Java pages w/ code behind

I want to create a web page that contains Java code. How can I do this?
E.G. For anyone who's done .NET I'm looking for the Java equivalent of creating an asp page w/ C# code behind.

JSP = Java server page

Similar Messages

Custom Master Page with Code behind in SharePoint 2013

Hi All,
I want to create the Custom Master Page in Sharepoint 2013 with Code file in it.
Is it possible to create? if YES the how i can achieve it??
PD

To add something to Amit's reply, you can refer to the following link on how to create master page with code behind if you are new to ASP.net.
Walkthrough: Creating and Using ASP.NET Master Pages in Visual Web Developer
http://msdn.microsoft.com/en-us/library/ehszf8ax(v=vs.90).aspx
Miles LI TechNet Community Support

Customize Access Requried page with code behind attached to it in sharepoint 2010

Hi,
I have modified default AccessDenied page to my custom accessdenied.aspx page and put Request Access button on it and javascript client side redirection to my requestaccess (reqestaccess.aspx, reqestaccess.aspx.cs) application page.
Here the problem is whenever i try to redirect to custom requesaccess page in _layouts it again shows me accessdenied page since user is not having access.
I changed requrestaccess to my custom requestaccess through Powershell command (UpdateMapping - 5). I can only modify the UI part of requestaccess.aspx and can not bind code behind where i want user to select combination of what access is required
on the site, there are lots of controls on requestaccess page e.g. dropdown that fetches data from list\external list and so on.
I tried many things to attach code behind to requestaccess page e.g. <%@ Page Inherits="codebehind.cs" /> and all.
Q - How can i redirect user to custom request access page (includes both aspx, aspx.cs) and allow user to interact with custom page? Is there any way OR WORKAROUND to do this in Sharepoint 2010?
OR
Can we overide with ElevetedPermissions in UI\CodeBehind and show the application page to user?
OR
Can user access application page even though they donot have rights to access site? Anything will do.
OR
In short, I need to redirect a user to some .aspx\.aspx.cs page from AccessDenied page, irrespective of user having access or not.
I hope question is clear enough to understand the issue. :)
Regards,
Rahul

Hi,
According to your post, my understanding is that you had an issue about the custom Access Required page.
Microsoft supported using code behind, but for these pages it seemed some difference.
However, as a workaround, we can put all the functionality to the aspx page directly.
http://umbraes-tower.blogspot.com/2011/10/custom-request-access-page-in.html
More reference:
http://onlinecoder.blogspot.com/2011/05/how-to-customize-requestaccess.html
http://oszakiewski.net/eric/customizing-the-access-request-page-in-sharepoint-2010
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Add code behind functionality that run when the user view the SP 2013 content pages

I need to add code behind functionality that run when the user view the SP 2013 content pages, What is the best approach to do that?
is it add Delegate Control to master page?
is it add code behind to master page?
is there an event reviver for that?
Your answer will be highly appreciated

Hi,
According to me, for code behind stuff
Create master page(using module etc..), have the required placeholders in it.
Then, create a page that inherit from this master page, now you can use that placeholder in you page.
Lastly, place web parts in that placeholder. So, code behind will come with that master page .
Hope it helps.
Thanks
-Rahul

How to find out the code behind a button

Hi,
What technique should I use to find out what java code is invoked when I click on a button in the portal?
More concrete: I want to know the code behind the button I'm talking about <a href="https://forums.sdn.sap.com/thread.jspa?threadID=188251">here</a>.
T h a n k s !
Jeroen

I would suggest you use HTTPWatch in your browser to see what is happening behind you button click.
You can get it here
<a href="http://www.simtec.ltd.uk/">http://www.simtec.ltd.uk/</a>

Location for login.aspx code behind?

I added a Login.aspx.cs file in the Server Project with some code in
Page_Load() I need to implement, and edited the first line of login.aspx this way:
<%@ Page Language="C#" CodeBehind="Login.aspx.cs" Inherits="Microsoft.LightSwitch.Security.ServerGenerated.Implementation.LogInPageBase" %>
What I added, exactly, are the Language and CodeBehind
properties.
But when I deploy and run the application, I get this error:
The type 'Microsoft.LightSwitch.Security.ServerGenerated.Implementation.LogInPageBase' is ambiguous: it could come from assembly 'C:\testing\Sandbox\bin\Microsoft.LightSwitch.Server.DLL' or from assembly 'C:\testing\Sandbox\bin\Application.Server.DLL'.
Please specify the assembly explicitly in the type name.
I understand this is because Login.aspx.cs already exists in some assembly.
Is there any way to Access Login.aspx code behind?
If not, how can I add my own login page to an HTML Client App without losing the already configured Forms security, roles, permissions, etc.?
thanks.
Nicolás.
Nicolás Lope de Barrios
If you found this post helpful, please "Vote as Helpful". If it actually answered your question, please remember to
"Mark as Answer". This will help other people find answers to their problems more quickly.

Josh:I tried your suggestion, edited Login.aspx like you said, and the code for Login.aspx.cs converted from vb is this:
using System;
using System.Collections.Generic;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.Security;
using Microsoft.LightSwitch;
using LightSwitchApplication;
using LightSwitchApplication.Helpers;
namespace LightSwitchApplication
public partial class Login : Microsoft.LightSwitch.Security.ServerGenerated.Implementation.LogInPageBase
protected void Page_Load(object sender, EventArgs e)
AuditHelper.CreateAuditTrailForLogin();
public Login()
Load += Page_Load;
As you can see, all I want to do is call AuditHelper.CreateAuditTrailForLogin()
on Page_Load()
But I'm getting this exception, wich is obvious what it means, but I don't know how to fix. Does it mean we're overriding Server generated Page_Load() so I have to write all the code that handles authentication?:
The method or operation is not implemented.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.NotImplementedException: The method or operation is not implemented.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[NotImplementedException: The method or operation is not implemented.]
LightSwitchApplication.Login.Page_Load(Object sender, EventArgs e) +36
Microsoft.LightSwitch.Security.ServerGenerated.Implementation.LogInPageBase.OnLoad(EventArgs e) +90
System.Web.UI.Control.LoadRecursive() +71
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3178
Any help appreciated.
Nicolás Lope de Barrios
If you found this post helpful, please "Vote as Helpful". If it actually answered your question, please remember to
"Mark as Answer". This will help other people find answers to their problems more quickly.

