385ms.
    05/11/20 22:50:02 -  ERROR: Not deployed. Deploy Service returned ERROR:
                         java.rmi.RemoteException: Error occurred while deploying ear file ./temp/deploy/work/deplo
    ying/bi_mmr_bi_4.0.ear.
                         Reason: None of the available containers recognized the components of application sap.com/
    bimmrbi_4.0; it is not possible to make deploy.
                            at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.jav
    a:480)
                            at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServic
    eImplp4_Skel.java:1555)
                            at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:291)
                            at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:183)
                            at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.
    java:119)
                            at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageList
    ener.process(ApplicationSessionMessageListener.java:37)
                            at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(Unorder
    edChannel.java:71)
                            at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
                            at java.security.AccessController.doPrivileged(Native Method)
                            at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
                            at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
                         For detailed information see the log file of the Deploy Service.
    05/11/20 22:50:02 -  ***********************************************************
    Nov 20, 2005 10:50:02... Info: End of log messages of the target system.
    Nov 20, 2005 10:50:02... Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
    Nov 20, 2005 10:50:02... Error: Aborted: development component 'bi/mmr/bi_4.0'/'sap.com'/'SAP AG'/'350.6918.000
    Caught exception during application deployment from SAP J2EE Engine's deploy service:
    java.rmi.RemoteException: Error occurred while deploying ear file ./temp/deploy/work/deploying/bi_mmr_bi_4.0.ea
    r.
    Reason: None of the available containers recognized the components of application sap.com/bimmrbi_4.0; it is
    not possible to make deploy.
    (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(Deployme
    ntActionTypes).REMEXC)
    Nov 20, 2005 10:50:02... Info: SDM configuration: Do not automatically start/stop J2EE Engine. Do not restore s
    tate of J2EE Engine now.
    Nov 20, 2005 10:50:02... Info: -
    Deployment was successful -
    Nov 20, 2005 10:50:03... Info: Summarizing the deployment results:
    Nov 20, 2005 10:50:03... Error: Admitted: /Inst_CDs/BW/BW-UDI/ONLINE/BIUDI09_0.sca
    Nov 20, 2005 10:50:03... Error: Processing error. Return code: 4
    My platform is SUSE Linux Enterprise Server 9. I do the installation on a NetWeaver ABAP+Java 640 system. Also I have installed BI content 3.53.
    Please help me.
    Thanks,
    Daniel

    I am having the same problem.
    Can anyone help on this topic please?

  • Java installer does not open browser the right way

    Windows 7 SP1 x64
    Hi,
    since no direct feedback to Oracle is possible (feedback form does not work), I'm using this forum for feedback. The feedback is meant for Oracle but I appreciate any input from the community.
    At the end of the installation process the Java installer opens the default browser and navigates to a Java/Oracle website. The call is not made using the default way by invoking the standard browser. However the installer seems to open the main exe of the default browser by circumventing standard procedures.
    Example: My default browser is Chrome. Registry settings are set in a way that the browser is opened with specific path variables like a non-default cache path and size and some other variables. Everything works fine and all calls to display any URL are made using the registry settings provided. If I open any URL the browser will open using the specified variables. The same is true for any program that tries to open an URL. The only exception is - of course - Java. The installer opens Chrome directly by circumventing the default settings thus resulting in Chrome opening up with completely different settings.
    Let me tell you how deeply dissatisfied I am with such a behavior. Programs should invoke browsers using standard system calls. If Java had done this Chrome would have opened with default settings.

    please?
    It is a big problem, because also the search does not work propperly.....

  • Referencing Java Installation Path

    We have an java application which apparently contains hard coded references to the java installation directory. I.E. (C:\program files\Java\jre1.4.2_04)
    The problem is that this means we have to have the same version of java across all our servers for the software to work. What we have traditionally done is load the latest version of java on every new server we deploy (then maintain incremental upgrades afterwards). The theory being that we wanted to be on the latest version which is least vulnerable to security issues. Of course the problem with that is that the latest version of java is always different.
    So my question is - is there no way to dynamically reference the latest java installation directory. I'm not a java programmer but I'm having a difficult time believing there isn't some environment or system variable that contains this path vs hard coding it?
    Also maybe this is better aimed at another group but, if java has been upgraded - why are the previous versions left behind? I just noticed in my program files directory I have 11 different versions of java installed. Whats the point and isn't that a security risk? I.E. Say there was x security issue with java 1.4.2 build 1, so build 2 was released. We upgraded to build 2 but build 1 is left behind.... can you see where this is going?
    Thanks
    Brad

