Single SQL call for both Report & Chart

Hi everyone,
I am pretty new to APEX and I am loving it :)
I need to create a page with two region (SQL Report & Flash Chart) and both region data will come from identical SQL statement.
Could I make them both get data from a single sql call, instead of making 2 identical sql call for each region?
Thanks before for any help.

Can't think of any practical way to use only one call. Best I can come up with it to create the query as a Shared Component. At least that way your using the identical SQL source.
HTH
Chris

Similar Messages

Package Configuration via SQL Server For a Reporting Queue

The scenario is a reporting queue for a web application. Currently when a user queues a report it stores the parameters in a table by queue ID. When that report is set to run the database creates a dtexec command with all the parameters. We use this
method for transferring the values the user selected to the SSIS packages.
I have used SQL Server package configurations before but they are usually a single table with a distinct ConfigurationFilter column. Is it possible to take the standard table layout for the SQL Server package configuration and add another column, say
QueueID. We send the QueueID to each package at run time and use this value to filter the table to the configuration specific to that report?

Here is a better break down of the current process:
1. A user goes to the web application and selects a report/parameters.
2. This will add data to [QUEUE] and [QUEUE_PARAMETERS] tables associated by the QUEUE_ID
3. The server has a windows service which looks for reports in the [QUEUE] table in pending status and gets the next one available and calls a stored procedure with that QUEUE_ID.
4. The stored procedure puts together a dtexec command through xp_cmdshell which contains all the user parameters from the [QUEUE_PARAMETERS] table.
The purposed process is to replace the self made [QUEUE_PARAMETERS] table with the package configuration table. This means we would only have to send the QUEUE_ID via the dtexec command and not all the other parameters. The problem is that if
I add QUEUE_ID to the package configuration table I am not sure how I would reference a specific QUEUE_ID from the SSIS package configuration dynamically. There does not appear to be an expression that can be applied to the package configuration in SSIS
which means the relationship must make the ConfigurationFilter field unique, even though it is not a primary key.

Where clause in sql query for updateable report

Why is the following not working as source for an updateable report ?
select customer_name from temp_customers
where customer_type = :my_field;
How can I make a filter for an updateable report that is based on a field on my page ?
Greetings Bernd

Howard,
The htmldb_item API package allows you to display column values in a report as HTML form fields. You have a choice of different types of form fields. In your example for instance you get a select list by using the function select_list_from_lov. But by simply placing form fields in an HTML page, you don't specify that those fields are actually supposed to update data in a database. You need an after submit process that is actually performing the update.
You can implement this type of process manually using your own PL/SQL code. Or you can have HTML DB do this for you. If for example you were using the tabular form wizard, you would get an updateable report, including the update process and even including checksum functionality to make sure that you don't overwrite another person's changes (lost update detection).
If you use the wizard, the report form items use the build-in display types. This means you don't have to do your own calls to htmldb_item as part of your query. It is generally advisable to use the build-in types as they are easier to work with and are only rendered for the rows actually shown as opposed to be rendered for the entire result set.
If you do choose to use htmldb_item, you'll have to code your own PL/SQL code to perform the updates and you should also include some logic for lost update detection. The HTML DB documentation provides information on how to manually process data from tabular forms.
Hope this clarifies your question about updateable reports,
Regards,
Marc

