Jdeveloper 11 cannot find tables when creating EJB3.0

jdev: 11.1.1.0.2
database: SQLServer 2005
If I choose EJB2.1, as soon I select the schema, available tables are displayed (with auto query on) right away; but if I choose EJB3.0, the tables just won't show up!
Procedure:
- Create an application;
- Create an EJB project (select EJB3.0); // would work if I select 2.1 here!
- Create an EJB -> entities from tables.
Did anyone experience this?
Regards.

hi,
I think you can see a query button on the dialog after selecting the schema. Press query button it will display the tables present in the database schema you are connected
Morgan.

Similar Messages

  • HT1473 I am trying to upload my itunes music from my ipod to my computer.  My current Itunes library is listing the songs, but cannot find them when I try to put them on to my iphone.

    I am trying to upload my itunes music from my ipod to my itunes on my computer.  My itunes music lists all of the music, but cannot find it when I try to load it to my phone.
    The songs are on my ipod, but not on my phone and I don't know how to get them from one device to the other.

    In your case, it would be better to have transferred the library to an external drive from the PC. Then, connect it to the iMac and put the library onto the Music folder.
    You used Migration Assistant, and it creates a new user with the transferred data.
    Open  > Log Out, and log in the new user. Then, open a Finder window, choose Music in the sidebar and you will see the iTunes library. Now, you have to move the iTunes library to /Users/Shared (select Go menu -in the menu bar- > Go to Folder, type that and copy the iTunes library to it). Finally, log in the other user, go to the same folder and move the library to the Music folder.
    After doing that, open System Preferences > Users and Groups, choose the user created by Migration Assistant and press the - button to remove it. This is easier if you have an external drive

  • Curve Sync to Outlook - Cannot find table in system file

    I have just upgraded from a Pearl to a Curve, loaded the desktop software and tried to sync to my MS Outlook, but it gives an error message "Cannot find table in system file".
    I found a thread which pointed to a solution (ID KB15278), but this did not work.  The final step in that solution is to uninstall and reinstall the desktop software, and when I try to do that via Control Panel, it won't remove the software.  I seem to have both Version 4.2 and 4.7 of the software on my PC.
    Anyone got any suggestions?
    Solved!
    Go to Solution.

    the following article from the public knowledge base will certainly be helpful.
    http://www.blackberry.com/btsc/KB02206
    Perform a clean uninstall of BlackBerry Desktop Software
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Cannot select name when creating new DC

    Hi all,
    It seems I encounter this kind of problems over and over again when dealing with NWDI )-:
    In this thread Cannot select vendor when creating new DC I couldn't select vendor.
    I installed a new NWDI system (version is 7.18), did all the post installation steps including the configuration of a name server on the SLD but I cannot select "name" and the vendor I entered is not shown (even if enter it manually I cannot select name so it doesn't help - see snapshot).
    [snapshot|http://img134.imageshack.us/i/nwdi.jpg/]
    Snapshot: http://img134.imageshack.us/i/nwdi.jpg/
    I did name server config on : http://server:port/dtr/system-tools/administration/NameServerConfiguration
    Name prefixes are defined under 'Name Reservation -> Development Component Name' - I used <x.y>/* and <x.y>/tst (x.y is namespace like com.omri).
    I updated CMS after setting the name server, restart J2EE and did all kind of voodoo without success.
    I use local SLD which is part of the J2EE.
    I don't get any error messages (from NWDI/SLD/NWDS).
    I don't remember this kind of problem with NWDI on 6.40 versions.
    Moreover I installed and configured several systems on 7.12 & 7.13 versions without any problems but with 7.14 & 7.18 I've problem with setting the name server...
    Please help,
    Thanks,
    Omri

    Solved it on my own by deleting and creating the track again (with the same settings!!!)

