JAXB DTD and XJS element specification

I have a DTD with the following element declaration:
<!ELEMENT PersonIdentifiers ((GvtNbr, (IdSateNbr, IdStateCd)?) | (IdStateNbr, IdStateCd))>
GvtNbr, IdStateNbr, and IdStateCd are all #PCDATA
How can I structure my XJS in order that I don't just have to call getContent() and then search for what I want?

Have you tried an interface, which would consist of an IDStateNbr and an IDStateCd?
the only problem with your setup and jaxb right now is that jaxb will choke on validation, if your optional element isn't present. hopefully, this bug will be fixed when the 1.0 version comes out, later this year...

Similar Messages

  • I have recently purchased a new computer and photoshop element. It looks like its downloaded it but I don't know how to access it. it says file are ready...down load files have been extracted and saved to folder....launch PS elements and open specific fol

    I have recently purchased a new computer and photoshop element. It looks like its downloaded it but I don't know how to access it. it says file are ready...down load files have been extracted and saved to folder....launch PS elements and open specific folder. it looks like it downloads. It then keeps taking me back to this page. Im not sure where to go next

    if you have a win os you should have dl'd an exe and a 7z file.
    put both in the same directory and double click the exe.

  • I have downloaded, extracted and installed Elements 12 but it will not open nor can I find the Adobe file in the file where I installed it to..  When I've tried to download and install again

    I have downloaded, extracted and installed Elements 12 but it will not open nor can I find the Adobe file in the file where I installed it to..  When I've tried to download and install again it says that the "Object Already Exists."  It may exists, but it is not visible in the file or in my list of programs on the Startup Menu.

    cactisken
    You should not have to uninstall Premiere Elements 12/12.1 in order to install and run Premiere Elements 13 on the same computer unless your computer is overloaded and the computer resources are compromised. Just use one program at a time.
    Can you still use 12/12.1 on this same computer that will not let you use 13?
    What specific Window operating system are you using?
    Let us go through the usual drill...
    1. Does the problem exist with and without the antivirus and firewall(s) disabled?
    2. Are you using a pen and tablet device instead of a mouse?
    3. Did you install the program with antivirus and firewall(s) disabled?
    4. Disable the SLCache Folder found in Windows 7, 8, or 8.1 64 bit
    Local Disk C
    Program Files (x86)
    Common Files
    Adobe
    and in the Adobe Folder should be the SL Cache Folder that you delete or disable by renaming the Folder
    from SLCache to SLCacheOLD.
    5. Are you running the program as Administrator and is the latest version of QuickTime installed on the same
    computer as Premiere Elements 13?
    Let us start here and then decide what next.
    Thank you.
    ATR

  • Creation of project definition and wbs element

    I want creation of project definition and wbs element upto 4 level using bapis.
    i am using transaction cj27,cj01,cj02
    which function module to use for this??

    Hi,
    to create project definition with customer fields the BAPI you should use is : BAPI_BUS2001_CREATE
    to create WBS elements with different levels and specific fields the BAPI you should use is BAPI_BUS2054_CREATE_MULTI
    these bapi must be used in the sequence of call :
    BAPI_PS_INITIALIZATION
    BAPI_BUS2001_CREATE / BAPI_BUS2054_CREATE_MULTI
    BAPI_PS_PRECOMMIT
    BAPI_TRANSACTION_COMMIT
    before using the bapi, you must apply OSS note :
    637345 - Syntax error with enhanced PS tables
    i sent you the oss note to your mail
    please reward points if helpfull.

  • I have new Adobe premier Elements13 and Photoshop elements 12, but Cannot access website to generate code and register

    I have new Adobe premier Elements13 and Photoshop elements 12, (Download from Amazon) but Cannot access website to generate code and register. Please help if you can.
    I do not know how to find my PC specific code, nor can I simply use another PC if the programs are then only for use on that (not my main) PC!. I have entered the correct serial/codes which came in the download files but simply cannot go further as each time I try it fails to connect with the website?
    Vince

    Please post Photoshop Elements related queries over at
    http://forums.adobe.com/community/photoshop_elements

  • How can I make a folder structure for both PSE and Premiere Elements?

