JDBC Receiver Adapter and Oracle BLOB

Hi,
I would like to put some raw data into an ORACLE BLOB using XI. My idea was to put the data in an xml element, but the JDBC sender adapter doesn't seem to be able to cope with writing. Has anybody gathered experiences regarding this topic?
Kind regards,
Heiko

Hi,
The error saying it is unable to connect to the Database, so it may be the drivers problem. once check the drivers and its syntaxes.
Syntax :
http://www.devx.com/tips/tip/28818
For Download and configure the drivers :
http://www.aquafold.com/docs-jdbcdrivers-oracle10g.html
http://www.oxygenxml.com/database_drivers.html
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f04ce027-934d-2a10-5a8f-fa0b1ed4d88f

Similar Messages

How to modify oracle stored procedure for JDBC Receiver Adapter?

Hi all.
This is Urgent.
Scenario is
SELECT a TABLE with procedure and update column with it,
then send data to SAP System with RFC Adapter.
When I executed a sync bpm, scenario was finished internal error.
Pls, let me know how to correct procedure using JDBC Receiver Adapter?
Regrds all.
Procedure Code -
SET SERVEROUTPUT ON
CREATE OR REPLACE PROCEDURE zwtn2
IS
   v_seller_company      wtnivhd.seller_company%TYPE;
   v_invoice_no      wtnivhd.invoice_no%TYPE;
   v_report_date     wtnivhd.report_date%TYPE;
   v_customs_date     wtnivhd.customs_date%TYPE;
   v_ap_post_date     wtnivhd.ap_post_date%TYPE;
   v_gr_date          wtnivhd.gr_date%TYPE;
CURSOR l_cursor IS
   SELECT seller_company,
          invoice_no,
          report_date,
          customs_date,
          ap_post_date,
          gr_date
     FROM wtnivhd
    WHERE wtn_send_flag = 'N'
      AND rownum < 31
FOR UPDATE;
BEGIN
   OPEN l_cursor;
   LOOP
     FETCH l_cursor
      INTO v_seller_company,
           v_invoice_no,
           v_report_date,
           v_customs_date,
           v_ap_post_date,
           v_gr_date;
     EXIT WHEN l_cursor%NOTFOUND;
     UPDATE wtnivhd
        SET wtn_send_flag = 'Y'
       WHERE CURRENT OF l_cursor;
   END LOOP;
CLOSE l_cursor;
END zwtn2;

Hi Alex,
plz have a look to Runtime Workbench / Adapter Monitoring to find an error message.
Regards,
Udo

JDBC receiver adapter: Insert of CLOB into Oracle DB

Hi,
I've got a short question:
Is it possible to insert CLOB fields (larger than 4kB) into an Orcale database using the JDBC receiver adapter without using a stored procedure?
We are on XI 3.0 SP20.
I had someting in mind that this is only possible with a stored procedure but I am not sure on this.
Thanks and Regards,
Helmut

HI,
Is it possible to insert CLOB fields (larger than 4kB) into an Orcale database using the JDBC receiver adapter without using a stored procedure?
yes, you can do it but it is not a best practise, but using Stored Procedure is .
Regards,
karna...

JDBC Receiver Adapter Error

Hi All,
I am executing SP by using JDBC Receiver Adapter.
My strcture is follows
<STATEMENT2>
<SP_CREATE_T_BATCH action="EXECUTE">
<spName type="VARCHAR">SP_CREATE_T_BATCH</spName>
<IN_Control_Recipe hasQuot="No" type="Integer">100000000001723850</IN_Control_Recipe>
</SP_CREATE_T_BATCH>
</STATEMENT2>
The below error I am getting
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'SP_CREATE_T_BATCH' (structure 'STATEMENT2'): java.lang.NumberFormatException: For input string: "100000000001723850"
Any help on this

