Java Runtime Issues

I'm trying to open my java preferences and it says that I need to download the java runtime but when I try to download it it says I'm not connected to the internet when I am

Are you running Safari
If so
Safari/Preferences/Security/Enable Java   is checked
also see
https://discussions.apple.com/message/18168238#18168238

Similar Messages

  • The Java RunTime Environment Issue

    Hi All,
    I was trying to clone my existing 11.1.0.7 home to the new one. in process of registering the home , I discovered following issues.
    OS :- HPUX Itanium
    $ ./runInstaller -silent -attachHome -invPtrLoc /var/opt/oracle/oraInst.epmdev.loc \
    ORACLE_HOME="/db/epmdev/oracle/product/11.1.0" ORACLE_HOME_NAME="EPMDEV">
    Starting Oracle Universal Installer...
    Checking swap space: must be greater than 500 MB.   Actual 23175 MB    Passed
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2013-08-02_10-56-10AM. Please wait ...The Java RunTime Environment was not found at /tmp/O
    raInstall2013-08-02_10-56-10AM/jre/bin/java. Hence, the Oracle Universal Installer cannot be run.
    Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again.
    Regards

    As Miriam has helpfully pointed out, Pith Helmet is a Safari plug in. You won't find it in Applications, rather you'll see it in your home folder's Library/Application Support.
    As you have now added, these difficulties are being experienced with all three browsers, then you can discount Pith Helmet as it is Safari only, but it was a relevant suggestion based on your first post. I use it to cut out a lot of the 'ad noise' you get on sites.
    As Nathan has said, 10.5 should be working fine on your hardware, and agree with his fresh approach suggestion. But as you don't have the 10.5 disks to do this you need to get your own set of disks. Disks are not just software, but also have utility functions that you may require in the future. Also with Apple, legally, you must own the operating system installed. Currently you don't.
    As you got the computer for free, buying a set of Retail Leopard Disks, has you still in front.
    Prior to this, you could remove Firefox completely and download and install it again and see if that works properly, but that would be surprising as it appears to be some system wide defect and your thoughts about a malfunctioning Java runtime is a likely cause.

  • Error on java runtime when issue command smc

    Hi all,
    Getting the below error when try to run Solaris Management Console.
    No suitable Java runtime found in any of the following directories:
    /usr/j2se/bin /usr /usr/j2se
    Please set the JAVA_HOME environment variable to point to a Java 2
    installation and run /usr/sadm/lib/smc/bin/smc again.
    Any specific path to set or installation incomplete? Thanks a lot.

    Hi Kal!
    Thank you for reply.
    I need to add -XX:MaxPermSize=256m as parameter.. for example
    java -XX:MaxPermSize=256m -cp C:\MyProject\myclasses....
    Is that right?
    Thanks
    Regards
    Giampy

  • In portal login java runtime error --

    Hi all,
    I tried to login to the portal page.But its suddenly throwing an java runtime error.
    Its like the same issue in forum
    /thread/26144 [original link is broken]
    please have a look of this forum.
    regards
    Vijay

    Hi Vijay,
    Problem is with the standard java users,
    Check the status of the ff. and if you choose, try changing the passwords
    SAPJSF, SLDAPIUSER, SLDSUSER, J2EE_ADMIN and J2EE_GUEST are the common standard users of the Java Systems.
    Regards,
    Jeff