"Object Required" error when using the script block from the code behind

I try to use the following script block on the code behind page
<script defer='true' id='NavID' type='text/javascript'>Nav();</script>
and the function Nav() is on the .aspx page. It gives me the "Object Required" error message. BUT if I add an alert("hello!!!") line inside of the Nav() function, it works fine after the user closes the alert box. Has anyone experienced a similar problem? Please help. Thanks.

There is no way to troubleshoot this by looking at a picture of the diagram. LabVIEW 6 is almost prehistory and many things have changed, especially the file IO all looks different so it is impossible to tell what you are doing.
Error 7 is file not found, so most likely your string operations are not correct. What are the full strings? What is the final file name (maybe you are missing a "\" or maybe you are on a different OS type). Put an indicator at the path wire to see what's happening!
Is this a datalog file?
(Overall, the code is a bit suspect. Nobody needs a seven frame flat sequence. ) Why do a control and an indicator have the same label?)
LabVIEW Champion . Do more with less code and in less time .

How to execute the Code-Behind of .aspx linked using XML Data Connection

I have a dashboard with a live XML Data Connection tied to a Default.aspx file. That .aspx file has a Default.aspx.vb code-behind file tied to it with some logic in the Page_Load sub routine. If i open the .aspx on my own in the browser, the code-behind executes properly.
However, when I tie the .aspx to my dashboard and launch it I know for a fact the .aspx is being called (i have a placeholder on the dashboard to let me know if it executed or not) but its code-behind file is not. I can't seem to find a solution through Google, would anyone be able to lead me in the right direction with this? My code is as follows:
Default.aspx
<%@ Page Language="vb" aspcompat="true" Debug="true" validaterequest="false" AutoEventWireup="false" CodeBehind="Default.aspx.vb" Inherits="scheduleAppointment._Default" %>
<%
    'tester to see that script executes, this puts "ScriptExecuted" on a label on my dashboard
    Dim sXML As String
    sXML = "<data><variable name=" + Chr(34) + "Range_0" + Chr(34)
                  + "><row><column>ScriptExecuted</column></row></variable></data>"
    Response.Write(sXML)
%>
Default.aspx.vb
Imports Microsoft.Office.Interop
Partial Public Class _Default
    Inherits System.Web.UI.Page
    Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
            (I have code here creating a Microsoft Outlook appointment and saving/scheduling it. This is not being
             executed when running the dashboard itself, but I know the code works if I run the .aspx on my own
             in Internet Explorer browser)
    End Sub
End Class

Easy fix, apparently code-behind doesn't execute in Preview mode. Exported to .swf and ran in the Internet Explorer browser and it worked.

How to Get Resource value which are referred in code behind file using IResourceProvider

Hi Everyone,
Currently I'm working on moving the Resource file from "App_GlobalResources" to Database by using IResourceProvider. I created a CustomResourceProvider project using ResourceProviderFactory and able to get the resource values from DB which
are used in aspx page.
But i'm not able to get the values which are referring from code behind file.
Ex: Label1.Text = Resources.Common.Car; // This is still coming from resx file.
Can any one please let me know how to get the value from DB instead of resx file which are referred in cs file.
Appreciate your help.
The below code uses the ResourceProviderFactory which calls this method and gets it from DB. Please let me know if you need any more info.
public class DBResourceProviderFactory : ResourceProviderFactory
public override IResourceProvider CreateGlobalResourceProvider(string classKey)
return new DBResourceProvider(classKey);
public override IResourceProvider CreateLocalResourceProvider(string virtualPath)
// we should always get a path from the runtime
string classKey = virtualPath;
if (!string.IsNullOrEmpty(virtualPath))
virtualPath = virtualPath.Remove(0, 1);
classKey = virtualPath.Remove(0, virtualPath.IndexOf('/') + 1);
return new DBResourceProvider(classKey);
Regards, Ravi Neelam.

Hi Ravi Neelam.
>>Currently I'm working on moving the Resource file from "App_GlobalResources" to Database by using IResourceProvider.
Based on this message, your issue related to web application, questions related to Asp.Net should be posted in
Asp.Net forum.
Please reopen a new thread in that forum. You will get more efficient response.
Regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Embedding code behind a site created in muse to trigger a desired effect

I built another great site using Muse but the client wants to use a third party processing application that requires I:
1.) embed script (not a url) in the body section of the html (not the head),
Instead of placing the code in the <body><body> section (which I do not know how to access in muse), I tried placing the code in the head section available via the "Page Properties" metadata field -- and it does work. However. now I need to create a custom button to trigger this effect.
2.) I want to use a custom button but the client wants the button to blink between to colors. The third party vendor provided a code that would trigger the action of the first code but I need to find a way to make this all work.
First, I created the blinking effect by using a blank slideshow and placed a .png version of a button I created in ai in the fist position followed by a button also created in .png with the alternate color on top. I Then set the "Fade" speed to the minimum of .06 seconds. This method did provide the desired effect, but now how do I make it clickable?
I tried using the "Rectangle Tool" to place an empty, sans stroke div over the blinking button that I created with the idea that I would copy the designated action code into the html by way of the "Object" > "Insert HTML" but instead of placing the code behind the empty rectangle div, it creates it's own link with a "?" mark image. As a test I placed the unwanted "?" on top of the blinking button and previewed the page in the browser and it works causing the intended trigger effect when clicked. Also note that placing the element over the rotating slideshow did not obstruct the blinking effect.
The only problem is that I don't want to show this "?" that the "Insert HTML" path created, I need to show the blinking "Order Now" button that the client asked for.
Can anyone help?

Hi,
take a look o this thread, Can I use a php script in muse?
if you still have any question, please let us know

AdvancedDataGrid ItemRenderer Issue using code behind method

I have been trying to get an itemrenderer to correctly work in an advanveddatagrid. I've used several itemrenderers in the past so this is pretty basic. I haven't however tried to attach to a grid that is inside a page using the code behind method. My issue is that the grid breaks if I try to put more than one visual component on the renderer. See the images below:
Here is an example with a plain canvas itemrenderer:
As you can see the scroll bar appears and everything looks normal.
Here is the behavior if I add a label inside this component:
The scroll bar disappears and I'm unable to close the itemrenderer correctly.
Has anyone come across this issue before? Thanks for any help on this one!