  • How to add multiple table when creating add on using b1de

    Hi all,
    Plz help me
    How to add multiple table when creating add on using b1de.
    Thanks

    Hi dns_sap,
    Can you explain a little better what you are trying to accomplish? Is it to create UserTables and UserFields in the database, when the addon runs the first time?
    If so, you can use the following code
    Add User Table
            Try
                Dim lRetCode As Long
                Dim oUDT As SAPbobsCOM.UserTablesMD = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserTables)
                oUDT.TableName = TableName
                oUDT.TableDescription = TableDescription
                oUDT.TableType = TableType
                lRetCode = oUDT.Add
                '// Check for error when adding the Table: if lRetCode = 0 the table was created; if lRetCode = -2035 the table already exisits
                If lRetCode <> 0 Then
                    oApplication.MessageBox("Error: " & lRetCode.ToString & ", " & oCompany.GetLastErrorDescription)
                End If
            Catch ex As Exception
                oApplication.MessageBox(oCompany.GetLastErrorDescription)
            Finally
                System.Runtime.InteropServices.Marshal.ReleaseComObject(oUDT)
                oUDT = Nothing
                lRetCode = Nothing
                GC.Collect()
            End Try
    Add User Field
    Try
                Dim lRetCode As Long
                Dim oUDF As SAPbobsCOM.UserFieldsMD = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserFields)
                oUDF.TableName = TableName
                oUDF.Name = FieldName
                oUDF.Description = FieldDescription
                oUDF.Type = FieldType
                lRetCode = oUDF.Add
                '// Check for error when adding the field: if lRetCode = 0 the field was created; if lRetCode = -2035, the field already exists
                If lRetCode <> 0 Then
                    oApplication.MessageBox("Error: " & oCompany.GetLastErrorCode & ", " & oCompany.GetLastErrorDescription)
                End If
            Catch ex As Exception
                oApplication.MessageBox(oCompany.GetLastErrorDescription)
            Finally
                System.Runtime.InteropServices.Marshal.ReleaseComObject(oUDF)
                oUDF = Nothing
                lRetCode = Nothing
                GC.Collect()
            End Try
    Regards,
    Vítor Vieira

  • Cannot find Acc when right click

    Well i am trying to convert my mp3 to a Acc and cannot find acc when i right click on the song. Ive tried going into my export and changing it to Acc encoder already and still nothing.

    Leandre22 wrote:
    Well i am trying to convert my mp3 to a Acc
    Why are you trying to convert MP3 to AAC?
    This is not really needed unless you require an AAC file.

  • How enter the values in to table when create entries option is not working

    hi everyone,
         can u please tell me How enter the values in to table when create entries option is not working.
    it's urgent.
    thanking u all

    Hi Shree,
    how many entries u want to insert ,,
    is it a ztable or custom table ..
    just tell me ur clear requirement ..
    clarify the same ..
    if no options avaliable then if its less entries or some value u can do it through debugging ..
    if its bulk entries then u can write a program ..
    just let me know ..
    regards,
    VIjay

