JDev 1213 : The 'requires-ui' attribute is deprecated Use 'headess' instead
Hi,
I get the following error when starting Jdeveloper for 12.1.3 (10.1.3.3.0.3):
D:\ORACLETOOLS\jdeveloper1213\jdevbin\jdev\extensions\oracle.Service.10.1.3.jar
Warning(38,40): The 'requires-ui' attribute is deprecated. Use 'headless' instead.
Warning(38,40): The 'requires-ui' attribute is deprecated. Use 'headless' instead.
Does anyone know how to fix this?
Regards,
Marnix.
Hi Marnix,
These are just warnings and you can ignore them and continue with your work.
Regards,
Sandeep M.
Similar Messages
-
itunes wont inport anythig it show listings but comes up with error ocurred while converting (song title ) the required file cannot be found using windows 8
iTunes cannot convert protected WMA tracks. There may also be problems if it can't get full access permissions. What exactly are you trying to do when the error occurs?
tt2 -
I can't use air play mirroring with the new upgrade on my imac (mountain lion) because my mac 21.5-inch is a Mid 2010... is there any way I can full fill the requirements and be able to use it? an upgrade or something??
Welcome to Apple Support Communities
http://www.airparrot.com -
I can't use air play mirroring because my mac 21.5-inch is a Mid 2010... is there any way I can full fill the requirements and being able to use it? an upgrade or something??
No. There is a 3rd party software, Airparrot.
-
How to Get the required List Item values by using Where Clause
I have two tables named "TAX_RULES","BILL"
1. " Tax_Rules" (Sub_Head_Code,Tax_ID,Tax_Percentage)
{ While "Sub_Head_Code" field is unique,
Tax_ID describes that there are two kinds of Tax_IDs based on Tax_percentage which is 6% for some Sub_Head_Codes and 3.5% for the remainng Sub_Head_Codes. I have given Tax_ID 1 for 6% and Tax_ID 2 for Sub_Head_codes having 3.5%. }
2. "BILL" (Bill_ID,Sub_Head_Code,Tax_ID,Bill_Amount)
{While "Bill_ID" describes unique Bill Identification Number,
Sub_Head_Code and Tax_ID are behaving like composite foreign key from Tax_Rules table}
I have design form for both tables.
In BILL form i am trying to get values of Tax_ID from Tax_Rules table at run-time by using WHEN-NEW-FORM-INSTANCE.
For this whenever i select a Sub_Head_Code in Bill Form, all the Tax_IDs that i have recorded against each Sub_Head_Code which is either 1 or 2 against 6% and 3.5% respectively.
But I want that whenever i select a "Sub_Head_Code", Only that Tax_ID which is associated with that Sub_Head_Code ahould come in the LIST ITEM.
I have used WHERE clause but that is useless.
Following is the Code that i have applied in the WHE-NEW-ITEM-INSTANCE Trigger at FORM LEVEL
<CODE>
DECLARE
rg_n1 VARCHAR2(40) :='TAX_ID';
rg_idn1 RecordGroup;
gc_idn1 GroupColumn;
errcode NUMBER;
BEGIN
CLEAR_LIST('BILL.TAX_ID');
rg_idn1 := Find_Group(rg_n1);
IF Id_Null(rg_idn1) then
rg_idn1 := Create_Group(rg_n1);
gc_idn1 := Add_Group_Column(rg_idn1,'EXPLAIN',CHAR_COLUMN,60);
gc_idn1 := Add_Group_Column(rg_idn1,'TAX_ID',CHAR_COLUMN,3);
END IF;
errcode := Populate_Group_With_Query(rg_idn1,'select TAX_ID,TAX_ID from TAX_RULES');
POPULATE_LIST('BILL.TAX_ID',RG_IDn1);
END;
</CODE>In the Tax Rules table, you state:
"Sub_Head_Code" field is unique
In the Bill table, you state:
Sub_Head_Code and Tax_ID are behaving like composite foreign key from Tax_Rules table
If the Sub_Head_Code is unique, then it's acting as a primary key, so Sub_Head_Code and Tax_ID in the Bill table are not behaving like a composite foreign key. The Sub_Head_Code is a foreign key, and the Tax_ID is irrelevant as far as keys are concerned.
It is not clear what it is you want to do.
