How to re-use one SOAP Sender Channel for two different messages?

Hi!
I have an XI Proxy to SOAP Sync Scenario. 5 messages uses only 2 channels - cc_XI_Sender and cc_SOAP_Receiver. All messages comes from one Sender Channel and goes to one Receiver channel, and it works fine.
When I make the same for SOAP to XI Proxy Sync Scenario, I've got a problem. For example I have 2 different messages (mi_so_MSG_ONE and mi_so_MSG_TWO), so it works, if I had a two different sender channels (cc_SOAP_R1 and cc_SOAP_R2).
If I set the same Sender Channel in both Sender Agreements (cc_SOAP_R1), only one message (mi_so_MSG_ONE) goes without errors. When I send a second message (mi_so_MSG_TWO), in SXMB_MONI this message comes from Business System (BS_TEST) as message type one (mi_so_MSG_ONE), and then in stage of transformation in Interface Determination goes to message mapping program for other kind of messages (MM_MSG_ONE_to_XI_PROXY). And then - error in message mapping.
I try many URLs for both messages:
1) http://host:port/XISOAPAdapter/MessageServlet?channel=:BS_TEST:cc_SOAP_R1&version=3.0&Sender.Service=&Interface=
2) http://host:port/XISOAPAdapter/MessageServlet?channel=:BS_TEST:cc_SOAP_R1&version=3.0&Sender.Service=BS_TEST&Interface=*
3) http://host:port/XISOAPAdapter/MessageServlet?channel=:BS_TEST:cc_SOAP_R1&version=3.0&Sender.Service=BS_TEST&Interface=...MyNameSpace...mi_so_MSG_TWO
Message in payload:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<MSG_TWO xmlns="urn:xxx:yyy:MyNameSpace" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">... some fields... </MSG_TWO>
But in SOAP Header I see that is NOT second message!
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
< !-- Inbound Message   -->
<SAP:Main>
<SAP:MessageClass>ApplicationMessage</SAP:MessageClass>
<SAP:ProcessingMode>synchronous</SAP:ProcessingMode>
<SAP:MessageId>93233F70-3E2F-11DF-8CD3-00237D301CD6</SAP:MessageId>
<SAP:TimeSent>2010-04-02T08:13:09Z</SAP:TimeSent>
<SAP:Sender>
    <SAP:Service>BS_TEST</SAP:Service>
    <SAP:Interface namespace="urn:xxx:yyy:MyNameSpace">mi_so_MSG_ONE</SAP:Interface>
</SAP:Sender>
<SAP:Interface namespace="urn:xxx:yyy:MyNameSpace">mi_so_MSG_ONE</SAP:Interface>
</SAP:Main>
Is it correct that many kinds of messages cannot goes through one Sender Channel ? If not... How can I reuse one SOAP Sender Channel for both this messages?
Thanks for helping.

Thanks for answers!
It means a webservice application will be deployed and exposed in PI using the associated Message Interface and its namespace information in the SOAP Sender channel.
It means only one Sender Channel per one pair of names (name of Message Interface and name of namespace). And it will fail if I change something. And question is: why URL for sending SOAP message contains parameter "Interface"?
"backward compatibility" or "for future use only"?
Nothing happens when I change this parameter, seems that name of Interface comes from first of founded Sender Agreements.
If the structures are the same
No. Structures are different.
Making one structure per all SOAP incoming messages looks workable, but... looks strange (in fact I have a lot of SOAP messages, more than 100 Sender channels).
I found an information, that I can use one Sender channel per many messages with different structures only if I make this messages like different Operations in one Service Interface (in PI 7.1).
But in this case in list of messages in SXMB_MONI I will see only a one name of Service Interface for all my messages and it's not so comfortably for supporting: to take a name of operation that fails I need to goes inside.
In older version of XI (prior 7.1) using one sender channel per many messages allowed without any hints.

Similar Messages

Can I use one Apple TV device on two different HD televisions to view the same info from a mini Mac?

