JDBC SQL Server Channel Calling Stored Procedure Won't Return Result Set

Good afternoon, Experts
We're calling a stored procedure in a sender communcation channel. I can perform any SQL SELECT statement here, but for some reason when I execute the SP (EXECUTE StoredProcedureName) The Adapter Engine returns the following:
Database-level error reported by JDBC driver while executing statement 'DECLARE @UpdateRecords bit SET @UpdateRecords = 0 EXECUTE ExportToSAP @UpdateRecords'. The JDBC driver returned the following error message: 'com.microsoft.sqlserver.jdbc.SQLServerException: The statement did not return a result set.'. For details, contact your database server vendor.
Even stranger yet is is that this works just fine on our PI-DEV system. I created an identical communication channel connecting to the same database with the same UID and PWD and it won't work in PI-QAS.
Any help/ideas you could share would be greatly appreciated!!!
Thanks,
Chad

Hi Chad.
Normally, itu2019s a problem with your procedure. The Store Procedure is wrong and something is different between your DEV environment and QAS environment.
Try to ask to DB team check it.
Regards,
Bruno

Similar Messages

Conversion of java Array to oracle SQL Array while calling Stored Procedure

How java Array can be converted to oracle SQL array while calling Stored procedure with callable statement.
i.e java Array ---> Sql Array in Oracle while setting the datatypes to callable statement arguments.

Look at:
http://forum.java.sun.com/thread.jsp?forum=48&thread=376735&tstart=0&trange=15
Paul

SOAP TO JDBC scenario: calling stored procedure which will return the value

Hi
I have Soap To Jdbc scenario in which I am going to call the Stored Procedure at target side which will be executed and it is going to return the result set .
Result contains following values.
return code as ( 0 Or 1) and also specific exception message if its return code as 1.
Could you suggest me the way by which I can handled this return code and send it back to the Sap PI system then the same thing is directed the to SMTP server for sending mail to consern person.
Regards
Kumar

The OUT parameters of stored procedure will be returned as response. Where exactly are you facing the proble? Here is a complete walkthourgh
/people/luis.melgar/blog/2008/05/13/synchronous-soap-to-jdbc--end-to-end-walkthrough
In your case, you don't want response at sender. Instead you want to mail it. For this you may use BPM to design your scenario with following steps
Receive (to receive data from sender)
Send Sync (to stored procedure and get response)
Send Async (to mail receiver)
Regards,
Prateek

Send SQL query or call stored procedure, which is best???

hello experts!!
i would like to ask what will be the best implementation on querying a database using Java, send a SQL query(insert into table values...) or call stored procedure(just pass parameters)?? and also in stored procedure does "autoCommit/rollback" applies/make sense??

I searched google for this:
Stored Procedures vs. SQL
and found this useful link:
http://www.karlkatzke.com/stored-procedures-vs-sql-calls/
I thiink you should also read up on other articles based on such google searches
to get other opinions. Also, read the links provided by that article.
Personnally, I think stored procedures should be avoided unless there is a definite
advantage as specified in the above article. Especially not used for CRUD operations.
Also, no matter where you put the SQL, it should be documented. I've seen too many stored procedures that aren't documented.

Stored Procedure in Universe - Multi-result set

I have been trying to get more information on stored procedures as a source for universes. Business Objects designer 3.1 documentation says the following
Stored procedures with multi-result set
Example: A stored procedure that returns more than one result set. At design
time, several tables are created in the universe structure based on the same
stored procedure.
Does this mean?
1. These result sets are shown as multiple tables in designer?
2. if so, can these result sets be used as regular tables in designer to build joins and contexts.
I searched the forum for relevant threads before posting but could not find any. I tried posting this thread earlier - internet connection timed out. Please forgive me if this is a duplicate post.
Thanks

DROP TABLE #DescendantsMS SQL Server - right?
Then don't drop the table.
From the MS docs for "create table"
Local temporary tables are visible only in the current session;
A local temporary table created in a stored procedure is dropped automatically when the stored procedure completes. The table can be referenced by any nested stored procedures executed by the stored procedure that created the table. The table cannot be referenced by the process which called the stored procedure that created the table.