I can't post all of the code since it's on a much larger page but hopefully this gives you an idea:
<custom:ClientPlans xmlns:mx="http://www.adobe.com/2006/mxml" width="920" height="550" xmlns:flexlib="http://code.google.com/p/flexlib/"
        fontFamily="HelveticaNeue Condensed" fontSize="11"
        xmlns:components="components.*"
        disabledColor="#FFFFFF"
        themeColor="#FFFFFF"
        horizontalScrollPolicy="off"
        verticalScrollPolicy="off"
        backgroundColor="#ffffff"
        cornerRadius="10"
        borderStyle="solid"
        borderThickness="0"
        horizontalCenter="0" verticalCenter="0" color="#808080">
<mx:AdvancedDataGrid id="adgPlans" width="100%" height="497" selectionMode="singleRow" editable="false"
                        color="#000000" fontSize="14" selectable="true"
                        liveScrolling="false"
                        showHeaders="false" variableRowHeight="true"
                        disclosureOpenIcon="@Embed(source='/images/gridMinus.png')"
                        disclosureClosedIcon="@Embed(source='/images/gridPlus.png')"
                        folderOpenIcon="@Embed(source='/images/folderOpenIcon.png')"
                        folderClosedIcon="@Embed(source='/images/folderclosedIcon.png')" borderThickness="1" borderStyle="solid">
                          <mx:dataProvider>
                                 <mx:GroupingCollection id="gcGroup">
                                        <mx:grouping>
                                            <mx:Grouping>
                                                <mx:GroupingField name="ClientName"/>
                                            </mx:Grouping>
                                        </mx:grouping>
                                 </mx:GroupingCollection>
                          </mx:dataProvider>
                        <mx:columns>
                            <mx:AdvancedDataGridColumn id="clientNameColumn" dataField="clientName" headerText="Client" sortable="true" width="200" />
                        </mx:columns>
                        <mx:rendererProviders>
                            <mx:AdvancedDataGridRendererProvider
                                column="{clientNameColumn}"
                                columnSpan="0"
                                depth="2"
                                renderer="components.subcomponents.clientRenderer3"/>
                        </mx:rendererProviders>
                    </mx:AdvancedDataGrid>
</custom:ClientPlans>
Code-Behind:
// ActionScript file
package com.name
        import mx.controls.AdvancedDataGrid;
    public class ClientPlans extends Canvas
        public var adgPlans:AdvancedDataGrid;
     public function ClientPlans ()
            super();
            this.addEventListener(FlexEvent.CREATION_COMPLETE, creationCompleteHandler);
        private function creationCompleteHandler (event:FlexEvent):void
              trace("cc");
Item Renderer:
<?xml version="1.0" encoding="utf-8"?>
<mx:Canvas xmlns:mx="http://www.adobe.com/2006/mxml"
    width="100%" height="150" borderStyle="solid" borderThickness="2" borderColor="#56ACD1" cornerRadius="8"
    fontFamily="HelveticaNeue Condensed" color="#000000" backgroundColor="#FFFFFF" backgroundAlpha="1.0">
    <mx:Label text="Hello!?"/>
</mx:Canvas>

Can FC put action script in a 'code behind'.

Once of the practices I do in FB3 is to move all my action script into 'code behind' files instead of having all the code in the mxml files. Does FC have the option to do that (as part of the gen process) and if not, does anyone else who 'codes' instead of 'designs' feel that is a benefit? I know I'd prefer it to be in a 'separate' as3 file. Also, if I DO move the code into code behinds (I've not tried it yet), does FC have any issues reading the code behind? I'll be trying that on a 'simple' project to be sure but figured I'd ask just in case anyone else wants to know...

The two references cited helped answer questions about Adobe's overall philosophy and approach that came up as I worked a simple example down the design/development stack of tools from Illustrator (AI) to Catalyst (FC) to Flash Builder 4 (FB).
Other questions that arose were:
Each application (AI, FC, FB) contains tools for design with some degree of overlap.
Will FC eventually include from AI (or Photoshop, InDesign, etc.) and the FB design view all functionality needed for interactive storyboarding and skin generation?
Is it the intent for FC to become the designer's tool and FB the developer's tool, at least for application design?
The diagram in the Gumbo skinning spec shows that base components and their subclasses are typically implemented in AS and skins in MXML and recommends this as the preferred design pattern. Yet when I converted one of my groups (essentially a form) to a customized component, and exported the project into FB, I noticed that FC had generated a single mxml file (CustomComponent1 ...) and not a pair of files (an X.as file for the base component and an X.mxml file for the skins).
For several reasons, wouldn't you want to generate separate files as depicted in the Gumbo diagram as a starting point for code customization?
How does one develop custom components in FB (or using AI+FC+FB) and package them as a library so that they can be dropped into FC and used in the way that the current set of 5 components (button, hscrollbar, vscrollbar, text input and data list) are used?
How will I integrate my hand-coded dynamic components for data visualization alongside more generic and static app components on an RIA page?
How would I use AI+FC to design liquid layouts where children at each level often utilize constraints (i.e. top, bottom, left, right) between parent and child?
For agile methodologies, how will refactoring the interaction or software design work in this new world where interaction designers are trying to maintain full control over appearance and interactive behavior?
Finally, I would like to know what tools and steps Ely used to develop the component shown in the video. It would be instructive to turn that into a tutorial that we could walk through, step by step, in slow motion
While I understand the arguments for separation of design and development as a workflow methodology, those of us with development and HCI/visualization backgrounds building research prototypes would like to see integration of the design and development tools (from the perspective of the workflow, not the architecture and code).
As Jordan said, the direction you are heading is inspiring. Keep up the good work.

