JavaFX in Eclipse - A valid JavaFX SDK was not deteted

I get the following error when I try to start a new JavaFX Project in Eclipse
"A valid JavaFX SDK was not detected"
My Environment:
Java 7 Update 1
JavaFX 2.0 SDK
Eclipse Indigo 3.7.1 (Plugin from http://javafx.com/downloads/eclipse-plugin/)
What I tried (but failed to resolve the problem)
Removed and added the JavaFX SDK so many times
Created new Simple Java Project and applied later the JavaFX Feature (Fx Script created is displayed all in red/error)
The JAVAFX_HOME path has been set in Eclipse as "C:/Program Files/Oracle/JavaFX 2.0 SDK" and in environment also.
Can any one point do I miss anything in the integration steps?
Do I have to add any external JARs

After adding the jfxrt.jar, the same error occurred to me
It shows all the lines in red as well.
Stage {
title : "MyApp"
scene: Scene {
width: 200
height: 200
content: [  ]
When I try to run the same "ERROR: Unknown command: -src" is displayed in the console.
Modal dialog error displayed for me is as follows,
Error happened while packaging the application. Command Line: [C:\pro.....\javapackager.exe, -src, C:\.....]
Confused like do I have to use JRE 7 or the JRE bundled with JavaFX for executing the app.
Edited by: 892393 on Oct 20, 2011 3:22 AM

Similar Messages

  • Eclipse Plugin for JavaFX 1.2.3?

    Hi,
    The JavaFX eclipse plugin webpage (http://www.javafx.com/docs/gettingstarted/eclipse-plugin/index.jsp) describes how to install the eclipse plugin, but the link on JavaFX 1.2.1 points to the download of the 1.2.3 version which is not supported by the eclipse plugin!
    The eclipse plugin says something like that: "Imcompatible version: Need JavaFX 1.2.1, found 1.2.3..."
    Is there an Eclipse Plugin version for 1.2.3?
    Else, Where can I download the JavaFX SDK 1.2.1?
    Thanks.

    The JavaFX 1.2.3 SDK was just released this morning. The Eclipse Plugin still requires the JavaFX 1.2.1 SDK, which you can download from:[http://java.sun.com/javafx/downloads/previous.jsp#1.2.1]. We are updating the document [Getting Started With JavaFX Technology Using Eclipse IDE|http://javafx.com/docs/gettingstarted/eclipse-plugin/index.jsp] to point to the correct download. Thanks!
    Edited by: gchaps on Feb 5, 2010 9:34 AM
    Edited by: gchaps on Feb 5, 2010 9:42 AM

  • Using JavaFX in Eclipse 4

    I am trying to determine whether JavaFX can be used as the basis for UI development in the context of an eclipse 4 RCP application.  I am just learning about eclipse 4 and what they've done differently from eclipse 3.x - specifically the concepts of products and features, application model and the newer mechanism for defining the major eclipse RCP application infrastructure.  I went through a tutorial on e4 (Eclipse 4 RCP - Tutorial) and that gave me a pretty good overview and introduction to e4.  The tutorial does not go into what would be involved to integrate JavaFX with eclipse 4, though (not that I would expect it to).
    So, I've taken the sample app that I'd built as part of doing the tutorial and set about seeing if I could implement a JavaFX UI and incorporate it as one of the parts of the small app.  I haven't had much luck so far.  Unfortunately, I'm blundering around modifying the various eclipse 4 "components" (i.e. the "product", "feature" and "plug-in" files) without really any clue as to what I should be doing.
    Here are some details of my environment and what I've done so far.
    Windows 7
    Eclipse Kepler (4.3.1)
    Java 1.7
    e(fx)clipse has been installed
    The sample application built in the tutorial involves:
    Plug-in project with some simple classes that define the "parts", handlers and other stuff needed by e4.
    The e4 "feature" project which is basically just a feature.xml which lists the plug-in.
    The e4 "product" project which has just the .product file, using the feature.
    Prior to my attempts to add JavaFX to the mix, this little application works perfectly.  I created an FXCanvas class (containing nothing at this point) that I attempted to embed in one of the parts to represent its UI.  Then, when I tried to run the "product" I'd get various errors or exceptions depending upon the things I tried.  The problems that occurred unfortunately weren't clear to me as to what is wrong.  I tried adding the javafx plugin to various elements, with varying resulting failures.  At this point I'm at a total loss as to what to do to make this work.
    I was going to try to add some screen shots, but I am prevented from doing so.  There is also no way to add attachments.

