JcomboBox How display names, but return ids?
I am implemeting a combobox from a table (id, name). I want display the names, but when the user select a item, I want to get the id corresponding to the name selected
How i make this?
Search the forum for my "Combo Box Item" (without the spaces) example.
Similar Messages
-
Using Lov display name but save id
problem: using Lov display name but save id
solution: put the LOV on the name and use formValue item for the ID with the viewInstance and viewAttribute, and make a mapping for the form value
-
F4 for Editable field in ALV, display Name but capture ID
Hi Friends,
I have a ALV for which i have defined a Structure, which is passed to Fieldcatlog.
I have defined a Search help - ZUSER_NAME which has following fields to display.
USERID - USR02-BNAME
FNAME
LNAME
FULLNAME
So my structure for fieldcatalog has User-id which is linked to this search help with Domain XUBNAME.
So in my report i made this User-Id as editable and F4 available, everything is working fine.
when user does a F4, its displaying Userid,Fname,Lname and complete name.upon selection and save i am capturing the id and storing in the ztable.
But now i have a requirement that when user selects a value from this search help on F4, i need to display Fullname but capture the User Id. How can i do that?
This is something similar to the one we have in BSP- key-value pair.
how to do this in ALV.
Appreciate if someone can guide me thru.
Thanks,
Simha
Edited by: Simha on Sep 6, 2008 2:24 PMhai , this is example code for editing the F4 display .. check out this
REPORT zalv_editf4display.
*Type pools for alv
TYPE-POOLS : slis.
*structure for t582a tbale
TYPES : BEGIN OF ty_table,
infty TYPE infty,
pnnnn TYPE pnnnn_d,
zrmkz TYPE dzrmkz,
zeitb TYPE dzeitb,
dname TYPE dianm,
davo TYPE davo,
davoe TYPE davoe,
END OF ty_table.
*Structure for infotype text
TYPES : BEGIN OF ty_itext,
infty TYPE infty,
itext TYPE intxt,
sprsl TYPE sprsl,
END OF ty_itext.
*Structure for output display
TYPES : BEGIN OF ty_output,
infty TYPE infty,
itext TYPE intxt,
pnnnn TYPE pnnnn_d,
zrmkz TYPE dzrmkz,
zeitb TYPE dzeitb,
dname TYPE dianm,
davo TYPE davo,
davoe TYPE davoe,
END OF ty_output.
*internal table and work area declarations
DATA : it_table TYPE STANDARD TABLE OF ty_table INITIAL SIZE 0,
it_output TYPE STANDARD TABLE OF ty_output INITIAL SIZE 0,
it_pbo TYPE STANDARD TABLE OF ty_output INITIAL SIZE 0,
it_ittext TYPE STANDARD TABLE OF ty_itext INITIAL SIZE 0,
wa_table TYPE ty_table,
wa_output TYPE ty_output,
wa_ittext TYPE ty_itext.
*Data declarations for dropdown lists for f4
DATA: it_dropdown TYPE lvc_t_drop,
ty_dropdown TYPE lvc_s_drop,
*data declaration for refreshing of alv
stable TYPE lvc_s_stbl.
*Global variable declaration
DATA: gstring TYPE c.
*Data declarations for ALV
DATA: c_ccont TYPE REF TO cl_gui_custom_container, "Custom container object
c_alvgd TYPE REF TO cl_gui_alv_grid, "ALV grid object
it_fcat TYPE lvc_t_fcat, "Field catalogue
it_layout TYPE lvc_s_layo. "Layout
*ok code declaration
DATA:
ok_code TYPE ui_func.
*initialization event
INITIALIZATION.
*start of selection event
START-OF-SELECTION.
*select the infotypes maintained
SELECT infty
pnnnn
zrmkz
zeitb
dname
davo
davoe
FROM t582a UP TO 10 ROWS
INTO CORRESPONDING FIELDS OF TABLE it_table.
*Select the infotype texts
IF it_table[] IS NOT INITIAL.