    I have recently bought bundled PSE 10 and Prem Elements 10 ... (but have been using PSE6 for years)
    I have lots of jpeg photos on an external drive in folders with a heirarchical structure eg. Pictures ... Friends ... 2011 ... 2011_12_02_Margate_seagulls.jpg  I also have loads of photos that are simply there waiting to be sorted and are in their native format e.g PIC_6120.jpg     Additionally I have .MOV files dumped from my JVC standard def camera some of which are custom named, others are left as is.  I now own a hi-def lumix which takes great jpgs and also video MTS files. After lots of searching on the net for the best way to get all this organised I am at a standstill. I feel that I need an external folder system (ie one that does not rely 100% on adobe and its categotries and tags) because I have had catastropic losses when using earlier photoshop progs. I also see the benefit of using tags. So...
    Is there a simple (and best) way to order my photos and hi-def video while taking into account content I already have shot/videod?  I am happy to hear reasons and see examples why I should trust PSE/Prem E - but I would also like to see if it makes sense to use folders. Ideally i would love a practical folder structuring method that incorporates both video and still content. I have posted here because it is important I organise my video better and have a flexible system that allows for drafts and reworking my Hi-def content.
    I have tried to find the info but it is so piecemeal and I have faith in the people on here ... Any links and advice would be much appreciated

    In generic terms there are three methods of filing just about anything:
    Structured by event
    Structured by type
    Unstructured
    Event might be occasion or date or a specific project. For this type of structure you would store all your assets related to that event, regardless of whether it is still, image or audio, in one place.
    Type would typically be by the type of asset. All your videos in one place, stills in another, audio in another  etc... In business for example in the eighties (when personal computing became prevalent in the workplace) staff would religiously have all their word processor documents in one place, spreadsheets in another, powerpoints in yet another etc.... Dreadfully inefficient.
    Unstructured would be a case of storing things wherever you liked and accessing them via tags or albums - but you've said you want to avoid this.
    Personally I let the application store things according to the defaults for the different import types but then tag them. Essentially I follow the 'unstructured' style. For anything major I create a project directory and move all the project assets into it (i.e. selective structure by event).
    If you search the Tips & Tricks forum I think Bill Hunt (who does this stuff for a living) describes his structured folder flow in great detail.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children

  • Possible to add and persist elements in server config, for use by cons ext?

    I'm considering what will be my obstacles if I try to write a console extension that we would use to view excerpts of an application log file, the application of which is deployed to each server in our domain(s). It doesn't log to the WebLogic server log, it writes it to an external log file (through log4j), and each server (several servers on each box) uses a slightly different path to its log file.
    One issue that I'll have is getting the console extension to know what the path to the log file is. I think the best way, over all, is just to have the user enter the path in the form presented by the console extension. My problem is how to persist that setting, because I'd prefer they didn't have to enter that every time they entered the form.
    Several years ago, I wrote a console extension for WL 8.1.4 which had a similar issue. I ended up simply writing the setting into a properties file inside the extension WAR. This only works (I believe) if the WAR is deployed exploded. I could do that, but I don't like that idea very much.
    What would be nice is if I could "extend" the server config.xml with an additional element in the "Server" element, where I could store this information. Unfortunately, I don't see any support for doing something like that.
    Another alternative I'm considering is whether it's possible to extend the "Summary of Log Files" page in "Diagnostics" with an application-specific log file, but I don't see any way to do that.

    Well, I appreciate the suggestion, but it's not exactly a secret, to me at least. I've used it for human-readable things recently. It occurred to me that that might be my only option, but I certainly wasn't going to assume that. As it seems like this is likely my only option, I guess I can see some interesting conventions for dealing with this. You have to assume that the field could be written to by other code, and that code would have to make the same assumption. I guess I'd have to define a certain XML element as the root of my structure. If I find it, that region between the start and end element is mine to use and modify. If I don't find it, I'll insert my element at the end of the field value.

  • How to build DTD for this element

    How to write DTD for an element which has character data and child element?
    I am trying to write DTD for "paycode" element:
    <paycode lookup="name" source="RT">OT
      <rate type="BASERATE">1.0</rate>
    </paycode>So i have written this so far:
    <!ELEMENT paycode (rate)>
    <!ATTLIST paycode
         lookup (name|code) "code"
         source CDATA #REQUIRED>Where I am going to specify that paycode has character data as well (in my xml its "OT")?
    Thanks

    But when i define my xml as :
    <rules>
    </rules>
    and open it in IE 6.0, the Internet Explorer doesnot
    give me any error message. Any reason?Is the InternetExplorer supposed to validate your XML
    ? I doubt that.
    The XML in itself is valid as long as it matches the
    basic XML syntax rules ("well-formed"). The structure
    matters only when it gets validated against a
    DTD.On http://www.w3schools.com/dtd/dtd_validation.asp webiste it said that "Internet Explorer 5.0 can validate your XML against a DTD."

