JDBC-RFC Scnario mapping problem

Hi friends,
I have a requirement where i need to fetch one single row from database and then post the data into rfc, header+11 rows and amount vallue colume should not be null in that 11 rows.. Please help me how to map to achive this,,

Hi thanks a lot replying....
That blog and the suraj said are helpfull ..
see as the blog convays that from source UserSQL_1 it has mapped to user_1 and message1..
ok that fine.. now i require same kind of message1----message11. and these values are depended on UserSql_1 data...for example source: is
A.................../A (source)
B................../B
                                                   A......../A (destination)
                                                   .a......./a
                                                   b....../b (for example : b= A20+ A15)
                                       .           k..../k
.                                                    B............/B
                          .                          a.........../a
                                                     k......./k
                                                      C............../C
Edited by: vijay Kumar on May 5, 2008 12:06 PM
Edited by: vijay Kumar on May 5, 2008 12:09 PM

Similar Messages

JDBC- XI- File Mapping Problem

Hi everyone,
I have the mapping problem. atried a lot of possibilities, but unfortunately nothing helps... JDBC adapter returns (in my case - I'm just selecting SYSDATE from dual) this structure
<resultset>
<row>
<SYSDATE>....</SYSDATE>
</row>
</resultset>
I'm using 2 datatypes:
a, row (it is called so) which is complextype and consists of subelement SYSDATE, which is string
Exastly: row->SYSDATE
b, resultset (it is called so) is complex type which consists of subelement of type row(type a - see above) (and this subelement is also called row) ...and it has of course subelement SYSDATE, which is String (see the data type a above)
Exactly: resultset->row->SYSDATE
The data type b is used for the outbound interface in the message coming from the JDBC Adapter, the type a is used for message type sent into the File Adapter
(exactly: Message1String is the ResutSet Type(b), Message1String2 is the Row(a) type)
Can somebody help me, what is wrong? I do always get mapping error... :O(
Thanx, Peter

So your message type has a different name?
Take the name of your message type and link this to "document name" of your JDBC adapter configuration.
Compare the xml output of the JDBC adapter (take this from the SXMB_MONI payload) with the default structure of the mapping (go to the mapping tool, test mode, create a new test and view the xml structure)
Regards
Stefan

JDBC to IDoc Mapping Problem

Hello,
I have a connection going from a SQL (via a JDBC connection), mapping into an IDOC. Connections all work, but for some reason when I turn on the communication channel to pull from the database through a SELECT statement, I only get the header of the Idoc (below). I have tried many different things and cannot see why the mapping does not seem to be working. When I load the test data as a test instance in the mapping, it works. Any help would be appreciated.
Thank you.
<?xml version="1.0" encoding="UTF-8" ?>
<CRMXIF_PRODUCT_MATERIAL_SAVE01 />

Hi,
Document Name
The document name is inserted in the message as the main XML tag. The default value is resultset.
Document Namespace
The namespace is added to the document name.
See the example below
The system converts the table resulting from the query SQL statement into a valid XML document and sends it to the Integration Engine. The document looks like this:
<resultset>
<row>
<column-name1>column-value</ column-name1>
<column-name2>column-value</ column-name2>
<column-name3>column-value</ column-name3>
</row>
<row>
<column-name1>column-value</ column-name1>
<column-name2>column-value</ column-name2>
<column-name3>column-value</ column-name3>
</row>
</resultset>
Regards
Chilla..

Jdbc-rfc synchronous scenario

Hi...All,
we r plaing to do JDBC-RFC Synchronous Scenario with out BPM,please tell me any settings are required for this scenario.any body is having any links regarding this type of scenario pls share with me...that is helpfull for me...
thanks in advance,
Pasi.

Hello Pasi,
JDBC-RFC Synchronous Scenario with out BPM,
Go through this links...
JDBC Sync - RFC Sync Scenario without BPM
File - RFC - File without a BPM - Possible from SP 19.
JDBC-RFC-File
Re: jdbc-rfc synchronous
/people/yining.mao/blog/2006/09/13/tips-and-tutorial-for-sender-jdbc-adapter
/people/siva.maranani/blog/2005/09/16/xi-how-to-on-jdbc-receiver-response
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
http://help.sap.com/saphelp_nw04s/helpdata/en/22/b4d13b633f7748b4d34f3191529946/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/22/b4d13b633f7748b4d34f3191529946/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10
JDBC-RFC Scnario mapping problem
Thanks,
Satya Kumar
JDBC---RFC will Support Sync?????????

Error in jbosscmp-jdbc.xml : datasource-mapping Pointbase not found

Hi I'm having problems deploying my EJBs using the Pointbase Database.
This is what I'm working with:
standardjbosscmp-jdbc.xml:
<jbosscmp-jdbc>
   <defaults>
      <datasource>java:/PointbaseDS</datasource>
      <datasource-mapping>Pointbase</datasource-mapping>pointbase-ds.xml:
<datasources>
     <local-tx-datasource>
          <jndi-name>PointbaseDS</jndi-name>
<connection-url>jdbc:pointbase:server://localhost:19092/sample</connection-url>
          <driver-class>com.pointbase.jdbc.jdbcUniversalDriver</driver-class>
          <user-name>jboss</user-name>
          <password>password</password>
     </local-tx-datasource>
</datasources>jbosscmp-jdbc.xml:
<jbosscmp-jdbc>
     <defaults>
          <datasource>java:/PointbaseDS</datasource>
          <datasource-mapping>Pointbase</datasource-mapping>
     </defaults>I keep getting the error message:
org.jboss.deployment.DeploymentException: Error in jbosscmp-jdbc.xml : datasource-mapping Pointbase not found
Any ideas why?
Thanks.

By the way I'm using JBoss server.

