JCOerror: This system does not let you log on using a password

Hi,
"JCOerror: This system does not let you log on using a password"
This is the error message I get from MII tries to connect to the Production ECC using my credentials to perform a BAPI call.
These credentials work fine interactively (using the SAP GUI) and for BAPI calls from MII on SAP Development instances.
I can interpret this message in two ways:
- My login can not log on using password (though I can interactively)
- The server does not allow logging on using password only. (It might require to pre-authorize the connecting server as well).
I guess my question can be if this error requires adding additional rights to my login for the production environment, or if this is a global SAP setup for this system? Or something else?
In either way, what is required to have this work?
Thanks.

Hi,
Kindly try the following options.
Try executing the BAPI seperately in se37, using your login credentials.
Check whether RFC is enabled for the BAPI.
Check whether the SAP server is details are furnished correctly in "SAP Server"(available under "Data Services") editor.
We can ensure this by checking the connection status link in xMII.(Link is available under "Data Services").
If connection status is "Running" then SAP server setting configuration is fine. Else it is not configured properly.
Try executing the BAPI in BLS(Business Logic Services) using JCO connector.
I believe if any one of these scenarios fail then "Proxy Error" might thrown.
Thanks
Rajesh Sivaprakasam

Similar Messages

This system does not let you log on using a password

hi all, i am very new to sap basis. i have changed the below profile parameters in RZ10.
login/min_password_length=3
login/min_password_lowercase=1
login/min_password_uppercase=1
login/min_password_digits=2
login/min_password_specials=1
after changing values i restarted the Instance. But the problem is when i am trying to login to the system it is showing an error message : "This system does not let you log on using a password". I know why this error occurs...
but how to resolve this error? plz Help.
Thanks in advance

login/min_password_length=3
login/min_password_lowercase=1
login/min_password_uppercase=1
login/min_password_digits=2
login/min_password_specials=1
The correct parameter for Min password Lenght is login/min_password_lng.
You can change this at OS level restart and see how it goes...
Regards
Juan

Is anyone using iPhoto having a problem with the slide show using shatter where it does not let you put a title over photo?

Is anyone using iPhoto having a problem with the slide show using shatter where it does not let you put a title over photo? It use to work but it no longer lets you place a title over the opening photo.

Is your signature still current?(iPhoto '08, OS X Mountain Lion (10.8.4)) I can confirm this for iPhoto '11; Shatter will only show the text slide title between the slides. Ken Burns and Classic theme can still be set to overlay the caption and title directly over the slides.

This system does not have the minimum requirements

install graphics driver for windows 8.1 64 bit in my laptop (i3 processor).got error in this system does not have the minimum requirements

Hi: Your notebook is not supported by HP for W8.1. See if the W7 graphics driver from your notebook's support page works. Manually install it if the auto install doesn't work. This package provides the driver that enables the Intel High-Definition (HD) Graphics in supported notebook models that are running a supported operating system. If high-definition multimedia interface (HDMI) video output is supported, this package also installs the HDMI Audio Driver. File name: SP52195.exe

4.7 Desktop SW Update does not let you choose what drive to install onto

I have my 4.7 Desktop SW installed on my D: Drive. Today I checked for updates and it came back & told me that there was an update available that came out yesterday 6/5/2009 consisting of 111 MB. I clicked on the update button and let it install. It changed my application to be installed on the C: Drive. I do not want the BlackBerry Desktop Software to be installed on the C: Drive. I want it to be on the D: Drive but the update installation process does not give you the option to customize where you want it to be installed.
Is there a way to download the update and then choose where you want it to be installed?

Hi and Welcome to the Forums!
I just launced my DM and indeed receive the same message. There is a location that you can download DM from, but I don't know if it has this update or not...you can try: http://na.blackberry.com/eng/services/desktop/
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

HT1918 how do you change payment info when there is a pendent payment and you have a new card issued in a new country and the system will not let you do it?

Can any one help me, I want to change my credit card info. The system will not let me do it, as I have an open purchase and credit cards from one country A and need to change it to creditcard from country B and the system does not allow for it. Any suggestion?

Contact iTunes Customer Service
Apple Support iTunes Store Contact Us
And request assistance with your issue...

DVD Studio Pro2 does not let you turn off the subtitle in the DVD Player

Hello
When I create a DVD in DVD Studio Pro 2 with subtitles and I do not activate the VIEW option beside the Subtitle (in Advanced tab), it does not let me turn the off the subtitle in the DVD Player.
What could be the reason?
Thanks for your help
Christoph

Thanks for your interest to help me!
What I did in the three different language selection I selected the audio track and the subtitle.
But I did not select by any flag "View" = which would force it to play the subtitle.
Is there some where else where it has the force option to play always subtitles?
On the DVD Player I can change the subtitle but *not turn it off* by Mac, Win, and external Player.
Thanks and Greetings Christoph
Message was edited by: Christophgysin

After changing email on my apple id it is impossible to access icloud as it automatically comes up with the old email, without option to change. and it does not let me log in via the old.

Look above.

Welcome to the Apple Community Hovedbra.
Firstly, you need to change your details with Apple, Start here, change your country if necessary and go to manage your account. You may have already done this.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > iTunes & App store, scroll down and tap your ID)
If you are using iMessages or FaceTime, you will also need to log out and into your ID there too.