    I just got clarification. Apparently our devs are calling the Java application from an ASP/ASP.net page. Excerpt below:
    Dim a_jvmargs(1)
    a_jvmargs(0)= "-Djava.class.path=C:\Program Files\Java\j2re1.4.2_04\lib\rt.jar;" &_
    "C:\jar1.jar;" &_
    "C:\jar2.jar;" &_
    "C:\jar3.jar;" &_
    "C:\jar4.jar"
    set objJVM = Server.CreateObject("comJava.comJavaJvm")
    objJVM.setVMArguments(a_jvmargs)
    objJVM.setJavaVMLibraryPath("C:\Program Files\Java\j2re1.4.2_04\bin\client\jvm.dll")
    objJVM.CreateJavaVM()
    Maybe this is more of an ASP/Microsoft question now. None the less do you have any recommendations about how we might avoid directly hard coding the path?
    Thanks Again,
    Brad

  • EP6,SP3 WAS640 Java Installation in a distributed environment....

    Hi Freinds,
    While installing WAS Java 640 instance in a distributed environment (with oracle 9.2 DB instance in separate host & WAS640 on another), the installation setup stops at the last step (i.e. during registration of SDM of SCS/CI installation). Kindly suggest, what cud be the problem?
    The details of errors are as mentioned below:
    ERROR 2004-10-09 15:04:05
    MUT-02041   SDM call of deploySdaList ends with returncode 4. See output of logfile C:\Program Files\sapinst_instdir\WEBAS_640_J2EE_ONLY\DS\CI\callSdmViaSapinst.log.
    The details of CallsdmViaSAPinst.log is as follows:
    Oct 9, 2004 2:13:26 PM   Info:
    Oct 9, 2004 2:13:26 PM   Info: ============================================
    Oct 9, 2004 2:13:26 PM   Info: =   Starting to execute command 'deploy'   =
    Oct 9, 2004 2:13:26 PM   Info: ============================================
    Oct 9, 2004 2:13:26 PM   Info: Starting SDM - Software Deployment Manager...
    Oct 9, 2004 2:13:32 PM   Info: tc/SL/SDM/SDM/sap.com/SAP AG/6.3003.00.0000.20031126161800.0000
    Oct 9, 2004 2:13:33 PM   Info: SDM operation mode successfully set to: Standalone
    Oct 9, 2004 2:13:35 PM   Info: Initializing Network Manager (50317)
    Oct 9, 2004 2:13:35 PM   Info: Checking if another SDM is running on port 50318
    Oct 9, 2004 2:13:35 PM   Info: -
    Starting deployment -
    Oct 9, 2004 2:13:35 PM   Info: Loading selected archives...
    Oct 9, 2004 2:13:36 PM   Info: Loading archive 'I:\CD\51030277_WAS640SP3_Installation\J2EE1\J2EE-ENG\JDD\SYNCLOG.SDA'
    Oct 9, 2004 2:13:36 PM   Info: Selected archives successfully loaded.
    Oct 9, 2004 2:13:36 PM   Info: Error handling strategy: OnErrorStop
    Oct 9, 2004 2:13:36 PM   Info: Update strategy: UpdateLowerVersions
    Oct 9, 2004 2:13:36 PM   Info: Starting to execute deployment action (deploy) for "synclog".
    Oct 9, 2004 2:13:44 PM   Info: Creating connections to database "EPQ".
    Oct 9, 2004 2:13:55 PM   Info: Creating vendor connection to database.
    Oct 9, 2004 2:13:57 PM   Error: Creation of vendor connection failed.
    Original error message is:
    java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
    Stack trace of original Exception or Error is:
    java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
         at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
         at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)
         at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:334)
         at oracle.jdbc.ttc7.TTC7Protocol.handleIOException(TTC7Protocol.java:3695)
         at oracle.jdbc.ttc7.TTC7Protocol.logon(TTC7Protocol.java:352)
         at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:362)
         at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:536)
         at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:328)
         at com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection(NativeConnectionFactory.java:149)