Newbie - need help with a SQL query for a bar chart

Hi,
I'm a new user on APEX with no real SQL knowledge and I'm trying to build a dashboard with charts into an existing APEX application. Based on another application, I have come up with the following SQL code:
select null link
, CATEGORY label
, count (decode(PROJECT_STATUS,'1',PROJECT_ID))"Active"
, count (decode(PROJECT_STATUS,'2',PROJECT_ID))"Complete"
, count (decode(PROJECT_STATUS,'3',PROJECT_ID))"On Hold"
, count (decode(PROJECT_STATUS,'4',PROJECT_ID))"Pipeline"
, count (decode(PROJECT_STATUS,'5',PROJECT_ID))"Pending Review"
from GRAPO_PROHEADTRK
where (PROJECT_STATUS='1' or PROJECT_STATUS='2' or PROJECT_STATUS='3' or PROJECT_STATUS='4' or PROJECT_STATUS='5' or PROJECT_STATUS='6')
group by CATEGORY
Order by COUNT(PROJECT_ID) DESC
The code from the other app was:
select null link
, FUNCTIONAL_AREA label
, count (decode(PROJECT_STATUS,'Active',PROJECT_ID))"Active"
, count (decode(PROJECT_STATUS,'Complete',PROJECT_ID))"Complete"
, count (decode(PROJECT_STATUS,'On Hold',PROJECT_ID)) "On Hold"
, count (decode(PROJECT_STATUS,'Recurring',PROJECT_ID))"Recurring"
, count (decode(PROJECT_STATUS,'Pipeline',PROJECT_ID))"Pipeline"
, count (decode(PROJECT_STATUS,'Not Approved',PROJECT_ID))"Not Approved"
from PM_V2
where LOB='S2S' and (FUNCTIONAL_AREA='Accounts Payable' or FUNCTIONAL_AREA='Expense' or FUNCTIONAL_AREA='Procurement' or FUNCTIONAL_AREA='Fixed Assets')
group by FUNCTIONAL_AREA
Order by COUNT(PROJECT_ID) DESC
I'm getting a "Failed to parse SQL query!" error when I try to run validation.
Is this enough info for some assistance? Any help would really be appreciated.
Thanks,
Rachel

Hello,
This is more of an SQL question, rather than specifically APEX-related. It's notable that you say: I'm a new user on APEX with no real SQL knowledgeWhich is fine (we all have to start somewhere, afterall) but it might be worth de-coupling the problem from APEX in the first instance. I'd also strongly recommend either taking a course, reading a book (e.g. http://books.google.co.uk/books?id=r5vbGgz7TFsC&printsec=frontcover&dq=Mastering+Oracle+SQL&hl=en#v=onepage&q=Mastering%20Oracle%20SQL&f=false) or looking for a basic SQL tutorial - it will save you a whole lot of heartache, I promise you. Search the oracle forums for the terms "Basic SQL Tutorial" and you should come up with a bunch of results.
Given that you've copied your query template from another, I would suggest ensuring that the actual query works first of all. Try running it in either:
* SQL Editor
* SQL*Plus
* an IDE like SQL Developer (available free from the OTN: http://www.oracle.com/technetwork/developer-tools/sql-developer/downloads/index.html ) or TOAD or similar.
You may find there are syntax errors associated with the query - it's difficult to tell without looking at your data model.
select null link
, CATEGORY label
, count (decode(PROJECT_STATUS,'1',PROJECT_ID))"Active"
, count (decode(PROJECT_STATUS,'2',PROJECT_ID))"Complete"
, count (decode(PROJECT_STATUS,'3',PROJECT_ID))"On Hold"
, count (decode(PROJECT_STATUS,'4',PROJECT_ID))"Pipeline"
, count (decode(PROJECT_STATUS,'5',PROJECT_ID))"Pending Review"
from GRAPO_PROHEADTRK
where (PROJECT_STATUS='1' or PROJECT_STATUS='2' or PROJECT_STATUS='3' or PROJECT_STATUS='4' or PROJECT_STATUS='5' or PROJECT_STATUS='6')
group by CATEGORYNote that your "order by" clause references a field called "PROJECT_ID", which exists in the old query but you've changed other similar references to "PROJECT_STATUS" - is it possible you've just missed this one? The perils of copy-paste coding I'm afraid...

How to have category labels of 2 charts as 1 common for both the charts

Mudassar
Is there a possibility where in we can have a single data label (category ) for the both charts output as below

Hi Mudassar,
In order to meet your requirement, we can hide the other chart’s label to work around the issue. Please refer to the following steps:
Right-Click the second chart label, select Vertical Axis Properties.
Click Labels in the left pane, select “Hide axis labels” option.
Then, Right-Click the chart area, select Chart Properties.
Click Border in the left, hide the corresponding border of the chart.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Access APEX_APPLICATION.G_F01 in an SQL query for a report

