JavaPOS for Ingenico Device Programming

Hi.. has any body done... or have any idea about JavaPOS?
Actually I have some problem in developing the forms which are to be displayed on the device.
In the device we use JavaPOS. It contains some Reference Path Convention->JavaPOS . But the device is not able to find the image file

http://www.javapos.com/

Similar Messages

"Enable Access for Assistive Devices" is missing from Yosemite and my QuicKeys program depends on this to work. Help!

This is my second day trying to get my QuicKeys application to work in Yosemite, but "Enable Access for Assistive Devices," which QuicKeys needs to work, is missing from Yosemite. I have gone through the entire System Preferences panel (Security and Privacy, Accessibility, Keyboard, etc.) without success - it's just not there. I have checked this app in the Privacy pane and dragged
"QuicKeysUserEventHelper" out of the QuicKeys Resources folder into the Applications folder so it could "appear" in the Privacy pane, and then checked it there. Is there any way to enable access for assistive devices - a Terminal command, perhaps?
QuicKeys is my most used program, which I have had since its inception at least 10 years ago! Help!

Thank you for your reply! I did everything that Startly recommended (actually, gb2), and when I dragged the QuicKeys Helper into the Privacy box. I didn't see it, but after I quit and restarted QuicKeys, it worked! However,I had first dragged the QuicKeys app to the trash, emptied it, then restarted. Next, I redownloaded QuicKeys from Startly and THEN I went to gb2's directions. All together, my QuicKeys now works on my MacBook Air. BUT NOW, I keep getting the warning that says that this version and activation code are already in use by another user! I am also getting those warnings on my Mac Pro - which had the same problem yesterday (QuicKeys not working), until I heard back from a Technical Advisor from Startly, who told me about trashing the app and redownloading from their site. Last night, that version of QuicKeys worked WITHOUT my having to drag the QuicKeys Helper app into the Privacy pane. Perhaps it is there, but invisible - the helper app is not visible on either of my computers' Privacy panes.
OK, NOW WHAT DO I DO? Every 20 seconds or so, I'm getting those annoying warning signs (on BOTH computers) and requests to put in my activation key, and then told that it is being used by another user!!!
AM I EVER GOING TO BE ABLE TO USE MY 2 LICENSES FOR MY 2 QUICKEYS PROGRAMS???

Programming for Palm devices.

Two simple question this time.
1. What do I need to start developing applications for Palm devices?
2. Does anybody know any good references for beginners in this matter.
Kind regards and thanks in advance,
Kurt.

I've successfully got a java app running using the J2ME... I think there was a Palm-specific version I downloaded. Basically, it comes with a Palm micro VM, that takes up about 300K on your Palm. Then your java classes are packaged using a special utilitiy into PDB files, which you can directly run on the Palm.
This works pretty well, as long as you stick to the basic libraries that come with the J2ME. If you try to do anything fancy, the overhead from linking in all the external Java classes (taken care of for you, mostly, by the PDB packager) becomes a little extreme.. try doing XML processing, for instance, and you'll end up with a 500K program...

Java programing for Mobile devices on OS X

im completly new to java, and very interseted in getting started with developing for mobile devices..
i have experience with other languages (C#.NET, a little VB.NET, BaSH, Ruby, Python...)
but i dont really know were to start..
what do i need to create, compile, and use java aps on mobile devices
Also, im using OS X 10.4, so i would need someting mac compatible...
(i have an HTC S710 with Windows Mobile 6.0)
Message was edited by:
maxtors

Hi java is platform independent , so dont worry about support on MAC etc.
what i would suggest is before thinking of coding for mobiles learn core java. Install editors like netbeans,eclipse and understand the languages.
The folowing links will help you
http://java.sun.com/docs/books/tutorial/
FYI java has Java ME platform for developing application on mobiles
Vijay

Lag When Programming For iOS Device With Adobe Flash Professional.

Hi, I'm trying to make an Application for iOS device, Everything is find, but when i installed it on my iphone 4 and my iPhone 4S my game start lagging, i don't what to do, i tried to simplifed the code but nothing is working i dont know if it's in the rendering or when i'm trying to export, but on my iPhone it's lagging.
Any Help Please, Solution ?
Thanks
Francis

Target gpu on the device you're testing .. you'll get much better results.
You can do it on the xml configuration file on <renderMode> or if you're publishing in flash on the settings of renderMode select GPU.
Also get rid as much as you can from vector graphics and use bitmaps instead.
You can use Adobe's method of converting a vector in bitmap like this : myMC.cacheAsBitmap = true;
And also if you're moving an object, scaling or changing it's transparency use myMC.cacheAsBitmapMatrix = new Matrix();
These are some basic optimization tips.

