JDeveloper 10.1.3 and portal extension

Hi,
Was the Portal Extension for developing portlets using the wizard upgraded for use with Oracle JDeveloper 10.1.3 or is this JDeveloper extension only compatible with the previous version 10.1.2 ?
If I upgrade to the latest version of JDeveloper 10.1.3.1 will I get this feature ?
Thanks,
Edwin.

"The Portal Extension for Oracle JDeveloper is not yet available for Oracle JDeveloper 10.1.3, please check back at a later date."
http://www.oracle.com/technology/products/ias/portal/pdk.html

Similar Messages

Portals Extensions for JDeveloper 10.1.3

Hi
I am trying to install the portal extensions for Jdeveloper, I get the following error when I run Jdeveloper after the install command
java -jar C:\portal-addin-install.jar C:\Jdeveloper
The error is
java.lang.NoClassDefFoundError: oracle/ide/addin/Addin
Severe(2,369): No class def found for addin oracle.webdb.jdev.PortletDevelopmentAddin
Can someone help??
Thanks,
Savithri ([email protected])

The extension installer was for JDev 10.1.2 and 9.0.5. JDeveloper 10.1.3.2 comes with an up to date version of the portlet creation extension.

JDeveloper version for Portal Extension

Will the Portal Extension for
JDeveloper work with JDeveloper
version 9.0.4?

Is it possible to configure the PDK to work with the current version of JDeveloper (10.1.3.0.4.3673)?
I followed the instructions on the web site and get errors:
Severe(2,369): No class def found for addin oracle.webdb.jdev.PortletDevelopmentAddin
Warning(0,0): This extension was written for a previous version of {0} and may not run properly.
Warning(0,0): To switch off these warnings, set the system property ide.extension.legacy.nowarn=true.
Warning(0,0): To disable all incompatible extensions, set the system property ide.extension.legacy.disabled=true.
Portlets shows up in the Web Tiers, but no objects in the items window.

Portal extension plugin for JDeveloper release 10.1.3

Metalink Note:356550.1 says 'The expected time of arrival is second quarter 2006' [for portal extension plugin for JDeveloper release 10.1.3].
When will this be available for customer use? We notice it can already be downloaded from an internal Oracle website.
Thanks,
Jon

Hi,
expectation is this month or early next year. The version of JDeveloper is 10.1.3.2. Maybe if you ask this question on the portal forum they have a more precise date
Frank

Jdeveloper with BPEL and OA Extension.

Hi,
Can someone point me to the right download and version of JDeveloper for BPEL and OA Extensions together.
Thanks,
--KC.

Yes,
You need to have separate versions. Check the metalink Note 416708.1 - How to find the correct version of JDeveloper to use with eBusiness Suite 11i or Release 12.
For BPEL related dependency, check the help docs of process manager installed on your application server.
--Shiv

Installing the Oracle JDeveloper 10g Portal Extension

i have followed all the steps to install jdev portal extension but i am not able to see Java Portlet and Oracle PDK Java Portlet portlets in web tier..what could be the reason

Hi,
Did you notice any errors during the installation ? i.e, when you install the Portal Addin Jar File..
Regards,
Sandeep

WebLogic Workshop Portal Extension in workshop 10.1

I used Workshop 10.0 and have on the menu some features such as File - New - Portal Web Project and Windows - Portal Perspective
However, when I installed the Workshop 10.1 (I try both on the same BEA_HOME and on a new directory), I could not find these menu items anymore.
Looking at the Workshop 10.0 - manage Configuration, I saw that a plugin is installed : BEA_HOME/wlserver_10.0//portal/eclipse
I tried to copy this portal directory to the new wlserver_10.0 of the Workshop 10.1, the Manage Configuration showed that the extensions is succesfully installed. However, I still could not see the Portal Perspective (even with open perspective - Other; there is no Portal item in the list of available Perspective).
Does anyone know how to get the Portal extension in Workshop 10.1? Thanks in advance.
Nguyen

There are no currently-released versions of the WebLogic Portal plugins
that are compatible with Workshop 10.1. The plugins that you found are
only compatible with Workshop 10.0. The next release of WLP (currently
scheduled for later this year) will include a Workshop install with
integrated portal features.
- Konstantin