How to use stored procedure with many return results and variable with perl

Hi everybody,
i´m writtting now a Perl programm, wich use a oracle stored procedure with more than 1 result and 1 variable(I have to return 2 variable fpr each result). I don´t now how I can get it.I already search the web but I didn´t find.
My example:
PROCEDURE get_projects_and_sub_projects (
v_project_id IN INTEGER,
v_project_c_id OUT INTEGER,
v_project_id_find OUT VARCHAR2
IS
BEGIN
SELECT c_id, proj_id
INTO
v_project_c_id,
v_project_id_find
FROM t_projet
WHERE t_projet .ksa_pro_art_kbz = 'KU'
AND t_projet.proj_id LIKE v_project_id || '%';
EXCEPTION
WHEN NO_DATA_FOUND
THEN
v_project_c_id := NULL;
v_project_id_find := NULL;
WHEN OTHERS
THEN
kmessages.error (NULL,
'get_projects_and_sub_projects',
'Project-Name: ' || v_project_id,
'Errornumber: '
|| SQLCODE
|| ' Error: '
|| SQLERRM,
TRUE,
TRUE
raise_application_error (-20001,
'Error '
|| SQLCODE
|| ' get_projects_and_sub_projects: '
|| SQLERRM,
TRUE
END get_projects_and_sub_projects;
in Perl Program:
sub get_projects_unterprojects_name($$){
my ($db_handle, $proj_name_id) = @_; #$db_handle ist the DB Connection return value
my $db_proj_c_id;
my $db_proj_name;
eval{ my $csr = $db_handle->prepare(q{
BEGIN
pro_doc_ber.get_projects_and_sub_projects(:proj_name_id, :db_proj_c_id, :db_proj_name);
END;
# parameter value
$csr->bind_param(":proj_name_id", $proj_name_id);
# return values
$csr->bind_param_inout(":db_proj_c_id", \$db_proj_c_id, 11);
$csr->bind_param_inout(":db_proj_name", \$db_proj_name, 20);
$csr->execute(); };
But this didn´t work. Could somebody give me some idea?
Thank you
Felx

Some additional info would probably be helpful.
What is your programming enviironment? Java?
In any case I suspect that you will need to use the OCI to deal with specific Oracle types such as user defined object types -- thats not standard ANSI SQL.
In Java I believe you need to use OPAQUE, there are some examples out there. I'm mostly a PL/SQL developer with some Java expereince so others here are more qualifed to answer your question more directly.

SQL Server 2012: Import and Export Wizard - Exporting Multiple Result Sets at Once?

I'm working in SQL Server 2012 trying to export some data from our database into an Excel file. My SQL statement has two separate Select statements. They are not joined by a union. When I Execute them inside of SQL Server Management Studio, with Results
set to go to a Grid, I get two result sets back. Two full tables of data.
However, when I use the Import and Export Wizard, the Excel sheet only has the first set of data.
What do I need to do to have it so both result sets show up in the excel file?

Why cant use merge them using union/union all if intention is to get them to same sheet? Is it like the metadata is different so that they cant be merged to single sheet?
If that being the case you need to do it in two steps.
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Creation of DB Adaptert for calling stored procedure in MS SQL server

Hi,
I need to create a DB adapter to call a stored procedure in MS SQL Server.
I have gone thru the thread MS SQL Server database connection
It mentions that we need to use a command line utility for generating the wsdl and xsd for calling stored procedures in MS SQL server. Please provide information where to find this utility and how to use it.
Any links to tutorials are welcome.
Thanks !!.
Silas.