  • A fatal error has been detected by the Java Runtime Environment: SIGSEGV

    Hi I am getting the Following error in Weblogic Server 10.3.5
    I have installed WLS10.3.5 on Linux machine 64 bit.
    Request someone to help resolve this issue.
    Thanking in anticpation.
    Regards,
    Sachin Gupta
    # A fatal error has been detected by the Java Runtime Environment:
    # SIGSEGV (0xb) at pc=0x00002ad2f23703b2, pid=21725, tid=1098344768
    # JRE version: 6.0_37-b06
    # Java VM: Java HotSpot(TM) 64-Bit Server VM (20.12-b01 mixed mode linux-amd64 compressed oops)
    # Problematic frame:
    # V [libjvm.so+0x2333b2] markOopDesc::must_be_preserved_with_bias(oopDesc*) const+0x32
    # If you would like to submit a bug report, please visit:
    # http://java.sun.com/webapps/bugreport/crash.jsp
    --------------- T H R E A D ---------------
    Current thread (0x00000000523b3800): VMThread [stack: 0x0000000041676000,0x0000000041777000] [id=21727]
    siginfo:si_signo=SIGSEGV: si_errno=0, si_code=1 (SEGV_MAPERR), si_addr=0x00000000000027f1
    Registers:
    RAX=0x0000000000000000, RBX=0x00000000da14a050, RCX=0x0000000000000000, RDX=0x0000000000002741
    RSP=0x00000000417755e0, RBP=0x00000000417755e0, RSI=0x00000000da14a050, RDI=0x00000000e00a6368
    R8 =0x00002ad2f2bdfbc0, R9 =0x00000000e00c0d30, R10=0x0000000000000003, R11=0x0000000000000012
    R12=0x00000000da939ffc, R13=0x00000000e00a6368, R14=0x00000000e00c0d50, R15=0x00000000da93a004
    RIP=0x00002ad2f23703b2, EFLAGS=0x0000000000010206, CSGSFS=0x0000000000000033, ERR=0x0000000000000004
    TRAPNO=0x000000000000000e
    Register to memory mapping:
    RAX=0x0000000000000000 is an unknown value
    RBX=
    [error occurred during error reporting (printing register info), id 0xb]
    Stack: [0x0000000041676000,0x0000000041777000], sp=0x00000000417755e0, free space=1021k
    Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
    V [libjvm.so+0x2333b2] markOopDesc::must_be_preserved_with_bias(oopDesc*) const+0x32
    V [libjvm.so+0x4b26fd] instanceKlass::oop_follow_contents(oopDesc*)+0x1dd
    V [libjvm.so+0x69dc5b] MarkSweep::follow_stack()+0x7b
    V [libjvm.so+0x69ea78] void MarkSweep::follow_root<oopDesc*>(oopDesc**)+0xa8
    V [libjvm.so+0x69da7c] MarkSweep::FollowRootClosure::do_oop(oopDesc**)+0xc
    V [libjvm.so+0x8366b6] Universe::oops_do(OopClosure*, bool)+0x26
    V [libjvm.so+0x78971a] SharedHeap::process_strong_roots(bool, bool, SharedHeap::ScanningOption, OopClosure*, CodeBlobClosure*, OopsInGenClosure*)+0x2ca
    V [libjvm.so+0x46e7ed] GenCollectedHeap::gen_process_strong_roots(int, bool, bool, bool, SharedHeap::ScanningOption, OopsInGenClosure*, bool, OopsInGenClosure*)+0x7d
    V [libjvm.so+0x470e78] GenMarkSweep::invoke_at_safepoint(int, ReferenceProcessor*, bool)+0x1f8
    V [libjvm.so+0x47d8d6] OneContigSpaceCardGeneration::collect(bool, bool, unsigned long, bool)+0x86
    V [libjvm.so+0x8188bb] TenuredGeneration::collect(bool, bool, unsigned long, bool)+0x7b
    V [libjvm.so+0x46e0aa] GenCollectedHeap::do_collection(bool, bool, unsigned long, bool, int)+0x51a
    V [libjvm.so+0x38c2c5] GenCollectorPolicy::satisfy_failed_allocation(unsigned long, bool)+0xc5
    V [libjvm.so+0x46e71d] GenCollectedHeap::satisfy_failed_allocation(unsigned long, bool)+0x2d
    V [libjvm.so+0x86225d] VM_GenCollectForAllocation::doit()+0x5d
    V [libjvm.so+0x86fe9a] VM_Operation::evaluate()+0x4a
    V [libjvm.so+0x86f462] VMThread::evaluate_operation(VM_Operation*)+0x82
    V [libjvm.so+0x86f6d8] VMThread::loop()+0x198
    V [libjvm.so+0x86f1de] VMThread::run()+0x6e
    V [libjvm.so+0x71245f] java_start(Thread*)+0x13f
    VM_Operation (0x0000000043b73a70): GenCollectForAllocation, mode: safepoint, requested by thread 0x00000000547c4000
    --------------- P R O C E S S ---------------
    Java Threads: ( => current thread )
    0x0000000053cfd800 JavaThread "Java2D Disposer" daemon [_thread_blocked, id=22254, stack(0x00000000482c4000,0x00000000483c5000)]
    0x0000000055c76800 JavaThread "Thread-74" daemon [_thread_in_native, id=22253, stack(0x00000000483c5000,0x00000000484c6000)]
    0x0000000054768800 JavaThread "JPS UserRoleCacheCleaner<clean-only>" daemon [_thread_blocked, id=22216, stack(0x00000000486c8000,0x00000000487c9000)]
    0x000000005665b000 JavaThread "Thread-72" daemon [_thread_in_native, id=22215, stack(0x00000000485c7000,0x00000000486c8000)]
    0x0000000054e6f000 JavaThread "Thread-71" daemon [_thread_in_native, id=22214, stack(0x00000000484c6000,0x00000000485c7000)]
    0x0000000052dfa800 JavaThread "[STANDBY] ExecuteThread: '8' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon [_thread_blocked, id=22116, stack(0x00000000481c3000,0x00000000482c4000)]
    0x00002aaab471c000 JavaThread "Timer-15" daemon [_thread_blocked, id=22097, stack(0x00000000467a9000,0x00000000468aa000)]
    0x0000000056366000 JavaThread "org.apache.commons.vfs.cache.SoftRefFilesCache$SoftRefReleaseThread" daemon [_thread_blocked, id=22061, stack(0x00000000480c2000,0x00000000481c3000)]
    0x0000000053f20000 JavaThread "org.apache.commons.vfs.cache.SoftRefFilesCache$SoftRefReleaseThread" daemon [_thread_blocked, id=22060, stack(0x0000000047fc1000,0x00000000480c2000)]
    0x00000000566a0800 JavaThread "org.apache.commons.vfs.cache.SoftRefFilesCache$SoftRefReleaseThread" daemon [_thread_blocked, id=22059, stack(0x0000000047ec0000,0x0000000047fc1000)]
    0x0000000054afe000 JavaThread "org.apache.commons.vfs.cache.SoftRefFilesCache$SoftRefReleaseThread" daemon [_thread_blocked, id=22058, stack(0x0000000047dbf000,0x0000000047ec0000)]
    0x0000000054183800 JavaThread "org.apache.commons.vfs.cache.SoftRefFilesCache$SoftRefReleaseThread" daemon [_thread_blocked, id=22057, stack(0x0000000047cbe000,0x0000000047dbf000)]
    0x0000000056901800 JavaThread "org.apache.commons.vfs.cache.SoftRefFilesCache$SoftRefReleaseThread" daemon [_thread_blocked, id=22056, stack(0x0000000047bbd000,0x0000000047cbe000)]
    0x000000005661b800 JavaThread "org.apache.commons.vfs.cache.SoftRefFilesCache$SoftRefReleaseThread" daemon [_thread_blocked, id=22055, stack(0x0000000047abc000,0x0000000047bbd000)]
