JavaFX 2.0 extend Node or Group

Hi,
I don't wont to code everyting in one class, but I can't extend the group class. So which class do I have to extend and code some animations within? I'd like to instance this class in the Main Class, which extends the application.
Thanks.

Ok, I imported the wrong package...
I can extend the Group class.

Similar Messages

  • ?Is it possible to create a javafx class without extending Application class ? If yes, how

    Is it possible to create a javafx class without extending Application class ? If yes, how ?

      There is no  such thing as a javafx  class.  It is a regular  java class.  The Aapplication class is  the entry
    point  for JavaFX application.  You have to extend the Application class to create Javafx  application .

  • Best Practice: Application runs on Extend Node or Cluster Node

    Hello,
    I am working within an organization wherein the standard way of using Coherence is for all applications to run on extend nodes which connect to the cluster via a proxy service. This practice is followed even if the application is a single, dedicated JVM process (perhaps a server, perhaps a data aggregater) which can easily be co-located with the cluster (i.e. on a machine which is on the same network segment as the cluster). The primary motivation behind this practice is to protect the cluster from a poorly designed / implemented application.
    I want to challenge this standard procedure. If performance is a critical characteristic then the "proxy hop" can be eliminated by having the application code execute on a cluster node.
    Question: Is running an application on a cluster node a bad idea or a good idea?

    Hello,
    It is common to have application servers join as cluster members as well as Coherence*Extend clients. It is true that there is a bit of extra overhead when using Coherence*Extend because of the proxy server. I don't think there's a hard and fast rule that determines which is a better option. Has the performance of said application been measured using Coherence*Extend, and has it been determined that the performance (throughput, latency) is unacceptable?
    Thanks,
    Patrick

  • OutOfMemoryError in TCP Extend nodes?

    Hi,
    We are facing a starnge issue in which a storage disabled tcp extend node is consistently occupying around 450mb of space?
    Whenever we populate data in cache even smaller than 40mb the it starts filling up oblivious space in tcp extend nodes. Although the jmx console doesn't provide any details of data residing in the storage disabled extend nodes.
    Ideally how much memory does the extend node storage disabled tcp extend node requires to run? Is it propotional to max amount of data loaded as a single unit. I feel the extend node should hold data for short duration and should free itself.
    We are running on DGE cluster with 2 linux machines having 11 cache nodes of 1gb each. Each machine has 2 storage disabled Extend nodes with 500m each through which my client connects.
    Thanks
    -Amit
    Message was edited by:
    Rock Solid

    Is there any standard way of deciding on the space required by Extend TCP nodes (Storage Disabled)?
    In my scnario
    We are trying to get a Map Object of 42mb from the cache. The TCP extend node to which the client connects is throwing OutOfMemoryError. We are runing 4 Extend Nodes of 600MB each.
    By looking at the JMX console AvailableMB is < 200 MB consistently in Extend TCP Node (Storage disabled).
    Why is this Memory not released after the data transfer is done?
    Thanks
    -Amit

  • NDP - Solicited node multicast group

    Hello everyone,
    I can`t understand the process of layer3 to layer2 address resolution in IPv6.
    In order to make a Layer-2 (eg. Ethernet) delivery, it needs to know the target host's hardware address (eg. "Ethernet MAC address"). But in order to do this, it must first determine which hardware address to send it to. To do this, an IPv6 host will construct the Solicited-node Multicast Address related to the target address.
    The IPv6 solicited-node multicast address has the prefix FF02:0:0:0:0:1:FF00:0000/104 concatenated with the 24 low-order bits of a corresponding IPv6 address.
    For the target with address
    fe80::2aa:ff:fe28:9c5a
    solicated node multicast address would become
    ff02::1:ff28:9c5a.
    1- For example when a host has two unicast address 2001::AB:CDEA and link local fe80:2aa:ff:fe28:9c5a on its interface, does it join the associated solicited-node multicast group for every address to which it is assigned or only for link local adress?.
    2- If only for link local address, how will the source device know the link local address of target to borrow last 24 bit? Can I use global address for target address while layer3 to layer2 address resolution?
    3- Does all ND functions use link local address? Must a node know all neighbours link local address? If yes, what mechanism are needed to learn link local address of neighbours.
    All replies will be appreciated.
    Thanks
    Gokmen...