Apple ID for the Deployment Program and VPP is the same

I created an Apple ID for the Deployment Program and authorized the same ID for VPP. Now I learned these should be different. Is this a problem and if so, how can the VPP ID be changed?

You should be able to. The only hiccup will be that any apps that you have purchased with the older ID you will have to repurchase with the newer ID to be able to keep using them.
Though of course this actually depends on how you plan to use the IDs. For example, I had an Apple ID through iTunes a few years before I opened a .Mac/MobileMe account (what iCloud is now in case you are new to Apple). Thus, my iPhone and iPad actually have two IDs on them, one for iTunes/App Store, and one for anything associated with iCloud. I've never really had any problems assoctiated with having two IDs on one device. Usually just an extra step when I get a new device or have to restore either of them for some reason. Though I understand that this is probably not what you plan on doing, I thought I would use it as an example of what the IDs are really associted with on the devices.

There must be a real solution to "Windows found driver software for your device but encountered an error installing"

"Windows found driver software for your device but encountered an error installing"
I've spent hours researching this error - Seems like many people have the same issue although there is no difinitive fix or known cause.
I'm hoping someone here has an answer.
Windows 7 Home Premium x64 OEM (HP)
This is not an upgraded Vista system.
It's not a specific driver related issue as it's the same response/effect be it graphics/chip set/usb/printer drivers.
Please dont suggest to flatten and re-install or run a repair install - It's not an option, I only have remote access to the unit
as it's currently in field use.
This is a machine specific issue - identical machine purchased at the same time and configured the same has no issue.
So the story.
User has been fine for weeks - no hardware of software changes except Windows Updates.
A Camera/USB connection that was working no longer does.
Tried in all USB ports
Plug in - windows announces found new hardware, tries to install drivers then fails
with "Windows found software for your device but encountered an error installing ...."
Device manager finds and identifies device although it is in the 'Unknown Device" category.
Manually updating drivers via search/internet or point directly at a driver has exactly the same effect.
Thinking this was just the camera drivers - I researched and downloaded new drivers from camera manufacturers sites
Fuji and Canon.
Same effect.
Deleted/uninstalled drivers completely, deleted/uninstalled all USB root hub and USB devices (hidden and visible)
SFC /Scannow finds no error
Cold boot finds USB and chipset(?) devices on boot attempts to reinstall then we get
"Windows found driver software for your device but encountered an error installing"
So now I have no usb devices at all - memory stick/card reader/printer...... nada.
in fact if I try to update any device driver I get the same message generated.
Restore point does not help either.
After much trawling I found reference to a permisions issue and stale driver cache data.
(This is using an administrator account - not user with admin permissions?)
I'm willing to try anything at this time
I deleted the infcache.1 and other .dat files under c:\windows\system32\driverstore
Copied the usb .inf and .pnf from the appropriate FileRepository directory into c:\windows\inf
Uninstalled all the usb/unkown devices from device manager again.
Rebooted
Takes a little longer to boot as I take it it's rebuilding the driver cache then
a very short hurrah!!!
I can now use usb memory card and pen drives - no issue
Plug in a camera or printer...
"Windows found driver software for your device but encountered an error installing"
Several attempt at this trying different driver versions.
It should not be vendor specific, the other field machine that works is using Microsoft drivers for these devices.
I even copied the drivers from one machine to the other - repeated everything above...
"Windows found driver software for your device but encountered an error installing"
And then the nail in my sanity
Try windows update....
Reboot
"Windows found driver software for your device but encountered an error installing"
but this time its different.
The device it thinks it cannot install is the generic MTP-PTP drivers (Photo Transfer Protocol -so am I getting somewhere)
so it still finds but cannot install.
The cameras are always found but appear as 'unknown devices' and cannot be accessed
Uninstall all USB/unkown again - reboot..
Same message and this time I've lost all the USB again.
Restore point to before Win Update gets me USB back again although I still have no cameras - so theres an update issue as well.
This has to be tied down to a file access/ registry problem although I'm loath to go cutting about without some guidance.
I'm no great believer in 'registry cleaners' unless anyone can point to a definitive/no ad's/sales version that really works.
As I said above, flattening/rebuild at this time is not an option - the user is not best pleased and I'm completley stumped.
If anyone has experienced(manu of you have) and fixed(still to find one) this issue please let me know how as soon as possible.
Chris