JDBC-RFC no errors at XI BOX still records were not update at Target system

hi
am doing jdbc to rfc scenario
tested rfc at target R/3 and its working fine,but records were not being updated in jdbc-rfc scenario.
i can see the audit log as success but no record is inserted at the target system
think problem is at FM.
please look at my FM code.
FUNCTION zscp_fm_inb_task_act_eff_updat .
""Local Interface:
*" TABLES
*"      IT_TASK_DATA STRUCTURE ZSCP_S_TASK_EFFORT
DATA : v_taskguid TYPE bapi_ts_guid-task_guid,
         is_task TYPE bapi_ts_task,
         is_task_upd TYPE bapi_ts_task_upd,
         is_return TYPE TABLE OF bapiret2 WITH HEADER LINE.
*DATA : BEGIN OF it_data OCCURS 0,
        project TYPE zspr_project_id,
        task_id TYPE cgpl_entity-external_id,
        act_work TYPE dpr_tv_act_work,
        guid TYPE dpr_task-guid,
      END OF it_data.
DATA : BEGIN OF it_task_eff OCCURS 0,
           project TYPE zspr_project_id,
           guid TYPE dpr_task-guid,
           act_work TYPE dpr_tv_act_work,
         END OF it_task_eff.
DATA : BEGIN OF it_report OCCURS 0,
           msgtype(1),
           project TYPE zspr_project_id,
           task_id(24),
           msg(250),
         END OF it_report.
DATA : l_taskguid TYPE dpr_task-guid.
DATA : v_begintmstamp(20) TYPE c,
         v_endtmstamp(20) TYPE c.
*ranges : r_taskguid for l_taskguid.
DATA : v_tabix TYPE sy-tabix.
DATA : it_dpr_task TYPE STANDARD TABLE OF dpr_task,
         wa_dpr_task TYPE dpr_task.
*data : l_taskguid type BAPI_TS_GUID-TASK_GUID.
DATA : flg_no_flg TYPE c.
DATA : l_task(24),
         flg_error TYPE c.
DATA : l_taskdetail TYPE bapi_ts_task_detail,
         l_retdetail TYPE STANDARD TABLE OF bapiret2 WITH HEADER LINE.
DATA : v_count TYPE i.
DATA curr_date TYPE sy-datum.
DATA curr_time TYPE sy-uzeit.
CONCATENATE sy-datum sy-uzeit INTO v_begintmstamp.
DELETE it_data WHERE act_work < 0.
DELETE it_task_data WHERE act_work_effort < 0.
IF it_task_data IS NOT INITIAL.
LOOP AT it_task_data.
   v_tabix = sy-tabix.
   CALL FUNCTION 'CONVERSION_EXIT_DPRCE_INPUT'
     EXPORTING
       input = it_task_data-task_id
     IMPORTING
       output = it_task_eff-guid.
   it_task_eff-guid = it_task_data-task_id.
   it_task_eff-project = it_task_data-project_id.
   it_task_eff-act_work = it_task_data-act_work_effort * 60 * 60.
   MODIFY it_data INDEX v_tabix.
   APPEND it_task_eff.
   CLEAR: it_task_eff, it_task_data.
ENDLOOP.
    LOOP AT it_task_data.
      it_task_data-act_work_effort = it_task_data-act_work_effort * 60 * 60.
      MODIFY it_task_data.
      CLEAR it_task_data.
    ENDLOOP.
    SELECT *
        FROM dpr_task
        INTO TABLE it_dpr_task
        FOR ALL ENTRIES IN it_task_data
        WHERE guid = it_task_data-guid.
*Begin Commented by Aparna/25/01/2007 so that all the tasks are updated irrespective the planned efforts are filled or not.
       and
            work_effort > 0.
*End
IF sy-subrc <> 0.
   MESSAGE e000 WITH 'No data selected to update'.
ENDIF.
    IF sy-subrc = 0.
      curr_date = sy-datum.
      curr_time = sy-uzeit.
      LOOP AT it_dpr_task INTO wa_dpr_task.
        CLEAR it_task_eff.
        READ TABLE it_task_data WITH KEY guid = wa_dpr_task-guid.
        IF sy-subrc = 0.
          wa_dpr_task-act_work_effort = it_task_data-act_work_effort.
          wa_dpr_task-act_work_unit = 'S'.
          wa_dpr_task-zzupdated_date = curr_date.
          wa_dpr_task-zzupdated_time = curr_time.
          CLEAR wa_dpr_task-flg_man_rem_work.
          MODIFY it_dpr_task FROM wa_dpr_task TRANSPORTING act_work_effort act_work_unit flg_man_rem_work zzupdated_date zzupdated_time.
        ENDIF.
        CLEAR wa_dpr_task.
      ENDLOOP.
      DESCRIBE TABLE it_dpr_task LINES v_count.
    ENDIF.
ENDIF.
IF it_dpr_task IS NOT INITIAL.
*{17Sep2007 Refresh all tasks before updating the efforts
    UPDATE dpr_task SET act_work_effort = 0
    WHERE version_number EQ space.
*}17Sep2007 Refresh all tasks before updating the efforts
    UPDATE dpr_task FROM TABLE it_dpr_task.
ENDIF.
ENDFUNCTION.

Not exactly an ABAPer but I dont see a commit work in the FM. Maybe this is an issue
Regards
Bhavesh