SELECT itext
infty
sprsl
FROM t582s
INTO CORRESPONDING FIELDS OF TABLE it_ittext
FOR ALL ENTRIES IN it_table
WHERE infty = it_table-infty
AND sprsl = 'E'.
ENDIF.
*Apppending the data to the internal table of ALV output
LOOP AT it_table INTO wa_table.
wa_output-infty = wa_table-infty.
wa_output-pnnnn = wa_table-pnnnn.
wa_output-zrmkz = wa_table-zrmkz.
wa_output-zeitb = wa_table-zeitb.
wa_output-dname = wa_table-dname.
wa_output-davo = wa_table-davo.
wa_output-davoe = wa_table-davoe.
For texts
READ TABLE it_ittext INTO wa_ittext WITH KEY infty = wa_table-infty.
wa_output-itext = wa_ittext-itext.
APPEND wa_output TO it_output.
CLEAR wa_output.
ENDLOOP.
Calling the ALV screen with custom container
CALL SCREEN 0600.
*On this statement double click it takes you to the screen painter SE51.
*Enter the attributes
*Create a Custom container and name it CCONT and OK code as OK_CODE.
*Save check and Activate the screen painter.
*Now a normal screen with number 600 is created which holds the ALV grid.
PBO of the actual screen ,
Here we can give a title and customized menus
*create 2 buttons with function code 'SAVE' and 'EXIT'.
GIVE A SUITABLE TITLE
*& Module STATUS_0600 OUTPUT
text
MODULE status_0600 OUTPUT.
SET PF-STATUS 'DISP'.
SET TITLEBAR 'ALVF4'.
ENDMODULE. " STATUS_0600 OUTPUT
calling the PBO module ALV_GRID.
*& Module PBO OUTPUT
text
MODULE pbo OUTPUT.
*Creating objects of the container
CREATE OBJECT c_ccont
EXPORTING
container_name = 'CCONT'.
create object for alv grid
create object c_alvgd
exporting
i_parent = c_ccont.
SET field for ALV
PERFORM alv_build_fieldcat.
Set ALV attributes FOR LAYOUT
PERFORM alv_report_layout.
CHECK NOT c_alvgd IS INITIAL.
Call ALV GRID
CALL METHOD c_alvgd->set_table_for_first_display
EXPORTING
is_layout = it_layout
i_save = 'A'
CHANGING
it_outtab = it_output
it_fieldcatalog = it_fcat
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDMODULE. " PBO OUTPUT
*& Form alv_build_fieldcat
text
<--P_IT_FCAT text
*subroutine to build fieldcat
FORM alv_build_fieldcat.
DATA lv_fldcat TYPE lvc_s_fcat.
CLEAR lv_fldcat.
lv_fldcat-row_pos = '1'.
lv_fldcat-col_pos = '1'.
lv_fldcat-fieldname = 'INFTY'.
lv_fldcat-tabname = 'IT_OUTPUT'.
lv_fldcat-outputlen = 8.
lv_fldcat-scrtext_m = 'Infotype'.
lv_fldcat-icon = 'X'.
APPEND lv_fldcat TO it_fcat.
CLEAR lv_fldcat.
lv_fldcat-row_pos = '1'.
lv_fldcat-col_pos = '2'.
lv_fldcat-fieldname = 'PNNNN'.
lv_fldcat-tabname = 'IT_OUTPUT'.
lv_fldcat-outputlen = 15.
lv_fldcat-scrtext_m = 'Structure'.
lv_fldcat-icon = ''.
APPEND lv_fldcat TO it_fcat.
CLEAR lv_fldcat.
lv_fldcat-row_pos = '1'.
lv_fldcat-col_pos = '3'.
lv_fldcat-fieldname = 'ITEXT'.
lv_fldcat-tabname = 'IT_OUTPUT'.
lv_fldcat-outputlen = 60.
lv_fldcat-scrtext_m = 'Description'.
lv_fldcat-icon = ''.
APPEND lv_fldcat TO it_fcat.