Command line is required for stored procedures, if you are using the basic options you don't need to worry.
(1) Download MS SQL Server 2005 JDBC Driver from Microsoft Site. http://msdn.microsoft.com/en-us/data/aa937724.aspx
(2) The download is self extracting exe file. Extract this into Program Files on your machine. It should create folder as "Microsoft SQL Server 2005 JDBC Driver"
(3) In above mentioned folder search for sqljdbc.jar copy this file into JDeveloper\JDBC\lib folder.
(4) Open JDeveloper/jdev/bin/jdev.conf file add following entry.
AddJavaLibPath C:/Program files/Microsoft SQL Server 2000 Driver for JDBC/lib
While executing this step make sure that your JDeveloper is closed.
(5) On command prompt go to J Developer folder and execute following command
jdev -verbose
This will open JDeveloper.
(6) Now go to JDeveloper > Connections > Database Connections > New Database Connection
(7) Select Third Party JDBC
(8) Specify MS Sql Server User Name, password and Role.
(9) In connection page specify following
- Driver Class: com.microsoft.sqlserver.jdbc.SQLServerDriver
- For class path browse to C:/Program files/Microsoft SQL Server 2000 Driver for JDBC/lib folder, select sqljdbc.jar add it as library.
- Specify URL as following.
jdbc:sqlserver://SERVERNAME:1433;databaseName=MSSQLDBNAME;
(10) Go to Test page and test it.
cheers
James

Weird Problem calling Stored Procedure using JDBC

Scenario is..
I have J2EE application and calling stored procedure using JDBC.
My application connects to instance "A" of testDB.
Schema "A" does NOT own any packages/procedure but granted execute on oracle packages/procedures that reside in schema "B" of testDB.
In java code I call procedure(proc1) in package(pac1) which internally calls procedure(proc2) in package(pac2).
The problem occurs when procedure pac2.proc2 is modified. After the modification, my java code fails and throws an exception "User-Defined Exception" and I am also getting "ORA-06508: PL/SQL: could not find program unit being called". This clears up only if I bounce the web container. (This doesn't happen if I modify pac1.proc1 and run my application)
Has any one faced this problem? Please suggest if any thing can be changed in jdbc code to fix this problem.
Thanks

Hi,
I assume these are PL/SQL packages and that the changes are made at the package specification level?
If so, it looks like you are hitting the PL/SQL dependencies rules. In other words, if the spec of proc2 is changed, then proc1 is invalidated, since proc1 still depends on the old version of proc2's spec. As a result, if you try to run proc1, its spec must either be explicitly rewritten before it could run again or implicitly recompiled first, if the (implicit) recompilation fails, it won’t run.
Kuassi http://db360.blogspot.com

Calling Stored Procedure from Oracle DataBase using Sender JDBC (JDBC-JMS)

Hi All,
We have requirement to move the data from Database to Queue (Interface Flow: JDBC -> JMS).
Database is Oracle.
*Based on Event, data will be triggered into two tables: XX & YY. This event occurs twice daily.
Take one field: 'aa' in XX and compare it with the field: 'pp' in YY.
If both are equal, then
if the field: 'qq' in YY table equals to "Add" then take the data from the view table: 'Add_View'.
else if the field: 'qq' in YY table equals to "Modify" then take the data from the view table: 'Modify_View'.
Finally, We need to archive the selected data from the respective view table.*
From each table, data will come differently, means with different field names.
I thought of call Stored Procedure from Sender JDBC Adapter for the above requirement.
But I heard that, we cannot call stored procedure in Oracle through Sender JDBC as it returns Cursor instead of ResultSet.
Is there any way other than Stored Procedure?
How to handle Data Types as data is coming from two different tables?
Can we create one data type for two tables?
Is BPM required for this to collect data from two different tables?
Can somebody guide me on how to handle this?
Waiting eagerly for help which will be rewarded.
Thanks and Regards,
Jyothirmayi.