PI Mapping problem - Repeating target nodes

Hello PI buddies!
My PI mapping problem is as follows:
I have a source IDoc which I wish to map to a JDBC Message Type.
In the Idoc I have 2 repeating sections that I wish to combine to create a new node in the target for each combination of the 2 repeating sections. The source and desired target message structures are pasted below. In summary for every combination of "sales_org" and "relationship" I want to create an "Access" node. In my example there are 2 "sales_org" and 5 "relationship". I would therefore like to generate 10 "Access" nodes.
I want to achieve this if possible using PI mapping and its standard functions. Please help!
SOURCE MESSAGE TYPE:
<?xml version="1.0" encoding="UTF-8" ?>
<Z_CRMXIF_PARTNER_SAVE_M01>
<IDOC BEGIN="1">
<EDI_DC40 SEGMENT="1">
   <TABNAM>EDI_DC40</TABNAM>
</EDI_DC40>
<E101CRMXIF_PARTNER_COMPLEX SEGMENT="1">
   <APPL_SNAME>CRMXIF_PARTNER_COMPLEX</APPL_SNAME>
   <E101CRMXIF_PARTNER_HEADER SEGMENT="1">
   </E101CRMXIF_PARTNER_HEADER>
   <E101BUS_EI_CENTRAL_DATA SEGMENT="1">
    <E101BUS_EI_ROLES SEGMENT="1">
     <APPL_SNAME>BUS_EI_ROLES</APPL_SNAME>
     <CURRENT_STATE>X</CURRENT_STATE>
     <E101BUS_EI_BUPA_ROLES SEGMENT="1">
      <APPL_SNAME>BUS_EI_BUPA_ROLES</APPL_SNAME>
      <DATA_KEY>ZBUP02</DATA_KEY>
     </E101BUS_EI_BUPA_ROLES>
     <E101BUS_EI_BUPA_ROLES SEGMENT="1">
      <APPL_SNAME>BUS_EI_BUPA_ROLES</APPL_SNAME>
      <DATA_KEY>ZCRM01</DATA_KEY>
     </E101BUS_EI_BUPA_ROLES>
     <E101BUS_EI_BUPA_ROLES SEGMENT="1">
      <APPL_SNAME>BUS_EI_BUPA_ROLES</APPL_SNAME>
      <DATA_KEY>ZCRM02</DATA_KEY>
     </E101BUS_EI_BUPA_ROLES>
     <E101BUS_EI_BUPA_ROLES SEGMENT="1">
      <APPL_SNAME>BUS_EI_BUPA_ROLES</APPL_SNAME>
      <DATA_KEY>ZCRM03</DATA_KEY>
     </E101BUS_EI_BUPA_ROLES>
     <E101BUS_EI_BUPA_ROLES SEGMENT="1">
      <APPL_SNAME>BUS_EI_BUPA_ROLES</APPL_SNAME>
      <DATA_KEY>ZCRM04</DATA_KEY>
     </E101BUS_EI_BUPA_ROLES>
    </E101BUS_EI_ROLES>
   </E101BUS_EI_CENTRAL_DATA>
   <E101CRMT_BUS_EI_DATA SEGMENT="1">
    <Z101RMT_BUS_EI_R3_SALESAREA SEGMENT="1">
     <APPL_SNAME>ZCRMT_BUS_EI_R3_SALESAREA</APPL_SNAME>
     <Z101ZCRMT_BUS_R3_SALES_AREA SEGMENT="1">
      <APPL_SNAME>ZCRMT_BUS_R3_SALES_AREA</APPL_SNAME>
      <ZZSALES_ORG>1000</ZZSALES_ORG>
      <ZZCHANNEL>01</ZZCHANNEL>
      <ZZDIVISION>00</ZZDIVISION>
     </Z101ZCRMT_BUS_R3_SALES_AREA>
     <Z101ZCRMT_BUS_R3_SALES_AREA SEGMENT="1">
      <APPL_SNAME>ZCRMT_BUS_R3_SALES_AREA</APPL_SNAME>
      <ZZSALES_ORG>2000</ZZSALES_ORG>
      <ZZCHANNEL>01</ZZCHANNEL>
      <ZZDIVISION>00</ZZDIVISION>
     </Z101ZCRMT_BUS_R3_SALES_AREA>
    </Z101RMT_BUS_EI_R3_SALESAREA>
   </E101CRMT_BUS_EI_DATA>
</E101CRMXIF_PARTNER_COMPLEX>
</IDOC>
</Z_CRMXIF_PARTNER_SAVE_M01>
DESIRED TARGET MESSAGE TYPE:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_CTX001_JDBC_In xmlns:ns0="http://mycompany.co.uk/pi/CTXIN001">
<SQLStatement1>
<dbTable Action="INSERT">
   <Table>customer_relationship</Table>
   <Access>
    <sales_org>1000</sales_org>
    <dist_channel>01</dist_channel>
    <division>00</division>
    <relationship>ZBUP02</relationship>
   </Access>
   <Access>
    <sales_org>2000</sales_org>
    <dist_channel>01</dist_channel>
    <division>00</division>
    <relationship>ZBUP02</relationship>
   </Access>
   <Access>
    <sales_org>1000</sales_org>
    <dist_channel>01</dist_channel>
    <division>00</division>
    <relationship>ZCRM01</relationship>
   </Access>
   <Access>
    <sales_org>2000</sales_org>
    <dist_channel>01</dist_channel>
    <division>00</division>
    <relationship>ZCRM01</relationship>
   </Access>
   <Access>
    <sales_org>1000</sales_org>
    <dist_channel>01</dist_channel>
    <division>00</division>
    <relationship>ZCRM02</relationship>
   </Access>
   <Access>
    <sales_org>2000</sales_org>
    <dist_channel>01</dist_channel>
    <division>00</division>
    <relationship>ZCRM02</relationship>
   </Access>
   <Access>
    <sales_org>1000</sales_org>
    <dist_channel>01</dist_channel>
    <division>00</division>
    <relationship>ZCRM03</relationship>
   </Access>
   <Access>
    <sales_org>2000</sales_org>
    <dist_channel>01</dist_channel>
    <division>00</division>
    <relationship>ZCRM03</relationship>
   </Access>
   <Access>
    <sales_org>1000</sales_org>
    <dist_channel>01</dist_channel>
    <division>00</division>
    <relationship>ZCRM04</relationship>
   </Access>
   <Access>
    <sales_org>2000</sales_org>
    <dist_channel>01</dist_channel>
    <division>00</division>
    <relationship>ZCRM04</relationship>
   </Access>
</dbTable>
</SQLStatement1>
</ns0:MT_CTX001_JDBC_In>
Edited by: Jim Kendall on Apr 22, 2010 12:48 PM
Edited by: Jim Kendall on Apr 22, 2010 12:50 PM