  • How does the image time stamp display /modification vary among Bridge, Photoshop, and PS Element Org

    I've noticed some discrepancies between times recorded in my image EXIF data as well as the time displayed with images in Bridge and Photoshop Elements Organizer.  For instance I may have a series of images shot within a few minutes of each other.  After having done some manipulation of a subset of the images and later on showing the sequence in both Bridge and PSE Organizer, I have noticed that the time associated with some of the images has changed.  Bridge and PSE Organizer may actually show times that differ by several hours.  It almost looks like the time is converted from the original camera time to UTC and then possibly back to the time zone where my computer is located.  The pattern is not completely consistent and may depend on what Adobe products have been used to adjust or catalog the images.  I'm looking for a good and complete description of how each product handles the image date and time stamp.  I suspect that there is some inconsistency in how this is done across the products.  I'm currently using Bridge / Photoshop CS6 Extended and Photoshop Elements Organizer 10.0 which were recently upgraded from CS 5 and 8.0 respectively.  I also use Adobe Camera Raw 7.1 to edit the Nikon raw files.  This problem appears to predate the upgrade of my products.

    Well, it must be a system-specific bug of some sort that's been introduced, because I was able to create a 4200 x 3500 image made by mapping an image of similar size to a cylinder, and the cylinder would move/rotate in real time.  Of course, I have a completely different video card and system than you do, but I'm just verifying that it's not broken everywhere.
    Rendering isn't hugely fast, but that's not unexpected with a larger image.
    Maybe being more specific would help.  Is your mesh complex?
    Is it something you'd be willing to share online or describe how to create?  I would be happy to try to match what you're doing more thoroughly to see whether I can reproduce the slowdowns.
    Beyond that, I'm not sure what to suggest...  You don't have a lot of RAM to be working on 15 megapixel images, but as you say the thing to concentrate on is that you're seeing quite different performance from the Ps CS6 beta version.
    -Noel

  • Will Adobe Photoshop Elements 10 and Premiere Elements 10 work on Windows 8.1

    Will Adobe Photoshop Elements 10 and Premiere Elements 10 work on Windows 8.1

    Hi,
    Here is my reply:
    •What version of Premiere Elements? Include the minor version number (e.g., Premiere Elements 12 with the 12.0.1 update).
    Premiere Elements 12
    •What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac"
    Windows 8.1.
    •Has this ever worked before?  If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.?  Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
    Worked in windows 8. No plug-ins added, etc.
    •Are you using an account with Administrator Privileges?
    Yes
    Run as Administrator http://forums.adobe.com/thread/969395 (Encore + "All" Premiere)
    Crashes after loading
    •Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
    All up to date
    •If you are getting error message(s), what is the full text of the error message(s)?
    Please log-in with an administrator account to use Premiere Elements
    •What other software are you running?
    None
    •Tell us about your computer hardware. How much RAM is installed?  How much free space is on your system (C:) drive?
    4gb ram. 30gb free space on internal SSD drive.
    •Which version of Quicktime do you have installed?
    Latest
    What is your exact brand/model graphics adapter (ATI or nVidia or ???)
    Radeon HD 3400
    What is your exact graphics adapter driver version?
    8.970.100.0
    Have you gone to the vendor web site to check for a newer driver?
    Yes
    P.S. Premiere Pro works on my system
    Thanks

  • Upgrade from premiere elements11 and photoshop elements 11 to version 12

    Hello i think I buy te upgrade from the packket premiere elements 11 and photoshop elements 11 to version 12 of this to produkts, when I do that create the upgrade then  new icons on your desctop screen or overwright the upgrade the version 11 total, must I remove version 11 before or can I do that after the upgrade to version 12.
    Thanks
    Vanelli014

