JDBC URL for Two Oracle Nodes with different SID

Hi All,
I have two DB nodes which are running independently (Mean no RAC), I want to configure JDBC URL for these nodes that if one node goes down my application automatically connected to second one.
Both nodes have different HOST and SID but the tables i am going to access have same structure. we are using this DB for some logging purpose that's why we didn't choose RAC option.
Regards,
imran

For RAC database, I used:
jdbc:oracle:thin:@(DESCRIPTION=(LOAD_BALANCE=on)(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=hostname)(PORT=port))(ADDRESS=(PROTOCOL=TCP)(HOST=hostname)(PORT=port)))(CONNECT_DATA=(SERVICE_NAME=servicename)))
For non RAC database you could ommit LOAD_BALANCE setting, and set correct hostname & port for both nodes. We connected using common service name. If your databases have different service names, then the SID will have to be part of ADDRESS somehow - maybe (SID=sid).
I have to mention though that unless the main reason behind your decision was lower cost without RAC (and you don't need to store any information apart from logs), it was a wrong decision. If you decide to store any additional information in the database for whatever reason (new requirements), you are in trouble.

Similar Messages

JDBC URL for Two Oracle Nodes

Hi All,
I have two DB nodes which are running independently (Mean no RAC), I want to configure JDBC URL for these nodes that if one node goes down my application automatically connected to second one.
Both nodes have different HOST and SID.
Regards,
imran

Hi jwenting,
I tried following URL in PL/SQL developer and my fail over is working fine with separate nodes, Only thing i did was i keep SID of both nodes with same name.
ERS=(DESCRIPTION=(FAILOVER=on)(LOAD_BALANCE=off)(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=172.21.5.130)(PORT=1521))(ADDRESS=(PROTOCOL=TCP)(HOST=172.21.5.133)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
But strange when i connected this through JDBC URL like following it gives me error of invalid URL
jdbc:oracle:thin:@(DESCRIPTION=(FAILOVER=on)(LOAD_BALANCE=off)(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=172.21.5.130)(PORT=1521))(ADDRESS=(PROTOCOL=TCP)(HOST=172.21.5.133)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
Regards,
imran

Need to setup Premiere CS6 sequence for two file types with different field orders

I have a client who has shot video for me using two cameras, one camera was set to progressive, and the other to interlaced upper field first. I need to use both file types in the edit and have been struggling to set up the sequence to get the best look for the end product, a DVD. I have several videos to do for her that were all shot in the same way, so I need a solution!
I would appreciate help figuring out how to set up this work flow from beginning to end.
Should I convert one of the files from the beginning so they match field orders before going into a sequence? Or do I just need to do some adjusting of the files once they are in the sequence? Is it just as simple as changing the transcode settings to favor the upper field first? I'm definitely having issues once the video is transcoded in Encore and you can see a lot of jagged edges and lines especially during movement. My client isn't happy and I've tried several workarounds, but to no avail.
Here are the two file types I have:
File extension: .MOV
H.264, 1920x1080, Linear PCM, 16 bit little-endian signed integer, 48000 Hz, stereo
FPS 29.97
No Fields: Progressive Scan
File extension: .MTS (my Mac finder can't read these files, but they are read in Premiere)
Image Size: 1920 x 1080
Frame Rate: 29.97
Source Audio Format: 48000 Hz - compressed - 6 channels
Pixel Aspect Ratio: 1.0
Upper Field First
I am using Adobe Premiere CS 6.0.2
Encore 6.0.1
Media Encoder 6.0.2.81
I am running it on an iMac 27-inch, Mid 2011
with Mac OS X Lion 10.7.5
Processor 3.4 GHz Intel Core i7
Graphics AMD Radeon HD 6970M 1024 MB
I've just been setting the sequence to match the .MOV files since they look much better than the .MTS files. I've done the opposite as well, setting the sequence to match the .MTS files and it doesn't seem to help. I've also changed the field order of the files once they are in the sequence by changing the field options and have tried converting the .MTS files in the Media Encoder, but nothing I've done has worked.
Any help would be so appreciated! The client I have is a photographer, so she wasn't aware of this issue when she first shot these videos. So I have 10 videos with these issues I need to get back to her, hopefully issue free! I'm struggling as an editor because my last job I was using FCP and was working with videographers who knew what they were doing, so I've never faced such problems before. Plus I'm new to the Adobe software. Not a good combination. Please forgive me if I didn't give all the information you need. I will happily respond with whatever more information you may need to help me out!
~KTrouper

I wonder if you could do your edit ignoring any visual issues of the interlaced footage but keeping the different sources separate ( checkerboard edit Vid 1/ Vid 2 )
Lock it down then export the interlaced part of the edit as a Digital Intermediate.
Maybe Export the other source as well to the same codec. DI
Bring them back together in a New Sequence. You wold have to deal with the black spacing.