SOURCE MESSAGE TYPE:
<?xml version="1.0" encoding="UTF-8" ?>
<Z_CRMXIF_PARTNER_SAVE_M01>
<IDOC BEGIN="1">
<EDI_DC40 SEGMENT="1">
   <TABNAM>EDI_DC40</TABNAM>
</EDI_DC40>
<E101CRMXIF_PARTNER_COMPLEX SEGMENT="1">
   <APPL_SNAME>CRMXIF_PARTNER_COMPLEX</APPL_SNAME>
   <E101CRMXIF_PARTNER_HEADER SEGMENT="1">
   </E101CRMXIF_PARTNER_HEADER>
   <E101BUS_EI_CENTRAL_DATA SEGMENT="1">
    <E101BUS_EI_ROLES SEGMENT="1">
     <APPL_SNAME>BUS_EI_ROLES</APPL_SNAME>
     <CURRENT_STATE>X</CURRENT_STATE>
     <E101BUS_EI_BUPA_ROLES SEGMENT="1">
      <APPL_SNAME>BUS_EI_BUPA_ROLES</APPL_SNAME>
      <DATA_KEY>ZBUP02</DATA_KEY>
     </E101BUS_EI_BUPA_ROLES>
     <E101BUS_EI_BUPA_ROLES SEGMENT="1">
      <APPL_SNAME>BUS_EI_BUPA_ROLES</APPL_SNAME>
      <DATA_KEY>ZCRM01</DATA_KEY>
     </E101BUS_EI_BUPA_ROLES>
     <E101BUS_EI_BUPA_ROLES SEGMENT="1">
      <APPL_SNAME>BUS_EI_BUPA_ROLES</APPL_SNAME>
      <DATA_KEY>ZCRM02</DATA_KEY>
     </E101BUS_EI_BUPA_ROLES>
     <E101BUS_EI_BUPA_ROLES SEGMENT="1">
      <APPL_SNAME>BUS_EI_BUPA_ROLES</APPL_SNAME>
      <DATA_KEY>ZCRM03</DATA_KEY>
     </E101BUS_EI_BUPA_ROLES>
     <E101BUS_EI_BUPA_ROLES SEGMENT="1">
      <APPL_SNAME>BUS_EI_BUPA_ROLES</APPL_SNAME>
      <DATA_KEY>ZCRM04</DATA_KEY>
     </E101BUS_EI_BUPA_ROLES>
    </E101BUS_EI_ROLES>
   </E101BUS_EI_CENTRAL_DATA>
   <E101CRMT_BUS_EI_DATA SEGMENT="1">
    <Z101RMT_BUS_EI_R3_SALESAREA SEGMENT="1">
     <APPL_SNAME>ZCRMT_BUS_EI_R3_SALESAREA</APPL_SNAME>
     <Z101ZCRMT_BUS_R3_SALES_AREA SEGMENT="1">
      <APPL_SNAME>ZCRMT_BUS_R3_SALES_AREA</APPL_SNAME>
      <ZZSALES_ORG>1000</ZZSALES_ORG>
      <ZZCHANNEL>01</ZZCHANNEL>
      <ZZDIVISION>00</ZZDIVISION>
     </Z101ZCRMT_BUS_R3_SALES_AREA>
     <Z101ZCRMT_BUS_R3_SALES_AREA SEGMENT="1">
      <APPL_SNAME>ZCRMT_BUS_R3_SALES_AREA</APPL_SNAME>
      <ZZSALES_ORG>2000</ZZSALES_ORG>
      <ZZCHANNEL>01</ZZCHANNEL>
      <ZZDIVISION>00</ZZDIVISION>
     </Z101ZCRMT_BUS_R3_SALES_AREA>
    </Z101RMT_BUS_EI_R3_SALESAREA>
   </E101CRMT_BUS_EI_DATA>
</E101CRMXIF_PARTNER_COMPLEX>
</IDOC>
</Z_CRMXIF_PARTNER_SAVE_M01>
DESIRED TARGET MESSAGE TYPE:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_CTX001_JDBC_In xmlns:ns0="http://mycompany.co.uk/pi/CTXIN001">
<SQLStatement1>
<dbTable Action="INSERT">
   <Table>customer_relationship</Table>
   <Access>
    <sales_org>1000</sales_org>
    <dist_channel>01</dist_channel>
    <division>00</division>
    <relationship>ZBUP02</relationship>
   </Access>
   <Access>
    <sales_org>2000</sales_org>
    <dist_channel>01</dist_channel>
    <division>00</division>
    <relationship>ZBUP02</relationship>
   </Access>
   <Access>
    <sales_org>1000</sales_org>
    <dist_channel>01</dist_channel>
    <division>00</division>
    <relationship>ZCRM01</relationship>
   </Access>
   <Access>
    <sales_org>2000</sales_org>
    <dist_channel>01</dist_channel>
    <division>00</division>
    <relationship>ZCRM01</relationship>
   </Access>
   <Access>
    <sales_org>1000</sales_org>
    <dist_channel>01</dist_channel>
    <division>00</division>
    <relationship>ZCRM02</relationship>
   </Access>
   <Access>
    <sales_org>2000</sales_org>
    <dist_channel>01</dist_channel>
    <division>00</division>
    <relationship>ZCRM02</relationship>
   </Access>
   <Access>
    <sales_org>1000</sales_org>
    <dist_channel>01</dist_channel>
    <division>00</division>
    <relationship>ZCRM03</relationship>
   </Access>
   <Access>
    <sales_org>2000</sales_org>
    <dist_channel>01</dist_channel>
    <division>00</division>
    <relationship>ZCRM03</relationship>
   </Access>
   <Access>
    <sales_org>1000</sales_org>
    <dist_channel>01</dist_channel>
    <division>00</division>
    <relationship>ZCRM04</relationship>
   </Access>
   <Access>
    <sales_org>2000</sales_org>
    <dist_channel>01</dist_channel>
    <division>00</division>
    <relationship>ZCRM04</relationship>
   </Access>
</dbTable>
</SQLStatement1>
</ns0:MT_CTX001_JDBC_In>

What are all the advantages of JDBC, RFC, WebService Lookups

Hi Friends,
Please tell me advantages and Disadvantages of JDBC, RFC, Webservice Lookups.
Thanks in Advancs.

Example: PI 7.1 comes with JDBC and RFC Lookup. During mapping we might have requirement to do validation or create logic based on the reference values in the table or SAP backend. In this standpoint, we do JDBC and RFC Lookup. Earlier, we used to do coding in UDF or java mapping to achieve this. Now, we have it as a lookup graphical function.
Webservice Lookup is again the same idea. but we dont have lookup graphical function. We still need to do UDF coding to achieve this.
http://help.sap.com/saphelp_nwpi71/helpdata/en/44/749dd812dd3676e10000000a114a6b/content.htm
/people/jin.shin/blog/2008/02/15/sap-pi-71-mapping-enhancements-series-graphical-support-for-jdbc-and-rfc-lookups
Disadvantage:
If your soap message is larger size, dont do webservice lookup in UDF coding. It has maintanence issues.
Parameterized mapping along with Integrated configuration is not currently possibe both in PI 7.1 and EHP1.