    Vanelli014
    I do not believe that you mentioned what computer operating system you are using for your Premiere Elements 11 and 12.
    Although Photoshop Elements 12 may be lacking some of your Photoshop Elements 11 features, Premiere Elements 11 and 12 are essentially the same,  but 12 does give a few additional features which may or may not be necessary for your present or planned workflows.
    Photoshop Elements/Premiere Elements 11 and 12 perform the same and well for me on Windows 7 64 bit. I cannot say the same specifically for Premiere Elements 12 on Windows 8 or 8.1 64 bit. Premiere Elements 11 is performing fine on this same Windows 8 or 8.1 64 bit where Premiere Elements 12 is not.
    Just beware of any intergration perks that you might lose if you decide to pick and choose the best by mixing the combos, that is Photoshop Elements 11 with Premiere Elements 12 or Photoshop Elements 12 with Premiere Elements 11.
    Bottom line: I would ask you to consider leaving the both versions installed until you decide what programming is in the best interest of your workflows. Key...use one Premiere Elements program at a time.
    We will be looking forward to learning of your progress.
    ATR

  • Any problems using different versions of photoshop elements (7.0) and premiere elements (8.0)?

    I already own Photoshop Elements 7.0 and am now considering buying Premiere Elements 8.0. Does anyone know if I will have any version problems with this, especially with the Organizer? Do I need to upgrade PSE to 8.0 as well?

    1- A forum participant tested that slideshow workflow from Photoshop Elements 7 to Premiere Elements 8 and verified that it worked for him.
    2 - General Organizer use is probably an entirely different question.  I have not attempted that myself and don't know anyone who has. It seems doubtful that a specific catalog file could be shared between Premiere Elements 8 and Photoshop Elements 7.
    3 - Since you mention that you are interested in upgrading to Premiere Elements 8, I recommend that you read relevant FAQs from the FAQ forum here, starting with
    http://forums.adobe.com/thread/533334?tstart=0
    http://forums.adobe.com/thread/503270?tstart=0

  • Photoshop elements and premiere elements for mac in spanish?

    Hello I´ve change from PC to MAC and I want to buy the new version elements 13 for Mac, but when I go to buy it I haven´t got the spanish option... Do you know if I download it in english I can change it before to spanish???
    Excuse me for my english I hope you can understand me

    Maria.garcia.arcos are you purchasing Photoshop and Premiere Elements 13 from Adobe directly?  If so multiple languages should be supported.  I would recommend contacting our support team directly at Contact Customer Care if you have any questions regarding your specific order.

  • Iphoto and pse elements 9 events original and modified

    Hi I am new to iphoto and adobe elements 9 so please accept my apologises if this is answered eleswhere.
    I have set up iphoto with the library to store my photos and set up in prefs. to use elements as editior.  I can click on edit when on a photo in either events or photos and edit with elements then save and the photo is sent back to iphoto. All this is ok.  When I view my photos in either photo or event i see two photos the original and the edited one.  I have follwed the path of each photo back the photo on the left for example can be revealed in finder as the original, the photo on the right can be revealed in finder as the orginal and the modified.  Both orignals are revealed as the same photo so only in one place.  Can I get events to only show the modified photo not both oginal and modified.  The only way I can see is to hide the original.  I have followed carefully all the editing instructions in the discussions and i believe to be doing this correct.  As soon as I click on edit I see a duplicate photo apear then elements opens and I do my editing and then save (not save as) and the photo goes back to iphoto as modified image.  To sum up I have only one original and one modified stored in iphoto but both are in events when viewing events.
    Thanks for any help given.

    Suggest that you delete preferences:
    Preference settings control how Photoshop Elements displays images, cursors, and transparencies, saves files, uses plug‑ins and scratch disks, and so on. If the application exhibits unexpected behavior, the preferences file may be damaged. You can restore all preferences to their defaults.
    Press and hold Alt+Control+Shift immediately after Photoshop Elements begins launching. Click Yes to delete the Adobe Photoshop Elements settings file. 
    A new preferences file is created the next time you start Photoshop Elements. For information on a specific preference option, search for the preference name in Help.

  • Elements 12 organizer has stopped working and premiere elements 12 get msvcr80.dll missing errors

    elements 12 organizer has stopped working and premiere elements 12 gets msvcr80.dll missing errors

    First deactivate the product(s) and then uninstall it from the machine using the procedure specifically for your OS.  If in Windows and I suspect it is then uninstall from the Control Panel.
    To deactivate the product you need to go Editor and then:
    Help >> Deactivate
    Please also make sure that you have your original CDs and /or DVDs handy including the necessary serial number as you will need them to install the product(s) again.
    After uninstalling the products, you need to restart the machine before you start to install again.
    You have created the backups of your sentimental photos, right?  You need to just in case the machine causes more problems down the line.
    G/L

Maybe you are looking for