Hi Ram,
Since you mentioned that your SP has one input parameter and one output parameter, the structure of the XML message at the JDBC receiver side should be:
<STATEMENT2>
<SP_CREATE_T_BATCH action="EXECUTE">
<IN_Control_Recipe isInput="true" hasQuot="No" type="BIGINT">100000000001723850</IN_Control_Recipe>
<Output_Parameter isOutput="true" type="SQLDataType"></Output_Parameter>
</SP_CREATE_T_BATCH>
</STATEMENT2>
Here, i have assumed the following:
SP_CREATE_T_BATCH - The name of the Stored Procedure to be executed
IN_Control_Recipe - Input parameter of the SP and its SQLDataType is BIGINT as suggested by Stefan.
Output_Parameter - Output parameter of the SP. You may enter the SQL data type as per the output of your Stored Procedure.
The following SQL data types are supported:
INTEGER, BIT, TINYINT, SMALLINT, BIGINT, FLOAT, REAL, DOUBLE, NUMERIC, DECIMAL, CHAR, VARCHAR, STRING, LONGVARCHAR, DATE, TIME, TIMESTAMP, BINARY, VARBINARY, LONGVARBINARY, BLOB (input and output),CLOB (input and output), CURSOR (output; only in conjunction with the Oracle JDBC driver).
Hope this will surely solve your problem.
Regards, Gaurav.

Jdbc receiver adapter

Hi all,
I want to insert data into two tables and want to get data from one of those tables(using SELECT in the attribute 'action') after they are inserted with the data.
So how should be my receiver jdbc datatype structure.
Can anybody please tell me?
Thanks & Regards
Radhika.

Check this blog for Synhronous select of data froma Database,
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
/people/jegathees.waran/blog/2007/03/02/oracle-table-functions-and-jdbc-sender-adapter
Please see the below URL for logic.
http://www.flickr.com/photos/8764045@N06/549186611/
http://www.flickr.com/photos/8764045@N06/549186651/
hope it will help u ..

JDBC Receiver Adapter -- Synch Select. ERROR

Hello,
We have implemented the scenario described by Bhavesh Kantilal in blog 3928:
JDBC Receiver Adapter -- Synchronous Select Step by Step
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
but modified to our requirements.
An Idoc is coming in, mapped to a sync receiver jdbc as described to collect data from a jdbc table.
Result when connecting the oracle database with the jdbc receiver adapter:
Error processing request in sax parser: Error when executing statement for table/stored proc. 'T_ST_MAINDRIVER' (structure 'STATEMENT'): java.sql.SQLException: ORA-00942: table or view does not exist
Oh, like to complete the information by the payload from the jdbc rec. connect:
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_JDBC_LOOPUP_ID xmlns:ns0="http://www.xxx.org/excel">
- <STATEMENT>
- <TABLENAME ACTION="SELECT">
<TABLE>T_ST_MAINDRIVER</TABLE>
<ACCESS />
- <KEY>
<MAINDRIVER compareOperation="=">Optomechanical</MAINDRIVER>
</KEY>
</TABLENAME>
</STATEMENT>
</ns0:MT_JDBC_LOOPUP_ID>
The table exists on the database. So, what is our mistake? Do you have any ideas?
Best regards
Dirk
Message was edited by:
        Dirk Meinhard
Message was edited by:
        Dirk Meinhard

Hi Anil,
I am back on my JDBC problem and I am one step further!
Thank you for this hint. Looks like this is the solution.
So I like to add my next question !
My new error is resulting from my query command.
I have set "=" to find a specific entry as compare operation.
Error when executing statement for table/stored proc. 'IRIS.T_ST_MAINDRIVER' (structure 'STATEMENT'): java.sql.SQLException: FATAL ERROR document format in structure 'TABLENAME': unexpected value '=' for attribute 'compare' found
Looks like this is not ok .
This is my xml of this query:
<ns0:MT_JDBC_LOOPUP_ID xmlns:ns0="http://www.xxx.org/excel">
   <STATEMENT>
      <TABLENAME ACTION="SELECT">
         <TABLE>IRIS.T_ST_MAINDRIVER</TABLE>
         <ACCESS/>
         <KEY>
            <MAINDRIVER compareOperation="=">Optomechanical</MAINDRIVER>
         </KEY>
      </TABLENAME>
   </STATEMENT>
</ns0:MT_JDBC_LOOPUP_ID>
Can you, or anybody else, give the helping idea?
regards
Dirk

