JCO problem in SOAP to file scenario

Hey guys
i m doin a SOAP to file scenario and getting a JCO error in moni,the status of my queue in SMQ2 is SYSFAIL,when i check the TCP/IP connection in SM59 i find error in two places
AI_DIRECTORY_JCOSERVER and AI_RUNTIME_JCOSERVER .when i test connection for both of them i get the followin error "Error opening and RFC connection".
is this error dues to some server problem of something wrong in my scenario.?
the SOAP adapter in RWB is green.
i tried to unlock and delete the queue in SMQ2 but when i execute my scenario again,it gets SYSFAIL error.
thanx
ahmad

Hi,
If you restart the J2ee engine, it will work.
But The error may because of many reasons
-Might be because of lots of messages are to be processed simultaneously.
-Increasing the number of processes in VisualAdmin (VisualAdmin>JCO RFC Provider>AI_RUNTIME_<SID>) and see if that helps.
-This SAP Note may help u -709140.
Hope this helps,
Regards,
Moorthy

Similar Messages

Error in SOAP to file scenario

Hey guys
i m doing a SOAP to File scenario and getting the following error.
<SAP:Stack>"COMMUNICATION FAILURE" during JCo call. Error opening an RFC connection.</SAP:Stack>
any idea where should i look ?
thanx
ahmad

Hey
i m still getting a red flag in MONI,the error is
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">JCO_COMMUNICATION_FAILURE</SAP:Code>
<SAP:P1>Error opening an RFC connection.</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>"COMMUNICATION FAILURE" during JCo call. Error opening an RFC connection.</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
i checked my mapping by copyin payload from MONI,its working fine.
thanx
ahmad

File to Web service (SOAP) to File scenario with out BPM in PI 7.1

Hi All,
I have scenario File to Web service (SOAP) to File scenario with out BPM.i am getting the below error:
1) Error MP: unexpected exception caught com.sap.aii.af.service.cpa.impl.exception.CPAObjectKeyException: Value of key must not be null: ObjectId
2) Error ROB: error during processing: com.sap.aii.af.lib.mp.processor.ModuleProcessorException: Processing Error
PI server is 7.1 with SP:8
I have configured the scenario like this
1) 2 File channels - Sender & Receiver ,1 RFC channel - Receiver. We need to note that, the additional Module parameters need to be added only for sender File channel
2) Created Sender Agreement
3)Created Receiver Determination
4)Created Interface Determination
5)Created Receiver Agreement
Regards,
Ramesh

Hi,
Thanks for your reply!!
My Scenario is File to SOAP to File.
Configred modules in Sender channal below:
Prcessing sequence:
Number       Module Name                                        Module Key
1..........       AF_Modules/RequestResponseBean.......1
2..........       CallSapAdapter..........................................2
3..........       AF_Modules/ResponseOnewayBean.......3
Module Configuration:
Module Key                                       Parameter Name                                       ParameterValue
1                                                        passThrough                                            true
3                                                        receiverChannel                                       receiverChannel name
3                                                        receiverService                                        receiverService name
please tell any more confiration requered.
Regards,
Ramesh

Business systems for Soap to file scenario

Hi Experts,
I am working on a soap to file scenario.Which type of business systems shall i create i.e Third party,As ABAP,As Java etc.Please suggest.
Thanks
Veeru

Hi,
Normally Business systems are created in SLD when you are provided with relevant system details. A business service is used in case of the system being an abstract unit.
In your case, it is better to go for Business service because you generally don't have such details for third party system.
Just go through this link for more understanding...
Difference between Business System and Business Service
Regards,
Chandra

Doubt Regarding SOAP to File Scenario

Hi All,
I am trying to create a SOAP to File scenario .These are the following things I have done so far :
IR - 2 datatypes ( 1 for soap message and 1 for file message )
       2 message types for the corresponding messages
      2 Message interfaces, both are asynchronous
      1 message mapping
      1 interface mapping
ID- 2 business systems (1 to send soap, 1 to recieve file )
    2 communiccation channel (soap sender, file receiver )
soap sender adapter parameters - Interface Name - Message interface for soap message
                                                  interface namespace - scenario namespace
Then, i generated a wsdl file to expose the outbound message interface for soap message as a web service, url for message interface : http://host:port.XISOAPAdapter/MessageServlet?:service:channel.
After generating the wsdl file, i imported it in external definition
Could anyone plz. tell me, is this the right approach to creat this scenario ? how can I test this scenario?using altova spy ?

