JDeveloper Installation and sevlet deployment
I need some guidance as to how to install JDeveloper3.0 on a machine which already has a webserver (NES 4.0) installed on it. Currently I have installed it in default fashion, but it just won't let me run a servlet from JDeveloper Environment. If installation is not a problem then please could I have some other workaround to this problem.
Nikhil,
Is this a port conflict between the built-in webserver and your external webserver?
Can you run the servlet in JDev after you shutdown your webserver?
FYI: You can configure some properties(like Port #) of the built-in webtogo server by modifying <JDev>\lib\webtogo.ora
Regards,
Arun
Similar Messages
-
Oracle Enterprise Manager Agent deployment (Installation and Configuration) Error
Hello,
I am trying to create an agent on a linux server using Oracle Enterprise Manager 12.1.0.3. The user is created with root privilege on the server, by change /etc/sudoers entry username the same as the root entry. After that I tried to add host target by clicking Setup->Add Target->Add target Manually->Add Host Targets in the Oracle Enterprise Manager.
In the Add Target view: I clicked on add, then I entry host and platform information. After that I click next. Then I provided the Linux x86-64 : Installation Details for
Installation Base Directory, Instance Directory, Name Credential ... then click next. then click Deploy Agent.
In the Add Host Status view: stages Initialization and Remote Prerequisite Check successfully passed, but in the stage Agent Deployment, it failed in the Installation and Configuration phrase of the Agent Deployment stage.
The log content is shown below. There are numerous SEVERE Errors. But I don't have much experience in dealing with these type of problems. I thank you in advance for all the helps.
lf
WARNING: Validation of XML schema is disabled because AggregateDescriptions.xsd could not be found
INFO: Creating new CFM connection
INFO: Creating a new logger for oracle.sysman.top.agent
INFO: Unmarshalling /users/ncgf/em_agent/core/12.1.0.3.0/inventory/ContentsXML/ConfigXML/oracle.sysman.top.agent.12_1_0_3_0.xml
INFO: Creating a new logger for OuiConfigVariables
INFO: Unmarshalling /users/ncgf/em_agent/core/12.1.0.3.0/inventory/ContentsXML/ConfigXML/OuiConfigVariables.1_0_0_0_0.xml
INFO: Aggregate Description oracle.sysman.top.agent:12.1.0.3.0:common successfully loaded
INFO: Aggregate Description OuiConfigVariables:1.0.0.0.0:common successfully loaded
INFO: Successfully returning from CfmFactory.connect()
INFO: Cfm.save() was called
INFO: Cfm.save(): 2 aggregate instances saved
INFO: oracle.sysman.top.agent:IAction.perform() was called on {Action state:configuration in CfmAggregateInstance: oracle.sysman.top.agent:12.1.0.3.0:common:family=CFM:oh=/users/ncgf/em_agent/core/12.1.0.3.0:label=1}
INFO: Framework waiting for Action to complete at 15:08:10.272
INFO: CfwProgressMonitor:actionProgress:About to perform Action=configuration Status=is running with ActionStep=0 stepIndex=0 microStep=0
WARNING: Skipping environment variable line: "}": oracle.sysman.emCfg.common.CfwException: A non-empty environment line must contain "=": }
WARNING: Failed to read environment variable file /users/ncgf/em_agent/core/12.1.0.3.0/install/envVars.properties: java.io.FileNotFoundException: /users/ncgf/em_agent/core/12.1.0.3.0/install/envVars.properties (No such file or directory)
INFO: oracle.sysman.top.agent:About to execute plug-in Agent Configuration Assistant
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant is running
INFO: oracle.sysman.top.agent:Internal PlugIn Class: oracle.sysman.agent.config.AgentConfiguration
INFO: oracle.sysman.top.agent:Classpath = /users/ncgf/em_agent/core/12.1.0.3.0/oui/jlib/srvm.jar:/users/ncgf/em_agent/core/12.1.0.3.0/jlib/agentConfig.jar:/users/ncgf/em_agent/core/12.1.0.3.0/jlib/emConfigInstall.jar:/users/ncgf/em_agent/core/12.1.0.3.0/sysman/jlib/emagentSDK.jar:/users/ncgf/em_agent/core/12.1.0.3.0/modules/oracle.http_client_11.1.1.jar:/users/ncgf/em_agent/core/12.1.0.3.0/sysman/jlib/log4j-core.jar
INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration has been started
INFO: oracle.sysman.top.agent:Parametes passed to agent configuration are:
1.ORACLE_HOME=/users/ncgf/em_agent/core/12.1.0.3.0
2.AGENT_PORT=3872
3.ORACLE_HOSTNAME=nsn175-89.us.oracle.com
4.b_doDiscovery=false
5.AGENT_BASE_DIR=/users/ncgf/em_agent
6.AGENT_INSTANCE_HOME=/users/ncgf/em_agent/agent_inst
7.s_hostname=nsn175-89.us.oracle.com
8.OMS_HOST=nsn175-105.us.oracle.com
9.b_startAgent=false
10.b_secureAgent=true
11.b_chainedInstall=false
12.b_forceConfigure=false
13.EM_UPLOAD_PORT=4904
14.b_forceAgentDefaultPort=false
15.s_staticPorts=
16.PROPERTIES_FILE=
b_skipValidation=false
INFO: oracle.sysman.top.agent:Validating OMS_HOST and EM_UPLOAD_PORT
INFO: oracle.sysman.top.agent:Validating with http protocol ...
INFO: oracle.sysman.top.agent:URL framed is:http://nsn175-105.us.oracle.com:4904/empbs/genwallet
SEVERE: oracle.sysman.top.agent:Connection refusedUnexpected end of file from server
INFO: oracle.sysman.top.agent:Validating with https protocol ...
INFO: oracle.sysman.top.agent:URL framed is:https://nsn175-105.us.oracle.com:4904/empbs/genwallet
SEVERE: oracle.sysman.top.agent:The EM_UPLOAD_PORT passed is a secure port. Hence AGENT_REGISTRATION_PASSWORD or s_encrSecurePwd should be passed
INFO: oracle.sysman.top.agent:EM Protocol Switch determined: https
INFO: oracle.sysman.top.agent:Performing free port detection..
