JDeveloper Integration With CollabNet Team Forge

Dears
I would like to integrate Jdeveloper with Collabnet Team forge platform.
Is this integration currently supported. If yes are there any materials to support in configuring the integration
Best regards
Mohamed Chargui

Mohamed,
Yes Jdeveloper has been integrated with TeamForge, using CollabNet Connect; check out the following link http://www.open.collab.net/collabXchange/JDeveloper.
For peer discussions, you also may want to see http://forums.open.collab.net/ds/viewForumSummary.do?dsForumId=736
Cheers, Lothar Schubert

Similar Messages

JDeveloper integration with SOA 10.1.3.4

Hi Experts,
I need to integrate the JDeveloper with SOA 10.1.3.4 version. Please let me know what version of JDeveloper I need to install and what are the steps.
Thanks for your help.
Shashi

JDev 10.1.3.4 is available here -
http://www.oracle.com/technetwork/developer-tools/jdev/downloads/soft10134-082660.html
Post your JDev related queries here -
JDeveloper and ADF
Regards,
Anuj

JDeveloper integration with Serena PVCS Version Manager

I have seen that Oracle JDeveloper 10.1.3 now supports Serena Dimensions for versioning. What about Serena PVCS Version Manager 8.1? Are there any plans to integrate JDeveloper with the PVCS Version Manager?

Hi all,
Ward - Brian is absolutely right. As I said in my first posting on this topic (above), we have
not yet developed an extension for JDeveloper to enable users to work with PVCS Version
Manager, which I believe is a specific product, rather than an interface.
This is why I'd greatly appreciate it if you could possibly provide more details of this Interface
and indeed what Oracle support for PVCS with JDeveloper Merant referred to. Please see my
first posting above for more details.
Brian - I'm sorry you do not agree with our approach of using the open published SCM Framework
to build your own extensions for using JDeveloper with other source code control tools than those
we support.
In an ideal world, we would have been able to offer support for every source code control tool on
the market with our first release of 9i JDeveloper. We were very keen to be able to achieve this and
we still plan and are currently looking into supporting more tools going forward and as many tools as
possible in the long term.
Unfortunately, we only have limited time available for each release and based on the feedback we
received, after our committment to support Oracle9i SCM, CVS and ClearCase were the most requested.
Therefore, we tried to reach a compromise to enable users to provide their own support for a specific
tool should they wish, if they did not use any of those tools supported. Indeed, our research suggests
that the market for source code control tools is quite fragmented and that customers use a wide range
ot tools. So, we decided to publish our own SCM Framework, the same one we used for the SCM, CVS
and ClearCase support, in order to help users build their own extensions in a similar way to ours.
Hope this helps,
Regards,
Dominic Battiston
JDeveloper Product Management
Oracle Corp

How to use BC4J with JDeveloper 9i in a Team

Hello
I'm not sure if I'm to stupid, but to say the truth I didn't found the clue how to share a BC4J Application between several develeopers. Maybe someone can give me a hint.
That's my situation:
Our team is going to develop a web application using BC4J and BC4J-JSP, nothing special I think.
But my problem is, that BC4J and especially the wizards refer to a lot of different files. Even simple changes often result in multiple files being changed in different parts of the project.
Creating a view link between view objects in two packages for example changes the view objects in both packages. Also the project (.jpr) file or several "BC4J.xcfg" files are changed very often.
So it is not easy to find parts of code from which I can say they are owned by one developer and others which are owned by another. Most often, if you have to merge the work of different developers, you have to edit the BC4J-XML-Files using an external editor. Or did someone find a better way? Please tell me!
So, what is the best way to share code between developers?
Should I partition the application by packages?
- advantage:
it allows a fine partitioning
- disadvantages:
it has the great danger that BC4J makes changes in other packages which will be overseen when merging.
Should I create a projects for each developer and distribute code between the projects using libraries?
- advantage: no unseen changes will happen, as the libraries are readonly.
- disadvantages: no view links between view objects in different projects (Libraries) are possible! Also a lot of "load errors" can occure when updating a library, which have to be manually corrected in the dependent projects.
Are source code management systems a real help in this problem or do they just "manage" the problem? I already tried SCM and PVCS but was not very happy with the way of working. As JDeveloper is not "really easy" to use with theese tools.
So I would like to get any hints how other developers are dealing with this problem. Are you using BC4J with JDeveloper 9i in a team? Please tell me how do it and how you have partitioned your application.
Thanks in advance
Frank Brandstetter