APEX 4.0.2.00.07
I've got a standard report with checkboxes. The SQL is along the lines of:
SELECT APEX_ITEM.CHECKBOX(1,empno,'CHECKED') " ",
       ename,
       job
FROM   empThen I have another report below this, which I want to drive based on the items checked in the first report. I know that the checkbox values will go into the APEX_APPLICATION.G_F01 collection. Normally these are accessed using pl/sql such as:
FOR I in 1..APEX_APPLICATION.G_F01.COUNT LOOP
    DELETE FROM emp WHERE empno = to_number(APEX_APPLICATION.G_F01(i));
END LOOP;But is there any way I can access the collection from the sql for my second report.
i.e. I want my sql to be something like:
SELECT empno, day_of_service
FROM   emp_timesheet
WHERE emp_no in <get access to the collection here>I was hoping that the check box collection would be available from the APEX_COLLECTIONS view, but it doesn't seem to be there.
Thanks,
John

John,
If the goal is to hold onto the checked values for some other processing then you could add them to a collection yourself.
create a process on your page which looks something like this:
This will create your collection if it does not exist or delete everything currently in it if it does exist and then insert your new selections.
DECLARE
   l_col_name varchar2(30) := 'EMP_SELECTED';
BEGIN
    apex_collection.create_or_truncate_collection(l_col_name);
    FOR I in 1..APEX_APPLICATION.G_F01.COUNT LOOP
        apex_collection.add_member(
            l_col_name,
            to_number(APEX_APPLICATION.G_F01(i))
    END LOOP;
END;your second query could look something like this:
SELECT empno, day_of_service
FROM emp_timesheet
WHERE empno in (select C001 empno
                   from apex_collections ac
                  where ac.collection_name = 'EMP_SELECTED')
Edit
some people choose to create a view ontop of certain collection queries which will be reapeated throughout the application so you could also just
create view selected_emps as
select C001 empno
from apex_collections ac
where ac.collection_name = 'EMP_SELECTED'   and your new query would look like:
SELECT empno, day_of_service
FROM emp_timesheet
WHERE empno in (select empno
                   from selected_emps)Cheers,
Tyson Jouglet
Edited by: Tyson Jouglet on Apr 6, 2011 10:37 AM

Newbie - help with a SQL query for a bar chart - Originally posted in APEX

I originally posted this in the APEX forum but someone there suggested this is more of a SQL question. Anyone out there who can provide some assistance?
Hi,
I'm a new user on APEX with no real SQL knowledge and I'm trying to build a dashboard with charts into an existing APEX application. Based on another application, I have come up with the following SQL code:
select null link
, CATEGORY label
, count (decode(PROJECT_STATUS,'1',PROJECT_ID))"Active"
, count (decode(PROJECT_STATUS,'2',PROJECT_ID))"Complete"
, count (decode(PROJECT_STATUS,'3',PROJECT_ID))"On Hold"
, count (decode(PROJECT_STATUS,'4',PROJECT_ID))"Pipeline"
, count (decode(PROJECT_STATUS,'5',PROJECT_ID))"Pending Review"
from GRAPO_PROHEADTRK
where (PROJECT_STATUS='1' or PROJECT_STATUS='2' or PROJECT_STATUS='3' or PROJECT_STATUS='4' or PROJECT_STATUS='5' or PROJECT_STATUS='6')
group by CATEGORY
Order by COUNT(PROJECT_ID) DESC
The code from the other app was:
select null link
, FUNCTIONAL_AREA label
, count (decode(PROJECT_STATUS,'Active',PROJECT_ID))"Active"
, count (decode(PROJECT_STATUS,'Complete',PROJECT_ID))"Complete"
, count (decode(PROJECT_STATUS,'On Hold',PROJECT_ID)) "On Hold"
, count (decode(PROJECT_STATUS,'Recurring',PROJECT_ID))"Recurring"
, count (decode(PROJECT_STATUS,'Pipeline',PROJECT_ID))"Pipeline"
, count (decode(PROJECT_STATUS,'Not Approved',PROJECT_ID))"Not Approved"
from PM_V2
where LOB='S2S' and (FUNCTIONAL_AREA='Accounts Payable' or FUNCTIONAL_AREA='Expense' or FUNCTIONAL_AREA='Procurement' or FUNCTIONAL_AREA='Fixed Assets')
group by FUNCTIONAL_AREA
Order by COUNT(PROJECT_ID) DESC
I'm getting a "Failed to parse SQL query!" error when I try to run validation.
Is this enough info for some assistance? Any help would really be appreciated.
Thanks,
Rachel