         at com.sap.sql.connect.OpenSQLDataSourceImpl.createConnection(OpenSQLDataSourceImpl.java:472)
         at com.sap.sql.connect.OpenSQLDataSourceImpl.getConnection(OpenSQLDataSourceImpl.java:253)
         at com.sap.sdm.serverext.servertype.dbsc.extern.DBSCConnectionManager.createSDMVendorConnection(DBSCConnectionManager.java:214)
         at com.sap.sdm.serverext.servertype.dbsc.extern.DBSCConnectionManager.createSDMConnections(DBSCConnectionManager.java:77)
         at com.sap.sdm.serverext.servertype.dbsc.ConnectionManagerDecorator.createSDMConnections(ConnectionManagerDecorator.java:73)
         at com.sap.sdm.serverext.servertype.dbsc.DatabaseTargetSystem.connect(DatabaseTargetSystem.java:140)
         at com.sap.sdm.serverext.servertype.dbsc.DBSCDeploymentActionProcessor.executeAction(DBSCDeploymentActionProcessor.java:115)
         at com.sap.sdm.app.proc.deployment.impl.PhysicalDeploymentActionExecutor.execute(PhysicalDeploymentActionExecutor.java:58)
         at com.sap.sdm.app.proc.deployment.impl.DeploymentActionImpl.execute(DeploymentActionImpl.java:181)
         at com.sap.sdm.app.proc.deployment.controllers.internal.impl.DeploymentExecutorImpl.execute(DeploymentExecutorImpl.java:51)
         at com.sap.sdm.app.proc.deployment.states.eventhandler.ExecuteDeploymentHandler.executeAction(ExecuteDeploymentHandler.java:84)
         at com.sap.sdm.app.proc.deployment.states.eventhandler.ExecuteDeploymentHandler.handleEvent(ExecuteDeploymentHandler.java:61)
         at com.sap.sdm.app.proc.deployment.states.StateBeforeNextDeployment.processEvent(StateBeforeNextDeployment.java:78)
         at com.sap.sdm.app.proc.deployment.states.InstContext.processEventServerSide(InstContext.java:88)
         at com.sap.sdm.app.proc.deployment.states.InstContext.processEvent(InstContext.java:74)
         at com.sap.sdm.app.sequential.deployment.impl.DeployerImpl.doPhysicalDeployment(DeployerImpl.java:121)
         at com.sap.sdm.app.sequential.deployment.impl.DeployerImpl.deploy(DeployerImpl.java:90)
         at com.sap.sdm.control.command.cmds.Deploy.execute(Deploy.java:162)
         at com.sap.sdm.control.command.decorator.AssureStandaloneMode.execute(AssureStandaloneMode.java:54)
         at com.sap.sdm.control.command.decorator.AssureOneRunningSDMOnly.execute(AssureOneRunningSDMOnly.java:61)
         at com.sap.sdm.control.command.decorator.SDMInitializer.execute(SDMInitializer.java:52)
         at com.sap.sdm.control.command.decorator.GlobalParamEvaluator.execute(GlobalParamEvaluator.java:60)
         at com.sap.sdm.control.command.decorator.AbstractLibDirSetter.execute(AbstractLibDirSetter.java:46)
         at com.sap.sdm.control.command.decorator.ExitPostProcessor.execute(ExitPostProcessor.java:48)
         at com.sap.sdm.control.command.decorator.CommandNameLogger.execute(CommandNameLogger.java:49)
         at com.sap.sdm.control.command.decorator.AdditionalLogFileSetter.execute(AdditionalLogFileSetter.java:65)
         at com.sap.sdm.control.command.decorator.AbstractLogDirSetter.execute(AbstractLogDirSetter.java:52)
         at com.sap.sdm.control.command.Command.exec(Command.java:42)
         at SDM.main(SDM.java:21)
    Oct 9, 2004 2:13:57 PM   Error: Execution of deployment action for "synclog" aborted:
    Db connect failed.
    Oct 9, 2004 2:13:57 PM   Error: Deployment NOT successful for synclog
    Oct 9, 2004 2:13:57 PM   Error: -
    At least one of the Deployments failed -
    Oct 9, 2004 2:13:57 PM   Info: Summarizing the deployment results:
    Oct 9, 2004 2:13:57 PM   Error: Aborted: I:\CD\51030277_WAS640SP3_Installation\J2EE1\J2EE-ENG\JDD\SYNCLOG.SDA
    Oct 9, 2004 2:13:57 PM   Error: Processing error. Return code: 4

