JDEV 11G TP4 [BUG]: Offline Database / Copying from another workspace

see JDEV 11G TP4 [BUG]: Offline Database / Copying project from workspace
Message was edited by:
micwic

I completely reinstall JDev and set it to use subversion ... that resolve the problem and i'm no more in a position to reproduce it.

Similar Messages

  • JDEV 11G TP4 [BUG]: Offline Database / Copying project from workspace

    I have two workspaces.
    In these two workspaces i have a Documentation project containing offline database objects.
    Workspace 1
    +Documentation
    +connection
    +schema
    +objects
    +schema
    +objects
    Workspace 1
    +Documentation
    +connection
    +schema
    +objects
    +schema
    +objects
    I would like to copy the content of one schema from workspace 1 to a project in the workspace 2.
    Both schema have same name.
    Connection is different.
    The active workspace is workspace 2.
    In the wizard i'm able to select the Application (workspace), the project but the connection listed is only the one for workspace 2 (the active one). It normally has to be the ones corresponding to workspace 1 that i selected has the source for the copy.
    The result it that i got the list of objects from Documentation project from workspace 2 instead the desired ones from workspace 1.
    Hope its help

    Loose it again today ... please is it possible to address this problem ... it's really frustrating each time restore the configuration file.

  • JDEV 11G TP3 [BUG]: Diagramming / Use Case & Activity  / open save

    I'm not able to open existing use diagram and couldn't save activity diagram after i created them. So UML is not functional in this preview release.
    Is this knowns bugs ?
    Is some workarounds knows ?
    I need these diagrams very soon and would know if i have to create them in a another tools or it is a way to use JDeveloper for them.
    Thank you

    You can find more details in these threads
    http://forums.oracle.com/forums/thread.jspa?threadID=622107
    JDEV 11G TP3 [BUG]: Diagramming / Use Case & Activity  / open save
    I already sent my project files to Shay. I may sent them to you too if needed.
    I suspect the problem may be due by the fact i'm using two workspaces simultanously, both managed with subversion. I already detected in the same configuration that "Select in Navigator" from pl/sql editor doesn't find an edited file (loaded from the offline database navigator) in the offline database navigator because it was searching the same project but in the wrong workspace.

  • How can I print a report in JDev 11g TP4

    I am using JDev 11g TP4 .. in ADF application how can I print a report?
    Thank you
    Sameh Shokry

    You do file->print from your browser's menu I guess.
    There is also this:
    http://one-size-doesnt-fit-all.blogspot.com/2008/03/creating-printer-friendly-jdev-adf.html

  • Compile PL/SQL with JDEV 11g TP4 - Compile button missing ?

    Hi
    I have been working through the database development with Jdeveloper tutorial:
    http://www.oracle.com/technology/obe/obe11jdev/11/db_dev/obe_%20databasedevmt.htm
    this, as name suggests, discusses db development with jdev 11g TP4.
    However I seem to have an issue with the section named 'Creating and Debugging PL/SQL Objects in the Database'.
    In section 9 of 'creating a pl/sql package' the tutorial talks about a compile for debug button on the code editor. This essentially compiles the package against the DB, however in my Jdev, this button is does not exist. Is this just because this is only a tech preview version or is there some further config I need to do?
    Versions are..
    OS: Vista SP1
    JDEV: 11.1.1.0.0
    DB: 10.2.0.1.0
    Thanks in advance
    Will

    hi Will
    Maybe this is a beter forum for your question:
    "JDeveloper and OC4J 11g Technology Preview"
    JDeveloper and OC4J 11g Technology Preview
    success
    Jan Vervecken

  • PL/SQL compile button missing JDEV 11g TP4

    Hi
    I have been working through the database development with Jdeveloper tutorial:
    http://www.oracle.com/technology/obe/obe11jdev/11/db_dev/obe_%20databasedevmt.htm
    this, as name suggests, discusses db development with jdev 11g TP4.
    However I seem to have an issue with the section named 'Creating and Debugging PL/SQL Objects in the Database'.
    In section 9 of 'creating a pl/sql package' the tutorial talks about a compile for debug button on the code editor. This essentially compiles the package against the DB, however in my Jdev, this button is does not exist. Is this just because this is only a tech preview version or is there some further config I need to do?
    Versions are..
    OS: Vista SP1
    JDEV: 11.1.1.0.0
    DB: 10.2.0.1.0
    Thanks in advance
    Will

    hi Will
    Maybe this is a beter forum for your question:
    "JDeveloper and OC4J 11g Technology Preview"
    JDeveloper and OC4J 11g Technology Preview
    success
    Jan Vervecken

  • How to install PMD extension for JDEV 11g TP4 ?