Jquery Ajax calling code-behind Error - 405 (Method Not Allowed)

Hi,
I am working on a web form with Jquery, Ajax to call a code-behind (webservice), but I get the following error: 405 (Method Not Allowed).
See code...
../Ops/new-item.aspx
<%@ Page Title="" Language="C#" MasterPageFile="~/Site.Master" AutoEventWireup="true" CodeBehind="new-item.aspx.cs" Inherits="WebAppFrekuency.Ops.new_item" %>
<asp:Content ID="Content1" ContentPlaceHolderID="HeadContent" runat="server">
<script src="../Scripts/js-new.js" type="text/javascript"></script>
<script src="../Scripts/jquery-1.11.1.js" type="text/javascript"></script>
</asp:Content>
<asp:Content ID="Content2" ContentPlaceHolderID="MainContent" runat="server">
<div id="message">
Mensaje
</div>
<div id="form">
<input type="text" id="barcode" name="barcode" /> <button id="submit" type="button">Crear</button>
</div>
</asp:Content>
../Scripts/js-new.js
$(document).ready(function () {
//Informacion de contacto
var error = false;
var message = "";
$("#submit").click(function () {
if ($("#barcode").val() == "") {
$("#barcode").css("border", "1px solid red");
error = true;
message = "Error - El campo codigo de barras es obligatorio";
else {
$("#barcode").css("border", "");
message = "";
if (error == false) {
var formData = '{name:"' + $("#barcode").val() + '"}';
// process the form
$.ajax({
type: "POST", // define the type of HTTP verb we want to use (POST for our form)
url: "new-item.apsx/Search", // the url where we want to POST
data: formData, // our data object
contentType: "application/json; charset=utf-8",
dataType: "json", // what type of data do we expect back from the server
success: OnSuccess,
failure: function (response) {
alert("Falla - " + response.d);
// using the done promise callback
event.preventDefault();
} else { alert(message); }
function OnSuccess(response) {
alert("Exito - " + response.d);
../Ops/new-item.aspx.cs
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Net;
using System.IO;
namespace WebAppFrekuency.Ops
public partial class new_item : System.Web.UI.Page
protected void Page_Load(object sender, EventArgs e)
[System.Web.Services.WebMethod]
public static string Search(string epc)
return "YES";
Any ideas why I am getting this error?
Thanks,

I read the article, but problem persists, next is the web.config file
<?xml version="1.0"?>

<configuration>
<connectionStrings>
<add name="ApplicationServices"
connectionString="data source=.\SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|\aspnetdb.mdf;User Instance=true"
providerName="System.Data.SqlClient" />
</connectionStrings>
<system.web>
<compilation debug="true" targetFramework="4.0" />
<authentication mode="Forms">
<forms loginUrl="~/Account/Login.aspx" timeout="2880" />
</authentication>
<membership>
<providers>
<clear/>
<add name="AspNetSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider" connectionStringName="ApplicationServices"
enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="false" requiresUniqueEmail="false"
maxInvalidPasswordAttempts="5" minRequiredPasswordLength="6" minRequiredNonalphanumericCharacters="0" passwordAttemptWindow="10"
applicationName="/" />
</providers>
</membership>
<profile>
<providers>
<clear/>
<add name="AspNetSqlProfileProvider" type="System.Web.Profile.SqlProfileProvider" connectionStringName="ApplicationServices" applicationName="/"/>
</providers>
</profile>
<roleManager enabled="false">
<providers>
<clear/>
<add name="AspNetSqlRoleProvider" type="System.Web.Security.SqlRoleProvider" connectionStringName="ApplicationServices" applicationName="/" />
<add name="AspNetWindowsTokenRoleProvider" type="System.Web.Security.WindowsTokenRoleProvider" applicationName="/" />
</providers>
</roleManager>
<webServices>
<protocols>
<add name="HttpGet"/>
<add name="HttpPost"/>
</protocols>
</webServices>
</system.web>
<system.webServer>
<modules runAllManagedModulesForAllRequests="true"/>
<httpProtocol>
<customHeaders>
<add name="Access-Control-Allow-Origin" value="*" />
<add name="Access-Control-Allow-Headers" value="Content-Type" />
</customHeaders>
</httpProtocol>
</system.webServer>
</configuration>
and the machine.config file looks like
<?xml version="1.0"?>