  • Cannot find lib when packaging for iOS

    You can see the same question on StackOverflow here:
    http://stackoverflow.com/questions/11547515/cannot-find-lib-when-packaging-for-ios
    Hi,
    I am developping an Air Native Extension (ANE) in order to be able to use the burstly(1) ads on mobile devices.
    As for my setup, I am using the FlashDevelop 4.0.4(2) and Adobe Air 3.3 (3). I'm using Flex 4.6.0 SDK. The project is setup on Windows7.
    In order to work on iOS devices, Burstly requires a number of frameworks and librares (4)
    I managed to write and compile the .a library for iOS. I also have the interface (actionscript code) that will be shared for Android and iOS compiled into a swc and a librairy.swf. All of this is successfully packaged into a .ane which is included in my project.
    When compiling a .a library on MacOS, all the framework and library used don't seems to be packaged in the ".a". This is why I had to use Air 3.3, for the -platformsdk option(5).
    Since I work on Windows, I followed the instruction in this post to get the iOS SDK (6).
    Following (4) and (5), I made a platformConfig.xml file like this, which is packaged in the .ane
        <platform xmlns="http://ns.adobe.com/air/extension/3.1">
            <sdkVersion>4.2</sdkVersion>
            <linkerOptions>
                <!-- to use the AssetsLibrary framework -->
                <option>-framework AssetsLibrary</option>
                <option>-framework AudioToolbox</option>
                <option>-framework AddressBook</option>
                <option>-framework AVFoundation</option>
                <option>-framework CFNetwork</option>
                <option>-framework CoreLocation</option>
                <option>-framework MapKit</option>
                <option>-framework MediaPlayer</option>
                <option>-framework MessageUI</option>
                <option>-framework OpenAL</option>
                <option>-framework OpenGLES</option>
                <option>-framework QuartzCore</option>
                <option>-framework StoreKit</option>
                <option>-framework SystemConfiguration</option>
                <option>-framework Foundation</option>
                <option>-framework CoreGraphics</option>
                <option>-libsqlite3</option>
                <option>-libxml2</option>
                <option>-libz</option>
            </linkerOptions>
        </platform>
    and this is the line to compile the actuale .ane
        call "%FLEX_SDK%\bin\adt" -package -target ane ../release/burstlyadsextension.ane extension.xml -swc burstlyAds.swc -platform iPhone-ARM library.swf libBurstlyAds.a -platformoptions platformConfig.xml
    Problem arises when I try to package the iOS app with ADT:
        call adt -package -target %TYPE%%TARGET% %OPTIONS% %SIGNING_OPTIONS% "%OUTPUT%" "%APP_XML%" %FILE_OR_DIR% -extdir lib/external/ -platformsdk ../Libraries/iPhoneOS5.0.sdk/
    this happens:
    "ld: library not found for -libsqlite3
    Compilation failed while executing : ld64"
    frameworks seems to be added fine, but the dylib are not. I tried to add the line:
        <option>-L usr/lib/</option>
    before including the lib, but I got this error instead:
    "ld: warning: directory not found for option '-Lusr/lib/'
    ld: library not found for -libsqlite3
    Compilation failed while executing : ld64"
    I tried to use the full path, other relative path, but no matter what path I put in the option, I always get a "warning: directory not found for option". Even "<option>-L ../</option>" give me this warning. The only thing that seems to work is "<option>-L /../</option>", but my .dylib obviousle are not there.
    So my questions are: What did I do wrong? Any idead what else I could try? Even an explanation as to why it is not working would be helpful!
    Links:
    #1: http://support.burstly.com/
    #2: http://www.flashdevelop.org/
    #3: http://get.adobe.com/fr/air/        //Sorry, my OS is in french
    #4: http://support.burstly.com/kb/ios/required-compiler-flags-frameworks
    #5: http://blogs.adobe.com/rajorshi/2011/11/16/ios5-support-for-airusing-external-sdks-to-pack age-apps/
    #6: http://blogs.adobe.com/airodynamics/2012/05/18/using-platformsdk-for-ios-on-windows/

