JDBC Adapter can be used for sender / receiver for MS Access ?

Hi Experts
   I want to communicate with MS Access by using JDBC sender and receiver
   adapter ? How to set up ?
   Links/screen shots/etc..........
Adv thanx
regards
rakesh

Hi Rakesh ,
>>>> Why the driver is : jdbc:odbc:Driver={Microsoft Access Driver
(*.mdb)};DBQ=//xiserver/xitemp/db/TestDB.mdb ?
if your test data base file is TestDB.mdb you need to give the absolute path of the file to get access to JDBC adapter set so you can replace the file path with the corresponding path on your test system .
Please place the data base file in a directory where the XI system has share access.
Regards,
Nanda

Similar Messages

Can we use same Business Service for Sender and Receiver

Can we use same Business Service for Sender and Receiver

Hi
In addition to the above infomation explaining about the Business Service..
Business Service: Address an abstract business entity as the sender or receiver of messages.
Using a business service, you can define the technical or business subunits of the companies involved and then assign them the relevant interfaces.
The business services are used when configuring cross-company processes also..
regards
Kishore

Data types for Sender/receiver JDBC

HI experts,
I am very much confused how the data types shoudl be for the Sender/receiver for JDBC.
And is there any standard format where it should be used, or what is the strucutre to be used,.
Please let me know in clear and help me out in this regard,

refer these blogs for better informations on jdbc data types
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/file%252bto%252bjdbc
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/jdbc%252b2%252bjdbc (for reciever JDBC)
JDBC Receiver Adapter -- Synchronous Select Step by Step

What classes should I use to send/receive bytes inmediately?

What classes should I use to send/receive bytes inmediately? I mean, without using any buffers or whatever (I will implement this on my app), just the faster method.
Is InputStream/OutputStream the lowest level choice?
Thanks!

Hi!
Thank you very much for your help, I appreciate it a lot.
While I test my server, I execute ping www.myclienthost.com -t (my client games are in other office, in the same building, but different ISP) and I don't see anything strange, so I guess network is working perfectly. However, if I use wireshark (sniffer) and I see that my system fails (server does not send acks so client disconnects) is because my acks messages are not sended for 6 o 7 seconds (it should send them every 2 or 3). It seems thread is blocked. and after 6 or 7 seconds one message with 2 or 3 acks together is sent. So, I see that the thread handler blocked for a few seconds and this is doing my server is failing. Why client handler thread on my server is blocked? One question: every 2 or 3 seconds I have a thread that uses sleep that iterates thru client handlers and takes OutputStream and send one ack message for every client handler. My question is, in client handler class I have a method called SendInfo(String whatever) which encrypts and sends through OutputStream, should I protectd this method from accesing from two threads??? as acks thread and client thread can access at the same time. Could this be the problem??
EDIT: In my previous post I forgot to say what I found out with wireshark. Here I explain it. Sorry.
By the way, how can I debug threads?? I would like to know if my client thread is blocked in that critical moment.
Thanks a lot for your ideas and sorry for my English.
Edited by: Ricardo_Ruiz_Lopez on Jan 22, 2009 7:38 AM

HT204053 Can I use one Apple ID for two Apple IPhones?

Can I use one Apple ID for two Apple IPhones? I received an answer of yes.
Now another question. I have one ICloud Account, Two IPhones. Can I use Find my IPhone via the one ICloud Account? Can I see two IPhones on the map at the same time? or do I need to view the second phone via some other method.
Message was edited by: Hunter3D