    Hi,
    1) a node always joins the sollicited-node multicast for every IPv6 address it has configured on the ethernet interface including the link-local.
    2) this destination multicast address is used for neighbour sollicitation( equivalent of ARP in IPv4) and DAD( duplicate address detection) which is the equivalent of Gratuitous ARP request in IPv4.
    So when you want to communicate with a destination IPv6 address it must first do a NS to find out the L2 address and it will send it to the sollicited-node multicast corresponding to the IPv6 destination address
    when the node is configured with an IPv6 address it will verify if it is unique by sending a NS to its sollicited-node multicast and if it receives a reply it considers the address is not unique.
    3) no it must know how to send to link-local if it wants to communicate with link-local only
    http://www.ietf.org/rfc/rfc2461.txt
    Regards.
    Alain

  • Adding Linux extended nodes to Qmaster from Ubuntu machines

    I realize this is both a complicated question and for some might be seen as a really easy question. I'm hoping for more the latter!
    I have a Mac Mini hooked up to a network switch and I plug in my MacBook to set up a very basic cluster through Qmaster. It's the only way i can get jobs done in Compressor, neither of these machines have the specs suggested to really run Final Cut Studio at all, but this is a church and we just appreciate what we have.
    In that same spirit, we have an old Dell PowerEdge 700 server I put Ubuntu Studio on running at 256 megs ram and about 2.8 Ghz. A Dell Inspiron 8200 laptop at 1.8 GHZ with 512 ram, and 4 Dell Optiplex with 256 RAM at 1GHZ. All old equipment I realize, but from what I've read it sounds like one can use these in Apple Qmaster as long as they are Unix based. So I've been installing Ubuntu on them (I'm a Linux newbie and the other distros are a pain to install on these machines.)
    From what I understand, you put a UNIX system (like Ubuntu) on these, setup something like OpenSSH, and of course I have them plugged into the network switch with my macs.
    The macs see each other and can create a cluster.
    I setup a Linux box and it could see the mac through the terminal.
    But the mac doesn't see the Linux box through terminal.
    (Of course I'm new to terminal too.)
    I opened up everything on the system preferences side for the mac for sharing services, no firewall setup, ect. I have a feeling there are a multitude of SSH things I have to set up on mac and linux that I just am unaware of.
    I go to system preferences _ qmaster _ and try to set up extended nodes with the Mac Mini as an intermediary node (before anyone posts it, yes I've studied the Qmaster manual laboriously.) Where you type in hostname, username, and password, I've been typing in "ubuntustudio" as my hostname because that's what I set it up as when installing. I also set that as username. But every example I see posted lists the username with something like a domain name after it. I think maybe I'm not typing the hostname correctly or something, but I can't find any documentation on naming conventions for something like this.
    Sorry if I sound like a newbie, on some of this I am. But our pc techs don't cover the linux machines under our contract, I'm sure Apple would charge me a ton if they were willing to help with this at all, and every support article I have found vaguely mentions that you CAN use SSH to add non-macs to the cluster, but just takes it as a given that you'll know exactly how to input the hostname and that it will work and all your setting will be perfect.
    I just think with 6 machines running over 1ghz, collectively they could be a descent set of nodes and it just seems best practice to repurpose old equipment to death before buying new.
    Thanks for your time

    Thanks so much for your response!
    I tried just typing in the ip addresses but to no avail. This was on an Airport Extreme and I'm going to try again on a network switch that has no internet connection. I'll post back here if it works. I don't think I have any firewall or anything that should be actively blocking on Ubuntu or Mac side but I wonder if there is something I should be unlocking that I haven't thought of.
    If I have any success I'll let you know!
    Oh this is latest version of Ubuntu Studio and Mac OSX btw.