    0x0000000055000800 JavaThread "org.apache.commons.vfs.cache.SoftRefFilesCache$SoftRefReleaseThread" daemon [_thread_blocked, id=22054, stack(0x00000000479bb000,0x0000000047abc000)]
    0x00000000559aa800 JavaThread "org.apache.commons.vfs.cache.SoftRefFilesCache$SoftRefReleaseThread" daemon [_thread_blocked, id=22053, stack(0x00000000407e0000,0x00000000408e1000)]
    0x00000000546a5000 JavaThread "Timer-14" daemon [_thread_blocked, id=21942, stack(0x00000000468aa000,0x00000000469ab000)]
    0x00000000543d4800 JavaThread "Timer-13" daemon [_thread_blocked, id=21941, stack(0x0000000045fa1000,0x00000000460a2000)]
    0x0000000055e6e800 JavaThread "[STANDBY] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon [_thread_blocked, id=21940, stack(0x00000000478ba000,0x00000000479bb000)]
    0x00000000545b7000 JavaThread "DynamicListenThread[Default]" daemon [_thread_in_native, id=21939, stack(0x00000000477b9000,0x00000000478ba000)]
    0x0000000052772000 JavaThread "DynamicListenThread[Default[1]]" daemon [_thread_in_native, id=21938, stack(0x00000000476b8000,0x00000000477b9000)]
    0x0000000054fd1000 JavaThread "[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon [_thread_blocked, id=21937, stack(0x00000000475b7000,0x00000000476b8000)]
    0x00000000528f0800 JavaThread "[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon [_thread_blocked, id=21936, stack(0x00000000474b6000,0x00000000475b7000)]
    0x0000000054166800 JavaThread "weblogic.GCMonitor" daemon [_thread_blocked, id=21935, stack(0x00000000473b5000,0x00000000474b6000)]
    0x0000000054d78800 JavaThread "Thread-55" [_thread_blocked, id=21934, stack(0x00000000472b4000,0x00000000473b5000)]
    0x00002aaab4668800 JavaThread "Timer-12" daemon [_thread_blocked, id=21933, stack(0x0000000040e1b000,0x0000000040f1c000)]
    0x00002aaabd667000 JavaThread "org.apache.commons.vfs.cache.SoftRefFilesCache$SoftRefReleaseThread" daemon [_thread_blocked, id=21932, stack(0x00000000471b3000,0x00000000472b4000)]
    0x00002aaabde0e000 JavaThread "Timer-11" daemon [_thread_blocked, id=21931, stack(0x0000000040bf6000,0x0000000040cf7000)]
    0x00002aaabdf5d800 JavaThread "org.apache.commons.vfs.cache.SoftRefFilesCache$SoftRefReleaseThread" daemon [_thread_blocked, id=21929, stack(0x0000000040af5000,0x0000000040bf6000)]
    0x00002aaabdd5d000 JavaThread "Timer-10" daemon [_thread_blocked, id=21928, stack(0x000000004040d000,0x000000004050e000)]
    0x00002aaabdd24800 JavaThread "org.apache.commons.vfs.cache.SoftRefFilesCache$SoftRefReleaseThread" daemon [_thread_blocked, id=21927, stack(0x00000000470b2000,0x00000000471b3000)]
    0x00002aaabdc4f800 JavaThread "Timer-9" daemon [_thread_blocked, id=21926, stack(0x0000000046fb1000,0x00000000470b2000)]
    0x00002aaabdc93800 JavaThread "org.apache.commons.vfs.cache.SoftRefFilesCache$SoftRefReleaseThread" daemon [_thread_blocked, id=21925, stack(0x0000000046eb0000,0x0000000046fb1000)]
    0x00002aaabddcb000 JavaThread "Timer-8" daemon [_thread_blocked, id=21923, stack(0x0000000046daf000,0x0000000046eb0000)]
    0x00002aaabe138000 JavaThread "org.apache.commons.vfs.cache.SoftRefFilesCache$SoftRefReleaseThread" daemon [_thread_blocked, id=21922, stack(0x0000000046cae000,0x0000000046daf000)]
    0x00002aaabd925000 JavaThread "Timer-7" daemon [_thread_blocked, id=21921, stack(0x000000004030c000,0x000000004040d000)]
    0x00002aaabdadd000 JavaThread "org.apache.commons.vfs.cache.SoftRefFilesCache$SoftRefReleaseThread" daemon [_thread_blocked, id=21920, stack(0x0000000046bad000,0x0000000046cae000)]
    0x00002aaabdd77800 JavaThread "Timer-6" daemon [_thread_blocked, id=21919, stack(0x0000000040d15000,0x0000000040e16000)]
    0x00002aaabe11a000 JavaThread "org.apache.commons.vfs.cache.SoftRefFilesCache$SoftRefReleaseThread" daemon [_thread_blocked, id=21918, stack(0x0000000046aac000,0x0000000046bad000)]
    0x00002aaabdf0c000 JavaThread "Timer-5" daemon [_thread_blocked, id=21917, stack(0x00000000469ab000,0x0000000046aac000)]
    0x00002aaabe14f000 JavaThread "org.apache.commons.vfs.cache.SoftRefFilesCache$SoftRefReleaseThread" daemon [_thread_blocked, id=21916, stack(0x00000000409f4000,0x0000000040af5000)]
    0x00002aaabdf65800 JavaThread "Timer-4" daemon [_thread_blocked, id=21912, stack(0x00000000466a8000,0x00000000467a9000)]
    0x00002aaabdf92800 JavaThread "Timer-3" daemon [_thread_blocked, id=21911, stack(0x00000000465a7000,0x00000000466a8000)]
    0x00002aaabde85800 JavaThread "Timer-2" daemon [_thread_blocked, id=21910, stack(0x00000000464a6000,0x00000000465a7000)]
    0x00002aaabdf12800 JavaThread "Logger@297595244 3.6.0.4" daemon [_thread_blocked, id=21909, stack(0x0000000041211000,0x0000000041312000)]
    0x00002aaabdc24000 JavaThread "Thread-32" daemon [_thread_blocked, id=21906, stack(0x0000000045092000,0x0000000045193000)]
    0x00002aaabdd19000 JavaThread "CacheCleaner" daemon [_thread_blocked, id=21905, stack(0x00000000462a4000,0x00000000463a5000)]
    0x00002aaabd8a2800 JavaThread "Worker-2" daemon [_thread_blocked, id=21904, stack(0x00000000408f3000,0x00000000409f4000)]
    0x00002aaabdb96800 JavaThread "Worker-1" daemon [_thread_blocked, id=21903, stack(0x0000000041025000,0x0000000041126000)]
    0x00002aaab479e800 JavaThread "Worker-0" daemon [_thread_blocked, id=21902, stack(0x00000000463a5000,0x00000000464a6000)]
    0x00002aaabd924000 JavaThread "DmsThread-1" daemon [_thread_blocked, id=21896, stack(0x00000000461a3000,0x00000000462a4000)]
    0x0000000055b8e000 JavaThread "[STANDBY] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon [_thread_blocked, id=21895, stack(0x0000000045b9d000,0x0000000045c9e000)]
    0x00002aaab415d800 JavaThread "Thread-30" [_thread_blocked, id=21892, stack(0x0000000045ea0000,0x0000000045fa1000)]
    0x0000000053930000 JavaThread "LogFlusher" daemon [_thread_blocked, id=21821, stack(0x00000000460a2000,0x00000000461a3000)]
    0x0000000054500800 JavaThread "oracle.dfw.incident.FloodController" daemon [_thread_blocked, id=21817, stack(0x0000000045a9c000,0x0000000045b9d000)]
    0x0000000054e0f800 JavaThread "oracle.dfw.incident.IncidentCreatorThread" daemon [_thread_blocked, id=21816, stack(0x0000000045c9e000,0x0000000045d9f000)]
