Jdeveloper 9i check updates problem
Hi,
I wanted to update my Jdeveloper 9i with OA extension to have Junit.
So I went to Help > Check for updates > and the rest of the wizard.
The below is what I get:
"An error occurred while getting updates from OTN. This may be due to a network
problem, proxy settings or the update center may be temporarily unavailable.
Details: Attribute value should start with quote."
I have setup the proxy information in the webbrowser/proxy in the tools ->preferences menu. And the same setup is able to go to OTN in JDeveloper10g.
Any ideas what is wrong?
Thank you very much!
Regards,
Arun
Download the Junit extension from the extension exchange:
http://www.oracle.com/technology/products/jdev/htdocs/partners/addins/exchange/1012index.html
for 10.1.2/9.0.5 and there is a link there for older versions.
For OA Framework you need to get a specific patch from Oracle Support - you can't use check for update for this.
Similar Messages
-
I have an Apple MacBook on which Lion 10.7, plus all updates, are successfully installed.
Can you tell me if TechTool Deluxe, normally supplied with Apple here has been now tested and found to run successfully?
I have run the program to check a problem that I'm having. The particularly with video, and also volume structure. TEchTool Delux reports a failure for both of these components.
I am wondering if this is realistic or not, given the start-up screen for TechTool Delux mentions on start-up that it has yet to be tested fully with Lion?
With thanks, Ron.Yes, I understand, however, he Macbook is out of its Applecare, but the TechTool it still on the machine. Does that entitle me to an upgrade in TechTool?
I suspect not, hoever, seeing I am running Lion, I am not sure at all? If you can answer this question it will help as then Imight be able to solve the problem I'm having.
Best regards, Ron -
unable to check updates and couldnt download or install any application
Hi, mayca07.
Thank you for visiting Apple Support Communities.
I would need more information regarding the exact issue or errors received to provide a better answer. However, there are a couple things that I would recommend trying. Try forcing all open applications to close and restart the device. Next, go through the section labeled Troubleshoot issues on an iPhone, iPad, or iPod touch in the second article below.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Cheers,
Jason H. -
I unable to dowload apps check update. Can't use my 10.00 gift card that is on my account do to some iTunes purchased can I just used the gift card. That Is on my account
yea just went through the process and it charged my card and not my credit
-
hi
i have a problem
My client needs a front end application for the database application. they are using MS Access as there database. the problem is in the the table headers have namespaces so as
table name :Training
field name : date of joining
field name :Trainers name
and so on.........
I am facing problem updating the table as it gives "invalitd update statement"
The problem as far as i could see is the name spaces
How do i check the problem
I could not find the solution any were else so please help
thank you
vinay1.Recheck the syntax -
It should be :
UPDATE Table_name SET column1=value1,col2=val2
WHERE ...
2.If u r sure about the SQL statement,
try to create a dummy table whose columns don't have any spaces(U can use underscores)
Run the program to ascertain your assumption. -
Adobe air 2.6 auto update problem..
hi friends,
i am writing a multitouch application for like kiosk machine..
and i want to add auto update functionally,
i write this codes, but i am getting There was an error downloading the update. Error# 16824 error after downloading update...
update_2_6.xml :
<?xml version="1.0" encoding="utf-8"?>
<update xmlns="http://ns.adobe.com/air/framework/update/description/2.5">
<versionNumber>0.0.4</versionNumber>
<url>http://www.abc.com/updates/RixossIBoard_v004.air.zip</url>
<description>This is an AIR2.6 release of my application</description>
</update>
update_config.xml :
<?xml version="1.0" encoding="utf-8"?>
<configuration xmlns="http://ns.adobe.com/air/framework/update/configuration/1.0">
<url>http://www.abc.com/updates/update_2_6.xml</url>
<delay>0</delay>
<defaultUI>
<dialog name="checkForUpdate" visible="false" />
<dialog name="downloadUpdate" visible="true" />
<dialog name="downloadProgress" visible="true" />
<dialog name="installUpdate" visible="true" />
</defaultUI>
</configuration>
in flash code:
var updater:ApplicationUpdaterUI = new ApplicationUpdaterUI();
updater.configurationFile = new File("app:/update_config.xml");
updater.addEventListener(UpdateEvent.INITIALIZED, updaterInitialized);
updater.addEventListener(ErrorEvent.ERROR, hatavarupdate);
//updater.addEventListener(ErrorEvent.ERROR.hatavarupdate);
updater.initialize();
function hatavarupdate(evt:ErrorEvent):void
//trace (evt.type);
function updaterInitialized(e:UpdateEvent):void{
updater.checkNow();
what is problem?
it check update ok, download update ok, but after download update i get the There was an error downloading the update. Error# 16824
Thanks for relation,
ErcanWhy don't you post some of the relevant lines for your application?