If you want to display the Tax_IDs from the Bill table when you select a Sub_Head_Code from the Tax_Rules table, then change your query to:
select TAX_ID, TAX_ID from BILL where Sub_Head_Code = :Tax_Rules.Sub_Head_Code
If you want to display the Tax_IDs from the Tax_Rules table when you select a Sub_Head_Code from the Bill table, then change your query to:
select TAX_ID, TAX_ID from TAX_RULES where Sub_Head_Code = :Bill.Sub_Head_Code
If this is not what you want, then clarify what it is you want to do. Don't say:
"I want that whenever i select a "Sub_Head_Code", Only that Tax_ID which is associated with that Sub_Head_Code"
because it is not clear what tables you are referring to. -
For the past few days, I keep getting an invalid security certificate in Safari whenever I select Edit My Site from my website homepage (http://annaporterartist.com), or whenever I select anything requiring a secure log in from my website host main page (FASO.com). I have contacted technical support at my website host (fineartstudioonline.com) and they say that this has been an intermittently recurring problem in Safari for years and they recommend that I use Firefox instead. As proof of this they emailed a link to an Apple Support discussion, but it was for Mac OS X Lion v 10.7.4 and Safari 5.1, even though I told them I am using Mac OS X Mountain Lion v 10.8.2 and Safari 6.0.2. I do not get this error message anywhere else on the web using Safari. I did try Firefox and it seems to work fine, but I prefer Safari and I want to know why Safari is not working as it should be. I am concerned that there is a real security problem with my website host and I need someone to explain why I am getting this error message, what it means, and if it is, in fact, a known problem with Safari or is my website host corrupted? Really tired of technical support playing pass the buck or pretending the problem does not exist.
The specific error message is:
Their response to my inquiry and my reply is shown below:Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
From the menu bar, select
Keychain Access ▹ Preferences ▹ Certificates
There are three menus in the window. What is selected in each of them? -
How do I turn off the requirement to press control when using a function key
When using my wireless keyboard, it requires me to press controls to use the function keys (F3, F5, F70.) However, this makes it so some of my games controls won' work,(For example, in Minecraft I can't access the debug menu.) Is there any way to disable this.Thank you for your support
Please take these steps if you're prompted for a password when moving items in your home folder to the Trash.
1. Triple-click anywhere in the line below on this page to select it:
~/.Trash
2. Right-click or control-click the highlighted line and select
Services ▹ Show Info in Finder (or just Show Info)
from the contextual menu.* An Info dialog should open.
3. The dialog should show "You can read and write" in the Sharing & Permissions section. If that's not what it shows, click the padlock icon in the lower right corner of the window and enter your password when prompted. Use the plus- and minus-sign buttons to give yourself Read & Write access and "everyone" No Access. Delete any other entries in the access list.
4. In the General section, uncheck the box marked Locked if it's checked.
5. From the action menu (gear icon) at the bottom of the dialog, select Apply to enclosed items and confirm.
6. Close the Info window and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above. -
The iPod cannot be synced. The required disk cannot be found using a MAC
like the title says, this is what I get trying to put songs on my brand new shuffle. I see someone has found a solution for a windows computer, however I am a MAC man
Restore the ipod once and in setup assistant window let the option automatically sync remain checked. while the ipod started syncing immediately go to the settings page and check enable disk use and click on apply. remember this process must be done while the ipod is syncing..
-
How to test the UDA or Attribute of an ancestor member
Hi everybody !I would like to know how to test the UDA or attribute (I can use both) of the ancestor (or the parent of the parent) of the current member please ?(the current member is on level 0 et the ancestor is on level 2).I tryed some syntax but any result :(Thanks very much for your help... JaspePS : Sorry for my "bad" english, i'm french...
You can try using this IF conditional statement:if (@count (skipnone, (@uda (dimName, myUDA) and @ancest (@currmbr (dimName), -2))) == 1)where:dimName is the dimension of the level 0 member you are testingmyUDA is the UDA you are testingWhat this does is it counts the number of members that meet two criteria. First, it must have the UDA you specify and, second, it must be an ancestor of the current member at a specified level.If the current member has a level 2 ancestor with the UDA, it should return one member.
-
when trying to update my iphone 4S software to OS6 on itunes on my pc, i get an error request saying that i do not have permission to access the required resource?
Are you using iTunes version 10.7?
-
Pages & Mavericks - "The required index.xml file is missing."
I upgraded to Mavericks a few days ago, and am using the same Pages '09 (4.0.3) I was using with Snow Leopard. I wrote a text document in Pages after I did the Mavericks upgrade, and now it won't open—I get the "required index.xml file is missing" message instead. I tried a workaround suggested in this forum of changing the ".pages" suffix to ".zip," then changing it back to ".pages," but that did no good. However, text documents saved before the upgrade to Mavericks seem to open OK.
How can I rescue my work?
Thanks in advance for your help!You have 2 versions of Pages on your Mac.