    0x0000000054dbc800 JavaThread "oracle.dfw.impl.incident - ADR Executor (created: Thu Feb 14 19:09:10 IST 2013)" daemon [_thread_blocked, id=21814, stack(0x0000000045d9f000,0x0000000045ea0000)]
    0x0000000054523800 JavaThread "LogFlusher" daemon [_thread_blocked, id=21809, stack(0x000000004599b000,0x0000000045a9c000)]
    0x000000005246b000 JavaThread "LogFlusher" daemon [_thread_blocked, id=21808, stack(0x000000004589a000,0x000000004599b000)]
    0x00000000552a9800 JavaThread "LogFlusher" daemon [_thread_blocked, id=21807, stack(0x0000000045799000,0x000000004589a000)]
    0x00000000527f8800 JavaThread "JPS FileChangeNotifier<clean-only>" daemon [_thread_blocked, id=21802, stack(0x0000000045698000,0x0000000045799000)]
    0x00000000548fc800 JavaThread "Thread-13" [_thread_blocked, id=21801, stack(0x0000000045597000,0x0000000045698000)]
    0x0000000054db7000 JavaThread "[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon [_thread_blocked, id=21800, stack(0x0000000045496000,0x0000000045597000)]
    0x0000000054403000 JavaThread "[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon [_thread_blocked, id=21799, stack(0x0000000045395000,0x0000000045496000)]
    0x0000000054463800 JavaThread "Runtime Authorization Event Notifier" daemon [_thread_blocked, id=21798, stack(0x0000000045294000,0x0000000045395000)]
    0x000000005281f000 JavaThread "JMX Framework document pooling thread" daemon [_thread_blocked, id=21797, stack(0x000000004020b000,0x000000004030c000)]
    0x0000000052845800 JavaThread "DoSManager" daemon [_thread_blocked, id=21795, stack(0x0000000045193000,0x0000000045294000)]
    0x000000005400d000 JavaThread "VDE Transaction Processor Thread" daemon [_thread_blocked, id=21793, stack(0x0000000044f91000,0x0000000045092000)]
    0x00000000546b7800 JavaThread "ExecuteThread: '1' for queue: 'weblogic.socket.Muxer'" daemon [_thread_blocked, id=21792, stack(0x0000000044e90000,0x0000000044f91000)]
    0x0000000053c67800 JavaThread "ExecuteThread: '0' for queue: 'weblogic.socket.Muxer'" daemon [_thread_in_native, id=21791, stack(0x0000000044d8f000,0x0000000044e90000)]
    0x0000000053d14000 JavaThread "[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon [_thread_blocked, id=21790, stack(0x0000000044c8e000,0x0000000044d8f000)]
    0x0000000053e5b800 JavaThread "weblogic.timers.TimerThread" daemon [_thread_blocked, id=21789, stack(0x0000000040f24000,0x0000000041025000)]
    0x0000000053d32800 JavaThread "weblogic.time.TimeEventGenerator" daemon [_thread_blocked, id=21788, stack(0x000000004010a000,0x000000004020b000)]
    0x00000000527d4000 JavaThread "ExecuteThread: '14' for queue: 'oms.automation'" daemon [_thread_blocked, id=21787, stack(0x0000000044b8d000,0x0000000044c8e000)]
    0x00000000527d2000 JavaThread "ExecuteThread: '13' for queue: 'oms.automation'" daemon [_thread_blocked, id=21786, stack(0x0000000044a8c000,0x0000000044b8d000)]
    0x00000000527d0000 JavaThread "ExecuteThread: '12' for queue: 'oms.automation'" daemon [_thread_blocked, id=21785, stack(   0x00000000529af000 JavaThread "ExecuteThread: '0' for queue: 'oms.automation'" daemon [_thread_blocked, id=21773, stack(0x0000000043d7f000,0x0000000043e80000)]
    0x0000000053382800 JavaThread "ExecuteThread: '14' for queue: 'oms.web'" daemon [_thread_blocked, id=21772, stack(0x0000000043c7e000,0x0000000043d7f000)]
    (0x0000000043779000,0x000000004387a000)]
    0x00000000547bd000 JavaThread "ExecuteThread: '0' for queue: 'oms.web'" daemon [_thread_blocked, id=21758, stack(0x0000000042e70000,0x0000000042f71000)]
    0x0000000053cd1800 JavaThread "ExecuteThread: '14' for queue: 'oms.xml'" daemon [_thread_blocked, id=21757, stack(0x0000000042d6f000,0x0000000042e70000)]
    Other Threads:
    =>0x00000000523b3800 VMThread [stack: 0x0000000041676000,0x0000000041777000] [id=21727]
    0x00000000523f2800 WatcherThread [stack: 0x0000000042062000,0x0000000042163000] [id=21734]
    VM state:at safepoint (normal execution)
    VM Mutex/Monitor currently owned by a thread: ([mutex/lock_event])
    [0x000000005235bef0] Threads_lock - owner thread: 0x00000000523b3800
    [0x000000005235c3f0] Heap_lock - owner thread: 0x00000000547c4000
    Heap
    def new generation total 157248K, used 157247K [0x00000000c0000000, 0x00000000caaa0000, 0x00000000caaa0000)
    eden space 139776K, 100% used [0x00000000c0000000, 0x00000000c8880000, 0x00000000c8880000)
    from space 17472K, 99% used [0x00000000c8880000, 0x00000000c998fff0, 0x00000000c9990000)
    to space 17472K, 0% used [0x00000000c9990000, 0x00000000c9990000, 0x00000000caaa0000)
    tenured generation total 349568K, used 349568K [0x00000000caaa0000, 0x00000000e0000000, 0x00000000e0000000)
    the space 349568K, 100% used [0x00000000caaa0000, 0x00000000e0000000, 0x00000000e0000000, 0x00000000e0000000)
    compacting perm gen total 275904K, used 275635K [0x00000000e0000000, 0x00000000f0d70000, 0x0000000100000000)
    the space 275904K, 99% used [0x00000000e0000000, 0x00000000f0d2cdd8, 0x00000000f0d2ce00, 0x00000000f0d70000)
    No shared spaces configured.
    Code Cache [0x00002aaaab041000, 0x00002aaaace01000, 0x00002aaaae041000)
    total_blobs=8666 nmethods=7459 adapters=1158 free_code_cache=19457344 largest_free_block=19712
    VM Arguments:
    jvm_args: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=OSM72AdminServer -Djava.security.policy=/app/WLS11g_OSM72/Middleware/wlserver_10.3/server/lib/weblogic.policy -Xverify:none -da -Dplatform.home=/app/WLS11g_OSM72/Middleware/wlserver_10.3 -Dwls.home=/app/WLS11g_OSM72/Middleware/wlserver_10.3/server -Dweblogic.home=/app/WLS11g_OSM72/Middleware/wlserver_10.3/server -Dcommon.components.home=/app/WLS11g_OSM72/Middleware/oracle_common -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=/app/WLS11g_OSM72/Middleware/user_projects/domains/OSM72_BASE_DOMAIN -Djrockit.optfile=/app/WLS11g_OSM72/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrocket_optfile.txt -Doracle.server.config.dir=/app/WLS11g_OSM72/Middleware/user_projects/domains/OSM72_BASE_DOMAIN/config/fmwconfig/servers/OSM72AdminServer -Doracle.domain.config.dir=/app/WLS11g_OSM72/Middleware/user_projects/domains/OSM72_BASE_DOMAIN/config/fmwconfig -Digf.arisidbeans.carmlloc=/app/WLS11g_OSM72/Middleware/user_projects/domains/OSM72_BASE_DOMAIN/config/fmwconfig/carml -Digf.arisidstack.home=/app/WLS11g_OSM72/Middleware/user_projects/domains/OSM72_BASE_DOMAIN/config/fmwconfig/arisidprovider -Doracle.security.jps.config=/app/WLS11g_OSM72/Middleware/user_projects/domains/OSM72_BASE_DOMAIN/config/fmwconfig/jps-config.xml -Doracle.deployed.app.dir=/app/WLS11g_OSM72/Middleware/user_projects/domains/OSM72_BASE_DOMAIN/servers/OSM72AdminServer/tmp/_WL_user -Doracle.deployed.app.ext=/- -Dweblogic.alternateTypesDirectory=/app/WLS11g_OSM72/Middleware/oracle_common/modules/oracle.ossoiap_11.1.1,/app/WLS11g_OSM72/Middleware/oracle_common/modules/oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=/app/WLS11g_OSM72/Middleware/patch_wls1035/profiles/default/sysext_manifest_classpath:/app/WLS11g_OSM72/Middleware/patch_jdev1111/profiles/default/sysext_manifest_classpath -Dweblogic.client.socket.ConnectionTimeout=500 -Dcom.mslv.oms.cartridgemgmt.DeployCartridgeMDB.CartridgeDeploymentTransactionTimeout=2000
    java_command: weblogic.Server
    Launcher Type: SUN_STANDARD
    Environment Variables:
    JAVA_HOME=/usr/java/jdk1.6.0_37
    CLASSPATH=/app/WLS11g_OSM72/Middleware/oracle_common/modules/oracle.jdbc_11.1.1/ojdbc6dms.jar:/app/WLS11g_OSM72/Middleware/patch_wls1035/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/app/WLS11g_OSM72/Middleware/patch_jdev1111/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/usr/java/jdk1.6.0_37/lib/tools.jar:/app/WLS11g_OSM72/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/app/WLS11g_OSM72/Middleware/wlserver_10.3/server/lib/weblogic.jar:/app/WLS11g_OSM72/Middleware/modules/features/weblogic.server.modules_10.3.5.0.jar:/app/WLS11g_OSM72/Middleware/wlserver_10.3/server/lib/webservices.jar:/app/WLS11g_OSM72/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/app/WLS11g_OSM72/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/app/WLS11g_OSM72/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrf.jar:/app/WLS11g_OSM72/Middleware/wlserver_10.3/common/derby/lib/derbyclient.jar:/app/WLS11g_OSM72/Middleware/wlserver_10.3/server/lib/xqrl.jar
    PATH=/app/WLS11g_OSM72/Middleware/wlserver_10.3/server/bin:/app/WLS11g_OSM72/Middleware/modules/org.apache.ant_1.7.1/bin:/usr/java/jdk1.6.0_37/jre/bin:/usr/java/jdk1.6.0_37/bin:/usr/java/jdk1.6.0_37/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin:/usr/java/jdk1.6.0_37/bin:/root/bin
    LD_LIBRARY_PATH=/usr/java/jdk1.6.0_37/jre/lib/amd64/server:/usr/java/jdk1.6.0_37/jre/lib/amd64:/usr/java/jdk1.6.0_37/jre/../lib/amd64:/app/WLS11g_OSM72/Middleware/patch_wls1035/profiles/default/native:/app/WLS11g_OSM72/Middleware/patch_jdev1111/profiles/default/native:/app/WLS11g_OSM72/Middleware/wlserver_10.3/server/native/linux/x86_64:/app/WLS11g_OSM72/Middleware/wlserver_10.3/server/native/linux/x86_64/oci920_8
    SHELL=/bin/bash
    Signal Handlers:
    SIGSEGV: [libjvm.so+0x861ea0], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
    SIGBUS: [libjvm.so+0x861ea0], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
    SIGFPE: [libjvm.so+0x70fc60], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
    SIGPIPE: [libjvm.so+0x70fc60], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
    SIGXFSZ: [libjvm.so+0x70fc60], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
    SIGILL: [libjvm.so+0x70fc60], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
    SIGUSR1: SIG_DFL, sa_mask[0]=0x00000000, sa_flags=0x00000000
    SIGUSR2: [libjvm.so+0x712a90], sa_mask[0]=0x00000000, sa_flags=0x10000004
    SIGHUP: SIG_IGN, sa_mask[0]=0x00000000, sa_flags=0x00000000
    SIGINT: [libjvm.so+0x712690], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
    SIGTERM: [libjvm.so+0x712690], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
    SIGQUIT: [libjvm.so+0x712690], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
    --------------- S Y S T E M ---------------
    OS:Red Hat Enterprise Linux Server release 5.7 (Tikanga)
    uname:Linux 2.6.18-274.el5 #1 SMP Mon Jul 25 13:17:49 EDT 2011 x86_64
    libc:glibc 2.5 NPTL 2.5
    rlimit: STACK 10240k, CORE 0k, NPROC 25079, NOFILE 1024, AS infinity
    load average:1.37 0.45 0.32
    /proc/meminfo:
    MemTotal: 3152644 kB
    MemFree: 13224 kB
    Buffers: 49684 kB
    Cached: 1494336 kB
    SwapCached: 43764 kB
    Active: 2130560 kB
    Inactive: 796056 kB
    HighTotal: 0 kB
    HighFree: 0 kB
    LowTotal: 3152644 kB
    LowFree: 13224 kB
    SwapTotal: 8193140 kB
    SwapFree: 8030056 kB
    Dirty: 1688 kB
    Writeback: 0 kB
    AnonPages: 1338848 kB
    Mapped: 553060 kB
    Slab: 124644 kB
    PageTables: 56400 kB
    NFS_Unstable: 0 kB
    Bounce: 0 kB
    CommitLimit: 9769460 kB
    Committed_AS: 3156696 kB
    VmallocTotal: 34359738367 kB
    VmallocUsed: 266424 kB
    VmallocChunk: 34359471699 kB
    HugePages_Total: 0
    HugePages_Free: 0
    HugePages_Rsvd: 0
    Hugepagesize: 2048 kB
    CPU:total 1 (1 cores per cpu, 1 threads per core) family 15 model 47 stepping 2, cmov, cx8, fxsr, mmx, sse, sse2, sse3, mmxext, 3dnowpref
    /proc/cpuinfo:
    processor     : 0
    vendor_id     : AuthenticAMD
    cpu family     : 15
    model          : 47
    model name     : AMD Athlon(tm) 64 Processor 3200+
    stepping     : 2
    cpu MHz          : 2000.000
    cache size     : 512 KB
    fpu          : yes
    fpu_exception     : yes
    cpuid level     : 1
    wp          : yes
    flags          : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow up pni lahf_lm
    bogomips     : 3979.78
    TLB size     : 1024 4K pages
    clflush size     : 64
    cache_alignment     : 64
    address sizes     : 40 bits physical, 48 bits virtual
    power management: ts fid vid ttp tm stc
    Memory: 4k page, physical 3152644k(13224k free), swap 8193140k(8030056k free)
    vm_info: Java HotSpot(TM) 64-Bit Server VM (20.12-b01) for linux-amd64 JRE (1.6.0_37-b06), built on Sep 24 2012 11:47:45 by "java_re" with gcc 3.2.2 (SuSE Linux)
    time: Thu Feb 14 21:26:33 2013
    elapsed time: 8278 seconds

