JDBC Sender Conversion error

Hi
My Scenario is JDBC Sender-> XI ->IDOC.
I have written a following select querry and update but I am getting and error from sender...
select * from bi5filmm.bsimhp
UPDATE HMPRCFG SET VALUE = 'P' from bi5filmm.bsimhp
Error during conversion of query result to XML: java.lang.IllegalArgumentException: Unsupported date format!
Please help....
Regards
Ria

Hi VJ,
Data looks like this......
State Market Channel Corp   Channel                Week        Product           Article      Outlet   Delivery
Code   Code    Code     Group ID                     Ending                                     Name     Loc
                        Code
NSW     A        C      AC    05NSW                  2007-12-21 0026                   26   2,320,736     NP
NSW     A        C      AC    05NSW                  2007-12-21 0026                   26   2,312,091     NP
NSW     A        C      AC    05NSW                  2007-12-21 0026                   26   2,503,996     NU
NSW     A        C      AC    05NSW                  2007-12-21 0026                   26   2,287,125     NY
NSW     A        C      AC    05NSW                  2007-12-21 0026                   26   2,696,852     QF
NSW     A        C      AC    05NSW                  2008-01-04 0026                   26   2,280,281     NL
NSW     A        C      AC    05NSW                  2008-01-04 0026                   26   2,290,131     NN
NSW     A        C      AC    05NSW                  2008-01-11 0026                   26   2,172,753     NA
NSW     A        C      AC    05NSW                  2008-01-11 0026                   26   2,189,592     NA
NSW     A        C      AC    05NSW                  2008-01-11 0026                   26   2,180,110     NA
NSW     A        C      AC    05NSW                  2008-01-11 0026                   26   2,165,458     NA
NSW     A        C      AC    05NSW                  2008-01-11 0026                   26   2,277,061     NI
Deliv   Load       Deliv   MNEPRCSTA Delivery    Checkout    Checkout   Load    PRMS
    Date    No         Date               Date        Date        Time       Origin UserID
    Act
1,071,218   BL202 1,071,218      INF     2007-12-18 2007-12-17    55,109      1    71218BL202
1,071,219   DU303 1,071,219      INF     2007-12-19 2007-12-18    55,908      1    71219DU303
1,071,219   BCSN2 1,071,219      INF     2007-12-19 2007-12-18    55,919      1    71219BCSN2
1,071,218   WA202 1,071,218      INF     2007-12-18 2007-12-17    55,103      1    71218WA202
1,071,218   Q2002 1,071,218      INF     2007-12-18 2007-12-17    55,056      1    71218Q2002
1,080,103   TSD30 1,080,103      INF     2008-01-03 2008-01-02    63,235      1    80103TSD30
1,080,103   P3001 1,080,103      INF     2008-01-03 2008-01-02    63,236      1    80103P3001
1,080,109   R4301 1,080,109      INF     2008-01-09 2008-01-08    60,422      1    80109R4301
1,080,109   R4301 1,080,109      INF     2008-01-09 2008-01-08    60,422      1    80109R4301
1,080,109   R4302 1,080,109      INF     2008-01-09 2008-01-08    60,422      1    80109R4302
1,080,110   R5412 1,080,110      INF     2008-01-10 2008-01-09    63,601      1    80110R5412
1,080,108   N2002 1,080,108      INF     2008-01-08 2008-01-07    60,712      1    80108N2002
Checkout              CheckIn   Create       Create   Week     Proc           Proc   Proc
Qty                   Qty       Date         Time     Period   Date           Time   Flag
                                                                                1.0000                .0000   2007-12-17 224,850            2008-12-16        0
1.0000                .0000   2007-12-18 205,817            2008-12-16        0
1.0000                .0000   2007-12-18 205,817            2008-12-16        0
2.0000                .0000   2007-12-17 224,850            2008-12-16        0
1.0000                .0000   2007-12-17 224,850            2008-12-16        0
1.0000                .0000   2008-01-02 211,104            2008-12-16        0
1.0000                .0000   2008-01-02 211,104            2008-12-16        0
1.0000                .0000   2008-01-08 212,952            2008-12-16        0
1.0000                .0000   2008-01-08 212,952            2008-12-16        0
1.0000                .0000   2008-01-08 212,952            2008-12-16        0
1.0000                .0000   2008-01-09 211,624            2008-12-16        0
1.0000                .0000   2008-01-07 214,424            2008-12-16        0
Regards
Hema