    Thanks a lot, that took care of the
    "ld: library not found for -libsqlite3
    Compilation failed while executing : ld64"
    But now, I'm stuck with this error instead:
    ld: warning: -ios_version_min not specificed, assuming 4.0
    Undefined symbols for architecture armv7:
      "_ADBannerContentSizeIdentifier480x32", referenced from:
          +[Burstly_iad_Adaptor initializeContentSizeIdentifiers] in libcom.bhvr.burstlyads.a(Burstly_iad_Adaptor.o)
          -[Burstly_iad_Adaptor supportedSizes] in libcom.bhvr.burstlyads.a(Burstly_iad_Adaptor.o)
      "_OBJC_CLASS_$_ADBannerView", referenced from:
          objc-class-ref in libcom.bhvr.burstlyads.a(Burstly_iad_Adaptor.o)
      "_OBJC_CLASS_$_EKEventStore", referenced from:
          objc-class-ref in libcom.bhvr.burstlyads.a(BurstlyORMMAView.o)
      "_OBJC_CLASS_$_FlurryAnalytics", referenced from:
          objc-class-ref in libcom.bhvr.burstlyads.a(Burstly_flurry_Adaptor.o)
      "_OBJC_CLASS_$_CMMotionManager", referenced from:
          objc-class-ref in libcom.bhvr.burstlyads.a(BurstlyORMMAJavascriptBridge.o)
      "_ADBannerContentSizeIdentifier320x50", referenced from:
          +[Burstly_iad_Adaptor initializeContentSizeIdentifiers] in libcom.bhvr.burstlyads.a(Burstly_iad_Adaptor.o)
          -[Burstly_iad_Adaptor supportedSizes] in libcom.bhvr.burstlyads.a(Burstly_iad_Adaptor.o)
          -[Burstly_iad_Adaptor makeSizesSetWithArray:] in libcom.bhvr.burstlyads.a(Burstly_iad_Adaptor.o)
      "_MedialetsShouldLogDebug", referenced from:
          -[MedialetsAdServer sendAppPixelWithURL:] in libcom.bhvr.burstlyads.a(MedialetsAdServer.o)
          -[MedialetsAdServer adFitsSlot:adID:] in libcom.bhvr.burstlyads.a(MedialetsAdServer.o)
          -[MedialetsAdServer nextAdFromList:forTargetKey:keywords:andBlockKeywords:] in libcom.bhvr.burstlyads.a(MedialetsAdServer.o)
          -[MedialetsAdServer isAdValidForSlot:forTargetKey:keywords:andBlockKeywords:] in libcom.bhvr.burstlyads.a(MedialetsAdServer.o)
          -[MedialetsAdServer nextAdForAdView:] in libcom.bhvr.burstlyads.a(MedialetsAdServer.o)
          -[MedialetsAdServer startCacheLoad] in libcom.bhvr.burstlyads.a(MedialetsAdServer.o)
          -[MedialetsAdServer processReceivedData:] in libcom.bhvr.burstlyads.a(MedialetsAdServer.o)
      "_OBJC_CLASS_$_EKEvent", referenced from:
          objc-class-ref in libcom.bhvr.burstlyads.a(BurstlyORMMAView.o)
      "_ADBannerContentSizeIdentifierPortrait", referenced from:
          +[Burstly_iad_Adaptor initializeContentSizeIdentifiers] in libcom.bhvr.burstlyads.a(Burstly_iad_Adaptor.o)
      "_OBJC_CLASS_$_CTTelephonyNetworkInfo", referenced from:
          objc-class-ref in libcom.bhvr.burstlyads.a(BurstlyUtils.o)
      "_ADBannerContentSizeIdentifierLandscape", referenced from:
          +[Burstly_iad_Adaptor initializeContentSizeIdentifiers] in libcom.bhvr.burstlyads.a(Burstly_iad_Adaptor.o)
      "_MedialetsShouldLogInternal", referenced from:
          -[MedialetsAdServer init] in libcom.bhvr.burstlyads.a(MedialetsAdServer.o)
          -[MedialetsAdServer qualifiedAdsFromList:forAdView:] in libcom.bhvr.burstlyads.a(MedialetsAdServer.o)
          -[MedialetsAdServer qualifiedAd:foradSlotKey:] in libcom.bhvr.burstlyads.a(MedialetsAdServer.o)
          -[MedialetsAdServer nextAdFromList:forTargetKey:keywords:andBlockKeywords:] in libcom.bhvr.burstlyads.a(MedialetsAdServer.o)
          -[MedialetsAdServer nextAdForAdView:] in libcom.bhvr.burstlyads.a(MedialetsAdServer.o)
          -[MedialetsAdServer attemptCacheLoad] in libcom.bhvr.burstlyads.a(MedialetsAdServer.o)
          -[MedialetsAdServer startCacheLoad] in libcom.bhvr.burstlyads.a(MedialetsAdServer.o)
      "_OBJC_CLASS_$_FlurryAppCircle", referenced from:
          objc-class-ref in libcom.bhvr.burstlyads.a(Burstly_flurry_Adaptor.o)
      "_OBJC_CLASS_$_ADInterstitialAd", referenced from:
          objc-class-ref in libcom.bhvr.burstlyads.a(Burstly_iad_Adaptor.o)
    ld: symbol(s) not found for architecture armv7
    Compilation failed while executing : ld64
    Which is the same error as when I did not include any library at all.
    Any other insight?