Mapping problem with Wireless Keyboard and Japanese iPhone

Hi everyone:
This seems to be a slightly obscure question -- at least, I can't find a ready answer for it with the search terms I've tried, possibly because most people don't use this particular accessory with the iPhone.
I have an iPhone 4 that I bought from and use on Softbank, the carrier in Japan, where I live. While visiting the United States recently, I bought an Apple Wireless Keyboard from an Apple retailer. I wanted to carry it with me for use with my iPhone, so I would reliably have a convenient way to access the Internet without being confined to the touchscreen keyboard. (I live in a rural area where WiFi spots are uncommon, but my iPhone's access to Softbank's data network is fairly good and consistent.)
However, to my frustration, I can't use the keyboard due to a mapping problem. The Bluetooth connection is fine -- the iPhone can discover the keyboard. However, the mapping is off: typing "Q" gets me "A," typing "Z" gets me "W", numbers and punctuation are off, etc. The key point: This is NOT a problem with the International Keyboard settings (under the Settings -> General -> Keyboard -> International Keyboards menu). I have the Keyboard setting set to QWERTY, which is the layout of the Apple keyboard; I have tried all the other possibilities, just in case. None of them work. Setting the Keyboard setting to QWERTY does not make the external QWERTY keyboard map correctly.
The rather ironic addendum is this: While on a recent trip to Tokyo, I visited the Apple store in Shibuya and, after concluding the main business of my visit (discussing my MacBook's battery problems with an English-speaking staffer), I took out my iPhone and keyboard and asked him about my mapping problem. He started with the Keyboard menu, tried the same things I had tried, realized they weren't working, and puzzled over the problem for a while. Then he did this: He hit a key combination (I believe) that brought up a menu on the iPhone's screen. "Ah, there's your problem," he said, and selected a new setting. The problem was instantly fixed.
To my chagrin, however, I neglected to write down what "Ken" had done to fix the problem. Argh... I was looking at the iPhone upside-down; I'd already taken up more than half an hour; people were waiting, and I guess, being used to living in the countryside now, that I'm not used to Shibuya crowds any more. Anyway, I didn't take careful notes or ask him to walk me through it, and now I cannot recall or repeat what he did. And I still can't use my keyboard!
Any ideas or advice, anyone? How did "Ken" fix my problem, and how can I repeat it? Much, much appreciated, in advance.

THAT'S IT. Sir, you have solved my problem. Thank you!!
And I feel a little silly; this will doubtless seem to an expert as if it should have been obvious all along. But isn't that always the way in hindsight?
Here's what happened: The key combination I was trying to remember was "Apple/command + space on the hardware keyboard," as you just said above. The "menu" it brings up is, apparently, a list of keyboards. I take it that this list is the same as the list of the "virtual" keyboards on the iPhone? I have never had more than one external keyboard -- the Apple Wireless -- but I do have several keyboards active virtually, as the iPhone in Japan seems to come with both the "Nihongo Ten-key" and the "Nihongo Romaji" keyboards active, and I added several other languages as well.
When I hit "Apple/command + space," this list comes up on the iPhone's touchscreen. Highlighted and checked at the top is "English," just as if it had been selected all along. But nonetheless, when I first turn on and pair my keyboard with the iPhone, I need to perform this key-combination action, as if to "reselect" English, and then the keyboard promptly starts working properly as QWERTY. I can only assume that one of the others had been default-selected before -- presumably one of the Nihongo ones? -- and that this was causing the interference.
Thank you again! You have made me and my wireless keyboard very happy.

Problems with ViaVoice under Leopard, especially key mapping problems

ViaVoice's behavior has changed considerably under Leopard. First I will discuss the key mapping problem, since I'm eagerly looking for an answer to this problem. At the end of this post, I will voice some of the other problems I've experienced for those who may be interested. The key mapping problem may be specific to the fact that I use a foreign keyboard with a US version of ViaVoice.
INTRO:
I have used ViaVoice on my Mac for years, more or less without problems (ViaVoice's bugginess is notorious).
Those who know ViaVoice will know that one has two general options for dictation. One can dictate into ViaVoice's so-called SpeakPad, which allows special formatting, editing and dictation error correction within the dictated text, or one can dictate into "external" software such as Microsoft Word, in which case ViaVoice just sends a string of characters to that software. SpeakPad appears to make strong use of the operating system's built-in functionality for character formatting, document formatting, etc.
*MY PROBLEM*
I have a German keyboard on my PowerBook, yet dictate in US English. When I dictated into SpeakPad under Tiger, all characters appeared correctly. However, when I dictated into Microsoft Word using Tiger, I had to switch the keyboard mapping from German to US to get all characters (that means including the characters that are located at different positions on a German keyboard than they are on a US keyboard such as y, z, apostrophes and parentheses) to appear correctly.
Under Leopard, things have changed. Now it doesn't matter whether I dictate into SpeakPad or Word; the results are the same and many characters do not appear correctly.
If set to a German keyboard, y and z appear as expected. To name a few irregularities:
"(" appears as ")"
")" appears as "="
apostrophes appear as "#" and
";" appears as ","
If set to a US keyboard, y and z are interchanged. "(" and ")" appear as expected. Apostrophes appear as "\" and ";" appears as ","
By comparison, if typed (as opposed to dictated, as in the examples above) "correctly" (i.e. based on the letters printed on the keyboard) on a German keyboard set to imitate a US keyboard:
y and z are interchanged
apostrophes appear as "|"
"(" appears as "*"
")" appears as "(" and
";" appears as the symbol for "less than"
Since I don't have a US keyboard, I can't say how it would behave if set to imitate a German keyboard, i.e. if there's a correlation to the results I get when I dictate.
Since I was previously able to dictate correctly into SpeakPad by setting the keyboard to "German" and into Word by setting the keyboard to "US," I presume that this is a problem in Leopard, not ViaVoice.
*OTHER PROBLEMS WITH VIAVOICE UNDER LEOPARD*
In addition to the aforementioned key mapping problems (that may be specific to those of us with foreign keyboards), ViaVoice appears to have lost considerable functionality in Leopard. I cannot access SpeakPad's Preferences and the correction window. Moreover, the traffic-light like window buttons have disappeared from the VoiceCenter (although they work if you click where they should be). SetupAssistent appears to function.
I've written to Nuance about these problems, but have little hope that they will invest the time in producing a patch since they haven't released any updates since 2003.