Pages 5.2 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5.2 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Older versions of Pages 5 can not open files from later versions of Pages 5.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud and opened in a newer version of Pages is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Apple has removed almost 100 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Peter -
For a long time, whenever I click on a jpeg link in one of my Yahoo groups, the image simply loads in the Firefox window or tab that I'm viewing and I can simply hit the back button to return to the page I was on before. But just recently when I click on a jpeg link, Firefox asks me where I want to download the file and I have to choose between opening another tab, using Windows Photo Viewer, or selecting another program, I believe this is unnecessary and cumbersome. I would like it if Firefox would simply show me the image I'm trying to view in the same window/tab like it used to instead asking me where to download it and/or opening up a new tab when I don't really need it.
Hi Twistednerve84, <br>
At the top of the Firefox window, click on the Firefox button and then select Options to access the options window. Go to the Applications Panel and next to 'JPEG image' content type select to use your default application to view images. <br><br>
You can also find some information here: <br>
[[Firefox options, preferences and settings]] <br>
Please report back! -
How to change the required attribute of a field
Hi,
I'm using jdeveloper 10g, uix and jHeadstart to generate my application.
In my form, I have some attributes that are required and if I change a checkbox, some of these fields that was required, must now be not required.
How can I do this?
Any ideas?
Thanks!
MartinSounds like a custom validation, but you could also use a partial rendering and EL to achieve this. Lets say you could set the 'required' property of the field based on the EL expression calculating the value in the other field
-
Error : 'ResourceDictionary' root element is a generic type and requires a x:Class attribute to support the x:TypeArguments attribute specified on the root element tag.
Hi,
I get this error when i include some namespaces in my ResourceDictionary to specify a Style for a custom control.
Can anyone help me?
Thx
StardustyHi,
That's the whole point. I don't want to use x:TypeArguments on a ResourceDictionary but the compiler says it needs it.
And i don't know why.
This code give no error:
<ResourceDictionary
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:sys="clr-namespaceystem;assembly=mscorlib">
</ResourceDictionary>
And by adding 3 namespaces it gives that weard error:
<ResourceDictionary
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:controls="clr-namespace:MyTime.View.Controls"
xmlns:converters="clr-namespace:MyTime.View.Converters"
xmlns:validationrules="clr-namespace:MyTime.View.ValidationRules"
xmlns:sys="clr-namespaceystem;assembly=mscorlib">
</ResourceDictionary> -
Revision: 24018
Revision: 24018
Author: [email protected]
Date: 2012-07-11 02:23:31 -0700 (Wed, 11 Jul 2012)
Log Message:
Updates to the message to send across only required message attributes for small message format
Modified Paths:
blazeds/trunk/modules/core/src/flex/messaging/messages/AbstractMessage.java
blazeds/trunk/modules/core/src/flex/messaging/messages/AsyncMessage.java
blazeds/trunk/modules/core/src/flex/messaging/messages/CommandMessage.java
blazeds/trunk/modules/core/src/flex/messaging/messages/ErrorMessage.java
blazeds/trunk/modules/core/src/flex/messaging/messages/Message.java
blazeds/trunk/modules/core/src/flex/messaging/messages/RemotingMessage.javaIm not sure what's the problem, but let's try to figure it out. First of all explain what do you mean by "it works very bad". Doest it hang, is it slow, is quality unacceptable.
Myself, I have one problem with JMF. When i run video & audio on my Centrino 1.4 GHz, it just takes 100% CPU! And of course quality becomes degraded. Check if you have something like this.
Maybe you are looking for
-
Hello, I'm having an issue deleting a file from my home directory. This the file I want to delete .shapshot. It looks like it is shapshoting my files in my home directory. Anyway how do I stop these snapshots? This is the command I used. rm -rf /home
-
i plugged my iphone in for the first time to my itunes account and it now reads that this device is already associated with an apple id. what does that mean. i only have one apple id. and do i chose cancel or transfer?
-
Good day! When trying to view the data (in SQLDeveloper) of an external-organized table, an error dialog pops up with an ORA-02031 error: ORA-02031:No ROWID for fixed tables or external-organized tables. Vendor code 2031
-
Possibility of Focusing to a Specific Org Unit ?
Hello Everyone, We are using Nakisa v4.1 and a live build. I wonder whether the below action is possible or not; When a manager logs into the system, the OrgChart Module will display all the organizational units BUT will focus to the organizational u
-
Multithread don't work....help
Sorry, this code is a little bit huge. Basically, I want the train can move from stationX, stationY and stationZ forever. And the passenger can get on or leave the train at different station. The class Schedule is extenting from Thread. I have tried