  • Cannot find picture when transferring from Aperture to PSE 11

    Cannot find picture when transferring from Aperture to PSE 11
    I have an older version of PSE and when I transferred a picture from Aperture to PSE9 it would open PSE9 and show the picture.
    I set the Preps in Aperture for PSE 11 and the PSE 11 opens but no picture in the box or photo bin or in the top left "open".
    I changed the Aperture setting to the PSE Organizer and the same thing happened Organizer open BUT there was no picture to be found.
    In Aperture it shows the file being transferred.
    I looked in the PSE 11 preps and file but could not find anything.
    The fact that it opens the PSE 11 app tells me it is being recognized but the picture (file) is going somewhere else.
    Thanks
    Greg

    Hi Greg
      Make sure you are linking to the application in Support Files and not to an alias.

  • Cannot find file when starting jnlp from browser

    First of all, im not a web guru, so sorry for my weak knowledge on that part.
    I have a swing application packed in a war file.
    In the root of war file i put my jnlp, html that links to jnlp, and jar file. (everything created with NetBeans)
    But there is also a directory "data" inside war where i hold some files.
    My application is accessing those files at runtime. (those are save files for my game)
    So, when i start jnlp directly everything is fine, but when i start jnlp through html link, i got error message:
    SEVERE: null
    java.io.FileNotFoundException: data\options.data (The system cannot find the path specified)
         at java.io.FileInputStream.open(Native Method)
         at java.io.FileInputStream.<init>(Unknown Source)
         at java.io.FileInputStream.<init>(Unknown Source)
            ...Java Web Start starts correctly, i can see my first panel of the application, but when i proceed (application tries to load save file), it can not find that file (options.data) obviously.
    How is it possible that everything works fine when i start jnlp directly, and it fails when i start it through the browser?
    What is the problem here?
    Thanks for the help!

    Adoendithas wrote:
    SEVERE: null
    java.io.FileNotFoundException: data\options.data (The system cannot find the path specified)
    Of course the JRE is not going to find a data\options.data on my PC, which is where it will look for it, if your software is running on my PC. Resources for JWS projects must either be available as an URL from the server, or downloaded locally to the user's local file system before they can be used as files. Why it fails to find it on your PC is probably that the 'root path' (the default directory at time of invocation) that is prefixed to data\options.data is different between running it off the local file system, and running from HTML. To say for sure, I would need a lot more information on how you are launching it when 'running locally'.
    A major question here is, does the software merely read the data in options.data, or does it actually need to update (i.e. write to) the options.data?

  • Cannot find object after creating dimension and cube.

    I need to develop a project using olap api to get olap data.
    My db release is 10.1.0.2, owb is 10.1.0.4.
    After i create dimension and cube in owb, I cannot find any object i have created in owb. Except that in OEM, after i click the button dimension, there comes an message as that the dimension does not have complete metadata or was created by old release and OEM will create a metadata for it. After that, I can find the dimension in AWM and get the imformation using olap api.
    However, there is no measure button in OEM, I cannot find the measures in measure folder. So that i cannot get the information of the MdmMeasureDimension using olap api.
    Can somebody help me with this issue? Thanks!