Thrums1,
I've never had to "register" ViaVoice after updating the system. I thus suspect you haven't fully followed my above, three-step advice (particularly step 3).
1) Reinstall ViaVoice from CD.
2) Update to the latest version (using the patch downloadable from Nuance's website).
3) Replace the “temp” and “users” folders (in the "ViaVoice" folder at the upper level of your home directory) by a previous copy thereof. When I say previous copy, I mean a copy from when ViaVoice was still working properly, e.g. a copy from when it was running under Tiger.
As I said, I've gotten ViaVoice to survive several system updates by following the above steps. To my knowledge, the last step is critical since it saves you from having to reconfigure ViaVoice under the new operating system (in this case Leopard). I suspect that ViaVoice is crashing on your system because it's trying to start some module of the SetUpAssistant that is incompatible with Leopard (as many are). If you instead use old copies of the "temp" and "users" folders (from the previous system), then ViaVoice doesn't have to go through the initial "registration" process; ViaVoice doesn't need the SetUpAssistant; and all is (more or less) fine.
Good luck!
BTW, to my knowledge, Dictate only runs on Intel Macs. It thus won't run on a G4 iBook, just as it won't run on my PowerBook G4.

Mapping problem with compressed key update record

Hi, could you please advise?
I'm getting the following problem:
About a week ago replicat abened with "Error in mapping" error. I found in discard file some record looking like:
filed1 = NULL
field2 =
field3 =
field4 =
field5 =
datefield = -04-09 00:00:00
field6 =
field8 =
field9 = NULL
field10 =
Where filed9 = @GETENV("GGHEADER", "COMMITTIMESTAM"), field10 = = @GETENV("GGHEADER", "COMMITTIMESTAM"), others are table fields mapped by USEDEFAULTS
So I got Mapping problem with compressed key update record at 2012-06-01 15:44
I guess I need to mention that extract failed in 5 minuts before it with: VAM function VAMRead returned unexpected result: error 600 - VAM Client Report <[CFileInfo::Read] Timeout expired after 10 retries with 1000 ms delay, waiting to read transaction log or backup files. To increase the number of retries, use SETENV (GGS_CacheRetryCount = n) in Extract parameter file. To control retry delay time, use SETENV (GGS_CacheRetryDelay = n). handle: 0000000000000398 ReadFile GetLastError:997 Wait GetLastError:997>.
I don't know if it has ther same source as data corruption, could you tell me if it is?
Well, I created new extract, starting 2012-06-01 15:30 to check if there was something with extract at the time, but got the same error.
If I run extract beging at 15:52 it starts and works.
But well, I got another one today. Data didn't look that bad, but yet one column came with null value:( And I'm using it as a key column, so I got Mapping problem with compressed key update record again:(
I'm replicating from SQL Server 2008 to Oracle 11g.
I'm actually using NOCOMPRESSUPDATES in Extract.
CDC is enabled for all tables replicated. The only thing is that it is enabled not by ADD TRANDATA command, but by SQL Server sys.sp_cdc_enable_table, does it matter?
Could you please advise why does it happen?