I know I am replying to an old thread - but I have the answer and resolved this error, and since this message comes up first in search results, and part of my answer came from this thread, I wanted to help someone else as this took an extra
12 hours and a lot of technical insight to resolve. See below for detailed explanation that others ask for above.
My original issue was that iTunes didnt reinstall. generating this error that said I am trying to access an unavailable network resource and to browse to find itunes64setup (again). This may partly have been due to me deleting old install version folders.
Research led me to completely uninstall apple products and reinstall per their instruction and fixed the issue with iTunes. see
Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8 - Apple Support
The SAME error I had while updating itunes recurred while uninstalling it from my Windows 7 SP1 system...so I went to microsoft Fixit and attempted to correct and it properly uninstalled iTunes for me, which allowed the reinstall.
What didnt work was my USB web root/ root hub, which partly involved my older system and USB 1.0, and the delete/reinstall existing drivers with the c:\windows\winsxs folder as source of drivers (thank you Magon Liu!!!) which I had to figure out what/why
and how.
Then I had an intel chipset issue...my new Iphone wasn't recognizing in plug and play, and there was an error with installing the device drivers for my new iphone 6. Manual applications didn't work, even though a generic device showed in control panel -
device manager with a yellow !
Per above blog answer - I tried to remove and reinstall my USB controller or update the drivers (I have an Alienware M15 laptop - a few years old.) I discovered that the USB host controller - an Intel(R) 5 Series / 3400 Series Chipset family USB Enhanced
Host controller - (port) was not covered by current Intel chipset programs which are Series 6 and later, but did have an update (8/20/2009 v9.1.1.1020) that supported USB 2.0 (and therefore 3.0 backwards compatibility which as an issue with my new iPhone
and some USB thumb drives.) To find this I had to look at the Support - Downloads and Drivers - browse for drivers and somewhere found an option to look for older no longer supported drivers. I found infinst_autol.exe for my case.
Once downloaded I tried to install and failed. Found the log in C:\Intel\Logs and contains:
[InstallDev]
          [Device]
            Driver = C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\WIN7\ibexusb.inf
            INF = C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\WIN7\ibexusb.inf
            Installed INF =
            Previous driver package =
!           Warning 0xE0000235: DriverPackageGetPath failed.
            Difx = 64 bit
Execute command: C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\x64\Difx64.exe -DriverInf "C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\WIN7\ibexusb.inf" -Flags 20 -KeyPath "Software\Intel\Difx64"
            Using RegDeleteKeyEx
!!!         ERROR 0xE0000246: DriverPackageInstall generated an unexpected error
HERE'S THE ADDED EXPLANATION TO BRIAN'S POST THAT EXPLAINS THE SECURITY ISSUE:
This turned out to be an error for two reasons. First, after manually running the command in an "run as administrator" window (same error result), thinking it related to my anti-virus (turned that off/disabled firewall and A/V), and from this thread
granting my user administrative rights to files in an install folder and trying to reinstall inf files and drivers from C:\Windows\winsxs vs my copied infinst_autol.exe expansion (as found from log in C:\Users\David Samuels\AppData\Local\Temp\IPMx7\WIN7 folder).....that
there was an easier solution as the reason this error actually happens is a permissions problem.
To access the proper windows system folders - you have to be the TrustedInstaller service - not just in the administrator group...or you have to be the actual "Administrator" account. To become actual administrator on
your own laptop, Open a command window "run CMD.exe as administrator", then execute command
> net user administrator /active:yes
This creates a local PC Administrator account with no password. Coincidentally it has proper permissions to windows directories for installing drivers. Log in as this user, go to device manager and update the USB hub and any other drivers. if updating the
USB root - it doesn't replace it right away as the system cant disable the currently resident in memory "running" driver - you have to update, then restart the system, log in as administrator and repeat at the next lower layer that has issues.
Once completed - log in as yourself again and disable the administrator account in a command window with > net user administrator /active:no
This in my case enabled all my USB 2.0 and 3.0 devices on my originally only USB 1.0 laptop and everything else works properly again - I hope this helps many of you to resolve your own issues that were difficult to find and resolve and that got as far as
this thread. Good luck!
Regards,
Dave Samuels

Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code

I get this message when I check the Device manager for my Ipod
Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)
How do I resolve this I have reinstalled iTunes but it still doesn't recognise my ipod

I reinstalled Itunes a couple of times. I unistalled all programs that I never use, I updated all of my drivers, Windows swept my computer and found no problems. I have a yellow causion lite when I look at the USB-port with the phone connected. All other devices work without a problem.