Hi,
I'm not sure whether my answer is good enough for you, but it might help.
First of all, you have to use JDev 9.0.3, because 9.0.2 has big problems with associations/view links between objects in different projects.
Creating a view link between view objects in two packages for example changes the view objects in both packages. Also the project (.jpr) file or several "BC4J.xcfg" files are changed very often.This is not completely true in 9.0.3, as you may choose not to create an accessor in the imported object (and usually you don't need it neither!). As for bc4j.xcfg, there is a trick: define a "standard" database connection name to use all over your project! This will prevent modifying these files all the time!
Should I create a projects for each developer and distribute code between the projects using libraries?
- advantage: no unseen changes will happen, as the libraries are readonly.
- disadvantages: no view links between view objects in different projects (Libraries) are possible! Also a lot of "load errors" can occure when updating a library, which have to be manually corrected in the dependent projects.I would say, projects for each application component, which by chance will be managed by a single developer at a time.
As for the disadvantages, in 9.0.3 you are able to properly create associations and links using read-only objects. Hopefully, the release version will solve some generation inconsistencies...
Concerning the errors that occur when modifying a library, this might be balanced by the relative independence of the components... If you are able to develop following the dependency tree, you will not meet the problem very often.
Are source code management systems a real help in this problem or do they just "manage" the problem? I already tried SCM and PVCS but was not very happy with the way of working. As JDeveloper is not "really easy" to use with theese tools.Indeed, I do not have a SCMS really able to manage merges in the BC4J XML files... We rather try not to arrive there!
So I would like to get any hints how other developers are dealing with this problem. Are you using BC4J with JDeveloper 9i in a team? Please tell me how do it and how you have partitioned your application.I really hope that my hints will help.
Regards,
Adrian

Java Stack mandatory for a SAP BI system integrated with EP?

Hi Guru's,
Currently we are using SAP NetWeaver 2004 s version 7.0 system for our BI.
This is integrated with the EP. But our BI system does not contain the Java Stack installed.
When we work on WAD templates and execute the template, it is automatically directed to EP portal where we can see our reports.
Here my question is do we need Java Stack for this system to use ADOBE DOCUMENT services or can it work with EP only for the web functionalities.
Any info on this is of great help.
Best Regards
Kumar

HI Reddy,
We came to know from our basis team that we do not have the Java Stack installed in our BI 7.x system yet.
As it is integrated with EP which has Java, our web reports are working.
1) But my question is still do we ned to install the Java Stack in our BI system as i do not find any Export to PDF option in EP for the reports (eventhough AS Java supports this).
2) Or can we use the existing configuration without Java STack integrated to EP for the new tools like Report Designer and Integrated Planning?
Regards
Kumar

Integration with PeopleSoft Applications Using Oracle SOA Suite 11g BPEL

Hi,
I'm integrating BPEL with Peoplesoft FSCM 9.0 Application on tools 8.49 using Oracle SOA Suite 11g. The BPEL invokes the web service method generated from Peoplesoft Component Interface in a synchronuos manner.
I have deployed the BPEL in Oracle SOA Suite 11g using Jdeveloper successfully but I have problem in configuring the BPEL node in Peoplesoft side using Oracle SOA Suite 11g(FMW) . I had done the integration of BPEL with Peoplesoft FSCM 9.0 on tools 8.49 using Oracle SOA Suite 10g earlier successfully by configuring BPEL node properties as follows:
BPEL CONSOLE : http://Host Name:8888/BPELConsole (System with Oracle SOA Suite 10g server for deployment)
BPEL DOMAIN : default
Using this BPEL node configuration, I was able to ping the BPEL console of Oracle SOA Suite 10g from peoplesoft and hence complete the integration successfully.
Now in order to acomplish Business rules and other functionality, the BPEL application has been developed in Oracle SOA Suite 11g using Jdeveloper 11g. This time I'm not able to configure the BPEL node in Peoplesoft for this integration as I'm assuming there is no separate BPEL console in Oracle SOA Suite 11g. All the BPEL deployments are administered in console (11g console used for deployment of BEPL)
http://Host Name:7001/em (System with Oracle SOA Suite 11g server - Fusion Middleware).
So when I Configured the BPEL node property in Peoplesoft as :
BPEL CONSOLE : http://Host Name:7001/em (System with Oracle SOA Suite 11g server for deployment)
BPEL DOMAIN : default
I'm not able to ping the Peoplesoft BPEL node to the Oracle SOA Suite 11g. Hence I'm not able to proceed with my integration.
When I searched the OTN discussion forum on BPEL console for Oracle SOA Suite 11g, all threads point that there is no separate BPEL console unlike Oracle SOA Suite 10g. Also most of the articles for Integration with Peoplesoft Application using SOA 11g do not state any specific configuration setting for property of Peoplesoft BPEL node in order to integrate with BPEL 11g. The examples published in OTN still point towards screen shots of integration using SOA Suite 10g.
So I'm not able to proceed in this regard.
Any help in this regard is highly appreciated.
Thanks in Advance,
Girish
Edited by: user11214154 on Nov 23, 2009 8:12 PM
typo error