Hi Gopal,
Thank you for your reply.
>Is there any way other than Stored Procedure?
Can you try configuring sender adapter to poll the data in intervals. You can configure Automatic TIme planning (ATP) in the sender jdbc channel.
I need to select the data from different tables based on some conditions. Let me simplify that.
Suppose Table1 contains 'n' no of rows. For each row, I need to test two conditions where only one condition will be satisfied. If 1st condition is satisfied, then data needs to be taken from Table2 else data needs to be taken from Table3.
How can we meet this by configuring sender adapter with ATP?
================================================================================================
>How to handle Data Types as data is coming from two different tables?
If you use join query in the select statement field of the channel then whatever you need select fields will be returned. This might be fields of two tables. your datatype fields are combination of two diff table.
we need to take data only from one table at a time. It is not join of two tables.
================================================================================================
Thanks,
Jyothirmayi.

How to use @jws:sql call Stored Procedure from Workshop

Is there anyone know how to use @jws tag call Sybase stored procedure within
Workshop,
Thanks,

Anurag,
Do you know is there any plan to add this feature in future release? and
when?
Thanks,
David
"Anurag Pareek" <[email protected]> wrote in message
news:[email protected]..
David,
In the current release, we do not support calling stored procedures from a
database control. You will have to write JDBC code in the JWS file to call
stored procedures.
Regards,
Anurag
Workshop Support
"David Yuan" <[email protected]> wrote in message
news:[email protected]..
Anurag,
I know how to use DB connection pool and create a db control with it. In
fact, we have created a Web Service with the db control using plain SQL
in
@jws:sql. However, my question here is how to use @jws tag in Weblogic
Workshop to create a Web Services based on Sybase stored procedure orany
Stored Proc not plain SQL.
Thanks,
David
"Anurag Pareek" <[email protected]> wrote in message
news:[email protected]..
David,
You can use a database control to obtain a connection from any JDBC
Connection Pool configured in the config.xml file. The JDBC Connectionpool
could be connecting to any database, the database control is
independent
of
that.
Regards,
Anurag
Workshop Support
"David Yuan" <[email protected]> wrote in message
news:[email protected]..
Is there anyone know how to use @jws tag call Sybase stored
procedure
within
Workshop,
Thanks,

Calling Stored Procedure with TestStand to SQL 2000

When I run the Stored Procedure in the query analyzer it returns the recordset fine. I am not specifying any parameters. I am Using TestStand 2.01 and SQL Server 2000. I am using the OPEN SQL STATEMENT step to call the SP. When I run the SP in TestStand I get no data returned. If I run the SQL statment in TestStand I get the data that I am requesting. Does TestStand not support stored procedures.

Hi,
The instructions that I posted were for TestStand 3.0. In version 3.0 you can call stored procedures with input/output paramateres and to support this functionality the data operation step support several new modes.
TestStand 2.0.1 does not support parameters on stored procedures, but it does support calling stored procedures that do not take parameters. To be able to access the data back from the database you need to set the cursor location (in the Advanced tab of the Open SQL Statement step) to Client (http://digital.ni.com/public.nsf/websearch/0EF68BF97AB1A61F86256B8E007D70C0?OpenDocument).
By changing the cursor to Client I was able to succesfully call a stored procedure from TestStand 2.0.1 and to read back the recordse
t return by the database. Please let me know if you are still experiencing dificulties.
Best regards,
Alejandro del Castillo
National Instruments

JDBC performance calling stored procedures

Hi,
We have an java application which makes calls to PL/SQL stored procedures. We have one 'database server' component which handles all the database interaction, and other components which connect to it using CORBA.
The problem is that with everything running, certain queries are taking from 17 to 30 seconds to come back, but when you run the same sql from SQLPlus, you get the results back in about 2 seconds every time.
We're using a connection pool, but this doesn't seem to be the problem, as we put in diagnostics and it takes no time at all to get a free connection.
The time is taken up doing a getCursor() to get the result set back. We register the cursor as an output parameter, and open it from within the stored procedure.
Anyone any suggestions?
Thanks,
Neil.
null

Hi ,
You can call stored procedure using JPA (eclipselink API).Below is the sample code
ReadAllQuery readAllQuery = new ReadAllQuery(Employee.class);
call = new StoredProcedureCall();
call.setProcedureName("Read_All_Employees");
readAllQuery.useNamedCursorOutputAsResultSet("RESULT_CURSOR");
readAllQuery.setCall(call);
List employees = (List) session.executeQuery(readAllQuery);
Regards,
Vinay

Can I call stored procedure with PL/SQL?