Makes hard to guess what the issue is otherwise.
The first line of your matching app file (<appname>-app.mxml) must have the same matching air sdk version as in...
<application xmlns="http://ns.adobe.com/air/application/2.6">
The version number if that same file must match the versionNumber in your update file, as in
<versionNumber>0.0.4</versionNumber>
Compile it and distribute it to the url specified in your update xml file
http://www.abc.com/updates/RixossIBoard_v004.air.zip
Manually check your app:/update_config.xml - make sure it is what you think it is
Don -
Local repository on Oracle VM Manager, then yum check-update itself
Hi.
I have one Oracle VM Manager server as Oracle Linux 6.2 x86_64 that ULN registerd.
To update my Oracle VM Servers I set up local yum repository on my Oracle VM Manager, and it works OK with my Oracle VM Server Upgrade.
(Here is nice documents: http://itnewscast.com/oracle-vm-patch-updates )
However when I run "yum check-update" to keep secure OL6 itslef on my Oracle VM Manager, it shows update for el5 (not el6) as below;
ethtool.x86_64 2:2.6.33-0.3.100.1.el5 ovm3_x86_64_latest
kernel-uek.x86_64 2.6.39-200.1.1.el5uek ovm3_x86_64_latest
kernel-uek-firmware.noarch 2.6.39-200.1.1.el5uek ovm3_x86_64_latest
pciutils.x86_64 3.1.7-5.el5 ovm3_x86_64_latest
python-urlgrabber.noarch 3.9.1-9.100.1.el5 ovm3_x86_64_latest
unzip.x86_64 6.0-3.100.1.el5 ovm3_x86_64_latest
I can run as 'yum --disablerepo="ovm3_x86_64_latest" check-update' to ignore above updates, but is there any way more smart?I installed this patch to see if it would fix the problem I'm having, which is:
After a fresh install of 3.1.1 on two servers and the manager, everything worked fine until I rebooted the servers the first time. Then they came up in the "starting" state, and stay there. The error messages from the discovery process say something like "com.oracle.ovm.mgr.api.exception.IllegalOperationException: If the IP address of this server has changed, please delete the server: toravm2.acbl.net, and re-discover."
The servers have certainly not changed any hardware or IP addresses. They were just installed!
Anyhow, the installation of Build 365 and reboot of the servers fixed ONE of them. But the other one is still stuck in the "starting" state, and is UNUSABLE.
Any idea what the discovery process might be seeing that would cause this? -
Dear All,
We have update problems in our Quality systems, and also in every R/3 system that we create from a Production system copy.
Sometime the UPD and UP2 work processes hung without apparent reason.
In the SM50 I can see one or more of my update processes running for a lot of time (many hours) on the table VBDATA without perform any action.
In the tcode SM12 I donu2019t see any kind of lock, and I donu2019t understand why only sometime this problem happens.
Of course, from the SM13 I can see that during this problem the system is not able to perform any kind of update.
As I told in the beginning of the message, I have the same problem in other two R/3 systems, both created with a system copy from the production system.
The Production and the Developer systems seem not affected by this problem.
Have you got any idea about the reason of the problem?
Even if the Production systems is not directly affected, all the IT department is not able to work on the Quality system (or any other Test system), and the only workaround is to kill the UPD (or UP2) WPs affected.
Thanks in advance,
Federico Biavati
My R/3 System is a 4.7 on SLES9 and Oracle 10.2.0.2Hello Siva,
This is what I did:
> Check how many entries do you have in VBDATA currently.
More than 1.000 in every SAP systems that Iu2019m creating from Production
> You might want to run the reorganize updates program to clear the old updates
> that are pending/in error
Good point!!