Hi,
I found this document from the Oracle Open World 2009 (maybe you have found it too) :
"Integration with PeopleSoft applications using oracle soa suite 11g BPEL" --> [http://www.oracle.com/technology/tech/fmw4apps/peoplesoft/pdf/oow2009-bpel-psft.pdf]
And this could be a little more simple, but have a good step-by-step tutorial.
[http://www.oracle.com/technology/obe/fusion_middleware/fusion/soa/BPEL_PS848/OBE_PSFT_BPEL_848.htm]
I think you must read this docs by now, but never come amiss.
Hope this can help you,
By the way, if you can help me with this I'll appreciate it a lot.
Unable to access the following endpoint(s)

Oracle ADF security integration with Oracle E-Business Suite SDK JAAS

I have an Oracle ADF 11.1.2.2 application that is using ADF security for authentication and authorization.
When we deploy this application to our JDeveloper integrated weblogic server, we utilize the security setting of "Custom" and use weblogic users and roles to map to the ADF application roles. In that environment our security is working properly.
I have a Weblogic 10.3.5 standalone server that has the ADF runtime installed as well as the Oracle E-Business Suite SDK JAAS implementation installed.
When I deploy the Oracle ADF application to the standalone weblogic server, I am directed to the JAAS login page when I attempt to access any JSF page (including those that I have granted View access through the anonymous-role. Does the Oracle ADF anonymous-role work (allow for anonymous page access) when JAAS security is handled by the Oracle E-Business Suite SDK JAAS implementation?
Per the SDK instructions, when we install the Oracle ADF deployment on Weblogic we have selected "DD only" for our security setting. We have defined enterprise roles in the Oracle ADF security setup (jazn-data.xml) that are assigned the appropriate application roles. Those enterprise roles have the same name (i.e. UMX|YOURROLE) as the E-Business Suite roles that are assigned to our test users. When we login with an E-Business Suite user / password we are receiving an error:
Error 401--Unauthorized
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.2 401 Unauthorized
Any thoughts on why that would be?
Thanks
Dan