Similar Messages

JDBC Sender Adapter Error

HI Friends,
I have configured the JDBC Sender Adapter with parameters as
Driver : oracle.jdbc.driver.OracleDriver
Connection : jdbc:oracle:thin:system:netweaver:@172.25.4.221:1521
But Iam getting an error in Componenet Monitoring:
History:
- 2006-05-30 04:55:36 UTC: Error: Stopped unexpectedly - reconfigure and activate to continue processing. Error: java.lang.NullPointerException
- 2006-05-30 04:55:36 UTC: Processing started
How to resolve this??
Regards,
Raju

Hi
Thanks for the reply.
I tried with jdbc:oracle:thin:@172.25.4.221:1521:netweaver and
jdbc:oracle:thin:@172.25.4.221:1521:system
Now Iam getting another error.
Sender Adapter v2108 for Party '', Service 'TBIT40_XI_LEGACY_BS_04':
Configured at 2006-05-30 05:12:30 UTC
History:
- 2006-05-30 05:13:00 UTC: Retry interval started. Length: 20.000 s
- 2006-05-30 05:13:00 UTC: Error: Accessing database connection 'jdbc:oracle:thin:@172.25.4.221:1521:system' failed: DriverManagerException: Cannot establish connection to URL 'jdbc:oracle:thin:@172.25.4.221:1521:system': SQLException: Io exception: Connection refused(DESCRIPTION=(TMP=)(VSNNUM=153093376)(ERR=12505)(ERROR_STACK=(ERROR=(CODE=12505)(EMFI=4))))
- 2006-05-30 05:13:00 UTC: Processing started
Can U please solve it..
regards,
Raju

JDBC Sender Adapter error locking issue

Hi ,
Getting error:
Database-level error reported by JDBC driver while executing statement 'UPDATE OrdersTo_SAP SET Read_By_PI_Fl ='P' WHERE Read_By_PI_Fl is null'. The JDBC driver returned the following error message: 'com.microsoft.sqlserver.jdbc.SQLServerException: Transaction (Process ID 117) was deadlocked on lock | communication buffer resources with another process and has been chosen as the deadlock victim. Rerun the transaction.'. For details, contact your database server vendor
I have increased the time out period also changed the isolation level to serializable but no result. Channel is getting the error very frequently.
Can any one please look into the error.
Thanks,
Swapnashree

Hi Swapnashree - Are there multiple sources which will update this table? or just PI?
How many server nodes you have?
However when i search in Microsoft forums, i found the below. Please share it with your DBA to investigate further..
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/194f18b0-03b2-4e8f-8c67-5c92373c3efd/transaction-process-id-135-was-deadlocked-on-lock-resources-with-another-process-and-has-been?forum=sqlintegrationservices
http://technet.microsoft.com/en-us/library/aa213030(v=sql.80).aspx
Transaction (Process ID 51) was deadlocked on lock resources with another process and has been chosen as the deadlock vi…

JDBC sender adapter outofmemory error

Dear friends,
We are getting following error on JDBC sender Adapter: Error during conversion of query result to XML: java.lang.OutOfMemoryError: Java heap space (failed to allocate 1073741848 bytes)
I have read blogs where there have been suggestions to limit the amount of data picked by using WHERE condition and not using SELECT *
In our scenario we are creating GL IDOCs . In SQL when PI picks it up it needs to get all the corresponding Header and line items together. We cannot randomly pick 1000 records at a time. The SQL table has 500,000 rows in the following format
H H H L1 L1 L1
H H H L2 L2 L2
H H H L3 L3 L3
H1 H1 H1 L1 L1 L1
H1 H1 H1 L2 L2 L2
H1 H1 H1 L3 L3 L3
Please let me know how can we solve this issue?
Thank you,
Teresa
Edited by: Teresa lytle on Sep 27, 2011 3:13 PM

If you are using oracle database, uses ROWNUM field to fetch first set of records and you can update those records with the flag as true.
similarly If you are using MS SQL database, uses SELECT TOP command to fetch first set of records and you can update those records with the flag as true.
Like File/FTP adapter, the next poll interval would be as scheduled. The Administrator can then alter the table contents, to ensure lesser no of records are picked up.
Here You need to limit the no of rows if you again face the problem. Please chec the SAP Note
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1296819

