Javafx navigational flow

Hi All,
Could any one explain what is the best practice for navigational flow for Javafx application?
Thanks,
Thamizharasu S

Similar Messages

How to analyze the navigation flow in Oracle Portal, Number of unique users, downloads and other estastisticas of use of the Portal and Documents

Dear
Experts, I have a very exciting demand, the board of a customer.
I need to create an analytical application on Oracle Portal, UCM, Spaces, WebCenter, to inform me which quantitatively pages, url and documents are accessed.
How to analyze the navigation flow in Oracle Portal, Number of unique users, downloads and other estastisticas of use of the Portal and Documents?
I thought I'd create a ods with the data of Content Tracker and Google Analytics, and model the analysis through the BIEE.
I ask, what is the standard solution that is used in these cases?
Thank you
Miki

Dear
Experts, I have a very exciting demand, the board of a customer.
I need to create an analytical application on Oracle Portal, UCM, Spaces, WebCenter, to inform me which quantitatively pages, url and documents are accessed.
How to analyze the navigation flow in Oracle Portal, Number of unique users, downloads and other estastisticas of use of the Portal and Documents?
I thought I'd create a ods with the data of Content Tracker and Google Analytics, and model the analysis through the BIEE.
I ask, what is the standard solution that is used in these cases?
Thank you
Miki

Retun navigation flow to a specific Tab

Hi all,
I have the following situation: One page with 2 tabs (Default, Item) on the Item Tab it is possible to select to update one of the items (in a table list) which starts a new flow to an updatePage.jsff. After the update in the record is done (confirm button) everything works fine BUT the return brings back the Default Tab selected and not the Items Tab. (As I understod task flows have an unique entry point which happens to be the default tab).
I've been moogling around and found no solutions on how to return the navigation (from the update jsff fragment) to the Items Tab (which was selected when the update use case was fired), does anyone know a way of achieving this solution in ADF? (isn't there a " setVisible(true) " for ShowDetailItem components?
I am using ADF Faces RC for JDev 11g,
Appreciate any hints or suggestions.
Edited by: [email protected] on 24/12/2009 07:13

Hi there Puthanampatti, thanks for your help.
I'm trying your suggestion (some problems with my app right now)... just to get synch with your idea. Is there anything else to do but bind the ShowDetailedItem (sdi) to my ManagedBean in order to have ADF to recognize the object? (what I mean is if I bind each tab to a variable in my managedbean - lets say defTab and itemTab) can I just implement the calls as you suggested (and the getCurrentInstance will do the binding back to the object in the application)?
Another question is.. you suggest to invoke the partial trigger... do the tabs have to be set as "clients" of that partial trigger?
As soon as I can test it I will post the results.
Cheers,
Luppi

Regarding Navigation Flow of Topics in Robohelp 11

Hi,
1. As, i have added previous and Next Topic buttons in my robohelp 11 chm, yet i am facing a flow issue.
2. The flow issue is:
-> While the chm file is generated, in the TOC pane of chm as shown in the image below:
the arrow buttons in the highlighted image above are not working according to the toc flow.
As, suppose i first click on Start page -> New features -> Recommended System Prerequisites, and now i wish to navigate directly top Start Page then it is creating a problem as the buttons doesn't work for the same. please help.

Hi,
Yes i am first generating a Webhelp as my Primary Layout, and then from the webhelp i am generating chm file, i also imported skin in it, and done all the necessary settings required.
Thus, also validated the Browse Sequences, but the issue is that the navigation halts with in the Book.
As, shown in the above image if i navigates from New Features Topic -> Recommended System Prerequisites -> Installation Procedure, then if i wish to go back to New Features by clicking arrow buttons(<- and ->), then the navigation halts in mid at the respective book name that is Getting Started only.