    With OWB 10.1 and prior releases to get OLAP metadata for a dimension or cube you must have used the OWB transfer wizard to deploy the OLAP metadata. This bridge basically creates and executes a script with all of the CWM calls to create the OLAP dimension and cube metadata.
    When you deployed the dimension from OWB in 10.1 it only created the 'create dimension DDL' for the object.
    Cheers
    David

  • Can't update master table when creating a materialized view log.

    Hi all,
    I am facing a very strange issue when trying to update a table on which I have created a materialized view log (to enable downstream fast refresh of MV's). The database I am working on is 10.2.0.4. Here is my issue:
    1. I can successfully update (via merge) a dimension table, call it TABLEA, with 100k updates. However when I create a materialized view log on TABLEA the merge statement hangs (I killed the query after leaving it to run for 8 hrs!). TABLEA has 11m records and has a number of indexes (bitmaps and btree) and constraints on it.
    2. I then create a copy of TABLEA, call it TABLEB and re-created all the indexes and constraints that exist on TABLEA. I created a materialzied view log on TABLEB and ran the same update....the merge completed in under 5min!
    The only difference between TABLEA and TABLEB is that the dimension TABLEA is referenced by a number of FACT tables (by FKs on the FACTS) however this surely should not cause a problem. I don't understand why the merge on TABLEA is not completing...even though it works fine on its copy TABLEB? I have tried rebuilding the indexes on TABLEA but this did not work.
    Any help or ideas on this would be most appreciated.
    Kind Regards
    Mitesh
    email: [email protected]

    Thats what I thought, the MVL will only read data that has changed since it was created and wont have the option to load in all the data as though it was made before the table was created.
    From what I have read, the MVL is quicker than a Trigger and I have some free code that prooved to work from a MVL using it as a reference to know what records to update. There is not that much to a MVL, a record ID and type of update, New, Update or Delete.
    I think what I will have to do is work on a the same principle for the MVL but use a Trigger as this way we can do a full reload if required at any point.
    Many thanks for your help.

  • Regarding where to find namespace when create receiver determination

    Hi all :
          Could you please tell me how to find or how to create namespace , as it is needed when create
    receiver determination .  Thank you very much!

    HI Sony,
    Do you mean how to select the Namespace in the Receiver Determination ?
    You have to use the Name space of the Sender Interface in the Receiver Determination. The Namespace should create in Integration Repository after importing the Software Component from the SLD.
    You can get the namespace from the Search help in the Receiver Determination.
    Regards
    Sridhar Goli

  • Cannot find printers when printing pdf files

    I cannot find all the printers installed in the PC when printing pdf files.  I have re-installed the printer driver but it still cannot work.  Please help.

    I cannot access 'properties' for my hp1536dnf mfp.

  • ITunes cannot find songs when iPod or iPhone is plugged into computer

    Every time I plug my iPod or iPhone into my computer, an iTunes box pops up saying, " 'such n such' song could not be copied to the device because they could not be found." There will be a little arrow saying '100 total problems'. Actually it is referring to all songs/videos/whatever in the device. When I look in the library it is there with the exclamation point. The song plays when selected, so it is not gone. It only seems to disappear when I attach a device to my computer and iTunes comes up. I thought I fixed it when I restored my iPhone. After I reattached the phone with the newly added songs, the error message showed again.
    It's not as bad as it sounds as the items are still there. The songs are still on my iPod too. When I remove the device and restart iTunes, it acts as though nothing is wrong until I again attach any idevice. It can be a real headache when I want to recharge and play random songs that is cannot find or add those songs to another .
    I do have all my songs on a network attached storage device with a RAID 5 system.
    Anybody else have similar porblems?
    Chup

    You've posted to the iTunes Match forum, which your question does not seem related to. You'll get better support help by posting to the iTunes for Windows forum: https://discussions.apple.com/community/itunes/itunes_for_windows

Maybe you are looking for