  • All objects property node and grouped objects

    Hi
    I am trying to position a the objects on my GUI in the centre of the screen using property nodes. However, I do not want to have to have a property node for every decoration, image and control. Is there a way that I can group all the objects and then use a property node to position them? I have tried using the all objects property node but none of the indexes seems to apply to my group of objects.
    Help please!
    Many thanks.
    John
    p.s. i have uploaded my test vi's. The chart, decoration and exit button have been grouped. use the control on check.vi to set the object to move. 
    Solved!
    Go to Solution.
    Attachments:
    check.vi ‏13 KB
    run.vi ‏13 KB

    Tab pages are a nice way to group GUI objects.
    Instead of using a decoration,
    use a tab control
    Remove all but the first tab
    Hide the tab
    Set the proprties of the tab control and the control on that page will move, hide, show along with the tab control.
    I hope that helps,
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Bex Analyzer 7.0, Filter on Hierarchy Node (Text Group)

    Hi gurus,
    I would be glad if anyone of you could help me with this issue.
    I made an application with Bex Analyzer 7.0 which does following -> create certain combinations and copy it directly into PowerPoint as a picture. This works great, I can send you the code if you want to. I could even create a blog or wiki ...
    My issue appears when I try to copy a value for hierarchy node into Filter in Bex. It is possible to write into Filter some value and the system sets a filter with this value, there is no doubt about it. But I wanted to filter on a whole hierarchy node. I'm not able to do this by copying the value into the line. With the context menu no problem.
    Example 1:(works fine)
    Characteristics    Filter:
    0comp_code       1000
    Example 2:(doesn't work)
    Characteristics    Filter:
    0comp_code       +Group1(Text Node)
    I will appreciate any kind of help.
    Thank you
    Standa

    As promissed, here is the code with which we export graphics into powerpoint.
    BEx Analyzer 7.0
    Following scenario -> user defines combinations in the list, what should be exported (area "D39:D142") Macro copies selections into filter area (D22).
    Sub Chart2PPT()
        Dim objPPT As Object
        Dim objPrs As Object
        Dim objSld As Object
        Dim shtTemp As Object
        Dim chtTemp As ChartObject
        Dim objShape As Shape
        Dim objGShape As Shape
        Dim intSlide As Integer
        Dim blnCopy As Boolean
        Dim i As Integer
        Dim f As Integer 
        Set objPPT = CreateObject("Powerpoint.application")
        objPPT.Visible = True
        objPPT.Presentations.Add
        objPPT.ActiveWindow.ViewType = 1 'ppViewSlide
        For Each cell In Range("D39:D142")
    If Cells(i, 4) = "" Then Exit Sub
    If Len(Cells(i, 4).Value) < 1 Then Exit Sub
        Cells(22, 4) = Cells(i, 4) 
        For Each shtTemp In ThisWorkbook.Sheets
            blnCopy = False
            If shtTemp.Type = xlWorksheet Then
                For Each objShape In shtTemp.Shapes 'chtTemp In shtTemp.ChartObjects
                    blnCopy = False
                    If objShape.Type = msoGroup Then
                          ' if ANY item in group is a chart
                        For Each objGShape In objShape.GroupItems
                            If objGShape.Type = msoChart Then
                                blnCopy = True
                                Exit For
                            End If
                        Next
                    End If
                    If objShape.Type = msoChart Then blnCopy = True
                    If blnCopy Then
    '                  blnCopy = True
                       If shtTemp.Name = "GraphAbsatz" And (Cells(i, 8).Value = "x" Or Cells(i, 5).Value = "x") Or _
                        shtTemp.Name = "GraphPreis" And (Cells(i, 8).Value = "x" Or Cells(i, 6).Value = "x") Or _
                        shtTemp.Name = "GraphUmsatz" And (Cells(i, 8).Value = "x" Or Cells(i, 7).Value = "x") Then
                        intSlide = intSlide + 1
                        ' shtTemp.UsedRange.CopyPicture 'kopiert nur Grafiken
                        ' objShape.CopyPicture
                         shtTemp.UsedRange.CopyPicture 'kopiert die ganze Seite
                         ' new slide for each chart
                        objPPT.ActiveWindow.View.GotoSlide Index:=objPPT.ActivePresentation.Slides.Add(Index:=objPPT.ActivePresentation.Slides.Count + 1, Layout:=12).SlideIndex
                        objPPT.ActiveWindow.View.Paste
                      End If  
                   End If
                Next
                If Not blnCopy Then
                ' nichts kopieren
                     ' copy used range
                   ' intSlide = intSlide + 1
                   ' shtTemp.UsedRange.CopyPicture
                     ' new slide for each chart
                   ' objPPT.ActiveWindow.View.GotoSlide Index:=objPPT.ActivePresentation.Slides.Add(Index:=objPPT.ActivePresentation.Slides.Count + 1, Layout:=12).SlideIndex
                   ' objPPT.ActiveWindow.View.Paste
                End If
            Else
            ' nichts kopieren
               ' intSlide = intSlide + 1
               ' shtTemp.CopyPicture
                 ' new slide for each chart
               ' objPPT.ActiveWindow.View.GotoSlide Index:=objPPT.ActivePresentation.Slides.Add(Index:=objPPT.ActivePresentation.Slides.Count + 1, Layout:=12).SlideIndex
               ' objPPT.ActiveWindow.View.Paste
            End If
        Next
        ' nächste Selektion
         i = i + 1
        Next
        Set objPrs = Nothing
        Set objPPT = Nothing
    End Sub

