JDBC Sender channel not processing the messages
Hello,
From yesterday onwards JDBC Sender channel not processing the messages. In CC monitoring it is showing in Green Led and status is functioning. Cahnnel is polling for messages to DB server as per polling interval. But it is not processing the msg's. Under Processing detials for cluster node it is showing only "Processing Started" for each polling interval.
I have done the check in DB server by executing the query in the channel, whether there are any records are exisitng or not. There are 1000+ records.
Previously the parameter "Disconnect from DB after processing each message" was not set. I have set the parameter and activated in Productiion. Still the messages are not processing by channel
What was the problem? How to rectify with this.
Cheers
Veera
Check in the Visual Admin >Cluster> "LOCKING ADAPTER"
we get a option of Display Locks .Check for an entry with
NAME : $XIDBAD.JDBC2XI
reset the locks and restart the CC ,now it works fine.
Note 1083488 - XI FTP/JDBC sender channel stop polling indefinitely(04/04S)
Similar Messages
-
Nw BPM error : JPR could not process the message error whie processing the request
Hi All,
I am trying to implement the new NW BPM Scenario(I am fallowing the Williams Document as it is), When I try to trigger the message it's getting failed at BPM XI channel level , this is the below error .
Delivery of the message to the application using connection JPR failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing inbound message. Exception: Error while proecessing request. Setting message to status failed
"System Error Received. HTTP Status Code = 200: However System Error received in payload ErrorCode = GENERAL ErrorCategory = XIAdapterFramework Parameter1 = Parameter2 = Parameter3 = Parameter4 = Additional text = com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing inbound message. Exception: Error while proecessing request ErrorStack = "
Kindly Help Me out from this error.
Thanks
PrasadI have solved the above error by mistake i have used sync mode in sender communication channel.
Now my message is going inside the BPM, but unfortunately i am getting another error: -
Sync/Async - JMS receiver comm. channel not processing
I have a Sync/Async scenario (without bpm) in PI 7.11:
RFC -> PI -> JMS
whereby the JMS receiver comm. channel does not fully process the message.
More specifically, the RFC sender comm. channel gets a message in and passes the message to the JMS channel, but that JMS channel within the RWB comm. channel log only shows the entry:
- Message processing started
The odd twist to this is that when we bring the PI server down, then back up again, (or wait a period of time, still trying to determine this period) the FIRST message attempt does successfully get processed, i.e. the first message on that JMS receiver comm. channel RWB log shows as:
- Channel successfully processed the message: 08499236-387c-11e0-b002-000025bab2c2
- Stored the correlation ID 08499236-387c-11e0-b002-000025bab2c2 of the request JMS message: ID:c3e2d840d4d8d4f24040404040404040c754dc12d8b54ec6 correponding to the XI message: 08499236-387c-11e0-b002-000025bab2c2
- Message processing started
(but then because of an issue on the target system, no response comes back, so then we'll additionally get the log entry:
- Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: no message received
Any suggestions appreciated on what I can check here to try and figure this out. Possibly because the first message eventually errors out, it is stopping the other subsequent msgs from getting processed...
When I check the audit logs of a 'success' msg vs. a not-successful msg, the success msg has an entry (and subsequent entries) of:
14.02.2011 12:50:19 Information Transform: transforming the payload ...
14.02.2011 12:50:19 Information Transform: successfully transformed
14.02.2011 12:50:19 Information ROB: entering RequestOnewayBean
14.02.2011 12:50:19 Information ROB: forwarding the request message
14.02.2011 12:50:19 Information ROB: leaving RequestOnewayBean
14.02.2011 12:50:19 Information JMS Message was forwarded to the JMS provider succesfully."
14.02.2011 12:50:19 Information XMB Message as Binary was forwarded to the SAP XI JMS service succesfully.
14.02.2011 12:50:19 Information WRB: entering WaitResponseBean
14.02.2011 12:50:19 Information WRB: retrieving the message for 08499236-387c-11e0-b002-000025bab2c2 ...
wheras the non-success msg shows only:
14.02.2011 12:55:30 Information Transform: transforming the payload ...
14.02.2011 12:55:30 Information Transform: successfully transformed
14.02.2011 12:55:30 Information ROB: entering RequestOnewayBean
14.02.2011 12:55:30 Information ROB: forwarding the request message
14.02.2011 12:55:30 Information ROB: leaving RequestOnewayBean
So, we can see that the message is not "forwarded to the JMS provider..." in the non-success case.