FIM Service and Portal Installation Ends Prematurely

Hello All,
I'm in the process of setting up a new production FIM 2010 R2 server. I have already installed the FIM synchronization service and I was able to install this successfully.
I have already installed SharePoint services (WSS 3.0) and configured it for FIM. But when I try to install the FIM Service and Portal.
I keep getting and error that says " FIM Service and Portal Installation Ends Prematurely" with no other details. If anybody has any advice please let me know.
I have already installed everything on a stand alone box in a dev environment and it all works correctly however I am unable to now install in a production environment

Cameron is right - you should consider FIMService account nearly as normal AD account for user*
An installer account should be admin on the box, where you are installing FIMService and he should be sysadmin on SQL during installation of FIMService. An installer account should be other than FIMService account itself.
*FIMService account:
Lock down the Service Account
The service account should not be used by any other services or users. The account must not be used to logon interactively and requires no access to any additional resources beyond those granted during setup. The service account is used to provide the security
context for the MIIS service as it accesses resources on the MIIS server and the associated database. It also provides the security context for the execution of any rules extensions.
Lock down the service account to ensure no malicious user is able to sign in using its credentials and gain access to MIIS data. Configure Group Policies to lock down the account and restrict access to this account. Since the MIIS service only needs the account
to run as a service, restrict the account as follows:
Deny logon as a batch job.
Deny logon locally.
Deny logon through Terminal Services.
Deny access to this computer from the network.
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.
Good topic for a Wiki article:
http://social.technet.microsoft.com/wiki/contents/articles/23330.technet-guru-contributions-for-march.aspx
Thanks Dominic and Jose!
Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Problem:JDeveveloper 11g and JUnit Extension against a JDK 5 Project

We've got a project that requires JDK 5, and would like to run our JUnit tests using the integrated JUnit Extension in Jdeveloper 11g.
However, we are getting the following error: java.lang.UnsupportedClassVersionError: Bad version number in .class file
Presumabily, this is because the JUnit classes are JDK 6, since the tests work if we switch our project to use JDK 6.
Of course, the problem is: Our project requires JDK 5. =)
Anyone have a workaround?
Thanks,
- Bill

Hi,
JDeveloper is on JDK 1.5, How can I configure it to be 1.4??
I had the JDeveloper 10.1.3 also and it went ahead with some updates and now even that shows me that it's version is JDK 1.5
The latest error I get from JDeveloper(From both 11g and 10.1.3) is here,
Invoking loadjava on connection 'HR_CapRock_DEV' with arguments:
-order -resolve -thin
errors : class package1/mypackage/JavaStoredProc
ORA-29521: referenced name java/lang/StringBuilder could not be found
The following operations failed
class package1/mypackage/JavaStoredProc: resolution
oracle.aurora.server.tools.loadjava.ToolsException: Failures occurred during processing
     at oracle.aurora.server.tools.loadjava.LoadJava.process(LoadJava.java:863)
     at oracle.jdeveloper.deploy.tools.OracleLoadjava.deploy(OracleLoadjava.java:116)
     at oracle.jdeveloper.deploy.tools.OracleLoadjava.deploy(OracleLoadjava.java:46)
     at oracle.jdevimpl.deploy.OracleDeployer.deploy(OracleDeployer.java:97)
     at oracle.jdevimpl.deploy.StoredProcHandler.doDeploy(StoredProcHandler.java:473)
     at oracle.jdevimpl.deploy.StoredProcHandler.doDeploy(StoredProcHandler.java:360)
     at oracle.jdevimpl.deploy.StoredProcHandler.doDeploy(StoredProcHandler.java:284)
     at oracle.jdevimpl.deploy.StoredProcProfileDt$Action$1.run(StoredProcProfileDt.java:383)
#### Deployment incomplete. #### Jun 18, 2007 10:17:31 AM
*** Note ***
One possibility for the deployment failure is that the target Database may not support JDK version 1.5. Updating your Project Properties compiler Source & Target to an earlier release could fix this problem.
How can I either downgrade JDK on the compiler(JDeveloper) to be 1.4 or, How can I resolve the error,
ORA-29521: referenced name java/lang/StringBuilder could not be found
Thanks,
Sujith