    Thanks a lot for your response.
    Can you elaborate on it please?
    I am new to flex so not aware of all the terminologies and process.

  • Does not represent a valid JavaFX Scene Builder installation

    Selected location ...JavaFX Scene Builder 1.1 does not represent a valid JavaFX Scene Builder installation
    Anyone else seen/get this error in Netbeans 7.3 Beta2 when they try to attach Scene Builder in the options screen?
    Is there a work around?

    My guess is that you run on Windows: the interoperability between NB 7.3 and SceneBuilder 1.1 on this OS has been fixed a little after NB 7.3 Beta 2. If you use the current daily NB 7.3 Developer Build it will solve your issue.

  • Default printer was not valid, switching to 'GetUnPrinter'

    I recently deployed my web application to Red-Hat Linux and I'm receiving the following error:  "Default printer was not valid, switching to 'GetUnPrinter'."
    I pinpointed the line of code throwing the exception, which is:  ReportClientDocument reportClientDoc = new ReportClientDocument();
    I designed the report using CR4E.  The exception isn't thrown on my local XP machine.  I saw another forum topic with a similar issue (http://diamond.businessobjects.com/node/1245), but it wasn't helpful.  Does anyone have any suggestions?
    Thanks,
    Kevin

    You'll see similar error messages when you open a file in the Crystal Report Designer client application, and not just with the Crystal Report for Eclipse designer or the JRC.
    The JRC uses the Java Print Service to retrieve printer information - this ensures that the fine placement of fonts and graphical objects are consistent across platforms. 
    If you specify a specific printer against which the rpt is to be designed, then it will look for the very same printer at runtime.  If that printer is not available, then it will try using the default printer for the machine.  If there is no default printer, then it will load a very simple dummy printer model - the UnPrinter.
    The exception message is that - it's an explicit warning that the formatting of the report may differ from design time.
    What CUPS and default printer installation does on your Unix machine is expose a default printer to the Java JVM Print Service.
    Sincerely,
    Ted Ueda

  • New to JavaFX--Calling Java objects from JavaFX

    Hello,
    I am a Java developer who is new to JavaFX. I am having no luck in finding a tutorial that exhibits more than just fun effects. I need to be able to call existing classes from a JavaFX GUI. Can anyone offer any assistance on this? It's very frustrating because this should be a simple task. If we are faced with having to rewrite existing code, we will probably be forced to abandon JavaFX. I hope this is not the case.
    Thanks!

    The answer is yes. The impementation is -
    If you have classes that you keep as library classes that you intend for use irrespective of the platform, then I suspect that you have already written them with no view content. For those, including them in your JavaFX is not really different to using them in Java. I am just learning JavaFX too and the most important lesson for us to learn is that 'JavaFX is Java with FX on the end of it'. I know the strickly come dancing set will say 'oh but what about types'. Well I have found no trouble at all with types, basic or my own, we are in object world so long as the compiler has the class object and we have all stuck to the rules then it has all it needs to act on your objects.
    So your non-View classes can be used as you always use them -
    import mylib'
    var somethingFromMyLibOfClasses = new mylib.ClassThatDoesSomethingVeryClever();
    It is then just a matter of arranging a FX trigger of some kind (trigger/event/timer/bind) to call the function in your library.
    Which triggers and when are the part I am still finding difficult. The basic GUI events are fine (onMouseClick etc), it is 'bind' that is troublesome.
    Binding something in your code to a 'property' of the display element is easy enough, but binding where you have no external variable that relates to 'Property' value is less clear. For example you may have to change a form contents due to a trigger sent from a remote database.
    You have some in the forum talking of 'resize your window a few pixels to force a redraw so that your code can be retriggered'. Others are using timers at high tick frequency to for an update. such as changing a property that you can't see.
    That is utter nonsense, if you look up the proper description of bind then it becomes obvious. Bind can be a two way thing, you can change a value in your element from outside, but you can also change a value outside of your element from within your element.
    Equally that trigger can be your own code. There is no need of trickery to update Scenes, the writters of JavaFX already have it sussed.
    The Sun web site has some great tutirials, but as a personal favourite that cleared up som of the junk about JavaFX that was building up in my mind I reccommend you spend a bit of time here [JavaFX Refference|http://openjfx.java.sun.com/current-build/doc/reference/JavaFXReference.html]
    Not the best layout you will ever see, but it is the best source I have found, then if you use that along side [Master Index|http://java.sun.com/javafx/1.2/docs/api/javafx.stage/javafx.stage.Stage.html] hopefully you will find, as I did, that you do not have to think differently to make use of the FX on the end of Java.