INFO: oracle.sysman.top.agent:Trying for host : nsn175-89/10.134.175.89 and port : 3872
INFO: oracle.sysman.top.agent: Trying for host : /127.0.0.1 and port : 3872
INFO: oracle.sysman.top.agent:** Agent Port Check completed successfully.**
INFO: oracle.sysman.top.agent:Agent Port from User Passed Port3872
INFO: oracle.sysman.top.agent:Paths after canonical format conversions are :
1. state_dir=/users/ncgf/em_agent/agent_inst
2. agentBaseDir=/users/ncgf/em_agent
3. oraHome=/users/ncgf/em_agent/core/12.1.0.3.0
INFO: oracle.sysman.top.agent:Parent directory of agent instance home:/users/ncgf/em_agent
INFO: oracle.sysman.top.agent:AgentConfiguration:perform:AgentPortHandler for /users/ncgf/em_agent/core/12.1.0.3.0 and hosts=nsn175-89.us.oracle.com returned Port to Use=3872
INFO: oracle.sysman.top.agent:Instantiating emctl.template file #DEFAULT_EMSTATE# with /users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent:Writing the following contents into /users/ncgf/em_agent/core/12.1.0.3.0/install/oragchomelist
INFO: oracle.sysman.top.agent:/users/ncgf/em_agent/core/12.1.0.3.0:/users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent:Both /etc/oragchomelist and /var/opt/oracle/oragchomelist does not exist.
INFO: oracle.sysman.top.agent:Executing emctl deploy agent command...
INFO: oracle.sysman.top.agent:AgentConfiguration: Executing emctl deploy agent command...
INFO: oracle.sysman.top.agent:Executing the command: /users/ncgf/em_agent/core/12.1.0.3.0/bin/emctl deploy agent -L -o nsn175-105.us.oracle.com:4904 -N /users/ncgf/em_agent/agent_inst nsn175-89.us.oracle.com:3872 nsn175-89.us.oracle.com
INFO: oracle.sysman.top.agent:Creating shared install...
INFO: oracle.sysman.top.agent:Source location: /users/ncgf/em_agent/core/12.1.0.3.0
INFO: oracle.sysman.top.agent:Destination (shared install) : /users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent:Secure Mode: No
INFO: oracle.sysman.top.agent:DeployMode : agent
INFO: oracle.sysman.top.agent:
INFO: oracle.sysman.top.agent:Creating directories...
INFO: oracle.sysman.top.agent:Creating private.properties...
INFO: oracle.sysman.top.agent:Creating blackouts.xml...
INFO: oracle.sysman.top.agent:Creating targets.xml...
INFO: oracle.sysman.top.agent:Creating emctl control program...
INFO: oracle.sysman.top.agent:Creating emtgtctl control program...
INFO: oracle.sysman.top.agent:Agent will not be secured.
INFO: oracle.sysman.top.agent:Secure REPOSITORY_URL found. New agent should be configured for secure mode
INFO: oracle.sysman.top.agent:Secure emdWalletSrcUrl found. New agent should be configured for secure mode
INFO: oracle.sysman.top.agent:Oracle Enterprise Manager Cloud Control 12c Release 3
INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
INFO: oracle.sysman.top.agent:Property 'agentTZRegion' is missing from /users/ncgf/em_agent/agent_inst/sysman/config/emd.properties. Updating it...
INFO: oracle.sysman.top.agent:An agentTZregion of 'US/Pacific' is installed in /users/ncgf/em_agent/agent_inst/sysman/config/emd.properties.
INFO: oracle.sysman.top.agent:The command: /users/ncgf/em_agent/core/12.1.0.3.0/bin/emctl deploy agent -L -o nsn175-105.us.oracle.com:4904 -N /users/ncgf/em_agent/agent_inst nsn175-89.us.oracle.com:3872 nsn175-89.us.oracle.com completed with status=0
SEVERE: oracle.sysman.top.agent:Securing of agent step will be skipped because of the following reasons:
1. Agent Registration Password was not passed.
2. b_secureAgent was passed as false
3. The flag -forceConfigure was assed from agentDeploy.sh
INFO: oracle.sysman.top.agent:Plugin File:/users/ncgf/em_agent/plugins.txt
INFO: oracle.sysman.top.agent:Plugin Homes found.
INFO: oracle.sysman.top.agent:Executing command :/users/ncgf/em_agent/core/12.1.0.3.0/perl/bin/perl /users/ncgf/em_agent/core/12.1.0.3.0/bin/AgentPluginDeploy.pl -oracleHome /users/ncgf/em_agent/core/12.1.0.3.0 -agentDir /users/ncgf/em_agent -pluginIdsInfoFile /users/ncgf/em_agent/plugins.txt -action configure -emStateDir /users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent:
INFO: oracle.sysman.top.agent:
INFO: oracle.sysman.top.agent:The Agent emStateDir location passed is /users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent: The log file is /users/ncgf/em_agent/agent_inst/install/logs/agentplugindeploy_2013_10_16_15_08_11.log
INFO: oracle.sysman.top.agent: The temp file created to check R/W permissions in Oraclehome: /users/ncgf/em_agent/core/12.1.0.3.0 is /users/ncgf/em_agent/core/12.1.0.3.0/rwFile
INFO: oracle.sysman.top.agent:Plugin command completed with status=0
INFO: oracle.sysman.top.agent:Executing command :/users/ncgf/em_agent/agent_inst/bin/emctl listplugins agent -type all
INFO: oracle.sysman.top.agent:Oracle Enterprise Manager Cloud Control 12c Release 3
INFO: oracle.sysman.top.agent:Oracle Enterprise Manager Cloud Control 12c Release 3
INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
INFO: oracle.sysman.top.agent:---------------------------------------------------------------
INFO: oracle.sysman.top.agent:---------------------------------------------------------------
SEVERE: oracle.sysman.top.agent:ERROR: The Management Agent configuration failed. The plug-in configuration for the oracle.sysman.oh monitoring plug-in may have failed, or this plug-in may not be present in the Management Agent software. Ensure that the Management Agent software has the oracle.sysman.oh monitoring plug-in, if not then retry the operation. If the agent software has the oracle.sysman.oh monitoring plug-in, view the plug-in deployment log /users/ncgf/em_agent/agent_inst/install/logs to check if the plug-in configuration for the oracle.sysman.oh monitoring plug-in failed.