CLEAR lv_fldcat.
lv_fldcat-row_pos = '1'.
lv_fldcat-col_pos = '5'.
lv_fldcat-fieldname = 'ZRMKZ'.
lv_fldcat-tabname = 'IT_OUTPUT'.
lv_fldcat-outputlen = 1.
lv_fldcat-scrtext_m = 'PERIOD'.
lv_fldcat-icon = ''.
APPEND lv_fldcat TO it_fcat.
CLEAR lv_fldcat.
lv_fldcat-row_pos = '1'.
lv_fldcat-col_pos = '6'.
lv_fldcat-fieldname = 'ZEITB'.
lv_fldcat-tabname = 'IT_OUTPUT'.
lv_fldcat-outputlen = 5.
lv_fldcat-scrtext_m = 'Time constraint'.
lv_fldcat-edit = 'X'.
*To avail the existing F4 help these are to
*be given in the field catalogue
lv_fldcat-f4availabl = 'X'.
lv_fldcat-ref_table = 'T582A'.
lv_fldcat-ref_field = 'ZEITB'.
APPEND lv_fldcat TO it_fcat.
CLEAR lv_fldcat.
lv_fldcat-row_pos = '1'.
lv_fldcat-col_pos = '7'.
lv_fldcat-fieldname = 'DNAME'.
lv_fldcat-tabname = 'IT_OUTPUT'.
lv_fldcat-outputlen = 15.
lv_fldcat-scrtext_m = 'Dialogmodule'.
lv_fldcat-icon = ''.
APPEND lv_fldcat TO it_fcat.
CLEAR lv_fldcat.
lv_fldcat-row_pos = '1'.
lv_fldcat-col_pos = '8'.
lv_fldcat-fieldname = 'DAVO'.
lv_fldcat-tabname = 'IT_OUTPUT'.
lv_fldcat-outputlen = 15.
lv_fldcat-scrtext_m = 'Start'.
lv_fldcat-edit = 'X'.
APPEND lv_fldcat TO it_fcat.
CLEAR lv_fldcat.
lv_fldcat-row_pos = '1'.
lv_fldcat-col_pos = '9'.
lv_fldcat-fieldname = 'DAVOE'.
lv_fldcat-tabname = 'IT_OUTPUT'.
lv_fldcat-outputlen = 15.
lv_fldcat-scrtext_m = 'End'.
lv_fldcat-icon = ''.
APPEND lv_fldcat TO it_fcat.
CLEAR lv_fldcat.
*To create drop down for the field 'DAVO'
with our own f4 help
ty_dropdown-handle = '1'.
ty_dropdown-value = ' '.
APPEND ty_dropdown TO it_dropdown.
ty_dropdown-handle = '1'.
ty_dropdown-value = '1'.
APPEND ty_dropdown TO it_dropdown.
ty_dropdown-handle = '1'.
ty_dropdown-value = '2'.
APPEND ty_dropdown TO it_dropdown.
ty_dropdown-handle = '1'.
ty_dropdown-value = '3'.
APPEND ty_dropdown TO it_dropdown.
CALL METHOD c_alvgd->set_drop_down_table
EXPORTING
it_drop_down = it_dropdown.
LOOP AT it_fcat INTO lv_fldcat.
CASE lv_fldcat-fieldname.
To assign dropdown in the fieldcataogue
WHEN 'DAVO'.
lv_fldcat-drdn_hndl = '1'.
lv_fldcat-outputlen = 15.
MODIFY it_fcat FROM lv_fldcat.
ENDCASE.
ENDLOOP.
ENDFORM. " alv_build_fieldcat
*& Form alv_report_layout
text
<--P_IT_LAYOUT text
*Subroutine for setting alv layout
FORM alv_report_layout.
it_layout-cwidth_opt = 'X'.
it_layout-col_opt = 'X'.
it_layout-zebra = 'X'.
ENDFORM. " alv_report_layout
PAI module of the screen created. In case we use an interactive ALV or
*for additional functionalities we can create OK codes
*and based on the user command we can do the coding.
*& Module PAI INPUT
text
MODULE pai INPUT.
*To change the existing values and refresh the grid
*And only values in the dropdown or in the default
*F4 can be given , else no action takes place for the dropdown
*and error is thrown for the default F4 help and font changes to red
*and on still saving, value is not changed
c_alvgd->check_changed_data( ).