Hi, Rachel,
user10774102 wrote:
I originally posted this in the APEX forum but someone there suggested this is more of a SQL question. Anyone out there who can provide some assistance?
Hi,
I'm a new user on APEX with no real SQL knowledge and I'm trying to build a dashboard with charts into an existing APEX application. Based on another application, I have come up with the following SQL code:
select null link
, CATEGORY label
, count (decode(PROJECT_STATUS,'1',PROJECT_ID))"Active"
, count (decode(PROJECT_STATUS,'2',PROJECT_ID))"Complete"
, count (decode(PROJECT_STATUS,'3',PROJECT_ID))"On Hold"
, count (decode(PROJECT_STATUS,'4',PROJECT_ID))"Pipeline"
, count (decode(PROJECT_STATUS,'5',PROJECT_ID))"Pending Review"
from GRAPO_PROHEADTRK
where (PROJECT_STATUS='1' or PROJECT_STATUS='2' or PROJECT_STATUS='3' or PROJECT_STATUS='4' or PROJECT_STATUS='5' or PROJECT_STATUS='6')
group by CATEGORY
Order by COUNT(PROJECT_ID) DESCIs there a problem with the code above?
It's curious that the WHERE clause includes "PROJECT_STATUS='6'", but there is no pivoted column for project_status='6', like there is for '1' through '5'. That's not necessarily a mistake, and it wouldn't raise an error in any case.
Instead of
where (PROJECT_STATUS='1' or PROJECT_STATUS='2' or PROJECT_STATUS='3' or PROJECT_STATUS='4' or PROJECT_STATUS='5' or PROJECT_STATUS='6')you could say
where PROJECT_STATUS IN ('1', '2', '3', '4', '5', '6')but that probably has nothing to do with your current problem.
The code from the other app was:
select null link
, FUNCTIONAL_AREA label
, count (decode(PROJECT_STATUS,'Active',PROJECT_ID))"Active"
, count (decode(PROJECT_STATUS,'Complete',PROJECT_ID))"Complete"
, count (decode(PROJECT_STATUS,'On Hold',PROJECT_ID)) "On Hold"
, count (decode(PROJECT_STATUS,'Recurring',PROJECT_ID))"Recurring"
, count (decode(PROJECT_STATUS,'Pipeline',PROJECT_ID))"Pipeline"
, count (decode(PROJECT_STATUS,'Not Approved',PROJECT_ID))"Not Approved"
from PM_V2
where LOB='S2S' and (FUNCTIONAL_AREA='Accounts Payable' or FUNCTIONAL_AREA='Expense' or FUNCTIONAL_AREA='Procurement' or FUNCTIONAL_AREA='Fixed Assets')
group by FUNCTIONAL_AREA
Order by COUNT(PROJECT_ID) DESC
I'm getting a "Failed to parse SQL query!" error when I try to run validation.Is that an Apex error message? Sorry, I don't know anything about Apex.
If you can't get a more specific error message from Apex, then try debugging this statement in SQL*Plus. When you get it fixed, then you can copy it back into Apex.
If this is a SQL problem, then you should be able to re-create the problem in pure SQL.
If you can't re-create the problem in pure SQL, then it's probably an Apex problem, and belongs in the Apex forum, not here.
I don't see anything obviously wrong with your code, but I can't tell if, for example, you spelled a column name wrong, or if something has the wrong data type
Is this enough info for some assistance? Any help would really be appreciated.It wiould be better if you posted a completE script that people could run to re-create the problem, and to test their ideas.
Whenever you have a problem, please post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) from all tables involved.
Also post the results you want from that data, and an explanation of how you get those results from that data, with specific examples.
Always say which version of Oracle (and any other software, such as Apex) you're using.