SEVERE: oracle.sysman.top.agent:Agent configuration has failed
INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration finished with status = false
INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration finished with status = false
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant has failed its perform method
INFO: Cfm.save() was called
INFO: Cfm.save(): 2 aggregate instances saved
INFO: done waiting for Action from 15:08:10.272
Thank you for your help AkankshaSheoranKaler. I have executed the following command based on your request. If there is any issue, please let me know. Thanks!
"Can you run this command to make sure that the agents bits were downloaded correctly : oms home /bin /emcli verify_updates
Share the output of the command. I am suspecting this is a know issue (Bug 17300008) but i will wait for your output. Also if you can open an SR with oracle support to track this issue and its resolution. "
[ncgf@nsn175-105 bin]$ ./emcli setup -url=https://nsn175-105.us.oracle.com:7803/em -u sername=SYSMAN
Oracle Enterprise Manager 12c 3.
Copyright (c) 1996, 2013 Oracle Corporation and/or its affiliates. All rights reserve d.
The configuration directory "/users/ncgf" may not be local. See the "dir" option in t he help for the setup command.
Do you want to continue using this directory? [yes/no] yes
Enter password
Emcli setup successful
[ncgf@nsn175-105 bin]$ ./emcli verify_updates
Verifying updates. Starting validation...
Type : Plug-in
Description: Demo Hostsample Test Plugin
Attributes
Version: 1201000100
Revision: 0
OS Platform: Generic Platform
Plug-in Name: Demo Host Sample Plugin
Archives are missing from the Software Library. Unable to determine the URL for downloading the update. The update might not have come from Oracle Enterprise Manager Store.
For each update with missing archives, emcli import_update can be used with a -force option to re-upload the archives to the Software Library.Hello AkankshaSheoranKaler
We have done the following, but we aren't able to resolve this issue. Thank you for your help!
lf
“This happen if the software library is not accessible, readable or unmounted (if it is in shared file system).”
On Enterprise Manager server [nsn175-105], we did the following:
1. we modified /etc/exports to include this line: /export *(rw,no_root_squash,sync)
we start nfs service by executing command “service nfs start”.
On Management Agent server (nsn175-89), we verified that we are able to mount /export directory of EM server.
On Management Agent server, we started firefox browser and were able to run successfully https://nsn175-105.us.oracle.com:4904/empbs/genwallet
After making this change, we ran agent deployment again. We encountered the same error as shown above.
“You can fix the software library or you can download the agent bits in offline mode.”
For fixing the software library, select Setup->Provision and Patching->Offline Patching, then select Offline Patching radio button, download: https://updates.oracle.com/download/em_catalog.zip. Next upload this zip file.
“Try downloading the bits again”
We are not sure what agent bits are. Would you please explain this and provide procedure how we can download this?
(Here I have attempted to fix the software library, but I am new to Enterprise Manager and not sure how to interpret this). -
Java API's supported in the Jdeveloper, IAS, and RDBMS product components
If there are any technical errors or "mistatement of the facts" in this posting, please let me know about them ..
This article is being delivered in Draft form and may contain
errors. Please use the MetaLink "Feedback" button to advise
Oracle of any issues related to this article.
PURPOSE
This article describes the "Enterprise Java Beans" (EJB), "Java Server Pages"
(JSP) and servlets Application Programming Interfaces (API) supported by the
Oracle products, Jdeveloper, Internet Application Server (IAS) and the Oracle
RDBMS release 2 and release 3, also known as Version 8.1.6 and 8.1.7,
respectively.
SCOPE & APPLICATION
All parties interested in the Java API's supported by these products.
Java API's supported in the Jdeveloper, IAS, and RDBMS product components
JDEVELOPER
JDEVELOPER is Oracle's Java development tool designed for coding / development,
testing / debugging, and deployment of Java Applications to the IAS and
RDBMS platforms.
With the java software api's being in a constant state of evolution, each new
release of Jdeveloper adds support for the "then current" version of the java
software api's, if it does not already have it implemented.
JDEVELOPER SERVLET API JSP API EJB API
VERSION VERSION VERSION VERSION
3.2.X.X 2.2 1.1 1.1
3.1.X.X 2.1 1.0 1.0
NOTE :
Sun Microsystems and their advisory teams (Oracle is on it) is working on
"draft" specifications for the next version of all of these API's
EJB -------> http://java.sun.com/products/ejb/index.html
JSP -------> http://java.sun.com/products/jsp/index.html
Servlets --> http://java.sun.com/products/servlet/?frontpage-javaplatform
It is anticipated that future releases of Jdeveloper will continue to be
upgraded to include support for the next version of each api.
To obtain the latest information on Oracle's Internet Development Suite (IDS)
of tools, please review the "Internet Developer Suite" information located
on Oracle's technet web site at :
http://technet.oracle.com/products/index.htm
IAS
IAS is Oracle's next evolution of the web server and application server
product technology superceeding the Web Application Server (WAS) and Oracle
Application Server (OAS) product lines.
IAS SERVLET API JSP API EJB API EJE VERSION
VERSION VERSION VERSION VERSION SUPPORTED
9I(1.0.2) 2.2 1.1 1.1 817
8i(1.0.1-NT) 2.0 1.0 1.0 816
8i(1.0.0-UNIX) 2.0 1.0 1.0 816
The IAS product contains two Java Virtual Machines (JVM) within it's
architecture.
They are called :
1) APACHE JSERV servlet engine
2) ORACLE ENTERPRISE JAVA ENGINE (EJE)
APACHE JSERV servlet engine
The APACHE JSERV servlet engine is an EXISTING product licensed from the
apache group which supports the servlet api 2.0.ONLY.
The APACHE JSERV product does not support ANY JSP's unless the customer
installs a third party jsp engine.
The IAS 8i/9i which has the APACHE JSERV product embedded in it, comes with
Oracle's JSP engine (OJSP) already integrated into it. OJSP supports JSP's up
to the specific JSP engine version documented in the Oracle Universal
Installer (OUI) for the 8.1.7 RDBMS or the IAS products. It is also documented
in the product's release notes.
Oracle ENTERPRISE JAVA ENGINE (EJE)
The EJE formerly known as :
1) Oracle 8i Java Virtual Machine (JVM)
2) JSERVER component,
3) Aurora JVM
was originally releas ed in the RDBMS 8.1.5 database with jdk 1.1.6 based java
support.