Avoid JDBC sender error: Execute statement did not return a result set

Hi!
My JDBC sender adapter towards MS SQL server works fine, with an Execute statement calling a stored procedure that returns the source data needed. The stored procedure itself updates the status of database table records, so that only the unread records are returned each time the stored procedure is called.
However, the communication channel monitoring sets a red flag for the JDBC sender adapter, when there are no values to fetch from the database table (using the stored procedure). Message says: "Database-level error reported by JDBC driver while executing statement 'EXECUTE FetchMessage 1, 9000'. The JDBC driver returned the following error message: 'com.microsoft.sqlserver.jdbc.SQLServerException: The statement did not return a result set.'. For details, contact your database server vendor."
This is not an error situation, as I do not expect there to be any values to fetch from the database at all times.
I do not see how to change the stored procedure to avoid this error.
Is there a parameter to be set on the JDBC adapter that I can use, so the red flag is avoided?
Thanks for any input!
Regards,
Oeystein Emhjellen

Hi Oeystein Emhjellen.
The problem is Store Procedure that has to generate always a ResultSet (or cursor). If it doesn't have a output, you have to generate an Empty ResultSet.
Like a SELECT Statement:
If there are data, SELECT get an output result but if it get nothing the SELECT Statement get a empty ResultSet.
Ask to your database team.
I hope it helps you.
Bruno.

Sender file adapter conversion Error!!

Hello every one....
I am stuck with a problem...in my scenario,, there are possiblities that file may contain more than required paramters... in such case,,, paramters defined in conversion should go ahead and others should be ignored...
for this very purpose i added the paramter:
row.fieldSeparator                 ,
row.fieldNames                     orderno,authcode,status
row.endSeparator                  'nl'
row.additionalLastFields      ignore
the scenario works fine if the file contains thrree comma separated values but it raises an error if no of paramters increase as :
Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR converting
document line no. 1 according to structure 'row':java.lang.Exception: ERROR in configuration: more
elements in file csv structure than field names specified!
we are using PI 7.... does it require some more configuration in additoin to paramter row.additionalLastFields
any help in this regard would be highly appreciated...
thanx

this parameter is already set, and this is the exact behavior i want from adapter engine... but the problem
here is different... the exception is raised at communication channel's conversion routine level,,, the retry
interval is not the one defined in visual admin but infact the interval (polling) time defined in communication
channel.... the system does'nt stop after 3 attempts,, but infact keep on trying to read it....
one peice of information i have found is in sap note:821267 , which states:
*Q35:*
Q: I have configured a File Sender channel with File Content
Conversion or a custom-developed module, which may throw an
exception. When the File Adapter encounters an invalid file, which
triggers a conversion error or an exception in a module, the
adapter will enter a retry interval and upon each following
processing attempt try to process the faulty file. This basically
prevents the File Adapter from picking up files that are located
after the fauilty file according to the configured sort order. How
can I change this behavior?
o A: This is by design. When the File Adapter encounters an invalid
file, manually remove this file from the configured source
directory. You can configure an alerting rule to get notified each
time this occurs.
We are currently evaluating possible solutions that could be used
to skip this manual interaction.
now can there be a way around to make communication channel read the file only 3 times (value defined in adapter engine profile in visual admin)
I have thaught of writing of module.... but the error is raised even before calling module !!
any further clue ???

JDBC Sender Error

Hi,
We have a JDBC Sender adapter configured to pull data from the SQL database. This pulls data for every one hour.
Some times we are getting the below error on the communication channel -
Database-level error reported by JDBC driver while executing statement 'select * from HR_ExitEvents'. The JDBC driver returned the following error message: 'com.microsoft.sqlserver.jdbc.SQLServerException: An exception occurred during the DBComms.receive method. Operation:Connection reset. Context:(12) [XI JDBC2XI[CC_JDBC_out_HRExitEvents/EMSSQLServer2005/]_15550, IO:a82f3, Dbc:9b28b]. PktNum:0. TotalReceived:0. PktSize:4,096.'. For details, contact your database server vendor.
Please help.