After the reorganization (ST14 u2013 Reorganize update requests) the table VBDATA is empty.
Iu2019ll check and Iu2019ll let you know if the problem is definitively solved.
Thanks for you help,
Federico -
Installation Problems, Permissions Problems, SW Update Problems, Solved
I'm posting here to relate some problems I've had and how I ultimately solved them, in the hope that it might help somebody.
The following relates to OS 10.5.4 on an imac PPC 1.8.
It started (at least the first symptom I noticed was) with Super Duper not working to auto-clone my drive, because the first thing SD does before running a clone job is to repair permissions on the subject drive. The repair permissions task failed with "the underlying task failed" error.
So I tried the manually repair permissions from Disk Utility and got the same "the underlying task failed" error. It's a bit alarming not to be able to repair permissions. I tried a reboot, no change. This persisted for at least a week as I didn't have time to aggressively go after it.
Then I purchased DiskWarrior (again - owned it years ago in Sys 9 days), as in my experience that was the "if all else fails" fix for everything directory-related. I booted from another blessed drive (do people still say that anymore? lol, showing my age) and ran DW on the drive in question. Sure enough DW found and fixed about 150 problems. Great I think, reboot from the original drive, run Disk Utility, repair permissions...nope! Same error. What now? I checked the console installer log for more and all the errors looked like "failure to write" permission type errors. Grr.
Verify Disk ran OK. I checked the SMART status and it was OK, as I was by now worrying about the physical drive.
Then along comes the 10.5.5 incremental update in Software Update and I get the following error: "The Installer could not install some files in "/" check permissions". Doh! Same thing with the Java update. Since I can't repair permissions I'm stuck.
So now I have only one course of action (well maybe there were others, but this is what I did) which was to do an Archive and Install. My OS X DVD is 10.5.0 so that is what I got of course when I reinstalled.
Running Disk Utility after the A&I allowed me to repair permissions successfully. Some progress. But now I had a slew of updates to get back to the present version of everything. Most installed successfully, except the 10.5.5 combo update. For that I got "package contents could not be validated". Rats.
So I decided (after reading here about SW update problems especially with combos) to manually download the 10.5.5 combo. For some reason running SW Update under 10.5.0 gave me download rates of 32kb/s, where I am used to 1.1MB/s. Projected download time 3 hrs....no way! So I booted back to my 10.5.4 clone and downloaded the 612MB at normal speed there. I downloaded the 10.5.1 incremental as well just in case.
Finally I was able to run the 10.5.5 combo (manually downloaded) successfully. Check Disk Utility and repair permissions...all good. Run SW Update and get the Java update, all good.
Deep breath. Phew.
So there you have it. I was able to fix it all. I probably didn't need to buy DW (but it's so great I'm ok with that) as I conclude now that the A&I ultimately was the real fix. It was a very frustrating experience though, especially with SW update giving me a bad download.
I'm hoping that this post might now show up in searches and help somebody out there.
Cheers
GWonderWoofy wrote:
I don't think you have either of those kernels... as they don't exist. I assume you meant that you are using 3.10.5 and supposedly have 3.10.6 installed. You issue is a bit of a catch 22, as you are unable to mount the ESP (no vfat module matching your running kernel), yet mounting the ESP would be required in order to properly udpate. I imagine that you actually have the correct kernel as /boot/vmlinuz-linux. But whatever mechanism you use to copy it from that location to the ESP didn't work.
You are going to have to boot from live media, and fix this from a chroot. Please search around for how to do this, as this information is all over the place.
Looks like I'm in for a treat. I chroot-ed, did a full upgrade in case there was an even newer kernel (and there was, 3.10.7). After the upgrade I copied /boot/vmlinuz-linux, /boot/initramfs-linux.img and /boot/initramfs-linux-fallback.img to /boot/efi/EFI/arch/ renaming the files vmlinuz-arch.efi, initramfs-arch.img, initramfs-arch-fallback.img respectively. I unmounted everything and rebooted. Now reFINd freezes as soon as it tries to boot Arch. -
Demonstrating lost update problem
Hi
I would like to know if it's possible to demonstrate the 'lost update' problem in oracle without using simulation. If so how would I go about doing this? I assume I will need to establish multiple sessions within a single transaction in order to have independent transactions to demonstrate this properly.
