Jaxrpc client (how to set connection and read time out)

I have a jaxrpc client using a web service. how to set a connection or a readtime out on the client side so that I can terminatate the service if it does not respond on some time.

SteveHibox wrote:
When we tried to send messages to [email protected] ,the debug log on MTA shows that if the first mail server(123.1.1.1) failed , the MTA tried to connect the second server(123.1.1.2) automatically. And it took about 3 minutes until the connection to the first server timed out.
The OS level timeout (tcp_ip_abort_cinterval on Solaris) is applicable to this situation. It is set to "180000" (3 minutes) by default e.g.
bash-3.00# ndd -get /dev/tcp tcp_ip_abort_cinterval
180000
Is there any way to shorten the default time out ?( I mean to connect the second server faster if the first one failed.)Try changing the OS level parameter.
If there is only a particular IP address causing the problem, you may want to make use the IP_ACCESS mapping table and the $I flag to skip over this IP address:
http://docs.sun.com/app/docs/doc/819-4428/gekyh?a=view
Regards,
Shane.

Similar Messages

Setting Connection and Read time outs for SOAPConnection

Below is the code I am using to connect to a web service. I need to set connection timeout and read timeout for the SOAP Connection. I have the solution with using system properties. But my project demands the solution without using system properties. I have gone through google and found the below page
http://forums.sun.com/thread.jspa?threadID=5117465&messageID=9404850
which is useful but I am confused to implement. So help me out in solving this issue.
protected SOAPMessage sendSOAPRequest(SOAPMessage message, String recipient) throws Exception {
URL urlEndpoint = new URL(recipient);
SOAPConnectionFactory scf = SOAPConnectionFactory.newInstance();
SOAPConnection con = scf.createConnection();
SOAPMessage replyMessage = con.call(message, urlEndpoint);
return replyMessage;
}

I have the same problem for a few days now. Most sites open quickly but any new pages take ages to load. I usually give up if refresh wont help ?

How to set SAP idle session time out

Hello gurus,
      I want to know how to set the time to terminate idle SAP session. What is the parameter and what is the T-code to access that parameter?
Thanks and Regards,
Rahul

Hi Udvadia
Maximum work process runtime parameter
rdisp/max_wprun_time                        600
If its a portal or something else it might differ, above parameter is for a regular work process in a SAP Netweaver installation.
This can be set in the startup profile of your system using transaction RZ10.
*Indeed dynamic parameters do not require stop/start
Reward points if useful.
Kind regards
Tom
Message was edited by:
        Tom

How to set per user session time out.

Hi folks,
I am trying to set longer session time out to selective users with the following line, but it turns out setting this time out for the whole app. Is there a way to change the session time out per user only?
request.getSession(true).setMaxInactiveInterval(172800);
Billy

Well, there's the rub. If you want more control over session handling, you have to take the good with the bad. My suggestion is to use a good open source caching solution and let the cache evict entries for you. You should be able to specify both an interval over which data goes stale and/or the maximum size you want the cache to reach. Really, a session is just a specialized form of caching anyway.
http://java-source.net/open-source/cache-solutions
- Saish

How to set a sql query time out with jdbc:oracle:thin

should i change the JDBC driver with jdbc:oralce:XA:thin or other driver with XA?

SQL query timeout may be set with setQueryTimeout.
http://java.sun.com/j2se/1.4.2/docs/api/java/sql/Statement.html#setQueryTimeout(int)
A query timeout bug is fixed in Oracle JDBC Drivers release
10.1.0.2.0 (10g)
FIXED BUG-2249191
In the Server Internal Driver, setting the query timeout does not
+(and likely will never) work. The query execution will not be+
canceled when the timeout expires, even if the query runs forever.
Further, after the query returns, the execution of your code
may pause for the length of the timeout.
http://www.oracle.com/technology/software/tech/java/sqlj_jdbc/htdocs/jdbc_readme101020.html

How to set-up and use FAMILY Sharing

Can someone please explain to me in detail how to set-up and use FAMILY Sharing, none of the information I have so far found in the documentation helps at all, in fact it puts you in a constant loop giving the same information over and over again
We have quite a few devices from ipads, iphones and ipods and I need to set-up Family Sharing.
We have our main Apple ID which is linked to our Payment method, I have now got my son a new iPad, I have created his Apple ID and set-up a link via FAMILY Sharing to our main Apple ID.
From what I read we should be able to share our purchased Apps between family members.
So I figured I would be able to get the Apps now via iTunes that are part of the FAMILY Sharing, however when I go into ITunes (latest version downloaded yesterday) I can only see the Home sharing menu item not FAMILY Sharing, so I cannot work out in Itunes how to get Apps that are FAMILY shared. So ok I will try and get Apps directly via the Ipad using the App Store. To test it is working I look for a known paid for App, I then go to download it and it is now asking me to pay for it again.
Can someone please explain to me in detail how FAMILY Sharing is supposed to work and how I get it to work please.
Thanks for your help
Greg

Hey GregWr,
Thanks for the question. The following resources provides some of the best information regarding Family Sharing. Included, you’ll find information on making sure the accounts are set to "Share my purchases”, as well as information on downloading Family Member purchases from the iTunes Purchased section. Please note that some applications are not shareable.
Sharing purchased content with Family Sharing - Apple Support
http://support.apple.com/en-us/HT201085
Which purchased content can I share using Family Sharing - Apple Support
http://support.apple.com/en-us/HT203046
If you don't see your family's shared content - Apple Support
http://support.apple.com/en-us/HT201454
Thanks,
Matt M.