<configuration>
<configSections>
<section name="oracle.dataaccess.client" type="System.Data.Common.DbProviderConfigurationHandler, System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="appSettings" type="System.Configuration.AppSettingsSection, System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" restartOnExternalChanges="false" requirePermission="false" />
<section name="connectionStrings" type="System.Configuration.ConnectionStringsSection, System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" requirePermission="false" />
<section name="mscorlib" type="System.Configuration.IgnoreSection, System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowLocation="false" />
<section name="runtime" type="System.Configuration.IgnoreSection, System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowLocation="false" />
<section name="assemblyBinding" type="System.Configuration.IgnoreSection, System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowLocation="false" />
<section name="satelliteassemblies" type="System.Configuration.IgnoreSection, System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowLocation="false" />
<section name="startup" type="System.Configuration.IgnoreSection, System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowLocation="false" />
<section name="system.codedom" type="System.CodeDom.Compiler.CodeDomConfigurationHandler, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="system.data" type="System.Data.Common.DbProviderFactoriesConfigurationHandler, System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="system.data.dataset" type="System.Configuration.NameValueFileSectionHandler, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" restartOnExternalChanges="false" />
<section name="system.data.odbc" type="System.Data.Common.DbProviderConfigurationHandler, System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="system.data.oledb" type="System.Data.Common.DbProviderConfigurationHandler, System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="system.data.oracleclient" type="System.Data.Common.DbProviderConfigurationHandler, System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="system.data.sqlclient" type="System.Data.Common.DbProviderConfigurationHandler, System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="system.diagnostics" type="System.Diagnostics.SystemDiagnosticsSection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="system.runtime.remoting" type="System.Configuration.IgnoreSection, System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowLocation="false" />
<section name="system.windows.forms" type="System.Windows.Forms.WindowsFormsSection, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="windows" type="System.Configuration.IgnoreSection, System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowLocation="false" />
<section name="uri" type="System.Configuration.UriSection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<sectionGroup name="system.runtime.caching" type="System.Runtime.Caching.Configuration.CachingSectionGroup, System.Runtime.Caching, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a">
<section name="memoryCache" type="System.Runtime.Caching.Configuration.MemoryCacheSection, System.Runtime.Caching, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
</sectionGroup>
<sectionGroup name="system.xml.serialization" type="System.Xml.Serialization.Configuration.SerializationSectionGroup, System.Xml, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
<section name="schemaImporterExtensions" type="System.Xml.Serialization.Configuration.SchemaImporterExtensionsSection, System.Xml, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="dateTimeSerialization" type="System.Xml.Serialization.Configuration.DateTimeSerializationSection, System.Xml, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="xmlSerializer" type="System.Xml.Serialization.Configuration.XmlSerializerSection, System.Xml, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />
</sectionGroup>
<sectionGroup name="system.net" type="System.Net.Configuration.NetSectionGroup, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
<section name="authenticationModules" type="System.Net.Configuration.AuthenticationModulesSection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="connectionManagement" type="System.Net.Configuration.ConnectionManagementSection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="defaultProxy" type="System.Net.Configuration.DefaultProxySection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<sectionGroup name="mailSettings" type="System.Net.Configuration.MailSettingsSectionGroup, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
<section name="smtp" type="System.Net.Configuration.SmtpSection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
</sectionGroup>
<section name="requestCaching" type="System.Net.Configuration.RequestCachingSection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="settings" type="System.Net.Configuration.SettingsSection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="webRequestModules" type="System.Net.Configuration.WebRequestModulesSection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
</sectionGroup>
<sectionGroup name="system.runtime.serialization" type="System.Runtime.Serialization.Configuration.SerializationSectionGroup, System.Runtime.Serialization, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
<section name="dataContractSerializer" type="System.Runtime.Serialization.Configuration.DataContractSerializerSection, System.Runtime.Serialization, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
</sectionGroup>
<sectionGroup name="system.serviceModel" type="System.ServiceModel.Configuration.ServiceModelSectionGroup, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
<section name="behaviors" type="System.ServiceModel.Configuration.BehaviorsSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="bindings" type="System.ServiceModel.Configuration.BindingsSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="client" type="System.ServiceModel.Configuration.ClientSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="comContracts" type="System.ServiceModel.Configuration.ComContractsSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="commonBehaviors" type="System.ServiceModel.Configuration.CommonBehaviorsSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" allowDefinition="MachineOnly" allowExeDefinition="MachineOnly" />
<section name="diagnostics" type="System.ServiceModel.Configuration.DiagnosticSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="extensions" type="System.ServiceModel.Configuration.ExtensionsSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="machineSettings" type="System.ServiceModel.Configuration.MachineSettingsSection, SMDiagnostics, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" allowDefinition="MachineOnly" allowExeDefinition="MachineOnly" />
<section name="protocolMapping" type="System.ServiceModel.Configuration.ProtocolMappingSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="serviceHostingEnvironment" type="System.ServiceModel.Configuration.ServiceHostingEnvironmentSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" allowDefinition="MachineToApplication" />
<section name="services" type="System.ServiceModel.Configuration.ServicesSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="standardEndpoints" type="System.ServiceModel.Configuration.StandardEndpointsSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="routing" type="System.ServiceModel.Routing.Configuration.RoutingSection, System.ServiceModel.Routing, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<section name="tracking" type="System.ServiceModel.Activities.Tracking.Configuration.TrackingSection, System.ServiceModel.Activities, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
</sectionGroup>
<sectionGroup name="system.serviceModel.activation" type="System.ServiceModel.Activation.Configuration.ServiceModelActivationSectionGroup, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
<section name="diagnostics" type="System.ServiceModel.Activation.Configuration.DiagnosticSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="net.pipe" type="System.ServiceModel.Activation.Configuration.NetPipeSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="net.tcp" type="System.ServiceModel.Activation.Configuration.NetTcpSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
</sectionGroup>
<sectionGroup name="system.transactions" type="System.Transactions.Configuration.TransactionsSectionGroup, System.Transactions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, Custom=null">
<section name="defaultSettings" type="System.Transactions.Configuration.DefaultSettingsSection, System.Transactions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, Custom=null" />
<section name="machineSettings" type="System.Transactions.Configuration.MachineSettingsSection, System.Transactions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, Custom=null" allowDefinition="MachineOnly" allowExeDefinition="MachineOnly" />
</sectionGroup>
<sectionGroup name="system.web" type="System.Web.Configuration.SystemWebSectionGroup, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a">
<section name="anonymousIdentification" type="System.Web.Configuration.AnonymousIdentificationSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="authentication" type="System.Web.Configuration.AuthenticationSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="authorization" type="System.Web.Configuration.AuthorizationSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="browserCaps" type="System.Web.Configuration.HttpCapabilitiesSectionHandler, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="clientTarget" type="System.Web.Configuration.ClientTargetSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="compilation" type="System.Web.Configuration.CompilationSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" requirePermission="false" />
<section name="customErrors" type="System.Web.Configuration.CustomErrorsSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="deployment" type="System.Web.Configuration.DeploymentSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineOnly" />