Thanks Juan.
With the debugging options enabled it appears the issue is not an issue with the user / role credentials - it seems like the resource grants from jazn-data.xml are not being reviewed in my standalone weblogic instance EAR deployment:
[JpsAuth] Check Permission
PolicyContext: [TestApp]
Resource/Target: [untitled1PageDef]
Action: [view]
Permission Class: [oracle.adf.share.security.authorization.RegionPermission]
Result: [FAILED]
Evaluator: [ACC]
Failed ProtectionDomain:ClassLoader=sun.misc.Launcher$AppClassLoader@13f5d07
CodeSource=file:/app/oracle/product/Middleware/oracle_common/modules/oracle.adf.share_11.1.1/adf-share-support.jar
Principals=total 2 of principals(
1. JpsPrincipal: oracle.security.jps.internal.core.principals.JpsAnonymousUserImpl "anonymous" GUID=null DN=null
2. JpsPrincipal: oracle.security.jps.internal.core.principals.JpsAnonymousRoleImpl "anonymous-role" GUID=null DN=null)
When I access the same page from my integrated weblogic server I see:
[JpsAuth] Check Permission
PolicyContext: [TestApp]
Resource/Target: [untitled1PageDef]
Action: [view]
Permission Class: [oracle.adf.share.security.authorization.RegionPermission]
Result: [FAILED]
Evaluator: [ACC]
Failed ProtectionDomain:ClassLoader=sun.misc.Launcher$AppClassLoader@13f5d07
CodeSource=file:/app/oracle/product/Middleware/oracle_common/modules/oracle.adf.share_11.1.1/adf-share-support.jar
Principals=total 2 of principals(
1. JpsPrincipal: oracle.security.jps.internal.core.principals.JpsAnonymousUserImpl "anonymous" GUID=null DN=null
2. JpsPrincipal: oracle.security.jps.internal.core.principals.JpsAnonymousRoleImpl "anonymous-role" GUID=null DN=null)
When I review my EAR - I do see jazn-data.xml at:
/META-INF/jazn-data.xml
I will review the system-jazn-data.xml to see if the policy information has been migrated properly as part of the EAR deployment.
Thanks.
-Dan

MI Integration with 7.3

Dear Team,
WRT The specified item was not found. kindly suggest if an MI can be installed on an ABAP only system and later integrated with a Netweaver 7.3 Java platform.
Regards,
Varun Biswas

Hello Ashish,
Thanks for clearing my doubt. Is it possible to install MI on an 7.01 ABAP stack and configure it for a NetWeaver 7.3 system?
Because I know MI can be added as a usage type provide both the stacks are available. Note 000883948 shows the dependency.
Regards,
Thanks

Ask the Expert: C-Series Integration with Cisco Unified Computing System Manager

Welcome to the Cisco Support Community Ask the Expert conversation. This conversation is an opportunity to learn and ask questions about Cisco C-Series Integration with Cisco Unified Computing System® Manager (Cisco UCS® Manager) with Cisco experts Vishal Mehta and Manuel Velasco.
Cisco UCS C-Series Rack-Mount Servers are managed by the built-in standalone software, Cisco Integrated Management Controller (Cisco IMC). When a C-Series rack-mount server is integrated with Cisco UCS Manager, the IMC no longer manages the server. Instead you will manage the server using the Cisco UCS Manager GUI or Cisco UCS Manager command-line interface (CLI).
Cisco UCS Manager 2.2 provides three connectivity modes for Cisco UCS C-Series Rack-Mount Server management. The following are the connectivity modes:
Dual-wire management (shared LAN On Motherboard [LOM]): Shared LOM ports on the rack server are used exclusively for carrying management traffic.A separate cable connected to one of the ports on the Payment Card Industry Express (PCIe) card carries the data traffic.
SingleConnect (Sideband): Using Network Controller Sideband Interface (NC-SI), the Cisco UCS Virtual Interface Card 1225 (VIC1225) connects one cable that can carry both data and management traffic.
Direct Connect Mode: Cisco UCS Manager Version 2.2 introduces an additional rack server management mode using direct connection to the Fabric Interconnect.
Vishal Mehta is a customer support engineer for Cisco’s Data Center Server Virtualization Technical Assistance Center (TAC) team based in San Jose, California. He has been working in the TAC for the past 3 years with a primary focus on data center technologies such as Cisco Nexus® 5000, Cisco UCS, Cisco Nexus 1000V, and virtualization. He presented at Cisco Live in Orlando 2013 and will present at Cisco Live Milan 2014 (BRKCOM-3003, BRKDCT-3444, and LABDCT-2333). He holds a master’s degree from Rutgers University in electrical and computer engineering and has CCIE® certification (number 37139) in routing and switching and service provider.
Manuel Velasco is a customer support engineer for Cisco’s Data Center Server Virtualization TAC team based in San Jose, California. He has been working in the TAC for the past 3 years with a primary focus on data center technologies such as Cisco UCS, Cisco Nexus 1000V, and virtualization. Manuel holds a master’s degree in electrical engineering from California Polytechnic State University (Cal Poly) and CCNA® and VMware VCP certifications. Remember to use the rating system to let Vishal and Manuel know if you have received an adequate response.
Because of the volume expected during this event, our experts might not be able to answer every question. Remember that you can continue the conversation in the Data Center, under subcommunity, Unified Computing, shortly after the event. This event lasts through May 23, 2014. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