Yes.
Cheers,
GB

Can we use same program ID for more than one RFC scenarios

Hi experts,
            I am working on a RFC to FILE scenario. I have created one TCP/IP connection in SM59 with a program ID. Can we use this program ID for more than one scenario. I have written code as below
data: iquote type standard table of ZIQMD initial size 0,
      IPRODUCT type standard table of ZPMS initial size 0,
      wa_quote type ZIQMD,
      wa_PRODUCT type ZPMS.
CALL FUNCTION 'Z_CBT_RFC_QUOTEMASTER'
TABLES
    I_QUOTE       = iquote          .
CALL FUNCTION 'Z_CBT_RFC_QUOTEMASTER' in background task DESTINATION
'ID4'
TABLES
    I_QUOTE       = iquote          .
COMMIT WORK.
CALL FUNCTION 'Z_CBT_RFC_PRODUCTMASTER'
TABLES
    IPRODUCT       = IPRODUCT          .
CALL FUNCTION 'Z_CBT_RFC_PRODUCTMASTER' in background task DESTINATION
'ID4'
TABLES
    IPRODUCT       = IPRODUCT          .
    COMMIT WORK.
when i am executing the code like this. i am able to send the data to 'Z_CBT_RFC_QUOTEMASTER' , but iam not getting data for 'Z_CBT_RFC_PRODUCTMASTER' interface. ID4 is the connection that i have created in SM59. with program ID as ABCD.
              Can i use the same connection for all interfaces.Please help in this, if we can use same connection for all interfaces. then how to make changes in XI.
Thanks in advance.
Thanks & Regards,
Poorna.

Just tried this and I can confirm that my earlier understanding was correct!
One of my colleagues confused me out and the conclusion is,
1. You need a separate TCP IP Connection for every interface with a Unique program ID.
Regards
Bhavesh

How can I use my itunes library for iphoto slideshow?

how can I use my itunes library for iphoto slideshow?

Here's a possible workaround:
Create the slideshow in Iphoto and add a theme and music.
Install Picasa and it will include the slideshow on it's indexed list.
Upload the slideshow to PicasaWebAlbums and send the link to anyone you wish.
The music and theme is preserved.
Caveat: My playback pictures appear darker than usual but that could be just lousy photography...:)
Example:https://picasaweb.google.com/mb2180/Kona2011?authuser=0&authkey=Gv1sRgCPGWz_qPrM XKZA&feat=directlink

Invalid Certificate Microsoft Outlook cannot sign or encrypt this message because you have no certificates which can be used to send from your e-mail address.

Hi,
I have a problem when trying to sign emails with an X.509 certificate in Outlook 2010. I constantly get the error message. The certificate is Verified for the email address I'm sending from.
"Invalid Certificate
Microsoft Outlook cannot sign or encrypt this message because you have no certificates which can be
used to send from your e-mail address."I have no problem with signing documents in Word 2010 with the same certificate, only when trying to send email.Every check I can perform confirms that there's nothing wrong with the certificate. Yet, Outlook still says it is invalid.I have even tried installing a second X.509 for the same email address just to check. Outlook doesn't seem to like either certificate.I know this has been posted before, but I'm completely stuck here.Thanks,~Dan

Hi,
You may have checked the option "Encrypt contents and attachments for outgoing messages" in Outlook, please uncheck this to test if the problem persists.
File -> Options -> Trust Center -> Trust Center Settings -> E-mail Security -> Clear the checkbox "Encrypt contents and attachments for outgoing messages" -> OK.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Need to know of a method / process that can be used to send the same msg to all those appearing in my email listings with the same extension after the "@" sign in their address(es) on my macbook [e.g., with "@gov.ca"; Snow Leopard].

Need to know of a method / process that can be used to send the same msg to all those appearing in my email listings with the same extension after the "@" sign in their address(es) on my macbook [Snow Leopard].

If you simply want to send the exact same message to everyone in your address book with emails ending in "@whatever.com", you can do the following:
Create an email with subject, message and attachments but no addresses
Open Address Book, All Contacts
Search in Address Book for @whatever.com
Select the results and drag them into the To: or Bcc: field of the email. If Bcc: then put your email address in the To: field.
Send the email
This will not personalize the emails (such as with "Dear firstname:" at the top of the message) but it will let you send an idential message to everyone who meets your criteria.

IDoc receiver AEE: Error "Configuration for Sender/Receiver Partner Number/Port is incorrect"

Hi all,
We are on PI 7.4 AEX SP 7. We are trying to get the following scenario working: Inhouse warehouse management system (JMS) --> PI --> ECC (IDoc)
Sender is configured as 3rd party technical system system with business system maintained in SLD
business system has logical system assigned in SLD
adapter specific identifiers show logical system in ID / NWDS
logical system is defined in receiver (ECC system)
partner profile is created in ecc for this very logical system (inbound parameters)
No mapping of EDI_DC40 node in ESB (complete node disabled)
no header mapping in ID / NWDS
receiver IDoc AEE adapter is configured to not enforce control record (Control Record in IDoc XML = Not Mandatory)
no Identifiers specified in receiver IDoc AEE adapter
My guts feeling is that this should work, however, it doesnt't. Failing with "The Configuration for Sender/Receiver Partner Number/Port is incorrect. Enter proper values in Sender/Receiver Component"
Any thoughts are highly welcome.
Cheers
Jens

