JDE business services

Hi,
1.BPEL can invoke JDE Business Services(wsdl) but similarly, can JDE Business Services invoke BPEL web service(wsdl) ?
Thanks
Edited by: soauser on Aug 20, 2010 11:58 AM
Edited by: soauser on Aug 20, 2010 11:59 AM
Edited by: soauser on Aug 20, 2010 2:48 PM
Edited by: soauser on Sep 2, 2010 7:57 AM

Demo E900 is a big mess, perhaps "Oracle Lab" packaged it this way.
Do this:
1- Create a project "Temp"
2- Check out F986020 & F986030 (only specs available, no table exists in the data source) - if you try to see by UTB or databrowser
3- Generate table & index in design (take every thing as default)
4- Now try check-in your BSSVs.
5 Goodluck

Similar Messages

Replace E1- Adapter with Business Services

Hello,
We are using E1-adapter to communicate with web Methods ( like calling business function, table IO etc..), now we are planning to replace E1- adapter with Business Services. We are using tools 8.98.11 and Application Release E812.
Question is , is it possbile to create a wraper to call any business functions just like E1-adapter? Any help is greatly appriciated.
Thank you.
Edited by: user3448054 on Oct 12, 2009 1:09 PM

Yes, you can use the JDE Business Service Server to simulate the E1-Adapter associated with webMethods. Oracle provides out of the box Business Services for a majority of the E1 transactions. We have implemented Business Services Server with our webMethods and it is working very well.
-Eric

ERP 8.12 TR8.98 and available business services question

Hi there
We are just about to upgrade to TR 8.98 from 8.96 primarily to make use of BSSV functionality. We are still on ERP 8.12.
I am a little confused about what we would have access to in 8.12 TR8.98.
I thought I read that the RI's are for testing purposes and should not be used in production, but used as a basis for development.
I just found document 'JD Edwards EnterpriseOne Business Services 9.0 Reference Guide' which lists quite a few available business services that look ready to use.
Would these now be available to us on ERP 8.12 TR8.98 or do we need to be on ERP 9.0 to use these services, which are not prefixed with 'RI'.
I would just like to clarify what our situation will be and if we don't have these services, could we get them in the form of an ESU?
Best Regards,
Perusha

Yes, you can use the JDE Business Service Server to simulate the E1-Adapter associated with webMethods. Oracle provides out of the box Business Services for a majority of the E1 transactions. We have implemented Business Services Server with our webMethods and it is working very well.
-Eric

Unable to Check in Business Services in JDE DEMO.

Hi,
We have ERP 8.97 JDE tool set installed on our local m/c. We are unable to check in the Business Services (BSSV) object (JP55HOL) in JDE DEMO. We also tried checking in the vanilla BSSV (J0000030) after we had chekced it out, but this also did not work out. We are getting the error: General Error in Method, Check-in. However we had no issues in checking in the regular JDE objects.
Please help!!!
-Shahid

Demo E900 is a big mess, perhaps "Oracle Lab" packaged it this way.
Do this:
1- Create a project "Temp"
2- Check out F986020 & F986030 (only specs available, no table exists in the data source) - if you try to see by UTB or databrowser
3- Generate table & index in design (take every thing as default)
4- Now try check-in your BSSVs.
5 Goodluck

Can I create JDE BSSV (Business Services) for REST based services?

Can I create JDE BSSV (Business Services) for REST based services? If yes, then how? In what way it will be different from SOAP based?

Hi
Within Oracle SOA Suite, Oracle Service Bus would handle the REST side of things, which in turn would call the JCA adapter to talk to your JDE backend, or vice versa.
Checkout the JDE adapter docs - http://www.oracle.com/technetwork/middleware/soasuite/documentation/jdewardsweb-1954164.pdf
and the OSB Docs - HTTP and Poller Transports - 11g Release 1 (11.1.1.7)
OSB 11.1.1.7 introduced additional REST support, so I'd recommend using that version onwards.
Cheers
iain

Business Services development with jDeveloper

We are making use of the Business Services feature in JDE to expose business functions as web services, that's great and working.
we have one problem with jDeveloper during development.
we can create a new business service from OMW in JDE and invoke jDev from there, that's fine.
then we can put codes in the project in jDev, that's fine.
then we can publish the code as J2EE web service, that works as well.
then if we restart jDeveloper after that, the J2EE web service doesn't work in the jDev embeded web server any more.
we always have to delete the web service in the project and go through the same wizard steps to generate the web service again.
it's very annoying when you have more than a handful of web services you want to expose.
and if you use the WSDL in a client project to call this web service, you have to remember to give the web service the same name when re-generating otherwise you have to reimport the WSDL again on client side, it can be another huge pain if the client is Oracle BPEL.
so my question is, why is this happening? is it some settings in jDev that we didn't set right? or is it a bug in jDEv and is there a work around?
thanks in advanced!