The currently supported versions of the Oracle 8i RDBMS, versions 2 and 3,
also known as Version 8.1.6 and 8.1.7, respectively, provides a jdk 1.2.1
based java virtual machine support.
"EJE" Version 816
This EJE, found in rdbms 8.1.6 and IAS 8i, contains support for the ejb
api 1.0, corba, and java stored procedures.
"EJE" Version 817
This EJE, found in rdbms 8.1.7 and IAS 9i, contains support for the ejb,
corba, and java stored procedures as well as the Oracle Servlet Engine (OSE)
which provides support for the servlets 2.2 api and JSP 1.1 api.
Note :
EJB support in the "EJE" Version 817 has been upgraded to comply with the EJB
1.1 api specification which includes "entity beans" support.
What is the bottom line ??
1) Servlets deployed to the APACHE JSERV must comply with servlet api 2.0.
2) Servlets 2.1 or higher are only supported in EJE's OSE component found in
the rdbms 817 or ias 9i products. Servlets api 2.0 can also run in the OSE.
References
1) "Oracle9i Application Server Technical White Paper" located at :
http://technet.oracle.com/products/ias/pdf/9ias_102.pdf
2) "Whats New? Oracle8i JVM Accelerator, Oracle Servlet Engine, OracleJSP ..."
located at :
http://technet.oracle.com/products/oracle8i/pdf/504.pdf
3) "Oracle8i Release 3 New Features Summary" located at :
http://technet.oracle.com/products/oracle8i/pdf/8iR3_nfs.pdf
nullwhich jvm is used by jserv ?? EJE or a separate jdk ?
The Jserv servlet engine is running in a separate jdk JVM external to the EJE jvm which is embedded within the "database" component of ias and the RDBMS.
See the reference below for more details ...
if jserv only support old apis, why it is in oracle's products ?
i would assume that the oracle servlet engine was under development when ias 8i was released and became available in time for the ias 9i and rdbms 817 products.
looking back in history leads me to believe ias 8i was a migration path to get to ias 9i or rdbms 817.
Based upon the long history of new releases of every oracle product being upgraded with new features, it's reasonable to assume that these products will continue to evolve.
when I deploy a jsp how to deploy in the right servlet container ("EJE") ?
as documented in the reference below, you can deploy JSP's to either the apache jserv jvm or the EJE since the ORACLE JSP engine functionality is in both jvm's.
there are many posts where you can see that people have deploy in jserv and they have problems because they don't use the right container (servlet 2.0 instead of
servlet 2.2) http://technet.oracle.com:89/ubb/Forum2/HTML/006349.html
when ias 8i came out this was clearly an issue since servlet support was at api 2.0, and the current servlet api was probably at 2.1.
oracle clearly made every effort to get ias 9i released quickly to supply a servlet 2.1 and 2.2 capable engine to resolve this issue.
since ias 9i and rdbms 8.1.7 are available this is no longer an issue.
The reference below explains the architecture and understanding it would eliminate a lot of "deploy to the wrong ias 9i component" issues.
so why jserv is bundled with oracle 8i/9ias since EJE support the right api version ?
if in ias 9i release , oracle had removed the jserv component without any advance warning, many customers would have been very upset since oracle makes every attempt to give advance notice before removal of functionality.
References
1) "Oracle9i Application Server Technical White Paper" located at :
http://technet.oracle.com/products/ias/pdf/9ias_102.pdf -
Jdeveloper 11g and Integrated Weblogic Sever 10.3
Hi everyone,
i install jdeveloper 11g and integrated weblogic server 10.3 but when i create a simple ADF web application in ONE simple HELLO WORLD JSF page and i run this page give me this error:
<Feb 24, 2009 6:50:52 PM WET> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1235501448994' for task '0'. Error is: 'weblogic.application.ModuleException: Failed to load webapp: 'APP_TesteWLS-ViewController-context-root''
weblogic.application.ModuleException: Failed to load webapp: 'APP_TesteWLS-ViewController-context-root'
at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:387)
at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
Truncated. see log file for complete stacktrace
java.lang.ClassNotFoundException: javax.faces.webapp.FacesServlet
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:283)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:54)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
Truncated. see log file for complete stacktrace
>
<Feb 24, 2009 6:50:52 PM WET> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'APP_TesteWLS'.>
<Feb 24, 2009 6:50:52 PM WET> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
weblogic.application.ModuleException: Failed to load webapp: 'APP_TesteWLS-ViewController-context-root'
at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:387)
at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
Truncated. see log file for complete stacktrace
java.lang.ClassNotFoundException: javax.faces.webapp.FacesServlet
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:283)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:54)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
Truncated. see log file for complete stacktrace
>
[Deployer:149034]An exception occurred for task [Deployer:149026]deploy application APP_TesteWLS on DefaultServer.: Failed to load webapp: 'APP_TesteWLS-ViewController-context-root'.
weblogic.application.ModuleException: Failed to load webapp: 'APP_TesteWLS-ViewController-context-root'
#### Deployment incomplete. #### Feb 24, 2009 6:50:52 PM
oracle.jdeveloper.deploy.DeployException
at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:247)
at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.deployImpl(Jsr88RemoteDeployer.java:157)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdeveloper.deploy.common.BatchDeployer.deployImpl(BatchDeployer.java:82)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdevimpl.deploy.fwk.DeploymentManagerImpl.deploy(DeploymentManagerImpl.java:436)
at oracle.jdeveloper.deploy.DeploymentManager.deploy(DeploymentManager.java:209)
at oracle.jdevimpl.runner.adrs.AdrsStarter$5$1.run(AdrsStarter.java:1365)
Caused by: oracle.jdeveloper.deploy.DeployException
at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.redeployApplications(Jsr88DeploymentHelper.java:561)
at oracle.jdevimpl.deploy.weblogic.common.Jsr88WeblogicDeploymentHelper.redeployApplications(Jsr88WeblogicDeploymentHelper.java:259)
at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:222)
... 11 more
Caused by: oracle.jdeveloper.deploy.DeployException: Deployment Failed
at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.redeployApplications(Jsr88DeploymentHelper.java:542)
... 13 more
#### Cannot run application APP_TesteWLS due to error deploying to DefaultServer.
[Application APP_TesteWLS stopped and undeployed from Server Instance DefaultServer]
i read the Oracle JDeveloper 11g Installation Guide and in "11 Using WebLogic Server with Oracle JDeveloper"
"Installing Oracle JDeveloper Studio 11g Release 1 (11.1.1) also automatically installs Oracle WebLogic Server 10g Release 3 (10.3). Oracle JDeveloper uses this preconfigured installation as the Integrated WLS, a Oracle JDeveloper-managed server for testing and debugging your applications from within the IDE. *After installing Oracle JDeveloper, everything you need to begin developing, testing and debugging web applications is installed and configured for you; no additional configuration steps are necessary for development purposes.*"
my environment is:
OS -> fedora 10
Ram -> 4gb
i need help .... thanks ...