Retrieve underlying SQL query for deski report via java SDK in BOXIR2

Hi all,
I am trying to retrieve underlying SQL queries of a deski report in BOXIR2. However I find the error as
oDataProvider = oDocumentInstance.getDataProviders().getItem(i1);
System.out.print(oDataProvider.getName());
oSQLDataProvider = (SQLDataProvider) oDataProvider;
oSQLContainer_root = oSQLDataProvider.getSQLContainer();
But "This feature is not supported for desktop Intelligence " exception has occured.
I am running the same query for Webi, and I did not find any issue . After several time spending in google, it appears to me that this code is supported by webi only. But "This feature is not supported for desktop Intelligence " exception has occured.
Please help me to find out the solution in java SDK. If its not supported by Java SDK, then could you please provide me any workaround , e.g. any macro . Any help !!
Regards,
Nita
Edited by: Nita Prasad on Aug 11, 2009 11:20 AM
Edited by: Nita Prasad on Aug 11, 2009 11:25 AM

Hi Fritz,
I am not getting the way.. how to open the deski report programmatically. I am writing the code in this way:
Dim oInfoObjects1 As CrystalInfoStoreLib.InfoObjects
        Set oInfoObjects1 = oInfoStore.Query("SELECT * FROM CI_INFOOBJECTS WHERE SI_NAME='" & oInfoObject.Title & "' AND SI_ID='" & oInfoObject.Id & "' order by SI_NAME")
    Dim oInfoObject1 As CrystalInfoStoreLib.InfoObject
    Dim UserCount1 As Integer
        UserCount1 = oInfoObjects1.ResultCount
        MsgBox "SELECT * FROM CI_INFOOBJECTS WHERE SI_NAME=' " & oInfoObject.Title & " ' AND SI_ID=' " & oInfoObject.Id & " ' order by SI_NAME"
        MsgBox " Total number of Deski reports are : [" & UserCount1 & "]", vbOKOnly
    Dim j As Integer
     For j = 1 To UserCount1
      Set oInfoObject1 = oInfoObjects1.Item(i)
            sFile_ReportList = StrConv(oInfoObject1.Title, vbLowerCase) & ".rep"
            sFile_Output = "D:\TraceWrite1\ " & StrConv(oInfoObject1.Id & "_" & oInfoObject1.Title, vbLowerCase) & ".txt"
            sFile_ReportListTemp = StrConv(oInfoObject1.Files.Item(j), vbLowerCase)
            MsgBox "[" & sFile_ReportList & "]", vbOKOnly
                    If Dir(sFile_ReportList) = "" Then
            MsgBox "The text file [" & sFile_ReportList & "] for the DeskI documents does not exist!" & vbCrLf & "Aborting process."
            Exit Sub
            End If
I am getting the error on line ... If Dir(sFile_ReportList) = "" Then... The code is not able to locate the deski report path.
Is this the correct way to get a deski report information? Please let me know, If I am going in the right direction.
Edited by: Nita Prasad on Aug 18, 2009 3:47 PM