What error did you get?

Business Services Development

In EnterpriseOne Tools 8.97 you're enable to create web services from business services. THAT'S GREAT! It can solve most of problems.
But I cann't see any example, could you advise me some about this.

I put this in another thread - but it looks like it is appropriate for this thread also.
The FMW Best practices site has some good tutorials and articles:
http://www.oracle.com/technology/tech/fmw4apps/jde/index.html
There is a JDE and SOA page on customer connect that has links to white papers, red papers, documnetaion, training etc.
http://www.peoplesoft.com/corp/en/iou/implement/soa_enablement.jsp

USe of Business services with BPEL or ESB

Hi,
Has anyone come across any example on how to use Busiess services with BPEL or ESB.
Oracle App Server , JDE 812 , Tools 8.98 , SOA suite 10g

Samir,
I don't see any answer for your post.
Did you find a solution. I would be interested to know as how to integrate business services in JDE with BPEL/SOA 10g or 11G.
I would appreciate if you could share the approach/solution you followed.Also, please let me know if there are any docs which I can for jde-fusion integration.
Thanks
Edited by: user13374451 on Jul 26, 2010 9:15 AM

Hands on Lab JD Edwards Enterprise One Business Service Development

Hi,
I completed the "Oracle Open World 2008 - Hands on Lab JD Edwards Enterprise One Business Service Development" PDF at [http://www.oracle.com/technology/tech/fmw4apps/jde/pdf/openworld08_businessservicedevelopment.pdf].
I ran the business service at the end of the lab to get the following error:
Internal Server Error (Caught exception while handing request: oracle.e1.bssvfoundation.exception.E1AuthorizationException: User is not authorized to invoke this published business service)
How can this be resolved?
We are on 8.12 and 8.97.1.2 tools
Cheers,
Steve.

Hi,
I am having problems at step 5 in your last post.
" 5) Check your Published BSSv is set to published or not in OMW. If not go to security workbench and select the option publish BSSV from Form Exit and Add Custom Published Business service created, make it Executable."
- The business function is not published. I try to in Security workbench (P00950) and publish BSSV row exit not to find my newly created business service object (JP55HOL). I can see all the standard ones but not mine. I open the P00950 application to know what the underlying tables are in the Business Views the grids source the data from, to find that JP55HOL exists in the Object Librarian table F9860 but not in the Business Service Published Methods P98630. For the business function to be published, the record needs to exist in this table. How could this record not be written and how can it be corrected through the Application?
- I don't understand what "or not in OMW" means?
Please understand that I have followed the hands on lab with no other BSS setup on 8.12/8.97
Thanks,
Steve

Need good example HTTP POST Business Service

Hi guys,
I've looked into the provided Reference Implementations in JDE for HTTP Post examples, but they only provided a business service (JRH90I13) and published business service (JPRH90I0) without any C BSFN to execute them. Does anyone have possible examples of how this works?
Thanks in advance.

Hi Gregory,
In fact when i used route node to invoke a business service i modified "URL dynamically by setting the value in the pipeline variable $outbound", it worked here.
Same i tried on Service Callout, it did not work. Also when we create a service callout action it expects us to select either "confugure soap body" or "configure payload document" followed by
1) Request Document variable
2) Response Document variable.
What parameter should i set for above fields?
Thanks,
Anup

Logical Systems in Business Services

Hi
In Business Service creation, for Adapter Specific Identifiers, the parameter for the Logical System. It is only possible to assign one logical system to one Business Service ?.
i.e. to do
MyBusServ1, Z_LS_1
MyBusServ2, Z_LS_1
is not possible ?
When trying to assign Z_LS_1 to MyBusServ2 I get the error that Z_LS_1 is already assigned. Is there a way to circumvent ?, I do not want to create two logical systems in R/3 as the IDOCS types submitted by the Business Services are the same.
Thanks
Damien

Thanks for the replies
Sarvesh - The Business service is the sender of the information \ IDOC. If I remove the Adapter specific config then how will XI know what Logical system to apply to the IDOC ?.
Jaishankar - I am creating two IDOC's in SAP. MATMAS and PORDCR. The input file are coming from two different source systems. lets say sys1 and sys2. Both of thse for clarity are created in my scenario as Business Services. sys 1 creates MATMAS and PORDCR IDOC's int he syatem, sys2 creates PORDCR IDOC's in the system. As sys1 and sys2 are related in that they created the IDOC's as part od the same project then I would like to collect in the same partner profile in SAP e.g. Partner Profile ZPP_IDOC with IDOC types MATMAS PORDCR that serve as input for both systems. Logically I would assume that I can assing the logical system ZPP_IDOC to both the adapter specific parameter in both sys1 and sys2.
Thanks
Damien