SSO between Portal Application and Portal Admin Tool

Hi All,
We have a requirement for implementing SSO between a Portal application and
Portal admin tool.
We are using WL Portal 8.1 SP4.
Here is the reason for this requirement -
A user logged-into Portal Application needs to login to Portal Admin tool to
do some admin activity. We want to provide a link in the portal application
using which the user can directly login to the Portal Admin tool without
having to enter the credentials again.
If someone has any info on how to implement this, can you please point me in
the right direction.
Thanks,
~Deepak

Hi,
When creating PP you have 2 options
PP used for compiling and PP used for Building
You create PP with all the libraries into Developing/Compiling Other DCs
And another PP with all the libraries into can be packaged into other build results (SDAs).
Once you have these 2 PP in place you add the DC as used DC.
And this should resolve the issue.
Hope this helps.
Cheers-
Pramod

Midtier removal of Forms and Reports and Portal failing

Hi
I am having an issue removing the midtier of a forms/Report/BI and portal midtier,
The deconfigtool.pl hang and I am recieving the following message in a deconfigportal.log.
Invoking OPCA in DEINSTALL mode with the following arguments :
Install Mode : DEINSTALL
Portal Schema : portal
Connect String : cn=orcl,cn=oraclecontext
OID Host : hresources
OID Port : 389
OID Admin DN : cn=orcladmin
Use SSL to OID : N
Drop mode : midtier
STEP 1 : Deleting Portal Partner application
Parameters passed to SSO registration tool :
param0:-oracle_home_path param1:D:\Oracle\CoreMid param2:-config_sdk_papp param3:TRUE param4:-papp_schema param5:portal param6:-old_lsn_token param7:hresources.ncirl.ie param8:-update_mode param9:DELETE param10:-papp_password param11:**** param12:-pappDBConnect param13:cn=orcl,cn=oraclecontext param14:-ssoDBConnect param15:cn=orcl,cn=oraclecontext param16:-pass param17:**** param18:-schema param19:orasso_pa
-DinstallType=
-DoldOracleHome=
-DoldOHSUser=SYSTEM
Check D:\Oracle\CoreMid\sso\log\ssoreg.log for details of this registration
SSO registration tool failed. Please check the log file D:\Oracle\CoreMid\sso\log\ssoreg.log, correct the problem and re-run the tool.
STEP 2 : Deleting Portal DAD
STEP 3 : UDDI deinstallation
STEP 4 : Ultrasearch deinstallation
Anyone know how to get around this.

And what does D:\Oracle\CoreMid\sso\log\ssoreg.log say?
Thanks
Shail

SSo between Portal 6.0 and Portal 7.0

Hi,
We want to enable single sign on between Portal 6.0 and Portal 7.0.
Our scenario is, In Portal 7.0 on click of role or workset, Portal 6.0 have to be opened in a new window without asking user ID and Password.
What are the steps, I need to follow to achieve this.
Thanks & Regards,
Bala

Hi Bala,
This [thread|Re: SSO between ep6 and ep7]should give you a kick start.
Good Luck!
Sandeep Tudumu

Facelets and jsf-extensions problem.