Can I use one Apple TV device on two different HD televisions to view the same info from a mini Mac?

Welcome to the Apple Community Lschaef5318.
You need one Apple TV for each TV.

Can i use one DUNS to apply for two IOS Developer Enterprise Program

can i use one DUNS to apply for IOS Developer Enterprise Program?

I would think so, but you'll probably need to contact Apple Developer Support and confirm:
http://developer.apple.com/support/ios/enterprise.html
Regards.

How can I use the same "I Tunes" on two different computers

I’m using two different kinds of Personal Computer: One is Desktop PC And the other one is Notebook .
In each computer there are the same songs and when I get the new ones to the Desktop I want them to be placed on the Notebook or reverse.
Where does the I Tunes save the playlist on the hard drive ?
I have prepared a playlist on my Notebook and want it to be seen on the Desktop but I dont want to fallow the steps File > Library > Export Playlist on the Notebook. Is there any other way to make this issue instead of the mentioned steps.
How can I see the same Playlists and songs on two different computers ( notebook and desktop) including the updating processes.
Operating systems of the computers:
Desktop: XP Pro
Notebook: Vista Bussiness

I use SyncToy 2.0 to keep two instances of my library in sync. SyncToy's preview will show which files it is about to update giving you a chance to spot unexpected changes and during the run only the changed files will be copied saving lots of time.
As long as I sync after making updates at one instance of the library before making any updates at the other then everything works just fine. I periodically run iTunes Folder Watch to check for any orphaned entries or new items that haven't been imported into the active library. If your machines are regularly networked together this process is fairly straightfoward. Mine are in disparate locations so I use one of the (physically) small WD My Passport host powered drives which I take between home & work, synchronising at either end. This gives me three complete copies of my library so I'm covering backup & synchronisation in the same operation.
When connecting my iPod at either location iTunes recognises itself as the "home" library for the iPod so I'm able to use the sync with selected playlists option without getting warning messages about the iPod being synced with a different library.
tt2

How can I use one motion controller to control two robotic independently?

the help document says :
Note Configuring and clearing buffers is a processor-intensive operation on the motion controller that requires the allocation and deallocation of memory. You should configure and clear buffers only when motors are not moving and onboard programs are not running. For example, if you wish to execute three simultaneous contouring operations on axis 1, axis 2, and vector space 1 (with axes 3 and 4), you should first configure all three buffers before starting any of the operations. You can start the contour operations independently, and at different times, but should wait until all operations are complete before clearing any of the buffers.
and i tried to conduct two contouring operation on two vector space. and tried to clear or configuring buffer for one vector when another one is still moving. so that i can start or end the movement at any time i want,and it is ok.no error. but when i tried add a buffer breakpoint output along with each vector movement. the bp doesn't work if the other vector is running . is there anyway to solve this problem.

I think you've misunderstood what the dns attribute is for. The dns attribute returns the hostname of the client accessing your website, not the hostname of the website that linked to your website.
For example, when someone using the Comcast ISP goes to a malicious website at example.com that loads images from your website at www.amigoo.net, the dns attribute will be something like "c-1-2-3-4.ca.comcast.net", not "example.com". ACLs are used for authentication and authorization of clients (not the websites those clients chose to visit), and they don't provide the functionality you're looking for.
If I understand correctly, you want to prevent websites other than amigoo.net from linking to files in your d:/webserver/imat/pics_upload directory. You can achieve this adding the following lines to your obj.conf configuration file:
<Object ppath="d:/webserver/imat/pics_upload/*">
<Client referer="*~*amigoo.net">
PathCheck fn="deny-existence"
</Client>
</Object>

How can I use one external hard drive for both Time Machine and iPhoto Library?