Specify filename in OSB File Trasport Business Service

Hi All,
Is it possible to specify the complete filename in OSB File Transport Business Service?
the default behavior allows me to specify the prefix and suffix only, is it possible to override and specify the complete filename?
Thanks,
Tal

Specifying the filename for outbound FTP transport in OSB the thread discusses with FTP BS and same would apply for File BS
Manoj

How to use a existing Business Service in IDoc-File Scenario

Hi Experts,
I am new to XI.
I am working on a IDoc to File scenario where in i am importing the CREMAS.CREMAS03 IDoc from the R/3 System.
When i try to create a Business Service in Configuration Scenario Object in Integartion Directory, i get a message saying "SAP system ID ER1 and client 800 already exist in service | CLNT800ER1".
Can i reuse this Business Servie in my Configuration Object?
If yes, can you please guide me How to go about it?
Thanks for the effort.
Cheers
Gaurav Raghav

U may directly use it.
Just select the business service wherever required. It is not necessary that the Business Service is present in ur configuration scenario. But if u still want it, u may add it using "Add to Scenario" option from other configuration scenario or from Objects tab
Regards,
Prateek

Already used Logical System in Business Service?!

Hi, well i am facing a JMS2IDoc-Scenario.
As sender i configured a Business Service (K15) with the CC_JMS. The receiver is a business system (HRT) with the CC_IDoc.
While i test the scenario i received following error:
"Unable to convert sender service to an ALE logical system"
Thats fine so far, therefore i checked the Adapter-Specific Identifiers and entered the Logical-System name. This is already in use at the business system (HRT) because of some CC for other Scenarios.
Now there is the problem that i can't use this logical system name at K15, no idea why.
Because of not having the technical details of the source-system (JMS) i choose to use business service. Is there another idea?! Party?!
br, Jens

Hi,
The issue is with the fact that this Logical System Name has been assigned to another Business System ( say Buss System X) .And you want to use this same Logical System Name for the sender JMS service( Buss System Y) as well , correct?
Solution is,
In the Receiver Agreement , Select Header Mapping and for the Sender Servicce, select the Correspodning Sender Service ( Sleect Buss System X )to which the Logical System Name is assigned.
Now in the runtime this will be used as the Sender Service from which the Logical System Needs to be taken.
Regards
Bhavesh

Business Systems and Business Service - does any difference

Hi Experts,
Could any one please guide me what is the difference between
Business Systems
and
Business Service.
Which situations we use Business Systems / Business Service.
Does it have any performance issues?
Why we are not configuring Business service in SLD?
Cheers Experts!!
Sunil

Hi Sunil,
Business System: Address a particular business system as the sender or receiver of messages.
A business system is an actual application system in a system landscape. A business system
(service) comprises information about the inbound and outbound interfaces and the software
component versions of the business system. The business system services are used when
configuring internal company processes.
Business Systems are Logical Senders or Receivers that exchange messages by using the Integration
Server and that are entered in the System Landscape Directory.
The Business Systems in the System Landscape Directory relate to a system landscape.
The Business Systems of business partners are therefore not entered in the System Landscape
Directory. To be able to address such business partners logically, use communication components in
the Integration Directory. A business system is a way of specifying a communication component in the
Integration Directory more precisely (business system component).
Business Service: Address an abstract business entity as the sender or receiver of messages.
Using a business service, you can define the technical or business subunits of the companies
involved and then assign them the relevant interfaces. The business services are used when
configuring cross-company processes.
In the PCK, the Service is of type Business Service. It represents an abstract, addressable unit.
Business services are used in cross-company processes, for example, if the parties involved have only
published their interfaces and not their system landscape, or it is only partly known.
Using a Business Service,we can define the technical or business subunits of the companies involved
and then assign them the relevant interfaces.
It is useful to use Business Services when configuring cross-company processes. Usually, the
interface descriptions of the business partners involved are made publicly available.
Also,There is already lot of thread regarding the same discussion, please see it below.
Business service or Business system??
Re: Business Service <--> Business System
Difference between Business service, Business system and Business process
Business Service vs Business System in Integration Directory.
Business Service (vs) Business System in Integration Directory.
What is the difference between Business System and Business Service?
business system and business service
Diff b/w Business service & Business System?
Regards,
Vinod.

JDE business services

Similar Messages

Maybe you are looking for