best regards
Edited by: Vale Teixeira Miguel on Feb 24, 2009 6:55 PMhi Olaf, thanks for your help
yes i do the same
i confirmed all steps and i do correct ...
i change the JDK 1.6.0_11 to JDK 1.6.0_12
i change the JDK settings in $JDEV_HOME/wlsserver_10.3/.product.properties to JDK 1.6.0_12
i change the JDK settings in $JDEV_HOME/bin/jdev.conf to JDK 1.6.0_12
when i run the application give me this error
<Feb 25, 2009 5:09:42 PM WET> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'Web_Teste1'.
weblogic.application.ModuleException:
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1373)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:468)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
Truncated. see log file for complete stacktrace
java.lang.UnsatisfiedLinkError: /opt/app/oracle/jdev/jdk160_05/jre/lib/i386/xawt/libmawt.so: libXext.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1751)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1647)
at java.lang.Runtime.load0(Runtime.java:770)
at java.lang.System.load(System.java:1005)
Truncated. see log file for complete stacktrace
Feb 25, 2009 5:09:42 PM oracle.adf.share.config.ADFConfigFactory cleanUpApplicationState
INFO: Cleaning up application state
<Feb 25, 2009 5:09:42 PM WET> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Feb 25, 2009 5:09:42 PM WET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Feb 25, 2009 5:09:42 PM WET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Feb 25, 2009 5:09:42 PM WET> <Warning> <Server> <BEA-002611> <Hostname "prtt01", maps to multiple IP addresses: 192.168.75.84, 127.0.0.1>
<Feb 25, 2009 5:09:42 PM WET> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<Feb 25, 2009 5:09:42 PM WET> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 192.168.75.84:7101 for protocols iiop, t3, ldap, snmp, http.>
<Feb 25, 2009 5:09:42 PM WET> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<Feb 25, 2009 5:09:42 PM WET> <Warning> <Server> <BEA-002611> <Hostname "192.168.75.84", maps to multiple IP addresses: 192.168.75.84, 127.0.0.1>
<Feb 25, 2009 5:09:42 PM WET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Feb 25, 2009 5:09:42 PM WET> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
DefaultServer startup time: 20996 ms.
DefaultServer started.
[Running application Web_Teste1 on Server Instance DefaultServer...]
---- Deployment started. ---- Feb 25, 2009 5:09:46 PM
Target platform is (Weblogic 10.3).
Running dependency analysis...
2009-02-25 17:09:47.026: Writing WAR file to /home/mvt/.jdeveloper/system11.1.1.0.31.51.88/o.j2ee/drs/Web_Teste1/Web_Teste1-ViewController-webapp
2009-02-25 17:09:47.04: Wrote WAR file to /home/mvt/.jdeveloper/system11.1.1.0.31.51.88/o.j2ee/drs/Web_Teste1/Web_Teste1-ViewController-webapp
2009-02-25 17:09:47.194: Writing EAR file to /home/mvt/.jdeveloper/system11.1.1.0.31.51.88/o.j2ee/drs/Web_Teste1
2009-02-25 17:09:47.213: Wrote EAR file to /home/mvt/.jdeveloper/system11.1.1.0.31.51.88/o.j2ee/drs/Web_Teste1
Redeploying Application...
<Feb 25, 2009 5:09:49 PM WET> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application Web_Teste1 is not versioned.>
Feb 25, 2009 5:09:49 PM oracle.adf.share.config.ADFConfigFactory cleanUpApplicationState
INFO: Cleaning up application state
<Feb 25, 2009 5:09:55 PM WET> <Warning> <HTTP> <BEA-101162> <User defined listener com.sun.faces.config.ConfigureListener failed: java.lang.NoClassDefFoundError: Could not initialize class sun.beans.editors.ColorEditor.
java.lang.NoClassDefFoundError: Could not initialize class sun.beans.editors.ColorEditor
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at java.lang.Class.newInstance0(Class.java:355)
Truncated. see log file for complete stacktrace
>
Feb 25, 2009 5:09:55 PM oracle.adf.share.config.ADFConfigFactory cleanUpApplicationState
INFO: Cleaning up application state
<Feb 25, 2009 5:09:55 PM WET> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1235581788818' for task '0'. Error is: 'weblogic.application.ModuleException: '
weblogic.application.ModuleException:
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1373)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:468)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
Truncated. see log file for complete stacktrace
java.lang.NoClassDefFoundError: Could not initialize class sun.beans.editors.ColorEditor
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at java.lang.Class.newInstance0(Class.java:355)
Truncated. see log file for complete stacktrace
>
<Feb 25, 2009 5:09:55 PM WET> <Error> <Deployer> <BEA-149202> <Encountered an exception while attempting to commit the 1 task for the application 'Web_Teste1'.>
<Feb 25, 2009 5:09:55 PM WET> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'Web_Teste1'.>
<Feb 25, 2009 5:09:55 PM WET> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
weblogic.application.ModuleException:
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1373)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:468)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
Truncated. see log file for complete stacktrace
java.lang.NoClassDefFoundError: Could not initialize class sun.beans.editors.ColorEditor
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at java.lang.Class.newInstance0(Class.java:355)
Truncated. see log file for complete stacktrace
>
[Deployer:149034]An exception occurred for task [Deployer:149026]deploy application Web_Teste1 on DefaultServer.: .
weblogic.application.ModuleException:
#### Deployment incomplete. #### Feb 25, 2009 5:09:55 PM
oracle.jdeveloper.deploy.DeployException
at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:247)
at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.deployImpl(Jsr88RemoteDeployer.java:157)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdeveloper.deploy.common.BatchDeployer.deployImpl(BatchDeployer.java:82)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdevimpl.deploy.fwk.DeploymentManagerImpl.deploy(DeploymentManagerImpl.java:436)
at oracle.jdeveloper.deploy.DeploymentManager.deploy(DeploymentManager.java:209)
at oracle.jdevimpl.runner.adrs.AdrsStarter$5$1.run(AdrsStarter.java:1365)
Caused by: oracle.jdeveloper.deploy.DeployException
at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.redeployApplications(Jsr88DeploymentHelper.java:561)
at oracle.jdevimpl.deploy.weblogic.common.Jsr88WeblogicDeploymentHelper.redeployApplications(Jsr88WeblogicDeploymentHelper.java:259)
at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:222)
... 11 more
Caused by: oracle.jdeveloper.deploy.DeployException: Deployment Failed
at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.redeployApplications(Jsr88DeploymentHelper.java:542)
... 13 more
#### Cannot run application Web_Teste1 due to error deploying to DefaultServer.
[Application Web_Teste1 stopped and undeployed from Server Instance DefaultServer]
i not understand why my fedora 10 give me this error ... -
Status of a specified package and program deployment
Good morning.