I have been using a 1 TG LaCie external hard drive for Time Machine backups. My (older) Mac has 160 GB and is almost full. I would like to move my iPhoto Library to the external hard drive, but I've heard Time Machine doesn't share one space well. Should I
1. create another partition (but will this erase what I've already saved) with Disk Utility? *I am running Snow Leopard*
2. create another volume to use for iPhoto, and if so, should the two volumes be of equal size?
3. leave it with one partition and move the iPhoto Library to the same partition with Time Machine back ups?
I know I don't need the entire 1 TG for back up of 160 GBs. Please advise the best path to take. Thank you!

You are getting incorrect information from your ASP. If you look at drive specifications the heat generated is no different for high vs low capacity drives.
I have upgraded the internal drive in my iMac 2007 with a 3TB Hitachi drive without any heat issues or other problems.
Larger hard drives have higher density platters so to access any given amount data the drives travel a shorter distance. Higher capacity drives should therefore run cooler than lower density drives because the drive spends less time spinning to access data.

How can you use one image and edit it three different ways to export later?

I am a new Lightroom 3 user. How can use the same image and edit it multiple ways to produce mulitple images to later export? For example, I have a picture of a bride and groom. I want to use that image and create a color image, a black and white image, and a close up of their hands.

Do I need to do either of those options before I start editing the image at all? For example, what if I am working on the image and doing some creative edits. Then I think of another option that I could do. Is it too late at that time or can I still get the original image to begin with?

How do I use one of my photos for the desktop background?

I have a photo which I would like to have as my desktop background. How do I accomplish this?

Hi leduckmrb,
Are you talking about your computer desktop? If so, that isn't a Firefox thing at all. You'll have better luck looking at the [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/display_change_desktop_background.mspx?mfr=true Microsoft documentation].
Hopefully this helps!

HT3819 Can you use one i tunes account for two people? I get my sons messages from facetime which i dont want

Hi
My son and I both use the same i tunes account - can we share music but have them seperated He uses facetime now I get his friends on my i phone?
Would love to seperate but dont want to pay twice for songs
Thanks

See the How To Sections Here
http://www.apple.com/support/ipod/earlier/
And Here
http://www.apple.com/support/ipodclassic/
Also see this
Download Past Purchases
http://support.apple.com/kb/HT2519
Log into iTunes using the account the Purchase was made with... Click on Buy... and a notice will come up saying you already have it... do you wish to download it again... Click Yes...

How can I use the same Apple Id on two different devices without having to re-enter my payment details

I have a Macbook Pro and an iPad2 which I sync to the Macbook. Sometimes I buy apps straight from the iPad and other times from the Macbook but each time I change from one to the other I have to re-enter my payment details. Can I set my account up to recognise that I may buy from both of these devices?

Apple "verifies" your Apple ID account information with every purchase of all free or paid apps whether iOS devics or computers.
Apple wants to make sure someone else hasn't compromised your account.

SOAP Sender Channel Failed to render XIMessage. Reason: java.io.IOException

I am attemping to set up a sender channel using the SOAP adatper to process HTTP(S) posts containg a file that is being uploaded.
The Sender channel is set up to use HTTPS With Client Authentication, and selected "Do Not Use SOAP Envelope" -- since the payload will not be SOAP. I am simply trying to generate a message in PI from the HTTP post.
I have posted the data but am getting the following error in the channel:
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessageFormatException: Failed to render XIMessage. Reason: java.io.IOException: Missing mandatory element <sap:Main>sap:Receiver/sap:Service
The trading partner I am workgin with only has the ability to use a generic POST (I believe he is usnig CURL or some some other tool the 'post' the data.

Thank you for your reply.
The solution I am seeking is not for XML payload. Its a flat-file that one of our trading partners is sending to us, both for flat files as well as EDI/X12 data. I have the checkbox selected to not use the SOAP Envelope and am using the "nosoap=true" in the URL.
This should be simple, as all we need to do is to pass the data as posted by the trading partner to a SFTP or FILE adapter on the receiver side. Nothing more than we've already done using an AS2 Sender channel for, the trouble with in case case our trading partner does not support any encrypted transports except for HTTPS.
-Gerry