Best practices for Manage beans and Navigation flow

Hi,
I have the following scenarios along with the possible solutions. I need confirmation from JSF experts, which is recommended way of doing it.
Scenario
I need to show a list of item from database/config file to the user. User will select the show details from the menu and the details page will be shown with list of items.
User - > Menu - >Show Details -> Details Page.
Components
DetailsBean.java
menu.jsp
Details.jsp
Solution 1:
a) When user click show details, call DetailsBean.populate(),
b) DetailsBean.populate() method populate list from DB, store it as a property in it and returns the String for next flow
c) User will be navigated to the Details.jsp using the <from-outcome> for menu.jsp.
d) Details.jsp will read the property from DetailsBean() to show the list of items on page.
Solution 2
a) When user click show details, navigate user to the Details.jsp.
b) Details.jsp is tied with the DetailsBean.populate() method , will get the list and print the page.
I am little confused which one to be used and when ?. Are there any scenarios where we need to use specifically solution 1 , any sometimes specifically solution 2?
In Brief
*" Should we populate bean first and let the jsp page, just draw what ever is there in the bean, without thinking much about how the bean get populated"*
or
*"Should we let JSP to call methods on bean, get contents directly and show to user, no need to store in bean."*
Let me know, my you need more information about my question.
Expecting an quick reply on this.
Thanks,
Sudhir

In real world, I never use navigation cases. I always declare action methods void (or return null, if you want). I just show results at the same page, if necessary with help of the 'rendered' attribute. And then for plain page-to-page navigation I just use GET all the way using h:outputLink or plain HTML <a> elements, but not with commandLinks. Finally it's all much better for the User Experience.

Application Navigation Flow

Hi,
I'm testing Flex and trying to find out if I can use Flex in
a real application. In terms of components (or controls) I think it
has almost what I need. I've tested WebServices and DataBinddings
and so far it's quite OK.
Now I'm looking on how to navigate between mxml applications
and open on-demand. Let's explain better.
Let's say that I have 200 mxml applications and each one
implements a part of the total application. Like a search or a
insertion form. Now I want to control the applications flow and
show the user the right 'part'. So I need to go from A.mxml to
B.mxml and so on.
I don't want to put all 'parts' of the application in one
.mxml and show and hide the stack but load the parts on demand.
Is this possible?
thanx

Yes, you would use modules in this case. They are
independently loaded and unloaded. There is more info here:
http://livedocs.adobe.com/flex/3/html/modular_1.html
hth,
matt horn
flex docs

How to control navigation flow in order using tab and shift tab key?

In JDeveloper 11.1.1.3, how to set the focus on ADF components in order while a tab key is clicked.I dint find any useful articles so far but I think Javascript is the only way to acheive this.Can anyone give me any ideas on this pls?
Thanks,
Swathi Patnam

Swathi Patnam wrote:
In JDeveloper 11.1.1.3, how to set the focus on ADF components in order while a tab key is clicked.I dint find any useful articles so far but I think Javascript is the only way to acheive this.Can anyone give me any ideas on this pls?Javascript is possibly one way to achieve it. Take a look at an extract from Frank Nimphius' book [url http://books.google.gr/books?id=wlXyDIEyIHEC&pg=PA615&dq=Nimphius+%22tab+order%22&hl=en&ei=D6bATJqgMYb54Ab06cnTCw&sa=X&oi=book_result&ct=result&resnum=1&ved=0CCMQ6AEwAA#v=onepage&q&f=false] here suggesting an implementation based on JavaScript. Of course you will have to buy the book to see the complete solution. ;)
Since the tab order is from top to bottom, the other solution suggested - check this post: Re: How to set tab order in ADF - is to keep each horizontal "line" of components in a af:panelFormLayout with its rows attribute set to 1. This is a work-around not based on a tab index but it would do the job if you can consistently group your components inside panelFormLayouts as mentioned.

Can I change a process flow at run time??

Hello everybody,
I work in Oracle BPMS 11.1.1.5. I need to change a process flow at run time due to changes in the business logic, I mean add, delete and modify tasks, navigation flow, etc. I know business rules can be modified using Oracle BPM Composer, but I couldn't find the way to modify the process flow. I have seen other BPMS, like BizAgi, for ex. that can do that. Do Oracle BPMS have that functionality? Please I need it a lot!!!!
Regards and thanks in advance,
isabelbernely

Hi
As JonPetter mentioned, you can get this and preferably get only from Support. I hope you have some license if you going to prod with this. Use that and if possible talk to your sales guy and create a support account. Then request the feature pack. The thing is, if we put it in some public shared location, it is the violation of using the oracle product. Unless someone takes risks they may upload but still its not advisable.
Sorry
Ravi Jegga