  • Extending Users and Groups

    I need to add some properties to Users and
    groups. I cannot find a TieUser or TieGroup.
    What should I use ?
    null

    You need to extend DirectoryUser and DirectoryGroup. They both have 'Tie' subclasses.
    --jk
    null

  • AD OD Extended Schema Computer Groups

    Mac OS 10.6.5
    Server 2003
    AD-OD w/ Extended Schema
    Kerberos
    Hello,
    So far I have a wonderfully working AD-OD setup with an extended schema. I have a few services running which require kerberos so I know that the foundation of the setup is solid. However, I am able to apply MCX settings to AD-users, user groups, and computers, but am unable to create computer groups with Workgroup Manager applied to AD. The error I get is:
    This action failed because you are not authorized to perform the operation
    The only way I have found to create computer groups is to switch WGM to the OD domain and add the AD computer objects to an OD managed computer group. I hope that makes sense...
    The only information I've been able to find on the intertubes is this:
    Did you create the Mac OS X container at the root of the domain?
    AFAIK, all computer lists are automatically added to the Mac OS X container at the root of whatever domain you are pointed at. If that container does not exist, or you don't have the appropriate privs, you won't be able to create the computer lists.
    If you are in a multi-domain environment and authenticate to "All Domains", WGM will attempt to create the computer list in the Mac OS X container located in your forest root domain.
    At least thats been my experience. I can also add the WGM against AD has always been buggy for me. Random weird permissions errors don't always accurately reflect the outcome of an operation.
    In the case of computer lists, I sometimes need to type * into the search box to find the lists I created, after I was told they weren't created
    http://www.afp548.com/forum/viewtopic.php?showtopic=23022
    I'm unsure of any container that Mac OS created at the root of the AD domain. I certainly don't see one listed in the AD Users and Computers GUI and wasn't aware that the extended schema was suppose to create one. The above quote was pulled from a 10.5.x thread so it may be outdated information.
    Thanks for any and all suggestions!
    Nick.

    bumpskies

  • Invoke nodes for groups, should be simple!

    Hiya,
    I'm new to invoke nodes as of today and I need to reinit to default a large group of objects at the end of my VI. I don't want to set different invoke nodes for each one. Can I apply a refnum to a group of objects and how would I do so?
    Cheers
    Solved!
    Go to Solution.

    In addition to Lynn's suggestion, there are some programatical ways to obtain an array of references, such as Controls[] for the VI FrontPanel or a cluster.
    Felix
    www.aescusoft.de
    My latest community nugget on producer/consumer design
    My current blog: A journey through uml

  • How much should we rely on "Parent" nodes like group?

