JCA Resource Adapter Deployment in OAS 10.1.2

Hi,
I have installed the Oracle Application Server 10g Release 2 (10.1.2) (j2ee & web cache) and I want to know how I can deploy a JCA Resource Adapter. Until now I have work with Oracle Application Server 10g Release 3 (10.1.3.1.0) and this version has a section in the administration web (applications->Standalone Resource Adapters) where I can deploy the RA.
But now, I have to deploy a Resource adapter in OAS 10.1.2 and I don't know how to do it. Any help?
Thanks,
Miquel

Is there any error or warning message in WLS server log related to your adapter? WLS may ignore some properties if found non-fundamental error.

Similar Messages

JCA Resource adapter deployment in Weblogic server

Hi,
I have deployed a resource adapter successfully in Weblogic server and works fine.My resource adapter has weblogic-ra.xml and ra.xml available under meta-inf folder.I have provided some properties in weblogic-ra.xml and ra.xml but unable to see the same properties when i open the resource adapter settings page in the the weblogic administration console
I want to change resource adapter properties from weblogic adminstration console but dont see the properties which i used during deployment.
Can someone help with identifying the issue or if i have to do something different.
Appreciate any help.
Thanks
S

Not sure what might be causing this behavior. Property values in ra/weblogic-ra.xml should be displayed on the console (http://machine:port/console). I think I have experienced similar issue only to realize that console only displays 10 properties and other properties are displayed after pressing Next link on the page.
How many proprieties you have? What are getting displayed and what properties are not getting displayed?
Manoj

I need Fusion help creating a demo of BRM JCA Resource Adapter

I need Fusion help creating a demo of BRM JCA Resource Adapter.
I know BRM well but am clueless with Fusion.
I am trying to figure out what Fusion products to download and install and how I manipulate the Fusion side to manipulate BRM.
My BRM docs say:
Installing the BRM JCA Resource Adapter ->
Software requirements
(yada yada install a bunch of BRM stuff I know how to do)
The adapter must be deployed on a J2EE 1.4-compliant application server that has implemented the JCA 1.5 specification. The adapter runs only in a managed environment. (Does this imply some particular Fusion package?)
(more yada yada about installing more BRM packages I know how to do)
Deploying and configuring the BRM JCA Resource Adapter ->
Overview of the BRM JCA Resource Adapter configuration procedure
The procedure for setting up the BRM JCA Resource Adapter includes the following tasks:
Installing the adapter on your BRM system, if you have not already done so. See Installing the BRM JCA Resource Adapter.
Generating the schema files for the adapter. See Generating the schema files for your system. (links to some BRM commands np)
Specifying how to construct XML tags. See Specifying the XML tags for extended fields. (links to an oob file included with directions on how to address BRM customizations np)
Generating the WSDL files for the adapter. See Generating the WSDL files for your system. (links to an oob file with directions to configure. I could use some help if/when I get this far)
The last two look pretty important but I haven't a clue. I pasted the text from the docs below.
Deploying the adapter on your application server. See Deploying the BRM JCA Resource Adapter on an Oracle application server.
Connecting the adapter to the BRM software. See Connecting the adapter to BRM in Oracle AS.
Deploying the BRM JCA Resource Adapter on an Oracle application server
The adapter is dependent on Java Archive (JAR) files to deploy properly. The following table lists the JAR files that the adapter requires from each application in your system.
Application
JAR files
J2EE application server
classes12.jar, connector15.jar, and jta.jar
Oracle BPEL process
bpm-infra.jar, orabpel-thirdparty.jar, orabpel.jar, and xmlparserv2.jar
BRM J2EE Resource Adapter
pcm.jar and pcmext.jar
Apache
xercesImpl.jar
If you are deploying the adapter in a standalone Oracle Containers for Java EE (OC4J) instance, make sure these JAR files are available to the class loader that is loading the adapter.
If you are deploying the adapter by using Oracle SOA Suite, these JAR files are available as part of the oracle.bpel.common code source. You import these libraries as follows:
Open the Oracle_home/j2ee/Instance/config/applications.xml configuration file for the J2EE instance.
Add the oracle.bpel.common entry (shown in bold below) to the imported-shared-libraries section of the file:
<imported-shared-libraries>
<import-shared-library name="adf.oracle.domain"/>
<import-shared-library name="oracle.bpel.common"/>
</imported-shared-libraries>
Save and close the file.
Restart the application server or the J2EE instance.