In the report "Status of a specified package and program deployment", I noticed there are 2 groups of reports; "Status of Targeted Resources" and "Resource Receipt Status". Each group has their own substatus:
Status of Targeted Resources:
Accepted - No Further Status, Succeded, Waiting
Resource Receipt Status:
Accepted, Expired, No Status
Can anyone guide me on the following?
1. The meaning of each status (Accepted-NFS, Succeeded, Waiting, Accepted, Expired, No Status).
2. Some of the count for status is less than what is displayed on the report after I exported to csv format. What does this mean? Does it mean some clients not detected or something?
3. Total percentage of each "Status of Targeted Resources" and "Resource Receipt Status" is around 100.1% and 99.9% respectively as per print screen below. What does this mean?
Your guidance is much appreciated. Thank you.Hi,
Accepted - No Further Status – Back end installation may be running and need to wait for some time to get the actual status
Succeeded – Deployment installed successfully without any issues
No Status - Systems are not online or has issue with SMS Agent, or not received the policy, if the system is online then this status must change in one hour time (if the status not changed then you may Suspect the issue with SMS / SCCM agent
Accepted – Deployment can be installed in few mins, as it will start downloading the software from remote /local system
Expired – Deployment is expired
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Jdeveloper version and ADF runtime on weblogic
Hi
I would need to understand the link between the jdeveloper version and the Weblogic version.
Based on this article http://tompeez.wordpress.com/2011/09/14/jdeveloper-versions-vs-weblogic-server-versions/
it sounds like the server version to use is directly linked to the version of ADF used for the development. It is true?
Specially is it true that there is not backward compatibility. A new weblogic server would not support a application that would have been developed with a older version of jdeveloper?
At the end I would like to get all my weblogic servers on the same version and as much possible on the newest version but if I need to rework the applications that were developed on a previous version of ADF , that can be really time consuming.
I would need best practice ideas .
When I have various projects oven a two -three years period how should we deal with keeping up with the new versions of weblogic and jdeveloper?
An another question I have is regarding the ADF run time. What is so special about it comparing to a regular set of libraries?. Why can I not deploy it as part of my application? Or is it possible and it is a better path then?
FInal point, I have a application that was developed with jdeveloper 11.1.1.0 and run on weblogic 10.3.0.0 . I would like to migrate to jdeveloper 11.1.1.4. I already converted the project with jdeveloper 11.1.1.4. What should I do next? What testing should I do to verfy the conversion worked? Should I update the weblogic server to 10.3.4 or can I go with a newer version like 10.3.5?
ThanksOk but then if you don't migrate and you are in a environment with also new development you are going to need many different servers no?
One welogic server for jdevleoper 11.1.0.0
One weblogic server for jdeveloper 11.1.2.0
One weblogic server for jdeveloper 11.1.3.0
One weblogic server for jdeveloper 11.1.4.0
How often should you migrate then because if you don't update you could be very behind after a couple of years and may be the migration could be almost impossible at that point.
We still have applications that where developed for oc4j 10 g and migration is almost rewrite at this point. (only after 3 years).
At the end, you get servers dedicated to some applications instead of having a stack of multi purpose servers.
Also let say you are starting with a project that is going to take two years, you start the developement with jdeveloper 11.1.5.0 and in two years it will jdeveloper 13.1.1.0. How do you manage this? You stay with 11.1.5.0?
We noticed that getting support for 10 g is really difficult at this point. Many people don't know anymore about 10 g and you don't get bug fix. If you don't get bug fix, how can you survive with your old version?
I know that ADF is not only about the face part, I 've been using the business services too but under ADF it is J2EE and then why ADF does not come as a set of libraries that you can link to in your J2EE project instead of becoming a server centric runtime?
People went to J2EE to get plateform independent, with ADF you are becoming server dependant. ADF is supposed to do better than .net but if you look at .net the IDE actually support old and new frameworks. If you get to develop on a older framework you can still use the new IDE. Also you can install several versions of the framework on the same server with .net.
From what I can read ADF is not even supported on JBOSS anymore so give me argument to choose ADF as a enterprise solution? Is it really the future? -
Run installation and uninstallation program as 32 bit process on 64 bit clients
A silly question but need some more explanation...Can anybody elaborate what this option means and in what conditions this can be used? Does this has to checked all the time?
Run installation and uninstall program as 32-bit process on 64-bit clients
: Use the 32-bit file and registry locations on Windows-based computers to run the installation program for the deployment type.Check out Jason's great post on this topic:
http://blog.configmgrftw.com/configmgr-2012-and-32-bit-application-installers/
Jeff -
I have been trying to use the SUN Deploytool to create .ear file for auto-deployment within Orion.
There are some small differences such as the JNDI naming method. But the big problem is during auto-deployment where I get the following error:
Auto-unpacking Error in application hello-planet-sun: Error loading package at file:/D:/temp/j2ee/home/
applications/Hello-planet-sun/ejb-jar-ic.jar, Illegal use-caller-identity value, legal values are True and False.
Has anyone any ideas as to which XML file tag needs ammending to get an ear to auto-deploy? Or is there a better way in which to craete an ear file?
thanks in advance<BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by Andrew Buckby ([email protected]):
I have been trying to use the SUN Deploytool to create .ear file for auto-deployment within Orion.
There are some small differences such as the JNDI naming method. But the big problem is during auto-deployment where I get the following error:
Auto-unpacking Error in application hello-planet-sun: Error loading package at file:/D:/temp/j2ee/home/
applications/Hello-planet-sun/ejb-jar-ic.jar, Illegal use-caller-identity value, legal values are True and False.