And also the sxi_monitor shows these messages with a status of "Log version".
KeithHi Siddhesh - yes that was a while back and am trying to remember the resolution. I have implemented sync/async bridges (as well as async/sync bridges) successfully, so I don't mind checking your settings, particularly I am interested in the settings within the Module tab of the JMS receiver. I can then compare to mine if you'd like. Also if you can let me know what underlying queuing system in that target system (e.g. MQSeries?) that would be great.
Regards,
Keith -
JDBC sender channel running but not picking up the data from sp
Hi,
One of the jdbc sender channels in production is running at its schedule time but it is not picking up the data from the sql side, we have checked with the sp side and they are saying that sp is running fine. No changes have been done in its configuration. Last message coming in RWB is Retry interval started but that is of 1 day and its already been 3 days. I tried by starting and stopping the channel but of no use. The channel was re activated but that also didn't help.
Please help, what can be the reason for the same.
thanks.Hi,
The JDBCadapter ( The respective channel) is definitely locked in PI . Ideally for each polling interval a lock is being created and once the processing is over , the lock should be released/deleted automatically to allow further polling interval. If the lock is not released by the system automatically,further polling will not happen as expected. ( This may affect all sender JDBC adapters as well. I would recommend to do a check in all sender JDBC communication channels)
You can see/delete the locks in Visual admin.
Go to Server>Services->Locking adapter and click refresh
The entries for JDBC adapter ( with name $XIDBAD.JDBC2XI) should be deleted by selecting those particilar entries and click delete selected locks.
If you have more than one node, then same should be done in all server nodes.
The temprory solution would be creating/copy the existing channel in ID with same properties and assign it into particular sender agreement.
But, the lock may be created again which potentailly stops all your database interfaces. Hence i would suggest to use Disconnect From Database After processing of Each messages in Advanced tab in the sender JDBC adapter.
Hope this solves your issue.
PS: The same bahaviour would expected for all file adapter as well -
Sender jms adapter-archiving before processing the message
Hi,
Do we have any option in Sender JMS adapter to archive the message before processing the message?
I have searched in sender JMS adapter (XI7.0) settings, but couldn't find any option.
My assumption is whether any option provided in configuration setting of adapter engine or any other alternatives.
Thanks,
Srini.Hi Srini.
Here is the code. But you may prefer the EAR module, just for deploy. I need your email to send it to you.
If you want to create it yourself follow the steps in this guide and paste the code:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f013e82c-e56e-2910-c3ae-c602a67b918e
When you configure the module in the JMS sender communication channel you have to spedify 2 parameter for the log file location:
"file.path" (XI server file system path) and "file.name"
CODE:
package com.bfa.af.modules;
import java.io.FileWriter;
import java.io.IOException;
import java.io.PrintWriter;
import java.util.Date;
import javax.ejb.CreateException;
import javax.ejb.SessionBean;
import javax.ejb.SessionContext;
import com.sap.aii.af.mp.module.Module;
import com.sap.aii.af.mp.module.ModuleContext;
import com.sap.aii.af.mp.module.ModuleData;
import com.sap.aii.af.mp.module.ModuleException;
import com.sap.aii.af.ra.ms.api.Message;
@author ibermatica
public class BFATraceModule implements SessionBean, Module {
private SessionContext myContext;
public void ejbRemove() {
public void ejbActivate() {
public void ejbPassivate() {
public void setSessionContext(SessionContext context) {
myContext = context;
public void ejbCreate() throws CreateException {
public ModuleData process(ModuleContext moduleContext, ModuleData inputModuleData) throws ModuleException
FileWriter outFile;
try
Date date = new Date();
String filePath = moduleContext.getContextData("file.path");
String fileName = moduleContext.getContextData("file.name");
outFile = new FileWriter(filePath + System.getProperty("file.separator") + fileName, true);
catch (IOException e)
e.printStackTrace();
throw new ModuleException(e);
PrintWriter out = new PrintWriter(outFile, true);
try
out.println("--- Start of message ---");
//Get message content.