*Based on the user input
*When user clicks 'SAVE;
CASE ok_code.
WHEN 'SAVE'.
*A pop up is called to confirm the saving of changed data
CALL FUNCTION 'POPUP_TO_CONFIRM'
EXPORTING
titlebar = 'SAVING DATA'
text_question = 'Continue?'
icon_button_1 = 'icon_booking_ok'
IMPORTING
answer = gstring
EXCEPTIONS
text_not_found = 1
OTHERS = 2.
IF sy-subrc NE 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*When the User clicks 'YES'
IF ( gstring = '1' ).
MESSAGE 'Saved' TYPE 'S'.
*Now the changed data is stored in the it_pbo internal table
it_pbo = it_output.
*Subroutine to display the ALV with changed data.
PERFORM redisplay.
ELSE.
*When user clicks NO or Cancel
MESSAGE 'Not Saved' TYPE 'S'.
ENDIF.
**When the user clicks the 'EXIT; he is out
WHEN 'EXIT'.
LEAVE PROGRAM.
ENDCASE.
CLEAR: ok_code.
ENDMODULE. " PAI INPUT
*& Form REDISPLAY
text
--> p1 text
<-- p2 text
FORM redisplay .
*Cells of the alv are made non editable after entering OK to save
CALL METHOD c_alvgd->set_ready_for_input
EXPORTING
i_ready_for_input = 0.
*Row and column of the alv are refreshed after changing values
stable-row = 'X'.
stable-col = 'X'.
*REfreshed ALV display with the changed values
*This ALV is non editable and contains new values
CALL METHOD c_alvgd->refresh_table_display
EXPORTING
is_stable = stable
EXCEPTIONS
finished = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " REDISPLAY -
InputListOfValues return display name but save the id
Hi,
I have a question about inputListOfValues. I have enabled the attribute xxxId in my VO as LOV and created the necessary view accessor. When running in the UI, I can see the LOV popup is launching correctly, and upon selecting the value in LOV, it returns the xxxId to the inputListOfValues input box. However, my requirement is to actually return xxxDisplay name to inputListOfValues inputbox, but when save, it is xxxId which got saved. Any ideas of how to achieve this? Seems like it's a common scenario and I tried to search for some sample codes for it, but could not find it.
Please help.
Thanks.
-MinaMay i know how to do this..
I have a employee form. I enter the name of employee.
I select the department name.
I want the corresponding department id to get populated.
The department id is the foreign key in the employee table.
I am using toplink and EJb and JSF
I have craeted data control from the EJB
Im dragging and dropping the data controls from data control palatte.
Thanks in advance
Thanks
Shri -
Search Help displaying description but returning ID
Hi All,
I have a textbox in web dynpro showing description (from table "Description" ) in a textbox after user selected some value from its search help.
The issue is, instead of description shown (which is correct), I want to process the value selected using its ID (from table "ID").
Both tables have child-parent relation.
Unfortunately, both "ID" and "Description" are not key. The keys for both table are GUID (another field).
Any suggested solution ?
TIA,
TonyHi Tony,
In your search help try using index.
You can use the index number to select the value.
I have some sample code, you can use this as per your requirement.
METHOD add_data .
DATA : lt_urls TYPE if_main_view=>elements_drp_text.
DATA : lr_element TYPE REF TO if_wd_context_node.
DATA : url LIKE LINE OF lt_urls.
Supply data for the node at runtime
REFRESH lt_urls[].
DO 5 TIMES.
url-key = sy-index + 1 .
CONDENSE url-key.
CONCATENATE `www.` url-key `.com` INTO url-url.
INSERT url INTO TABLE lt_urls.
ENDDO.
lr_element = wd_context->get_child_node( 'DRP_TEXT' ).
lr_element->bind_table( lt_urls ).
ENDMETHOD.
Hope this will help you.
Cheers,
Darshna. -
Hi Adobe.
I'd like to change my display name but it seems to be locked out in the options. I see this as a privacy issue.