Warn About Changes and page flow

Hi, in dev guide, it is said:
For any single page, or first page in a navigation flow where the retainAM URL parameter value is set to Y (and the pages share the same root UI application module) as you navigate between each page, set the Warn About Changes property to True on the pageLayout region.
in other word, if pages in page flow are in the same AM, after changing am in the first page, anytime leave the following page to click the home link(oracle branding), the WarnAboutChanges msg should be alerted?
But,
Now I have two pages, using the same AM, set the two pages' property "Warn About Changes" to true.
And I want to implement this: after inputing some words, and click a sunmitButton forward to pageB(add retainAM = Y in setForwardURL in code), then in pageB don't do anything, but click home link, WarnAboutChanges message does not alert.
Could anyone help to explain this?
And how to implement the page flow warnAboutChanges?
And how root application module to set if different pages in different AMs?
PreThanks to you very much!

But,
Now I have two pages, using the same AM, set the two pages' property "Warn About Changes" to true.
And I want to implement this: after inputing some words, and click a sunmitButton forward to pageB(add retainAM = Y in setForwardURL in code), then in pageB don't do anything, but click home link, WarnAboutChanges message does not alert.
Could anyone help to explain this?
I asked u previously also read dev guide properly, here it what dev guide say:
"By default, the Warn About Changes property is set to True for each of the items in this list except for the
OASubmitButtonBean whose default value is False (a ccording to the UI guidelines, the "Warn About
Changes" check should be performed for all submit button instances except for Cancel, Apply and Submit
buttons). If you want to explicitly enable the check for a submit button, set this property to True. Note that can
also set it programmatically by calling OASubmitButtonBean.setWarnAboutChanges(pageContext,
Boolean.TRUE) in processRequest()."
I hope this answers ur question.
And how to implement the page flow warnAboutChanges?
Read "Save Model ('Warn About Changes')" in dev guide :).And how root application module to set if different pages in different AMs?
You can nest differnt AMs in on AM in AM wizard.--Mukul

Will Flash CS5 make a flow chart of my AS2 app?

Hi -
This is really a question about whether or not Flash CS5 has a feature that would make my current task easier.
I built a Flash8/AS2 application a few years ago that had quite a complex structure for a novice like me. The app starts with a Splash screen that gives the user 2 basic choices, one of which leads to a navigation menu movie clip which leads to 52 informational videos, and just about as many getURL's to forms at the customer's site. Each video is in a "container" movie clip that also has buttons leading to other mcs with more static information.
It's a very dense tree!
Now my customer is asking for a "Navigation Flow Chart" made in Visio or some such plotting software. That's not a problem but it's arduous, tedious, etc. IF Flash Pro CS5 had a built in widget that would help with such a task, displaying the tree of connections between the movie clips that I could work from, I could get the job done quicker and get some new software too.
Will Flash CS5 generate a "navigation flow chart", a map that shows all the connections between all the movie clips in my app?
Thanks in advance for your input.
jl

hi
there is nothing like that in CS5

How to implement navigation control inside view controller project

Hi,
I am trying to implement an navigation control in a view controller project.
I am unable to do that process.
Can anyone please suggest me how to do this navigation flow which should be placed inside view controller.
SRI.

Hi,
I am using Jdeveloper 11.1.1.4.0.
To use the appModules methods, I am creating the service interface and then I am creating the webservice proxy into another view controller project and access the appModule methods.
Now, I don't want to create the webservice proxy. I want to directly access the appModule methods.
Thanks,
Rohit.

Navigation to jump to different menu ?

Most chapter menu systems on commercial DVDs allow the navigation flow to advance through several menus, where each menu "page" may have 4 chapters, and on the fourth chapter, the right arrow would actually advance to the first chapter on the next chapter index "page."
I only see how DVDSP4 allows navigation buttons to map to other buttons on the same menu, not jump to another menu.
Is this not possible, or is there some workaround/trick?

You can place a button with auto activation (which can be quirky) to jump to the next menu so when the right key it pressed after the last button it moves on.

Developing desktop applications

Hi.
I'm coming back to desktop development. I've been away for a long time.
In order to productively develop professional desktop applications, is JavaFX mature enough to become the right choice? Is JavaFX a complete replacement of Swing?
Thank you.