After you make the JAR files available, deploy the adapter on the Oracle application server by using either the Oracle Application Server (Oracle AS) Application Server Control (ASC) or the Oracle admintool.jar file. Copy the adapter archive file (BRM_home/apps/brm_integrations/jca_adapter/OracleBRMJCA15Adapter.rar) from the installation directory to a location that is accessible to the adapter deployment tool. You can then open and deploy the archive file on your application server.
After successful deployment, return the applications.xml file to its original settings and add the oracle.bpel.common codesource to the BRM Adapter oc4j-ra.xml file:
Open the Oracle_home/j2ee/Instance/config/applications.xml configuration file for the J2EE instance.
Remove the following oracle.bpel.common entry (shown in bold below):
<imported-shared-libraries>
<import-shared-library name="adf.oracle.domain"/>
<import-shared-library name="oracle.bpel.common"/>
</imported-shared-libraries>
Save and close the file.
Open the JCA Resource Adapter oc4j-ra.xml file from the Oracle_home/j2ee/Instance/application-deployments/default/BRMAdapterDeploymentName directory.
Add the oracle.bpel.common entry (shown in bold below) to the oc4j-connector-factories section of the file:
<oc4j-connector-factories...>
<imported-shared-libraries>
<import-shared-library name="oracle.bpel.common"/>
</imported-shared-libraries>
<oc4j-connector-factories>
Save and close the file.
Restart the application server or the J2EE instance.
For more information about deploying the adapter, see your application server’s documentation.
Connecting the adapter to BRM in Oracle AS
You connect the adapter to the BRM software by creating connection pools and connection factories. As part of the adapter deployment, the application server creates oc4j-ra.xml from the packaged ra.xml. The ra.xml file is located in the Oracle_home/j2ee/Instance/connectors/AdapterDeploymentName/AdapterDeploymentName/META-INF directory. For example, Oracle_home/j2ee/home/connectors/BRMAdapter/BRMAdapter/META-INF/ra.xml.
Use the resource adapter home page from the Oracle AS ASC page to create connection pools and connection factories.
Create your connection pool by following the performance and tuning guidelines in Configuring Connection Pooling in OC4J in Oracle Containers for J2EE Resource Adapter Administrator's Guide. See download.oracle.com/docs/cd/B31017_01/web.1013/b28956/conncont.htm.
Make sure you set the pool’s Maximum Connections parameter (maxConnections XML entity) equal to or greater than the Oracle BPEL process manager’s dspMaxThreads parameter. For more information, see Oracle BPEL Process Manager Performance Tuning in Oracle Application Server Performance Guide for 10g Release 3 (10.1.3.1.0) at download.oracle.com/docs/cd/B31017_01/core.1013/b28942/tuning_bpel.htm.
Note To set up JCA Resource Adapter transaction management in BPEL, you must create a private connection pool and set its Inactive Connection Timeout property (inactivity-timeout XML entity) to 0. See About JCA Resource Adapter transaction management in BPEL for more information.
Create as many connection factories as your system needs. For each connection factory, specify the following:
The JNDI location for the connection factory.
The connection pool to use.
How to connect to BRM by using these entries:
Entry
Description
ConnectionString
Specify the protocol, host name, and port number for connecting to the BRM software. For example: ip Server1 12006.
DBNumber
Specify the database number for the BRM database. For example, enter 1 or 0.0.0.1 for database 0.0.0.1.
InputValidation
Specifies whether to validate the input XMLRecord:
True — The adapter validates the input XMLRecord against the opcode schema.
False — The adapter does not validate the input XMLRecord.
The default is False.
This overrides any other validation parameter specified in the WSDL file.
OutputValidation
Specifies whether to validate the output XMLRecord:
True — The adapter validates the output XMLRecord against the opcode schema.
False — The adapter does not validate the output XMLRecord.
The default is False.
This overrides any other validation parameter specified in the WSDL file.
LoginType
Specifies the authentication method:
1 — The adapter logs in to BRM by using the specified login name and password.
0 — The adapter logs in to BRM by using the specified service type and POID ID.
The default is 1.
UserName
Specifies the login name the adapter uses for logging in to the BRM software.
Note This entry is required only if LoginType is set to 1.
Password
Specify the password the adapter uses for logging in to the BRM software.
Note This entry is required only if LoginType is set to 1.
PoidID
Specifies the POID ID. This entry should be set to 1.
ServiceType
Specifies the service the adapter uses to log in to the BRM software.
The default is /service/pcm_client.
You have successfully configured the adapter to connect to BRM.