Operating concern for two company code with different currency

Hi,
We are merging two company code into one SAP server.
We decide to use on chart of account, and to use one operating concern.
For company code A: the currency is CNY, for company code B: the currency is TWD. The operating concern currency is:CNY.
So i need to in KEA0(maintain operating concern) active company code currency, right?
So every posting in company code B will be posted in TWD and CNY to COPA same item, right?
In KE30 report, where to add characters: Currency type that i can show company code B report in TWD?
Thanks.

Dear David,
Yes. If you have different compancy codes within one controlling area, you have to maintain currency type with 10-Company code currecny and while maintaining the operating concern also you have to choose the company code currency only. Then only you will get the reports with respect of your company code currecny level. This will be basing on your company code-sales organisation, plants and other charcters assignment basis in your configuration.
All the best,
Dharma Rao. Yekula.

Joining two fact tables with different dimensions into single logical table

Hi Gurus,
I try to accomplish in Oracle Business Intelligence 11.1.1.3.0:
F1 (D1, D2 and D3)
F2 (D1 and D2 and D4)
And we want to build a report F1 F2 D1 D2 D3 D4 to have data for:
F1 that match only for D1-D2-D3
and data for
F2 that match only D1-D2-D4
all that in one row, so D3 and D4 are not common dimensions.
I can only do:
F3 (D1, D2)
F4 (D1, D2 and D4)
And report
F3 F4 D1,D2,D4 (all that in one row, and only D4 is not a common dimension)
Here is the very good example how to accomplish the scenario 1
http://108obiee.blogspot.com/2009/08/joining-two-fact-tables-with-different.html
But looks like it does not work in 11.1.1.3.0
I get
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 14025] No fact table exists at the requested level of detail: [,,Clients,,Day,ROI,,,,EW_Names,,,,,,,,,,,,,,,,,]. (HY000)
I am sure I set up everything correctly as advised in the blog but it works with only one not a common dimension
Is it a bug in 11.1.1.3.0 or something?
Thanks,
Kate

Thanks for all your replies.
Actually, I've tried the solutions you guys mentioned. Generally speaking, the result should be displayed. However, my scenario is a little bit tricky.
table Y's figures are not the aggregation of table X for D dimension. Instead, table Y's figures include not only D dimension total, but also others (others do not mean A, B, C dimension). For example, table Y stores all food's figure, while table X stores only drink's figure. D dimension is only about drink's detail. In my scenario, other foods' figure is not provided.
So, even if I set D dimension to all/total for table X, table X's result is still not the same as table Y.
Indeed, table Y does not have a column key to join to D dimension's key. So, if I select D dimension and table Y's measures at the same time in BI Answer, result returns no data. Hence, I can't compare table X and table Y's results with selection of D dimension.
Is there any solution to solve this problem?
Edited by: TomChan on Jun 3, 2009 9:36 AM

Performance between two partitionned tables with different structure

Hi,
I would like if there is a difference between two partitionned tables with different structure in term of performance (access, query, insertions, updates ).
I explain myself in detail :
I have a table that stores one value every 10 minutes in a day (so we have 144 values (24*6) in the whole day), with the corresponding id.
Here is the structure :
| Table T1 |
+ id PK |
+ date PK |
+ sample1 |
+ sample2 |
+ ... |
+ sample144 |
The table is partionned on the column date, with a partionned every months. The primary key is based on the columns (id, date).
There is an additionnal index on the column (id) (is it useful ?).
I would like to know if it is better to have a table with just (id, date, value) , so for one row in the first table we'll have 144 rows in the future? table. The partition will already be on the columns (id, date) with the index associated.
What are the gains or loss in performance with this new structure ( access, DMLs , storage ) ?
I discuss with the Java developers and they say it is simpler to manage in their code.
Oracle version : Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
Thanks & Regards
From France
Oliver
Edited by: 998239 on 5 avr. 2013 01:59

I mean storage in tablespaces and datafiles on disk.
Can you justify please and give me concrete arguments why the two structures are equivalent ( except inserting data in T(id, date,value))
because i have to make a report.i didnt say any thing like
two structures are equivalent ( except inserting data in T(id, date,value)i said
About structure : TABLE1(id, date, value) is better than TABLE1(id, date, sample1, .... sample144)because
1) oracle has restriction for numbers of column. Ok you can have 144 columns now but for future if you must have more than 1000 columns , what will you do?
2) Restrictions on Table Compression (Table compression is not supported for tables with more than 255 columns.)
3) store same type values on diffrent columns is bad practise
http://docs.oracle.com/cd/B28359_01/server.111/b28318/schema.htm#i4383
i remember i seen Toms article about this but now i cant find it sorry ((( if i found i will post here

HT1491 I have two itunes accounts with different Apple ID's. How can I merge them into one?

I ahve two itunes accounts with different Apple ID's. How can I merge them into one account?

Apple has no provisions for this. You cannot merge multiple Apple ID's into one ID. Content is always tied to the Apple ID that was used to purchase it.