One instance for two different application

Hello,
I have to solve following problem..
need have one instance of object for two different application..fist is standard SE application and second is EE (web)..
SE application is a server..listen on and accepting connection from mobile phone..and EE application need to show list of connected devices and should say to SE application that new device was connected..
I would like to do this without database..only server and web app..
I have thought about RMI..but hope there is more simple solution..
Thanks a lot for your ideas.
Dmitrij

I would like to do this without database..only server and web app..You have your reasons for wanting this to be the case. If you are sure you don't want a DB, then pass the state of the object between the two ends using XML as the transport form. As someone said, you can use JMS or you can write an HTTP POST or probably other transport mechanisms other people will suggest to actually get it over the wire from one side to the other.
As to your question of how to sync state, just make the object you're sharing final after it's been created (on the side that creates it) and make the reference that receives it and holds it final also, after you've reconstructed it from the XML you received.

HOW TO CREATE SERVICE FOR SENDER SOAP COMMUNICATION CHANNEL FOR ECC PROXY

Hi Experts,
I need generate the service for sender soap communication channel for target url to receive the inbound proxy.
my scenario is like SOAP to proxy. while using receiver proxy also we are planing using AAE method .
i am using SOAP sender and SOAp receiver communication channel .i need to provide the target url for this communication channel.
how to generate the url for this and what is the transaction code .
Please help us.
Regards
Ravinder.S

Hi Ravinder,
Q.my scenario is like SOAP to proxy. while using receiver proxy also we are planing using AAE method.
SOAP to Poxy in this case.
For sender SOAP system, we can generate the WSDL link in ID part.
for Reveiver proxy give the integration engine URL.
http://IP:PORT/sap/xi/engine?type=entry
how to generate the url for this and what is the transaction code
There is no transaction code for generating the URL.
i hope this will help.
Regards,
Kesava.

HTTP Error 501 with SOAP Sender channel

Hello,
i've am simple Question:
I want to call the following SAP XI SOAP Sender channel "MySoapSenderChannel":
XI-Parameters:
namespace: <myInterfaceNamespace>
Interface: <myAsynchInterface>
QoS: Exactly Once in Order
Queue: MY_QUEUE
We do not care about the Response - so the processing is asynchron.
Thus my interface mapping maps to asynch interfaces. The desitnation
is an ABAP Proxy. The configuration has been done and tested.
Here my question:
according the documentation, the URL has the following syntax:
http://host:port/XISOAPAdapter/MessageServlet?channel=party:service:channel.
In our case:
http://<myHost>:8002/XISOAPAdapter/MessageServlet?channel=:MyService:MySoapSenderChannel.
But when i generate a WSDL for the interface out of the Configuration, the address is:
<soap:address location="http://<myHost>:8002/sap/xi/engine?type=entry&version=3.0&Sender.Service=MyService&Interface=...
and so forth.
But was is the difference between these 2 possibilities?
Why do i get HTTP Error 501 when i use the URL from the documentation (the first one)?
Thanx in advance
Gunnar

Gunnar,
I will suggest you to go through it once to check all your connection.
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Regards,
Sarvesh

Specifying queue name in SOAP sender channel

Hi
We are on XI 3.0 SP18 - I have a requirement in which a soap webservice exposed out of the XI box - is to be called in an asynchronous mode - the webservice posts - document onto R/3 using an ABAP server proxy.
Now, there is also a need to post documents onto R3 - by serializing through an object key - material number ( say updates to a material ). I saw that there is a queue name in the soap sender channel setting when I choose eoio - qos . Is this queue name static ?
Also, any suggestions on how I can serialize the calls to the webservice based on an object key ( material number is supplied by the soap client ) all the way to R3 ( I am using a ABAP server proxy on the R3 side )

Ravi
I am looking for way to specify a non-static queue name here - so that I could establish a queue based on an object key from the source - web service client all the way to R3 - I wanted to know the options available on specifying the queue name in the communication channel -
Thanks...

How to re-use one SOAP Sender Channel for two different messages?

Similar Messages

Maybe you are looking for