    So I'm curious how much overhead does these groups, regions, panes, etc take up, and is there a point to worry about them?
    in the current application I'm working on I was thinking of having a group of bookstypes, within a group of bookshelves, within a group of bookcases. So technically I could have 5 groups on a shelf, 5 shelf groups on a bookcase, and 10 book cases being displayed at once, 250 is a lot of groups.
    Now I've seen people post on here saying that have hundreds of groups and such, so I think I'll be okay, but I'm just curious what the practice on these things are. Groups to me are going to make everything much easier, but I don't want to take "easy" for "slower." So if I didn't have these groups I would have to worry about where each book type is on each shelf, where each shelf is on each bookcase, for dragging, moving, rotating, etc.

    Yes, you want a class to do "one thing." Of course, "one thing" can be kind of fuzzy, but there sould be one core responsibility, with maybe a couple of different ways of accomplishing it, or a couple of different aspects or faces to that responsibility.
    As an example that I pull out of you-don't-wanna-know-where, look at java.io.File.
    It does "one thing", but it's really sort of multiple aspects of or tasks associated with that one thing.
    The one thing being "model a file on the file system" and the multiple tasks being, find out the file's type (directory or regular file), create the file, delete the file, list the "file's" (directory's) contents, etc.
    As for .java file length, It does vary on a class to class basis, and depending on whether you put braces on a line by themselves, how much you comment, etc. In general though, my classes tend to be a couple dozen to a couple hundred lines in length. If they start getting bigger than that, I look closely to see if it makes sense to refactor. If I see a 1000 line .java file.
    Note, though, that generated .java files (e.g. from compiling JSPs, or various source code generation tools) tend to be longer, and one doesn't generally farg around with them by hand.

  • CustomNode not recognized as its class type but as class javafx.scene.Node

    In the following code...
    Stage {
        title: "Circles"
        scene: Scene {
            width: 200
            height: 100
            content: Box {}
    class Circle1 extends CustomNode {
        public var Name: String = "Circle1";
        public var Radius: Integer = 50;
        override function create(): Node {
            return Group {
                        content: Circle {
                            radius: Radius;
                            fill: Color.rgb(50, 50, 50)
    class Box extends CustomNode {
        public var Name: String = "Box1";
        var c1: Circle1 = Circle1 {Name: "c1"};
        var c2: Circle1 = Circle1 {Name: "c2"};
        var c_all = [c1, c2];
        def hbox = HBox {content: c_all};
        override function create(): Node {
            return Group {
                        content: hbox
        public function ChangeRadius(p_value: Integer): Void {
            for (i in [0..sizeof hbox.content - 1]) {
                //hbox.content.Radius = p_value; // ERROR: cannot find symbol - symbol: variable Radius - location: class javafx.scene.Node
    println("{hbox.content[i]}");
    var box: Box = new Box;
    box.ChangeRadius(120);
    ... I get an error (see code comment).
    I think actually should it be not class "javafx.scene.Node" but "Circle1"?
    The println writes the correct types.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    It is indeed a bit perplexing... At runtime, we get Circle1, so it should work.
    I think the problem is that the 'content' variable of HBox is defined as Node[] and that's all the compiler sees.
    So the solution is to cast the object we get to tell the compiler it is a specialized node. If the node isn't of the right type, we will get a runtime error instead...
        public function ChangeRadius(p_value: Integer): Void {
            for (c in hbox.content) {
                // Checking type...
                if (c instanceof Node)
                    println("Node");
                if (c instanceof CustomNode)
                    println("CustomNode");
                if (c instanceof Circle1)
                    println("Circle1");
                if (c instanceof Circle)
                    println("Circle");
                if (c instanceof Group)
                    println("Group");
                println("");
                (c as Circle1).Radius = p_value;
    //~             println("{c.Name}");
        }