    Hi,
    I tried to install PMD extension to JDEV 11g TP4 without success.
    Check for updates doesn't bring this extension.
    Tools --> Preferences --> extension brings following message:
    The ide.extensions or ide.noextensions system properties are set and override user extension preferences. To configure extensions, unset these properties and restart.
    Release notes of JDev 11g TP4 says:
    In this release, users are unable to manage extensions from the Tools > Preferences, Extensions page. The user will instead see the following message:
    The ide.extensions or ide.noextensions system properties are set and override user extension preferences. To configure extensions, unset these properties and restart.
    Is there a other way to add this extension?
    regards
    Peter

    Hello John,
    But for TP1 there was an extension available.
    http://www.oracle.com/technology/products/jdev/101/update/exchange.xml#net.sourceforge.pmd.jdeveloper
    Does anyone know if PMD JDeveloper extension will be available in production release?
    regards
    Peter

  • Remove mailbox database copy from DAG

    Hi There,
    We would like to remove the mailbox database copy from our exchange server as we are lack of the space on our fixed vhd and we hope to be able to free about 100GB from the passive database copies as we have deployed DAG. is there any guidelines or procedures
    to safely remove the database copies? currently, we have 4 mailbox servers, HQMB01, HQMB02, SSMB01, and SSMB02. HQMB01 and HQMB02 is already part of DAG members by itself. however, on ssmb01 and ssmb02, we also add in HQMB01 and HQMB02 as the DAG member,
    thus they can fail over to HQMB01 or HQMB02 if their server have issue. in this situation, SSMB01 and SSMB02 passive copies is also inside our HQMB01 and HQMB02. As the our HQMB01 and HQMB02 is lack of the disk space and we would like to remove SSMB01
    and SSMB02 from the DAG, thus we could remove the passive database copies. The following is the picture of the activation preference for all servers. what is the procedures and the guidelines to remove mailbox database copy and also remove the server from
    the DAG members? we are quite confuse and worry that after we are removing wrongly and cause the active database to lost as we understand that there is replication happening between them. as we have 4 mailbox servers from which server we should perform
    the task? Wish to get some advises from the exchange guru from this forum. we are on exchange server 2010 sp1 and windows server 2008 R2.Thanks so much.
    Name                 : HQDB01
    Servers              : {HQMB01, HQMB02}
    ActivationPreference : {[HQMB01, 1], [HQMB02, 2]}
    ReplayLagTimes       : {[HQMB01, 00:00:00], [HQMB02, 00:00:00]}
    TruncationLagTimes   : {[HQMB01, 00:00:00], [HQMB02, 00:00:00]}
    Name                 : HQDB02
    Servers              : {HQMB02, HQMB01}
    ActivationPreference : {[HQMB02, 1], [HQMB01, 2]}
    ReplayLagTimes       : {[HQMB02, 00:00:00], [HQMB01, 00:00:00]}
    TruncationLagTimes   : {[HQMB02, 00:00:00], [HQMB01, 00:00:00]}
    Name                 : SSDB01
    Servers              : {SSMB01, SSMB02, HQMB01, HQMB02}
    ActivationPreference : {[SSMB01, 1], [SSMB02, 2], [HQMB01, 3], [HQMB02, 4]}
    ReplayLagTimes       : {[SSMB01, 00:00:00], [SSMB02, 00:00:00], [HQMB01, 00:00:00], [HQMB02, 00:00:00]}
    TruncationLagTimes   : {[SSMB01, 00:00:00], [SSMB02, 00:00:00], [HQMB01, 00:00:00], [HQMB02, 00:00:00]}
    Name                 : SSDB02
    Servers              : {SSMB02, SSMB01, HQMB01, HQMB02}
    ActivationPreference : {[SSMB02, 1], [SSMB01, 2], [HQMB01, 3], [HQMB02, 4]}
    ReplayLagTimes       : {[SSMB02, 00:00:00], [SSMB01, 00:00:00], [HQMB01, 00:00:00], [HQMB02, 00:00:00]}
    TruncationLagTimes   : {[SSMB02, 00:00:00], [SSMB01, 00:00:00], [HQMB01, 00:00:00], [HQMB02, 00:00:00]}