If you cannot change the screen name could you please completely remove my forum account please?
nThat whole FAQ post. I'm guessing it's out of date, or whoever wrote it was as misinformed as the customer service rep I spoke to for an hour trying to resolve the issue.
As I said, the Forum screen name and Adobe screen name are seperate; feel free to go and change your adobe screen name and watch in wonder as your forum screen name remains the same and uneditable.
Click on your name at the top of the page ('welcome, XXX'), on the right you'll see 2 links. 'Edit forums profile' and 'Edit Adobe profile'. The directions in the FAQ post direct you to the 'Edit your Adobe profile' page (just through a different route) where you can see an editable field for your screen name. Go through to the forums profile page and you'll also see a screen name which may be different to your Adobe screen name, and is completely uneditable.
The two don't appear to be linked at all (which is completely contradicotry to the FAQ post).
I hope that helps. -
Multiple Accounts With Same Display Name Lync 2013
Hi All,
I have a single user in my Lync 2013 environment that sees three different users with the same exact display name. All three users have a different SIP address.
User1 - Melissa A. - [email protected]
User2 - Melissa A. - [email protected]
User3 - Melissa A. - [email protected]
Upon looking at the contact card, each user has the same display name but correct email address. However there is another email address line that appears underneath the original Send Email address line - on other computer's this appears as "IM".
The user is running a Windows Server 2012 Standard on a Hyper-V Virtual Machine. I've tried re-installing the Office 2013 suite as well as forcing an Global Address Book update from his local machine. All data is correct in Lync Server and Active Directory.
Can someone please advise? Could it be a corrupt database?
Thanks in advance,
AdrianHi Adrian,
You could try deleting the following data for the user.
1. User profile:
%userprofile%\AppData\Local\Microsoft\Office\15.0\Lync\[email protected]
2. Registry Key:
HKCU\Software\Microsoft\Office\15.0\Lync\[email protected]
3. Outlook Contact
Delete the related Contact Cards in Outlook
Hope it can be helpful.
Best regards,
Eric -
FileSystemObjectType: 0
Id: 2
ContentTypeId: "0x010100517BCCBD1C63034A8C1141184DAB12C5"
Title: null
OData__dlc_DocId: null
OData__dlc_DocIdUrl: null
zopv: "Paint Specification"
s2ue: "J"
We'd prefer to make a single call. It's too bad the REST Api doesn't return the data in the same format as the WCF service, which uses the Display Name and not Internal Name. It also includes the hyperlink to the document.Hi,
You can get the display name of fields with typedisplayname property.For more information,you can refer to the article:
http://msdn.microsoft.com/en-us/library/office/dn600182(v=office.15).aspx#bk_Field
Best Regards,
Eric
Eric Tao
TechNet Community Support -
How to link yahoo email & automatically update display name in im
foremost, got myself a new 8520...i'm actually surprised how somewhat integrated/very user-friendly blackberry is..so far, it seems to be the best device in the business in terms of messaging/communication...i'm still an android user tho... anyway, couple of questions :
1. you know you can "link" im ids to contacts easily, how to do it when you receive an email and you want to link/insert the email address of the sender to an existing contact ? you can do that but you have to copy and paste instead of "link to bb contact" like you do with im ids.
2. probably its feedback for future upgrade, if you want to link/add an emai id to your contact, it'll more practical if you highlight the sender's (display) name and just link to contact, yet under this contact the actual email address is shown+saved rather than the display name.
3. if you link an im id for example yahoo messenger to a contact, should the display name automatically be that of the contact name instead of manually changing the display name for each contact ?
4. hopefully in the near future, there's only 1 messaging app instead of having ym, google talk, bbm separately....
thanks.foremost, got myself a new 8520...i'm actually surprised how somewhat integrated/very user-friendly blackberry is..so far, it seems to be the best device in the business in terms of messaging/communication...i'm still an android user tho... anyway, couple of questions :
1. you know you can "link" im ids to contacts easily, how to do it when you receive an email and you want to link/insert the email address of the sender to an existing contact ? you can do that but you have to copy and paste instead of "link to bb contact" like you do with im ids.