I need Fusion help creating a demo of BRM JCA Resource Adapter.
I know BRM well but am clueless with Fusion.
I am trying to figure out what Fusion products to download and install and how I manipulate the Fusion side to manipulate BRM.
My BRM docs say:
Installing the BRM JCA Resource Adapter ->
Software requirements
(yada yada install a bunch of BRM stuff I know how to do)
The adapter must be deployed on a J2EE 1.4-compliant application server that has implemented the JCA 1.5 specification. The adapter runs only in a managed environment. (Does this imply some particular Fusion package?)
(more yada yada about installing more BRM packages I know how to do)
Deploying and configuring the BRM JCA Resource Adapter ->
Overview of the BRM JCA Resource Adapter configuration procedure
The procedure for setting up the BRM JCA Resource Adapter includes the following tasks:
Installing the adapter on your BRM system, if you have not already done so. See Installing the BRM JCA Resource Adapter.
Generating the schema files for the adapter. See Generating the schema files for your system. (links to some BRM commands np)
Specifying how to construct XML tags. See Specifying the XML tags for extended fields. (links to an oob file included with directions on how to address BRM customizations np)
Generating the WSDL files for the adapter. See Generating the WSDL files for your system. (links to an oob file with directions to configure. I could use some help if/when I get this far)
The last two look pretty important but I haven't a clue. I pasted the text from the docs below.
Deploying the adapter on your application server. See Deploying the BRM JCA Resource Adapter on an Oracle application server.
Connecting the adapter to the BRM software. See Connecting the adapter to BRM in Oracle AS.
Deploying the BRM JCA Resource Adapter on an Oracle application server
The adapter is dependent on Java Archive (JAR) files to deploy properly. The following table lists the JAR files that the adapter requires from each application in your system.
Application
JAR files
J2EE application server
classes12.jar, connector15.jar, and jta.jar
Oracle BPEL process
bpm-infra.jar, orabpel-thirdparty.jar, orabpel.jar, and xmlparserv2.jar
BRM J2EE Resource Adapter
pcm.jar and pcmext.jar
Apache
xercesImpl.jar
If you are deploying the adapter in a standalone Oracle Containers for Java EE (OC4J) instance, make sure these JAR files are available to the class loader that is loading the adapter.
If you are deploying the adapter by using Oracle SOA Suite, these JAR files are available as part of the oracle.bpel.common code source. You import these libraries as follows:
Open the Oracle_home/j2ee/Instance/config/applications.xml configuration file for the J2EE instance.
Add the oracle.bpel.common entry (shown in bold below) to the imported-shared-libraries section of the file:
<imported-shared-libraries>
<import-shared-library name="adf.oracle.domain"/>
<import-shared-library name="oracle.bpel.common"/>
</imported-shared-libraries>
Save and close the file.
Restart the application server or the J2EE instance.
After you make the JAR files available, deploy the adapter on the Oracle application server by using either the Oracle Application Server (Oracle AS) Application Server Control (ASC) or the Oracle admintool.jar file. Copy the adapter archive file (BRM_home/apps/brm_integrations/jca_adapter/OracleBRMJCA15Adapter.rar) from the installation directory to a location that is accessible to the adapter deployment tool. You can then open and deploy the archive file on your application server.
After successful deployment, return the applications.xml file to its original settings and add the oracle.bpel.common codesource to the BRM Adapter oc4j-ra.xml file:
Open the Oracle_home/j2ee/Instance/config/applications.xml configuration file for the J2EE instance.
Remove the following oracle.bpel.common entry (shown in bold below):
<imported-shared-libraries>
<import-shared-library name="adf.oracle.domain"/>
<import-shared-library name="oracle.bpel.common"/>
</imported-shared-libraries>
Save and close the file.
Open the JCA Resource Adapter oc4j-ra.xml file from the Oracle_home/j2ee/Instance/application-deployments/default/BRMAdapterDeploymentName directory.
Add the oracle.bpel.common entry (shown in bold below) to the oc4j-connector-factories section of the file:
<oc4j-connector-factories...>
<imported-shared-libraries>
<import-shared-library name="oracle.bpel.common"/>
</imported-shared-libraries>
<oc4j-connector-factories>
Save and close the file.
Restart the application server or the J2EE instance.
For more information about deploying the adapter, see your application server’s documentation.
Connecting the adapter to BRM in Oracle AS
You connect the adapter to the BRM software by creating connection pools and connection factories. As part of the adapter deployment, the application server creates oc4j-ra.xml from the packaged ra.xml. The ra.xml file is located in the Oracle_home/j2ee/Instance/connectors/AdapterDeploymentName/AdapterDeploymentName/META-INF directory. For example, Oracle_home/j2ee/home/connectors/BRMAdapter/BRMAdapter/META-INF/ra.xml.
Use the resource adapter home page from the Oracle AS ASC page to create connection pools and connection factories.
Create your connection pool by following the performance and tuning guidelines in Configuring Connection Pooling in OC4J in Oracle Containers for J2EE Resource Adapter Administrator's Guide. See download.oracle.com/docs/cd/B31017_01/web.1013/b28956/conncont.htm.
Make sure you set the pool’s Maximum Connections parameter (maxConnections XML entity) equal to or greater than the Oracle BPEL process manager’s dspMaxThreads parameter. For more information, see Oracle BPEL Process Manager Performance Tuning in Oracle Application Server Performance Guide for 10g Release 3 (10.1.3.1.0) at download.oracle.com/docs/cd/B31017_01/core.1013/b28942/tuning_bpel.htm.
Note To set up JCA Resource Adapter transaction management in BPEL, you must create a private connection pool and set its Inactive Connection Timeout property (inactivity-timeout XML entity) to 0. See About JCA Resource Adapter transaction management in BPEL for more information.
Create as many connection factories as your system needs. For each connection factory, specify the following:
The JNDI location for the connection factory.
The connection pool to use.
How to connect to BRM by using these entries:
Entry
Description
ConnectionString
Specify the protocol, host name, and port number for connecting to the BRM software. For example: ip Server1 12006.
DBNumber
Specify the database number for the BRM database. For example, enter 1 or 0.0.0.1 for database 0.0.0.1.
InputValidation
Specifies whether to validate the input XMLRecord:
True — The adapter validates the input XMLRecord against the opcode schema.
False — The adapter does not validate the input XMLRecord.
The default is False.
This overrides any other validation parameter specified in the WSDL file.
OutputValidation
Specifies whether to validate the output XMLRecord:
True — The adapter validates the output XMLRecord against the opcode schema.
False — The adapter does not validate the output XMLRecord.
The default is False.
This overrides any other validation parameter specified in the WSDL file.
LoginType
Specifies the authentication method:
1 — The adapter logs in to BRM by using the specified login name and password.
0 — The adapter logs in to BRM by using the specified service type and POID ID.
The default is 1.
UserName
Specifies the login name the adapter uses for logging in to the BRM software.
Note This entry is required only if LoginType is set to 1.
Password
Specify the password the adapter uses for logging in to the BRM software.
Note This entry is required only if LoginType is set to 1.
PoidID
Specifies the POID ID. This entry should be set to 1.
ServiceType
Specifies the service the adapter uses to log in to the BRM software.
The default is /service/pcm_client.
You have successfully configured the adapter to connect to BRM.