  • Save/Load Group from/to JavaFX Application

    I am trying to build Drag and Drop (DnD) application, something like (power point) idea using javaFX,
    so I need to save the Shapes, Nodes and Groups that my user would draw ... How can I save these nodes (on HD) and load it later.
    thanks

    I guess HD means hard disk.
    Choose a file format.
    The most obvious candidate file format is FXML.
    If you want other applications to be able to read your files, you could use a different format e.g. SVG, PPT or FXG.
    Assuming you choose FXML, reading the FXML into a scenegraph is trivial (http://docs.oracle.com/javafx/2.0/fxml_get_started/fxml_tutorial.htm#CIHHGHJJ):
    Parent root = FXMLLoader.load(getClass().getResource("fxml_example.fxml"), ResourceBundle.getBundle("fxmlexample.fxml_example"));The code above assumes you have also externalized Strings into a separate property bundle, which, unless you have a need to easily localize text, isn't really necessary.
    Serializing the scenegraph out to FXML is not something I have code to do. I would assume Oracle have some code to do that already (e.g. an FXMLWriter which complements FXMLLoader and takes a Node as a parameter to recursively create an FXML stream or file). I didn't see anything like that in the public API, so you could write one yourself or create a feature request for one at http://javafx-jira.kenai.com.

  • SUN Cluster 3.2, Solaris 10, Corrupted IPMP group on one node.

    Hello folks,
    I recently made a network change on nodename2 to add some resilience to IPMP (adding a second interface but still using a single IP address).
    After a reboot, I cannot keep this host from rebooting. For the one minute that it stays up, I do get the following result from scstat that seems to suggest a problem with the IPMP configuration. I rolled back my IPMP change, but it still doesn't seem to register the IPMP group in scstat.
    nodename2|/#scstat
    -- Cluster Nodes --
    Node name Status
    Cluster node: nodename1 Online
    Cluster node: nodename2 Online
    -- Cluster Transport Paths --
    Endpoint Endpoint Status
    Transport path: nodename1:bge3 nodename2:bge3 Path online
    -- Quorum Summary from latest node reconfiguration --
    Quorum votes possible: 3
    Quorum votes needed: 2
    Quorum votes present: 3
    -- Quorum Votes by Node (current status) --
    Node Name Present Possible Status
    Node votes: nodename1 1 1 Online
    Node votes: nodename2 1 1 Online
    -- Quorum Votes by Device (current status) --
    Device Name Present Possible Status
    Device votes: /dev/did/rdsk/d3s2 0 1 Offline
    -- Device Group Servers --
    Device Group Primary Secondary
    Device group servers: jms-ds nodename1 nodename2
    -- Device Group Status --
    Device Group Status
    Device group status: jms-ds Online
    -- Multi-owner Device Groups --
    Device Group Online Status
    -- IPMP Groups --
    Node Name Group Status Adapter Status
    scstat:  unexpected error.
    I did manage to run scstat on nodename1 while nodename2 was still up between reboots, here is that result (it does not show any IPMP group(s) on nodename2)
    nodename1|/#scstat
    -- Cluster Nodes --
    Node name Status
    Cluster node: nodename1 Online
    Cluster node: nodename2 Online
    -- Cluster Transport Paths --
    Endpoint Endpoint Status
    Transport path: nodename1:bge3 nodename2:bge3 faulted
    -- Quorum Summary from latest node reconfiguration --
    Quorum votes possible: 3
    Quorum votes needed: 2
    Quorum votes present: 3
    -- Quorum Votes by Node (current status) --
    Node Name Present Possible Status
    Node votes: nodename1 1 1 Online
    Node votes: nodename2 1 1 Online
    -- Quorum Votes by Device (current status) --
    Device Name Present Possible Status
    Device votes: /dev/did/rdsk/d3s2 1 1 Online
    -- Device Group Servers --
    Device Group Primary Secondary
    Device group servers: jms-ds nodename1 -
    -- Device Group Status --
    Device Group Status
    Device group status: jms-ds Degraded
    -- Multi-owner Device Groups --
    Device Group Online Status
    -- IPMP Groups --
    Node Name Group Status Adapter Status
    IPMP Group: nodename1 sc_ipmp1 Online bge2 Online
    IPMP Group: nodename1 sc_ipmp0 Online bge0 Online
    -- IPMP Groups in Zones --
    Zone Name Group Status Adapter Status
    I believe that I should be able to delete the IPMP group for the second node from the cluster and re-add it, but I'm sure about how to go about doing this. I welcome your comments or thoughts on what I can try before rebuilding this node from scratch.
    -AG