Hello Sebastian,
The different modes of connecting C-Series with UCSM come into play depending on the type of infrastructure you already have along with C-Series and NIC model.
Cisco UCS C-Series Rack-Mount Servers are managed by the built-in standalone software, Cisco Integrated Management Controller (CIMC) .
Powerful features provided by Cisco UCS Manager can be leveraged to manage C-Series server by integrating C-Series Rack-Mount Server with UCSM.
This not only gives you rich-feature set but also one management plane to operate UCS-B Series Chassis and UCS-C Series Rack Server.
You will manage the server using the Cisco UCS Manager GUI or Cisco UCS Manager CLI.
Cisco UCS Manager 2.2 provides three connectivity modes for Cisco UCS C-Series Rack-Mount Server management.
The following are the connectivity modes:
• Dual-wire Management (Shared LOM):
Shared LAN on Motherboard (LOM) ports on the rack server are used exclusively for carrying management traffic. A separate cable connected to one of the ports on the PCIe card carries the data traffic. Using two separate cables for managing data traffic and management traffic is also referred to as dual-wire management.
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm2-2/b_C-Series-Integration_UCSM2-2/b_C-Series-Integration_UCSM2-2_chapter_0100.html
This mode is recommended when you have C-Server which does not have or cannot support VIC 1225 card (such C-200 server)
• SingleConnect (Sideband):
Using Network Controller Sideband Interface (NC-SI), Cisco UCS VIC1225 Virtual Interface Card (VIC) connects one cable that can carry both data traffic and management traffic.
This feature is referred to as SingleConnect.
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm2-2/b_C-Series-Integration_UCSM2-2/b_C-Series-Integration_UCSM2-2_chapter_011.html
This most recommended Integration model when using FEX and VIC 1225 card
• Direct Connect Mode:
Cisco UCS Manager release version 2.2 introduces an additional rack server management mode using direct connection to the Fabric Interconnect.
This mode will eliminate the need for FEX module as Servers are directly plugged into the base ports of Fabric Interconnect
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm2-2/b_C-Series-Integration_UCSM2-2/b_C-Series-Integration_UCSM2-2_chapter_0110.html
Please let us know if you need more information. Thank you!
Thanks,
Vishal

ISE integration with Mobile Device Management ( MDM ) help required

Dear Techies,
     Am here bring to your notice an different issue and no much resources to support even in PEC or Cisco Document.
     We are conduction a Proof Of Concept (PoC) on Secure Bring Your Own Device ( BYOD ) using Cisco ISE and gonna test all the scenarios like Wired, Wireless and VPN user access.
Setup Brief :
=========
      Our Setup has ISE VM acting as Admin, Monitor and Profiling Device, we have NAC 3315 physical Appliance as Inline posture Device, Wireless LAN controller, Access point and the Identity source as Microsof Active Directory
     Having Plans to Integrate Mobile Device Management ( MDM ) and Citrix VDI setup also.
Activity Brief:
=========
     As of now we have tested the Wired Scenario Authentication and authorization for guest users and gonna carry out the profiling and posture.
Clarifications Required
================
Wired Scenario - Require some configuration / steps on how to carryout posture for the guest wired users i.e. LAPTOP.
Wireless Scenario
MDM can be integrated to ISE ?
How the MDM can be integrated to Cisco ISE configuration or Guide to show the same?
What is the demarcation between MDM and ISE ( i.e. What is the role of ISE and MDM on Mobile Devices ) ?
If MDM is available so then when the control of ISE ends, does MDM do management or ISE will do management of the devices ?
Is MDM will do client provisioning or ISE should do ?
Is MDM send or update patches of Mobile Devices ?
As of now these are the scenarios, kindly revert if any good documents to show this or share your expertise on the Integration Part.
Thanks for Reading...
Arun