How to set up and configure AirPort Express for AirPlay and iTunes

Saw somewhere that supposedly there were some apple written guidlines on the above topic. I have searched all over for them. Anyone know where I can get a copy to read through. Just trying to educate myself a bit and sety up another room with access to itunes, radio, etc with high quality speakers and amp off my express.

Here you go ...
How to set up and configure AirPort Express for AirPlay and iTunes

How to set up and use AirPlay

How to set up and use AirPlay

Welcome to the Apple Community.
AirPlay; When watching suitable content on the iPad, tap the screen to bring up the controls, tap the AirPlay icon and select the Apple TV. The content will then stream to the Apple TV.
Mirroring; Double tap the home screen button, swipe the application panel to the right, tap the AirPlay icon and choose the Apple TV. The iPad screen will then be streamed to the Apple TV.

How to set upper and lower limit for service notification in SPRO

Hello everyone,
Good morning....!!
I am new to SAP PM and to SCN as well.
I have a question on Service notification user status.
I have notification profile configured in SAP as below:
Status no      Status          Short text              Lower limit          Upper limit
5                  REGD          Registered                1                          70
10                PCKS            Pack sent                  1                          70
20                APRC            Application received 1                        70
etc..
I want the statusesto be set as navigation should only allow to go back one by one...like from APRC -->PCKS not to REGD.From PCKS -->REGD etc..not vice versa.
Can enayone explain me to how to set lower and upper limits for these according ot the above requirement.
for more details please check my attachment.
Thanks in advance..!!
Regards,
Sudha.

Once you change the status to previous status, just save the order. Then again open the order & try to change the user status.
Just I made replica of your profile. I could able to change (even without saving the order).

Having trouble opening connections and reading from Bluetooth devices.

Hello,
As the title states, I am having trouble opening connections and reading data from a Bluetooth device. We are using a PDA to communicate with LabVIEW. First, the Bluetooth Open Connection VI displays a timeout error half of the time. Second, when it does open, it does not read what the PDA is sending. Third, if it does allow an open connection, it will not do it a second time unless the devices are turned off.
I also have another related question. I am using a Linksys Bluetooth USB adapter, and the driver is proprietary. Labview requires the use of a Microsoft driver, and we are having problems going back and forth between the drivers. What Bluetooth receiver would you suggest using? The reason I ask is the fact that you have Bluetooth examples of client VI's. Therefore, you must use a similar device. Thank you for your time.
-Jon

Hi Jon,
I'm not sure what Bluetooth receivers were used to verify the functionality of the VIs. However, I still want to help you solve your issue. Please make sure that you are running the shipping examples and let me know what version of LabVIEW, what PC OS and what PDA OS you are using. Does the Microsoft driver work for your Bluetooth receiver if you uninstall the Linksys driver?
With your answers I'll do my best to help you out.
- Philip Courtois, Thinkbot Solutions

How to set date and time on apple tv

how to set date and time on apple tv

Assuming this is not the first time you have used your Apple TV
    1.    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    2.    Also try restarting the router.
    3.    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If this is a new Apple TV, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

How do I connect and use a travel drive

How do I connect and use a travel drive

I don't believe you can, but there are free services out there, such as dropbox that can accomplish much the same thing.

How do i connect and open itunes from my computer

how do i connect and open itunes from my computer

Organize the library from within iTunes, right-click any song, show it in the Windows Explorer, quit iTunes, go into the Windows Explorer, navigate up to the iTunes folder, drag that to the external drive, launch iTunes with the Shift key hald down, and point it to that instance of the library.
(82828)

How can I download and read a SWF file on IPad 2? The message returned is that Safari cannot download that file

How can I download and read a SWF file on IPad 2? The message returned is that Safari cannot download that file

SWF files are flash files, which are not supported on the iPad : http://www.apple.com/hotnews/thoughts-on-flash/
If you want to play the file then the iSwifter or Skyfire browser apps might work (they don't work on all flash sites) but you won't be able to download it

Every time I try to download a game on my iPad it says please verify your account and follow the intrustion now I have a email n password set up and every time I click send it to my email there is nothing how do I acces this pla

Every time I try to download a game on my iPad it says please verify your account and follow the instructions now I have a email n password set up and every time I click send it to my email there is nothing how do I acces this please

Hi Mark ohara,
Welcome to the Support Communities!
The following articles will help you with your Apple ID verification:
Frequently asked questions about Apple ID
http://support.apple.com/kb/HT5622
Click on My Apple ID to access and edit your account. You will be prompted to verify your email address.
Apple ID: Associating and verifying email addresses with your Apple ID
http://support.apple.com/kb/he68
I hope this information helps ....
Have a great day!
- Judy

Jaxrpc client (how to set connection and read time out)

Similar Messages

Maybe you are looking for