Hi Sudeer
This is a general error message that is raised whenever the SQL server forcibly closes the TCP/IP connection for any of a number of reasons while the driver is waiting for a response to a query.
This error indicates that the connection with the server has been reset for some reason. The actual cause of the failure could be anything from network (hardware) issues to a problem in either SQL Server or the JDBC driver or any software in between like firewall
Thanks
Abhishek

JDBC Sender Error: Incorrect Pollin Interval

Hi,
I have a problem with my JDBC Sender. It used to work perfectly. Then, it got an error. After that, I tried to re-start the CC in RWB. Here is the result in RWB after i restart.
http://www.imagecross.com/02/image-hosting-view-03.php?id=4564sample1.png
The time is incorrect. I set polling interval in my ID as 5 seconds and retry interval as 10 seconds but in RWB it shows that polling interval is 12 seconds which I don't know where it comes from. Moreover, in RWB my CC show only message "Processing started" which is different from the time it worked that it also has a message showing interval time like this http://www.imagecross.com/02/image-hosting-view-03.php?id=5434sample2.png
Besides, No data in my database can be retrieved by SAP XI.
Have anyone experience this before? Any suggestion please?
Thanks,
Pavin

Hi
Once Deactivate and again Activate your CC.
Check your generated SQL query format is correct
At runtime you can find the genereated sql statements by doing configuraitons in Receiver JDBC adapter.
In the JDBC Receiver adapter you have the Advanced Properties .
Over there enter the following
left column logSQLStatement
right column true
To see the query created ..
Login to adapter monitoring ..select the relevant jdbc adapter.
Now when any message is processed by the jdbc adapter in adapter monitoring at that time you will see a message link. When you click on that link a new window will open. In that window if you click on page down you will get to see the sql statement generated by the jdbc adapter.

Send custom error message using IDoc conversion rule?

Hello,
I am using an Idoc conversion rule in BD79 to load cost centers. In my conversion rule I use a conversion exit function module to concatenate 2 specific characters and sending cost center value together and then this output value placed in the receiving cost center field. This works fine, but now I want to send a custom error message to the idoc and fail the idoc if the sending cost center value is greater than 8 digits.
Does anyone know how to send an error message or update an idoc with an error message using a conversion rule (bd79)?
Thank you,
Rhonda

Hi Rhonda,
Any luck on the below.. i have a similar issue...
Sorry to hijack your thread...

RSWUWFML2 - CONVERSION ERROR sending workitem out via SCOT

Hi there,
Please help, I am using report RSWUWFML2 to send workitems to outlook, the email gets to outlook but it seems like there is a CONVERSION error that occurs in SAP that results in no workitem ATTACHMENT being in the email.
The error in the email is: "Message cannot be processed as it cannot be converted"
I turned on the trace in SCOT and this is the log....look at the sections in BOLD to see what happened:
SX_PERFORM_RFCSEND G Formats supported: ALI INT OBJ OTF PDF RAW SCR URL 
SX_OUTGOING_VERSION_BUILD G Read contents of document RAW32000000034669
SO_OBJECT_DATA_FOR_SEND_GET G Object transferred
SX_OUTGOING_VERSION_BUILD G Converting document RAW32000000034669 from TXT to INT SX_OUTGOING_VERSION_BUILD G Read contents of document EXT32000000011065
SO_OBJECT_DATA_FOR_SEND_GET G Object transferred
SX_OUTGOING_VERSION_BUILD G No suitable conversion found for SAP SX_GENERATE_NDR G Message cannot be processed as it cannot be converted 
My apologies for the bad formatting above, was the best I could do from copy and paste from SCOT....
I have also looked at the "conversion rules" in SCOT.....could this be the problem? It seems to want to convert type "SAP" to something.....but there is no "SAP type" in the conversion rules?
PLEASE help, I really need to get over this obstacle
Thanks
Lynton

Not sure if this will confuse matters more but if I look in the LOGS further in transaction SLG1 I see the following:
Typ Message text
Selection Setting: p_jobsuf = 2
 Selection Setting: p_tasks = TS00007986
 Selection Setting: x_sc_inb =
 Selection Setting: x_sc_dis =
 Selection Setting: x_sc_exe = X
 Selection Setting: p_s_nac = SWU_NOTIF
 Selection Setting: p_s_nan = 002
 Selection Setting: p_prol = SWU_NOTIF_PROLOG1
 Selection Setting: p_epil = SWU_NOTIF_EPILOG2
 Selection Setting: p_logon =
 Selection Setting: p_fromd = 03.12.2007
 Selection Setting: p_fromt = 08:00:00
 Selection Setting: p_user =
 Selection Setting: x_err_tr =
 Selection Setting: x_alw_tr = X
 Work item 000001389473 being edited
 SAPoffice document RAW32000000034669 sent
 Work item 000001389473: Send ok
 Work item 000001389473 sent to [email protected]
So this log looks fine BUT the previous trace from SCOT looks bad.....
Any ideas?
Lynton