Has anyone any ideas as to which XML file tag needs ammending to get an ear to auto-deploy? Or is there a better way in which to craete an ear file?
thanks in advance<HR></BLOCKQUOTE>
Andrew -
In the past there have been problems with the Deploytool from Sun as relates to Orion. I don't know if those problems have been worked out, but none-the-less I gave up on that a year or so ago. I use ant to create my ear files in practice but am currently evaluating the JDeveloper beta and thus far am reasonably impressed with the ease of use. I would give that a try if you have the bandiwdth to download it. Investigate Ant for another alternative - though you have to create your own web.xml and ejb-jar.xml files (as well as the application*.xml files). Sometimes I use the sucky tools that come with Orion (OCJ4) to help out as far as creating the related XML files and to create the ear file. Depends on my level of tolerance that particular day. -
Seperate OBIEE installation and Weblogic Installation
Hi,
Our requirement is to setup the HA system in the Production for the OBIEE. We have Admin server as active-passive on the 2 OBIEE instances.
We trying to setup the high availability of the Admin server as per the Oracle Enterprise Deployment guide. If I setup that and manually failover the Admin server the user cannot login if the Admin server is migrated to second application server.
So our next option is to install the weblogic on the NAS shared storage and scale out the OBIEE components on the 2nd Application server so that Active-Passive Admin server can access the same settings on the shared storage. So the question is it possible to separate the weblogic and OBIEE installation directories separately in order to achieve high availability.
Thanks:
Apurv.The URL will be exactly the same as a Windows installation but will have your Unix server name. You will need to learn how to start and stop the OBIEE services and OC4J in Unix. This is pretty well documented on the Infrastructure Installation and Configuration Guide.
-
Jdeveloper installation - installer problem
I am trying to install jdeveloper (jdevstudio11116install.exe) in a new bea home, in which I have already successfully installed weblogic 10.3.6 with oepe, osb and soa.
After I choose the middleware home directory, the error says:
"The product maintenance level of the current installer (Weblogic Server: 10.3.5.0) is not compatible with the maintenance level of the product installed on your system (Weblogic Server: 10.3.6.0) . Please obtain a compatible installer or perform maintenance on your current system to achieve the desired level".
I tried to install jdeveloper11115 on the same installation, but the error is the same. Is there something wrong with the order of the installation?
If I provide a different folder it is ok, but a new weblogic installation is required, which is not an option. Is there another version of jdeveloper that would 'sit' on the existing 10.3.6 installation?
I found similar posts, but they regard upgrading. I am installing from scratch. I do not want to update/upgrade. I have done this without a problem with previous versions (10.3.4 and 10.3.5) of middleware in the same machine. What has changed?There is no Jdeveloper installation for 11.1.1.6 coupled with WLS 10.3.6. It comes with WLS 10.3.5 only . You will have to install WLS 10.3.6 separately if you need it.
Quoting Chris Muir from https://blogs.oracle.com/onesizedoesntfitall/entry/adf_runtimes_vs_wls_versions
Note with the release of JDeveloper 11.1.1.6.0 there is a subtle change in the ADF Runtime to WLS version pairing. The latest ADF Runtimes 11.1.1.6.0 can run against WLS 10.3.6 and 10.3.5.
This is the first time in the 11.1.1.X branch we've seen a version run on two versions of WLS.
As such if you have a 10.3.5 WLS server or have just installed WLS 10.3.6 you can also happily install the 11.1.1.6.0 ADF Runtimes on either.
Customers need to be careful though as this does not imply the opposite.
If you install WLS 10.3.6, only the ADF Runtimes 11.1.1.6.0 are certified, the 11.1.1.5.0 ADF Runtimes are not (though the 11.1.1.5.0 ADF Runtimes are still of course certified against WLS 10.3.5).For your issue see -
Not able to install Jedeveloper on SOA Suite 11g 11.1.1.6
Tip - "Make sure you install JDeveloper and WLS+SOA in totally Different middleware homes (different folders)"Edited by: Sudipto Desmukh on May 17, 2012 2:21 PM -
About how to build dynamic maps using jdeveloper 10g and mapviewer
i follow the guidance (about how to build dynamic maps using jdeveloper 10g and oracle application server mapviewer) to write a jsp file,but error take palce ,i get information "Project: D:\jdev1012\jdev\mywork\WebMap\ViewController\ViewController.jpr
D:\jdev1012\jdev\mywork\WebMap\ViewController\public_html\WebMap.jsp
Error(12,37): cannot access class oracle.lbs.mapclient.taglib.MapViewerInitTag; file oracle\lbs\mapclient\taglib\MapViewerInitTag.class not found
Error(12,190): cannot access class oracle.lbs.mapclient.taglib.MapViewerInitTag; file oracle\lbs\mapclient\taglib\MapViewerInitTag.class not found
Error(12,102): cannot access class oracle.lbs.mapclient.taglib.MapViewerInitTag; file oracle\lbs\mapclient\taglib\MapViewerInitTag.class not found
Error(12,28): cannot access class oracle.lbs.mapclient.MapViewer; file oracle\lbs\mapclient\MapViewer.class not found
Error(12,40): cannot access class oracle.lbs.mapclient.MapViewer; file oracle\lbs\mapclient\MapViewer.class not found
Error(13,37): cannot access class oracle.lbs.mapclient.taglib.MapViewerSetParamTag; file oracle\lbs\mapclient\taglib\MapViewerSetParamTag.class not found
Error(13,198): cannot access class oracle.lbs.mapclient.taglib.MapViewerSetParamTag; file oracle\lbs\mapclient\taglib\MapViewerSetParamTag.class not found
Error(13,106): cannot access class oracle.lbs.mapclient.taglib.MapViewerSetParamTag; file oracle\lbs\mapclient\taglib\MapViewerSetParamTag.class not found
Error(14,37): cannot access class oracle.lbs.mapclient.taglib.MapViewerRunTag; file oracle\lbs\mapclient\taglib\MapViewerRunTag.class not found
Error(14,188): cannot access class oracle.lbs.mapclient.taglib.MapViewerRunTag; file oracle\lbs\mapclient\taglib\MapViewerRunTag.class not found
Error(14,101): cannot access class oracle.lbs.mapclient.taglib.MapViewerRunTag; file oracle\lbs\mapclient\taglib\MapViewerRunTag.class not found
Error(15,37): cannot access class oracle.lbs.mapclient.taglib.MapViewerGetMapURLTag; file oracle\lbs\mapclient\taglib\MapViewerGetMapURLTag.class not found
Error(15,200): cannot access class oracle.lbs.mapclient.taglib.MapViewerGetMapURLTag; file oracle\lbs\mapclient\taglib\MapViewerGetMapURLTag.class not found
Error(15,107): cannot access class oracle.lbs.mapclient.taglib.MapViewerGetMapURLTag; file oracle\lbs\mapclient\taglib\MapViewerGetMapURLTag.class not found"
can you help?