JDBC Receiver adapter-java.sql.SQLException: ORA-00904: "BATCH_ID": invalid

Hi
I am trying insert rows in Oracle database using JDBC receiver adapter setup in PI 7.1. However this receiver adapter is throwing following exception.
Delivering the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'PRADEEP_OTC_ORDERS' (structure 'statement'): java.sql.SQLException: ORA-00904: "BATCH_ID": invalid identifier .
<?xml version="1.0" encoding="UTF-8" ?>
<ns0:mt_sql_writer xmlns:ns0="http://rdbms_poc">
<statement>
     <dbtablename action="INSERT">
          <table>PRADEEP_OTC_ORDERS</table>
          <access>
               <order_id>19126</order_id>
               <version>1</version>
               <batch_id>132</batch_id>
          </access>
     </dbtablename>
</statement>
</ns0:mt_sql_writer>
PRADEEP_OTC_ORDERS table has just 3 columns as specified the access segment. However I stil get this ORA-00904 error message.
Any idea on what could be wrong.?
Thanks
-Pradeep

Hi All,
Thanks a lot for responding...
I verified the table structure, table just contains those 3 coulms all varchar type.
I modified the column name as well, But was still getting ORA-00904. Then I went directly to the the database and executed below insert statement,
insert into PRADEEP_OTC_ORDERS (mps_order_id, mps_version,mps_batch_id) Values(1,2,3)
I got exact SQL Error: ORA-00904: "MPS_BATCH_ID": invalid identifier.
So ISAP JDBC adapter is not enclosing the string values in quotes.
SAP documentation says it puts quotes for values and treats everything as string(text).
Anybody has any idea, why JDBC receiver adapter not enclosing the values in quotes?
Thanks
-Pradeep

JDBC Receiver Adapter - Call Stored Procedure

Hi,
I am using a JDBC receiver adapter to call a stored procedure in oracle.
My target structure looks like:-
<STATEMENT>
<storedProcedureName action="EXECUTE">
<table>realStoredProcedureName</table>
<serialDate hasQuot="NO" isInputType="true" type="date">TO_DATE('07-15-2008 08:00:11','MM-DD-YYYY HH24:MI:SS')</serialDate>
<serialNo isInputType="true" type="NUMERIC">123456</serialNo>
</storedProcedureName>
</STATEMENT>
The storedprocedure takes two input values and has one output value.
The first parameter of the stored procedure is serialDate and the second input parameter is serialNo.
I am getting an exception:-
<SAP:AdditionalText>com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'storedProcedureName' (structure 'STATEMENT'): java.lang.NumberFormatException: For input string: "TO_DATE('07"</SAP:AdditionalText>
Any ideas how to fix this issue.
Thanks.
Krishnan

Hi Krishnan,
<STATEMENT>
<storedProcedureName action="EXECUTE">
<table>realStoredProcedureName</table>
<serialDate hasQuot="NO" isInputType="true" type="date">TO_DATE('07-15-2008 08:00:11','MM-DD-YYYY HH24:MI:SS')</serialDate>
<serialNo isInputType="true" type="NUMERIC">123456</serialNo>
</storedProcedureName>
</STATEMENT>
The storedprocedure takes two input values and has one output value.
The first parameter of the stored procedure is serialDate and the second input parameter is serialNo.
I am getting an exception:-
<SAP:AdditionalText>com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'storedProcedureName' (structure 'STATEMENT'): java.lang.NumberFormatException: For input string: "TO_DATE('07"</SAP:AdditionalText>
In the XML structure you cannot use TO_DATE function . Please pass the DATE in the correct format which the Stored procedure can accept . Get the out put what you expected from TO_DATE function and use that value in the structure.
Regards,
Kishore