BPEL & Resource adapter deployment in 10.1.2

Hi,
I have deployed a JCA resource adapter in a 10.1.2 server and it seems that it doesn't get deployed right or, at least, when I test it with a BPEL process, doesn’t work.
I have tested the adapter and the BPEL process in 10.1.3 and works fine, but it doesn't work in 10.1.2. I need to work in 10.1.2 because I'm using the B2B integration suite and this is only available in 10.1.2.
This is what I have done to deploy the adapter:
i. I created the file oc4j-ra.xml in C:\OraHome_1OAS\j2ee\OC4J_BPEL\application-deployments\default\EbMS Adapter
ii. I copied the adapter rar file in C:\OraHome_1OAS\j2ee\OC4J_BPEL\connectors\EbMS Adapter
iii. I update C:\OraHome_1OAS\j2ee\OC4J_BPEL\config\oc4j-connectors.xml
Then, when I try to deploy a BPEL process to test the adapter, I get this error in the log (C:\OraHome_1OAS\integration\orabpel\domains\default\logs\domain.log):
<2007-06-20 09:18:31,984> <DEBUG> <default.collaxa.cube.activation> <AdapterFramework::Inbound> Looking up Resource Adapter JNDI location 'eis/ebmsra'
<2007-06-20 09:18:31,984> <WARN> <default.collaxa.cube.activation> <AdapterFramework::Inbound> JNDI lookup of 'eis/ebmsra' failed due to: eis/ebmsra not found
<2007-06-20 09:18:31,984> <DEBUG> <default.collaxa.cube.activation> <AdapterFramework::Inbound> Looking up Resource Adapter JNDI location 'eis/ebmsra'
<2007-06-20 09:18:31,984> <WARN> <default.collaxa.cube.activation> <AdapterFramework::Inbound> JNDI lookup of 'eis/ebmsra' failed due to: eis/ebmsra not found
<2007-06-20 09:18:32,078> <DEBUG> <default.collaxa.cube.engine.deployment> <DeploymentHelper::deployProcess> failed because
java.lang.Exception: Problem 1: [EBMSOutgoing.wsdl]: Unable to locate the JCA Resource Adapter via WSDL port element jca:address.
The Adapter Framework is unable to startup the Resource Adapter specified in the WSDL jca:address element: {http://xmlns.oracle.com/pcbpel/wsdl/jca/}address: location='eis/ebmsra'
The reason for this is most likely that either
1) the Resource Adapters RAR file has not been deployed successfully to the OC4J Application server or
2) the 'location' attribute in $J2EE_HOME/application-deployments/default/deployed-adapter-name/oc4j-ra.xml has not been set to eis/ebmsra. In the last case you might have to add a new 'connector-factory' entry (connection) to oc4j-ra.xml.
Please correct this and then restart the BPEL/OC4J Application Server
     at oracle.tip.adapter.fw.validation.WSDLDeploymentValidation.performDeploymentWsdlValidation(WSDLDeploymentValidation.java:144)
     at com.collaxa.cube.engine.deployment.DeploymentHelper.performPreDeploymentActions(DeploymentHelper.java:578)
     at com.collaxa.cube.engine.deployment.DeploymentHelper.deployProcess(DeploymentHelper.java:350)
     at com.collaxa.cube.ejb.impl.BPELDomainManagerBean.deployProcess(BPELDomainManagerBean.java:412)
     at IBPELDomainManagerBean_StatelessSessionBeanWrapper34.deployProcess(IBPELDomainManagerBean_StatelessSessionBeanWrapper34.java:2300)
     at com.oracle.bpel.client.BPELDomainHandle.deployProcess(BPELDomainHandle.java:303)
     at deployProcess.jspService(_deployProcess.java:136)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:350)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
     at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:222)
     at com.collaxa.cube.fe.DomainFilter.doFilter(DomainFilter.java:152)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:663)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:534)
<2007-06-20 09:18:32,078> <ERROR> <default.collaxa.cube> <BaseCubeSessionBean::logError> Error while invoking bean "domain manager": Error deploying BPEL archive.
An error occurred while attempting to deploy the BPEL archive file "bpel_EBMSOutgoingSample_v2007_06_19__39432.jar"; the exception reported is: Problem 1: [EBMSOutgoing.wsdl]: Unable to locate the JCA Resource Adapter via WSDL port element jca:address.
The Adapter Framework is unable to startup the Resource Adapter specified in the WSDL jca:address element: {http://xmlns.oracle.com/pcbpel/wsdl/jca/}address: location='eis/ebmsra'
The reason for this is most likely that either
1) the Resource Adapters RAR file has not been deployed successfully to the OC4J Application server or
2) the 'location' attribute in $J2EE_HOME/application-deployments/default/deployed-adapter-name/oc4j-ra.xml has not been set to eis/ebmsra. In the last case you might have to add a new 'connector-factory' entry (connection) to oc4j-ra.xml.
Please correct this and then restart the BPEL/OC4J Application Server
ORABPEL-05207
Error deploying BPEL archive.
An error occurred while attempting to deploy the BPEL archive file "bpel_EBMSOutgoingSample_v2007_06_19__39432.jar"; the exception reported is: Problem 1: [EBMSOutgoing.wsdl]: Unable to locate the JCA Resource Adapter via WSDL port element jca:address.
The Adapter Framework is unable to startup the Resource Adapter specified in the WSDL jca:address element: {http://xmlns.oracle.com/pcbpel/wsdl/jca/}address: location='eis/ebmsra'
The reason for this is most likely that either
1) the Resource Adapters RAR file has not been deployed successfully to the OC4J Application server or
2) the 'location' attribute in $J2EE_HOME/application-deployments/default/deployed-adapter-name/oc4j-ra.xml has not been set to eis/ebmsra. In the last case you might have to add a new 'connector-factory' entry (connection) to oc4j-ra.xml.
Please correct this and then restart the BPEL/OC4J Application Server
     at com.collaxa.cube.engine.deployment.DeploymentHelper.deployProcess(DeploymentHelper.java:363)
     at com.collaxa.cube.ejb.impl.BPELDomainManagerBean.deployProcess(BPELDomainManagerBean.java:412)
     at IBPELDomainManagerBean_StatelessSessionBeanWrapper34.deployProcess(IBPELDomainManagerBean_StatelessSessionBeanWrapper34.java:2300)
     at com.oracle.bpel.client.BPELDomainHandle.deployProcess(BPELDomainHandle.java:303)
     at deployProcess.jspService(_deployProcess.java:136)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:350)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
     at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:222)
     at com.collaxa.cube.fe.DomainFilter.doFilter(DomainFilter.java:152)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:663)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:534)
<2007-06-20 09:19:18,515> <DEBUG> <default.collaxa.cube.engine.dispatch> <Dispatcher::insert> Received no-op message
<2007-06-20 09:19:18,515> <DEBUG> <default.collaxa.cube.engine.dispatch> <Dispatcher::adjustThreadPool> Allocating 1 thread(s); pending threads: 1, active threads: 0, total: 5
<2007-06-20 09:19:18,515> <DEBUG> <default.collaxa.cube.engine.dispatch> <QueueConnectionPool::getConnection> Fetched a queue connection from pool java:comp/env/jms/collaxa/BPELWorkerQueueFactory, available connections=24, total connections=25
<2007-06-20 09:19:18,515> <DEBUG> <default.collaxa.cube.engine.dispatch> <DispatcherBean::send> Sent message to queue
<2007-06-20 09:19:18,515> <DEBUG> <default.collaxa.cube.engine.dispatch> <QueueConnectionPool::releaseConnection> Released queue connection to pool java:comp/env/jms/collaxa/BPELWorkerQueueFactory, available connections=25, total connections=25
As I see that I have deployed the connector in C:\OraHome_1OAS\j2ee\OC4J_BPEL, but the BPEL process is been deployed in C:\OraHome_1OAS\integration\orabpel, I try to deploy the connector in C:\OraHome_1OAS\integration\orabpel\system\appserver\oc4j\j2ee\home. I copied the "connectors" and "application-deployments" directories into C:\OraHome_1OAS\integration\orabpel\system\appserver\oc4j\j2ee\home (because didn't exist) and updated the C:\OraHome_1OAS\integration\orabpel\system\appserver\oc4j\j2ee\home\config\oc4j-connectors.xml, but I still get the same error.
Anybody can help me?
Thanks,
Miguel