    Hi Exchange Guru,
    thanks so much for the prompt response..i have few queries to ask following your guidelines above:
    1. from the show result above, I am still confuse which server that I should go to remove as this is involving 4 database copies. from what I understand from the truncation or replay lag times of SSDB01 and SSDB02, I can see that HQMB01 and HQMB02 are on
    the third and fourth preference, which means that SSDB01 and SSDB02 will be able to failover to each of them when there is a failure and it cause the passive copies of both of SSDB01 and SSDB02 to be stored in the HQMB01 and HQMB02. what my purpose
    is to remove both SSDB01 and SSDB02 passive copies in HQMB01 and HQMB02. in this case, should I login to SSDB01 or SSDB02 mailbox servers to perform the removal with your guidelines above?
    2. is the command as below:
    Remove-MailboxDatabaseCopy -Identity SSDB01\HQMB01 -Confirm:$False
    Remove-MailboxDatabaseCopy -Identity SSDB01HQMB02 -Confirm:$False
    Remove-MailboxDatabaseCopy -Identity SSDB02\HQMB01 -Confirm:$False
    Remove-MailboxDatabaseCopy -Identity SSDB02\HQMB02 -Confirm:$False 
    will this cause the risk either of my HQDB01, HQDB02, SSDB01, and SSDB02 active copies accidentally  being removed? I am sorry that I am a bit naggy and always want a confirmation as this is very critical and I must be super careful.
    3. If after the removal successful, when is the best time to go to the drive where the passive copies stored and remove them so I can clear some space on  my disk? and is it just as simple by going to the drive and do a folder file deletion manually?
    because I just worry when I delete the file and the server is still replicating between each other, which will cause even corruption to the active database.
    4. From point 3, you mention about when the server is empty. what do you mean by that? do you mean that when the passive copies are no more there? and what command that I used to check?
    5. From point 4, is removing the server from DAG the last step to be performed? yes, I want to remove them from DAG, thus will left only HQMB01 and HQMB02 as one DAG and SSMB01 and SSMB02 as one DAG.
    Thank so so much for your patient and attention.
    Regards,
    Henry

  • Moving the mailbox database copy from one exchange server to another exchange server 2010 DAG

    Hello Team
    is it possible to the move the passive copy of database and logs from one server to another exchange server in the same DAG with out removing  and deleting the mailbox database copies in exchange 2010
    normaly procedure is
    Remove the mailbox database copies and manually delete the .edb files and logs from the physical location and re-add the mailbox database copy to the new server in the DAG.
    is that any way to achieve to move the passive database copy to another exchange 2010 server in the same DAG ?

    From your note, you appear to have a two-member DAG (with a server hosting your active database, and a second hosting the passive copy), and you want to move your passive database copy from the current passive server to another.  Your note
    about what "the normal procedure is" isn't 100% correct - there are many ways to handle this task, and all can be considered "normal". Why not just add the third server to the DAG and
    add a database copy on that third server?  Once it is fully seeded, you can remove the current passive copy.  This way, you never lose your redundancy.
    Yes i can add the third and fourth  serve in DAG , but i cannot add the mailbox database copies to the 3rd and 4th mailbox server in DAG as am using RTM version of exchange 2010 which is allowing to have only 5 database inclding mailbox datbase copies
    and also currently my lab setup is  two member dag (with a server hosting your active database,
    and a second hosting the passive copy) in the same site named SITE A
    and recently i have created new SITE B and included the 3rd and 4th DAG members in the same DAG
    i want the  mailbox database copies from the mailbox server  database  in SITE A  to
    Mailbox server database in  SITE B as  passive copy
    That is why i want to move the mailbox database without deleting / removing it manually
    Hope you understand my situation!

  • How to create a basic pay wage type without copying from another wagetype

    Hi Gurus,
    How to create a "New Wage Type" without copying from another wagetype?
    & i want this wage type "Non Taxable" as per my organisation requirment.
    pls send me config docs on my email id. Pls it is very urgent 
    Email: [email protected]
    Pls Help me
    Regards
    MHPO

    Hi Ram,
    Thanks
    One more thing should i create "Non taxable payment wage type" in Basic Pay.
    in Basic pay there is no any wage type copy Non taxable Wage type but Additional Payments there is one Copy Wage type name is "M400 Non taxable payment"
    i check the all config related setting related to M400 non taxable payment
    can i copy in Basic Pay  any wage type & create new wage type (xyz)
    & i change all setting eg processing class & all is similar in (XYZ) =M400
    its is ok or not

  • User copy from another client

    hi guru
    how can user copy from another client
    thanks

    Rajesh,
    If you are looking for copying users on same server to another client, please follow the below steps:
    Logon to target client.
    Execute Tcode SCCL. In SCCL choose source client and choose profile SAP_UONL.
    Now select "Schedule as a background job"
    This will copy only users to your target client.
    Thanks
    LK

  • 11g p2 / bug - select in navigator from database offline object editor

    It is no more possible to use the context menu "Select in Navigator" from the database offline object editor (a package body in my case). I got a message "Command not handled".
    This appear in all my packages and body.
    After restarting JDev and test again I got this message "Error encountered:
    The Offline Database file is missing. Please recreate Offline Database "1" with the correct settings.
    This object in file ADMINPROCTABLE.type will be unavailable."
    Is it a way to correct this ?