<section name="deviceFilters" type="System.Web.Mobile.DeviceFiltersSection, System.Web.Mobile, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="fullTrustAssemblies" type="System.Web.Configuration.FullTrustAssembliesSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="globalization" type="System.Web.Configuration.GlobalizationSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="healthMonitoring" type="System.Web.Configuration.HealthMonitoringSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="hostingEnvironment" type="System.Web.Configuration.HostingEnvironmentSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="httpCookies" type="System.Web.Configuration.HttpCookiesSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="httpHandlers" type="System.Web.Configuration.HttpHandlersSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="httpModules" type="System.Web.Configuration.HttpModulesSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="httpRuntime" type="System.Web.Configuration.HttpRuntimeSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="identity" type="System.Web.Configuration.IdentitySection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="machineKey" type="System.Web.Configuration.MachineKeySection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="membership" type="System.Web.Configuration.MembershipSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="mobileControls" type="System.Web.UI.MobileControls.MobileControlsSection, System.Web.Mobile, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="pages" type="System.Web.Configuration.PagesSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" requirePermission="false" />
<section name="partialTrustVisibleAssemblies" type="System.Web.Configuration.PartialTrustVisibleAssembliesSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="processModel" type="System.Web.Configuration.ProcessModelSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineOnly" allowLocation="false" />
<section name="profile" type="System.Web.Configuration.ProfileSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="protocols" type="System.Web.Configuration.ProtocolsSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToWebRoot" />
<section name="roleManager" type="System.Web.Configuration.RoleManagerSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="securityPolicy" type="System.Web.Configuration.SecurityPolicySection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="sessionPageState" type="System.Web.Configuration.SessionPageStateSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="sessionState" type="System.Web.Configuration.SessionStateSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="siteMap" type="System.Web.Configuration.SiteMapSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="trace" type="System.Web.Configuration.TraceSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="trust" type="System.Web.Configuration.TrustSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="urlMappings" type="System.Web.Configuration.UrlMappingsSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="webControls" type="System.Web.Configuration.WebControlsSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="webParts" type="System.Web.Configuration.WebPartsSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="webServices" type="System.Web.Services.Configuration.WebServicesSection, System.Web.Services, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="xhtmlConformance" type="System.Web.Configuration.XhtmlConformanceSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<sectionGroup name="caching" type="System.Web.Configuration.SystemWebCachingSectionGroup, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a">
<section name="cache" type="System.Web.Configuration.CacheSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="outputCache" type="System.Web.Configuration.OutputCacheSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="outputCacheSettings" type="System.Web.Configuration.OutputCacheSettingsSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="sqlCacheDependency" type="System.Web.Configuration.SqlCacheDependencySection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
</sectionGroup>
</sectionGroup>
<sectionGroup name="system.web.extensions" type="System.Web.Configuration.SystemWebExtensionsSectionGroup, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35">
<sectionGroup name="scripting" type="System.Web.Configuration.ScriptingSectionGroup, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35">
<section name="scriptResourceHandler" type="System.Web.Configuration.ScriptingScriptResourceHandlerSection, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="false" allowDefinition="MachineToApplication" />
<sectionGroup name="webServices" type="System.Web.Configuration.ScriptingWebServicesSectionGroup, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35">
<section name="jsonSerialization" type="System.Web.Configuration.ScriptingJsonSerializationSection, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="false" allowDefinition="Everywhere" />
<section name="profileService" type="System.Web.Configuration.ScriptingProfileServiceSection, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="false" allowDefinition="MachineToApplication" />
<section name="authenticationService" type="System.Web.Configuration.ScriptingAuthenticationServiceSection, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="false" allowDefinition="MachineToApplication" />
<section name="roleService" type="System.Web.Configuration.ScriptingRoleServiceSection, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="false" allowDefinition="MachineToApplication" />
</sectionGroup>
</sectionGroup>
</sectionGroup>
<sectionGroup name="system.xaml.hosting" type="System.Xaml.Hosting.Configuration.XamlHostingSectionGroup, System.Xaml.Hosting, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35">
<section name="httpHandlers" type="System.Xaml.Hosting.Configuration.XamlHostingSection, System.Xaml.Hosting, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
</sectionGroup>
<section name="system.webServer" type="System.Configuration.IgnoreSection, System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</configSections>
<configProtectedData defaultProvider="RsaProtectedConfigurationProvider">
<providers>
<add name="RsaProtectedConfigurationProvider" type="System.Configuration.RsaProtectedConfigurationProvider,System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" description="Uses RsaCryptoServiceProvider to encrypt and decrypt" keyContainerName="NetFrameworkConfigurationKey" cspProviderName="" useMachineContainer="true" useOAEP="false" />
<add name="DataProtectionConfigurationProvider" type="System.Configuration.DpapiProtectedConfigurationProvider,System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" description="Uses CryptProtectData and CryptUnProtectData Windows APIs to encrypt and decrypt" useMachineProtection="true" keyEntropy="" />
</providers>
</configProtectedData>
<runtime>
<assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
<dependentAssembly xmlns="urn:schemas-microsoft-com:asm.v1">
<assemblyIdentity name="MySql.Data" publicKeyToken="c5687fc88969c44d" culture="neutral" />
<bindingRedirect oldVersion="6.7.4.0" newVersion="6.7.5.0" />
</dependentAssembly>
<dependentAssembly xmlns="urn:schemas-microsoft-com:asm.v1">
<assemblyIdentity name="MySql.Data.Entity" publicKeyToken="c5687fc88969c44d" culture="neutral" />
<bindingRedirect oldVersion="6.7.4.0" newVersion="6.7.5.0" />
</dependentAssembly>
<dependentAssembly xmlns="urn:schemas-microsoft-com:asm.v1">
<assemblyIdentity name="MySql.Web" publicKeyToken="c5687fc88969c44d" culture="neutral" />
<bindingRedirect oldVersion="6.7.4.0" newVersion="6.7.5.0" />
</dependentAssembly>
</assemblyBinding>
</runtime>
<connectionStrings>
<add name="LocalSqlServer" connectionString="data source=.\SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true"
providerName="System.Data.SqlClient" />
<add name="LocalMySqlServer" connectionString="" />
<add name="OraAspNetConString" connectionString=" " />
</connectionStrings>
<system.data>
<DbProviderFactories>
<add name="Oracle Data Provider for .NET" invariant="Oracle.DataAccess.Client" description="Oracle Data Provider for .NET" type="Oracle.DataAccess.Client.OracleClientFactory, Oracle.DataAccess, Version=4.112.2.0, Culture=neutral, PublicKeyToken=89b483f429c47342" />
<add name="Microsoft SQL Server Compact Data Provider 4.0" invariant="System.Data.SqlServerCe.4.0" description=".NET Framework Data Provider for Microsoft SQL Server Compact" type="System.Data.SqlServerCe.SqlCeProviderFactory, System.Data.SqlServerCe, Version=4.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91" />
<add name="MySQL Data Provider" invariant="MySql.Data.MySqlClient" description=".Net Framework Data Provider for MySQL" type="MySql.Data.MySqlClient.MySqlClientFactory, MySql.Data, Version=6.7.5.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d" />
<add name="Microsoft SQL Server Compact Data Provider" invariant="System.Data.SqlServerCe.3.5" description=".NET Framework Data Provider for Microsoft SQL Server Compact" type="System.Data.SqlServerCe.SqlCeProviderFactory, System.Data.SqlServerCe, Version=3.5.1.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91" />
</DbProviderFactories>
</system.data>
<system.serviceModel>
<extensions>
<behaviorExtensions>