Well, the problem begins somewhere in extract or before extract, may be in transaction log, I don't know:(
Here are extract parameters:
EXTRACT ETCHECK
TRANLOGOPTIONS MANAGESECONDARYTRUNCATIONPOINT
SOURCEDB TEST, USERID **, PASSWORD *****
exttrail ./dirdat/ec
NOCOMPRESSUPDATES
NOCOMPRESSDELETES
TABLE tst.table1, COLS (field1, field2, field3, field4, field5, field6, field7, field8 );
TABLE tst.table2, COLS (field1, field2, field3, field4 );
Data pump:
EXTRACT DTCHECK
SOURCEDB TEST, USERID **, PASSWORD *****
RMTHOST ***, MGRPORT 7809
RMTTRAIL ./dirdat/dc
TABLE tst.table1;
TABLE tst.table2;
Replicat:
REPLICAT rtcheck
USERID tst, PASSWORD ***
DISCARDFILE ./dirrpt/rtcheck.txt, PURGE
SOURCEDEFS ./dirdef/sourcei.def
HANDLECOLLISIONS
UPDATEDELETES
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
MAP dbo.TPROCPERIODCONFIRMSTAV, TARGET R_019_000001.TPROCPERIODCONFIRMSTAV, COLMAP (USEDEFAULTS , field5 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed6= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (filed1, field2, field3);
Rpt file for replicat:
Oracle GoldenGate Delivery for Oracle
Version 11.1.1.1 OGGCORE_11.1.1_PLATFORMS_110421.2040
Windows x64 (optimized), Oracle 11g on Apr 22 2011 00:34:07
Copyright (C) 1995, 2011, Oracle and/or its affiliates. All rights reserved.
Starting at 2012-06-05 12:49:38
Operating System Version:
Microsoft Windows Server 2008 R2 , on x64
Version 6.1 (Build 7601: Service Pack 1)
Process id: 2264
Description:
** Running with the following parameters **
REPLICAT rtcheck
USERID tst, PASSWORD ***
DISCARDFILE ./dirrpt/rtcheck.txt, PURGE
SOURCEDEFS ./dirdef/sourcei.def
HANDLECOLLISIONS
UPDATEDELETES
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
MAP dbo.TPROCPERIODCONFIRMSTAV, TARGET R_019_000001.TPROCPERIODCONFIRMSTAV, COLMAP (USEDEFAULTS , field5 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed6= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (filed1, field2, field3);
CACHEMGR virtual memory values (may have been adjusted)
CACHEBUFFERSIZE: 64K
CACHESIZE: 512M
CACHEBUFFERSIZE (soft max): 4M
CACHEPAGEOUTSIZE (normal): 4M
PROCESS VM AVAIL FROM OS (min): 1G
CACHESIZEMAX (strict force to disk): 881M
Database Version:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
Database Language and Character Set:
NLS_LANG = "AMERICAN_AMERICA.CL8MSWIN1251"
NLS_LANGUAGE = "AMERICAN"
NLS_TERRITORY = "AMERICA"
NLS_CHARACTERSET = "CL8MSWIN1251"
For further information on character set settings, please refer to user manual.
** Run Time Messages **
Opened trail file ./dirdat/dc000000 at 2012-06-05 12:49:39
2012-06-05 12:58:14 INFO OGG-01020 Processed extract process RESTART_ABEND record at seq 0, rba 925 (aborted 0 records).
MAP resolved (entry tst.table1):
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
2012-06-05 12:58:14 WARNING OGG-00869 No unique key is defined for table table1. All viable columns will be used to represent the key, but may not guarantee uniqueness. KEYCOLS may be used to define the key.
Using the following default columns with matching names:
field1=field1, field2=field2, field3=field3, field4=field4, field5=field5, field6=field6, field7=field7, field8=field8
Using the following key columns for target table R_019_000001.TCALCULATE: field3.
2012-06-05 12:58:14 WARNING OGG-01431 Aborted grouped transaction on 'tst.table1', Mapping error.
2012-06-05 12:58:14 WARNING OGG-01003 Repositioning to rba 987 in seqno 0.
2012-06-05 12:58:14 WARNING OGG-01151 Error mapping from tst.table1 to tst.table1.
2012-06-05 12:58:14 WARNING OGG-01003 Repositioning to rba 987 in seqno 0.
Source Context :
SourceModule : [er.main]
SourceID : [er/rep.c]
SourceFunction : [take_rep_err_action]
SourceLine : [16064]
ThreadBacktrace : [8] elements
: [C:\App\OGG\replicat.exe(ERCALLBACK+0x143034) [0x00000001402192B4]]
: [C:\App\OGG\replicat.exe(ERCALLBACK+0x11dd44) [0x00000001401F3FC4]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x000000014009F102]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x00000001400B29CC]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x00000001400B8887]]
: [C:\App\OGG\replicat.exe(releaseCProcessManagerInstance+0x25250) [0x000000014028F200]]
: [C:\Windows\system32\kernel32.dll(BaseThreadInitThunk+0xd) [0x000000007720652D]]
: [C:\Windows\SYSTEM32\ntdll.dll(RtlUserThreadStart+0x21) [0x000000007733C521]]
2012-06-05 12:58:14 ERROR OGG-01296 Error mapping from tst.table1 to tst.table1.
* ** Run Time Statistics ** *
Last record for the last committed transaction is the following:
Trail name : ./dirdat/dc000000
Hdr-Ind : E (x45) Partition : . (x04)
UndoFlag : . (x00) BeforeAfter: A (x41)
RecLength : 249 (x00f9) IO Time : 2012-06-01 15:48:56.285333
IOType : 115 (x73) OrigNode : 255 (xff)
TransInd : . (x03) FormatType : R (x52)
SyskeyLen : 0 (x00) Incomplete : . (x00)
AuditRBA : 44 AuditPos : 71176199289771
Continued : N (x00) RecCount : 1 (x01)
2012-06-01 15:48:56.285333 GGSKeyFieldComp Len 249 RBA 987
Name: DBO.TCALCULATE
Reading ./dirdat/dc000000, current RBA 987, 0 records
Report at 2012-06-05 12:58:14 (activity since 2012-06-05 12:58:14)
From Table tst.table1 to tst.table1:
# inserts: 0
# updates: 0
# deletes: 0
# discards: 1
Last log location read:
FILE: ./dirdat/dc000000
SEQNO: 0
RBA: 987
TIMESTAMP: 2012-06-01 15:48:56.285333
EOF: NO
READERR: 0
2012-06-05 12:58:14 ERROR OGG-01668 PROCESS ABENDING.
Discard file:
Oracle GoldenGate Delivery for Oracle process started, group RTCHECK discard file opened: 2012-06-05 12:49:39
Key column filed3 (0) is missing from update on table tst.table1
Missing 1 key columns in update for table tst.table1.
Current time: 2012-06-05 12:58:14
Discarded record from action ABEND on error 0
Aborting transaction on ./dirdat/dc beginning at seqno 0 rba 987
error at seqno 0 rba 987
Problem replicating tst.table1 to tst.table1
Mapping problem with compressed key update record (target format)...
filed1 = NULL
field2 =
field3 =
field4 =
field5 =
datefield = -04-09 00:00:00
field6 =
field8 =
field9 = NULL
field10 =
Process Abending : 2012-06-05 12:58:14

Mapping problem with compressed key update record (target format)...

Hi Guys,
Getting below error while replication from Source to target. Source table is having NOT NULL Column, but on target replicat process giving error about some NULL value ??
How to overcome this issue, any idea...
2011-08-04 10:35:04 INFO OGG-00995 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: REPLICAT RMASTRK starting.
2011-08-04 10:35:05 INFO OGG-00996 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: REPLICAT RMASTRK started.
2011-08-04 10:35:06 WARNING OGG-00869 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: OCI Error ORA-01407: cannot update ("INFRA"."CUST"."CODE") to NULL (status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"DP_ID" = :a3,"EXCHNG_CODE" = :a4,"ORD_QTY" = :a5,"ORD_PRICE" = :a6,"CODE" = :a7,"MKRT_CODE" = :a8,"CHANN>.
2011-08-04 10:35:06 WARNING OGG-01004 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Aborted grouped transaction on 'INFRA.CUST', Database error 1407 (ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL).
2011-08-04 10:35:06 WARNING OGG-01003 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Repositioning to rba 44132192 in seqno 68708.
2011-08-04 10:35:06 *WARNING OGG-01154 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: SQL error 1407 mapping INFRA.CUST to INFRA.CUST OCI Error ORA-01407:* *cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL (status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"DP_ID" = :a3,"EXCHNG_CODE"=:a4,"ORD_QTY"*
*= :a5,"ORD_PRICE" = :a6,"SCRP_CODE" = :a7,"MKRT_CODE" = :a8,"CHANN>.*
2011-08-04 10:35:06 WARNING OGG-01003 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Repositioning to rba 44132192 in seqno 68708.
2011-08-04 10:35:06 ERROR OGG-01296 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Error mapping from INFRA.CUST to INFRA.CUST.
2011-08-04 10:35:06 ERROR OGG-01668 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: PROCESS ABENDING.
Oracle GoldenGate Delivery for Oracle process started, group RMASTRK discard file opened: 2011-08-04 10:35:05
Current time: 2011-08-04 10:35:06
Discarded record from action ABEND on error 1407
OCI Error ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL
(status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"MKRT_CODE" = :a8,"CHANN>
Aborting transaction on ./dirdat/pm beginning at seqno 68708 rba 44132192
error at seqno 68708 rba 44132192
Problem replicating INFRA.CUST to INFRA.CUST
*Mapping problem with compressed key update record (target format)...*
ORD_QTY = 500
ORD_PRICE = 37430
SCRP_CODE =
MKRT_CODE = N
Oracle GoldenGate Delivery for Oracle process started, group RMASTRK discard file opened: 2011-08-
04 10:35:05
Current time: 2011-08-04 10:35:06
Discarded record from action ABEND on error 1407
OCI Error ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL
(status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"MKRT_CODE" = :a8,"CHANN>
Aborting transaction on ./dirdat/pm beginning at seqno 68708 rba 44132192
error at seqno 68708 rba 44132192
Problem replicating INFRA.CUST to INFRA.CUST
Mapping problem with compressed key update record (target format)...
ORD_QTY = 500
ORD_PRICE = 37430
SCRP_CODE =
MKRT_CODE = N
Any inputs / help would be appreciated.
Regards,
Manish