    I was able to restart both sides of the cluster. Now both sides are online, but neither side can access the shared disk.
    Lots of warnings. I will keep poking....
    Rebooting with command: boot
    Boot device: /pci@1e,600000/pci@0/pci@a/pci@0/pci@8/scsi@1/disk@0,0:a File and args:
    SunOS Release 5.10 Version Generic_141444-09 64-bit
    Copyright 1983-2009 Sun Microsystems, Inc. All rights reserved.
    Use is subject to license terms.
    Hardware watchdog enabled
    Hostname: nodename2
    Jul 21 10:00:16 in.mpathd[221]: No test address configured on interface ce3; disabling probe-based failure detection on it
    Jul 21 10:00:16 in.mpathd[221]: No test address configured on interface bge0; disabling probe-based failure detection on it
    /usr/cluster/bin/scdidadm: Could not stat "../../devices/iscsi/[email protected],0:c,raw" - No such file or directory.
    Warning: Path node loaded - "../../devices/iscsi/[email protected],0:c,raw".
    /usr/cluster/bin/scdidadm: Could not stat "../../devices/iscsi/[email protected],1:c,raw" - No such file or directory.
    Warning: Path node loaded - "../../devices/iscsi/[email protected],1:c,raw".
    Booting as part of a cluster
    NOTICE: CMM: Node nodename1 (nodeid = 1) with votecount = 1 added.
    NOTICE: CMM: Node nodename2 (nodeid = 2) with votecount = 1 added.
    WARNING: CMM: Open failed for quorum device /dev/did/rdsk/d3s2 with error 2.
    NOTICE: clcomm: Adapter bge3 constructed
    NOTICE: CMM: Node nodename2: attempting to join cluster.
    NOTICE: CMM: Node nodename1 (nodeid: 1, incarnation #: 1279727883) has become reachable.
    NOTICE: clcomm: Path nodename2:bge3 - nodename1:bge3 online
    WARNING: CMM: Open failed for quorum device /dev/did/rdsk/d3s2 with error 2.
    NOTICE: CMM: Cluster has reached quorum.
    NOTICE: CMM: Node nodename1 (nodeid = 1) is up; new incarnation number = 1279727883.
    NOTICE: CMM: Node nodename2 (nodeid = 2) is up; new incarnation number = 1279728026.
    NOTICE: CMM: Cluster members: nodename1 nodename2.
    NOTICE: CMM: node reconfiguration #3 completed.
    NOTICE: CMM: Node nodename2: joined cluster.
    NOTICE: CCR: Waiting for repository synchronization to finish.
    WARNING: CCR: Invalid CCR table : dcs_service_9 cluster global.
    WARNING: CMM: Open failed for quorum device /dev/did/rdsk/d3s2 with error 2.
    ip: joining multicasts failed (18) on clprivnet0 - will use link layer broadcasts for multicast
    ==> WARNING: DCS: Error looking up services table
    ==> WARNING: DCS: Error initializing service 9 from file
    /usr/cluster/bin/scdidadm: Could not stat "../../devices/iscsi/[email protected],0:c,raw" - No such file or directory.
    Warning: Path node loaded - "../../devices/iscsi/[email protected],0:c,raw".
    /usr/cluster/bin/scdidadm: Could not stat "../../devices/iscsi/[email protected],1:c,raw" - No such file or directory.
    Warning: Path node loaded - "../../devices/iscsi/[email protected],1:c,raw".
    /dev/md/rdsk/d22 is clean
    Reading ZFS config: done.
    NOTICE: iscsi session(6) iqn.1994-12.com.promise.iscsiarray2 online
    nodename2 console login: obtaining access to all attached disks