<add name="persistenceProvider" type="System.ServiceModel.Configuration.PersistenceProviderElement, System.WorkflowServices, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="workflowRuntime" type="System.ServiceModel.Configuration.WorkflowRuntimeElement, System.WorkflowServices, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="enableWebScript" type="System.ServiceModel.Configuration.WebScriptEnablingElement, System.ServiceModel.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="webHttp" type="System.ServiceModel.Configuration.WebHttpElement, System.ServiceModel.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="serviceDiscovery" type="System.ServiceModel.Discovery.Configuration.ServiceDiscoveryElement, System.ServiceModel.Discovery, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="endpointDiscovery" type="System.ServiceModel.Discovery.Configuration.EndpointDiscoveryElement, System.ServiceModel.Discovery, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="etwTracking" type="System.ServiceModel.Activities.Configuration.EtwTrackingBehaviorElement, System.ServiceModel.Activities, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="routing" type="System.ServiceModel.Routing.Configuration.RoutingExtensionElement, System.ServiceModel.Routing, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="soapProcessing" type="System.ServiceModel.Routing.Configuration.SoapProcessingExtensionElement, System.ServiceModel.Routing, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="workflowIdle" type="System.ServiceModel.Activities.Configuration.WorkflowIdleElement, System.ServiceModel.Activities, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="workflowUnhandledException" type="System.ServiceModel.Activities.Configuration.WorkflowUnhandledExceptionElement, System.ServiceModel.Activities, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="bufferedReceive" type="System.ServiceModel.Activities.Configuration.BufferedReceiveElement, System.ServiceModel.Activities, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="sendMessageChannelCache" type="System.ServiceModel.Activities.Configuration.SendMessageChannelCacheElement, System.ServiceModel.Activities, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="sqlWorkflowInstanceStore" type="System.ServiceModel.Activities.Configuration.SqlWorkflowInstanceStoreElement, System.ServiceModel.Activities, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="workflowInstanceManagement" type="System.ServiceModel.Activities.Configuration.WorkflowInstanceManagementElement, System.ServiceModel.Activities, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="Microsoft.VisualStudio.Diagnostics.ServiceModelSink.Behavior" type="Microsoft.VisualStudio.Diagnostics.ServiceModelSink.Behavior, Microsoft.VisualStudio.Diagnostics.ServiceModelSink, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</behaviorExtensions>
<bindingElementExtensions>
<add name="webMessageEncoding" type="System.ServiceModel.Configuration.WebMessageEncodingElement, System.ServiceModel.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="context" type="System.ServiceModel.Configuration.ContextBindingElementExtensionElement, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<add name="byteStreamMessageEncoding" type="System.ServiceModel.Configuration.ByteStreamMessageEncodingElement, System.ServiceModel.Channels, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="discoveryClient" type="System.ServiceModel.Discovery.Configuration.DiscoveryClientElement, System.ServiceModel.Discovery, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
</bindingElementExtensions>
<bindingExtensions>
<add name="wsHttpContextBinding" type="System.ServiceModel.Configuration.WSHttpContextBindingCollectionElement, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<add name="netTcpContextBinding" type="System.ServiceModel.Configuration.NetTcpContextBindingCollectionElement, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<add name="webHttpBinding" type="System.ServiceModel.Configuration.WebHttpBindingCollectionElement, System.ServiceModel.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="basicHttpContextBinding" type="System.ServiceModel.Configuration.BasicHttpContextBindingCollectionElement, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
</bindingExtensions>
<endpointExtensions>
<add name="dynamicEndpoint" type="System.ServiceModel.Discovery.Configuration.DynamicEndpointCollectionElement, System.ServiceModel.Discovery, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="discoveryEndpoint" type="System.ServiceModel.Discovery.Configuration.DiscoveryEndpointCollectionElement, System.ServiceModel.Discovery, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="udpDiscoveryEndpoint" type="System.ServiceModel.Discovery.Configuration.UdpDiscoveryEndpointCollectionElement, System.ServiceModel.Discovery, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="announcementEndpoint" type="System.ServiceModel.Discovery.Configuration.AnnouncementEndpointCollectionElement, System.ServiceModel.Discovery, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="udpAnnouncementEndpoint" type="System.ServiceModel.Discovery.Configuration.UdpAnnouncementEndpointCollectionElement, System.ServiceModel.Discovery, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="workflowControlEndpoint" type="System.ServiceModel.Activities.Configuration.WorkflowControlEndpointCollectionElement, System.ServiceModel.Activities, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="webHttpEndpoint" type="System.ServiceModel.Configuration.WebHttpEndpointCollectionElement, System.ServiceModel.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="webScriptEndpoint" type="System.ServiceModel.Configuration.WebScriptEndpointCollectionElement, System.ServiceModel.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
</endpointExtensions>
</extensions>
<client>
<metadata>
<policyImporters>
<extension type="System.ServiceModel.Channels.ContextBindingElementImporter, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, processorArchitecture=MSIL" />
</policyImporters>
<wsdlImporters>
<extension type="System.ServiceModel.Channels.ContextBindingElementImporter, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, processorArchitecture=MSIL" />
</wsdlImporters>
</metadata>
</client>
<tracking>
<profiles>
<trackingProfile name="">
<workflow activityDefinitionId="*">
<workflowInstanceQueries>
<workflowInstanceQuery>
<states>
<state name="*" />
</states>
</workflowInstanceQuery>
</workflowInstanceQueries>
<activityStateQueries>
<activityStateQuery activityName="*">
<states>
<state name="Faulted" />
</states>
</activityStateQuery>
</activityStateQueries>
<faultPropagationQueries>
<faultPropagationQuery faultSourceActivityName="*" faultHandlerActivityName="*" />
</faultPropagationQueries>
</workflow>
</trackingProfile>
</profiles>
</tracking>
<commonBehaviors>
<endpointBehaviors>
<Microsoft.VisualStudio.Diagnostics.ServiceModelSink.Behavior />
</endpointBehaviors>
<serviceBehaviors>
<Microsoft.VisualStudio.Diagnostics.ServiceModelSink.Behavior />
</serviceBehaviors>
</commonBehaviors>
</system.serviceModel>
<system.web>
<processModel autoConfig="true" />
<httpHandlers />
<membership>
<providers>
<add name="OracleMembershipProvider" type="Oracle.Web.Security.OracleMembershipProvider, Oracle.Web, Version=4.112.2.0, Culture=neutral, PublicKeyToken=89b483f429c47342" connectionStringName="OraAspNetConString" applicationName="" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="true" requiresUniqueEmail="false" passwordFormat="Hashed" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="7" minRequiredNonalphanumericCharacters="1" passwordAttemptWindow="10" passwordStrengthRegularExpression="" />
<add name="AspNetSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" connectionStringName="LocalSqlServer" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="true" applicationName="/" requiresUniqueEmail="false" passwordFormat="Hashed" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="7" minRequiredNonalphanumericCharacters="1" passwordAttemptWindow="10" passwordStrengthRegularExpression="" />
<add name="MySQLMembershipProvider" type="MySql.Web.Security.MySQLMembershipProvider, MySql.Web, Version=6.7.5.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d" connectionStringName="LocalMySqlServer" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="true" applicationName="/" requiresUniqueEmail="false" passwordFormat="Clear" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="7" minRequiredNonalphanumericCharacters="1" passwordAttemptWindow="10" passwordStrengthRegularExpression="" />
</providers>
</membership>
<profile>
<providers>
<add name="OracleProfileProvider" type="Oracle.Web.Profile.OracleProfileProvider, Oracle.Web, Version=4.112.2.0, Culture=neutral, PublicKeyToken=89b483f429c47342" connectionStringName="OraAspNetConString" applicationName="" />
<add name="AspNetSqlProfileProvider" connectionStringName="LocalSqlServer" applicationName="/" type="System.Web.Profile.SqlProfileProvider, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add name="MySQLProfileProvider" type="MySql.Web.Profile.MySQLProfileProvider, MySql.Web, Version=6.7.5.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d" connectionStringName="LocalMySqlServer" applicationName="/" />
</providers>
</profile>
<roleManager>
<providers>
<add name="OracleRoleProvider" type="Oracle.Web.Security.OracleRoleProvider, Oracle.Web, Version=4.112.2.0, Culture=neutral, PublicKeyToken=89b483f429c47342" connectionStringName="OraAspNetConString" applicationName="" />
<add name="AspNetSqlRoleProvider" connectionStringName="LocalSqlServer" applicationName="/" type="System.Web.Security.SqlRoleProvider, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add name="AspNetWindowsTokenRoleProvider" applicationName="/" type="System.Web.Security.WindowsTokenRoleProvider, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add name="MySQLRoleProvider" type="MySql.Web.Security.MySQLRoleProvider, MySql.Web, Version=6.7.5.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d" connectionStringName="LocalMySqlServer" applicationName="/" />
</providers>
</roleManager>
<siteMap>
<providers>
<add name="OracleSiteMapProvider" type="Oracle.Web.SiteMap.OracleSiteMapProvider, Oracle.Web, Version=4.112.2.0, Culture=neutral, PublicKeyToken=89b483f429c47342" connectionStringName="OraAspNetConString" applicationName="" securityTrimmingEnabled="true" />
</providers>
</siteMap>
<webParts>
<personalization>
<providers>
<add name="OraclePersonalizationProvider" type="Oracle.Web.Personalization.OraclePersonalizationProvider, Oracle.Web, Version=4.112.2.0, Culture=neutral, PublicKeyToken=89b483f429c47342" connectionStringName="OraAspNetConString" applicationName="" />
</providers>
</personalization>
</webParts>
<healthMonitoring>
<providers>
<add name="OracleWebEventProvider" type="Oracle.Web.Management.OracleWebEventProvider, Oracle.Web, Version=4.112.2.0, Culture=neutral, PublicKeyToken=89b483f429c47342" connectionStringName="OraAspNetConString" buffer="true" bufferMode="OracleNotification" />
</providers>
</healthMonitoring>
<webServices>
<protocols>
<add name="HttpSoap"/>
<add name="HttpPost"/>
<add name="HttpGet"/>
<add name="Documentation"/>
</protocols>
</webServices>
</system.web>
</configuration>
Thanks,
Mario