Issue with processing time of JDBC receiver adapter

Hi all,
We are using PI 7.1 EHP1.
We have an issue with JDBC receiver adapter taking too much time to process messages.
We are using XML SQL format message protocol with INSERT_UPDATE as the document format.
Each message can contain multiple records, i.e. 1 single message can result in many updates/inserts.
Currently, time taken to process in 6-12 secs which is quite high considering the messages are not very large in size.
We sent the statements to Oracle DBA to see if anything about the queries being used is causing issues. Awaiting inputs.
In the mean time, wanted to check if there is anything that can be done from PI side that will help us improving the processing time.
Thanks in Advance,
Sailaja.

Hi,
       i think the main cause is query taking long time to execute in DataBase.
      -> increase the read time and response time in the JDBC receiver adapter.
In the advanced mode table section of sender channel and receiver channel configurations, we can set driver properties for each DB connection. Any such property would have to contain prefix 'driver:'(with out quotes).
For Oracle Database JDBC thin driver 10.2.0.3 version, the property oracle.jdbc.ReadTimeout helps to set read timeout while reading from the socket. Also for setting login time out in Oracle, we use oracle.net.CONNECT_TIMEOUT. To set these two properties use as follows: driver:oracle.jdbc.ReadTimeout 1000 driver:oracle.net.CONNECT_TIMEOUT 1000 The TimeOut Driver properties like ReadTimeout and CONNECT_TIMEOUT are in milliseconds.
Refer note 1078420 for more details
please go through this blog i hope it will help you.
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c059d583-a551-2c10-e095-eb5d95e03747
regards,
ganesh
Edited by: ganesh.nijampudi on Oct 25, 2011 12:00 PM

A wierd error of JDBC Receiver adapter

Dear Expert,
I got stuck by the JDBC receiver adapter with PI 7.11, the log is
'JDBC Message processing failed, due to Error processing request in sax parser: Error when executing statement for table/stored proc. 'null' (structure 'SYSTEM'): java.lang.IndexOutOfBoundsException: Index: 1, Size: 1'
explanation :
(1)SYSTEM is the first element in my XML sent to PI and I guarantee it has value, and there is no mapping with this field in the target table.
(2)I tested mapping and comminucation channel -> successfully
(3)db is oracle and the key field is mapped with value
Looking forward to your insight. Thanks very very much
Ray

Dear Expert :
Thanks for your reply, but I still could not figure out what had happened, it is so desperate.......
     Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'null' (structure 'BOOK'): java.lang.IndexOutOfBoundsException: Index: 1, Size: 1
The Oracle DB table has many fields and I mapped the key and other fields which could not be null.
I tried to create a very simple example to test like this , but still it pops up the error like before,
you can see the error message just replaces the text 'SYSTEM' to 'BOOK'.
'null' (structure 'SYSTEM'): (yesterday) ->   'null' (structure 'BOOK'): (today).   What could I do????
Thanks so much for your help
<?xml version="1.0" encoding="UTF-8" ?>
<MT_RM_TEST>
<BOOK>17-1627-15</BOOK>
<NAME>Ray</NAME>
</MT_RM_TEST>
-> the XML above is my simple test XML sent (book and name are mapped to the key field and other fields which could not be nulll)