    The only fix I know of for this issue is to reboot the host.
    If there is another fix someone please let me know as I have users who run into this often.
    Thanks
    Bonnie.Partridge

  • Error HKEY_LOCAL_MACHINE\SOFTWARE\Javasoft\Java Runtime Environment 1.5.0_0

    I have an ongoing frustrating problem. Java has stopped working on my pc. When I go to the java icon and open I get error "The system cannot find the registry key HKEY_LOCAL_MACHINE\SOFTWARE\Javasoft\Java Runtime Environment 1.5.0_06" If I try to uninstall update 6 from xp service pack 2 add and remove programs I get the error "error applying transforms. Verify that the spedcified transform paths are valid" If I try to remove update 1, it errors "You already have this version of the Jre installed. Please uninstall the product through your add/remove programs utility before reinstalling". If I hit the OK button, I get "Fatal error during installation" (even though I am trying to uninstall)
    I am very frustrated as I cannot find anything on the website to assist, and my son is going spare not being able to play runescape! Please Help
    Trompy

    As a possible workaround try offline installation which can be from:
    http://java.sun.com/javase/downloads/index.jsp
    At the same time, if the above workaround fails the exercise is little complex. If you have tried downloading update 1.5.0_xx, then likely a .msi file is saved in the location as mentioned below:
    Possible path:
    C:\Documents and Settings\username\Application Data\Sun\Java\jre1.5.0_xx
    Note: This is irrespective of installation failure or success. Replace xx with the correct version you are trying to install
    There is also a bug filed where you can submit useful information to help finding regular solution to this issue:
    http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6542954

  • Keep getting an error message that I need to download Java Runtime Environment

    I have a one year old iMac and just downloaded OS 10.10 (Yosemite).  Since doing this 2 weeks ago, I keep getting the same error message telling me that I need to download Java Runtime Environment in order for the webpage to run properly.  I have downloaded, installed and checked the installation 3x already.  The message goes away for a day or two and then returns.
    Any idea on what I have not done correctly or need to do further?
    Thanks for your he