Thanks.The type of behaviour that leads to a lost update can be demonstrated with something like this.
In session 1 run a pl/sql block like:
BEGIN
FOR r IN (SELECT * FROM t ) LOOP
IF r.id = 5 THEN
DBMS_OUTPUT.Put_Line ('ID is '||r.id||' and descr is '||r.descr);
DBMS_LOCK.Sleep(30);
UPDATE t SET descr = 'SLEEPY' WHERE id = r.id;
END IF;
END LOOP;
COMMIT;
END;The Sleep simulates user thinking time, or perhaps some delay in the proce for complex calculations and lookups.
While session 1 is busy, in session 2 do
SQL2> UPDATE t SET descr = 'AWAKE' WHERE id = 5;
1 row updated.
SQL2> COMMIT;
Commit complete.
SQL2> SELECT * FROM t WHERE id = 5;
ID DESCR
5 AWAKEThen, when the block in session 1 is finished, you will see:
ID is 5 and descr is ALL_CATALOG
PL/SQL procedure successfully completed.
Then do
SQL1> SELECT * FROM t WHERE id = 5;
ID DESCR
5 SLEEPYThe update by session2 was lost.
There are two ways to handle the situation. First, define the cursor as FOR UPDATE. In this case, session 2 would receive an error. The other way, optimistic locking, is to use something like the following as an update statement in the pl/sql block:
UPDATE t SET descr = 'SLEEPY'
WHERE id = r.id and
descr = r.descr;Then check for the success of the update.
TTFN
John -
Error code 1200 when checking updates in Reader X (10.1.0)
Suddenly the Adobe Reader tells me I have to have administrator rights to check updates from the help menu. Never happened before.
If I run Reader as an administrator everything is just fine.
Not a big problem (I usually update Reader via Filehippo's Update Checker) but anyway: ???I'm experiencing the same issue on two PCs. Both are Windows 7 Home Premium (x64). Both are running Adobe Reader 10.1.0. Both have all Microsoft updates installed. Both get the error 1200 when trying to update Adobe Reader.
The message in the AdobeARM.log file is the same... "Std User on Vista with UAC off - IsElevated returns 0."
Yet, UAC is actually turned on. The OS is WIndows 7, not Vista. And the user account (on both PCs) is an Administrator account. (It is the default account created when you first unbox the PC and set it up). I even verified it by going to user accounts (through the control panel) and it shows the accounts as administrator accounts.
Prior to Reader 10.1.0, I don't recall ever seeing this error.
I first tried an uninstall, reboot, and re-install Adobe Reader. That didn't help.
I thought maybe it was my antivirus, so I disabled that. No help there either. I even went so far as to uninstall my antivirus (and reboot), but that made no difference, so I re-installed it.
I created a new account that was an administrator as well, logged in with that account, and tried the update. Same error message.
It seems like the updater is not getting the proper UAC/user account info from Windows itself on WIndows 7 Home Premium (x64) PCs.
I have a Vista Home Premium (x64) laptop as well. It has the same antivirus (Avast), same Adobe Reader (10.1.0), and all Microsoft updates installed. UAC is on, and the account is an Administrator account. I don't get this error on the Vista laptop.
Any thoughts?
Thanks,
DF -
*None if your checked updates could be installe
*None if your checked updates could be installed*
+The digital signature for this package is incorrect. The package may have been tampered with or corrupted since being signed by “Apple”.+
I keep getting the above mentioned message, after I have updated my iLife 06 to iLife 08.
And I get a red ! next to each item on the list.
What could be the problem here?Use Disk Utility to Verify the HD & Repair Permissions, then reboot, reapply the big Combo update for your machine, reboot, repair Permissions, reboot if any are repaired.
PS, if Disk Utility can't verify the disk, you'll have to boot off another drive/partition or Install CD/DVD to actually repair it.
The combo update for Intel-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateintel.html
Repair Permissions after re-install, then reboot again. -
Firefox 24 keeps checking updates for addons even though i continually reset uppdate manually
I repeatedly reset addons to update manually but firefox continually keeps checkignfor updates, all my addons are up to date and current.