It would be great if there were any means of developing n-tier applications using java desktop (JavaFX in this case) as the front-end, loading dynamically both content and views. There are a few examples of potentially helpful third party frameworks and libraries to assist with this.
It would be interesting to see if Oracle came up with an official end to end development, runtime and tooling stack for n-tier JavaFX apps.
Consider the webfx approach of a JavaFX "browser" that consumes and renders fxml documents with attached scripts.
https://github.com/brunoborges/webfx
Or the sadly defunct JFX Flow project (Managing navigation flows in JavaFX clients):
http://www.zenjava.com/jfx-flow/
The zenjava enterprise series (connecting Spring Servers with JavaFX):
http://www.zenjava.com/series/building-jee-applications-in-javafx-2-0/
There is also captiancasa (merges JavaFX and JSF):
http://www.captaincasa.com
And open dolphin (client/server framework for JavaFX):
https://github.com/canoo/open-dolphin
The Henley Data sales sample app (nice example of connecting a JavaFX client app over REST to an application server backed by a relational database):
http://www.oracle.com/technetwork/java/javafx/samples/index.html
And j-rebirth (work in progress but includes a bunch of client application framework facilities for JavaFX):
http://www.jrebirth.org
And datafx (simplifies taking data streams and getting the data into the complex virtual flow JavaFX controls such as TableView and TreeView):
http://www.javafxdata.org
Most of the above frameworks are immature enough that you could reasonably consider developing your own rather than reusing something existing (depending upon your project). It's not like you have develop everything yourself. It's java and there is lots of existing stuff out there, especially when you start looking at client/server comms and server side processing and database access. But unfortunately there is not much that helps really pull it all together into a coherent end-to-end platform for rapid development.
Drag and drop prototyping tools which go from UI to database aware app, like you get with something like MS Access, don't really exist for JavaFX. You can mock up the UI quick in SceneBuilder, and code up the logic for the UI controls quickly and easily enough. Systems which manage the flow of screens though aren't all that great, so you'll need to spend some time on that. You will also you need to choose and make use of appropriate libraries for stuff like session management, server communications, data transfer, etc.

How to obtain the license for the mentioned products.

Hi All,
Please help me in below licensing issues.
1) Our functional team got the below error while accessing "Job Scheduling Workbench".
Error: The Workbench is inaccessible because Oracle Manufacturing Scheduling has not been licensed. Please work with your Account Manger to purchase the license.
2) Another error message while accessing the navigation Flow Manufacturing --> Product Sync --> Flow Routings
Error: APP-BOM 20972: You cannot access this form
Cause: You do not have a license for Oracle Flow Manufacturing.
Action: Obtain a license for Oracle Flow Manufacturing.
Please guide me how to obtain the license for the above products.
Environment: eBS R12.1.3 on Linux 5.8
Regards,
Siva

Thanks for providing the document. I follow the document and get back to you for any issues.
Regards,
Siva.

Command Link : Backing bean setters/getters always invoked

I am trying to understand how to the setters and getters of a request scope managed backing bean are invoked through the navigation flow when using a command link.
It seems that no matter where the navigation rules redirects the page as a result of the action, both the setters and getters of any field bound in the originating page are called.
For example if the originating page has a field name referred by "#{UserBean.name}" to input a username. setName() and getName() are always called as a result of a click on a command link
This behavior is easily seen in a simple JSF example such as http://www.netbeans.org/kb/articles/jAstrologer-intro.html.
If the jsp pointed by "to-view-id" is changed to have no reference to the backing bean or is changed to a jsp with just text, both setters and getters are still invoked.
I could understand why the setters would be invoked (doesn't know ahead of time if the bean will be used?) but at least why the getters?
Last, how to prevent this behavior? The problem is that the backing bean might have complex logic where it will fetch data if a getter is called.
Thanks.

I guess this article might be interesting to get some insights http://balusc.xs4all.nl/srv/dev-jep-djl.html
The setters are invoked to set values and the getters are invoked to get the eventually presetted default values or the previously submitted values.

Javafx navigational flow

Similar Messages

Maybe you are looking for