Hi miquel,
I'm working in 10.1.3.1 environmen and wanna develop a custom JCA adapter. Can you show me some hits/reference for JCA adapter in 10.1.3.1?
Steven

BINDING.JCA-12510 JCA Resource Adapter location error in SOA 11g Suite

Hi,
I am just testing one simple SOA Application in SOA 11g Suite. Created a SOA Composite Application with one DB Adapter at designtime all worked fine with DB Adapter. But when I deploy the Application on the server I get the following error:
The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/soademoDatabase'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/soademoDatabase. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ".Do I need to jndi-name in weblogic-ra.xml if so what is the exact location. Any help is appreciated.
Thanks

I did but still not able to connect now getting the following error. I went to the Weblogic Console, clicked on deployments, selected DBAdapter, clicked on configuration ,
and then I don't see outbound configurations instead it shows Outbound Connection Pools, Under Outbound Connection Pools tab I clicked on New and it asked to select Outbound Connection Group I selected the one that was already there (with JNDI eis/DB/SOADemo) and then created my JNDI which was added to the default Outbound Connection Group and in the end it asked to save the Plan.xml which I saved it under a new directory created under soa directory. But still am not able to connect.
How do I create my own Connection Group as don't want to use the defualt one out there.
After creating the JNDI Name it asks for saving the Plan.xml file. Where exactly we save this file. Are there any standards.
Why can't I update any properties when I click on the new JNDI name it takes to Settings for javax.resource.cci.ConnectionFactory --> Outbound Connection Properties but there I see a save buttn but I can't make any changes.
BINDING.JCA-12563 Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'getCreditValidationSelect' failed due to: Could not create/access the TopLink Session. This session is used to connect to the datastore. Caused by javax.resource.spi.InvalidPropertyException: Missing Property Exception. Missing Property: [DBManagedConnectionFactory.userName]. You may have set a property (in _db.jca) which requires another property to be set also. Make sure the property is set in the interaction (activation) spec by editing its definition in _db.jca. . ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. Is there any documentation that lists all these steps as I couldn't find it anywhere. The guide only talks abou DBAdapter but how to configure etc can't find any info. Any help is appreciated.
Thanks.

Resource Adapter deployment on cluster

Hi,
I have a weblogic cluster with 2 nodes and a load balancer. Recently I have deployed a database adapter to connect to a sql server database which is used by a service (OSB proxy service). The deployed was performed with both nodes running and I connected to the admin console using the LB IP. The deployed was done with successful and I have restarted both nodes. The cluster is configured with a stage mode in order to copy files from admin server.
When I call this service, it goes ok when node1 is used but not ok when node2 is used. It gives an JCA error accessing the sql server database. To solve this issue I had to copy the deployment plan file from node1 to node2 and reploy de dbadapter resource with node1 down in order to update the node2. I was expecting that these files were updated on both nodes whenever I deploy a resource adapter on admin console.
What am I doing wrong? Or what config should I check/update on admin console in order to avoid this manual task?
Thanks,
Regards,
António Amado

Use the shared location for deployment plans.
Please see the link : Managing the Topology for an Enterprise Deployment - 11g Release 1 (11.1.1)

Resource Adapter Deployment Error (Resolved)

This Problem Has Been Resolved.
I'm trying to develop an application using Inbound resource adapters on Weblogic 9.2.1 .
I have the resource adapter and the MDB packaged separately. The MDB appears to deploy successfully, but the resource adapter does not.
I get the following exception
javax.naming.NamingException [Root exception is java.rmi.RemoteException: javax.naming.InitialContext; nested exception is:
     java.io.NotSerializableException: javax.naming.InitialContext]
     at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:97)
     at weblogic.jndi.internal.WLContextImpl.translateException(WLContextImpl.java:421)
     at weblogic.jndi.internal.WLEventContextImpl.bind(WLEventContextImpl.java:297)
     at weblogic.jndi.internal.WLContextImpl.bind(WLContextImpl.java:389)
     at weblogic.connector.deploy.JNDIHandler.bindRA(JNDIHandler.java:575)
     at weblogic.connector.common.RAInstanceManager.putRAintoJNDITree(RAInstanceManager.java:1361)
     at weblogic.connector.common.RAInstanceManager.activate(RAInstanceManager.java:432)
     A similar issues was referenced in this message :
     http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4330872
     It appears that the exception means the InitialContext is not serializable.
     This is my start(BootstrapContext) method in my resource adapter. If I DO NOT call new InitialContext(), or setMDBOnMessageMethod(), the exception does not occur.
public void start(BootstrapContext ctx)
     this.ctx = ctx;
     System.out.println("entering AddScanResourceAdapterImpl start");
     logger.info("entering AddScanResourceAdapterImpl start");
     try
     this.JNDIContext = new InitialContext(); // This causes the exception.
     this.wm = this.ctx.getWorkManager(); // Calling this does not cause and exception.
     setMDBOnMessageMethod(); // This also appears to cause the same exception.
     catch (Exception e)
          System.out.println("AddScanRA start : Exception thrown: " + e);
     // TODO: Log problem.
     logger.info("exiting AddScanResourceAdapterImpl start");
private void setMDBOnMessageMethod()
try
Class socketListenerClass = com.fedex.ground.tms.mtms.server.addscan.connector.ra.AddScanSocketHandler.class;
Class[] paramTypes      = { java.net.Socket.class };
this.onMessageMethod      = socketListenerClass.getMethod("onMessage", paramTypes);
catch (NoSuchMethodException ex)
ex.printStackTrace();
Thanks for your any help,
John
Edited by johnbrod20 at 04/17/2007 6:48 AM

Hi John,
One of my customer is facing the same error .
Can you please share the resolution of this problem

WebLogic Server 10.0 MP1: Error in resource adapter deployment

When I try to deploy our (own implemented) resource adapter into WebLogic Server 10.0 MP1, I get the following error message:
An error occurred during activation of changes, please see the log for details.
weblogic.security.service.InvalidParameterException: weblogic.security.service.SecurityServiceException: [Security:090198]No appropriate constructor for java.util.logging.LoggingPermission
java.util.logging.LoggingPermission.(java.lang.String)
The same adapter works flawless with Oracle AS/OC4J, JBoss 4.2 and Glassfish V2.
In the security-permission-spec element of our ra.xml file we use (beside others) the following permissions:
permission javax.management.MBeanTrustPermission "register";
permission java.util.logging.LoggingPermission "control";
When I delete this two lines from the security-permission-spec element, I can deploy the adapter in WebLogic.
For me this seems to be a bug in WebLogic 10.0MP1.
Best,
Manfred