Store procedure in JDBC Receiver adapter

Hi,
I am calling stored procedure using jdbc reeciver adapter . showing below error. In oracle database it is under functions not in the procedure. functions and stored procedure are same? is it should be create under procedure?
error message:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'GET_ALL_SALESREPINFO' (structure 'statement'): java.sql.SQLException: ORA-06550: line 1, column 7: PLS-00221: 'GET_ALL_SALESREPINFO' is not a procedure or is undefined ORA-06550: line 1, column 7: PL/SQL: Statement ignored
Sql query:
<?xml version="1.0" encoding="UTF-8"?>
<ns1:TerritoriesAndSalesRepsRequest xmlns:ns1="http://allergan.com/TerritoriesAndSalesRepsServiceList/1.0">
<statement><GET_ALL_SALESREPINFO action="EXECUTE">
<P_REP_LOGIN isInput="1" type="VARCHAR">sdfsfd</P_REP_LOGIN>
</GET_ALL_SALESREPINFO>
</statement></ns1:TerritoriesAndSalesRepsRequest>
oracle function
DECLARE
     RETURN_VALUE BEACONDM_ETL.ACCT_TABLE_TYPE;
     P_ZIP_CODE VARCHAR2(2000) := '-';
BEGIN
     RETURN_VALUE := BEACONDM_ETL.GET_ACCT_INFO(P_ZIP_CODE);
     --DBMS_OUTPUT.PUT('RETURN_VALUE: ');
     --DBMS_OUTPUT.PUT_LINE(RETURN_VALUE);
     DBMS_OUTPUT.PUT('P_ZIP_CODE: ');
     DBMS_OUTPUT.PUT_LINE(P_ZIP_CODE);
END;
GO
DECLARE
     RETURN_VALUE BEACONDM_ETL.SALESREP_TABLE_TYPE;
     P_REP_LOGIN VARCHAR2(2000) := '-';
BEGIN
     RETURN_VALUE := BEACONDM_ETL.GET_ALL_SALESREPINFO(P_REP_LOGIN);
     --DBMS_OUTPUT.PUT('RETURN_VALUE: ');
     --DBMS_OUTPUT.PUT_LINE(RETURN_VALUE);
     DBMS_OUTPUT.PUT('P_REP_LOGIN: ');
     DBMS_OUTPUT.PUT_LINE(P_REP_LOGIN);
END;
GO
Please send me if you have any blogs for calling stored procedure using jdbc receiver adapter.

Hi Madhu,
>>>I am calling stored procedure using jdbc reeciver adapter . showing below error. In oracle database it is under functions not in the procedure. functions and stored procedure are same? is it should be create under procedure?
Of course there is difference between Oracle functions & Stored procedures:
Re: Populating DropdownByKey by accessing backend
As far as i know and have configured and used Stored procedures with the JDBC adapter, it can be used with Oracle stored procedures (leave it to the experts to comment on the Oracle functions part). So if you change it to stored procedure then it should work fine.
You may then define your Message structure as follows:
http://help.sap.com/saphelp_nw73/helpdata/en/44/7b72b2fde93673e10000000a114a6b/content.htm
And you may also like to refer the following blog on stored procedures:
PI JDBC Stored Procedure test scenario
Hope this helps. Regards, Gaurav

JDBC Receiver Adapter Error with SAPClassNotFoundException

HI Friends,
I have configured the JDBC Receiver Adapter with parameters as
Driver: oracle.jdbc.driver.OracleDriver
Connection: jdbc:oracle:thin:@10.15.96.29:1525:RMOSDB
XI 700, Oracle DB 10.2
I have installed JDBC driver for Oracle as guide How Install and Configure External Drivers for the JDBC & JMS Adapters.pdf. I can see file ojdbc14.jar at D:\usr\sap\<SID>\DVEBMGSNN\j2ee\cluster\server0\bin\ext\com.sap.aii.af.jmsproviderlib.
But Im still getting an error SAPClassNotFoundException as following:
#XI AF com.sap.aii.adapter.jdbc.XI2JDBC@1497c21##0#0#Error#1#com.sap.aii.adapter.jdbc.XI2JDBC#Plain###Accessing database connection 'jdbc:oracle:thin:@10.15.96.29:1525:RMOSDB' failed: com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:oracle:thin:@10.15.96.29:1525:RMOSDB': SAPClassNotFoundException: oracle.jdbc.driver.Oracledriver#
#XI AF com.sap.aii.adapter.jdbc.XI2JDBC@1497c21##0#0#Error#1#com.sap.aii.adapter.jdbc.XI2JDBC#Plain###JDBC_ERR_207#
#Error#1#com.sap.aii.adapter.jdbc.XI2JDBC#Plain###Accessing database connection 'jdbc:oracle:thin:@10.15.96.29:1525:RMOSDB' failed: com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:oracle:thin:@10.15.96.29:1525:RMOSDB': SAPClassNotFoundException: oracle.jdbc.driver.Oracledriver#
I tried to install JDBC driver again but it was not solve this problem.
Please suggest!
Regards,
Cuong