Hi,
The error mentioned by you is not related to the port..but its related to the Application ...
IDoc 51 means idoc has been received in R/3 client and when it tries to process it ended in error..
Check with the functional consultant for the error you have received..
HTH
Rajesh

Can my employer view my activity (games, twitter usage, etc.) on my personal phone if I use the Citrix Receiver app to access corporate emails?

Can my employer view my activity (games, twitter usage, etc.) on my personal phone if I use the Citrix Receiver app to access corporate emails?

No, they cannot see this through Citrix. Citrix is only a 'window' for you to look into the company applications. You do not transfer info from the phone related to other activities.

Can we use IDOC_INPUT_ Message type for creating and changing the document

Hi,
I have a requirement to create or change the requisition data.
Can I use IDOC_INPUT_PREQCR01 function module for both the purpose.
OR shall I go for custom function module by using BAPI function modules to create or change the data.
Please help me in this regarding.
Answers will be rewarded.
Thank you.
Eswar

Hello Eswar
You could use the IDoc processing function module if you had the data already available in the IDoc specific format (which is unlikely). This would mean you are receiving the IDoc data from another SAP system.
Instead, check the BAPI explorer (transaction BAPI) if you can find an appropriate BAPI.
Regards,
Uwe

What adapter can i use to use my nano in a 2008 hyundai accent?

What adapter can I use to use my nano (bought 12/12) in my 2008 hyundai accent?
thanks for any info!!

Malcolm right.
You could make your own!

My laptop is connected to company LAN on wire and I have another active wifi connection provided by a router. Can I use the wifi connection for mozilla connection and the wired for everything else? I'm on Win7.

I have 2 simultaneous active connections:
no1: wired connection to company lan; private IP 172.19..
no2: wireless connection to unrestricted traffic router; private IP: 192.168...
my question: can I use the wireless connection for mozilla traffic and the wired for everything else?
I'm on Windows7 Prof, all security updates installed.

Go to Control Panel > Network and Internet > Network and Sharing Center >
Click Change adapter settings from left panel > Open the network connection you want to change the DNS servers for by right click and select Properties > Select
Internet Protocol Version 4 (TCP/IPv4) and click Properties button > Choose the
Use the following DNS server addresses > enter the IP address for a
Preferred DNS server as well as an Alternate DNS server.
Primary DNS: 8.8.8.8
Secondary DNS: 8.8.4.4
This IP belongs to Google public DNS.
Note: Wired connections are usually labeled as Ethernet, while wireless ones are usually labeled as
Wi-Fi or Wireless Network Connection.
Uncheck Internet Protocol version 6
Mark as Answer if it's worked. Thanks. Balamurugan_Subramaniyan

Trying to use iCloud sending server for other POP accounts

I have an iCloud email address, and 2 other non Apple POP email accounts set up in Mail running OSX 10.7.5. I've forwarded my 2 POP accounts to my iCloud address so mail coming to those email addresses will sync with my iOS devices via iCloud. On my Mac, if I reply to one of these messages, it wants to use the sending server for the POP account, which means the reply will not end up in my iCloud sent mail, and therefore won't sync with my iOS devices.
I tried to set up the POP account using the iCloud server with the following settings:
Server Name: smtp.mail.me.com
Default Ports 25, 465, 587
Use Secure Sockets Layer
Password Authentication
User Name: [email protected]
Password: My Apple ID Password
When I try to use this server when sending from these POP accounts, I get an error that Mail can't send with that server. I run the connection doctor, and everything checks out OK.
Is there a way I can accomplish this?
Thanks,
Dan

try logging in to your email account through the web browser and in the web client there should be auto forward setting set it up in the web client and delete the email account from mail and then all of your email will be forwarded to your icloud account on all youre devices

JDBC Adapter can be used for sender / receiver for MS Access ?

Similar Messages

Maybe you are looking for