The SCRP_CODE column has a NOT NULL constraint. The ORA-01407 error is telling you that you cannot update or set a value for this column to null because of the constraint. This has absolutely nothing to do with an index. You can use a marker/sentinel value in lieu of using NULL. For a numeric field, where everything is positive, a negative value (-1) can be decoded as meaning null. For a character field, a code such as NA can represent NULL.
This also has nothing to do (directly) with GoldenGate failing because of this error. The underlying SQL statement will fail everywhere, regardless of the tool or application. It is not a case of failing only in GoldenGate.

Mapping problem - Shaded areas in the wrong place

Hey experts,
I`ve already contacted you on this issue a few days ago. I created a query, which executes a few key figures mapped to the postalcode.
I tried to let me display this query on the web, using the WAD. The shapefiles were uploaded correctly, for the contours of the country and the postalcode areas are displayed accurately.
At the first sight, I thought a performance problem could be the challenge. But I did not find any information on that. On my last post, i received one answer, that I had to adjust the sort order. But that did not bring any results either!
At the moment, it looks more like a mapping problem in the dBase File to me. How can a proper mapping be achieved? I tried to just add a SAPBWKEY column, like it is proposed here: http://help.sap.com/saphelp_nw04/helpdata/en/3b/7c92ec1bed374ee0000800091c1b0e/content.htm.
An extract of my dBase-File schematically looks like this:
0country, 0Postalcod, SAPBWKEY
DE 48900 DE/48900 (for it is a composite attribute)
The mapping seems to work in a rather random way, because the shaded areas are at least displayed somewhere on the map, but not where they supposed to be, e. g. one district of south Germany in the far north and so on.
Did you have any similar issues in the past or any tips for a solution?
Thanks&regards
Marcus

Sorry, I guess this is just a bug in some programs including firefox:
https://bugzilla.mozilla.org/show_bug.cgi?id=314279

Mapping Problem ORDERS Idoc to Edifact

Hi,
I have a mapping problem with the IDOC ORDERS:
I get the IDOC with several E1EDP01. Each E1EDP01 has several E1EDPT1, where i want only the first one (which I get over the TDID value). Each E1EDPT1 has min. 1 E1EDPT2.
Now I have to map each field TDLINE from first two E1EDPT2 of the first E1EDPT1 to the Edifact fields /LIST/S_UNB/S_UNH/G_SSG25/S_LIN/S_IMD[1]/C_C273/D_7008 (from the first E1EDPT2) and, if a second E1EDPT2 exists in /LIST/S_UNB/S_UNH/G_SSG25/S_LIN/S_IMD[1]/C_C273/D_7008_2.
I use following UDF:
//a = TDLINE
//b = Number of entry in the List
int pos =Integer.parseInt(b[0]);
if ( pos < a.length )
result.addValue(a[pos]);
else
result.addValue(ResultList.SUPPRESS);
Unfortunatly, I think becaus of the context problems (not every E1EDPT1 has two E1EDPT2), it's not working. Could somebody help me with this problem?
Thanks in advance
Dominic

Dear Dominic ,
I had same problem when I was trying to do the same thing for FTX segment.
Your UDF is fine but you don't need else condition.
//a = TDLINE
//b = Number of entry in the List
int pos =Integer.parseInt(b[0]);
if ( pos < a.length )
result.addValue(a[pos]);
for C_C273 assigned contant value and
D_7008 assigned TDLINE but change the context to E1EDPT1
and for D_7008_2
TDLINE(context to E1EDPT1 )
====>UDF====>D_7008_2
Contant(=1)
It should work becasue my map is working fine. If not let me know error message.
Thanks
Shubhankar

Mapping problem:from E1EDK14-ORGID to PORDCR102-PUR_GROUP

Mapping problem:from E1EDK14-ORGID to PORDCR102-PUR_GROUP
E1EDK14 occurs 4 times in the source sys:
1   E1EDK14-QUALF = '014'
     E1EDK14-ORGID = 'YP01'      <= purchase organization
2   E1EDK14-QUALF = '009'
     E1EDK14-ORGID = '001'      <= purchase group
3   E1EDK14-QUALF = '013'
     E1EDK14-ORGID = 'NB'      <= document type
4   E1EDK14-QUALF = '011'
     E1EDK14-ORGID = 'C999'      <= company code
I always want to copy "E1EDK14-ORGID = '001'" to PORDCR102-PUR_GROUP.
I have a solution which works but not perfect:
E1EDK14-ORGID=>copyvalue[1]=>PORDCR102-PUR_GROUP
I want to have the perfect mapping as follow:
IF E1EDK14-QUALF = '009'.
E1EDK14-ORGID = '001' => PORDCR102-PUR_GROUP
ENDIF.
I did it in the data flow editor as follow:
/PORDCR102/IDOC/E1PORDCR1/E1BPMEPOHEADER/PUR_GROUP=
ifWithoutElse([keepss=false]stringEquals
(removeContexts(/ORDERS05/IDOC/E1EDK14/QUALF=),
const([value=009])), /ORDERS05/IDOC/E1EDK14/ORGID=)
But the result in the target sys is always 'YP0'(The first E1EDK14-ORGID)
How to solve this problem?
Thanks
ming yu

Hi,
Try like this.
E1EDK14-QUALF   --------
Constant(009) ----------------   EqualsS ---------------
                                                             And(Boolean Function)     ------ IfWithoutElse -- PORDCR102-PUR_GROUP
E1EDK14-ORGID -------                                                      E1EDK14-ORGID ----------------
Constant(001) --------------   EqualsS ------------------
Regards,
P.Venkat

JDBC-RFC Scnario mapping problem

Similar Messages

Maybe you are looking for