Hi,
The URL you have mentioned to genarate WSDL is not a valid one
http://host:port.XISOAPAdapter/MessageServlet?:service:channel.
Check the below valid URL
http://host:port/XISOAPAdapter/MessageServlet?channel=:service:channel.
You no need to import this to the Eexternal Definition as you already have DT,MT and MI, Any way this dosn't make any difference.
You can use SOAPGUI Tool to test:
->Create New Project -> provide WSDL you have genarated.
->Select Request and provide username and password and click the green button on top(Submit request to end URL).
Using altova spy:
Select SOAP Menu->Create New SOAP Request and provide your WSDL file and
SOAPMenu->Send Request To Server
Then you will get response..
Regards,
Prasanna

Testing of SOAP to FILE Scenario

Hi all
I have done with SOAP to FILE scenario.
--> while defining web service what we need to give in the URL????
--> How to test this SOAP to FILE scenario to see wheather it is working fine or not, what are the all options
Thanks
Dheeraj

Hi Dheeraj,
Definitely you can test it through the microsoft infopath tool.
steps to follow:
Executing wsdl File Using Microsoft Info Path
1.>Click on the design a from template
2.>Select the Web service icon and click ok
3.>Select the radio button u2018receive and submit datau2019 and click on next.
4.>Enter the path of the generated wsdl which u have saved and click next.
5.>Select the interface and click next
6.>Select the interface and click next.
7.>Double click on parameters.
8.>Double click on the parameter (which you want to send as request). Then click on the query field and click ok.
9.>Click next. And click Finish
10.>Now drag the query fields on the data fields to the left side. And click preview.
Please follow these steps I hope you will be able to test it.
Thanks and regards,
Nutan

Soap to File Scenario with BPM

Hi Guys
I have create my Soap to File Scenario using BPM to split the file on "Transformation step" into 7 files and it must save these files to my FTP Server, when testing on sxmb_moni I don't get any errors but when checking on the FTP server no files are created, and I understand that it should be showing all seven processing on the sxmb_moni, but that is not happening.
I have used the ForEach mode on my Block.
What could I be doing wrong.
Thanks!!
Yonela

go to runtime work bench to see communication channel, especailly the receiver channel.
To see what happened on it

FIle Content Conversion Problem in IDOC-XI-File Scenario

Dear All,
I am doing IDOC-XI-FILE scenario.
I am facing one problem related to File Content Coversion.My requirement was to generate a dynamic file like %store_code%_%current_date%_sitemaster.xml , I have completed the dynamic generation successfully .
Now there is slight change in the requirement ,we have to suppress the current_date node of the xml content . i have tried to suppress the current_date using these DATE.fieldFixedLengths 0 , Date.fixedLengthTooShortHandling Cut , But I am unable to suppress it Can some body provide me the details on this .
The output xml version generated by Reciever file adapter is as below :
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_SITE_MASTER xmlns:ns0="http://sample-xitest.com/sitemaster">
- <SITE_DATA>
<STORE_CODE>N002</STORE_CODE>
<TITLE_MEDI>Company</TITLE_MEDI>
<STORE_NAME>Mount Road</STORE_NAME>
<STREET>Chennai</STREET>
<COUNTRY>IN</COUNTRY>
<SALES_TAX_NO>12345678910</SALES_TAX_NO>
</SITE_DATA>
</ns0:MT_SITE_MASTER>
Plz provide me the code I have to write in the file content conversion .
Thanks in advance
Regards
Prabhat