Save for web & devices not working (CS4)

I noticed today that I can't save for web & devices any more. when I try it shuts down the program and gives me the following message to send a crash report:
Adobe has detected that the application Adobe Illustrator CS4 has unexpectedly quit.
this started as a Photoshop CS4 problem where I also can't save for web & devices any more. before people jump down my throat again for mentioning this Photoshop problem on the Illustrator forum - this is for context only. I have the same problem in both applications. I just include this information here in case it helps. the Photoshop message I get is:
The operation can not be completed.
savign for web & devices worked totally fine up till last night in Photoshop. haven't saved anything out of Illustrator for web & devices in a while but it used to work just fine.
I have a PC and use Windows 7. All my Adobe products are up-to-date.
Any help is much appreciated. Thx a lot!

thank you very much. at least it happened before. I was seriously doubting myself. tried trashing preference files multiple times, but that didn't help. will reinstall everything and see if that does the trick.
thanks again!

Book & software advice for creating a program that would utilize USB.....

Hey All,
I've been a mac user for about two years now and have become more and more impressed by the stability offered by Unix.
However, I still live in both worlds (XP and OSX) and my programming roots are windows based (sorry ).
Here's the problem:
I'm trying to determine which direction I should head for writing a program that gives me access to the USB ports on a Mac, and allows me to correlate it to a web atmosphere.
My thoughts are: I'd have a device attached to a USB port (or multiple), and I'd use a system (OSX) USB driver to write to a database, in turn - use dreamweaver to build a WEB that interfaced with this database.
I'm not sure what software I should use to write an app that can talk to my USB ports, as well as load them into a chosen database. I think once I have the data collected into a database, I can handle the WEB side of this, but I want to take this one step at a time.
I installed Xcode and I was ready to take off when I said - "wait a minute, this isn't exactly visual studio." [even though it's somewhat similar]
My programming background is in C++, VB and ASP (with VB script & Java Script) but I haven't written for about 3 years (hence the ASP and not ASP.net) - So feel free to steer me in the right direction or just give me a general verbal tirade and tell me I'm in over my head! LOL
I've bounced all over these message boards, and see everything from opinions on Java, C, C++, even Python (which I never heard of until a post yesterday: http://discussions.apple.com/thread.jspa?threadID=133836&tstart=0)
I'm asking for some advice on what books would be a good aid for me to purchase in order to help me achieve what I'm trying to do. I stopped in at my local Border's bookstore the other night, and there was quite an array to choose from.
So here is what I almost picked up for a starter:
http://www.amazon.com/gp/product/0764584111/103-2161547-3122203?v=glance&n=28315 5&n=507846&s=books&v=glance
Any suggestions?
Another major thought in my mind is the transition to little endian, which is what Intel uses (vs OSX big endian). Obviously, I don't want to get burned by this if I flip the wrong bit after the architecture changes....
I realize I may have really 'broad brushed' this, but I really wanted to hear everyone's thoughts since there may be other 'projects' I attempt to tackle on OSX.
Your suggestions on any books, sites, software, etc will be greatly appreciated......
Thanks for reading,
Steve
Powerbook G4 1.5Ghz Mac OS X (10.4.2)
Powerbook G4 1.5Ghz Mac OS X (10.4.2)

To start learning about writing a USB device driver on OS X, check out:
http://developer.apple.com/documentation/DeviceDrivers/Conceptual/IOKitFundament als/

I am looking for a device that will answer phone calls on my Mac. I have had a Phonevalet, and it is great, but it is no longer made.

I am looking for a device that will answer a landline phone. I have a Phonevalet, which answers, takes messages, has call block and is pluged into my Address Book, but it was discontinued, and I would like to add another line. Ovalabs made a similar device, but it also is gone. Is ther a way to use an Apple Modem to take calls? Any other product? The best part of the PhoneValet for me was it would announce the caller ID over my stereo (pluged into my Mac) and I could hear who was calling in my workshop and decide if I wanted to interupt the call.