HI Cuong,
It seems something wrong with the installation of JDBC driver or in the config parameters for Adapter.
Not sure if driver is case sensitive.
But from the log it shows "oracle.jdbc.driver.Oracledriver".
Try putting "oracle.jdbc.driver.OracleDriver".
regards,
Pinkle

Delay in JDBC Receive Adapter

Hi Everyone.
I have an asynchronous scenario, RFC -> PI -> JDBC (Oracle DB)... This does an UPDATE in each message... When try to process 400 message the time of execution in the DB takes 2 minutes. For the client, this time is too long, but I've done everything and the time does not improve.
This is the message:
<?xml version="1.0" encoding="UTF-8"?>
<ns1:SQLString xmlns:ns1="urn:envioinventario:sap:seus">
<Statement>
<Inventario action="SQL_DML">
<access>UPDATE Inventario SET CAN = 65.0, CAN_CD = 876.9 WHERE C_EMP = 'JA' AND BOD = '72' AND COD = 'T9876'</access>
</Inventario>
</Statement>
</ns1:SQLString>
And this is the configuration of the cc:
Please, I need help, I don't know what else to do.
Thank you so much.
CRISTINA M. H.

Hi Cristina,
the below blogs might be helpful to increase hte performance of scenario
XI/PI File and JDBC Receiver Adapter performance and availability improvements
JDBC Receiver scenarios best practices - How to handle High volume load-Stored procedure design-Part5
Decoding Max Concurrency ,poolWaitTime ,Driver properties in JDBC receiver Adapter Configuration
regards,
Harish

Executing Select query using JDBC Receiver Adapter

I created couple types in Oracle and also new function instead of procedure
Can I execute the above query using JDBC Receiver Adapter.
select *
from the ( select cast( apr.get_distribut('', '', '', 'hdfcgd', 'CAN') as dsrTable )
         from dual );
If possible how my message structure should look like...

Hi vikram,
   If you use JDBC as Receiver Adapter you can only post the data to the data base I do no think so we can select the records from the data base.
   If you use JDBC as Sender hope,we can the select query in the sender communication channel.
    Hope I am clear.
Thanks and Regardds,
Chandu.

Error while updating database using jdbc receiver adapter

Hi All,
I am trying to update a single record using jdbc receiver adapter.
This is my the message that is getting created..
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:Data xmlns:ns0="urn:Test">
- <STATEMENT>
- <TABLENAME ACTION="UPDATE_INSERT">
<TABLE>ORDERS</TABLE>
- <ACCESS>
<OrderID>99999</OrderID>
<CustomerID>VICTE</CustomerID>
<EmployeeID>3</EmployeeID>
<ShipAddress>VICTE</ShipAddress>
</ACCESS>
- <KEY>
<OrderID compareOperation="EQ">99999</OrderID>
<ShipAddress compareOperation="EQ">VICTE</ShipAddress>
</KEY>
</TABLENAME>
</STATEMENT>
</ns0:Data>
But in Adapter Monitoring i am getting the following error..
<i>Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement for table/stored proc. 'ORDERS' (structure 'STATEMENT'): java.sql.SQLException: [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near 'VICTE'.</i>
Regards,
Rahul

Rahul,
> In this case i believe the interface has to be synch.
> So what will the response message type be like..
Not necessary. UPDATE can be asynch as well.
Can you turn the trace on like pointed by Michal and then you can see the Query in the Audit Log of the adapter montioring. Try to execute the same query from your DB Client like TOAD and see what is the Syntax error you are getiing.!
The problem looks like some field has some dataype / column name mismatch.
Regards
Bhavesh

JDBC Receiver Adapter and Oracle BLOB

Similar Messages

Maybe you are looking for