JDBC Sender adapter - Oracle - Stored Procedure - Error

Hello,
Need few clarifications on JDBC sender adapter and stored procedures when connecting to Oracle DB.
My scenario is, Oracle to SAPBW. So in sender JDBC adapter, we have used a SP having multiple SQL statements it, esp. one of the SELECT statment having Joins on a table and View.
My questions are,
1) Is it possible to have more SQL statements in SP for Sender JDBC?
2) Is the SP of Oracle DB returns resultset or cursor?
I have tried in searching the forum perticularly for connecting to Oracle as Sender and below like said that there is a limitation of XI JDBC when connecting to Oracle.
Executing an Oracle Stored Procedure from Sender JDBC adapter
So please clarify the doubts and help me.
With regards,
Jilan

Hi Jilan,
Unlike what was mentioned in the link given by you that oracle returns cursor and not resultset is not completely true. It may be difficult but certainly not impossible.
Refer : http://www.enterprisedt.com/publications/oracle/result_set.html
regards
joel

ResultSet XML Conversion Error

Hi,
BPEL, SOA 11g, DB2 Stored procedure,
In a BPEL service I am getting this error while invoking a DB2 Stored procedure with Strong XSD. I am using assign to copy the input parameter to the input parameters of Stored procedure.
not able to figure out why this error message is coming.
java.lang.Exception: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'JDE_DBA' failed due to: ResultSet XML Conversion Error. An error occurred while converting from a ResultSet to XML. Unable to convert a ResultSet to XML. Cause: java.lang.NullPointerException ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:575) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:381) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:298) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.sun.el.parser.AstValue.invoke(AstValue.java:157) at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283) a
---------------- BPEL Code --------
<?xml version = "1.0" encoding = "UTF-8" ?>

<process name="UPCMatchOrder"
targetNamespace="http://xmlns.oracle.com/CD_JDE_Application_jws/JDE_UPCMatchOrder/UPCMatchOrder"
xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:client="http://xmlns.oracle.com/CD_JDE_Application_jws/JDE_UPCMatchOrder/UPCMatchOrder"
xmlns:ora="http://schemas.oracle.com/xpath/extension"
xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:ns1="http://xmlns.oracle.com/pcbpel/adapter/db/CD_JDE_Application/JDE_UPCMatchOrder/JDE_DBA"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:ns2="http://xmlns.oracle.com/pcbpel/adapter/db/QAMODA73/X56714P/">

<partnerLinks>

<partnerLink name="upcmatchorder_client" partnerLinkType="client:UPCMatchOrder" myRole="UPCMatchOrderProvider"/>
<partnerLink name="JDE_DBA" partnerRole="JDE_DBA_role"
partnerLinkType="ns1:JDE_DBA_plt"/>
</partnerLinks>

<variables>

<variable name="inputVariable" messageType="client:UPCMatchOrderRequestMessage"/>

<variable name="outputVariable" messageType="client:UPCMatchOrderResponseMessage"/>
<variable name="Invoke_1_InputVariable" messageType="ns1:args_in_msg"/>
<variable name="Invoke_1_OutputVariable" messageType="ns1:args_out_msg"/>
</variables>

<sequence name="main">

<receive name="receiveInput" partnerLink="upcmatchorder_client" portType="client:UPCMatchOrder" operation="process" variable="inputVariable" createInstance="yes"/>

<assign name="Assign_3">
<copy>
<from variable="inputVariable" part="InputMessage"/>
<to variable="Invoke_1_InputVariable" part="InputParameters"/>
</copy>
</assign>
<invoke name="Invoke_1" inputVariable="Invoke_1_InputVariable"
outputVariable="Invoke_1_OutputVariable" partnerLink="JDE_DBA"
portType="ns1:JDE_DBA_ptt" operation="JDE_DBA"/>
<assign name="Assign_2">
<copy>
<from variable="Invoke_1_OutputVariable" part="OutputParameters"/>
<to variable="outputVariable" part="OutputMessage"/>
</copy>
</assign>
<reply name="replyOutput" partnerLink="upcmatchorder_client" portType="client:UPCMatchOrder" operation="process" variable="outputVariable"/>
</sequence>
</process>
Regards,
-CD

Hi Sanjay,
The JDBC sender adapter returns the rows selected from the database in the follwoing format.
<resultset>
<row>
<column-name1>column-value</ column-name1>
<column-name2>column-value</ column-name2>
<column-name3>column-value</ column-name3>
</row>
<row>
<column-name1>column-value</ column-name1>
<column-name2>column-value</ column-name2>
<column-name3>column-value</ column-name3>
</row>
</resultset>
This error occurs , when the source datatype you have created for the JDBC adapter does not match with this format. I would suggest that you check the source format along with the occurence of your field.
Regards,
Bhavesh

JDBC Sender Adapter : java.sql.SQLException: Cursor state not valid.