Descriptor query manager and custom PL/SQL call for the data update

hi all,
in the application, I'm currently working on, the operations for the data INSERT/UPDATE /DELETE are allowed only by means of PL/SQL function. Using the descriptor's query manager I'm trying to modify default behavior of TopLink and execute PL/SQL when there is a request to modify the data.
DescriptorQueryManager entityQueryManager = session.getClassDescriptor(MyEntity.class).getQueryManager();
StoredFunctionCall call = new StoredFunctionCall();
call.setUsesBinding(true);
call.setProcedureName("merge_record");
call.setResult("id", Integer.class);
call.addNamedArgument("cbic_id", "id"); // MyEntity.getId() – works!
call.addNamedArgument("publication_flag", "publicationFlag"); // MyEntity.getPublicationFlag () – works!
call.addNamedArgument("routing_id", "routing"); // MyEntity.getRouring() – works!
call.addNamedArgument("issue_id", "issue"); // MyEntity.getIssue() – works!
call.addNamedArgument("country_id", "country"); // MyEntity.getCountry() – works!
entityQueryManager.setInsertCall(call);
entityQueryManager.setUpdateCall(call);
entityQueryManager.setDeleteCall(call);
the problem:
when I call: MyEntity savedObject = (MyEntity) UnitOfWork.deepMergeClone(entity);
the binding doesn’t happen and I see following logs:
[TopLink Finest]: 2008.02.01 02:51:41.534--UnitOfWork(22937783)--Thread(Thread[AWT-EventQueue-0,6,main])--Merge clone xxx.Entity[id=2000]
[TopLink Warning]: 2008.02.01 02:51:41.550--ClientSession(8454539)--Thread(Thread[AWT-EventQueue-0,6,main])--Missing Query parameter for named argument: id null will be substituted. (There is no English translation for this message.)
[TopLink Warning]: 2008.02.01 02:51:41.550--ClientSession(8454539)--Thread(Thread[AWT-EventQueue-0,6,main])--Missing Query parameter for named argument: publicationFlag null will be substituted. (There is no English translation for this message.)
[TopLink Warning]: 2008.02.01 02:51:41.565--ClientSession(8454539)--Thread(Thread[AWT-EventQueue-0,6,main])--Missing Query parameter for named argument: routing null will be substituted. (There is no English translation for this message.)
[TopLink Warning]: 2008.02.01 02:51:41.565--ClientSession(8454539)--Thread(Thread[AWT-EventQueue-0,6,main])--Missing Query parameter for named argument: issue null will be substituted. (There is no English translation for this message.)
[TopLink Warning]: 2008.02.01 02:51:41.565--ClientSession(8454539)--Thread(Thread[AWT-EventQueue-0,6,main])--Missing Query parameter for named argument: country null will be substituted. (There is no English translation for this message.)
[TopLink Fine]: 2008.02.01 02:51:41.565--ClientSession(8454539)--Connection(6233000)--Thread(Thread[AWT-EventQueue-0,6,main])--BEGIN ? := merge_record(cbic_id=>?, publication_flag=>?, routing=>?, issue=>?, country=>?); END;
bind => [=> id, null, null, null, null, null] – WHY?
Calling straight forward the same PL/SQL block using:
DataModifyQuery updateQuery = new DataModifyQuery();
updateQuery.setCall(call);
updateQuery.shouldBindAllParameters();
and passing parameters as Vector works very well.
Could you please help me to fix the binding problem when I’m using the PL/SQL with Query Manager?
regards,

Hello,
This is fairly common. Since the database is case insensitive (mostly) field names passed in don't really matter much. Unfortunately, java string comparisons are case sensitive, so if you db column for the getId() property is defined as uppercase "ID" it will not match to the lower case "id" defined in the
call.addNamedArgument("cbic_id", "id");
This will cause TopLink to get null when it looks for the "id" field in the row it builds from your MyEntity instance.
Matching the case exactly will resolve the issue.
Best Regards,
Chris

Using a single external drive for both Time Machine AND for manual backups?

I'm new to Leopard and haven't launched Time Machine yet. I would like to use a single (500 GB) external hard drive to use with Time Machine, plus I would like to use whatever portion of this external drive Time Machine isn't using to keep some other files upon it as well--things that I can drag-and-drop manually and then trash from my computer's HD (avi files, etc., so that they don't take up space on the computer). Is there anything special I need to do with the external hard drive before I let Time Machine have its way with it, so that I can also do drag-and-drop manual file backups with it?

I’m not terribly knowledgeable, but I’ll tell you what seems to be working for me.
I also have a 500GB external drive which I had planned to use for TM for my MBP. I partitioned it (using Disk Utility) into two partitions. One I created nearly the same size as my MBP drive, the other I used for TM.
I used the smaller partition for a backup using SuperDuper prior to upgrading from Tiger to Leopard. Once I tested that I was able to boot from it and that all my programs seemed to work, I upgraded to Leopard and told it to use the other partition for TM.
It then created a TM icon for the other partition and, to the machine, it looks like a separate drive. I’ve seen no performance hit at all.
Just one man’s experience, though I haven’t yet tried to retrieve anything.
Good luck.

How can I use single hard drive for both Mac OS and Windows without changing the formats and reformatting?