2. probably its feedback for future upgrade, if you want to link/add an emai id to your contact, it'll more practical if you highlight the sender's (display) name and just link to contact, yet under this contact the actual email address is shown+saved rather than the display name.
3. if you link an im id for example yahoo messenger to a contact, should the display name automatically be that of the contact name instead of manually changing the display name for each contact ?
4. hopefully in the near future, there's only 1 messaging app instead of having ym, google talk, bbm separately....
thanks. -
Exchange Online Management cmdlets return Display Name instead of Identity
Hello,
We've got an issue when managing our Exchange Online environment using remote PowerShell.
We use Exchange management cmdlets to manage Exchange Online mailboxes. When we run, for example, the
Get-MailboxPermission or Get-RecipientPermission
cmdlets, it returns Display Names of the users with mailbox rights. Previously, when we initially tested remote PowerShell with Exchange Online, the cmdlets returned the
Identity property, which is unique and worked well for us. However, currently the cmdlets return the
Display Name, which is not unique and causes us issues. For example, in our environment there can exist two or more users with the same Display Name (see highlighted on the screenshot):
In cases when only one of the users is granted a permission, we cannot distinguish programmatically, which of the 2 users this is. Also, we cannot run cmdlets, such as
Get-SecurityPrincipal, to get more info about the principals who are granted the permission.
Is it possible to get the old behavior of the cmdlets back so that they return the unique
Identity instead of the non-unique Display Name? Or how do we workaround this?Hello,
Can anyone update on this? The issue causes us HUGE problems :( -
How to get the DISPLAY name for a page in 309
How do I get hold of the page DISPLAY name in Portal 309?
I need it for the purpose of created a custom greeting and page menu tree.
I can get the main internal name, but not the user friendly display name. It must be stored somewhere!
Regards,
JohnDid you find an answer for this? I am attempting to do the same thing. I want to create a portlet with all available pages to a user. I can not seem to find the display name table.
[email protected] -
Two methods with same name but different return type?
Can I have two methods with same name but different return type in Java? I used to do this in C++ (method overloading or function overloading)
Here is my code:
import java.io.*;
public class Test{
public static void main(String ar[]){
try{
//I give an invalid file name to throw IO error.
File file = new File("c:/invalid file name becasue of spaces");
FileWriter writer = new FileWriter(file ,true);
writer.write("Test");
writer.close();
} catch (IOException IOe){
System.out.println("Failure");
//call first method - displays stack trace on screen
showerr(NPe);
//call second method - returns stack trace as string
String msg = showerr(NPe);
System.out.println(msg);
} // end of main
public static void showerr(Exception e){
StringWriter sw = new StringWriter();
PrintWriter pw = new PrintWriter(sw);
e.printStackTrace(pw);
try{
pw.close();
sw.close();
catch (IOException IOe){
IOe.printStackTrace();
String stackTrace = sw.toString();
System.out.println("Null Ptr\n" + stackTrace );
}//end of first showerr
public static String showerr(Exception e){
StringWriter sw = new StringWriter();
PrintWriter pw = new PrintWriter(sw);
e.printStackTrace(pw);
try{
pw.close();
sw.close();
catch (IOException IOe){
IOe.printStackTrace();
return sw.toString();
}//end of second showerr
} // end of class
[\code]Overloading is when you have multiple methods that have the same name and the same return type but take different parameters. See example
public class Overloader {
public String buildError(Exception e){
java.util.Date now = new java.util.Date() ;
java.text.DateFormat format = java.text.DateFormat.getInstance() ;
StringBuffer buffer = new StringBuffer() ;
buffer.append(format.format(now))
.append( " : " )
.append( e.getClass().getName() )
.append( " : " )
.append( e.getMessage() ) ;
return buffer.toString() ;
public String buildError(String msg){
java.util.Date now = new java.util.Date() ;
java.text.DateFormat format = java.text.DateFormat.getInstance() ;
StringBuffer buffer = new StringBuffer() ;
buffer.append(format.format(now))
.append( " : " )
.append( msg ) ;
return buffer.toString() ;
public String buildErrors(int errCount){
java.util.Date now = new java.util.Date() ;
java.text.DateFormat format = java.text.DateFormat.getInstance() ;
StringBuffer buffer = new StringBuffer() ;
buffer.append(format.format(now))
.append( " : " )
.append( "There have been " )
.append( errCount )
.append( " errors encountered.") ;
return buffer.toString() ;
}Make sense ???