This will happen every 15 minutes or so when i start up firefox once more.
never happened before.You can check for problems with preferences.
Rename or delete the prefs.js file and possible numbered prefs-##.js files and a possible user.js file to reset all prefs to the default value.
*http://kb.mozillazine.org/Preferences_not_saved
It is possible that there is a problem with the file(s) that store the extensions registry.
Delete the extensions.* files (e.g. extensions.sqlite, extensions.ini) and compatibility.ini in the Firefox profile folder to reset the extensions registry.
*https://support.mozilla.org/kb/Profiles
New files will be created when required.
See "Corrupt extension files":
*http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
*https://support.mozilla.org/kb/Unable+to+install+add-ons
If you see disabled or not compatible extensions in "Firefox/Tools > Add-ons > Extensions" then click the Tools button at the left end side of the Search Bar to check if there is a compatibility update available.
If this hasn't helped then also delete the addons.sqlite file. -
Zen 8G This device cannot start code 10 and firmware update problem
I have read the threads in the forums on the same problem that I am having. It seems that there are few solutions for this and the ones that have been posted I have tried. Basically the problem is this, I made the silly mistake of trying to update the firmware on my Zen 8G since it was listed as a critical update. I downloaded the firmware but it failed and took me to the recovery screen. Instead of working with this, again silly me, I tried to use the Creative recovery tool. This downloaded the firmwary and started rebooting the player. At this point it just hung. I left it on for about 3 hours and nothing happened and it wouldn't turn off so I hit the reset button on the player. Now when I connect it to the computer it recognizes it as a creative zen but if I try to download the firmware the software says the player is not connected when it is. When I check the device driver, even though it shows it as a creative zen it says "This device cannot start code 0"? I have the latest Microsoft device driver loaded and it still doesn't work.
I have tried this on two different computers, one using XP and the other using Vista. I get the same problem with each. It appears to me that the problem is not really with the device driver but somehow with the firmware. However, I am not an expert at this stuff.
If anyone could please help I would appreciate it. This was a gift for my wife for the Christmas of 2007 so it is just out of warranty and the service people won't help.GRe: Zen 8G This device cannot start code 0 and firmware update problem?Hello Tbg99,
Welcome to Creative forums!
Try booting the player in the recovery mode.
. While the ZEN is off, press and hold down the play/pause button.
2. While holding down the play/push button, push the reset button slowly using a paper clip/pin. You should feel the "click" sound when press it.
3. Slide the On/Off switch towards the power button and hold it down until the recovery boot screen appears.
Choose Clean Up then Reboot. If problem still persists, you may need to format the ZEN but take note that formatting will delete the contents of the device. To format the ZEN, boot the ZEN in the recovery mode again and choose Format this time. -
Hey
I hale problem with my new xperia z1. I bought this Phone yesterday and i have not got an update to android L. Is someone who can help me?? I checked update opction with PC companion
Solved!
Go to Solution.@Jaro105
The answer to your question is on this post
http://talk.sonymobile.com/t5/Software-Updates/Android-5-0-When-are-we-getting-Lollipop-Which-Xperia...
*Software rollouts are a phased process – timings & availability will vary by market/operator. Most models supported but some operator/market exceptions will apply
please post there.
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)
Maybe you are looking for
-
I have de- and installed everything again. All other programs like Photoshop, native HP scanning software do work normally. Only Acrobat can't connect to the device. What should I do? Evgeny
-
I asked a question to a WebLogic salesrepresentative, how to avoid stale data when the db is shared, without doing ejbLoad() for each transaction. He told me that if two WebLogic Servers, in a cluster setup, access the same databa
-
Sync custom ringtone info to OSX contacts
I notice whenever I have an issue with my iPhone and it needs a reset, I have to manually enter in my saved ringtones and text tones that I assign to each person. I am wondering why doesn't OSX contacts save this information?
-
-
Trouble update itune and Quictime
Can anyone help me with this issue: Tried update itune and Quicktime, but keep getting the following errors: -C:\program File\Quicktime\QTsystem\QT Java.dll (file not found) -Error code: -3 When attempting open iTunes get the following error: Quickti