I would like to avail your valuable inputs to understand on the Client provisioning part for the Mobile Devices/ Laptop. I understand from your reply that MDM integration is not available in the current release ISE 1.1 - That is correct.
Kindly let me know your views or any documents on the following scenarios with the current release in mind
1. User with Mobile devices connecting to Wireless ( both Employee and Guest ) , How the Flow differs for the Employee and Guest. How the client provisioning is done ( i.e. Like Posturing or Compliance Check ).
The posturing and compliance check is done based on the user authentication information (i.e. AD memberOf vs Guest user) combined with the users endpoint (windows, mac osx, or a mobile device), ISE then has a few decisions to make based on the authorization policies. For example, if a Domain User coming from a Windows 7 machine joins the network, then can either use the nac agent, or the web agent. Then you can scan for registry settings, file settings, program requirements, hotfix compliance...and the list goes on. If the user fails a check then you can either assign an acl for the user so they only have guest access, or you can place them into a remediation vlan the options are entirely up to the requirements and however the solution is implemented.
2. User with Laptop connecting to Wireless ( both Employee and Guest ). How the client provisioning is done ( i.e. Like Posturing   or Compliance Check ).
Guests are usually redirected to the guest portal which they authenticate and their user group falls within the Guest container that is on the ISE internal database, that is usually coupled with an authorization profile that grants them internet access. For the client provisioning, that is usually done based on the operating system, via profiling (dhcp, and user agent string., netmap...etc) and can be fine tuned for all laptops or to a specific set of users based on their group membership.
3. What are advantages of having ISE also in place for Mobile devices, since most of the Mobile related tasks ( like Authentication, Authorization, Profiling and Posture ) are carried out by MDM. I am checking for the significant advantage of having ISE for Client network having only Mobile devices. Kindly clarify.
Currently the advantage of Cisco ISE is that it supports profiling within wireless and really fits well within a network that has mostly Cisco products since they are all part of of the Borderless security initiative being driven on the backend. The product teams for wireless, wired, security (vpn..etc) and ISE are pretty close in building their solutions so that you can get connected with any device any where (sorry for the sales pitch). The latests wireless code is improving and is going to have support similar to the ios sensor for wired devices where dhcp, cdp, and other attributes can be sent in the radius packet for better profiling decisions. With integration for an MDM platform coming soon, and also support for TACACS rumored (have to verify with your account rep) you have options that really stand out from a unit that only supports MDM. Cisco ISE also comes with a wireless product ID so that makes the budget work when it comes to deploying ISE if you arent looking for enforcement on your wired devices.
4. Do you recommend 802.1X Authentication to use for the Employee and Contractor? The Guest user authentication as Open ?
For internal users and vendors the best option by far is dot1x, almost all operating systems are capable of performing dot1x and the 1.1.1 MR has a piece now that can provision the supplicant for the users, by using scep to enroll certificates or configure peap settings.
There is a feature within the guest portal that allows you to statically assign guests into endpoint group, that feature is called device registration web authentication. It seems like an open network but uses mac filtering to assign these devices to an endpoint without requiring users to enter any credentials. They are presented with an AUP page, once they accept their mac address is mapped to the endpoint group
5. How can we ensure the Encryption of traffic from the Guest user to the NAD ( Network Access devices ) ?
This may be a wireless question but I am sure the encryption is done using AES and using dot1x as the key management here is a brief background for this - http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00807f42e9.shtml#L2
You can also use the anyconnect client which can provide macsec which is layer 2 encryption for wired - http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6032/ps6094/ps6120/qa_c67-622477_ns1049_Networking_Solutions_Q_and_A.html
6. We are also looking for VDI ( Citrix, VMware ) solution for the client ( both Employee and Guest ) , how ISE can play a role in securing the VDI environment.
For most thin clients you can perform dot1x authentication on the device itself, however that is something the manufacturer will have to support. This is a little gray for me.
7. Is that any integration required with Citrix or VMware. How the VDI can be offered based on the User role ( i.e. Employee, Contractor or Guest ), since Guest database is available only with ISE, how the checks are made from the VDI environment.
IN ISE there is an identity sequence which can authenticate users in AD first, if the user is not found then it can look in the internal database.
Our solution demands MDM in the integrated solution, As on today ISE cant be integrated with MDM. so what kind of solution we can propose to have MDM and Cisco ISE .Do the clients now enter the network should have already installed the MDM agent (or) any other way of pushing the same to the Client.
Today there is no integration between the devices, the last release time I heard was December for this feature. However it would be best to confirm with your Cisco Account rep on this issue.
Thanks,
Tarik Admani
*Please rate helpful posts*