If u see my earlier reply, I mentioned that u can not suppress the field from the one node.i.e Form SITE_DATA data type u can not suppress the field called CURRENT_DATE.
My suggestion is that , modify the Data type in such a way that you will be having two nodes as I have mentioned earlier. Then use the Suppress Logic for the Current Date.
So it will look like this-
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_SITE_MASTER xmlns:ns0="http://sample-xitest.com/sitemaster">
- <SITE_DATA>
<STORE_CODE>N002</STORE_CODE>
<TITLE_MEDI>Company</TITLE_MEDI>
<STORE_NAME>Mount Road</STORE_NAME>
<STREET>Chennai</STREET>
<COUNTRY>IN</COUNTRY>
<SALES_TAX_NO>12345678910</SALES_TAX_NO>
</SITE_DATA>
<CURR_DATE>
<CURRENT_DATE>20051105</CURRENT_DATE>
</CURR_DATE>
</ns0:MT_SITE_MASTER>
So ur SITE_DATA is not having a field called CURRENT_DATE. This field is in separate node (segment ) called CURR_DATE. Now u can use the Suppress Logic for the same like this.
CURR_DATE.fieldFixedLengths - 0
CURR_DATE.fixedLengthTooShortHanling - Cut
And in your Variable Substitution you can use the date from the other segment called CURR_DATE.
Hope this solves ur problem.
Regards,
Moorthy

Receiver Determination Problem In Mail to File Scenario.

Hi All,
I am trying to do Mail to File Scenario. I defined two business systems, one s/w component in SLD and in IR I defined a DataType , MessageType and Two MessageInterfaces. In ID these are mail adapter settings I gave :-
Message Protocol :- POP3
Message Protocol :- XIPAYLOAD
MAIL ATTRIBUTES -- Enabled checkbox for "Use Mail Package"
 Content Encoding - "base64"
 Enabled checkbox for "Keep Attachments"
DEFAULT XI PARAMTERS --
 Default Interface Namespace -- http://mtf
 Default Interface Name -- mtf_mi1
And in Modules Tab I also defined the "PayloadSwapBean" module and swap.keyName and swap.keyValue.
Infact I followed all the steps specified in /people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step
But in SXMB_MONI this is the error I am getting :-
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_BE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No receiver could be determined</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Please help me out.
Thanks All,
Madhu.

Hi,
Please verify letter by letter if you haven't make a typo here:
Default Interface Namespace -- http://mtf
Default Interface Name -- mtf_mi1
please also make a test of your scenario in integration directory
please also do not use best efort quality of service
/wg
Message was edited by:
 Wojciech Gasiorowski

Problem in idoc to file scenario

hi
while creating the idoc to file scenario i am facing few problems.
1) My design time objects are working fine. i have checked my message mapping, message interface etc.. (all design time objects are in active mode).
2) In ID, i have tested my configuration in test configuration, its working fine there as well (in ID i am using 2 business service one for sender, one for receiver)
3) i am using my ecc6 training server as my sender and using my XI server as receiver.
4) i am sending idoc from ecc6 and converting it to file in XI server and saving it in XI server itself(my receiver in this case).
my error:
i send my idoc from we19 transaction, and i see a error message stating
that 'RCVR_DETERMINATION.NO_RECEIVER_CASE_ASYNC'
my doubts.
1) while sending the idoc from ecc6, is it mandatory to give process code in partner profile ( that is, assign an outbound function module to push the created idoc to the mentioned destination).
2) also is it mandatory to have a partner profile on the receiver side( XI in this case) along with inbound process code.
3) in my receiver adapter ( file adatper in this case ) i have used NFS protocal. is it rite?
kindly help me with this issue.
regards
manoharan

>
manoj murugesan wrote:
> 1) while sending the idoc from ecc6, is it mandatory to give process code in partner profile ( that is, assign an outbound function module to push the created idoc to the mentioned destination).
>
> 2) also is it mandatory to have a partner profile on the receiver side( XI in this case) along with inbound process code.
>
> 3) in my receiver adapter ( file adatper in this case ) i have used NFS protocal. is it rite?
>
>
> kindly help me with this issue.
>
>
> regards
> manoharan
and to 1 & 2 ref. below,
Configuration steps required for posting idoc's(XI) -
/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
ALE configuration for pushing idocs from SAP to XI -
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
3. NFS protocol is used to read/write files to the XI server itself. If you have to write to a local machine then use FTP

Problem with IDOC TO FILE Scenario

Hi Experts,
I am doing IDOC TO FILE Scenario.
I have done all the configuration.I have cretaed RFC,PORT,LS and Partner profile at both R/3 and
XI Side.
when I am trying to generate IDOC using we19 and I put the r/3 port,partner in sender and XI
port and partner in receiver it gives me error as "Port 'SAPCU6_100' does not exist in the table
of port descriptions.
Please help me.....
Regards