Re: Installation error: Weblogic Server 10.0 MP2

JCA Resource Adapter CCI

Has anyone found a reference application that properly uses the JCA CCI specification? I would like to test a Resource Adapter against the standard rather than against my understanding of the standard.

try:
http://www.fawcette.com/javapro/2002_02/magazine/features/tmodi/

JCA - Resource adapter information in ManagedConnectionFactory

Hi,
I am developing a Outbound Resource Adapter. Is there any way to get the Resource Adapter Object associated in ManagedConnectionFactory Implementation? Or is there a means by which we can pass on the configuration
data (Like user name, password) to ManagedConnectionFactory at start up of Resource Adapter. This is particularly
needed when we configure some initial no of connections in a connection pool at start up.
Thanks for any information.
Abhijit

Hi Abhijit,
as the api shows a connection can be established by passing an instance of javax.resource.cci.ConnectionSpec. The interface itself provides no method, so you have to specify them on your own like setUserName(String name) and setPassword(String pw).
Client code should look like:
ConnectionFactory cf = ...; // jndi lookup
ConnectionSpecImpl connSpec = new ConnectionSpecImpl();
connSpec.setUserName("myName");
connSpec.setPassword("myPassword");
Connection conn = cf.getConnection(connSpec);
Internally the connSpec instance should be passed by the factory to the pooling instance.

BINDING.JCA-12510 JCA Resource Adapter - Cannot call rollback when using di

Hi,
i'm facing a simillar issue with dbadapter while trying to insert a record.
The issue that I'm facing is: (BINDING.JCA-12563)
Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'insert' failed due to: DBWriteInteractionSpec Execute Failed Exception. insert failed. Descriptor name: http://InsertEmployee.TestEmp. Caused by java.sql.SQLException: Cannot call rollback when using distributed transactions. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
I faced the same issues that have been posted in this thread before but this is a new one I'm seeing.
Following are the configurations that I'm using.
WEBLOGIC ADMIN CONSOLE
JDBC datasources
General tab:
JNDI Name: jdbc/SOADataSource
Connection Pool tab:
URL - jdbc:oracle:thin:@localhost:1522/XE
Driver Class Name - oracle.jdbc.xa.client.OracleXADataSource
Properties - user=SATRA_SOAINFRA
oracle.net.CONNECT_TIMEOUT=10000
Deployments
Inside DbAdapter - Configuration
The general tab shows blank values for 'Native lib dir' and 'JNDI name' fields. Is this normal or I need to populate values into these.
Inside Outbound Connection Pools the javax.resource.cci.ConnectionFactory created an entry 'eis/DB/10gXE_DBCon'
following is the settings for dataSourceName property
dataSourceName java.lang.String jdbc/SOADataSource
I have kept the value for xADataSourceName as blank as giving the same value of 'jdbc/SOADataSource' throws error.
The JNDI value that I'm using while creating the database adapter from Jdev is eis/DB/10gXE_DBCon where 10gXE_DBCon is the database connection name.
Can you please tell me what is the issue and where I'm going wrong.
Thanks in advance,
Satrajit

Hi Sunil,
I followed your advice and did the changes, that error has gone but a new error is popping up.
BINDING.JCA-12563 Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'insert' failed due to: DBWriteInteractionSpec Execute Failed Exception. insert failed. Descriptor name: [InsertEmployee.TestEmp]. Caused by java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist . ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
The name of the table i'm inserting to is test_emp and it exists in the database.
the .jca file for dbadsapter is like
<adapter-config name="FileToDB_DBAdp" adapter="Database Adapter" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/DB/10gXE_DBCon" UIConnectionName="10gXE_DBCon" adapterRef=""/>
<endpoint-interaction portType="FileToDB_DBAdp_ptt" operation="insert">
<interaction-spec className="oracle.tip.adapter.db.DBWriteInteractionSpec">
<property name="DescriptorName" value="FileToDB_DBAdp.TestEmp"/>
<property name="DmlType" value="insert"/>
<property name="MappingsMetaDataURL" value="FileToDB_DBAdp-or-mappings.xml"/>
<property name="DetectOmissions" value="true"/>
<property name="GetActiveUnitOfWork" value="false"/>
</interaction-spec>
</endpoint-interaction>
</adapter-config>
and the .xsd file for dbadapter is
<?xml version = '1.0' encoding = 'UTF-8'?>
<xs:schema targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/top/FileToDB_DBAdp" xmlns="http://xmlns.oracle.com/pcbpel/adapter/db/top/FileToDB_DBAdp" elementFormDefault="qualified" attributeFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:element name="TestEmpCollection" type="TestEmpCollection"/>
<xs:complexType name="TestEmpCollection">
<xs:sequence>
<xs:element name="TestEmp" type="TestEmp" minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="TestEmp">
<xs:sequence>
<xs:element name="empid" type="xs:decimal" nillable="true"/>
<xs:element name="name" type="xs:string" minOccurs="0" nillable="true"/>
<xs:element name="designation" minOccurs="0" nillable="true">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="50"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="salary" type="xs:decimal" minOccurs="0" nillable="true"/>
<xs:element name="deptno" type="xs:decimal" minOccurs="0" nillable="true"/>
</xs:sequence>
</xs:complexType>
</xs:schema>
If I change element name from 'TestEmp' to 'Test_Emp' in the .xsd file,
I'm getting the following issue ...
Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'insert' failed due to: Could not create/access the TopLink Session. This session is used to connect to the datastore. Caused by java.lang.NullPointerException. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
I'm confused why does it take the table name as TestEmp and not as Test_Emp.
Regards,
Satrajit

JCA resource adapter

Hi,
I haven't been able to access enterprise-connector group so I'll post my
question here.
Does iPlanet support JCA and can we use resource adapters to connect to SAP
as stated on http://java.sun.com/j2ee/connector/products.html ? If we can
which version of iPlanet is required ?
Does anybody have suggestions, ideas regarding implementation ?
Thank you,
Dragan Zutic
EDS - Telecom New Zealand

Are you working on a decentral AE? Does the channel point to the correct AE? Does the cache refresh work?
What do you means, with having no effect: Is the channel not visible to the adapter or does it work with previous values?
Stefan

ADF BC not working in a JCA Resource Adapter. Setting classpaths?Libraries?