I have a windows PC and a Macbook Air and a 1TB external hard drive. They said in order to transfer large files into the hard drive you have to change the format of your hard drive (which would be from MS-DOS to Mac Os extended) so how can I use my external hard drive on my windows PC without reformatting its files? Please heeeelp

Natively Windows can read and write to NTFS, FAT32, and exFAT while the Mac can read and write to FAT32, exFAT, and MacOS Extended.
Option 1: You can purchase driver software for Windows to allow it to read and write Mac's MacOS Extended or you can purchase a driver to allow the Mac to read and write to NTFS.
Option 2: you can format the hard drive for exFAT and use it with both Windows and the Mac without purchasing any special drivers. (Obviously the 4GB file size limit is why you don't want to use FAT32)

Function module called for order report in pegging screen

From MD04 when we try to find out the higher level production order it takes us to the planned ind req(PIR). In that screen, we have an "order report" button which takes us to the production order linked to the PIR.
Can anyone please let me know the function module that is called when the "Order report" button is hit.
Cheers,
KB

HI
I am facing the same problems with the pegged requirements and an not able to read the order route using MD_PEGGING_NODIALOG .
i am not able to find function modul CNM2_ORDER_PROGRESS which is mentioned in this forum?
It this a new module with a new service package - we have not put any service package on since 2008 in our 6.0 version.

Specific SQL statements for custom report?

I am trying to create a custom report that gives me the System Name, Operating System, Manufacturer, Model, and Last HW Scan. I am not a SQL expert, but which statements would I need to select when I am in SCCM Console and creating a new report? It lists
hundreds of them. Any help is appreciated, thanks in advance.

This query will get you started.
http://smsug.ca/blogs/garth_jones/archive/2008/02/04/basic-all-in-one.aspx
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

SSIS execute single SQL Task for running multiple SQL statements on TeraData DB connection

Hi,
I need to run multiple statements in TeraData connection ("Go" command between the statements is not recognized). how can I execute 1 SQL task referring to those multi statements? I'm using file connection as well. all the statements located in a single
file.
I'm working with SSIS 2008, TERADATA 12.0.
Thanks

sure.
create winbatch file (*.bat).
in batch file set that command:
bteq < scriptfilePath.txt (or .bteq)> LogsFolderPathOutputfile.out
scriptfile should contain:
.logon
Server/user, pswd
your script.
if you want to set error handeling points, set the followings between yor command statements:
.IF ERRORCODE <> 0 THEN .GOTO SqlError;
at the end of script, set:
-- Log successful completion
.LOGOFF;.QUIT 0;
.LABEL SqlError.QUIT ERRORLEVEL;
you can view logs at the outputfile you stated above.
enjoy.

Using a single ext drive for both Snow Leopard and Mtn Lion?

I still have no iOS device (gasp), and I frankly don't like the differences I keep reading about the iOSsy Mtn Lion, as contrasted with Snow Leopard (on my 08 MBP). But yeah, I know I have to make the jump eventually. Meanwhile I'm thinking of getting a new 2TB external drive, creating a 1TB partition for each system. (The present Snow Leopard drive is about 740GB). That way I can get to know Mtn Lion while I still have the long-term tried and true personalized folder hierarchy in Snow Leopard—until I'm ready to give up SL completely.
(I know I could just put Mtn Lion on the external; I prefer two partitions simply for the convenience of adding another external backup for the SL system.)
Does this make sense? Does it seem practical? I welcome any suggestions or concerns. Thanks.

Yes, you can partition any drive into two volumes and install Snow Leopard on one and Mountain Lion on the other. If you don't yet have Mountain Lion then you need to install Snow Leopard on both partitions to start. The volume on which you will put Mountain Lion needs to be updated to 10.6.8. Download and install Mac OS X 10.6.8 Update Combo v1.1.
You can then run the App Store application to purchase and download Mountain Lion to install on this volume.
To save time you do not have to install Snow Leopard on the volume being used for Mountain Lion. But you will need to install it on the other volume so you can get the Mountain Lion installer unless you already have it.
Purchase and download Mountain Lion. When the Mountain Lion installer opens click on the Install button. Select the Other disks link in order to select your blank volume, then click on the Install button to put Mountain Lion on the blank volume.

Single SQL call for both Report & Chart

Similar Messages

Maybe you are looking for