    starting NetWorker daemons:
    Rebooting with command: boot
    Boot device: /pci@1e,600000/pci@0/pci@a/pci@0/pci@8/scsi@1/disk@0,0:a File and args:
    SunOS Release 5.10 Version Generic_141444-09 64-bit
    Copyright 1983-2009 Sun Microsystems, Inc. All rights reserved.
    Use is subject to license terms.
    Hardware watchdog enabled
    Hostname: nodename1
    /usr/cluster/bin/scdidadm: Could not stat "../../devices/iscsi/[email protected],0:c,raw" - No such file or directory.
    Warning: Path node loaded - "../../devices/iscsi/[email protected],0:c,raw".
    /usr/cluster/bin/scdidadm: Could not stat "../../devices/iscsi/[email protected],1:c,raw" - No such file or directory.
    Warning: Path node loaded - "../../devices/iscsi/[email protected],1:c,raw".
    Booting as part of a cluster
    NOTICE: CMM: Node nodename1 (nodeid = 1) with votecount = 1 added.
    NOTICE: CMM: Node nodename2 (nodeid = 2) with votecount = 1 added.
    WARNING: CMM: Open failed for quorum device /dev/did/rdsk/d3s2 with error 2.
    NOTICE: clcomm: Adapter bge3 constructed
    NOTICE: CMM: Node nodename1: attempting to join cluster.
    NOTICE: bge3: link up 1000Mbps Full-Duplex
    NOTICE: clcomm: Path nodename1:bge3 - nodename2:bge3 errors during initiation
    WARNING: Path nodename1:bge3 - nodename2:bge3 initiation encountered errors, errno = 62. Remote node may be down or unreachable through this path.
    WARNING: CMM: Open failed for quorum device /dev/did/rdsk/d3s2 with error 2.
    NOTICE: CMM: Cluster doesn't have operational quorum yet; waiting for quorum.
    NOTICE: bge3: link down
    NOTICE: bge3: link up 1000Mbps Full-Duplex
    NOTICE: CMM: Node nodename2 (nodeid: 2, incarnation #: 1279728026) has become reachable.
    NOTICE: clcomm: Path nodename1:bge3 - nodename2:bge3 online
    WARNING: CMM: Open failed for quorum device /dev/did/rdsk/d3s2 with error 2.
    NOTICE: CMM: Cluster has reached quorum.
    NOTICE: CMM: Node nodename1 (nodeid = 1) is up; new incarnation number = 1279727883.
    NOTICE: CMM: Node nodename2 (nodeid = 2) is up; new incarnation number = 1279728026.
    NOTICE: CMM: Cluster members: nodename1 nodename2.
    NOTICE: CMM: node reconfiguration #3 completed.
    NOTICE: CMM: Node nodename1: joined cluster.
    WARNING: CMM: Open failed for quorum device /dev/did/rdsk/d3s2 with error 2.
    ip: joining multicasts failed (18) on clprivnet0 - will use link layer broadcasts for multicast
    /usr/cluster/bin/scdidadm: Could not stat "../../devices/iscsi/[email protected],0:c,raw" - No such file or directory.
    Warning: Path node loaded - "../../devices/iscsi/[email protected],0:c,raw".
    /usr/cluster/bin/scdidadm: Could not stat "../../devices/iscsi/[email protected],1:c,raw" - No such file or directory.
    Warning: Path node loaded - "../../devices/iscsi/[email protected],1:c,raw".
    /dev/md/rdsk/d26 is clean
    Reading ZFS config: done.
    NOTICE: iscsi session(6) iqn.1994-12.com.promise.iscsiarray2 online
    nodename1 console login: obtaining access to all attached disks
    starting NetWorker daemons:
    nsrexecd
    mount: /dev/md/jms-ds/dsk/d100 is already mounted or /opt/esbshares is busy

Maybe you are looking for