HI Saras,
Please go through the below weblog which has all the stpes which is required for ur scenario...I think screen by screen help u to debug ur problem and it will help u to find out the msitake which u have made.
File To IDOC - Part1 (SLD and Design):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC&
File To IDOC - Part2 (Configuration):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part2+(Configuration)&
File To IDOC - Part3 (Steps required in XI and R3):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part3(StepsrequiredinXIandR3)&
Thnx
Chirag

Problem Executing RFC to File Scenario

Hi,
I am currently working on RFC to File Scenario which is Asynchronous in Nature i.e. The RFC will send some data to XI and then it'll be dumped in an XML File on the shared drive.
Following are the steps which were performed by me :
1. i created an RFC Destination in R/3 using SM59 and entered the Required values as mentioned in the blog
The specified item was not found.
2. Then i entered the same values in the communication channel of the sender RFC adapter.
I tested it from R/3 and the connection was successful.
3. i created an RFC in SE37 in the R/3 and just added an existing table under the "tables" tab. No further code was written in it. I saved it and activated it.
4. All the IR and ID objects were made and activated and then the scenario was run by sending a single data row by pressing F8. The RFC showed a message of "System Failure" and while looking into the XI Server (SXMB_MONI) the message gave absurd values with a error symbol(it a Red Light symbol and there was no Red Flag).
Initially, the XML file was getting posted in the shared drive but after further execution it stopped.
I am unable to figure out the problem. Kindly let me know where i am going wrong and what needs to be done to correct it ?

Hi,
For Sending RFC asynchronously check for these points:
For RFC creation and importing please follow this discussion. Very useful:
Re: RFC to FILE
Specially reply by Udo Martens.
Also for sender RFC, check two things.
1) First step is Register your ProgramId using activiating the communication channel(XI). You should be able to see it in smgw(R/3)
smgw->Goto->Looged on Clients(Check it here)
2) Then use this registered programid in your RFC Destination,in R/3 (it is Case-Sensitive).
These are just common errors i have encountered sometimes.

Problem with SOAP to JDBC scenario. Please help!

Hi Experts,
I have configured a simple SOAP to JDBC scenario where the input data from webservice call is sent to JDBC for inserting into MSSQL database.
The problem is that even though I have setup the QOS in SOAP channel as EO but still in SXMB_MONI I can see the message getting processed as Synchrous but getting interface mapping not found error. But the data is getting inserted in the database.
Why is this not getting processed asynchrously? Please advice me if I am missing anything?
Thanks
Gopal

Hello Gopal,
Hope these lonks are useful to you:
SOAP to JDBC : EXCEPTION_DURING_EXECUTE
Re: need help on SOAP-JDBC-RFC Scenario
SOAP to JDBC/RFC - RFC/JDBC to SOAP XI Scenario
Thanks,
Satya Kumar

Soap - XI - File Scenario

Hi experts,
I need your help on this.
XI will receive a synch soap request with the following input parameters: date and supplierNo. With that input parameters XI has to find and retrieve (from a File Server) all the documents of that supplierNo for that specific date.
Do you know how to develop such scenario?
Thanks in advance
Pedro Leal
Edited by: Pedro Leal on Feb 13, 2008 6:17 PM

Hi Pedro !!
Based on your scenario description, maybe the best solution is to create a SOAP<->XI<->Proxy scenario where the Proxy could be ABAP or Java. I suggest a Proxy, because the receiver file adapter only writes files and the sender only picks files up based on a time interval and not on demand.
For example, the Java Proxy server could receive the request from XI, search the files and send them back as response. You need to check file sizes and if files content is XML or binary and maybe other details to see if this scenario only will we enough, or if you may need a BPM or more than one scenario, one for "prepare the files" and one that takes the "prepared" files and thru XI sends them back to the target as a response in a synch or async manner.
Regards,
Matias.
ps: please award points if helpful.

Problem during mail to file scenario

Hi all,
I ve done all configurations but it is showing an error in the Modules tab....
ModuleProcessorException: Error during processing local bean: localejbs/AF_Modulews/PayloadSwapBean caused by:

Hi Sathish,
Go through the links for ur developments.
/people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step
Mail-XI-file scenario
Email Adapter Throwing Error
Error during configuration of Sender Mail Adapter
regards
sreeni

JCO problem in SOAP to file scenario

Similar Messages

Maybe you are looking for