    I completely reinstall JDev and set it to use subversion ... that resolve the problem and i'm no more in a position to reproduce it.

  • Error in configuring SOA from jdev 11g TP4

    i get an error while configuring SOA from jdev 11g, error is in Test DB setting in first step. These are the details
    DB Connection String : localhost:1521:XE
    DB User Name: adrs_soainfra
    DB Password: welcome1
    error is “There was a problem in establishin a test connection to [localhost:1521:XE]. please review your Database settings and retry(oracle.jdbc.driver.T4CTTIoer processError
    SEVERE: Throwing SQLException: ORA-00942: table or view does not exist
    942
    DB is up and connected via SQLPLUS. All required env parameters are there i.e ORACLE_HOME, PATH, ORACLE_SID

    This error is due to the scripts not being run correctly. Read the instructions carefully and run them again. The first script is run as user "sys", the second one as your user you indicate in the parameters to the first script. Make sure you use the _all scripts.
    Heidi.

  • MyFaces Tobago and Jdev 11g TP2 [BUG??]

    Hi I was trying Jdev 11g TP2 and wanted to test the components from MyFaces Tobago, but when I added the Tobago JAR's the design view stop showing the preview of the standard jsf components and show them like unrecognized tags; and I haven't add any tobago component. what am I doing wrong? is it a BUG?
    EDIT:
    The thing same happens with the MyFaces Tomahawk Components. Is there any problems with MyFaces Compnents?

    Hi,
    make sure you use JSF 1.2 versions of the component set because JDeveloper 11 uses JSF 1.2. Beside of this chances are likely that this is an issue in teh current JDev 11 build. There is a TP3 planned for December, Can you verify if the issue reproduces then ?
    Frank

  • Error While creating new database connection from HFM workspace

    Hi,
    We have recently installed HFM and was trying to create database connection from database connection manager in HFM workspace.
    I am getting below error:
    "Error connecting to database connection : no HssJNIDriver950 in java.library.path" initially and later
    "Error connecting to database connection : com/hyperion/ap/adm/HssConn".
    Any information in this direction would helpful.
    Thanks,
    Bhargav
    Edited by: bhargavr on Jan 24, 2011 6:55 PM

    Hi bhargavr,
    We came accross the same issue. Try the following solution below for this 'KNOWN ISSUE' and let me know how you get on. Drop me a note if you have any questions regarding this post.
    Error: *"Error connecting to database connection: com/hyperion/ap/adm/HssConn" While Creating a Financial Management Database Connection* [ID 1102697.1]
    Modified 04-JAN-2011 Type PROBLEM Status PUBLISHED
    Applies to:
    Hyperion BI+ - Version: 11.1.2.0.00 and later [Release: 11.1 and later ]
    Microsoft Windows x64 (64-bit)
    Symptoms:
    You are running the Financial Reporting Web Server on a 64-bit server.
    When you try to create a new Financial Management (HFM) database connection using the Database Connection Manager in Workspace you receive the following message:
    “Error connecting to database connection <connection_name>: com/hyperion/ap/adm/HssConn”
    You can create a database connection in Financial Reporting Studio. When you refresh a report with a Financial Management database connection, you receive one of the following messages:
    “1001: Error connecting to database connection <DATABASE_CONNECTION_NAME>: com/hyperion/ap/adm/HssConn”
    or
    “1001: Error connecting to database connection <DATABASE_CONNECTION_NAME>: no HssJNIDriver950 in java.library.path”
    Cause:
    The issue is documented in unpublished bug 9537050, and in Known Issues in the 11.1.2 Reporting and Analysis Readme. Cross-reference unpublished bug 9707353.
    Solution:
    In the Windows registry, take the following steps:
    Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\HyperionSolutions\FinancialReporting0\HyS9FRReports.
    For each of the following entries, prefix the contents with text in the blue box: Env2, JVMOption13, and JVMOption17 (note that the JVMOption numbers might be slightly different in your environment).
    C:\Oracle\Middleware\EPMSystem11R1\common\ADM\11.1.2.0\bin-64
    If your EPM_ORACLE_HOME is not located at C:\Oracle\Middleware\EPMSystem11R1, replace that location with your location.
    Restart the server.
    G'Luck,
    -David

Maybe you are looking for