I'm fairly certain I've run into a problem between facelets and jsf-extensions. I'm working with JSF 1.2 RI, Woodstock, Facelets 1.1.13, on Tomcat 6.
When trying to get Woodstock autoValidation to work I get a javascript error the "I has no properties". The error occurs in the com_sun_faces_ajax.js file in the jsf-extensions-dynamic-faces-0.1.jar (I've used both the RC4 and a build today ,10/18/07 from source with the same results). Here is the code snippet where it happens (with my comment).
var I = G.getElementsByTagName("components")[0];
var C = I.getElementsByTagName("render");
for(var F = 0; F < C.length; F++) {
In the second line there it looks like the variable I is null, but based on the post response below I don't know why.
The response from the post looks like this:
<partial-response><components><render id="PayableForm:vendorGci"><markup><![CDATA[{"valid":true,"id":"PayableForm:vendorGci"}]]></markup></render></components>
However the server side code (validation method) never gets executed. I'm willing to do some digging and debug work, but I'd need to be pointed in the right direction.
The following is more potentially useful code snippets.
Here is the textField code:
<w:form id="PayableForm">
<w:textField style="display:none;" />
<w:message for="vendorGci" />
<w:label id="vendorGciLabel" for="vendorGci" text="Vendor: " />
<w:textField id="vendorGci" autoValidate="true"
text="${vendorBean.searchGci}" maxlength="8" required="true"
validatorExpression="#{ vendorBean.validateVendor}" />
Here is the javascript in the page (the init function is called from the body: onLoad="setTimeout('init();', 0);" , this does happen):
<w:script type="text/javascript">
function VendorListener(){
function VendorNotify(props){
alert("VendorNotify called!"); <--------------- I never see this alert message
if ( props.id != "PayableForm:vendorGci") { return; }
var field = document.getElementById("PayableForm:vendorGciLabel");
field.setProps({
valid: props.valid
VendorListener.prototype.notify = VendorNotify;
function initAccountRows(){
var table = document.getElementById("PayableForm:vendorAccountTable");
table.initAllRows();
function init(){
initAccountRows();
var listener = new VendorListener();
dojo.subscribe(
webui.suntheme.widget.textField.event.validation.endTopic ,
listener, listener.notify);
Here is the validator method. It currently doesn't do anything, just trying to get something to work. I never see the output, and I never hit the breakpoint in the method.
public void validateVendor(FacesContext context, UIComponent comp, Object value){
System.out.println("**********************************");
System.out.println("validateVendor called");
System.out.println(value);
System.out.println("**********************************");
}

Actually I don't need a global variable. I need to refer in my included template the actual backing bean used in the current page. As all my backing bean extends a abstract class I could bind my component to a property of the current backing bean, no matters which one. Just like a polymorphic call but without the parameter. Let's imagine I could get this object of the facesContext object I would be able to do:
<rich:datascroller renderIfSinglePage="false" align="right" for="listagem" maxPages="12" fastStep="10"
pageIndexVar="pageIndex" pagesVar="pages" stepControls="show" fastControls="hide" boundaryControls="show"
inactiveStyleClass="paginacaoInativa" selectedStyleClass="paginacaoSelecionada"
styleClass="paginacao" tableStyleClass="paginacaoTabela"
binding="#{facesContext.currentBackingbean.formDataScroller}" id="paginacao">
Instead of pass the backing bean to the ui:param of this template... Dou you get the point?

SSO and portal timeout -- other bug?

...this is very probably related to the other post talking about SSO and portal timeout...
I am having another weird issue with dotnet portlets that uses inline refresh (done automatically by dotnet accelerator) and SSO.
When you let the portal session expire, and then click on a button/link within a portlet (hence generate an inline refresh gatewayed request), the full portal window (header/footer etc...) appears within the portlet, instead of the portlet content alone.
I did some http traces (see below) and it seems the problem is due to the windows SSOLogin.aspx (we are using windows auth SSO) not taking the requested portlet gatewayed request url as a post login redirect info... but taking instead the current page url (which is wrong)
Thus, after the gatewayed portlet request is successfully authenticated by the SSOLogin.aspx component, it is automatically redirected to the wrong urll...making the full portal page refresh into the portlet.
So my question is: have anyone already seen such behavior? And has anything been done to fix this?
It really seems like a bug with the SSO servlet...but maybe i am doing something wrong...Just want to have your thoughts on this.
Thanks,
Fabien
============================================================================================
HTTP Trace:
POST     302     Redirect to /portal/sso/SSOLogin.aspx?in_hi_userid=15046&space=CommunityPage&parentid=1&cached=false&control=SetCommunity&PageID=0&CommunityID=205&parentname=Login     http://your.portal.com/portal/server.pt/gateway/PTARGS_0_15046_362_205_0_43/http%3B/your.portletserver.com/yourapp/youraspx.aspx
GET     401     text/html     http://your.portal.com/portal/sso/SSOLogin.aspx?in_hi_userid=15046&space=CommunityPage&parentid=1&cached=false&control=SetCommunity&PageID=0&CommunityID=205&parentname=Login
GET     401     text/html     http://your.portal.com/portal/sso/SSOLogin.aspx?in_hi_userid=15046&space=CommunityPage&parentid=1&cached=false&control=SetCommunity&PageID=0&CommunityID=205&parentname=Login
GET     302     Redirect to http://your.portal.com/portal/server.pt?in_hi_userid=15046&space=CommunityPage&parentid=1&cached=false&control=SetCommunity&PageID=0&CommunityID=205&parentname=Login     http://your.portal.com/portal/sso/SSOLogin.aspx?in_hi_userid=15046&space=CommunityPage&parentid=1&cached=false&control=SetCommunity&PageID=0&CommunityID=205&parentname=Login
GET     200     text/html; charset=utf-8     http://your.portal.com/portal/server.pt?in_hi_userid=15046&space=CommunityPage&parentid=1&cached=false&control=SetCommunity&PageID=0&CommunityID=205&parentname=Login