The password save prompt box does not appear on logging in to certain password protected webpages; is there another way of adding their passwords to Firefox sync?

Dear Firefox tech supporter,
I am Currently running:
Firefox v6.0.2;
Windows 7 fully updated at 19 Sept 2011 15:45 GMT;
Norton Internet Security 2011 (using Identity Safe) fully updated at same time as Windows 7;
Extensions to Firefox-
Norton Toolbar 2011.7.1.3;
Symantec IPS 3.1;
Add to Amazon Wish List Button 7.1;
Minimap Addon 0.3.13
Plugins
The usual suspects from Microsoft, Adobe, Wacom, Apple and Google, all of which are checked and no updates currently found.
With webpages such as <https://shop.avanquest.com/members/?company_rs=51>, PayPal and Windows Live e.g. after correct login details are entered into the online form and login is performed successfully. The "key" symbol does not appear to the left of the "awesome bar", neither does the password save pop up box and so the login details for the site cannot be saved in Firefox sync.
This is not specific to https secure sites, as I have been able to save the passwords for several https secure sites and conversely, I have been unable to save the passwords for some http non secure URLs. I have ensured that, whilst trying to enter a page or site into Firefox sync, it has the only tab open.
There does not seem to be a way of manually entering website details (URL, User Name, Password etc.) into Firefox Sync; how can I save the password details for such sites?
Thanks in advance for your help,
Chris Morris

Make sure that you do not run Firefox in permanent Private Browsing mode.
*https://support.mozilla.com/kb/Private+Browsing
To see all History and Cookie settings, choose:
*Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
*Deselect: [ ] "Always use private browsing mode"
*Tools > Options > Security: Passwords: "Remember passwords for sites"
See also:
*http://kb.mozillazine.org/User_name_and_password_not_remembered
*Saved Password Editor: https://addons.mozilla.org/firefox/addon/saved-password-editor/

Why does the family locator sesson timed out and will not let you log back in for 24 hours?

Sometimes when I log into family locator it says session timed out and signs you out? Than it makes you wait 24 hours or longer to log back in.

angery, Let's get your Family Locator sessions working properly! When this happens, have you tried closing and reopening your web browser? Are you signed into the Family Locator site as the Account Owner or Account Manager? The Family Locator app is also available on select mobile devices. Open the app store (e.g., Google Play , App Store , etc.) on your device and search for Verizon Family Locator. If the app appears in the search results, your device is compatible and you can download the app. This may be a great alternative to the Web Site. Please let us know which if you need further assistant.
TanishaS1_VZW
Follow us on Twitter @VZWSupport.

The share Button in Notification center of OSX Mountain Lion Does not let you tweet links

By default a link in twitter is shortened .But in notification center when you try to tweet from the share link button the link is not shortened . This seems to be a bug

Hadn't noticed that before. You could use a link shortener first like
https://bitly.com
but agree that's a bit inconvenient.

MacPro2008 This system does not meet the minimum system requirements for graphics cards. FCP

Running FCPX 10.0.8 not possible because the graphic card
ATI Radeon HD 2600 doesn't support FCP.
Which affordable and compatible graphic card does support FinalCutPro 10.0.8?

Hello RenéG
Check out the first article for a list of video cards compatible with your Mac Pro Early 2008 model. I have also provided a link to a video card that is currently being sold on the Apple Store website that is compatible as well.
Mac Pro (all models): Graphics card compatibility between models
http://support.apple.com/kb/ht2848
NVIDIA Quadro 4000 for Mac
http://store.apple.com/us/product/H3314LL/A/nvidia-quadro-4000-for-mac?fnode=53
Regards,
-Norm G.

Firefox on this computer does not let me post to U of Phoenix student web site

Firefox has been re installed twice in two days to try to make it work for my posts to student web site University of Phoenix. It works on my other computer.
== URL of affected sites ==
https://ecampus.phoenix.edu/portal/portal/public/login.aspx

Did you make sure to check your firewall settings before going after the router?
http://messenger-support.spaces.live.com/blog/cns!8B3F39C76A8B853F!1070.entry

I am leaglley blind I use a 5 inch window at the top of my screen to see what I am typing. This version does not let me see what I am typing because the window drops down about 1 to 2 inches, obscuring what I am typing. Is there a fix for this problem?

If there is no fix for this problem, how do I go back to the previous version?

laderamacguy took a look at it and added a black shape over the tab. he suggested i use a different template next time, such as the black template.

Will not let me log in, first time installing on this computer.

Will not let me log in, first time installing on this computer.

What is the error message you see when it will not let you log in... is it one of the below problems?
Sign Out When Sign In http://forums.adobe.com/thread/1450581?tstart=0 may help
-and http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html
And, just in case you ever have this problem...
BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
-and step by step http://forums.adobe.com/thread/1440508?tstart=0
-and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html
Mac Spinning Wheel https://forums.adobe.com/message/5470608
-Similar in Windows https://forums.adobe.com/message/5853430

JCOerror: This system does not let you log on using a password

Similar Messages

Maybe you are looking for