    Hi Rajenda,
    I'm really stucked in distributed Java installation.
    Can you help me? I'd like to ask you some questions.
    My email address is: [email protected]
    Regards,
    Tibor
    ps.: I'm using my friend account in SAP SDN (Nándor)

  • Oracle licensing in Solaris zones

    Hi all,
    I've read a few documents about Oracle licensing :
    http://www.sun.com/third-party/global/oracle/consolidation/Containers_Oracle_041305.pdf
    http://www.oracle.com/corporate/pricing/partitioning.pdf
    However, there's one thing not clear to me. In Solaris zones, you dedicate threads (usually referred to as 'CPU' on Solaris) to zones. Oracle licensing is always about the number of cores used by the partition, not the number of threads. How do you convert from threads to cores?
    I'll give an example:
    A T2 system with 2 processors, 8 cores each, 8 threads each (128 threads in total). You create a resource pool with 2 CPUs (threads): 1 thread from one core, and 1 thread from another one (or they are assigned like that for you) and associate a zone that runs Oracle.
    I can think of two ways of calculating the number of cores used:
    1) divide the number of dedicated threads by the number of threads per core: 2 / 8 = 0.25 (optionally round it up to 1) -- This is how IBM does its licensing.
    2) count the number of physical cores that are being used by the zone. In this case this is 2, as the threads are not running on the same core.
    Can anyone help me figuring this out?
    Thanks!
    Regards,
    Mathieu

    Hi Dezutterm,
    I'm not a sales guy, but from how I understand things... you've already figured it out yourself:
    dezutterm wrote:
    I'll give an example:
    A T2 system with 2 processors, 8 cores each, 8 threads each (128 threads in total). You create a resource pool with 2 CPUs (threads): 1 thread from one core, and 1 thread from another one (or they are assigned like that for you) and associate a zone that runs Oracle.
    I can think of two ways of calculating the number of cores used:
    1) divide the number of dedicated threads by the number of threads per core: 2 / 8 = 0.25 (optionally round it up to 1) -- This is how IBM does its licensing.
    2) count the number of physical cores that are being used by the zone. In this case this is 2, as the threads are not running on the same core.
    Can anyone help me figuring this out?Like you've seen, Oracle cares about how many cores are running Oracle software, not threads (from "Processor" definition here: http://www.oracle.com/corporate/pricing/technology-price-list.pdf). If you have 2 cores running Oracle software, you take "2" and multiple by the Core Processor Licensing Factor for that model of CPU (http://www.oracle.com/corporate/contracts/library/processor-core-factor-table.pdf) which for a T2 is 0.25... meaning you need 2 x 0.25 = 0.5 processor licenses. If you would have used both threads from the same core, you would need 0.25.
    If this isn't correct, somebody please let us know, thanks!
    [email protected]

  • Can EM12c Cloud Control agent be installed in a solaris zone?

    Can EM12c Cloud Control agent be installed in a solaris zone?
    If so, are Solaris 8 and Solaris 9 zones supported?
    thanks

    Yes we can...
    Solaris 9 is supported...I have installed agents on solaris 9 and 10

Maybe you are looking for

  • Firefox and Google Chrome problem

    I updated plugins in Firefox - including Shockwave and now my Google Chrome browser crashes as soon as I open it. I uninstalled and reinstalled Chrome, but it still won't work. For a split second when I try to open Chrome I get an error that says som

  • Safari appends .dot to all .doc files after Word 2008

    I am having a weird problem with Safari which may be caused by incompatibilities with Office 2008. Since upgrading to Office 2008 (and also trashing my entire system then installing Office 2008 for scratch), Safari is having this nasty habit of appen

  • How to update my ipod to ios 5

    i have an ipod 3rd generation and i was to update the software from a 4.3.5 to 5.0 how would i go about doing so?

  • ADS+Terminal Services on a Single Physical Server running Windows Server 2008 R2

    We have a Dual Processor Server (2 x Intel Xeon E5-2620v2 + 32GB RAM) running on Windows Server 2008 R2. This has ADS configured. We now wish to add a VDI Setup with NComputing Zero-Clients. We have to run Terminal Services with User RDS CAL + User C

  • Camera Raw 5.0 and Apple iPhoto

    I have an issue opening raw photos saved in iPhoto... I have upgraded to Photoshop CS4 and now I can not drag my RAW photos (taken with a Canon Rebel XTi) to PS CS4 and have them open in camera raw. This worked perfect with PS CS3. If I use the OPEN