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.fpsaud com.apple.AirPortBaseStationAgent com.apple.installer.osmessagetracing ' ' 1274181950 464843899 1233118628 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i];if(n<10) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i]".plist";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' '/\./p' '/\.appex\/Contents\/Info\.plist$/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:|suhel| VALI|ver-r|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" 'L*/P*/com.ap*.p*.ext*.*.*t -exec '"${c1[14]}"' :displayOrder" {} \;' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors appexes );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 4 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Java runtime 6 (crazy) install problem - OS X 10.7.5

    Hello everyone,
    I have been reading the various threads on this issue, but found no answer to my problem:
    I am under Lion version 10.7.5 - MacBookPro
    I need Java 6 for a program I use for my work.
    When I want to install from Java Preferences, i get the following message:
    "To open “Java Preferences,” you need to install a Java SE 6 runtime, but you are not connected to the Internet." But I AM connected to the internet.
    Accroding to waht I read, I went to the Apple download files and downloaded JavaForOSX.dmg file...
    But when I want to install it, I get the message:
    "Alert: A newer version of this package is already installed."
    When I run terminal java -version
    The answer is "No Java runtime present, requesting install."
    And thus I am back to where I started...
    If you could help that would be incredibly helpful!
    Thanks
    Helene

    MadMAC0 posted at https://discussions.apple.com/message/20107182?ac_cid=tw123456#20107182 that:
    Apple has posted (10/22/12) the approved solution for restoring the Java 6 plug-in:
    Java for OS X 2012-006: How to re-enable the Apple-provided Java SE 6 applet plug-in and Web Start functionality.

  • [Solved] Pacman fails to satisfied java-runtime dependency on upgrade

    Hi. So I haven't been able to upgrade yesterday or today because of this bug. I couldn't figure out how to solve it on my own.
    This is what happens when I try to upgrade:
    jake@levi> sudo pacman -Syyu ~
    :: Synchronizing package databases...
    core 104.8 KiB 76.7K/s 00:01 [##################################################################################################] 100%
    extra 1389.5 KiB 187K/s 00:07 [##################################################################################################] 100%
    community 1549.8 KiB 191K/s 00:08 [##################################################################################################] 100%
    multilib 89.7 KiB 145K/s 00:01 [##################################################################################################] 100%
    :: Starting full system upgrade...
    resolving dependencies...
    looking for inter-conflicts...
    error: failed to prepare transaction (could not satisfy dependencies)
    :: languagetool: requires java-runtime>=6
    :: rhino: requires java-runtime
    I have jre7-openjdk-headless already installed, which provides java-runtime 7, so I don't see why I could be running into any problems.
    [1] jake@levi> pacman -Qi jre7-openjdk-headless ~
    Name : jre7-openjdk-headless
    Version : 7.b147_2.1-1
    URL : http://icedtea.classpath.org
    Licenses : custom
    Groups : None
    Provides : java-runtime=7
    Depends On : libjpeg-turbo lcms2 nss ca-certificates-java rhino
    Optional Deps : libcups: needed for Java Mauve support - libmawt.so
    fontconfig: needed for Java Mauve support - libmawt.so
    Required By : languagetool rhino
    Conflicts With : java-runtime openjdk6
    Replaces : None
    Installed Size : 107421.00 KiB
    Packager : Andreas Radke <[email protected]>
    Architecture : x86_64
    Build Date : Wed Feb 15 06:36:20 2012
    Install Date : Thu Mar 1 14:06:19 2012
    Install Reason : Installed as a dependency for another package
    Install Script : Yes
    Description : Free Java environment based on OpenJDK 7.0 with IcedTea7 replacing binary plugs - Minimal Java runtime - needed for executing non GUI Java programs
    There could be something I don't understand though. Any help is appreciated.
    Last edited by Coward (2012-03-08 00:30:57)

    mira wrote:
    Karol's advice did not worked for me, so I did this:
    pacman -Rdd jre7-openjdk-headless
    and after that this:
    pacman -S jre7-openjdk
    and then the update worked as it should. Hope that helps somebody.
    Not sure what was the issue in your case, but I did say "Try to ignore the conflicts and see if it works out." and by that I meant the '-dd' switch.
    Now I see I should have been explicit about it as my comment doesn't make it clear at all.

  • Installing Latest Java Runtime

    I'm running OS X 10.10.2 and want to update my Java runtime to the latest (Java SE Runtime Environment 8u31), since the one installed (1.6 as below) is very old and may have exploitable flaws:
    Java(TM) SE Runtime Environment (build 1.6.0_65-b14-466.1-11M4716)
    Java HotSpot(TM) 64-Bit Server VM (build 20.65-b04-466.1, mixed mode)
    However, I recall that installing the latest had caused Adobe Photoshop to stop working and hence I had to install the above distribution from Apple instead. My question is:
    Has anybody running the latest Java runtime seen any issues with their Photoshop or Minecraft (or any other software) installations?
    And, if I upgrade to the latest, should I uninstall the older 1.6 version completely, to prevent any possible security holes from being exploited or would I need the older version too, for compatibility or anything else?
    Thank you.

    FWIW, both JREs can exist without any issues and there's no need to remove them or any other Java components that are installed when installing OSX. Just leave them in place and worry about other things.
    Do note that when installing OSX, only the JRE isn't installed; all the other Java components are installed.
    27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10.2), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

  • Java Runtime Environment

    Hello,
    A window often pops up on the screen of my Macbook, asking (I translate as I can from french):
    " to show this web content, install the environment Java Runtime Environment."
    What can I do? How can I get rid of it?
    Thanks for your help.
    Antoine

    LexSchellings wrote:
    …but also on the reasons why apple first saw it necessaray to make its own Java releases, but also on what is - I think - consensus on the net.
    Consensus is usually wrong. As for why Apple did it, here's something from someone who knows the history.
    "Originally, Sun developed Java and supported it for all platforms except OS X. Since Sun did not develop and support a JRE for OS X, Apple stepped in and did the ports. At the time, it appeared that Java was going to be an important development language for client side applications as well as browser embedded applets. In fact, many applications were developed in Java as that was essentially the only language that allowed a single binary to run on multiple platforms. Apple also did not fully integrate the JRE, so on the Macintosh Java also had some rather serious performance issues.
    "As Java faded as a development language for client applications and moved to being a server side language on Linux and BSD boxes, Apple pulled development resources from the OS X port. Later, even some the integration components allowing a more Mac like GUI were dropped. (Note that Java has been very successful for developing Android applications, where the Google JRE has extensive optimizations and a very good JIT. {Yes, I know about Dalvik - the point stands that a proper JRE can have very good performance even if Google uses a modified byte code.})
    "With Oracle's purchase of Sun, Oracle decided to commit resources to the OS X port of the JRE and JDK. Apple no longer needs to do this port to maintain platform parity; hence Apple no longer supplies the JRE. However, it does still supply some of the integration components that Oracle uses in their ports of Java for OS X."