I know I'm talking about expensive apps, but having been in prepress for about 30 years now, I really don't look at anything other than Quark XPress or InDesign for page layout apps. Your printing vendor will also be much happier with you when you use these products. Some areas of the U.S. tend to be mostly Quark oriented; others, InDesign. Ask your vendor what they would prefer, and if there are any free or cheap alternative apps they'll accept documents from.
Apple's Pages app (part of iWork) is a decent page layout program, but hasn't been updated in four years. It also doesn't support CMYK. If you place a CMYK image in the app, it will export out an RGB version of it. Not good! You can work with RGB images if you prefer, but your CMYK translations will be left to the skill of the print shop you use to do the conversions.
Don't even think about using Word. It has what it calls a page layout option, and does pretty much work like one, but there's no good way to import it into a real layout app such as InDesign. You end up paying the printer for their time to rebuild your entire project in either XPress or InDesign so they can actually do something with it.

Expanding Control for One Device to Ten Device

Hi
Right now I'm working on a project where I have to modify the LabVIEW code written by someone else. The code is already proven to work for just one device, and I have to figure out a way to make it such that can control ten devices. I'm thinking of using the current code, and adding a drop-down box with device names 1-10 and when clicking on each individual one, the input and indicator values will change accordingly.
However, I have a few questions about implementing this.
How do I handle the DAQ assistances such that when I change the device number in the drop-down box, that I don't change the actual input, only have the input shown (i.e. make sure the input to the actual devices are what I want but it only shows on the front panel the values for whatever device number I select). Would I need multiple DAQ assistances?
With regards to the drop-down menu, would a normal drop-down menu be best, or is the better option to go with an enum or a listbox?
Thanks

Try avoiding multiple DAQ assistants. Actually, I would recommend using the DAQmx VIs instead, because, they offer more control and higher performance. If you would like to keep using the DAQ assistant, you can follow this instructions, simply add more channels using the blue plus icon. Make sure the device name in MAX and the DAQ assistant match with the hardware. If you have problems with this use the green arrow, on the channel settings section, and select the physical channel that you are targeting. I hope this helps.
Alejandro | Academic Program Engineer | National Instruments

Flash Design for Mobile Devices May Workshop

I'll be running a 2 day workshop in San Francisco on
Flash Design for Mobile Devices in May.
Please forward this announcement to anyone who might be
interested.
Details are below.
Thanks,
Nader Nejat // CEO
Omega Mobile //
http://www.omegamobile.com
Accelerating profit through stunning mobile experiences
==========================================
What:
Flash Design For Mobile Devices
When:
2 days: Saturday, May 6 & 13, 9am — 5pm
Where:
San Francisco State University Downtown Center
Multimedia Studies Program
425 Market Street, 2nd Floor
San Francisco, CA 94105
For more information and to register:
On the Internet go to:
http://msp.sfsu.edu
Or, call: 415.405.7700
Flash Design For Mobile Devices
In the era of rich mobile media development, your mobile
future is here. Now, learn how to create it in this hands-on
workshop.
We'll give you all the information and practice you need to
be on the
cutting edge of creating Flash content for PDAs, mobile
phones and next
generation devices. We'll explore the mobile Flash landscape
by looking
at working prototypes and actual applications that leverage
the current
mobile Flash player technology.
In this class, each attendee is assigned their own computer
to work on.
Discussions are followed by exercises that show you exactly
what you need
to know to produce your own mobile content. We emphasize
creating great
mobile multimedia experiences for cell phones using Flash
Lite.
In addition to exploring development opportunities available
today, you'll learn:
• The capabilities and limitations of Flash for mobile
development.
• Best practices for planning your mobile projects.
• How to efficiently convert Flash projects to mobile.
• The entire production process from planning to
testing and debugging on the device.
• How to create engaging content and user experiences
for small screens.
• How to maximize memory and processor performance of
your applications.
• How to develop for multiple devices with minimal
changes.
• To tap into resources to get you started quickly
• About handy third party utilities.
Who should take this class?
Anyone interested in developing rich media content for mobile
devices
including: mobile developers interested in Flash as a
potential delivery
platform and interface designers who want to use Flash for
mobile design,
Flash developers who wish to leverage their skills for mobile
development,
web designers who want to take advantage of the next big
medium and anyone
interested in Flash's capabilities for mobile devices.
Prerequisite: Flash I or equivalent experience recommended.
Course #: MULT 9234
Schedule #: 26264
Section: Z01
Hands on, 1 student per computer
2 days; Saturday, May 6 & 13, 9am — 5pm
SFSU Downtown Center, 425 Market
Fee: $395.00
Register Now! Call 415.405.7700