  • Many JavaFX issues pushed out of JavaFX 8 (to 9) today

    I received a bunch of emails today from Jira as Kevin Rushforth triaged numerous JavaFX Runtime issues out of JavaFX 8. I read through The openjfx-dev Archives and didn't see any plans announced for a major triaging effort or how to respond if your issue is pushed out of the release.
    Some of these issues are regressions introduced in JavaFX 8 and others are important bugs that my company and our customer needs resolved in JavaFX 8.
    Here are the main issues that I would like to see fixed in JavaFX 8 that were triaged to JavaFX 9 today:
    WebView select bug: https://javafx-jira.kenai.com/browse/RT-33717
    WebView select bug: https://javafx-jira.kenai.com/browse/RT-16078
    Regression: https://javafx-jira.kenai.com/browse/RT-32355
    I made a comment in the issue to this effect, but I'm not sure that will make any difference.
    What is the process to go through in order to get these issues looked at in JavaFX 8?

    Hi all,
    I'm an engineer in the JavaFX team, and I thought I'd just clarify a few things. Firstly, we're now in rampdown for Java / JavaFX 8.0. This means we are (and have been) actively moving low priority work out of this release and retargeting it at 9.0. Right now we are only working on what we call P1-P3 bugs (or, in Jira terms, showstopper, critical, and major bugs), and in fact we are also deferring many major bugs out of 8.0 too.
    This is not because we don't value your bug reports or think lesser of you as a human being - it is that we work to a schedule and the 8.0 train is getting close to leaving the station, and we have to be on it. This requires us to get our actual bugs in the 8.0 release to zero, which requires the deferrals that you're now seeing happening. And, to be clear, we think the JavaFX community is wonderful ;-)
    It is very important to understand that just because we are retargeting our work to 9.0 does not mean that these bugs won't be fixed until whenever 9.0 is released! Once 8.0 is out the door (well, once we stop working on it, because there is a long period between the engineers stopping the bulk of their 8.0 work and the 8.0 release actually coming out) we will all fully evaluate our backlogs and target many of these bugs to the interim 8.x releases. This means that many of these bugs will be fixed next year in follow-up releases to 8.0, just as we have done with follow-up releases to JavaFX 2.x.
    So, in other words, targeting to 9.0 is a placeholder for us to say 'some release in the future'. You can of course leave comments to impress on us the importance of your favourite bugs (and I encourage you to do that and also vote). Unless we hear from the community on the bugs that are important to them they tend to get prioritised by the engineers based on their own opinions, which doesn't necessarily show us the full picture.
    To answer KonradZuse's comment about 9 and "Van Ness": we did call the project "Van Ness" in jira for quite some time, but we had people complain (on openjfx-dev I believe) that Van Ness was meaningless, so we changed our jira to instead just use version numbers, hence 8u5, 8u20, 9, etc. For all intents and purposes "Van Ness" was a nebulous phrase intended to mean "some future release", so we've basically tightened up our definitions a bit by splitting Van Ness into a number of versions now.
    I hope that helps to clarify some things. In short, we're working as hard as we can, and definitely want to keep you happy. Get on to jira and leave bug reports or comments on bug reports. Do not count on comments left in these forums to necessarily reach the engineers responsible for the bugs - go to them via jira.
    -- Jonathan