  • Java Runtime Environment (JRE) version 1.6 is not supported by this driver"

    Goal: create new ODI install in testlab on single server
    Installer: ODI newbie
    Server Software Installed: all 32-bit
    Windows 2008
    sql 2008
    JDK 1.6_22
    sqljdbc4.jar (downloaded from Microsoft's site)
    No weblogic server installed
    Issue: Using ODI Studio to create Master Repository. Jar files and config described below already implemented. When press “Test Connection ” in ODI Studio I get this error: : “Java Runtime Environment (JRE) version 1.6 is not supported by this driver. Use the sqljdbc4.jar class library, which provides support for JDBC 4.0"
    Details:
    (Sqljdbc.jar and) Sqljdbc4.jar downloaded from here:
    http://www.microsoft.com/downloads/en/details.aspx?FamilyID=99b21b65-e98f-4a61-b811-19912601fdc9&displaylang=en
    (Sqljdbc.jar and ) Sqljdbc4.jar placed in C:\Users\Administrator\AppData\Roaming\odi\oracledi\userlib directory
    Repository Connection Details:
         Technology: Microsoft SQL Server
         JDBC driver: com.microsoft.sqlserver.jdbc.SqlServerDriver
         JDBC URL : jdbc:sqlserver://ODI:1433;SelectMethod=cursor
         User : odi
    What am I doing wrong? TIA.

    More details:
    ODI = ODI version 11.1.1.3
    SQL Server uses default install options.

  • Current best practice with Java Runtime?

    I'd rather just live without Java Runtime, but it looks like one of my kids needs it for a school website.  I guess I have to install it and educate/monitor everyone on using and disabling it.  On a machine with multiple user accounts can it be enabled/disabled on a machine wide global basis, or is it only on a user/browser-preferences level?  What complications are there, if any with multiple users?  I assume it helps to be browsing in a non-admin account?

    It's been enabled on all my OSs and I suffer no issues. You could use if for the school app and then disable it in Safari's prefs if you're really worried about it.

  • Java Cache Issue on SAP MII 12.1 SP09 (Build 116)

    Hi All,
    Has anybody experienced this issue before?
    Problem Description
    This installation is a central MII instance, which is HP hosted in Swindon, UK. On Login we are experiencing a delay in loading the Java Applets, i.e. iGrids, iCharts, iCommands etc. After the first screen load the performance improves. When we close the session and re-enter, the performance on the first screen is delayed.
    Problem Investigation
    We have compared this project to other MII instances and investigated the cache loading of each of the MII installations. What we have noticed is that the Java is not being cached on the client side for the MII server V12.1 SP09 (Build 116). We had three MII servers, with this version, and we are experiencing the same issue. We have other instances of version 12.1.7, 12.1.8, and 12.2.0 and the cache functionality is working fine.
    To view the cache we are opening the Java Cache viewer on the Java Control Panel, and we are looking for the file u201Cillum8.zipu201D which is the MII Java library. This investigation was done using the same Client Java Runtime version and IE Version.
    Software Versions used: JavaRuntime version: 1.0.6_22 & Internet Explorer 8.0
    Any advice/help much appreciated.
    Regards,
    Henry

    Hi Henry,
    Not sure this has any bearing, but what NW version and SP is MII sitting on top of?
    Thanks,
    Mike

  • Error initializing Java Runtime Environment

    "Error initializing Java Runtime Environment. You may need to
    re-install Flash"
    Has anyone else been getting this error message?
    Re-installing is a problem because I work in a HUGE company
    with LOTS of red tape and I don't have access to the original disks
    to re-install.
    I can't even load my file anymore without getting the error
    and once opened, I can't even do a "check script" without getting
    the error. I've even tried to load earlier versions but I'm still
    getting it!
    Any workaround or am I doomed to wait for an IT guy to show
    up in a day or two?
    "Deadlines? WHAT DEADLINES??!!"

    I have been experiencing this unpleasant phenomenom also, appears that we aren't the only ones.... have you had any success in resolving this issue? I am just starting the process of working through the error message and any information would be appreciated.
    The tech Adobe support was not helpful and suggested using these forums.

Maybe you are looking for

  • Error Involving EDU.oswego.cs.dl.util.concurrent.ConcurrentReaderHashMap

    The JVM is crashing and I am getting the following error. I am having a hard time getting started figuring out why this is happening. I am not using this method directly and am having a hard time figuring out what is leading to this. In Eclipse when

  • Error when uppload a employee pic

    Hi folks (sorry for my English): I have a trouble, because it’s necessary to show the photo associated to a specific employee, using Portal. First, I need to upload the images, and for that reason I’m using the ArchiveLink… All the step, were develop

  • Exporting DV AVI Type 2

    So here is the quick rundown... I work at a small community cable television station. The system we use to cable-cast is windows based and plays Microsoft DV AVI files. The systems we edit with are G5's running the latest Final Cut Studio. After goin

  • Replaced font still appearing in missing fonts

    Hi All, In my FrameMaker template I was missing a font called "Palatino". I changed the font in the template to another font that is available with me. I changed the font in every Paragraph tag and Character tag in the template. And did Global Update

  • Substracting number of days from date

    Hi all, I need to create a user exit to get a date value based on another variable. Basically, 100 days minus the first variable. var2 = var1 - 100 How can I write this? Thanks.