Merge of two same items with different Qty in po

Hi Experts,
Is it possible to merge two Same items with different Quantity into 1.
For Eg:- 2 similar items with qty 2 & 3 must show 5 qty appearing once.Is it possible through Transnotification what should be the query.
Mona

Hi Mona,
If you want to display a Purchase Order on screen summarized by item, set the "Summary Type" to "By Item" (by default it is "No Summary"). The PO lines will then be summarized by item with total quantity for each item.
If you want to display it on the printout then you need to modify the PLD. It is quite easy actually. You can use the Repetitive Area Footer to display the summary of each item and set all fields in the Repetitive Area to be not visible and set the height to minimum height.
Cheers,
Marini

Same setting for two file adapter but different output

Hi ,
I am having two receiver file adapter for two differrent scenario with same settings but different structure.
I want the output of the file for both the scenario should be displayed line by line but it is working fine for one scenario.File type,file encoding and FCC are same in both the interface except the fieldsnames in FCC.
When i check both the output file i found that the scenario which is working fine having OA OD hexadecimal value at the end of line of each line.and the second scenario which is giving the output in single line is having only OA.
waitng for Valueable inputs!!!
Thanks
Santosh

Hi Santosh,
Kindly elaborate your question.
it would be helpful if you post the content conversion parameters of the erroneous file channel.
Regards,
Varun

How to do consolidation using two chart accounts with different currencies

Hi
How to do consolidation using two chart accounts with different currencies and do we need to use same fiscal year variant ?
What would be the impossible factors when we use two company codes with two chart of accounts ...
Regards
Kesharika

Good Afternoon
You need to use translationa and/or valuation
translation takes account in foreign currency and translates to group currency
valuation takes account in currency 1 and restates into currency 2 for a company with currency 2
so depends on which company you are consolidating for, a company in a foreign currency in that currency or consolidating a compnay in foreign currency to parent company in another currency

Best practice for integrating oracle atg with external web service

Hi All
What is the best practice for integrating oracle atg with external web service? Is it using integration repository or calling the web service directly from the java class using a WS client?
With Thanks & Regards
Abhishek

Using Integration Repository might cause performance overhead based on the operation you are doing, I have never used Integration Repository for 3rd Party integration therefore I am not able to make any comment on this.
Calling directly as a Java Client is an easy approach and you can use ATG component framework to support that by making the endpoint, security credentials etc as configurable properties.
Cheers
R
Edited by: Rajeev_R on Apr 29, 2013 3:49 AM

Jdbc url for yahoo finance

Hey guys,
Can anyone please help me find out what is the JDBC url for Yahoo Finance Database that stores the values of the historical stock quotes . I desperately need it for my java application in which I require to access the database in order to get the high, low, open, close quotes of a stock index. Any help would be greatly appreciated.
Thank you,
Vivek

Hi!!
The URL to the database on the yahoo webpage is http://chart.yahoo.com/d . If you go to that link then you will be able to access the database and do a search on it.
Please reply. Any help will be greatly appreciated.
Thank you,
Vivek

MIRO for multiple PO's with different Pymt Terms (Same vendor)

Hi,
Is it possible to process many PO's for the same vendor with different payment terms (PO has got diff. pymnt terms) thru MIRO. Vendor has sent invoice clubbing diff. PO's.
Regards
Nilesh

Hi,
There are different payment terms in financial accounting, sales & Purchasing.When you then enter a business transaction, the application in question will use the key specified in its area of the master record.
For exmple, in vendor master we have 2 payment terms one is at Company code level and the other one is at purchase organisation level.
I hope in PO, the payemnt terms will be picked up from the purchasing view, and in invoice payment term will be picked up from the company code level.
Since Payment term is at header level in invoice, it is not possible to have different payment terms for single invoice.
Also in terms of finance its not possible to have different payment terms for single vendor.
Regards,
Prabu

I am unable to download iPhoto version 9.5 and iMovie version10.0, with my apple ID due to remark, this update is for an app downloaded with different Apple ID,Sign in with that Apple ID and try again,but I don't have other ID

I am unable to download iPhoto version 9.5 and iMovie version10.0, with my apple ID due to remark, this update is for an app downloaded with different Apple ID,Sign in with that Apple ID and try again,but I don't have other ID.
<Email Edited by Host>

The Early 2011 MacBook Pro shipped with Snow Leopard, so these are not the Mac App Store versions of iLife, they are the boxed software versions.
If they are in an iWork '09 folder take them out and let them loose in the Apps folder. Then reindex your HDD.
Spotlight: How to re-index folders or volumes -
http://support.apple.com/kb/ht2409

Different timeout for two protected applications with same AM 7.1

I have a AM 7.1 configuration planned.
We need to protect two different application url's; And provide different session & idle timeout for each of these url's.
Can we configure different timeout for two protected URL's / applications configured with same AM 7.1 ?
/Kasi

Hi,
I have not actually configured this, but you can create a policy for that application with an "Active Session Time" condition.
You also have an option there to destroy or not the session.
But if the user is allowed to do SSO between the 2 applications then you should consider if you can destroy the session or not.
Hope this helps.
Andrei

JDBC URL for Two Oracle Nodes with different SID

Similar Messages

Maybe you are looking for