Hi,
I have a JCA connector which is supposed to use Businiess Components for accessing the EIS. When I try to bootstrap Application Module through some of Configuration.createRootApplicationModule I'm getting StackOverflow:
06/12/19 15:17:54 WARNING: DeployerRunnable.run java.lang.StackOverflowErrororacle.oc4j.admin.internal.DeployerException: java.lang.StackOverflowError
     at oracle.oc4j.admin.internal.DeployerBase.execute(DeployerBase.java:139)
     at oracle.oc4j.admin.jmx.server.mbeans.deploy.OC4JDeployerRunnable.doRun(OC4JDeployerRunnable.java:52)
     at oracle.oc4j.admin.jmx.server.mbeans.deploy.DeployerRunnable.run(DeployerRunnable.java:81)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.StackOverflowError
     at java.lang.ClassLoader.findBootstrapClass(Native Method)
     at java.lang.ClassLoader.findBootstrapClass0(ClassLoader.java:891)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:301)
     at oracle.classloader.PolicyClassLoader.findJREClass(PolicyClassLoader.java:1153)
     at oracle.classloader.JVMSearchPolicy.getClass(JVMSearchPolicy.java:27)
     at oracle.classloader.SearchPolicy.loadClass(SearchPolicy.java:645)
     at oracle.classloader.PolicyClassLoader.askParentForClass(PolicyClassLoader.java:1289)
     at oracle.classloader.SearchPolicy$AskParent.getClass(SearchPolicy.java:68)
     at oracle.classloader.SearchSequence.getClass(SearchSequence.java:119)
     at oracle.classloader.SearchPolicy.loadClass(SearchPolicy.java:645)
     at oracle.classloader.PolicyClassLoader.askParentForClass(PolicyClassLoader.java:1289)
     at oracle.classloader.SearchPolicy$AskParent.getClass(SearchPolicy.java:68)
     at oracle.classloader.SearchSequence.getClass(SearchSequence.java:119)
     at oracle.classloader.SearchPolicy.loadClass(SearchPolicy.java:645)
     at oracle.classloader.PolicyClassLoader.askParentForClass(PolicyClassLoader.java:1289)
     at oracle.classloader.SearchPolicy$AskParent.getClass(SearchPolicy.java:68)
     at oracle.classloader.SearchSequence.getClass(SearchSequence.java:119)
     at oracle.classloader.SearchPolicy.loadClass(SearchPolicy.java:645)
     at oracle.classloader.PolicyClassLoader.askParentForClass(PolicyClassLoader.java:1289)
     at oracle.classloader.SearchPolicy$AskParent.getClass(SearchPolicy.java:68)
     at oracle.classloader.SearchSequence.getClass(SearchSequence.java:119)
     at oracle.classloader.PolicyClassLoader.internalLoadClass(PolicyClassLoader.java:1674)
     at oracle.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1635)
     at oracle.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1620)
        ....I tried to isolate further the problem and found out that probably it is in the inablity of connector's ClassLoader to find the ADF BC classes. I tried to instantiate Application pool directly as it is done in PoolMgr.createPool using the following code:
         Class poolClass = JBOClass.forName(sClass);
         ApplicationPool pool = (ApplicationPool)poolClass.newInstance();This time the exception was:
06/12/19 15:11:04 oracle.classloader.util.AnnotatedClassNotFoundException:
       Missing class: oracle.jbo.common.ampool.ApplicationPoolImpl
     Dependent class: oracle.jbo.common.java2.JDK2ClassLoader
              Loader: adf.oracle.domain:10.1.3.1
         Code-Source: /C:/oracle/product/10.1.3.1/BC4J/lib/adfm.jar
       Configuration: <code-source> in /C:/oracle/product/10.1.3.1/j2ee/home/config/server.xml
This load was initiated at system.root:0.0.0 using the Class.forName() method.
The missing class is available from the following locations:
     1. Code-Source: /C:/oracle/product/10.1.3.1/BC4J/lib/bc4jct.jar (from <code-source> in /C:/oracle/product/10.1.3.1/j2ee/home/config/server.xml)
        This code-source is available in loader adf.oracle.domain:10.1.3.1. This shared-library can be imported by the "system" application.
        This code-source is available in loader adf.generic.domain:10.1.3.1. This shared-library can be imported by the "system" application.
     2. Code-Source: /C:/oracle/product/10.1.3.1/BC4J/lib/bc4jmt.jar (from <code-source> in /C:/oracle/product/10.1.3.1/j2ee/home/config/server.xml)
        This code-source is available in loader adf.oracle.domain:10.1.3.1. This shared-library can be imported by the "system" application.
        This code-source is available in loader adf.generic.domain:10.1.3.1. This shared-library can be imported by the "system" application.Are there any classpath or library variables accros Aplication Server configuration files which I can configure in order to solve the problem?
Thank you!
Simeon

repost

JCA 1.5 Resource Adapter integration

Hi,
I'm trying to create a custom JCA 1.5 Resource Adapter that has to be integrated with the BPEL PM. I already have the JCA Resource Adapter done,
and I want to integrate it with BPEL. I'm following the document http://www.oracle.com/technology/products/integration/adapters/pdf/Adapter%20Development%20cookbook.pdf, but I'm not able to make it work. Is there more documentation? any tutorial, example...
Thanks,
Miquel