Message data = (Message)inputModuleData.getPrincipalData();
if(data.getDocument() != null)
out.println(data.getDocument().getText());
else
out.println("Empty message.");
out.println("--- End of message ---");
out.println("Total characters: " + data.getDocument().getText().length());
catch(Exception exc)
out.println(exc.toString());
finally
if(out != null)
out.close();
if(outFile != null)
try {
outFile.close();
} catch (IOException e1) {
throw new ModuleException(e1);
return inputModuleData; -
I received a message that my iphone 4S was unlocked and that I should connect to iTunes to complete the process. When I connect to itunes I do not get the message "Congratulations you iphone has been unlocked". I have the latest itunes. Welcome help.
ihabf
[email protected]See Here
https://discussions.apple.com/message/15290457#15290457
From the More Like This on the right... -
I bought a used i pod 4 for my daughter and it does not have the message icon on it ( not even in settings) how can I get the message icon on it so it can receive and send messages
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Script Alert: "Sorry I could not process the following files" (Error Message using Image Processor)
I'm a seasoned Photoshop/Bridge CS5 user who recently upgraded to CS6. In Bridge I just ran my first Image Processor batch, trying to convert a set of RAW .NEF files to .PSD files with a basic editing action I created applied to them. Photoshop CS6 opens the files from Bridge and applies the actions, but then I get the "Script alert" error message "Sorry I could not process the following files" and a list of all of the files in the batch I was trying to run the script on. The files all remain open and are saved on my hard drive in a folder created by the Image Processor script, but do not close unless I manually close them. I never had this problem in CS5 where the image processor would apply the desired actions to the batch of photos one at a time, then save and close. Thoughts on how I can fix this bug?
Hey Jeff--
No specific action steps to make the image safe - no flattening, etc. Had problems narrowing down the specific action step causing the problem. So I ran the Image Processor script in the ExtendScript ToolKit and debugged in. (I'm using the version that shipped with CS4.)
Turns out what was happening is that the app.activeDocument.close() command on line 1490 was never getting called, because the this.SaveFile() above it was throwing an exception. More debugging got me to the problem - SaveFile() tries to restore the history state after making a doc safe for saving as a JPEG. This causes an exception. So I commented out line 1571:
// app.activeDocument.ativeHistoryState = historyState;
The script runs just fine after this. I commented out the close to see what history states got added to the doc, but no new states are recorded, so commenting out the restore line should not cause any problems.
Of course, my solution does not solve the problem and I may need to comment out all the saveFile() lines that does this. Not sure why some actions have this problem and others don't. The actions I am running have about 25 steps. Perhaps PS is not catching up quick enough. I added a $.sleep(2500) after the restore history but that didn't help.
So, not sure where this gets us. I will check about posting an action set with just one of the actions that cause the problem. But I may also have our customer comment out that line of the Image Processor script.
Hope this helps. May post more next week. -
I am having issue with some application, packages, and images pushing from my Primary SCCM server to the secondary servers and DPs.
I am thinking that the issues are all related so I am going to just talk about the image that I am having a problem with push.
The image has successfully transfered to the Primary site, and secondary sites, but it is having a problem with a DP. The error that shows up in "Content Status" says "Detail will be available when server finishes processing the
messages". All the servers are 2008 R2 server, with SCCM 2012 SP1.
I would take a look at logs for this, but I am pretty new to SCCM, and I'm not sure which log to look at for additional information.
Thank you for any help that can be provided.The logs pointed me to an error about the Pull DP settings. I think the issue is that I have the images stored on the Primary site, and the DP does not have the Primary site in its Pull DP settings tab. I unchecked the option, and it appears to be working
now. Thank you -
FTP channel - not processing files, coz one of the files is wrong,
Hi all,
I have an FTP adapter which has Seeburger modules for charset conversion. It is supposed to poll a dir. Read the file and delete it with a QoS Exactly once and file type as binary.
If the files in the directory I poll are all good ones, then the scenario goes smooth. But when one of the files is wrong(structure of the file is not correct), the adapter gives
Error: javax.resource.ResourceException: --- Conversion of synchronous request from module chain ended with errors ---[Error:ID=2099;LEVEL=1] InhouseDocReader doSyntaxCheck(): offset[119]: the found segment UNB is not in the message description. DESCRIPTION: InhouseDocReader Error: The Segment UNB is missing in the message description. Check your file.
My problem is, when such an error happens, the adapter does not go to the next file. It kind of goes to a loop. So even if there are good files in the directory, they are not read because a wrong file is blocking the adapters way. Hope the issue is clear !
Any idea about why is this? Is there a way to tell the adapter to ignore the wrong one and proceed to the next?
Otherwise, is there a way to rename the wrong file in such a way that the adapter can proceed to the next file or move the wrong file to another directory?