Oracle newbie question, it is.
Assume a very simple stored procedure like this:
Create or replace procedure aa (
inPar IN number, outPar OUT number)
IS
rrr Number;
Begin
Blah, blah, blah...
rrr := inPar + 100;
Blah, blah, blah...
outPar := rrr;
End;
So the questions are
1) How do I call the above stored proc and pass input parameter values dynamically?
2) How can I retreieve the results of outPar?
I did some research and I learn I can use a programming interface such as Visual Basic or Java. Is that the only way available? I know a small bit about SQL*Plus. f I've tried to enter some PL/SQL commands under SQL*PLUS but I'm stuck. I must have missed something..please.
In MS SQL Server environment I know what I can do. If I want to do the same thing, I just:
Create proc aa ( @inParam int, @outParam int OUTPUT )
as
blah, blah, blah
Set @outParam = @inParam + 1000
return 1
GO
Enter the following statements (via query analyzer) to call the SQL Server Stored procedure and get the result:
Declare @outX int
Declare @returnX int
exec @returnX = aa 100, @outX OUTPUT
print str(@outX)
print str(@returnX)
Go

maybe this example might be of some help:
SQL> set linesize 120
SQL> set pagesize 40
SQL> select * from emp;
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO
      7566 JONES      MANAGER         7839 02-APR-81       2975       1000         20
      7902 FORD       ANALYST         7566 03-DEC-81       3000                    20
      7839 KING       PRESIDENT            17-NOV-81       5000                    10
      7698 BLAKE      MANAGER         7839 01-MAY-81       2850                    30
      7782 CLARK      MANAGER         7839 09-JUN-81       2450                    10
      7369 SMITH      CLERK           7902 17-DEC-80        800                    20
      7499 ALLEN      SALESMAN        7698 20-FEB-81       1600        300         30
      7521 WARD       SALESMAN        7698 22-FEB-81       1250        500         30
      7654 MARTIN     SALESMAN        7698 28-SEP-81       1250       1400         30
      7788 SCOTT      ANALYST         7566 09-DEC-82       3000                    20
      7844 TURNER     SALESMAN        7698 08-SEP-81       1500          0         30
      7876 ADAMS      CLERK           7788 12-JAN-83       1100                    20
      7900 JAMES      CLERK           7698 03-DEC-81        950                    30
      7934 MILLER     CLERK           7782 23-JAN-82       1300                    10
14 rows selected.
SQL> create or replace procedure proc_get_emp_name(pEmpno in number,
2                                                pEmpName out varchar2) as
3 begin
4    select ename
5      into pEmpName
6      from emp
7     where empno = pEmpno;
8 end;
9 /
Procedure created.
SQL> declare
2    vEname     emp.ename%type;
3 begin
4    for i in (select empno from emp) loop
5      proc_get_emp_name(i.empno,vEname);
6      dbms_output.put_line(vEname);
7    end loop;
8 end;
9 /
SMITH
ALLEN
WARD
JONES
MARTIN
BLAKE
CLARK
SCOTT
KING
TURNER
ADAMS
JAMES
FORD
MILLER
PL/SQL procedure successfully completed.
SQL>

Can JDBC adapter be scheduled to call stored procedures

Can JDBC adapter be scheduled to call stored procedure in other database passing previous date as input parameter

Hi Gurus,
actually our scenario is jdbc->XI( <-RFC->)->File
Here our payload is around 5000 records
can it be advisable to use rfc synchronous communication.
The scenario will be exected only in night times.so can we schedule the adapter as we are using sp9.
If not what must be the good design approach.
And also after scheduling to a perticular period ,if there is any down time of XI server,will the process start immediately after the sever up or it will again watch for that perticular time.

JDBC SQL Server Channel Calling Stored Procedure Won't Return Result Set

Similar Messages

Maybe you are looking for