  • "Default printer was not valid" bug

    <p>I&#39;m having a problem running certain reports on Redhat Linux.  The error I&#39;m getting is:</p><p> [ERROR] [eq] [Default printer was not valid, switching to &#39;GetUnPrinter&#39;.]  When this happens, no report is produced.  Any ideas what might be causing this?  It doesn&#39;t happen when running on windows XP.</p><p> </p><p>Thanks in advance,</p><p>Don Nelson </p>

    <p>Which designer are you using to create the reports? In the non-Eclipse designer we use the Printer Driver to determine font characteristics (e.g. width, height, etc.). This printer driver information is generally saved with the report, however users can select the option to turn this off. </p><p>In Crystal Reports for Eclipse I don&#39;t believe that we are using the printer drivers anymore so you shouldn&#39;t be seeing this error.  </p><p>If you are not using CR4E to design your reports then I would suggest selecting the "No Printer" option on the Printer Settings in the Report Designer for this report. </p><p>Regards,<br />Sean Johnson (CR4E Product Manager) <br /><br /> <strong><a href="http://www.eclipseplugincentral.com/Web_Links-index-req-ratelink-lid-639.html">Rate this plugin @ Eclipse Plugin Central</a></strong>          </p>

  • When I try to download the latest version of iTunes on my iPod Classic I get the message that "iTunes has an invalid signature" and that "Content was blocked because it was not signed by a valid security certificate.  Anyone know how to fix this?

    When I try to download the latest version of iTunes from apple.com, I get the message "Content was blocked because it was not signed by a valid security certificate."When I open iTunes and try to download the latest version there, I get the message "iTunes has an invalid signature.  The download has been removed."  I have also gotten an Internet Script Error stating that an error has occured in Line 0, Char O and that "Access is denied to images.apple.com/global/scripts/lib/iepngfix.htc."  This problem has never occurred with earlier versions of ITunes.  Anyone know how to fix this problem? 

    Are you downloading iTunes form an Apple website or somewhere else? If the answer is somewhere else, try downloading it from Apple. Click on iTunes in the black menu bar above and go from there.
    Let us know what happens.

  • Error: No valid complaint data was found in this sales area

    Hi All,
    I am getting below error while delta or request download of customer.
    No valid complaint data was found in this sales area
    Message no. CRM_SPL_BUPA_FRG0010203
    Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN.
    Message no. SMW3018
    Error case:
    ECC-->Customer(Sold to) extended to a sales area and saved.
         CRM-->Business partner gets updated in the CRM properly.
    ECC--> Deletion flag for same customer and same sales area is set. (Deletion flag - "Selected sales area").
         CRM-->Business partner gets updated in the CRM properly and is not shown as extended to the sales area via BP t code.
    ECC-->Deletion flag is removed for the customer.
         CRM--> BDOC fails to update the Partner and goes in error.
    Problem comes when deletion flag is removed in ECC.
    Any help would be highly appreciated.
    Thanks in advance.
    -Ram

    Hi Ram,
    Hope you have not make any field mandatory in the Complaint tab in the sales area section in the BP.
    When you are removing the deletion flag please check if any entry is mandatory in the Complaint tab.
    Hope this will be useful
    Thanks and Regards
    DJ

  • How do I do validation using SDK.

    How do I do validation using SDK.
    We have created different warehouses for the client business operations.
    For eg:
    1. Inspection Stores
    2. Rejection Stores
    3. Main Stores
    In Goods Return & A/P Credit Memo, other than RejectionStores is
    selected, we want to generate a warning message.
    How do I do this through SDK.
    I need the code sample for the following activity:
    1. Reading the data available at each row of the current form (Goods
    Return/ A/P Credit memo)
    2. Validate the data with a paricular warehouse
    3. Generate warning message.
    I could not find any samples related to this.

    There is a method called MessageBox for the Application object. Have a look at
    the documentation, everything is there.

  • I can't get dvds to play "There was an initialization error. A valid video device could not be found for playback. [-70017]  Anybody know how to resolve this?

    I can't get dvds to play and, instead, get "There was an initialization error.  A valid video device could not be found for playback. [-70017]"  I went in for a Genius appt Friday and it played for the tech...but now I'm back home (one and a half hours from the store) and I'm getting the error message again when I try to load a dvd.  Any recommendations?

    Hello, try this...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    Reboot... any change?