We are at SP8, someone was telling SP10 solves this , not sure, is there a way to fix this in SP8, because, i can't change SP level at the moment ?
Thanks in advance.
Cheers
danusHi
I found this while browsing through help.sap.com
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
Archive Source Files with Errors
To archive source files where a permanent error occurred during processing, set the indicator.
A permanent error occurs either during the conversion of the file content, or in a module in the module processor.
More information: MessageTransformBean, Migrating Dispatcher Classes
○ Specify the Directory for Error Archiving.
○ To add a time stamp to the archived file, select Add Time Stamp.
Can some one please tell me how to do this ?
cheers
danus -
Hello, i am having problems getting face time to work, I keep getting an error message saying the server could not process the registration, I am using the username and password I always have and it has always worked in the past, any ideas?
We aren't Apple, just users like you volunteering to help other users with problems. Threatening to go to Samsung doesn't mean anything to us. What troubleshooting have you tried so far?
-
I can't send any pictures on the message application. It tries to send it but ends up saying "Not delivered and an !" How do I fix this?
See:
* [[Images or animations do not show]]
*A way to see which images are blocked is to click the favicon ([[Site Identity Button]]) on the left end of the location bar.
*A click on the "More Information" button will open the Security tab of the "Page Info" window (also accessible via "Tools > Page Info").
*Go to the <i>Media</i> tab of the "Tools > Page Info" window.
*Select the first image link and scroll down though the list with the Down arrow key.
*If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain. -
JDBC Sender Adapter - NOT FETCHING RECORDS...
Hello Experts,
I know this was answered in a separate thread (JDBC Sender Adapter - NOT FETCHING RECORDS -PROCESSING STARTED).
However, my question is, Is there a way that we can be notified if a channel has stopped fetching records?
or is there a reporting tool that can be used to check/monitor if a channel is not processing any messages?
Thanks & Kregards,
allarHi Sreedhar,
Thanks for your reply.
These case is not being captured by our alert configuration because its not throwing any error.
in the communication channel monitoring, we see only something like this..:
3/16/09 8:25:19 PM Processing started
3/16/09 8:34:20 PM Processing started
3/16/09 8:33:55 PM Processing started
3/16/09 8:32:54 PM Processing started
but no error is being displayed nor sent.
Also, there was a case that the channel just stopped fetching, even though everything is active.
example log:
3/12/09 8:32:54 PM Processing started
We're looking for ways on how we can trap these scenarios as early as possible, get us notified and perform adapter-lock release when needed.
Regards,
allar -
Jdbc sender channel memory size issue
Hi Experts,
We are facing the below error in connect to jdbc sender channel from XI . Could anyone of you suggest me the right action to be taken in this regard.
Database-level error reported by JDBC driver while executing statement 'select * from*********where posted = '0''. The JDBC driver returned the following error message: 'com.microsoft.sqlserver.jdbc.SQLServerException: The system is out of memory. Use server side cursors for large result sets:Java heap space. Result set size:614,143,127. JVM total memory size:1,031,798,784.'. For details, contact your database server vendor.
Appreciate your quick help.
Thanks & Regards,
Ranganath.Regulate the number of records returned by Select statement for permanent fix.
Few more things....
a)If you want to select only some fields, then dont use Select * from table. Rather specify select a,b,c from tablename
b) specify some flag in the table so that read some records each time and in the update statement update the flag for those records already read. So that you will not reread the same records in the next message.
Hope you understand.
c) Increasing java heap size is temporary fix. -
How to re-use one SOAP Sender Channel for two different messages?
Hi!
I have an XI Proxy to SOAP Sync Scenario. 5 messages uses only 2 channels - cc_XI_Sender and cc_SOAP_Receiver. All messages comes from one Sender Channel and goes to one Receiver channel, and it works fine.
When I make the same for SOAP to XI Proxy Sync Scenario, I've got a problem. For example I have 2 different messages (mi_so_MSG_ONE and mi_so_MSG_TWO), so it works, if I had a two different sender channels (cc_SOAP_R1 and cc_SOAP_R2).
If I set the same Sender Channel in both Sender Agreements (cc_SOAP_R1), only one message (mi_so_MSG_ONE) goes without errors. When I send a second message (mi_so_MSG_TWO), in SXMB_MONI this message comes from Business System (BS_TEST) as message type one (mi_so_MSG_ONE), and then in stage of transformation in Interface Determination goes to message mapping program for other kind of messages (MM_MSG_ONE_to_XI_PROXY). And then - error in message mapping.