Regards, -
How to display name and display name of the role during request
Hi,
Is it possibe to display Role Name and Role Display Name on the "Select Roles" page during ROle Request for Others? In the "Roles Available" I can only see "Role Display Name". I was trying to look at "AssignRolesDataSet.xml" but was unable set what I need (for exmaple lookup-query...). How to achieve desired funcionality?
Best
mpHi,
I should implement your same funcionality, but looking for a solution I didn't find any useful suggestion.
Did you find the solution?
Thanks in advice
Daniele -
How do I change my display name to stop showing full name
I chose a display name yet every time I post something it shows my full name!! How can I change this? I have gone into my settings and set it so only I can see my real name, yet it still shows on all my posts in discussions.
Yes I about had a heart attack too - here's not only my full name but my full email address too, just flappin' in the breeze.
Does anyone here know how to contact these Jack Secret website techs at VerizonWireless.com? They've got some bugs to iron out, but they've insulated themselves thoroughly from us plebes.
First of all would be this infuriating little thing in these post forms that keep jumping you back to the last paragraph after you've made a paragraph break.
Secondly, I can think of n ...GRRRR - It just did it again...
Secondly, I can think of no circumstance in which I want to see my profile in any other mode than the way in which it's viewed by every other user. I've never been on any website forum where this bizarre bipolar thing was going on. Just show my profile as seen by others, thanks.
At the very least, put a notice on the profile edit page that tells people about... that bizarre bipolar thing - so they don't have to freak out at the apparent general broadcast of name and email address to the world, the exciting prospect of identity theft, etc.
Lastly, I can find no method by which a person can delete his Ve - RRRRRRRR!!!!!!!!!!
Lastly, I can find no method by which a person can delete his VerizonWireless community profile. This should always be an option, but not here. -
How Do You Rename the Magic Mouse's Actual Name (Not the Display Name)
Hi. The Magic Mouse's display name is Servant777 but it's actual name is really something like mouse no. 1 which I take was from the store that first paired the mouse to test it ( I usually have it tested first after buying things, not all the time but sometimes, can't remember, it was 3 years ago).
How do you kind of "reset" the Magic Mouse like it's the first time it's being used and paired. I've tried: disconnecting and removing it from the bluetooth preference as well the on in the Mouse settings. It'd be nice if there's some kind of reset but it doesn't change the actual name, only the disply name could be changed. Is there any Terminal command for this?
Thank you in advance. Have a great upcoming sunday mass/great weekend.
God bless,
Alvinhttps://discussions.apple.com/message/20940155#20940155#20940155
Maybe you are looking for
-
Hello, I'm using APEX 4.2.2.00.11 and I have a problem with the Date Picker. I can't select any day of the second week of the month (it happens for all months). Someone know if there are any reason (and how can I solve it) or is an APEX bug? Thank yo
-
Performance management overall rating
When i am navigating to the Give Final Ratings: Main Appraiser i want to enable the field for Overall Rating. Note i am able to see the overall ratings comments field but i am unable to see the Overall Rating that is linked to the Performance rating
-
Marketing attribute valid for a specific customer only?
Hi We have a requirement that a specific marketing attribute set should only be valid for a specific group of customers. Is this possible to define in customizing? Any other suggestions of how to solve this? BR Johan
-
I have recently purchased an album from iTunes but although I see it in my music library none off the songs play they just skip through to the next one repeatedly. I since downloaded another song and this work perfectly
-
Mac slow after Mavericks Upgrade
I recently upgraded my mac to Mavericks and now it is running very slow, and constantly rainbow wheeling? Is there something I can do to fix this. I just bought my Mac in August of 2013 so its basically new. It is especially bad in preview, it will f