greetingsI found a lot of information in document 133682.1 on metalink.
step by step example how to deploy a JSP business component application. -
EMC Symmetrix Installation and Administration on Solaris
Hi,
Could anyone tell me where i can get good documents on Installation and administration of EMC Symmetrix devices with a volume manager on a Solaris box.
Thanks.On another note... is there a Sparc equivalent for the mod_wl_ohs.conf where we would place
<Location /<deployed app>>
SetHandler weblogic-handler
WebLogicHost <weblogichost>
WebLogicPort 7001
</Location>
It appears that this goes into the apache httpd.conf file, correct? Or does the mod_wl_ohs.conf equivalent exist?
We have just about completed everything in regard to being able to include a solaris host in our list of hosts that are tied to OAM. The webgate was created and software installed, the deployed app protected, etc... Everything that we have done for Linux and XP in the past we have done for this Sparc host.
When we try to access the Sparc's protected uri... nothing happens. The browser stays blank... the url does not change to display the oamsso login.html (as the other installs do)... nothing is returned... no error, no remarks, no logfile entries... just a blank browser. -
We are currently using CM2012r2 for Endpoint protection, and in trying to save licensing costs, I have been given the task of doing imaging and application deployment through CM as well... everything started off well... noticed that imaging took a lot longer
than I remembered when I used CM2007 at my previous employer. Found we needed hotfix 2910522 and what took an hour to download now only takes 5 minutes (yay!) Then started other strange issues. Mostly the fact that in the task sequence, the install application
blocks (we have 3 with 4-8 apps each) suddenly got really slow to execute. (boo!) The application blocks eventually finish, but take about 5 hours and only the last block actually installs. For example: 7zip takes 15 minutes to "install"
but since it isn't in the last block, it doesn't in fact install on the system.
so here is what I know so far:
Updated the boot image after applying the hotfix
Added the hotfix to the Windows and configmgr setup step command line to install the patch
Verified that all applications install correctly outside of the task sequence.
Created a new task sequence just in case the hotfix messed something up.
here is what I've noticed:
Only happens on workstations that have been imaged previously by CM (even if I remove the machine from AD and CM)
New machines image just dandy
not hardware specific (tested on 5 different laptop models and 3 desktop models)
workstations that have the issue, when finished, only installed the applications from the last block (4 apps) and none from the previous 2 blocks (16 applications)
If imaged new (not previously known) it installs the client correctly and it checks in, ones with the issue are in internet only mode and don't see the PKI cert for the machine, and will not check in.
Things I've checked, double checked, verified, and done:
All applications have the box for "allow this application to be installed from the Install Application task sequence action..."
applications are on all distribution points
Distribution points are healthy
One MP/DP was complaining about how it couldn't access a SMS folder. uninstalled the roles, let it sit over the weekend, reinstalled this morning
Verified that the servers were on 10Gb full and were not throwing error on the line
Antivirus scanning was not scanning the store (used the built in template for scep)
Next steps that I am going to try:
create a new task sequence and split up install application blocks to only have single applications in them
recreate the boot wim for the media
Thanks in advanceSo this issue of yours is in B&C -task sequence? You're using capture CD for capturing, why? Why not automate the build entirely.
I'd suggest you add this:
http://support.microsoft.com/kb/2775511/en-us to your BUILD image (either online of offline, in the WinPE -phase), it fixes many WMI related problems.
After you've done your golden .wim, deploy it to your clients.
We don't do a build and capture because certain applications require handling on our part. Management has said it needs to be a certain way, therefore this is how we have to build it. (mostly settings, and views that can't be controlled through registry,
Group Policy, etc.) There are users that if they have to click on an accept button or it isn't the right color, or they want a different icon in their lab, then they go to the top and it comes back down to us, and our lives become miserable.
We create the image in audit mode, capture it using boot media, and sequence in things that are updated constantly (flash, shockwave, java, etc.) through the task sequence.
in relation to that KB, why would it work on new machines but not ones that have been touched before? -
Jdeveloper App and Installshield Java edition
I have created a JDeveloper application and I have used Installied Java Edition to deploy. It is a stand alone application with an oracle database. Following the Install the user runs the app and get
<< ...OLE Obj... >>
any comments would be appreciated.Did you do this:
http://download.oracle.com/docs/cd/E14571_01/install.1111/e13666/ojdig.htm#BDCFFEJC -
im in the military and im deployed right now i got n ipod touch but it wont let me download apps . i put all my billing info and address in but it keeps telling me that i need to contact the support to complete my transaction
it keeps telling me that i need to contact the support to complete my transaction
Then contact Support.
http://apple.com/support/itunes/contact/
Maybe you are looking for
-
No colors when printing through AirPort Express?
I knew I couldn't use all the features (e.g. scanning) of my HP all-in-one printer F2180 through AirPort Express instead of USB. But is it normal I can't print in colors? Can it be fixed?
-
Logon Page Customization in SAP Portal 7.31
Hi Experts, I am planning to change the look and feel of the Logon Page for Portal. The current page is already a customized one. For making the changes, I requested and got the following files. 1. tc~sec~ume~logon~ui.war from <drive>:\\usr\\sap\\<SI
-
Hi All, There is is requirement to determine the quantity of the stock items in a BOM. This is a functionality that is requested quite often, and I was looking if someone has implemented this. Thanks
-
" STEPS TO CONFIGURE SAP UNIVERSE "
Dear guys, Can anybody send me the steps to establish a universe on the following conditions:: (1) My source system is SAP R/3. (2) My source system is SAP BW/BI (3) My souce system is Java or dotnet .
-
I give an example of a video... If I want to open this video my firefox crashes ;(