Hello all,
We have configured JDBC Sender Adapter which fetches around 10K records with poll interval 1hr from DB2 System .
It was working fine,suddenly it started throwing an exception in Adapter Monitoring :
Error during conversion of query result to XML: java.sql.SQLException: Cursor state not valid.
It is not fetching any records.
Without changing any configurations when we tried to fetch to around 1000 records it's working fine.
For 10K records same exception persists
What could be the reason ?How to resolve this issue?
regards
GangaPrasad

Hello Christophe ,
Trace in VA :::
Date : 05/09/2008
Time : 11:45:57:750
Message : Unexpected error converting database resultset to XML, reason: java.sql.SQLException: Cursor state not valid.
 at java.lang.Throwable.<init>(Throwable.java:194)
 at java.lang.Exception.<init>(Exception.java:41)
 at java.sql.SQLException.<init>(SQLException.java:40)
 at com.ibm.as400.access.JDError.throwSQLException(JDError.java:389)
 at com.ibm.as400.access.JDError.throwSQLException(JDError.java:366)
 at com.ibm.as400.access.AS400JDBCResultSet.getValue(AS400JDBCResultSet.java:3580)
 at com.ibm.as400.access.AS400JDBCResultSet.getString(AS400JDBCResultSet.java:3223)
 at sun.reflect.GeneratedMethodAccessor459222074.invoke(Unknown Source)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:309)
 at com.sap.aii.adapter.jdbc.sql.jdbctrace.TraceInvocationHandler.invoke(TraceInvocationHandler.java:45)
 at com.sap.aii.adapter.jdbc.sql.jdbctrace.$Proxy254.getString(Unknown Source)
 at com.sap.aii.adapter.jdbc.JDBC2XI.convert2XML(JDBC2XI.java:954)
 at com.sap.aii.adapter.jdbc.JDBC2XI.invoke(JDBC2XI.java:492)
 at com.sap.aii.af.service.scheduler.JobBroker$Worker.run(JobBroker.java:475)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:99)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:119)
Severity : Error
Category : /Applications/ExchangeInfrastructure/AdapterFramework/Services/ADAPTER/ADMIN/JDBC
Location : com.sap.aii.adapter.jdbc.JDBC2XI.convert2XML(ResultSet, ResultSetMetaData)
Application :
Thread : XI JDBC2XI[JDBC_SND_DB2_VehicleReceiving/DB2PRD00/]_170
Datasource : 12428950:/usr/sap/PXI/DVEBMGS01/j2ee/cluster/server0/log/applications/com.sap.xi/xi.log
Message ID : 00145E742794005E0014980B000000BE00044CC763766C4F
Source Name : /Applications/ExchangeInfrastructure/AdapterFramework/Services/ADAPTER/ADMIN/JDBC
Argument Objs : java.sql.SQLException: Cursor state not valid.
 at java.lang.Throwable.<init>(Throwable.java:194)
 at java.lang.Exception.<init>(Exception.java:41)
 at java.sql.SQLException.<init>(SQLException.java:40)
 at com.ibm.as400.access.JDError.throwSQLException(JDError.java:389)
 at com.ibm.as400.access.JDError.throwSQLException(JDError.java:366)
 at com.ibm.as400.access.AS400JDBCResultSet.getValue(AS400JDBCResultSet.java:3580)
 at com.ibm.as400.access.AS400JDBCResultSet.getString(AS400JDBCResultSet.java:3223)
 at sun.reflect.GeneratedMethodAccessor459222074.invoke(Unknown Source)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:309)
 at com.sap.aii.adapter.jdbc.sql.jdbctrace.TraceInvocationHandler.invoke(TraceInvocationHandler.java:45)
 at com.sap.aii.adapter.jdbc.sql.jdbctrace.$Proxy254.getString(Unknown Source)
 at com.sap.aii.adapter.jdbc.JDBC2XI.convert2XML(JDBC2XI.java:954)
 at com.sap.aii.adapter.jdbc.JDBC2XI.invoke(JDBC2XI.java:492)
 at com.sap.aii.af.service.scheduler.JobBroker$Worker.run(JobBroker.java:475)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:99)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:119)
Arguments : java.sql.SQLException: Cursor state not valid.
 at java.lang.Throwable.<init>(Throwable.java:194)
 at java.lang.Exception.<init>(Exception.java:41)
 at java.sql.SQLException.<init>(SQLException.java:40)
 at com.ibm.as400.access.JDError.throwSQLException(JDError.java:389)
 at com.ibm.as400.access.JDError.throwSQLException(JDError.java:366)
 at com.ibm.as400.access.AS400JDBCResultSet.getValue(AS400JDBCResultSet.java:3580)
 at com.ibm.as400.access.AS400JDBCResultSet.getString(AS400JDBCResultSet.java:3223)
 at sun.reflect.GeneratedMethodAccessor459222074.invoke(Unknown Source)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:309)
 at com.sap.aii.adapter.jdbc.sql.jdbctrace.TraceInvocationHandler.invoke(TraceInvocationHandler.java:45)
 at com.sap.aii.adapter.jdbc.sql.jdbctrace.$Proxy254.getString(Unknown Source)
 at com.sap.aii.adapter.jdbc.JDBC2XI.convert2XML(JDBC2XI.java:954)
 at com.sap.aii.adapter.jdbc.JDBC2XI.invoke(JDBC2XI.java:492)
 at com.sap.aii.af.service.scheduler.JobBroker$Worker.run(JobBroker.java:475)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:99)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:119)
Dsr Component :
Dsr Transaction : d1f629d01d9b11dd984200145e742794
Dsr User :
Indent : 0
Level : 0
Message Code :
Message Type : 1
Relatives : com.sap.aii.adapter.jdbc.JDBC2XI
Resource Bundlename :
Session : 0
Source : /Applications/ExchangeInfrastructure/AdapterFramework/Services/ADAPTER/ADMIN/JDBC
ThreadObject : XI JDBC2XI[JDBC_SND_DB2_VehicleReceiving/DB2PRD00/]_170
Transaction : SAP J2EE Engine JTA Transaction : [0ffffffbdffffffa6ffffff960086]
User : J2EE_GUEST
Regards
Ganga Prasad