MSP Integration with Oracle Projects

Hi Dina,
Does the integration between MSP and Oracle Projects work without any issues in R 12.1.3? We've tried using it in the past with R 12.0.6 but have to say the experience was not good. It used to work at times and fail on other times. Most of the times the first time import from MSP to Oracle Project used to work but subsequent changes to the WBS used to give issues while trying to import into Oracle Projects (even though the link to the Oracle Project existed in MSP).
One of our new customers (Construction Company) wants to create the WBS in MSP (Microsoft Project ver 2003 or 2007) and then import it into Oracle Projects to track progress, effort and cost. Any changes to the WBS (which happens frequently) will be done in MSP and imported back into Oracle Projects. Does the above mentioned requirement work consistently in R 12.1.3? Please let us know.
Thanks
Regards,
Sri

The MSP integration requirements that you describe should work in the latest versions of 11i e.g. (FP.M RUP4) as well as R12.1.3.
My experience is that providing all scheduling is done in MSP then the integration functionality works well.
The recommended process flow for MSP integration is:-
•     Oracle Projects: A project manager creates a project in Oracle Projects from a project template containing information for deliverables, work breakdown structures, and resource assignments
•     MSP: The unscheduled resource and workplan data is downloaded to Microsoft Project for scheduling
•     MSP: The project is scheduled in Microsoft Project based on task assignments, task dependencies, task constraints, and other attributes
•     MSP: The scheduled workplan data is uploaded to Oracle Projects for publishing
•     Oracle Projects: The project workplan is published in Oracle Projects
•     Oracle Projects: After the workplan is published, the project is accessible to all team members working on the project. Team members work on their assignments and report their progress in Oracle Projects
•     Oracle Projects: The team members' progress on the tasks is collected for updating the project plan
•     Oracle Projects: The project plan is updated with the team members' progress
•     MSP: The project is now unscheduled. The unscheduled project plan is downloaded to Microsoft Project for rescheduling
•     MSP: The project plan is rescheduled in Microsoft Project and the task information is updated
•     Oracle Projects: The rescheduled workplan is uploaded to Oracle Projects for publication
Andy.

CFolder integration with SRM

SRM Sever 550 SP13
R3 4.7
CPRXRPM 4.0 SP11 (separate Server, not installed as add-on to SRM server)
Classic
When i create a colloboration folder from bid invitation by clicking create, the cfolder is created correctly. I can log on to cfolders directly and see that it created cFolder for bid invitation correctly. However, after clicking create button, and create button goes away and cFolder link is there, when i click on it, i recieve the following error message:
The following error text was processed in the system:
BSP Exception: the Application Name cfx_rfc_ui in URL /sap/bc/bsp/sap/cfx_rfc_ui/area_de.htm?p_col_id=DEB8F181971056F1ABF2001C23BE9EDD&p_area_id=DEB8F181971057F1ABF2001C23BE9EDD&p_role= is invalid.
My user ID, the creator of the bid invitation has all standard CFX roles assigned to it in the PLM server. The RFCUSER in the RFC destination has all the CFX roles assigned to it (in PLM server) and is integrated in to the SRM org.
Why role is invalid?
Couple of other questions, the complete URL in the error above has the SRM host name, so appears to me based on the URL that SRM is validating role, and the ICF service being called (cfx_rfc_ui) is also at the SRM level. There arent any CFX roles existing in SRM and /sap/bc/bsp/sap/cfx_rfc_ui doesnt exist in the SRM ICF framework. This may be nothing, i would of just expected when clicking the colloboration, it would take me to the PLM server.
It seems I have missed a piece of configuration or something? Do i need to install the CPRXRPM add-on to SRM to get this to work? Any insight is appreciated, I am at a total loss.
Again, the colloboration folder is being created in the background with no issues. RFC connections work. Once cfolder is created i am uable to accesss as buyer/rfx creator from the bid invitation. No issue if log directly in cFolders.
Please help SRM experts!
JF