I try many URLs for both messages:
1) http://host:port/XISOAPAdapter/MessageServlet?channel=:BS_TEST:cc_SOAP_R1&version=3.0&Sender.Service=&Interface=
2) http://host:port/XISOAPAdapter/MessageServlet?channel=:BS_TEST:cc_SOAP_R1&version=3.0&Sender.Service=BS_TEST&Interface=*
3) http://host:port/XISOAPAdapter/MessageServlet?channel=:BS_TEST:cc_SOAP_R1&version=3.0&Sender.Service=BS_TEST&Interface=...MyNameSpace...mi_so_MSG_TWO
Message in payload:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
<!-- Inbound Message -->
<MSG_TWO xmlns="urn:xxx:yyy:MyNameSpace" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">... some fields... </MSG_TWO>
But in SOAP Header I see that is NOT second message!
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
< !-- Inbound Message -->
<SAP:Main>
<SAP:MessageClass>ApplicationMessage</SAP:MessageClass>
<SAP:ProcessingMode>synchronous</SAP:ProcessingMode>
<SAP:MessageId>93233F70-3E2F-11DF-8CD3-00237D301CD6</SAP:MessageId>
<SAP:TimeSent>2010-04-02T08:13:09Z</SAP:TimeSent>
<SAP:Sender>
<SAP:Service>BS_TEST</SAP:Service>
<SAP:Interface namespace="urn:xxx:yyy:MyNameSpace">mi_so_MSG_ONE</SAP:Interface>
</SAP:Sender>
<SAP:Interface namespace="urn:xxx:yyy:MyNameSpace">mi_so_MSG_ONE</SAP:Interface>
</SAP:Main>
Is it correct that many kinds of messages cannot goes through one Sender Channel ? If not... How can I reuse one SOAP Sender Channel for both this messages?
Thanks for helping.Thanks for answers!
It means a webservice application will be deployed and exposed in PI using the associated Message Interface and its namespace information in the SOAP Sender channel.
It means only one Sender Channel per one pair of names (name of Message Interface and name of namespace). And it will fail if I change something. And question is: why URL for sending SOAP message contains parameter "Interface"?
"backward compatibility" or "for future use only"?
Nothing happens when I change this parameter, seems that name of Interface comes from first of founded Sender Agreements.
If the structures are the same
No. Structures are different.
Making one structure per all SOAP incoming messages looks workable, but... looks strange (in fact I have a lot of SOAP messages, more than 100 Sender channels).
I found an information, that I can use one Sender channel per many messages with different structures only if I make this messages like different Operations in one Service Interface (in PI 7.1).
But in this case in list of messages in SXMB_MONI I will see only a one name of Service Interface for all my messages and it's not so comfortably for supporting: to take a name of operation that fails I need to goes inside.
In older version of XI (prior 7.1) using one sender channel per many messages allowed without any hints.
Maybe you are looking for
-
I have been using Firefox instead of MS Explorer to access our Comcast E-mail account on my Lenova laptop for several months. Firefox was loaded onto my Lenova Laptop during mid-2011. I continued to primarily use MS Explorer as my search engine while
-
Mp3 format, still cannot transfer! Plz help!
Hi, I am trying to transfer a file to my iPod. It says it is an mp3 format sound, the file can be played on iTunes, but when i try to transfer it, there is an error saying that "the song cannot be played on this iPod. What do i do? Plz someone help..
-
Flash CFForm to show cfinput fields in CFDIV
I have a flash form with several fields that work properly. I need to add a submit button and not have the page refresh when clicked. The values from the cfinput fields should display in a CFDIV that is only visible after the "submit" button is press
-
Help needed-regarding swing component and linux
Hi I am trying to run java program on Linux machine which doesn't have GUI support. Due to that following exception is throwing, java.awt.HeadlessException: No X11 DISPLAY variable was set, but this program performed an operation which requires it. a
-
Creating Temperory Table For SQL Performance.
Hi, I have a SQL query, SELECT NVL(SUM(S.STDY_EFFORTS * K.PERCENTAGE_VALUE / 100), 0) FROM effort_t S, FULL OUTER JOIN role_dtls_t K ON S.DEAL_DETAIL_ID = K.DEAL_DETAIL_ID AND S.TOWER_ID = S.TOWER_ID AND S.SUBTOWER_ID = K.SUBTOWER_ID AND S.LOCATION_I