JDBC sender adapter - driver problems

Hi.
Iu2019m struggling with a little problem regarding the JDBC sender adapter, querying an Oracle database.
Iu2019m making a simple SELECT statement, where one of the fields is of the typeu201DTIMESTAMP(0) WITH LOCAL TIMEu201D.
Making the query in a SQL client works just fine, but in the JDBC sender adapter, it generates this error u201DError during conversion of query result to XML: java.sql.SQLException: Session Time Zone not set!u201D
Iu2019ve searched for answers on numerous forums, and found one place, where the following where the solution:
>>> Hi. The issue is that the driver itself needs to have a time zone
>>> set. You have to call setSessionTimeZone() on the connection object.
Unfortunately it is a bit hard to call this function in the adapter.
Any of you guys have an idea what to do?
I can add, that making a query, where no date fields are selected, works fine in the adapter.
Regards...
Peter

Problem solved...
Put a conversion (CONCAT, SUBSTR, TO_CHAR, etc.) around the date field you are about to fetch, and it works just fine.

JDBC send data to oracle, oracle only accept column name in Upper case

Hi experts,
I am doing a scenario File --> XI --> JDBC, JDBC send data to a Oracle 10g database, I have configured JDBC receiver to use XML-SQL format. in oracle database , table "EMPLOYEE" has a column "NAME", but when I send data to oracle using JDBC receiver, the column is "name", then XI complains
" 'EMPLOYEE' (structure 'insert'): java.sql.SQLException: FATAL ERROR: Column 'name' does not exist in table 'EMPLOYEE'.
can anyone help me to let oracle accpet column "name". I can't change colum in JDBC receiver from "name" to "NAME".
Thanks a lot.

can anyone help me to let oracle accpet column "name"
Making Oracle case insensitive is not possible (in my opinion). By default all object names are stored in UPPER case in the rdbms dictionary.
When XI searches for column name in Oracle, this search is case sensitive. So u have to configure accordingly.
Regards,
Prateek

JDBC Sender Conversion error

Similar Messages

Maybe you are looking for