Error Message in Code Behind Visual Web Part

I want to show validation message in code behing when i click submit button,below is my code
<asp:TextBox ID="txtBoxName" runat="server" Width="50%"></asp:TextBox>
<asp:RequiredFieldValidator ID="rfvCompanyName" ControlToValidate="txtBoxName"
ValidationGroup="RegistrationGrp" SetFocusOnError="True" runat="server" Text="*" ErrorMessage="Please Enter Name"></asp:RequiredFieldValidator>
protected void btnSubmit_Click(object sender, EventArgs e)
i want to show this error message "Please enter name"
from code behind,how do i do that??

I am inserting item from the input textbox in the sharepoint list in submit button like below,so i did what u suggested in that click event
protected void btnSubmit_Click(object sender, EventArgs e)
if (!Page.IsValid)
rfvCompanyName.ErrorMessage = "test test";
return;
using (SPWeb web = site.OpenWeb())
SPList list = web.Lists["Company Details"];
SPListItem item = list.Items.Add();
item["Title"] = txtBoxName.Text;
item.Update();
but it's not showing this message,please suggest what i am missing

Java page fault with inventory service

Hi
Having an issue with java and the inventory service. Shortly after
lunching I get the following error:
java: Page fault processor exception occurred while executing class
com.novell.z
enworks.desktop.inventory.servercommon.ZENWorksInv entoryServiceManager
State of Registers at Processor Exception:
EIP=8DDC4A7C, EFLAGS=10212, EAX=0, ECX=D9917A08, EDX=50,
EBX=7070A86C, ESP=7070A834, EBP=7070A834, ESI=7070A87C, EDI=D9917A08,
The exception occurred while executing code in: JVM.NLM (8dbbe000)
The exception occurred while running thread: Java_1845 XMLTime (A63980E0)
java: Class
com.novell.zenworks.desktop.inventory.servercommon .ZENWorksInventory
ServiceManager exited with status -5
I have not been able to track down a tid.
Thanks,
Will

Sorry forgot the specs:
Zen sp1 ir3a hp2
netWare 6.5 sp6.
Java Version 1.42.07
Will K wrote:
> Hi
>
> Having an issue with java and the inventory service. Shortly after
> lunching I get the following error:
>
> -------------------------------------------------------------------------------
>
> java: Page fault processor exception occurred while executing class
> com.novell.z
> enworks.desktop.inventory.servercommon.ZENWorksInv entoryServiceManager
>
> State of Registers at Processor Exception:
> EIP=8DDC4A7C, EFLAGS=10212, EAX=0, ECX=D9917A08, EDX=50,
> EBX=7070A86C, ESP=7070A834, EBP=7070A834, ESI=7070A87C, EDI=D9917A08,
>
> The exception occurred while executing code in: JVM.NLM (8dbbe000)
> The exception occurred while running thread: Java_1845 XMLTime (A63980E0)
> -------------------------------------------------------------------------------
>
> java: Class
> com.novell.zenworks.desktop.inventory.servercommon .ZENWorksInventory
> ServiceManager exited with status -5
>
> I have not been able to track down a tid.
>
> Thanks,
>
> Will

Java pages w/ code behind

Similar Messages

Maybe you are looking for