Yes, i had to submit an OSS message that got kicked around a bit and ended up with development team at SAP. I spoke with the developer on the phone and if I remember correctly, he indicated one of the support packs activated the badi BBP_CHANGE_URL, can not be sure if this is the root cause as it was phone call and I have no documentation of root cause.
the fix was to de-activate the badi BBP_CHANGE_URL.
We did that, works fine, and did not affect any other business scnearios.
JF

SAP JAM integration with Cloud for Customer

I'm in the middle of the setup of the SAP JAM to C4C integration and using the guide here https://websmp109.sap-ag.de/~sapidb/012002523100002202222015E/C4C_JAM_WP_1502.pdf.
In section 2.4.1.1, it says "Contact your SuccessFactor, SAP Jam customer support or administrator to get the SuccessFactors Secured
Token Service certificate for your SAPJam company."
Since it is the first time I deal with SuccessFactors, I have no idea who to contact to get this "signing certificate". Do I need to contact the SF Cloud support team or is that something I can get on my own from our SuccessFactors instance?
Cheers

Hi Thierry,
in general the guide refers to opening a ticket in the SuccessFactors support portal to request the ticket. As this is your first implementation you probably don't have a registered user in here.
Question:
Do you have someone else on the project/at the customer to help with the basic implementation of the SuccessFactors Platform? If yes, please ask this person to open a ticket with SuccessFactors support.
If not, then you can also open the ticket directly in C4C and it should be internally routed to the appropriate support contact.
Please note: In addition you will also need to do some basic configuration of the SuccessFactors Platform and SAP Jam. More information about initial steps to access and setup
the SuccessFactors Platform for SAP Jam can be found in the document „Setting up SAP Jam for Integration with other SAP Solutions” included in the package “SAP Best Practice for SAP Cloud for Customer Integration” available at http://service.sap.com/rds-cfc-erp
If you are interested in more information, please check out the respective training offerings for SuccessFactors Platform and SAP Jam available as "Academy Courses".
Hope this helps,
Ingo

JCA adapter Integration with SOA suite

Hi all,
Where can I find documentation or reference regarding integration of third party adapter with SOA suite?
There is an option of Third Party Adapter in SOA project of JDeveloper. When I drag it onto the composite.xml file, a window comes up asking for wsdl, jca files, etc. So I would like to know if there is any example or tutorial on how to integrate a third party adapter with SOA suite. Thanks.
Regards,
K.Hein

Thanks Anuj!
It seems like a new way of integrating JCA adapter to SOA suite.
Actually, I was only aware of integrating as a third party adapter as mentioned in this article (http://www.oracle.com/technetwork/articles/luttikhuizen-adapters-091679.html) which require wsdl and jca files.
Are there any difference between those two approaches? Which would be the recommended approach for JCA adapter integration with SOA? Thanks again for your informative replies.
Regards,
Kyi Hein
Edited by: K Hein on Jan 18, 2011 12:30 AM

How to install Enterprise Manager to JDeveloper integrated Weblogic domain

I have installed JDeveloper 11g and as you know it also installs an embedded Weblogic and creates a Weblogic domain. This domain by default has the console application but does not have the em application. How can I add em to my integrated Weblogic?

Sturla,
I can give you the quick steps for installing EM into the WLS container integrated with JDev:
1). Download from OTN two pieces of software from the Fusion Middleware 11g (use the "For Deployment" software, click "See All"): the Application Development Runtime, and (under Additional Required Software) the Repository Creation Utility (RCU).
2). Unzip the RCU and run bin/rcu.bat or bin/rcu (windows/*nix). Create the MDS repository in an Oracle DB using this utility.
3). Install the application development runtime into the same home you installed JDeveloper.
4). Run the configuration wizard - on Windows its in the start menu / Oracle Fusion Middleware 11.1.1.1.0 / Weblogic Server 11gR1 / Tools. Find it yourself on *nix ;)
5). Choose to extend a domain
6). Pick your DefaultDomain directory for the integrated WLS
7). Tick the checkbox to add enterprise manager
8). Supply the database connection information for the DB in which you created the repository in step 2.
Ta-da!
The EM will be accessible via http://hostname:7001/em, username/password=weblogic/weblogic1. I will caution you about generically installing into the integrated domain - it makes your WLS take noticeably longer to start up...
Best,
John

JDeveloper Integration With CollabNet Team Forge

Similar Messages

Maybe you are looking for