Anything similar available in UK?
"..Nader.." <[email protected]> wrote in
message
news:[email protected]...
> I'll be running a 2 day workshop in San Francisco on
> Flash Design for Mobile Devices in May.
>
> Please forward this announcement to anyone who might be
interested.
>
> Details are below.
>
> Thanks,
> Nader Nejat // CEO
> Omega Mobile //
http://www.omegamobile.com
> Accelerating profit through stunning mobile experiences
>
> ==========================================
>
> What:
> Flash Design For Mobile Devices
>
> When:
> 2 days: Saturday, May 6 & 13, 9am ? 5pm
>
> Where:
> San Francisco State University Downtown Center
> Multimedia Studies Program
> 425 Market Street, 2nd Floor
> San Francisco, CA 94105
>
> For more information and to register:
> On the Internet go to:
http://msp.sfsu.edu
> Or, call: 415.405.7700
>
> Flash Design For Mobile Devices
> --------------------------------
> In the era of rich mobile media development, your mobile
> future is here. Now, learn how to create it in this
hands-on workshop.
> We'll give you all the information and practice you need
to be on the
> cutting edge of creating Flash content for PDAs, mobile
phones and next
> generation devices. We'll explore the mobile Flash
landscape by looking
> at working prototypes and actual applications that
leverage the current
> mobile Flash player technology.
>
> In this class, each attendee is assigned their own
computer to work on.
> Discussions are followed by exercises that show you
exactly what you need
> to know to produce your own mobile content. We emphasize
creating great
> mobile multimedia experiences for cell phones using
Flash Lite.
>
> In addition to exploring development opportunities
available today, you'll
> learn:
> ? The capabilities and limitations of Flash for mobile
development.
> ? Best practices for planning your mobile projects.
> ? How to efficiently convert Flash projects to mobile.
> ? The entire production process from planning to testing
and debugging on
> the
> device.
> ? How to create engaging content and user experiences
for small screens.
> ? How to maximize memory and processor performance of
your applications.
> ? How to develop for multiple devices with minimal
changes.
> ? To tap into resources to get you started quickly
> ? About handy third party utilities.
>
> Who should take this class?
> --------------------------------
> Anyone interested in developing rich media content for
mobile devices
> including: mobile developers interested in Flash as a
potential delivery
> platform and interface designers who want to use Flash
for mobile design,
> Flash developers who wish to leverage their skills for
mobile development,
> web designers who want to take advantage of the next big
medium and anyone
> interested in Flash's capabilities for mobile devices.
>
> Prerequisite: Flash I or equivalent experience
recommended.
>
> Course #: MULT 9234
> Schedule #: 26264
> Section: Z01
>
> Hands on, 1 student per computer
> 2 days; Saturday, May 6 & 13, 9am ? 5pm
> SFSU Downtown Center, 425 Market
> Fee: $395.00
>
> Register Now! Call 415.405.7700
>

Keep Airplay from asking for password for same device.

I am currently at a friends place who has a airplay divice in its network. For some reason my computer keeps asking me every 15 minutes for the password for this device. This is quite anoying as I can't keep it from happining and have no idea what is causing it. The ownly programs that are running at the moment are Safari, Fantastical, Dropbox and Divvy.
How do I keep my computer from trying to connect to an airplay device on its own.
Thanks for your help.

http://docs.info.apple.com/article.html?path=Mail/4.0/en/9959.html
This kb refers to mail asking for a password, but the fix is what you want - use keychain access to set your login keychaing to unlock on login and to NOT lock automatically again. That way, when you login with your password, your login (main or primary) keychain will also be unlocked and will stay unlocked as long as you are logged in.

Save for Web & Devices problems

Hi. I have sliced all my pieces in PS. I then went to Save for Web and Devices. For some reason my slice tool cannot be grabbed (I click on it and it doesn't turn to slicer). Also, the color table is all gray. No colors. I am going nuts! I have tried everything to make them appear.
I am very new to PS. I am taking a DW class (didnt know I had to have extensive knowledge in PS first, so now learning both programs for school), and my project was due last night. I need to hand it in Thur night but I can't do the things I need to in order to get it ready for DW.
Please help somebody! Thank you so much!
Penne

There is no slice tool inside Save for Web and Devices dialog, you should slice the image first and then select File > Save for Web & Device
You can get help from this page:
http://help.adobe.com/en_US/Photoshop/11.0/WS9E2C7F1A-87C0-4dae-9C0C-0C2B3C566F84.html

JavaPOS for Ingenico Device Programming

Similar Messages

Maybe you are looking for