I have this happen in v6.0 sp1. We have worked around the problem with a bit of work and synchronization of settings. Below, I've outlined how we've worked around the problem (which is indeed a problem that should be fixed). Also, if you have a load balancer, you'll need to set your session timeout on the load balancer to a bit more than the refresh rate that you set for your communities and My Pages.
Resolving the Portlet Timeout / Refresh Problem in ALUI Portal_
Problem: Users occasionally receive the portal page within a portlet error
Cause: The root cause has not been determined; however it appears that the primary event that exhibits the behavior is when a teammember’s session has expired on the portal server and they then utilize a .NET form-based portlet which refreshes in place. Because we are using WIA SSO to enable automatic logins to the portal, it makes the error seem to occur randomly.
Resolution:
The workaround solution is to – 1) increase the portal session timeout on the portal web servers from the default 20min to 4 hours, and 2) set the MyPage refresh interval setting for all portal users to 3 hours. The setting name is a bit of a misnomer, as it will actually refresh the entire portal page automatically if the user is idle on either a My Page or a Community Page, as these are the only two places that portlets reside.
Increasing the portal session timeout:
The portal session timeout is controlled in two places, and both settings should match. On the portal virtual directory in IIS, edit the configuration and increase the timeout setting to 240 (minutes). Then, edit the portal application’s web.config file (d:\portal\ptportal\6.0\webapp\portal\web\) and increase the sessionState Timeout variable to 240. Editting the config file will require you to restart the services before you see the change.
Initial setting of the MyPage refresh interval:
The initial setting will need to be done by a SQL script in order to apply it to all existing users. The Default Profile should also be updated so that all new user synched from AD will have this setting applied automatically.
/* Delete refresh interval settings for all users first so that there are no conflicts on the inserts */
DELETE FROM portaldbuser.ptprefs WHERE prefname = 'intMyPageRefreshRate'
/* Insert desired page refresh setting for all users */
INSERT INTO portaldbuser.ptprefs (userid,gadgetid,prefclassid,prefobjectid,prefname,prefvaluetype,prefvalue,pagenumber) SELECT objectid,0,0,0,'intMyPageRefreshRate',3,180,0 FROM portaldbuser.ptusers
From Administration, access the Default Profiles utility. Check the Default Profile entry and click on the Edit Profile Layout link. Click on the My Account link in the Portal Settings portlet and then on the Display Options link on the next page. In the Page and Portlet Settings, update the Your My Page will be updated: setting to 4 hours. Click Finish twice to return to Administration.
Updating the MyPage refresh interval:
To update the setting just modify the insert portion of the SQL script. Change the prefvalue number (180) to the desired timeout in minutes and rerun both statements of the script.
The Default Profile should be also be modified per the instructions above.
I hope this helps...
-tom

SSO and Portal down after upgrade from AS 10.1.2.0.2 to 10.1.2.3

SSO and Portal is down after upgrade from AS 10.1.2.0.2 to 10.1.2.3. All others are running fine. Any similiar experience and solution?
Thanks.
Andy

cn=XXX information is missing for the SSO Server (orasso) when going to http://servername:7777/pls/orasso/orasso.home. Is that causing the problem? If so, how can I resolve it?
Thanks.
Andy

JDeveloper 10.1.3 and portal extension

Similar Messages

Maybe you are looking for