Hi Manfred,
This is the error page that I'm getting. Seems an internal BPEL PM error. I can't make the Audit Trail because I'm getting an error page, not the result page.
Yes, I have the CCI ManagedConnectionFactory deployed as eis/imEIS
What do you mean with the records must be of type XMLRecord? This is what the XMLRecordConverter has to do, no?
To convert javax.resource.cci.Record <-> oracle.tip.adapter.api.record.XMLRecord
Thanks for your help,
Miquel
Oracle BPEL Process Manager Full Cycle
An unexpected error has occurred while executing your request. This is most likely related to a defect in the Oracle BPEL Process Manager product. We apologize you can post the error to the OTN forum and we will get back to you as soon as possible.
Attachments:
Build Information:
Oracle BPEL Server version 10.1.2.0.2
Build: 2196
Build time: Tue Jan 10 12:31:53 UTC 2006
Build type: release
Source tag: BPEL_10.1.2.0.2_GENERIC_060110.1200
Exception Message:
[javax.servlet.ServletException]
null
Exception Trace:
javax.servlet.ServletException
at com.evermind.server.http.EvermindPageContext.handlePageThrowable(EvermindPageContext.java:595)
at com.evermind.server.http.EvermindPageContext.handlePageException(EvermindPageContext.java:537)
at ngDoInitiate.jspService(_ngDoInitiate.java:438)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:350)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824)
at com.evermind.server.http.ServletRequestDispatcher.include(ServletRequestDispatcher.java:121)
at com.evermind.server.http.EvermindPageContext.include(EvermindPageContext.java:267)
at displayProcess.jspService(_displayProcess.java:792)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:350)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:222)
at com.collaxa.cube.fe.DomainFilter.doFilter(DomainFilter.java:152)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:663)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:534)
Also, before I submit the form I see this on the log:
<2006-12-12 14:51:14,750> <DEBUG> <default.collaxa.cube.engine.deployment> <CubeProcessHolder::loadAndBind> Check if process BPELIntegration, revision 1.0 needs to be reloaded
<2006-12-12 14:51:14,812> <DEBUG> <default.collaxa.cube.engine.data> <ConnectionFactory::getConnection> GOT CONNECTION 4 Autocommit = false
<2006-12-12 14:51:14,843> <DEBUG> <default.collaxa.cube.engine.data> <ConnectionFactory::closeConnection> CLOSE CONNECTION 3
<2006-12-12 14:51:14,875> <DEBUG> <default.collaxa.cube.engine.data> <ConnectionFactory::getConnection> GOT CONNECTION 4 Autocommit = false
<2006-12-12 14:51:14,921> <DEBUG> <default.collaxa.cube.engine.data> <ConnectionFactory::closeConnection> CLOSE CONNECTION 3
<2006-12-12 14:51:14,921> <ERROR> <default.collaxa.cube> <BaseCubeSessionBean::logError> Error while invoking bean "presentation manager":
java.lang.NullPointerException
at com.collaxa.cube.xml.xsd.WSDLUtil.getInputParameters(WSDLUtil.java:33)
at com.collaxa.cube.xml.xsd.xerces.WSDLFormHandler.writeForm(WSDLFormHandler.java:82)
at com.collaxa.cube.xml.xsd.xerces.WSDLFormHandler.write(WSDLFormHandler.java:76)
at com.collaxa.cube.ejb.impl.PresentationManagerBean.getInitiateFormContent(PresentationManagerBean.java:66)
at IPresentationManagerBean_StatelessSessionBeanWrapper62.getInitiateFormContent(IPresentationManagerBean_StatelessSessionBeanWrapper62.java:81)
at com.oracle.bpel.client.BPELProcessHandle.getInitiateFormContent(BPELProcessHandle.java:383)
at ngInitiateForm.jspService(_ngInitiateForm.java:243)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:350)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824)
at com.evermind.server.http.ServletRequestDispatcher.include(ServletRequestDispatcher.java:121)
at com.evermind.server.http.EvermindPageContext.include(EvermindPageContext.java:267)
at displayProcess.jspService(_displayProcess.java:806)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:350)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:222)
at com.collaxa.cube.fe.DomainFilter.doFilter(DomainFilter.java:152)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:663)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:534)

JCA Mail Adapter

Hi,
I have written a JCA adapter to sit in betweena mail server and an aplication. I have deployed the adapter succesfully with warnings though. The connection factory is having trouble being initialized. Here is the error log.
2007-03-26 20:25:57.125 NOTIFICATION Connector Module Deployer for Email-Driver
STARTS.
2007-03-26 20:25:57.140 NOTIFICATION Copy the archive to D:\jdev 10.1.3\j2ee\hom
e\connectors\Email-Driver\Email-Driver.rar
2007-03-26 20:25:57.140 NOTIFICATION Auto-unpacking D:\jdev 10.1.3\j2ee\home\con
nectors\Email-Driver\Email-Driver.rar...
2007-03-26 20:25:57.140 NOTIFICATION Unpacking Email-Driver.rar
2007-03-26 20:25:57.140 NOTIFICATION Unjar D:\jdev 10.1.3\j2ee\home\connectors\E
mail-Driver\Email-Driver.rar in D:\jdev 10.1.3\j2ee\home\connectors\Email-Driver
\Email-Driver
2007-03-26 20:25:57.890 NOTIFICATION Done unpacking Email-Driver.rar
2007-03-26 20:25:57.890 NOTIFICATION Finished auto-unpacking D:\jdev 10.1.3\j2ee
\home\connectors\Email-Driver\Email-Driver.rar
2007-03-26 20:25:57.984 NOTIFICATION Starting up resource adapter
07/03/26 20:26:03 Driver Exception
2007-03-26 20:26:03.000 WARNING J2EE JCAC0013 Error (oracle.apps.zcc.mct.common.
driver.DriverException) while setting up RA for MCF (oracle.apps.zcc.mct.email.d
river.EmailManagedConnectionFactory) for standalone resource adapter 'Email Driv
er'
2007-03-26 20:26:03.000 WARNING J2EE JCAD0001
2007-03-26 20:26:03.000 NOTIFICATION Warning. Unable to set up connection factor
y to location Email-Driver for a resource adapter deployed as stand-alone.
2007-03-26 20:26:03.015 NOTIFICATION Connector Module Deployer for Email-Driver
COMPLETES. Operation time: 5890 msecs
Any pointers?

Please, post Oracle internal questions on the internal mailing lists!!!
--olaf

JCA Resource Adapter Deployment in OAS 10.1.2

Similar Messages

Maybe you are looking for