  • Flat file connection: The file name "\server\share\path\file.txt" specified in the connection was not valid

    I'm trying to execute a SSIS package via SQL agent with a flat file source - however it fails with Code: 0xC001401E The file name "\server\share\path\file.txt" specified in the connection was not valid.
    It appears that the problem is with the rights of the user that's running the package (it's a proxy account). If I use a higher-privelege account (domain admin) to run the package it completes successfully. But this is not a long-term solution, and I can't
    see a reason why the user doesn't have rights to the file. The effective permissions of the file and parent folder both give the user full control. The user has full control over the share as well. The user can access the file (copy, etc) outside the SSIS
    package.
    Running the package manually via DTExec gives me the same error - I've tried 32 and 64bit versions with the same result. But running as a domain admin works correctly every time.
    I feel like I've been beating my head against a brick wall on this one... Is there some sort of magic permissions, file or otherwise, that are required to use a flat file target in an SSIS package?

    Hi Rossco150,
    I have tried to reproduce the issue in my test environment (Windows Server 2012 R2 + SQL Server 2008 R2), however, everything goes well with the permission settings as you mentioned. In my test, the permissions of the folders are set as follows:
    \\ServerName\Temp  --- Read
    \\ServerName\Temp\Source  --- No access
    \\ServerName\Temp\Source\Flat Files --- Full control
    I suspect that your permission settings on the folders are not absolutely as you said above. Could you double check the permission settings on each level of the folder hierarchy? In addition, check the “Execute as user” information from job history to make
    sure the job was running in the proxy security context indeed. Which version of SSIS are you using? If possible, I suggest that you install the latest Service Pack for you SQL Server or even install the latest CU patch. 
    Regards,
    Mike Yin
    If you have any feedback on our support, please click
    here
    Mike Yin
    TechNet Community Support

  • I am getting error "Office for Mac has determined that your  product key is not valid." when opening xlsx doc.Till yesterday i was not geting this error

    i am getting error "Office for Mac has determined that your  product key is not valid." when opening xlsx doc.Till yesterday i was not geting this error and was working perfectly fine with my sheet.

    Could be some Disk Corruption, but...
    http://support.microsoft.com/kb/969064

  • In Elements 13, when trying to save, I get this message:Could not save a copy as "agb3_2014:09_054.tif" because the file name was not valid.

    Hi:
    I use Nikon NX2 then save as a TIFF file then do final editing in Elements.  With Elements 8, I could then save as a JPEG file and upload to Flickr.  With Elements 13, I get this message and cannot save:
    Could not save a copy as “agb3_2014:09_054.tif” because the file name was not valid.
    I note the colon (:) in the file name.  I did not place it there.  It is some automatic save.  Typically I save as 2014/09
    It is probably some setting I need to adjust but I am stumped.  All help is welcome.
    Thanks
    Al
    Message was edited by: Albert Butzer

    Don't use the slash, either. Stick to no punctuation except dashes and underscores for safety's sake. Other punctuation usually has another meaning in code.

Maybe you are looking for

  • IE issue with iWeb  site

    1) Images don't load 2) in IE 8 : HTML email snippet does not show up How can this be resolved?

  • Html table vertical stretching

    Hi, I'm getting weird output when report is generated in HTML. I've added a table via insert table wizard, and I have added four different groupings, first two are above, and last two are left. When my report has more than 500 rows some cells are get

  • IMac G5 won't recognize firewire DVD burner

    Hello, all! I just purchased a LaCie+/-RW DVD drive (FA Porsche design) with firewire. From my first attempt to hook it up, my computer won't recognize the device. System profiler shows the firewire ports listed (400 speed) but the DVD drive doesn't

  • Re: Related to CJ20N

    Hi Guys, This is an Urgent Issue!!!! I have a requirement to upload the data .Initially they have created project definition and wbselement with the help of some data transfer technique later on they have added custom fields to this transaction. Now

  • If you don't believe the Macbook pro is tough...

    ...check out video of what happened to my 17 inch Macbook Pro onstage last night. www.oneatlantamusic.com It's the blog entry titled: Haven't got time for the pain. Mac and I are both doing fine, although it was a stressful experience! This laptop is